NaOH is a strong base and completely dissociates in water. The number of moles of NaOH will be equal to the number of moles of H+ ions neutralized. Hence, 99 ml of NaOH must be added.
It measures the acidity or basicity of a solution on a scale of 0 to 14. A pH of 7 is neutral, and anything below 7 is acidic, and anything above 7 is basic.
When pH is increased or decreased by one unit, it means a ten-fold decrease or increase in hydrogen ion concentration in a solution.Acid and base are two essential terms to learn here.
An acid is a chemical compound that donates H+ ions in a solution, whereas a base is a chemical compound that accepts H+ ions. These H+ ions determine the acidity of the solution.
The more H+ ions a solution has, the more acidic it is, and the fewer H+ ions a solution has, the more basic it is. A pH of 2 indicates that the solution is highly acidic.
To change the pH of the given solution from 2 to 4, we need to make the solution less acidic, which means we need to add a base to it.
Let the volume of the base we need to add be x ml.The pH of the new solution will be 4. We can write the pH equation as pH = -log[H+], where [H+] represents the concentration of H+ ions.
The concentration of H+ ions in the initial solution is:2 = -log[H+]. Hence, [H+] = 0.01 M.The concentration of H+ ions in the final solution is:4 = -log[H+].
Hence, [H+] = 0.0001 M.We know that[H+] = Acid concentration = Base concentration.Hence, the concentration of NaOH added to the solution will be 0.01 M - 0.0001 M = 0.0099 M.
NaOH is a strong base and completely dissociates in water. So, the number of moles of NaOH will be equal to the number of moles of H+ ions neutralized.
The volume of NaOH needed to achieve this concentration:0.0099 mol/L = n NaOH / V NaOHn NaOH = 0.0099 mol/L x (10 mL + x) = 0.099 molV NaOH = n NaOH / 0.1 mol/L = (0.0099 mol) / (0.1 mol/L) = 0.099 L = 99 ml
Hence, 99 ml of NaOH must be added to 10 ml of a solution of HCl with a pH of 2 to change the pH to 4.
to know more about neutralized refer here:
https://brainly.com/question/27891712#
#SPJ11
Order the anionic compounds from the most basic to least basic? 3) 1) 2) Magnify Select One Strongest base Second strongest Match With B 3) Weakest base C 2)
The compounds containing anions from the most basic to least basic are:1) B (Strongest base)2) C3) A (Weakest base)The order of basicity of anionic compounds can be determined using the periodic table. The correct answer is B>C>A.
Anions are larger than their corresponding atoms due to the addition of one or more electrons. As a result, anions have lower effective nuclear charges and therefore are more basic than their parent atoms. The larger the anion, the more basic it is. The order of basicity of anionic compounds is as follows:
B > C > A
Where, B is the most basic anionic compound, C is the second most basic anionic compound, A is the least basic anionic compound
Therefore, the order of the anionic compounds from the most basic to least basic is B > C > A. To order the anionic compounds from the most basic to least basic, follow these steps: Identify the anions present in each compound., Determine the conjugate acid of each anion, Compare the strength of the conjugate acids, Order the anionic compounds based on the strength of their conjugate acids (the weaker the conjugate acid, the stronger the base).
To know more about anions, refer here:
https://brainly.com/question/30581995#
#SPJ11
the unit cell in a certain lattice consists of a cube formed by an anion, a, at each corner, an anion in the center, and a cation,x, at the center of each face. how many anions and cations are there in the unit cell?
Answer: There are 8 anions and 6 cations in the unit cell.
There are 8 anions and 6 cations in the unit cell. The unit cell consists of a cube, with an anion, 'a', at each corner, an anion in the center, and a cation, 'x', at the center of each face.
The cube is made up of 8 cubes, each of which is made up of one anion at each corner, and one cation at the center. Therefore, there are 8 anions in the unit cell, one at each corner. In addition, there is an anion in the center of the unit cell.
The 6 cations are located in the center of each of the faces of the cube. The cations are located in the middle of each face and therefore, there are 6 cations in the unit cell.
In total, there are 8 anions and 6 cations in the unit cell.
Learn more anions and cations here:
https://brainly.com/question/20781422#
#SPJ11
what is the ph of an aqueous solution that is made by mixing 200 ml of 0.20m nah2po4 and 200 ml of 0.60m na2hpo4 at 25oc?
Answer: The pH of the solution is 9.22.
Explanation:
The given solution is a mixture of 200 mL of 0.20 M NaH2PO4 and 200 mL of 0.60 M Na2HPO4. NaH2PO4 is a weak acid and Na2HPO4 is a weak base. When they are mixed, they undergo a buffer solution.
