how much time will pass when it goes from one-half initial voltage to one-fourth its initial voltage

Answers

Answer 1

The time taken is twice the time taken to decrease from the initial voltage to one-half initial voltage.

How much time will pass when it goes from one-half initial voltage to one-fourth its initial voltage?

The amount of time it takes for a voltage to decrease from one level to another depends on the characteristics of the system generating the voltage.

Assuming that the voltage is decreasing exponentially over time, the time it takes for a voltage to decrease from one level to another can be calculated using the formula:

[tex]t = -(ln(Vf/Vi))/λ[/tex]

where t is the time taken, Vi is the initial voltage, Vf is the final voltage, and λ is the decay constant of the system generating the voltage.

If the voltage decreases from one-half its initial voltage to one-fourth its initial voltage, then [tex]Vi = 1, Vf = 1/4[/tex], and the voltage has decreased by a factor of 2.

Assuming that the decay is exponential, the time it takes to decrease by a factor of 2 is:

[tex]t = -(ln(1/2))/λ[/tex]

We can simplify this expression using the fact that [tex]ln(1/2) = -ln(2)[/tex], which gives:

[tex]t = ln(2)/λ[/tex]

Similarly, the time it takes to decrease by a factor of 4 is:

[tex]t = -(ln(1/4))/λ = ln(4)/λ = 2ln(2)/λ[/tex]

So, the ratio of the time taken to decrease from one-half initial voltage to one-fourth initial voltage is:

[tex]t(1/4) / t(1/2) = (2ln(2)/λ) / (ln(2)/λ) = 2[/tex]

Therefore, the time taken to decrease from one-half initial voltage to one-fourth initial voltage is twice the time taken to decrease from the initial voltage to one-half initial voltage.

Learn more about voltage

brainly.com/question/29445057

#SPJ11


Related Questions

hydrolysis is more common in a(n) _____ climate

Answers

Hydrolysis is a chemical reaction in which water is used to break down complex molecules into simpler ones.

This process is more common in a humid or wet climate. In such climates, water is readily available and tends to accumulate in soils and rocks, leading to the formation of aqueous solutions. These solutions can then react with various minerals and organic compounds, promoting hydrolysis. Moreover, the presence of high temperatures and abundant vegetation in tropical climates accelerates the process of hydrolysis.

This results in the decomposition of organic matter, which releases nutrients and minerals that can support plant growth. Overall, hydrolysis plays a crucial role in many environmental processes and is particularly important in regions with high moisture levels.

Learn more about complex molecules

https://brainly.com/question/30336127

#SPJ4

Water is utilised in a chemical procedure called hydrolysis to convert complicated molecules into simpler ones.

A humid or moist climate favours this procedure more frequently. In such environments, water is easily accessible and has a propensity to build up in rocks and soils, resulting in the creation of aqueous solutions. The subsequent reactions between these solutions and different minerals and organic molecules can encourage hydrolysis. Additionally, tropical areas' high temperatures and plenty of flora hasten the hydrolysis process.

This causes organic materials to decompose, releasing nutrients and minerals that can help plants flourish. Overall, hydrolysis is critical to many environmental processes and is especially significant in areas with high levels of moisture.

learn more about complicated molecules here:

https://brainly.com/question/13443071

#SPJ11

a 650 nm laser shines through a diffraction grating. the first bright band is 0.54 m from the center. another laser is only deflected to 0.42 m from the center. what is the wavelength of this light?

Answers

The second laser has a wavelength of around 835.71 nm.

What is the diffraction grating's level formula?

N = 1/ d, where d is the grating spacing, is the number of slits per metre on the grating. At a given order and wavelength, the angle of diffraction rises as d value falls. In other words, as the number of slits per metre grows, so does the angle of diffraction.

d sinθ = mλ

sinθ₁ = (0.54 m) / d

For the second laser, m = 1 again and the distance from the center is 0.42 m. We can solve for sinθ₂:

sinθ₂ = (0.42 m) / d

Since the spacing of the diffraction grating is the same for both lasers, we can set the two equations equal to each other and solve for λ:

d sinθ₁ = d sinθ₂

(0.54 m) / λ = (0.42 m) / λ

Simplifying, we get:

λ = (0.54 m * 650 nm) / 0.42 m

λ = 835.71 nm

To know more about wavelength visit:-

https://brainly.com/question/13533093

#SPJ1

Question:

A laser with a wavelength of 650 nm shines through a diffraction grating. The first bright band is observed at a distance of 0.54 m from the center. Another laser is shone through the same grating and is deflected to a distance of 0.42 m from the center. What is the wavelength of the second laser?

a workman carries some lumber up a staircase. the workman moves 9.6 m vertically and 22 m horizontally. if the lumber weighs 45 n, how much work was done by the workman?

Answers

The total work done by the workman was 432 joules

The workman lifted the lumber a vertical distance of 9.6 m, which means he did work against gravity. The amount of work done is equal to the force (weight of the lumber) multiplied by the distance it was lifted:

Work = force x distance

Work = 45 N x 9.6 m

Work = 432 joules

In addition to lifting the lumber, the workman also moved it horizontally a distance of 22 m. However, since the lumber was not lifted or lowered during this movement, no work was done against gravity.

Therefore, this distance does not affect the amount of work done by the workman.

