How much power appears in one sideband of an AM signal of a 5-kW transmitter modulated by 80 percent?

Answer: As to the more sophisticated way of detecting "smoke" from an object a human may use in hotel rooms, this sensor called a Fresh Air Sensor does not just detect and, and but alerts the management about a smoking incident in a hotel room

The seismic response of nuclear power plant structures is often calculated using lumped parameter methods. A finite element model of the structure is coupled to the soil with a spring-dashpot system used to represent the interaction process. The parameters of the interaction model are based on analytic solutions to simple problems which are idealizations of the actual problems of interest. The objective of the work reported in this paper is to compare predicted responses using the standard lumped parameter models with experimental data. These comparisons are shown to be good for a fairly uniform soil system and for loadings that do not result in nonlinear interaction effects such as liftoff. 7 references, 7 figures.

Answer:

Option A is correct

Explanation:

As we know  

Inductive Susceptance = ½(pi)*f*L

Or  Inductive Susceptance is inversely  proportional to the frequency

Likewise conductive Susceptance = 2 (pi)*f*C

Conductive Susceptance is directly proportional to the frequency

When the frequency will reach the value zero, then the Inductive Susceptance will become infinite

Hence, inductor will dominate in determining the equivalent impedance of this parallel combination

Option A

Answer:

The rate at which entropy is produced within the turbine is 22.762 kilojoules per kilogram-Kelvin.

Explanation:

By either the Principle of Mass Conservation and First and Second Laws of Thermodynamics, we model the steam turbine by the two equations described below:

Principle of Mass Conservation

[tex]\dot m_{in} - \dot m_{out} = 0[/tex] (1)

First Law of Thermodynamics

[tex]-\dot Q_{out} + \dot m \cdot \left[h_{in}-h_{out}+ \frac{1}{2}\cdot (v_{in}^{2}-v_{out}^{2}) - w_{out} \right] = 0[/tex] (2)

Second Law of Thermodynamics

[tex]-\frac{\dot Q_{out}}{T_{out}} + \dot m\cdot (s_{in}-s_{out}) + \dot S_{gen} = 0[/tex] (3)

By dividing each each expression by [tex]\dot m[/tex], we have the following system of equations:

[tex]-q_{out} + h_{in}-h_{out} + \frac{1}{2}\cdot (v_{in}^{2}-v_{out}^{2}) - w_{out} = 0[/tex] (2b)

[tex]-\frac{q_{out}}{T_{out}} + s_{in}-s_{out} + s_{gen} = 0[/tex] (3b)

Where:

[tex]\dot Q_{out}[/tex] - Heat transfer rate between the turbine and its surroundings, in kilowatts.

[tex]q_{out}[/tex] - Specific heat transfer between the turbine and its surroundings, in kilojoules per kilogram.

[tex]T_{out}[/tex] - Outer surface temperature of the turbine, in Kelvin.

[tex]\dot m[/tex] - Mass flow rate through the turbine, in kilograms per second.

[tex]h_{in}[/tex], [tex]h_{out}[/tex] - Specific enthalpy of water at inlet and outlet, in kilojoules per kilogram.

[tex]v_{in}[/tex], [tex]v_{out}[/tex] - Speed of water at inlet and outlet, in meters per second.

[tex]w_{out}[/tex] - Specific work of the turbine, in kilojoules per kilogram.

[tex]s_{in}[/tex], [tex]s_{out}[/tex] - Specific entropy of water at inlet and outlet, in kilojoules per kilogram-Kelvin.

[tex]s_{gen}[/tex] - Specific generated entropy, in kilojoules per kilogram-Kelvin.

By property charts for steam, we get the following information:

Inlet

[tex]T = 400\,^{\circ}C[/tex], [tex]p = 3000\,kPa[/tex], [tex]h = 3231.7\,\frac{kJ}{kg}[/tex], [tex]s = 6.9235\,\frac{kJ}{kg\cdot K}[/tex]

Outlet

[tex]T = 100\,^{\circ}C[/tex], [tex]p = 101.42\,kPa[/tex], [tex]h = 2675.6\,\frac{kJ}{kg}[/tex], [tex]s = 7.3542\,\frac{kJ}{kg\cdot K}[/tex]

If we know that [tex]h_{in} = 3231.7\,\frac{kJ}{kg}[/tex], [tex]h_{out} = 2675.6\,\frac{kJ}{kg}[/tex], [tex]v_{in} = 160\,\frac{m}{s}[/tex], [tex]v_{out} = 100\,\frac{m}{s}[/tex], [tex]w_{out} = 540\,\frac{kJ}{kg}[/tex], [tex]T_{out} = 350\,K[/tex], [tex]s_{in} = 6.9235\,\frac{kJ}{kg\cdot K}[/tex] and [tex]s_{out} = 7.3542\,\frac{kJ}{kg\cdot K}[/tex], then the rate at which entropy is produced withing the turbine is:

[tex]q_{out} = h_{in} - h_{out} + \frac{1}{2}\cdot (v_{in}^{2}-v_{out}^{2})-w_{out}[/tex]

[tex]q_{out} = 3231.7\,\frac{kJ}{kg} - 2675.6\,\frac{kJ}{kg} + \frac{1}{2}\cdot \left[\left(160\,\frac{m}{s} \right)^{2}-\left(100\,\frac{m}{s} \right)^{2}\right] - 540\,\frac{kJ}{kg}[/tex]

[tex]q_{out} = 7816.1\,\frac{kJ}{kg}[/tex]

[tex]s_{gen} = \frac{q_{out}}{T_{out}}+s_{out}-s_{in}[/tex]

[tex]s_{gen} = \frac{7816.1\,\frac{kJ}{kg} }{350\,K} + 7.3542\,\frac{kJ}{kg\cdot K} - 6.9235\,\frac{kJ}{kg\cdot K}[/tex]

[tex]s_{gen} = 22.762\,\frac{kJ}{kg\cdot K}[/tex]

The rate at which entropy is produced within the turbine is 22.762 kilojoules per kilogram-Kelvin.

Answer:

L = Henry

C = Farad

Explanation:

The electrical parameter represented as L is the inductance whose unit is Henry(H).

The electrical parameter represented as C is the inductance whose unit is Farad

Resonance frequency occurs when the applied period force is equal to the natural frequency of the system upon which the force acts :

To obtain :

At resonance, Inductive reactance = capacitive reactance

Equate the inductive and capacitive reactance

Inductive reactance(Xl) = 2πFL

Capacitive Reactance(Xc) = 1/2πFC

Inductive reactance(Xl) = Capacitive Reactance(Xc)

2πFL = 1/2πFC

Multiplying both sides by F

F * 2πFL = F * 1/2πFC

2πF²L = 1/2πC

Isolating F²

F² = 1/2πC2πL

F² = 1/4π²LC

Take the square root of both sides to make F the subject

F = √1 / √4π²LC

F = 1 /2π√LC

Hence, the proof.