The Henderson-Hasselbalch equation for a buffer is:
pH = pKa + log ([A-]/[HA])
Where,
pKa = -log Ka (dissociation constant of the acid)
[HA] = concentration of the acid (NaH2PO4)
[A-] = concentration of the conjugate base (HPO42-)
The pKa value for NaH2PO4 is 7.21 (at 25°C). The concentrations of the acid and the conjugate base can be calculated as follows:
For NaH2PO4:
moles of NaH2PO4 = 0.20 M x 0.2 L = 0.04 mol
concentration of NaH2PO4 = 0.04 mol / 0.4 L = 0.10 M
For Na2HPO4:
moles of Na2HPO4 = 0.60 M x 0.2 L = 0.12 mol
concentration of Na2HPO4 = 0.12 mol / 0.4 L = 0.30 M
Using the Henderson-Hasselbalch equation and substituting the values:
pH = 7.21 + log ([HPO42-]/[H2PO4-])
pH = 7.21 + log (0.30/0.10)
pH = 9.22
Therefore, the pH of the solution is 9.22.
10cm³ of co was mixed with 15cm³ of oxygen and exploded. After cooling to the original temperature, the volume was 20cm³; after shaking with acqueous sodiumhydroxide the volume was reduced to 10cm³. Show that this figures agree with Gay Lussac's law
In this reaction, 10 cm³ of CO is mixed with 15 cm³ of oxygen. After the reaction, the volume of the product is 20 cm³. When shaken with aqueous sodium hydroxide, the volume is reduced to 10 cm³. This agrees with Gay Lussac's Law.
According to Gay Lussac's Law, the ratio of the volumes of the reactants and products of a reaction are constant when pressure and temperature are held constant. In this reaction, 10 cm³ of CO is mixed with 15 cm³ of oxygen. After the reaction, the volume of the product is 20 cm³. When shaken with aqueous sodium hydroxide, the volume is reduced to 10 cm³. This agrees with Gay Lussac's Law since the ratio of the initial reactant volumes (10 cm³ to 15 cm³) is the same as the ratio of the final product volumes (20 cm³ to 10 cm³).
For more such questions on Gay Lussac's Law, click on:
https://brainly.com/question/2683502
#SPJ11
100cm3 of a gas at 27degree Celsius exert a pressure of its volume is increased to 200cm3 at 127 degrees Celsius
Answer: 100cm3 of gas at 27°c exert a pressure of 750mmHg. Calculate its pressure if it's volume is increased to 250cm3 at 127°c? In Chemistry
Explanation:
Given this equation (linked in screenshot), which of the following is true if 4.53 moles of C6H14 completely reacts with excess oxygen?
A) 0.755 moles CO2 and 0.162 moles H2O will be formed.
B) 27.1 moles CO2 and 31.7 moles H2O will be formed.
C) 12 moles CO2 and 14 moles H2O will be formed.
D) 54.4 moles CO2 and 63.4 moles H2O will be formed.
The correct answer is option D: 54.4 moles CO₂ and 63.4 moles H₂O will be formed when 4.53 moles of C₆H₁₄ completely reacts with excess oxygen.
What is a chemical reaction?
A chemical reaction is a process that leads to the transformation of one chemical substance to another chemical. It involves breaking and forming of chemical bonds between atoms to create new molecules or compounds.
According to the balanced equation given, 2 moles of C₆H₁₄ react with 19 moles of O₂ to produce 12 moles of CO₂ and 14 moles of H₂O.
Therefore, for 4.53 moles of C₆H₁₄ , the amount of O₂ required for complete reaction would be:
(19/2) x 4.53 = 42.9 moles of O₂
Since excess oxygen is present, all the C₆H₁₄ will react, and the number of moles of CO₂ and H₂O produced will be:
CO₂ = 12 x (4.53/2) = 27.2 moles
H₂O = 14 x (4.53/2) = 31.7 moles
Therefore, the answer is D) 54.4 moles CO₂ and 63.4 moles H₂O will be formed.
To find out more about chemical reactions, visit:
https://brainly.com/question/29762834
#SPJ1
the density of normal water (tghe hydrogens do not have neurons) at 20c is 0.9982 g/ml. calculate the density you would expect for heavy water by assuming the deuterium is the same size as normal hydrogen when it is poart of the water
The density of heavy water at 20°C is 1.107 g/mL.
At 20°C, the density of normal water is 0.9982 g/ml.
The density of heavy water, which is composed of two atoms of deuterium instead of hydrogen, we must consider the difference in size between hydrogen and deuterium atoms.
Although the atomic masses of hydrogen and deuterium are slightly different, the difference in size is more significant, with deuterium atoms being about twice the size of hydrogen atoms.
Thus, when deuterium atoms are part of the water, the overall density of the water is greater.
This can be quantified using the following equation:
Density (heavy water) = [2*mass of hydrogen + mass of deuterium] / [2*volume of hydrogen + volume of deuterium]
The density of heavy water at 20°C is 1.107 g/ml, which is about 11% higher than that of normal water.
