How many moles of sodium (Na) atoms are found in 46 grams of sodium?

The energy hump corresponds to the energy barrier existing between the reactants and products. The reactants must first acquire a certain amount of energy to reach the level of threshold energy.

The minimum excess energy that the reactants must acquire so as to have energy equals to the threshold energy is the activation energy.

Activation energy =  Peak energy - Energy of reactant

1. 80 - 0 = 80 kJ

2. Here letter 'E' represents activation energy

3. Change in energy = Energy of product - energy of reactant

20 - 0 = 20 kJ

4. The reaction is endothermic

5. A catalyst does not change the activation energy, it is 80 kJ

6. The letter is also E.

To know more about activation energy, visit;

https://brainly.com/question/29250169

#SPJ1

Answer: The number of moles of carbon dioxide produced by 3.5 moles of baking soda is 3.5 moles.

Explanation:

1) Rearrange each rate law into an equation for a straight line (y=mx+b) 2) Plot y vs. x for each integrated rate law. 3) The linear plot indicates the order of reaction.

placing the steps in the correct order. Here's the proper sequence for determining reaction order from an integrated rate law:

1. Determine the integrated rate law for the reaction.
2. Rearrange each rate law into an equation for a straight line (y=mx+b).
3. Plot y vs. x for each integrated rate law.
4. The linear plot indicates the order of reaction.

Your answer: Determine the integrated rate law, rearrange it into a straight line equation, plot y vs. x, and identify the order of reaction from the linear plot.

to learn more about integrated rate law click here:

brainly.com/question/30379408

#SPJ11

Oxidation D) occurs when the electrons are lost from an atom or compound. Oxidation refers to a chemical reaction where there is a transfer of electrons from one substance to another.

During oxidation, the substance that loses electrons is known as the reducing agent while the substance that gains electrons is known as the oxidizing agent. When an atom or compound loses electrons during oxidation, it becomes more positively charged, and this results in a decrease in its negative charge.

For example, when iron rusts, it undergoes oxidation as it loses electrons to oxygen. The iron atoms lose their electrons, and as a result, they become positively charged. This causes the iron compound to have a more positive charge than it did before the oxidation process.

In summary, oxidation occurs when electrons are lost from an atom or compound, which results in a decrease in the negative charge of the compound or atom.

Learn more about oxidizing agent here:

brainly.com/question/10547418

#SPJ11

Therefore, the free energy change when 1.76 moles of Fe2O3(s) react at standard conditions is -271.5 kJ/mol.

To calculate the free energy change when 1.76 moles of Fe2O3(s) react at standard conditions, we need to use the standard thermodynamic data at 298K. The standard thermodynamic data provides us with the standard free energy change of formation for each compound involved in the reaction.

Using the given reaction equation, we can write the overall reaction as:

3Fe2O3(s) + H2(g) → 2Fe3O4(s) + H2O(g)

Using the standard free energy change of formation values for each compound, we can calculate the standard free energy change of the reaction (ΔG°rxn) using the equation:

ΔG°rxn = ΣnΔG°f(products) - ΣnΔG°f(reactants)

where Σn represents the sum of the stoichiometric coefficients of each compound.

At 298K, the standard free energy change of formation values for the compounds involved in the reaction are:

ΔG°f(Fe2O3) = -824.2 kJ/mol
ΔG°f(H2) = 0 kJ/mol
ΔG°f(Fe3O4) = -1118.5 kJ/mol
ΔG°f(H2O) = -237.2 kJ/mol

Plugging these values into the equation for ΔG°rxn, we get:

ΔG°rxn = (2 mol x (-1118.5 kJ/mol)) + (1 mol x (-237.2 kJ/mol)) - (3 mol x (-824.2 kJ/mol))
ΔG°rxn = -271.5 kJ/mol

Therefore, the free energy change when 1.76 moles of Fe2O3(s) react at standard conditions is -271.5 kJ/mol.

To know more about free energy change click here:

https://brainly.com/question/31170437

#SPJ11

Answer:

PH(potential of hydrogen) above 7 is alkaline

so PH 10.4 is alkaline

The compound with the highest melting point according to the ionic bonding model would be CaO (calcium oxide).

