How many molecules are there in 4.00 moles of glucose, C6H1206?​

The N=(tR/σ)2 the number of theoretical plates, the distillation the separation of a mixture of two liquids.

The effectiveness of a column is frequently determined using the number of theoretical plates. The range of plate numbers is 100 to 106. The quality of the separation improves with the number of theoretical plates present in a column because more equilibrations between the stationary and mobile phases are possible.

The effectiveness of a column's column is closely tied to theoretical plates in column chromatography. It can therefore help to increase resolution, which, when all other factors are held constant, is directly proportional to the square root of the number of theoretical plates.

To know more about Theoretical plates visit:

https://brainly.com/question/14801810

#SPJ4

Alanine is a member of the twenty key amino acids which might be used by our bodies to make proteins: Pyrrolysine (not utilized in human protein synthesis). of those 20 amino acids, nine amino acids are crucial: Phenylalanine. Valine. Tryptophan.

Alanine is an amino acid that is used to make proteins. it's miles used to break down tryptophan and diet B-6. it's miles a source of power for muscle mass and the central fearful gadget. It strengthens the immune device and helps the frame use sugars.

Alanine, or α-alanine, is an α-amino acid this is used in the biosynthesis of proteins. It contains an amine organization and a carboxylic acid organization, both connected to the valuable carbon atom which also contains a methyl institution facet chain. Alanine is an amino acid this is used to make proteins. it's miles used to interrupt down tryptophan and diet B-6. it's miles a supply of electricity for muscle tissue and the critical apprehensive gadget. It strengthens the immune system and allows the frame to use sugars.

Learn more about Alanine here:

https://brainly.com/question/16529318

#SPJ4

Thus, the consumption of 3 L of O₂ will produce 1.5 L of CO₂.

Methane is non-toxic and poses no danger when inhaled in small amounts, but if significant amounts of the gas are allowed to replace air, the lack of oxygen could cause suffocating.

In the reaction, CH₄+2O₂⇒CO₂+2H₂O

2 moles of O₂ consumption will produce 1 mole of CO₂.

In the gaseous phase, the relationship between the amount of compound and the volume is:  PV=nRT

The volume and the amount of the gaseous compound are proportionate at the same temperature and pressure.

Thus, the consumption of 3 L of O₂ will produce 1.5 L of CO₂.

To know more about Methane gas visit:

https://brainly.com/question/28003664

#SPJ4

The element that is able to gain electrons and form an ionic bond is Iodine.

The term ionic bond has to do with the kind of bond that is formed between a metal and a non metal. In this type of bond, there is a transfer of electrons from the metal to the non metal. s such the metal would become positively charged while the non metal would become negatively charged as we can see in the crystal of the ionic compound.

We just have to look at the string of elements that we have been given because, this is how we can be able to make a decision about which of the elements would be able to gain an electron. While doing this, we must keep in kind that it is only the non metal that are able to gain electron within the context of forming an ionic bond.

Learn more about ionic bond:https://brainly.com/question/9075398

#SPJ1

Missing parts;

Based on its electron configuration which element will most likely gain electrons from another element when forming an ionic compound? Potassium , Vanadium, Iodine, Xenon

Volume of 16.0 m aqueous ammonia solution required to prepare 500.0 ml of a 1.90 m solution is 50ml

Molarity is used to describe the concentration of a solution. Molarity, also called molarity, is the number of moles of solute (dissolved substance) per liter of solution. The unit of molarity is moles per cubic decimeter, written as mol dm⁻³ or simply M. A cubic decimeter is the same as a liter. In many old textbooks you can find concentrations in moles/liter written as mol l⁻¹

Original concentration x initial volume = final concentration x final volume.