To learn more about : work

https://brainly.com/question/30121704

#SPJ11

imagne that your friends cat was cloned. would it be the same

Answers

If my friend's cat was cloned, the resulting cat would be genetically identical to the original cat. However, this does not mean that the cloned cat would be exactly the same as the original cat in terms of its behavior, personality, or even appearance.

Environmental factors and experiences can have a significant impact on an animal's development and behavior, so even genetically identical cats can have differences in their behavior and personality. Additionally, the cloning process itself can introduce some genetic and epigenetic changes that may affect the cloned cat's development and behavior. Therefore, while the cloned cat may look and behave similarly to the original cat, it would not be exactly the same.

Learn more about Environmental factors

https://brainly.com/question/29517743

#SPJ4

if a star located 45 light years away from us exploded today, how long would it take before we can see the explosion?

Answers

The light from an explosion 45 light-years distant from us would take 45 years to get to us if it happened today. This is because light travels at a constant speed of about 9.46 trillion kilometers in one year (this is also known as a light-year).

A light-year is a unit of distance used to measure the vast distances between celestial objects in space. It is the distance that light travels in one year, which is approximately 9.46 trillion kilometers or 5.88 trillion miles.

To put it into perspective, if we were to travel at the speed of light (which is impossible according to our current understanding of physics), it would take us one year to travel one light-year. This means that the light we see from the stars in the night sky has taken many years to reach us, and some of the stars we see may not even exist anymore. The concept of a light-year is crucial to our understanding of the universe and helps astronomers measure the distances between celestial objects such as stars, galaxies, and quasars.

To learn more about Light-years visit here:

brainly.com/question/771827

#SPJ4

the loudness of sound, measured in decibels (db), is calculated using the formula , where l is the loudness, and i is the intensity of the sound.what is the intensity of a fire alarm that measures 125db loud? round your answer to the nearest hundredth.intensity

Answers

The intensity of the fire alarm that measures 125 dB loud is approximately 3.16 W/[tex]m^{2}[/tex].


To calculate the intensity (I) of a fire alarm that measures 125 dB loud, we need to use the formula for loudness (L):

L = 10 * log10(I / Io)

In this formula, L is the loudness (in dB), I is the intensity of the sound, and Io is the reference intensity ([tex]10^{-12}[/tex] W/[tex]m^{2}[/tex]). We are given L = 125 dB and we want to find I. First, we need to rearrange the formula to solve for I:

I = Io *[tex]10^{L/10}[/tex]

Now, plug in the given values:

I = 10^-12 *[tex]10^{125/10}[/tex]
I = 10^-12 * [tex]10^{12.5}[/tex]
I ≈ 3.16 W/[tex]m^{2}[/tex]

The intensity of the fire alarm that measures 125 dB loud is approximately 3.16 W/[tex]m^{2}[/tex]

Know more about   intensity   here:

https://brainly.com/question/28145811

#SPJ11

when the distance between two charges is halved, the electrical force between the charges is reduced by 1/4. quadruples. halves. doubles. none of the above choices are correct.

Answers

When the distance between two charges is halved, the electrical force between the charges quadruples. This is due to the inverse square relationship between distance and electrical force, which means that when distance is halved, the force increases by a factor of 4.



The electrical force between the charges quadruples when the distance between them is halved. This is due to Coulomb's Law, which states that the electrical force (F) between two charges (q1 and q2) is directly proportional to the product of the charges and inversely proportional to the square of the distance (r) between them. Mathematically, it can be expressed as:

F = k * (q1 * q2) / r^2

When the distance (r) is halved, the denominator (r^2) becomes 1/4 of its original value, which causes the electrical force (F) to be 4 times greater, or quadruple.

To learn more about quadruples please visit:

https://brainly.com/question/7966538

#SPJ11

. Ima shoved a box horizontally over the end of a cliff. The initial velocity was 10m/s and it took 5.4s to hit
the ground.

+ How tall was the cliff?

+ How far away from the base of the cliff did the box fall?

Answers

Based on the provided initial velocity; The cliff was approximately 143.1 meters tall., The box fell approximately 54 meters away from the base of the cliff.

How to solve the questions on velocity?

To find the height of the cliff, we can use the following kinematic equation for vertical motion:

y = y0 + v0_yt + 0.5a_y*t⁻².

where:

y = final vertical position

y0 = initial vertical position (0, since we start from the top of the cliff)

v0_y = initial vertical velocity (0, since the box is shoved horizontally)

a_y = vertical acceleration (9.81 m/s², due to gravity)

t = time (5.4 seconds)

Plugging in the values, we get:

y = 0 + 05.4 + 0.59.815.4²

y = 0.59.8129.16

y = 4.90529.16

y = 143.1 m

To find how far away the box fell from the base of the cliff, we can use the following equation for horizontal motion:

x = x0 + v0_x*t

where:

x = final horizontal position

x0 = initial horizontal position (0, since we start from the edge of the cliff)

v0_x = initial horizontal velocity (10 m/s)

t = time (5.4 seconds)

Plugging in the values, we get:

x = 0 + 10*5.4

x = 54 m

To know more about  initial velocity visit:-

brainly.com/question/14295901

#SPJ1

the magnetic force per meter on a wire is measured to be only 55% of its maximum possible value. what is the angle between the wire and the magnetic field?

Answers

The angle between the wire and the magnetic field is approximately 33.6 degrees.