For more such question on melting point

https://brainly.com/question/25165129

#SPJ11

The correct answer to the question is (b) the equilibrium shifts to produce more NO when more oxygen gas is added to the initial reaction mixture. No extra catalyst is required to reach equilibrium. The reaction of nitrogen gas with oxygen gas to produce nitrogen oxide is represented by the equation N2(g) + O2(g) ⇌ 2NO(g).

When more oxygen gas is added to the initial reaction mixture, it will cause the equilibrium to shift to produce more nitrogen oxide (NO). This is because the reaction is endothermic and therefore, an increase in the concentration of reactants (oxygen gas) will drive the reaction in the forward direction to form more product (nitrogen oxide).
According to Le Chatelier's principle, when a system at equilibrium is disturbed, it will try to counteract the disturbance to re-establish equilibrium. In this case, the addition of oxygen gas causes a disturbance, which the system counters by increasing the rate of the forward reaction, resulting in an increase in the concentration of nitrogen oxide (NO).
Therefore, the correct answer to the question is (b) the equilibrium shifts to produce more NO when more oxygen gas is added to the initial reaction mixture. No extra catalyst is required to reach equilibrium, and the temperature of the reaction mixture may or may not change depending on the specific conditions of the reaction.

for more such questions on   equilibrium .

https://brainly.com/question/19340344

#SPJ11

The percent yield of zinc carbonate is 5.91%. This suggests that the reaction did not go to completion, and there was likely some loss of product during the experiment.

To find the percent yield of zinc carbonate, we need to compare the actual yield (what was obtained in the experiment) to the theoretical yield (what would be obtained if the reaction went to completion).

First, let's calculate the theoretical yield of zinc carbonate:

Now, let's calculate the percent yield:

The actual yield  [tex]ZnCO_{3}[/tex] is given as 12.6 g.

The percent yield is calculated as:

Learn more about zinc carbonate

https://brainly.com/question/31114294

#SPJ4

Full Question: A reaction between 1.7 moles of zinc iodide and excess sodium carbonate yields 12.6 grams of zinc carbonate. This is the equation for the reaction: Na2CO3 + ZnI2 → 2NaI + ZnCO3. What is the percent yield of zinc carbonate? The percent yield of zinc carbonate is %

The SRB (sulfate-reducing bacteria) is a type of bacteria that can reduce sulfate to sulfide. These bacteria can have an impact on the corrosion of metal pipes in various environments. Among the given options C) Accelerate corrosion of metal pipe in clay environments.

The SRB can accelerate the corrosion of metal pipes in clay environments. In these environments, the bacteria produce sulfide, which reacts with the metal surface, forming metal sulfides. This process leads to a localized breakdown of the protective film on the metal surface, exposing the underlying metal to further corrosion. Clay environments provide a suitable habitat for SRB, as they offer the necessary nutrients and anaerobic conditions that these bacteria require to thrive. Consequently, the presence of SRB in clay environments can increase the rate of corrosion of metal pipes, leading to potential failure and the need for costly repairs or replacement.

learn more about corrosion here.

https://brainly.com/question/30531478

#SPJ11

The pH of the buffer prepared by the student will be slightly lower than 4.76.

This is because when the student incorrectly measured the volume of NaC2H3O2, the total volume of the buffer increased from 100.00mL to 101.00mL. This further diluted the HC2H3O2, which shifted the equilibrium to the left and lowered the pH of the buffer solution.

Here correct option is B.

Furthermore, the amount of C2H3O2- added was higher than the amount of HC2H3O2 added, which also contributed to the lower pH. As a result, the buffer solution will have a slightly higher capacity for the addition of acids than for the addition of bases.

This is because the pH of the solution is lower than the pKa of the acid, so the solution will be able to resist changes in pH caused by the addition of acids better than it would by the addition of bases.

Know more about buffer solution here

https://brainly.com/question/24262133#

#SPJ11

Answer:

To answer these questions, we need to use stoichiometry and the ideal gas law.

1. To determine how many moles of ammonia will react with 4.6 moles of oxygen, we need to look at the balanced chemical equation and the mole ratio of ammonia to oxygen. From the balanced equation, we can see that 4 moles of NH3 react with 5 moles of O2. Therefore, we can set up a proportion:

4 moles NH3 / 5 moles O2 = x moles NH3 / 4.6 moles O2

Solving for x, we get:

x = 3.68 moles NH3

Therefore, 3.68 moles of ammonia will react with 4.6 moles of oxygen.