We will use the equation (M₁)(V₁) = (M₂)(V₂)

Given,

M₁ = 16.0 m

M₂ = 1.90 m

V₂ = 500.0 ml or 0.5L

So, 16 × V₁ = 1.90 ×  0.5

16 V₁ = 0.9 m

V₁ = [tex]\frac{0.9}{16}[/tex]

V₁ = 0.05L or 50ml

To know more about molarity visit:

https://brainly.com/question/19517011

#SPJ4

The true statement is: It took the car the same amount of time to travel the first 10 meters as it did to travel the last 10 meters (Option C)

The following data were obtained from the question:

Now, we shall determine the time taken to travel the first 10 m. This is shown below:

Next, we shall determin the time taken to travel the last 10 m. This is shown below:

From the above illlustration, we can see clearly that it took the car the same time to travel the first 10 m and the last 10 m.

Thus, the true statement is option C: It took the car the same amount of time to travel the first 10 meters as it did to travel the last 10 meters

Learn more about time:

https://brainly.com/question/17146782

https://brainly.com/question/17228876

#SPJ1

(b) electronegativity decreases left to right across the periodic table

Electronegativity increases from left to right in a period across the periodic table.

Electronegativity is a relative property that defines the tendency to attract shared pair of electrons. It is a unitless parameter that is calculated by different formulae.

Pauling scale is widely used to calculate the electronegativity values of a covalent bond. e.g. F = 4.0, Cl = 3.0, etc.

⇒Electron affinity decreases from top to bottom in the periodic table.

⇒Atomic radii decrease from left to right in the periodic table.

⇒Ionization energy decreases from top to bottom in the periodic table.

The element that has in its family non-metals, metalloids, and metals, which is commonly used in the canning business and sometimes give soups a distinct taste and that is also been known to "cry" if you bend it too hard is tin.

What is tin?

Tin is a chemical element found in the periodic table with atomic number 50 and which has the symbol Sn.

The characteristics of tin include:

Because of its high resistance to corrosion and soft nature, tin has been used for a wide variety of purposes which include:

Learn more about tin at: https://brainly.com/question/2272323

#SPJ1

0.50 mol of H₂ and 1.0 mol of O₂ have the same average molecular kinetic energy at standard temperature and pressure

Mass of H₂ and O₂ can be found by the formula given below;

m=n × M

mass of H₂= 0.50 × 2= 1g

mass of O₂=1.0 ×16= 16g

The formula to find average kinetic energy is as follows

K=[tex]\frac{3}{2}[/tex]K[tex]B}[/tex]T where K[tex]{B}[/tex]= Boltzmann constant

According to the conditions given above i.e standard temperature and pressure.

K∝T

So it is independent of the quantity of the sample i.e how much the amount of sample is present.  

To know more about average kinetic energy click here

brainly.com/question/24134093

#SPJ4

Answer:

Globalization has many benefits, such as the increased flow of goods, services, capital, and people across borders. This has resulted in increased trade and investment, which has led to higher economic growth rates and improved standards of living around the world.

Explanation:

have a good day

As per the chemical reaction ,sodium hydroxide can be used for neutralization of sulfuric acid as,2 NaOH+H₂SO₄[tex]\rightarrow[/tex]Na₂SO₄ +2 H₂O.

Chemical reactions are defined as reactions which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical reaction.

There are several characteristics of chemical reactions like change in color, change in state , change in odor and change in composition . During chemical reaction there is also formation of precipitate an insoluble mass of substance or even evolution of gases.

There are three types of chemical reactions:

1) inorganic reactions

2)organic reactions

3) biochemical reactions

During chemical reactions atoms are rearranged and changes are accompanied by an energy change as new substances are formed.

Learn more about chemical reactions,here:

https://brainly.com/question/14929452

#SPJ1

Answer: 3.6 ml

Hope this helps!

The general period and group trends among the main-group elements with respect to each of the following properties are as follows:

Periodic trends are the trends followed by the properties of the elements going down a group or across a period in the periodic table.