To find the angle between the wire and the magnetic field, we will use the following formula for the magnetic force per meter on a wire:

F = BIL sin(θ)

where F is the magnetic force per meter, B is the magnetic field strength, I is the current flowing through the wire, L is the length of the wire, and θ is the angle between the wire and the magnetic field.

Given that the magnetic force is only 55% of its maximum possible value, we can write the equation as:

0.55 * F_max = BIL sin(θ)

The maximum force occurs when sin(θ) = 1, which means:

F_max = BIL

Now, we can substitute F_max back into our first equation:

0.55 * BIL = BIL sin(θ)

Now, divide both sides by BIL:

0.55 = sin(θ)

Finally, to find the angle θ, take the inverse sine (sin^(-1)) of both sides:

θ = sin^(-1)(0.55)

θ ≈ 33.6 degrees

So approximately 33.6 degrees is the angle between the wire and the magnetic field.

More on magnetic field: https://brainly.com/question/15567206

#SPJ11

what focal length of corrective lens should this person use to make the far point distance infinite?

Answers

To determine the focal length of a corrective lens required to make the far point distance infinite, we need to follow these steps:

1) Measure the person's far point distance: This can be done by having the person read letters on an eye chart or by using a refractometer.

Let's assume the person's far point distance is 3 meters.

2) Determine the person's current corrective lens prescription: If the person already wears corrective lenses, their current prescription can be used to calculate the required focal length of the corrective lens.

If they do not wear corrective lenses, this step can be skipped.

3) calculate the person's current refractive error: This can be done by subtracting the measured far point distance from infinity (1/∞) and converting the result to diopters.

For example, if the person's far point distance is 3 meters, their refractive error would be -0.33 diopters (1/3m = 0.33 D).

4) Determine the focal length of the corrective lens required to make the far point distance infinite: This can be done by adding the person's refractive error to the desired focal length of infinity (1/0 = 0 D).

For example, if the person's refractive error is -0.33 diopters, the required focal length of the corrective lens would be 0.33 meters or 33 centimeters.

Therefore, the person would need a corrective lens with a focal length of 33 centimeters to make their far point distance infinite.

To know more about focal length of a corrective lens :

https://brainly.com/question/13885819

#SPJ11

Which of these objects is an insulator?
b. copper coin
d. steel fork
a. gold ring
C. glass rod

Answers

Answer:

C

Explanation:

Glass is one of the objects included in an insular so glass rod will be the final ans.

Answer: C; glass rod.
Explanation: Glass is an insulator, while the others are conductors, meaning that it allows electrons to flow in. Insulators do the opposite, meaning that they block the flow of electrons. Hope that helped!

A book sitting on a desk with the surface area of the cover of .05 m^2. The atmospheric pressure is 100kPa. What is the downward force of the atmosphere on the book?

Answers

Answer:Force=500

Explanation:

Because it say "the downward force of atmosphere" we use ATP

ATP=100kpa

area=0.05m2

F=ATP × area

 100,000pa×0.05m2 =5000N

a proton moving in the plane of the page has a kinetic energy of 6.00 mev. a magnetic field of 1.00 t is directed into the page. the proton enters the magnetic field with its velocity vector at an angle?

Answers

The velocity of a proton when it enters the magnetic field is [tex]1.58 × 10^7 m/s.[/tex]

What is the velocity vector at an angle?

We can use the equation for the magnetic force on a charged particle to solve this problem:

F = qvBsinθ

where F is the magnetic force, q is the charge of the particle, v is its velocity, B is the magnetic field, and θ is the angle between the velocity vector and the magnetic field.

Since the proton has a positive charge, it will experience a force perpendicular to its velocity vector, which will cause it to move in a circular path in the plane of the page.

The centripetal force required to keep the proton in a circular path is provided by the magnetic force, so we can equate the two forces:

[tex]F = mv^2/r[/tex]

where m is the mass of the proton, and r is the radius of the circular path.

Equating these two forces, we get:

[tex]qvBsinθ = mv^2/r[/tex]

Solving for the radius, we get:

[tex]r = mv/qBsinθ[/tex]

Substituting the given values, we get:

[tex]r = (1.67 × 10^-27 kg)(3 × 10^8 m/s)/((1.6 × 10^-19 C)(1.00 T)sinθ) = 3.32 × 10^-3/sinθ meters[/tex]

The kinetic energy of the proton is also given, which can be related to its speed v:

[tex]K = (1/2)mv^2[/tex]

[tex]v = sqrt(2K/m) = sqrt((2)(6.00 × 10^6 eV)(1.6 × 10^-19 J/eV)/(1.67 × 10^-27 kg)) = 1.58 × 10^7 m/s[/tex]

Substituting this value for v, we get:

[tex]r = (1.67 × 10^-27 kg)(1.58 × 10^7 m/s)/((1.6 × 10^-19 C)(1.00 T)sinθ) = 1.05 × 10^-3/sinθ meters[/tex]

Finally, we can solve for sinθ:

[tex]sinθ = r/(1.05 × 10^-3 meters) = (3.32 × 10^-3 meters)/(1.05 × 10^-3 meters) = 3.15[/tex]

However, since sinθ can only range from -1 to 1, this value is not physically meaningful. Therefore, we can conclude that the proton cannot enter the magnetic field at any angle that will result in a circular path.