2. To determine how many milliliters of NO can be made by the reaction of 509 ml of oxygen, we need to use the ideal gas law. First, we need to find the number of moles of oxygen that react using the ideal gas law:

PV = nRT

n = PV/RT = (1 atm)(509 mL) / (0.0821 L·atm/mol·K)(273 K) = 20.1 x 10^-3 moles O2

From the balanced equation, we can see that 5 moles of O2 react with 4 moles of NO. Therefore, we can set up a proportion:

5 moles O2 / 4 moles NO = 20.1 x 10^-3 moles O2 / x moles NO

Solving for x, we get:

x = 16.1 x 10^-3 moles NO

Now, we can use the ideal gas law again to find the volume of NO produced:

PV = nRT

V = nRT/P = (16.1 x 10^-3 moles)(0.0821 L·atm/mol·K)(273 K) / (1 atm) = 0.35 L = 350 mL

Therefore, 350 mL of NO can be made by the reaction of 509 mL of oxygen.

3. To determine how many grams of oxygen must react to produce 27 L of NO measured at 7.00 °C and 5.31 atm, we need to use the ideal gas law again. First, we need to find the number of moles of NO using the ideal gas law:

PV = n

Explanation:

a. 3.68 moles of ammonia will react with 4.6 moles of oxygen.

b. 19.8 milliliters of NO can be produced from the reaction of 509 ml of oxygen.

c. Approximately 17,061.12 grams of oxygen must react to produce 27 L of NO measured at 7.00 °C and 5.31 atm.

To solve these stoichiometry problems, we'll use the balanced chemical equation and the given quantities to determine the required amounts.

The balanced chemical equation is:

4 NH₃(g) + 5 O₂(g) → 4 NO(g) + 6 H₂O(g)

a. To find how many moles of ammonia will react with 4.6 moles of oxygen, we'll use the mole ratio from the balanced equation. According to the equation, the ratio of NH₃ to O₂ is 4:5.

Given:

Moles of O₂ = 4.6 moles

Using the ratio, we can calculate the moles of NH₃:

Moles of NH₃ = (4/5) * Moles of O₂

Moles of NH₃ = (4/5) * 4.6 moles

Moles of NH₃ = 3.68 moles

Therefore, 3.68 moles of ammonia will react with 4.6 moles of oxygen.

b. To determine how many milliliters of NO can be made by the reaction of 509 ml of oxygen, we'll again use the mole ratio from the balanced equation. This time, we need to convert the volume from milliliters to liters and then use the ideal gas law to find the number of moles of NO.

Given:

Volume of O₂ = 509 ml

Temperature = Constant

Pressure = Constant

First, we convert the volume to liters:

Volume of O₂ = 509 ml ÷ 1000

Volume of O₂ = 0.509 L

Next, we'll use the ideal gas law to calculate the moles of O₂:

PV = nRT

Where:

P = Pressure

V = Volume

n = Moles

R = Ideal gas constant

T = Temperature

Since pressure and temperature are constant, we can rewrite the equation as:

V / n = constant

Using the mole ratio from the balanced equation (5:4), we can determine the moles of NO:

(Moles of O₂) / (Mole ratio O₂:NO) = Moles of NO

0.509 L / (5/4) = Moles of NO

0.509 L * (4/5) = Moles of NO

0.4072 moles = Moles of NO

Now, we need to convert moles of NO to milliliters using the ideal gas law again:

PV = nRT

Where:

P = Pressure

V = Volume

n = Moles

R = Ideal gas constant

T = Temperature

We'll assume ideal gas behavior, so we'll use the ideal gas constant (R = 0.0821 L·atm/(mol·K)).

Using the given pressure and temperature, we can rearrange the ideal gas law equation to solve for volume:

V = (nRT) / P

Converting the temperature to Kelvin:

Temperature = 7.00 °C + 273.15 = 280.15 K

Converting pressure from atm to millimeters of mercury (mmHg):

Pressure = 5.31 atm * 760 mmHg/atm

Pressure = 4033.76 mmHg

Now we can calculate the volume of NO:

V = (0.4072 moles * 0.0821 L·atm/(mol·K) * 280.15 K) / 4033.76 mmHg

V = 0.0198 L = 19.8 ml

Therefore, 19.8 milliliters of NO can be produced from the reaction of 509 ml of oxygen.

c. To find the grams of oxygen required to produce 27 L of NO, we'll again use the mole ratio from the balanced equation and the ideal gas law.