The properties of elements that show periodic trends include:

a. atomic radii - the size of an atom of an element

b. first ionization energy - the energy required to remove a valence electron

c. electron affinity - the energy required to add an electron to a neutral atom

d. ionic radii - the size of the ion of an element

e. electronegativity - the ability to attract electrons

Learn more about periodic trends: https://brainly.com/question/28088037

#SPJ1

The molar mass of the acid is  65 g/mol.

We know that the term neutralization is applied to the reaction between an ad and a base that produces salt and water only. In this case, we have been told that  a monoprotic weak acid required 22. 50 ml of 0. 510 m sodium hydroxide to titrate it.

Let us recall that by the principle of the stoichiometry of the chemical reactions, the reaction between sodium hydroxide and a monoprotic acid has to be one is to one and we have to bear this in mind.

Thus;

Number of moles of sodium hydroxide = 22. 50/1000 L *  0. 510  M

= 0.0115 moles

This implies that 0.0115 moles of the acid was required also.

Since;

Number of moles = mass/molar mass

Molar mass =  mass/Number of moles

Molar mass =  0. 75 g /0.0115 moles

= 65 g/mol

Learn more about neutralization:https://brainly.com/question/27891712

#SPJ1

Answer: An ionic bond.

Explanation:An ionic bond is the force of attraction that holds together positive and negative ions. It forms when atoms of a metallic element give up electrons to atoms of a nonmetallic element. Ionic bonds form only between metals and nonmetals

The given statement exists as false. The temperature at which a liquid's vapor pressure equals the pressure of the gas above it exists comprehended as the boiling point of the liquid.

The temperature at which a liquid's vapor pressure equals the pressure around it and the liquid transforms into a vapor is known as the boiling point of a substance. A liquid's boiling point varies depending on the atmospheric pressure in the area.

The temperature at which a liquid's vapor pressure equals the pressure of the gas above it exists comprehended as the boiling point of the liquid. The temperature at which a liquid's vapor pressure equals one atmosphere is considered the liquid's typical boiling point (760 torr).

The element with the lowest temperature at which an element would smolder is helium, and the element with the highest temperature is tungsten. The melting point is measured in degrees Celsius (C).

To learn more about boiling point refer to:

https://brainly.com/question/40140

#SPJ4

Answer: The mass percent of copper in copper chloride is 47.23 %.

The mass in grams of 2.73×1024 molecules of methanol is 154.20g.

given that:

no. of molecules = 2.73 × 10²⁴

molar mass of methanol (CH₄O) = 34.04 g/mol

moles of methanol = no. of molecules / Na

                                =  2.73 × 10²⁴ / 6.022× 10²³

                                = 4.53 mol

now, formula for the no. of mole is given as :

no. of moles = mass / molar mass

mass = no. of mole × molar mass

mass = 4.53 ×34.04

mass = 154.20 g

Thus, the mass in grams of  2.73 × 10²⁴ molecules of methanol is 154.20 g

To learn more about no. of moles here

https://brainly.com/question/26416088

#SPJ1

Type of evidence can be pulled from both a computer and a portable device is images, text history, GPS coordinates

Computer is the machine that can store and process the information and it is an electronic device that manipulate information or data and type of  evidence can be pulled and collected from digital device is

The above all examples of information that can obtained from electric devices

Therefore, the digital evidence can be pulled from both a computer and a portable device is  images, text history, GPS coordinates

Know more about portable device

https://brainly.com/question/28650694

#SPJ1

We have to calculate the moles of PCl₅ in the given gram. divide the gram by molar mass. the number of moles is 0.267 moles

What is mole?

The mole is the amount of substance of a system which contains as many elementary entities as there are atoms in 0.012 kilogram of carbon 12.

To find out the number of moles using the following formula.

mole = mass/molarmass

The molar mass of the PCl₅ = molar mass of phasphorus+ 5x molar mass of chlorine.
The molar mass of the PCl₅= 208.24 g/mol
mole = 55.7g÷208.24g/mol =0.267 moles

To find more about Molar mass, refer the link below:

brainly.com/question/22503632

#SPJ2

Mole measure the number of elementary entities of a given substance that are present in a given sample. mass. The number of moles in 55.7 g of PCl₅ is 0.26 mole.