Learn more about magnetic field

brainly.com/question/14848188

#SPJ11

A man pushes a box across a floor. As he increases the force he applies horizontally to the box
the kinetic friction increases

the kinetic friction may increase or decrease depending on the velocity of the box

the kinetic friction decreases

the kinetic friction remains the same

Answers

A man pushes a box across a floor. As he increases the force he applies horizontally to the box the kinetic friction remains the same.

T or F: If one cuts a current carrying wire, the flow of electricity will spill out into the air

Answers

False because when a current-carrying wire is cut, the circuit is broken and the flow of electricity is interrupted. The electrons in the wire will stop moving, and there will be no flow of electricity in the air.

The current in the wire is carried by electrons, which are negatively charged particles that are tightly bound to the wire. When the wire is cut, the electrons can no longer flow in a continuous path and the current will stop. However, there may be a brief spark or arc if the wire is cut while there is still a high voltage present, as the electrons try to jump across the gap in the wire. But once the voltage dissipates, the current flow will stop completely.

To learn more about electricity please visit:

https://brainly.com/question/12791045

#SPJ11

False. Cutting a wire that carries current won't cause electricity to discharge into the atmosphere. But the circuit will be broken, and no longer will power be flowing.

A wire produces a magnetic field as current runs through it. The electrons are kept flowing by this magnetic field in a certain direction, and when the wire is severed, the circuit is broken and the electrons cease to move. Nevertheless, if the wire is cut in a way that sparks or if the wire is improperly insulated, the energy may arc or leap to conductive material nearby, potentially posing a threat. Care must be used when handling wires that carry current, and proper safety precautions must be taken.

learn more about electricity here:

https://brainly.com/question/15800304  

#SPJ11

if the human body has an average density of 983 kg/m3 , what fraction of a person is submerged when floating gently in fresh water?

Answers

Roughly half of a person's body is submerged when they are floating gently in fresh water.

When an object is floating in water, it displaces an amount of water equal to its weight. If the weight of the displaced water is greater than the weight of the object, the object will float, and if it is less, the object will sink.

The fraction of a person that is submerged while floating in fresh water depends on the ratio of their weight to the weight of the water displaced by their body.

Assuming that the volume of a person is constant, we can calculate the weight of a person as:

Weight = density x volume x gravity

where:

density = 983 [tex]kg/m^3[/tex] (average density of human body)

volume = the volume of a person (assumed to be constant)

gravity = 9.81 [tex]m/s^2[/tex] (acceleration due to gravity)

Let's assume the weight of a person is 70 kg, then their volume would be:

Volume = Weight / (density x gravity)

Volume = 70 / (983 x 9.81)

Volume = 0.00716 [tex]m^3[/tex]

Now, let's consider the weight of the water displaced by the person's body. The weight of the water displaced is equal to the weight of the person, which is 70 kg.

Therefore, the fraction of the person's body that is submerged in water is:

Fraction submerged = Weight of water displaced / Total weight

Fraction submerged = 70 / (70 + weight of water in the submerged part of the body)

Since the person is floating gently in water, we can assume that only a small part of their body is submerged, and we can neglect the weight of water in the submerged part of the body.

Thus, we can approximate the fraction submerged as:

Fraction submerged ≈ Weight of water displaced / Total weight

Fraction submerged ≈ 70 / (70 + 70)

Fraction submerged ≈ 0.5 or 50%

Therefore, roughly half of a person's body is submerged when they are floating gently in fresh water.

Learn more about submerged

https://brainly.com/question/30690757

#SPJ4

what is the distance the masses on the right of the fulcrum need to be to balance with the two masses on the left?

Answers

Distance the masses on the right of the fulcrum need to be to balance with the two masses on the left is (3.5kgm - x kg * d m) / 1kg

In order for a lever to be balanced, the moments on either side of the fulcrum need to be equal. The moment is calculated by multiplying the distance from the fulcrum by the mass of the object. Therefore, to balance the two masses on the left of the fulcrum with the masses on the right, we need to calculate the moment on each side and make them equal.

Let's assume the masses on the left of the fulcrum are 2kg and 3kg, and the masses on the right are x kg and y kg, respectively. If the distance between the fulcrum and the 2kg mass is 1m, and the distance between the fulcrum and the 3kg mass is 0.5m.

we can calculate the moments on each side as follows:

Moment on the left side = 2kg x 1m + 3kg x 0.5m = 2kg + 1.5kg = 3.5kgm

Moment on the right side = x kg * d m + y kg * e m

where d and e are the distances between the fulcrum and the masses on the right.

To make the moments equal, we can set them equal to each other:

3.5kgm = x kg * d m + y kg * e m

If we know the mass of one of the objects on the right, we can solve for the distance needed for the other mass to balance the lever. For example, if we know the mass of the object closest to the fulcrum is 1kg.

we can rearrange the equation to solve for e:

e = (3.5kgm - x kg * d m) / 1kg

Once we know the distance needed for the other mass, we can set up the lever accordingly and it should be balanced.