Given:

Volume of NO = 27 L

Temperature = 7.00 °C = 280.15 K

Pressure = 5.31 atm

First, we need to calculate the moles of NO:

Using the ideal gas law:

PV = nRT

Where:

P = Pressure

V = Volume

n = Moles

R = Ideal gas constant

T = Temperature

Converting pressure from atm to millimeters of mercury (mmHg):

Pressure = 5.31 atm * 760 mmHg/atm

Pressure = 4033.76 mmHg

Now we can calculate the moles of NO:

n = (PV) / (RT)

n = (4033.76 mmHg * 27 L) / (0.0821 L·atm/(mol·K) * 280.15 K)

n ≈ 424.68 moles

Using the mole ratio from the balanced equation (5:4), we can determine the moles of oxygen:

Moles of O₂ = (Moles of NO) / (Mole ratio O₂:NO)

Moles of O₂ = 424.68 moles * (5/4)

Moles of O₂ ≈ 530.85 moles

Finally, we'll calculate the mass of oxygen:

Mass of O₂ = Moles of O₂ * Molar mass of O₂

The molar mass of O₂ is 32 g/mol (16 g/mol for each oxygen atom).

Mass of O₂ = 530.85 moles * 32 g/mol

Mass of O₂ ≈ 17,061.12 grams

Therefore, approximately 17,061.12 grams of oxygen must react to produce 27 L of NO measured at 7.00 °C and 5.31 atm.

To know more about oxygen:

https://brainly.com/question/29149641

#SPJ2

Complete question is:

4 NH3(g) + 5 O2(g) 4 NO(g) + 6 H2O(g)

a. How many moles of ammonia will react with 4.6 moles of oxygen?

b. At constant temperature and pressure, how many milliliters of NO can be made by the reaction of 509 ml of oxygen?

c. How many grams of oxygen must react to produce 27 L of NO measured at 7.00 °C and 5.31 atm.

In the liberal arts and humanities, MLA (Modern Language Association) style is most frequently used to compose papers and cite sources.

Thus, Brief parenthetical citations in the text that are keyed to an alphabetical list of the works cited at the end of the work are a feature of the MLA style.

With the publication of the most recent edition, the MLA citation style has undergone substantial alterations.

Building trust in the knowledge and ideas we share with one another may be more crucial than ever, and for almost a century, this has been the guiding principle of MLA style, a set of writing and documentation.

Thus, In the liberal arts and humanities, MLA (Modern Language Association) style is most frequently used to compose papers and cite sources.

Learn more about MLA, refer to the link:

https://brainly.com/question/28567993

#SPJ1

All three domains of life (Bacteria, Archaea, and Eukarya) are complex in their own ways.

Bacteria and Archaea are both prokaryotic and lack a nucleus and other membrane-bound organelles, but they are still able to perform many complex functions.

Eukarya, on the other hand, are characterized by the presence of a nucleus and other membrane-bound organelles, which allows for even greater complexity and specialization of cell functions.

Thus, it is difficult to say which domain is the most complex as every domain has certain unique features.

Learn more about Bacteria, here:

https://brainly.com/question/8008968

#SPJ1

The complete table that figures out which particles affect each component of the atomic symbol is attached below.

Particles such as protons, neutrons, and electrons affect the atomic symbol in different ways:

Protons determine the element symbol. Each element has a unique number of protons in its nucleus, which is also known as its atomic number.

Electrons determine the charge of the atom. If the number of electrons is equal to the number of protons, the atom is electrically neutral.

Neutrons, along with protons, determine the atomic mass of the atom. The atomic mass is the sum of the number of protons and neutrons in the nucleus of an atom.

Find out more on particles here: https://brainly.com/question/27911483

#SPJ1

Answer:

d

Explanation:

The incomplete combustion of ethane, there should have been 2 ethane molecules (C₂H₆) and 5 oxygen molecules (O₂) present in the reactants.

The incomplete combustion of ethane producing carbon monoxide, we first need to determine the balanced chemical equation for this process. An incomplete combustion typically involves a limited supply of oxygen. The general equation for the incomplete combustion of ethane (C₂H₆) can be represented as:

C₂H₆ + O₂ → CO + H₂O

To balance the equation, we would have:

2C₂H₆ + 5O₂ → 4CO + 6H₂O

In this balanced equation, the reactants include 2 particles of ethane (C₂H₆) and 5 particles of oxygen (O₂).