The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.

Mathematically,

mole =given mass ÷ molar mass

Molar mass of PCl₅= 208.24 g/mol

Given mass of PCl₅=  55.7 g

Substituting the given values we get

mole =55.7 g ÷208.24 g/mol

number of moles=0.26 mole

Therefore,  the number of moles in 55.7 g of PCl₅ is 0.26 mole.

To know more about mole, here:

https://brainly.com/question/15209553

#SPJ1

Answer:

Smaller Atomic Radius, High Ionization Affinity, and High Electron Affinity

[Note:  It is Br2, not B2, the bomber]

Explanation:

a) Smaller Atomic Radius  YES  Each of these elements have a high number of electrons that nearly fill the lower energy orbitals, forcing the protons in the nucleus to cluster togeter more tightly.

b) High Metallic Character NO

c) High Ionization Energy    YES  - They want to keep their electrons, so the ionization energy is high.

d) High Electron Affinity  YES  They attract electons from anything that comes nearby.

The orbital diagram shows us the number of electrons that can be found in the atom.

We know that the orbital is a region in pace where there is a high probability of finding the electron. We also know that the filling of the electrons into the respective orbitals where they fall in can be done by the use of the Aufbau principle.

According to the Aufbau principle, it is clear that in the filling of the electrons into the orbitals, the orbitals that are lesser in energy are first filled. The orbitals that are lesser in energy are always found quite close to the nucleus.

This implies that the relative energies of the orbitals would tend to increase as we move away from the nucleus. In other words, the nucleus is the part of the atom that would be at the lowest energy. The orbital diagram of iron by the use of the Aufbau principle have been shown in the image attached to this answer.

Learn more about orbital diagram:https://brainly.com/question/28809808

#SPJ1

There is only one sodium ion for every chlorine ion due to its valency.

The number of electrons that an atom needs to lose or gain in order to achieve a stable electron configuration i.e the octet of an element is known as the valency of an element, which serves as a gauge of that element's potential for combining.

The valency of Sodium (Na) is 1 and that of chlorine (Cl) is also one. therefore they combine to form a stable compound. The same rule follows in the compound formed by Potassium (K) and Oxygen(O) also. The valency of oxygen is 2 which means that it should be surrounded by 2 potassium ions to provide electrons to fulfill both the elements' octets.

To know more about valency, click on https://brainly.com/question/371590

There is  5.8 %  of NaOCl in the sample.

The oxidation of hypochlorite is the first process, which goes as follows:

OCl^- + 2I^- + 2H^+ -----> I2 + Cl2 + H2O

Iodine and sodium thiosulfate react in the second stage as follows:

I2 + 2NaS2O3 -----> Na2S4O6 + 2NaI

Thiosulfate moles = 0.150 M * 0.890/1000 L = 1.335 * 10-4 moles.

Since 2 molecules of thiosulfate react with 1 mole of I2,

1.335 * 10-4 moles of thiosulfate and x moles of I2 react.

x = 1.335 * 10-4 moles/2 moles times one mole.

Iodine equivalent to 6.675 x 10-5 moles

6.675 * 10-5 moles of hypochlorite were reacted because 1 mole of hypochlorite yields 1 mole of iodine.

Therefore, the mass of NaOCl is equal to 4.97 * 10-3 g (6.675 * 10-5 moles * 74.44 g/mole).

5.8% of NaOCl is equal to 4.97 * 10-3 g/0.0854 g * 100/1.

NaOCl makes up 5.8% of the sample.

To know more about bleach refer to https://brainly.com/question/13572752

#SPJ4

The percent ionization in the nitrous acid solution is 1.97% before, and 0.0999% after the addition of sodium nitrate, which lowered the ionization 19.7 times.