The Question was Incomplete, Find the full content below :

A balanced lever has two weights on it, the masses on the left of the fulcrum are 2kg and 3kg, and the masses on the right are x kg and y kg. If the distance between the fulcrum and the 2kg mass is 1m, and the distance between the fulcrum and the 3kg mass is 0.5m.what is the distance the masses on the right of the fulcrum need to be to balance with the two masses on the left?

know more about mass of the object here:

https://brainly.com/question/1882842

#SPJ11

PLEASE ANSWER ASAP
1. How many atoms are present in 8.500 mole of chlorine atoms?
2. Determine the mass (g) of 15.50 mole of oxygen.
3. Determine the number of moles of helium in 1.953 x 108 g of helium.
4. Calculate the number of atoms in 147.82 g of sulfur.
5. Determine the molar mass of Co.
6. Determine the formula mass of Ca3(PO4)2.
IT WOULD BE HELPFUL

Answers

The number of atoms in 147.82 g of sulphur is 2.772 x 10²⁴. In 1.953 x 10⁸ g of helium, there are 4.883 × 10⁷ moles of helium. 15.50 moles of oxygen weigh 248 g. Calcium phosphate's formula mass would be 310.18 g/mol.

How many atoms make up 1 gramme?

The quantity of atoms or molecules per gramme of atomic weight is known as Avogadro's number, which is 6.022 × 10²³/mole. One mole of hydrogen comprises 6.022 × 10²³ hydrogen atoms for one gramme of hydrogen with an atomic weight of one gramme.

The Avogadro's number states that 1 mole of any substance contains 6.022 x 10²³ particles. Therefore, 8.500 moles of chlorine atoms would contain:

8.500 moles * 6.022 x 10²³ atoms/mole = 5.1167 x 10²⁴ atoms of chlorine.

The molar mass of oxygen is 16.00 g/mol. Therefore, 15.50 moles of oxygen would have a mass of:

15.50 moles * 16.00 g/mol = 248 g

So the mass of 15.50 mole of oxygen is 248 g.

The molar mass of helium is 4.00 g/mol. Therefore, 1.953 x 10⁸ g of helium would contain:

1.953 x 10⁸ g / 4.00 g/mol = 4.883 x 10⁷ moles of helium.

The molar mass of sulfur is 32.06 g/mol. Therefore, 147.82 g of sulfur would contain:

147.82 g / 32.06 g/mol = 4.6055 moles of sulfur. Therefore, the formula mass of Calcium phosphate would be:

(340.08 g/mol) + (230.97 g/mol) + (8*16.00 g/mol) = 310.18 g/mol.

To know more about formula visit:-

https://brainly.com/question/29792091

#SPJ1

a 1 meter long solenoid with 200 turns carries 2a of current . calculate the magnetic field on axis.

Answers

The magnetic field on the axis of the solenoid is 5.03 × 10⁻⁴ T.

The magnetic field on the axis of a solenoid can be calculated using the formula:

B = μ₀ * n * I

Where B denotes the intensity of the magnetic field, 0 denotes the permeability of empty space, n denotes the number of turns per unit length, and I is the current flowing through the solenoid.

In this case, the solenoid is 1 meter long and has 200 turns, so n = 200 turns / 1 meter = 200 turns/meter. The solenoid is delivering 2A of current.

The value of μ₀ is a constant, equal to 4π × 10⁻⁷ T·m/A

When we enter these values into the formula, we get:

B = μ₀ * n * I

= 4π × 10⁻⁷ T·m/A * 200 turns/m * 2A

= 5.03 × 10⁻⁴ T

Therefore, the magnetic field on the axis of the solenoid is 5.03 × 10⁻⁴ T.

Learn more about  magnetic field

https://brainly.com/question/14848188

#SPJ4

magnetic field on the axis of the solenoid is approximately 0.005 T

Solution -  Hi! To calculate the magnetic field on the axis of a solenoid, you can use the formula:

Magnetic field (B) = μ₀ * n * I . (applicable for ideal long solenoid)

where μ₀ is the permeability of free space (approximately 4π x 10^-7 Tm/A), n is the number of turns per unit length, and I is the current.

In your case, the solenoid is 1 meter long with 200 turns and carries a 2 A current. To find n, divide the number of turns by the length:

n = 200 turns / 1 m = 200 turns/m

Now, plug the values into the formula:

B = (4π x 10^-7 Tm/A) * (200 turns/m) * (2 A)

B ≈ 0.005 T

The magnetic field on the axis of the solenoid is approximately 0.005 T (Tesla).

To learn more about solenoid, click on this

brainly.com/question/22043434

#SPJ11

A particle beam is made up of many protons, each with a kinetic energy of 3. 25times 10-15 J. A proton has a mass of 1. 673 times 10-27 kg and a charge of +1. 602 times 10-19 C. What is the magnitude of a uniform electric field that will stop these protons in a distance of 2 m?

Answers

The magnitude of the uniform electric field required to stop the protons in a distance of 2 m is 1.10 x 10^32 N/C.

To solve this problem, we need to use the equation for the work done by an electric field on a charged particle:

W = qEd

First, we need to calculate the velocity of the protons:

[tex]K = 1/2 mv^2 \\v = sqrt(2K/m)[/tex]

Plugging in the values, we get:

[tex]v = sqrt(2 * 3.25 * 10^{-15} J / 1.673 * 10^{-27} kg)\\v = 5.94 * 10^6 m/s[/tex]

Time it takes for the proton to stop:

[tex]t = d/v \\t = 2 m / 5.94 * 10^6 m/s \\t = 3.37 * 10^-7 s[/tex]

Finally, we can use the time and the acceleration due to the electric field to calculate the electric field strength:

[tex]a = v/t \\a = 5.94 * 10^6 m/s / 3.37 * 10^{-7} s\\a = 1.76 * 10^13 m/s^2[/tex]

[tex]E = a/q \\E = 1.76 * 10^{13} m/s^2 / 1.602 * 10^{-19} C\\E = 1.10 * 10^{32} N/C[/tex]

Therefore, the magnitude of the uniform electric field required to stop the protons in a distance of 2 m is 1.10 x 10^32 N/C.