Learn more about incomplete combustion: https://brainly.com/question/14335621

#SPJ11

An ore is a mineral from which a metal can be extracted profitably. The profitability of an ore depends on various factors such as the concentration of the metal in the ore, the accessibility of the ore, the cost of extraction, and the demand for the metal in the market.

For more such question on ore

https://brainly.com/question/89259

#SPJ11

The correcct answer for the statement "During the electrolysis of aqueous potassium iodide" is gas bubbles form at both platinum electrodes.

At the anode (positive electrode), iodine is formed, leading to a brown color at one electrode. Simultaneously, at the cathode (negative electrode), hydrogen gas is produced, causing gas bubbles to appear. The brown color at the anode does not disappear at the other electrode, as it is a product of the electrolysis.
It is important to note that copper is not plated onto one of the electrodes in this process, as no copper ions are present in the solution. Additionally, the indicator turning pink, yellow, or blue is not observed in this case, as these color changes are associated with pH indicators in acidic or basic solutions, which is not relevant to the electrolysis of potassium iodide.
In summary, during the electrolysis of aqueous potassium iodide, gas bubbles form at both platinum electrodes, a brown color forms at one electrode due to the production of iodine, and hydrogen gas is produced at the other electrode. There is no involvement of copper plating or color changes related to pH indicators in this process.

for more such question on electrolysis

https://brainly.com/question/30566972

#SPJ11

The labelling can be done as C=reactant, E=energy is released and D=Product. The type of reaction the reaction profile represents is exothermic reaction.

Exothermic reactions are chemical naturally occurring and are distinguished by the discharge of energy within the shape of heat or light. One instance of this kind of reaction, when the release comes in the manner of both light and heat, is lighting a match.

The exothermic reaction results in the release of energy as opposed to an endothermic response, which absorbs energy. This energy frequently exceeds the sum of the energies of the reactants. The labelling can be done as C=reactant, E=energy is released and D=Product. The type of reaction the reaction profile represents is exothermic reaction.

To know more about Exothermic reaction, here:

https://brainly.com/question/10373907

#SPJ1

The type of sampling system that uses a pump to draw air over a sorbent material is an active sampling system.

Active sampling systems use a pump to draw air over a sorbent material in order to collect a sample. The pump creates a vacuum to draw air from the environment and then passes it over a sorbent material such as activated charcoal or silica gel. The sorbent material collects particles, gases and vapors from the air, which can then be analyzed. This type of system is ideal for measuring short-term, intermittent exposure to pollutants and is often used to monitor workplace air quality.

To learn more about silica gel click here https://brainly.com/question/30009290

#SPJ11

The acid mantle is formed by a combination of sweat and sebum secretions from our skin. These secretions create a slightly acidic environment on the skin's surface.

The acid mantle is formed by a combination of sebum (oil) secreted by the skin's sebaceous glands and sweat secreted by sweat glands. The sebum and sweat combine to create a slightly acidic film on the surface of the skin, which helps to protect it from harmful bacteria and environmental pollutants. This film also helps to keep the skin hydrated and maintain its natural pH balance.

To learn more about, acid mantle, click here, https://brainly.com/question/26466242

#SPJ11

The pH of the solution is 3.62.

pH = -log[H+]

where [H+] is the concentration of hydrogen ions in moles per liter (mol/L) and log represents the logarithm to the base 10.

Substituting the given value of [H+] into the formula, we get:

pH = -log(2.4E-4)

pH = -(-3.62)

pH = 3.62

pH is a measure of the acidity or basicity of a solution, and it stands for "power of hydrogen". It is defined as the negative logarithm (base 10) of the concentration of hydrogen ions in the solution. The pH scale ranges from 0 to 14, where pH 7 is considered neutral, pH values below 7 indicate an acidic solution, and pH values above 7 indicate a basic solution.

The pH of a solution can be measured using a pH meter or pH paper, which changes color depending on the pH of the solution. Acids are substances that donate hydrogen ions, while bases are substances that accept hydrogen ions. When an acid and a base are mixed together, they undergo a neutralization reaction, forming water and salt.