To calculate percent ionization, we need to use the expression for the acidity constant of nitrous acid:

[tex]Ka = \frac{[H^{+} ][NO_{2} ^{-} ]}{[HNO_{2} ]}[/tex]

Ka - acidity constant (for nitrous acid, 7.1 * 10⁻⁴)

[H⁺] - concentration of H⁺ ions

[NO₂⁻] - concentration of nitrite ions

[HNO₂] - concentration of unionized nitrous acid

[H⁺] = [NO₂⁻]

[HNO₂] = 1.80 M - X

[tex]7.1 * 10^{-4} = \frac{X^{2} }{1.80 - X}[/tex]

When we transform the equation above, we get a quadratic equation:

X² + 7.1 * 10⁻⁴X - 12.78 * 10⁻⁴ = 0

Once we solve for X, we get:

X = 0.0354 M

Because the concentration of H⁺ ions (X) is equal to the concentration of the ionized nitrous acid, the percent ionization will be:

%ion = 100% * X / 1.80 M

%ion = 100% * 0.0354 M / 1.80 M

%ion = 1.97%

The second calculation is actually easier because we can safely assume that, with added sodium nitrite, all nitrite ions come from the salt, and the amount coming from the acid is negligible. With that in mind, the expression for the acidity constant will look like this:

[tex]7.1 * 10^{-4} = \frac{X * 0.71 }{1.80 M - X}[/tex]

When rearranged, we get this equation:

0.71 * X = 12.78 * 10⁻⁴ M - 7.1 * 10⁻⁴X

0.71071 X = 12.78 * 10⁻⁴ M

X = 12.78 * 10⁻⁴ M / 0.71071

X = 0.001798 M

%ion = 100% * 0.001798 M / 1.80 M

%ion = 0.0999%

So the addition of sodium nitrite resulted in 1.97 / 0.0999 = 19.7 times lower ionization of the nitrous acid.

You can learn more about percent ionization here:

brainly.com/question/13161344

#SPJ4

Due to the presence of two reactants and a single product, both chemical reactions X and Y are possible.

A synthesis reaction results in the formation of a single product that is more complicated than the initial reactants when two or more reactants are present.

When two or more reactants unite to create a single product, the reaction is called a synthesis. The general equation A + B = AB is used to describe this kind of reaction.

According to the definition of synthesis reactions, two reactants unite to create a chemical. In a synthesis reaction, two or more substances mix chemically to generate a single compound or a product.

To know more about synthesis reaction visit:-

https://brainly.com/question/24936069

#SPJ13

Answer: A

Explanation: It said on Course Hero

Answer: Yes

Explanation: More reactive metals in the reactivity series can displace copper from copper oxide just leaving copper on its own after the reaction. But usually, carbon is used to displace copper as its safe and more reactive.

i don't know if you mean C° to F° but in F° the change would be 123.8°

The [tex]K_{a}[/tex] of phenylacetic acid is  4.76008×[tex]10^{-5}[/tex], when the pH of the solution is 2.62.

As we know,

pH = -log[[tex]H^{+}[/tex]]

[[tex]H^{+}[/tex]] = [tex]10^{-pH}[/tex]

[[tex]H^{+}[/tex]] = [tex]10^{-2.62}[/tex]

[[tex]H^{+}[/tex]] = 2.39×[tex]10^{-3}[/tex]

Also to find [tex]K_{a}[/tex] of phenylacetic acid we know another relation as:

[[tex]H^{+}[/tex]] = [tex]\sqrt{K_{a} .c}[/tex]

2.39×[tex]10^{-3}[/tex] =  [tex]\sqrt{K_{a} .0.12}[/tex]

[tex]K_{a}[/tex] = 4.76008×[tex]10^{-5}[/tex]

Therefore, the [tex]K_{a}[/tex] of phenylacetic acid is  4.76008×[tex]10^{-5}[/tex], when the pH of the solution is 2.62.

Learn more about phenylacetic acid here:

https://brainly.com/question/15908906

#SPJ4