To know more about electric field strength, here

brainly.com/question/28227168

#SPJ4


HELP PLEASE Light travels to Earth from space as a/an_________wave.

O Mechanical
OSound
O Electromagnetic
O Longitudinal

Answers

Answer:

electromagnetic wave.

Explanation:

You can see light from the moon, distant stars, and galaxies because light is an electromagnetic wave. Electromagnetic waves are waves that can travel through matter or through empty space.

Answer: C) Electromagnetic wave

Explanation: It can't be D) Longitudinal because there is no such thing as a longitudinal wave that has to do with space. It wouldn't be mechanical cuz a mechanical doesn't have anything to do with light, neither sound.

Thus, the answer is C) Electromagnetic

As a planet orbits a star, it makes a big ellipse, but its gravity has a similar effect on the star, causing the star to make a small star. this is called

Answers

As a planet orbits a star, it makes a big ellipse, but its gravity has a similar effect on the star, causing the star to make a small star. This is called the "gravitational wobble" or "stellar wobble".

As a planet orbits a star, it follows an elliptical path due to the gravitational pull of the star. The shape of the planet's orbit is determined by the balance between the gravitational force of the star and the planet's own motion. However, the planet's gravity also affects the star, causing it to move slightly in response to the planet's pull. This motion of the star is much smaller than that of the planet, but it is still measurable and can be observed. This phenomenon is known as the planet's gravitational influence on the star, which causes the star to wobble slightly. This effect is used by astronomers to detect and study exoplanets orbiting distant stars.

To learn more about gravitational wobble, refer:-

https://brainly.com/question/31168966

#SPJ11

The phenomenon that occurs when a planet orbits a star, causing both the planet and the star to make elliptical motions due to their mutual gravitational effects.

This phenomenon is known as the "wobble" or "stellar wobble" and is caused by the gravitational interaction between a planet and its star. As a planet orbits a star, it exerts a gravitational force on the star, causing it to move slightly in response. This movement results in a small, periodic shift in the star's spectral lines, which can be detected by astronomers.

By analyzing this shift, astronomers can determine the presence, size, and orbital characteristics of planets around other stars. At the same time, the planet's gravity also affects the star, causing the star to make a smaller elliptical motion in response. This mutual gravitational interaction results in the observed stellar wobble.

To know more about stellar wobble:

https://brainly.com/question/29542172

#SPJ11

1. which angular velocity was non-zero and what was the sign? explain how this makes sense given the right-hand rule for the angular velocity.

Answers

Clockwise angular velocity was  non-zero and had a positive sign. So, the correct answer is D.

The right-hand rule for angular velocity asserts that if the right hand's thumb is pointing in the direction of the axis of rotation, then the direction of the angular velocity vector is given by the direction in which the right hand's fingers curl.

This makes sense in this situation. As a result, the angular velocity vector will point in the same direction as the rotation's axis, and it will be positive when the angular velocity is positive.

In physics, engineering, and other sciences, the right-hand rule for angular velocity is a helpful tool for visualising the direction of the angular velocity vector.

This rule allows us to quickly ascertain the direction and sign of the angular velocity in any given situation.

Complete Question:

Which angular velocity was non-zero and what was the sign? Explain how this makes sense given the right-hand rule for the angular velocity.

A.  Counterclockwise, Positive

B.  Clockwise, Negative

C. Counterclockwise, Negative

D. Clockwise, Positive

To learn more about velocity visit:

https://brainly.com/question/80295

#SPJ4

sunlight shining through a thin, cool gas produces a(n) continuous spectrum. emission line spectrum. absorption line spectrum.

Answers

Sunlight shining through a thin, cool gas produces an absorption line spectrum.

Which spectrum does sunlight shining through a thin, cool gas produces?

When white light passes through a thin, cool gas, some of the light is absorbed by the gas atoms, causing dark lines to appear in the spectrum known as an absorption spectrum. These dark lines represent the wavelengths of light that were absorbed by the gas. This type of spectrum is known as an absorption line spectrum. In the case of sunlight passing through Earth's atmosphere, the gases in the atmosphere absorb specific wavelengths of light, creating a series of dark lines in the spectrum. These dark lines are called Fraunhofer lines and are used to identify the chemical composition of the Sun and other stars.

Learn more about absorption line spectrum

brainly.com/question/31040837

#SPJ11

how are the masses of supermassive black holes related to the masses of the bulges of their surrounding galaxies and what does this suggest about the role of supermassive black holes in galaxy evolution.

Answers

Supermassive black holes are closely related to galactic evolution through their tightly correlated masses with galactic bulges.

How do supermassive black holes and galactic bulges relate, and what does this mean for galaxy evolution?

Observations have shown that there is a tight correlation between the mass of the supermassive black hole (SMBH) at the center of a galaxy and the mass of the galactic bulge. This correlation, known as the M-sigma relation, suggests that the formation and evolution of SMBHs and galactic bulges are closely linked.

The M-sigma relation suggests that the growth of the SMBH and the galactic bulge are linked through a process known as "feedback." Feedback occurs when energy or matter is expelled from the central region of the galaxy by the SMBH, which then interacts with the gas and dust in the surrounding region, either preventing or enhancing the formation of new stars. This process helps regulate the growth of both the SMBH and the galactic bulge and also influences the overall evolution of the galaxy.