To learn more about pH visit here:

brainly.com/question/2288405

#SPJ4

The changes in the initial concentrations of the common ions can be neglected,

(a) [[tex]Tl^+[/tex]] = 6.6 x [tex]10^{-9}[/tex] M

(b) [[tex]Pb^{2+}[/tex]] = 1.5 x [tex]10^{-8}[/tex] M

(c) [[tex]Ag^+[/tex]] = 0.505 M, [[tex]CrO_4^{2-}[/tex]] = 0.505 M

(a) Since TlCl is a salt, it will dissociate into its constituent ions in solution. The balanced equation for the dissociation of TlCl is:

TlCl(s) ⇌ [tex]Tl^+[/tex](aq) + [tex]Cl^-[/tex](aq)

Since the solution also contains 1.250 M HCl, we can assume that the concentration of [tex]Cl^-[/tex] is negligible, and the reaction will proceed to the right to establish equilibrium. Therefore, the concentration of Tl+ in the solution will be equal to the solubility product of TlCl:

Ksp = [[tex]Tl^+[/tex]][[tex]Cl^-[/tex]]

Since the concentration of [tex]Cl^-[/tex] is negligible, we can assume that [[tex]Cl^-[/tex]] = 0. Therefore,

Ksp = [[tex]Tl^+[/tex]][[tex]Cl^-[/tex]] = [[tex]Tl^+[/tex]][0] = [Tl+]²

Ksp = 4.3 x [tex]10^{-17}[/tex] (from a table)

[Tl+] = √(Ksp) = 6.6 x [tex]10^{-9}[/tex] M

(b) The balanced equation for the dissociation of [tex]PbI_2[/tex] is:

[tex]PbI_2[/tex](s) ⇌ [tex]Pb^{2+}[/tex](aq) + 2[tex]I^-[/tex](aq)

The solubility product expression for [tex]PbI_2[/tex] is:

Ksp = [[tex]Pb^{2+}[/tex]][[tex]I^-[/tex]]²

Since the solution also contains 0.0355 M [tex]CaI_2[/tex], the concentration of [tex]I^-[/tex] will be:

[[tex]I^-[/tex]] = 2[[tex]Ca^{2+}[/tex]] = 2(0.0355 M) = 0.071 M

Therefore,

Ksp = [[tex]Pb^{2+}[/tex]][[tex]I^-[/tex]]² = [[tex]Pb^{2+}[/tex]](0.071 M)²

Ksp = 7.9 x [tex]10^{-9}[/tex] (from a table)

[[tex]Pb^{2+}[/tex]] = Ksp/(0.071 M)² = 1.5 x [tex]10^{-8}[/tex] M

(c) The balanced equation for the dissociation of [tex]Ag_2CrO_4[/tex] is:

[tex]Ag_2CrO_4[/tex](s) ⇌ 2[tex]Ag^+[/tex](aq) + [tex]CrO_4^{2-}[/tex](aq)

The solubility product expression for [tex]Ag_2CrO_4[/tex] is:

Ksp = [[tex]Ag^+[/tex]]²[[tex]CrO_4^{2-}[/tex]]

Since the solution contains 0.856 g of [tex]K_2CrO_4[/tex] in 0.225 L, the concentration of [tex]K_2CrO_4[/tex] is:

0.856 g / (2 x 39.10 g/mol + 4 x 16.00 g/mol) / 0.225 L = 0.505 M

The reaction for the dissolution of [tex]Ag_2CrO_4[/tex] is:

[tex]Ag_2CrO_4[/tex](s) ⇌ 2[tex]Ag^+[/tex](aq) + [tex]CrO_4^{2-}[/tex](aq)

Since the initial concentration of [tex]CrO_4^{2-}[/tex] is zero and the solubility product of [tex]Ag_2CrO_4[/tex] is Ksp = 1.1 x [tex]10^{-12}[/tex], we can assume that the dissolution of [tex]Ag_2CrO_4[/tex] is complete and that the concentration of [tex]Ag^+[/tex] is equal to the initial concentration of [tex]K_2CrO_4[/tex], which is 0.505 M. Therefore, the concentration of [tex]Ag^+[/tex] is 0.505 M, and the concentration of [tex]CrO_4^{2-}[/tex] is also 0.505 M.

Learn more about the concentrations at

https://brainly.com/question/31259355

#SPJ4

Answer:

The volume of isopropyl alcohol in the solution is 178.5 ml, which is approximately 85% of the total volume of the solution.