Furthermore, studies have also shown that the M-sigma relation holds not only for nearby galaxies but also for distant, high-redshift galaxies, suggesting that the correlation between SMBHs and galactic bulges has been in place for most of cosmic history. This highlights the important role that SMBHs play in shaping the evolution of galaxies over time.

Overall, the M-sigma relation and other related observations provide strong evidence for a symbiotic relationship between SMBHs and galactic bulges and suggest that these massive black holes play a crucial role in the formation, evolution, and regulation of their host galaxies.

Learn more about black holes

brainly.com/question/10597324

#SPJ11

if a sound wave transitions from one medium to another, which transition would result in a shortening of the wavelength of the sound wave?

Answers

If a sound wave transitions from one medium to another, a transition from a medium with a higher speed of sound to a medium with a lower speed of sound would result in a shortening of the wavelength of the sound wave.


1. When a sound wave enters a new medium, its frequency remains constant.
2. The speed of sound depends on the properties of the medium (e.g., density, elasticity).
3. The wavelength of the sound wave can be calculated using the formula: wavelength = speed of sound / frequency.
4. When the speed of sound is higher in the first medium and lower in the second medium, the wavelength will decrease according to the formula since the frequency is constant.

So, a transition from a medium with a higher speed of sound to a medium with a lower speed of sound would cause the wavelength of the sound wave to shorten.

To know more about properties of the medium:

https://brainly.com/question/23088538

#SPJ11

A sound wave transitioning from a medium with a higher speed of sound to a medium with a lower speed of sound will result in a shortening of the wavelength.

When a sound wave transitions from a medium with a higher speed of sound to a medium with a lower speed of sound, the wavelength of the sound wave will shorten.
Step-by-step explanation:
1. A sound wave is an oscillation of pressure that propagates through a medium.
2. The transition occurs when the sound wave moves from one medium to another.
3. The speed of sound in each medium depends on the medium's properties (density, elasticity, etc.).
4. If the sound wave moves from a medium with a higher speed of sound to a medium with a lower speed of sound, the wavelength will shorten.
5. This shortening occurs because the wave's frequency remains constant, and since the speed of sound has decreased, the wavelength must also decrease to maintain the relationship: speed = wavelength × frequency.

To learn more about the sound wave, refer:-

https://brainly.com/question/11797560

#SPJ11

what is the wavelength of a radio photon from an am radio station that broadcasts at 1270 kilohertz? express your answer to three significant figures and include the appropriate units.

Answers

The wavelength of a radio photon from an AM radio station broadcasting at 1270 kilohertz is 236 meters.

To find the wavelength of a radio photon from an AM radio station broadcasting at 1270 kilohertz, we can use the formula:
wavelength (λ) = speed of light (c) / frequency (f)

1. First, we need to convert the frequency from kilohertz to hertz:
1270 kilohertz = 1270 * 10³ hertz = 1,270,000 hertz

2. Next, we will use the speed of light, which is approximately 3.00 * 10⁸ meters per second (m/s).

3. Now, we can plug in the values into the formula:
wavelength (λ) = (3.00 * 10⁸ m/s) / (1,270,000 Hz)

4. Calculate the wavelength:
λ ≈ 236.22 meters

5. Finally, express the answer to three significant figures and include the appropriate units:
λ ≈ 236 meters

Learn more about wavelength:

https://brainly.com/question/10750459

#SPJ11

when a high voltage is applied to a low-pressure gas, causing it to glow, it will emit what type of spectrum? a. li

Answers

When a high voltage is applied to a low-pressure gas and it starts to glow, it will emit an emission line spectrum.

This spectrum consists of bright, narrow lines at specific wavelengths, which are characteristic of the element or molecules in the gas. This is due to the electrons in the gas being excited to higher energy levels and then falling back down to lower energy levels, emitting photons of light at specific wavelengths corresponding to the energy differences between the levels. The resulting emission spectrum can be used to identify the elements or molecules present in the gas.

Learn more about spectrum

https://brainly.com/question/6836691

#SPJ4

A car with a mass of 1000 kg is traveling east at 4 m/s. Another car with a mass of 500 kg is traveling west at a speed of 3 m/s. The two cars collide. After the collision, the 1000 kg car has a velocity of 1 m/s east. What is the velocity of the 500 kg car after the collision?

Answers

Answer: the velocity of the 500 kg car after the collision is 3 m/s to the east.

Explanation:

Initial momentum = (mass of car 1 x velocity of car 1) + (mass of car 2 x velocity of car 2)

Initial momentum = (1000 kg x 4 m/s) + (500 kg x -3 m/s)   (Note that we use a negative velocity for car 2 because it is traveling in the opposite direction)

Initial momentum = 4000 kg m/s - 1500 kg m/s = 2500 kg m/s

After the collision, the total mass and total momentum of the system remain the same.

Final momentum = (mass of car 1 x velocity of car 1) + (mass of car 2 x velocity of car 2)

Final momentum = (1000 kg x 1 m/s) + (500 kg x v)  (where v is the velocity of the 500 kg car after the collision)

Final momentum = 1000 kg m/s + 500v

Since the total momentum is conserved, we can set the initial momentum equal to the final momentum:

Initial momentum = Final momentum

2500 kg m/s = 1000 kg m/s + 500v

Solving for v, we get:

v = (2500 kg m/s - 1000 kg m/s) / 500 kg

v = 3 m/s

??

a motorcycle passing by your apartment emits a sound with an intensity level of 70 db. if two identical motorcycles passed by together, what would be the intensity level of the resulting sound?