Explanation:

To calculate the volume of isopropyl alcohol in the solution, we can use the following formula:

The volume of isopropyl alcohol = Percentage of isopropyl alcohol x Volume of solution

Substituting the given values, we have:

The Volume of isopropyl alcohol = 0.85 x 210 ml

The volume of isopropyl alcohol = 178.5 ml

Therefore, 178.5 ml of the solution is made up of isopropyl alcohol.

The EPA stream quality indicator for dissolved oxygen in stream water is:c. 5 mg per liter

Dissolved oxygen (DO) is an important indicator of the health of a water body. The EPA (Environmental Protection Agency) has set guidelines for the minimum dissolved oxygen levels to support a healthy aquatic ecosystem. For streams, the recommended minimum level of dissolved oxygen is 5 mg per liter. This level ensures that the water can support a diverse range of aquatic life, including fish, invertebrates, and other organisms.
To maintain good water quality, it's essential to regularly monitor dissolved oxygen levels using various sampling methods and equipment. If dissolved oxygen levels drop below the recommended threshold, it can indicate problems such as pollution or excessive nutrient loading, which can lead to eutrophication and negatively impact the ecosystem.

Learn more about Dissolved oxygen Refer: https://brainly.com/question/29027453

#SPJ11

Answer:

On average, a driver's side airbag can inflate to a volume of around 60 to 80 liters (16 to 21 gallons), while a passenger's side airbag can inflate to a volume of around 100 to 120 liters (26 to 32 gallons).

Explanation:

The reaction in an airbag involves several elements and compounds, including:

1. Sodium azide (NaN3): This is a primary component of the propellant used in most airbag systems. When heated, sodium azide decomposes into nitrogen gas (N2) and sodium metal.

2. Potassium nitrate (KNO3): This is another component of the propellant that provides additional oxygen to support the combustion of sodium azide.

3. Silica (SiO2): This is a common material used in the manufacture of airbag fabrics. When the airbag inflates, the silica particles in the fabric help to prevent the bag from tearing or puncturing.

4. Nitrogen gas (N2): This is the primary gas produced during the airbag reaction. The nitrogen gas is used to inflate the airbag quickly and provide a cushion between the vehicle occupant and hard surfaces.

5. Carbon dioxide (CO2): This is a secondary gas produced during the airbag reaction. The CO2 is produced as a result of the combustion of sodium azide and the reaction between sodium metal and water vapor present in the air.

The major product of [tex]CH_{3} CH_{2}[/tex] and [tex]Br_{2}[/tex] reaction is 1,2-dibromoethane, with anti-stereochemistry, and optically inactive stereoisomers.

The response somewhere in the range of [tex]CH_{3} CH_{2}[/tex] and [tex]Br_{2}[/tex] will go through a halogenation response, where the bromine molecules will be added across the twofold bond. The significant result of this response is 1,2-dibromoethane.

The component of this response includes the development of a bromonium particle halfway, where the bromine atom is captivated by the twofold obligation of the alkene. The bromine particle will then, at that point, assault one of the carbons of the twofold bond, framing a bromonium particle halfway.

The bromine particle will then go after the other carbon of the twofold bond, breaking the bromonium particle middle and framing the item.The option of the bromine particles to the twofold bond happens with against stereochemistry, implying that the two bromine molecules will be added to inverse countenances of the twofold bond.

This outcomes in the development of a meso compound with two stereoisomers. Be that as it may, since both stereoisomers have an inward plane of balance, they are optically latent.

In this way, the significant result of the response somewhere in the range of [tex]CH_{3} CH_{2}[/tex] and [tex]Br_{2}[/tex] is 1,2-dibromoethane, with two stereoisomers that are optically dormant because of their inward plane of evenness.

To learn more about stereochemistry reactions, refer:

https://brainly.com/question/29748314

#SPJ4

83.3 mL is required to provide 0.125mol KOH

Explanation:

We know that,

V=[tex]\frac{n}{c}[/tex] where n=number of moles, c= concentration and V=volume

According to the question,

c=1.50M and n=0.125 mol

Substituting the values,

V=[tex]\frac{0.125mol}{1.50M}[/tex]

=0.0833L

The volume should be in mL,

0.0833L× [tex]\frac{1000mL}{1L}[/tex]

= 83.3mL