Answers

The intensity level of the resulting sound is approximately 73 dB, the correct option is (e)

To calculate the intensity level of the resulting sound, we use the formula:

L = 10 log(I ÷ I0)

where L is the intensity level in decibels, I is the intensity of the sound wave in watts per square meter, and I0 is the reference intensity, which is equal to 1 x 10⁻¹² watts per square meter.

Since the motorcycles emit identical sound waves, the intensity of each wave is the same. We can calculate the intensity of a single motorcycle's sound wave using the formula:

I = [tex](10^{L/10} )[/tex] x I0

where L is the intensity level of the sound wave in decibels. Substituting L = 70 dB and I0 = 1 x 10⁻¹² watts per square meter, we get:

I = (10⁷) x 1 x 10⁻¹²

= 1 x 10⁻⁵ watts per square meter

To calculate the intensity level of the resulting sound, we use the formula:

L = 10 log(2I ÷ I0)

where 2I is the intensity of the sound waves produced by two identical motorcycles. Substituting I = 1 x 10⁻⁵ watts per square meter and I0 = 1 x 10⁻¹² watts per square meter, we get:

2I = 2 x 1 x 10⁻⁵

= 2 x 10⁻⁵ watts per square meter

L = 10 log(2 x 10⁻⁵ ÷ 1 x 10⁻¹²)

= 10 log(2 x 10⁷)

= 10 (7.301)

= 73.01 dB

Therefore, the correct option is (e)

To learn more about intensity follow the link:

https://brainly.com/question/17583145

#SPJ4

The complete question is:

A motorcycle passing by your apartment emits a sound with an intensity level of 70 dB. If two identical motorcycles passed by together, what would be the intensity level of the resulting sound?

a. 80 dB

b. 140 dB

c. 103 dB

d. 70 dB

e. 73 dB

Other Questions
alyssa is saving money for a vacation she wants to take five years from now. if the trip will cost $1,000 and she puts her money into a savings account paying 4 percent interest, compounded annually, how much would alyssa need to deposit today to reach her goal without making further deposits? A patient is receiving a NS fluid bolus for hypovolemic concerns. The nurse hung 1L NS at 6am. The providers order is: NS 1L IV over 4 hours. The nurse from the next shift arrives at 07:30am to find 600 mL remaining in the bag. The provider then updates the order to infuse the remaining NS over 3 hours. What rate did the previous nurse have the pump set to based on the findings at 07:30am? (mL/hr)? (1 Point) 200 250 266 300 Consider a hypothetical security that pays a continuous dividend over time according to D(t) = Do(1+t). Assuming a (constant) CC rate of interest, r, write a SIMPLIFIED expression for the present value and the duration of this security.If r = 10% what maturity ZC bond matches the duration? Select all that apply. Today, many languages have the following in common:They came from nomadic pastoral people. Old languages developed and evolved into new languages. They have many cognates in commonOne-third of the world's language come from a single language family,They developed in tidal waves. NEXT QUESTION ASK FOR HELP You can afford a $1000 per month mortgage payment. You've found a 30 year loan at 5.3% interest.a) How big of a loan can you afford? (Round to the nearest cent, as needed.)$b) How much total money will you pay the loan company? (Round to the nearest cent, as needed.)$c) How much of that money is interest? (Round to the nearest cent, as needed.) a mother who just given birth has difficulty sleeping despite her exhaustion from labor. what are the causes of this inability to rest? select all that apply. true or false? advertising agency employees can create seller central accounts on behalf of their clients. Write a story that explains two heads are better than one Which of the following was true about Great Britain and France before World War II?A. Both countries were run by dictators in the years leading up to the warB. Both countries were communist governments leading up to the warC. Both countries were democracies leading up to the warD. Both countries were monarchies leading up to the war if most countries in europe experience a recession, how might the european central bank use direct intervention to stimulate economic growth?the ecb couldeuros in the foreign exchange market, which may cause the euro to against other currencies, and therefore cause in the demand for european imports. Which word best describes the typical quality of the supplies that the army gave thebuffalo soldiers? high poor equal superior kya is editing the customizable section of her product detail page to include charts, video, and narrative comments. what is this section referred to as? which medication would be administered after extracorporeal shock wave lithotripsy for treatment of cholelithiasis to dissolve remaining stone fragments Zain's current credit card balance is $9,160.00 with a minimum payment of $325.00. Over the next month he spends $1,098.00. If the APR is 18.99% (billed monthly), what will the new balance be, including interest? what ultimatum does polonius deliver to ophelia (lines 132-137)? based on what ophelia has previously said about hamlet, what emotions might her statement in line 137 conceal? Add. Express your answer in simplest form. 2/5 + 5/6A. 1/3B. 7/11C. 7/30D. 1 7/30 What was Gandhi's focus after India's independence? Question 14 options: a. Keeping Britain out of India b. Building the economic prosperity of India c. Building peace and unity between Muslims and Hindus d. Keeping India cultures and traditions alive which segment represents output levels for which there is a clear negative relationship between unemployment and inflation? Please help me solve and show my work I need help with this please