This increase in density is due to the larger size of deuterium atoms when compared to hydrogen atoms.
In conclusion, the density of heavy water at 20°C can be calculated by accounting for the difference in size between hydrogen and deuterium atoms.
This yields a value of 1.107 g/ml, which is 11% higher than that of normal water.
to know more about density refer here:
https://brainly.com/question/29775886#
#SPJ11
prior knowledge questions (do these before using the gizmo.) what important gas do we take in when we breathe?
Answer: The important gas that we inhale when we breathe is oxygen (O2).
It is necessary for the process of respiration. Respiration is a vital process that takes place in all living cells, including human cells. In this process, glucose (sugar) and oxygen are converted into energy (ATP), carbon dioxide (CO2), and water (H2O).
During the process of inhalation, the air enters the body through the mouth and nose. Afterward, it moves down the trachea and then into the lungs. Once inside the lungs, oxygen molecules pass through the thin walls of the capillaries and into the bloodstream, where it is transported to the rest of the body. Oxygen is essential for the proper functioning of the body.
It is used by the cells to produce energy, which is used to power various biological processes. Without oxygen, our cells would not be able to function, and we would die.
Learn more about oxygen here:
https://brainly.com/question/13905823#
#SPJ11
write the equilibrium equation established in a saturated potassium chloride, kcl, solution. equilibrium reaction:
The equilibrium equation for the dissolution of potassium chloride (KCl) in water can be represented as:
KCl(s) ⇌ K+(aq) + Cl-(aq)
What is Equilibrium?
In chemistry, equilibrium refers to the state of a chemical reaction where the concentrations of reactants and products no longer change with time. At this stage, the forward and reverse reactions occur at the same rate, resulting in no net change in the concentrations of reactants and products. It is denoted by a double arrow (⇌) between the reactants and products in a chemical equation. The equilibrium point is reached when the rate of the forward reaction equals the rate of the reverse reaction. The equilibrium constant, Keq, is a quantitative measure of the equilibrium concentration of reactants and products.
In this equation, KCl is the solid salt, and the arrow indicates the reversible reaction between the solid and its constituent ions in the aqueous solution. The dissociation of KCl in water results in the formation of potassium ions (K+) and chloride ions (Cl-) in the solution. When the rate of the forward reaction is equal to the rate of the reverse reaction, the solution is said to be in a state of dynamic equilibrium. In a saturated solution of KCl, the concentration of the dissolved ions is at its maximum value at equilibrium, and the undissolved solid salt is in equilibrium with its dissolved ions.
Learn more about Equilibrium from given link
https://brainly.com/question/517289
#SPJ1
what explains the key difference between a bomb calorimeter and a coffee cup calorimeter?
Answer:
The operation of a bomb calorimeter is similar to that of a coffee cup calorimeter, but there is one significant distinction: With a bomb calorimeter, the reaction occurs in a sealed metal container that is submerged in water in an insulated container.
Explanation:
Hope this helps!
Compared to the velocity of an earthquake’s S-wave, the velocity of the P-wave in the same material is
Answer:
usually faster. The P-wave is a compressional wave, meaning it is a wave of compression and expansion that travels through the material. It is also known as a primary wave, and it is the fastest type of seismic wave. The S-wave, or secondary wave, is a shear wave, which is a wave that causes the material to oscillate perpendicular to the direction of the wave. The S-wave is usually slower than the P-wave.
find the pka of an acid which has an initial concentration of 1.497 m for the acid and an equilibrium ph of 2.546.
Answer:
From the equilibrium pH, we can find the concentration of H+ ions in solution using the relation:
[H+] = 10^(-pH)
[H+] = 10^(-2.546) = 2.177 × 10^(-3) M
Now we can use the fact that the acid is a weak acid and only partially dissociates to form H+ ions and its conjugate base. Therefore, we can assume that [HA] at equilibrium is equal to the initial concentration of the acid minus the concentration of H+ ions that were produced from the dissociation of the acid.
[HA] at equilibrium = initial concentration of acid - [H+]
[HA] at equilibrium = 1.497 M - 2.177 × 10^(-3) M
[HA] at equilibrium = 1.497 M (since the concentration of H+ ions is negligible compared to the initial concentration of the acid)
Now we can plug in the values we obtained into the Henderson-Hasselbalch equation:
2.546 = pKa + log([A-]/[HA])
2.546 = pKa + log(0/[HA])
2.546 = pKa - log([HA])
log([HA]) = pKa - 2.546
[HA] = 10^(pKa - 2.546)
Since we assumed that the concentration of the conjugate base at equilibrium is negligible, we can assume that [A-] ≈ 0.
Therefore, we have:
pKa = log([HA]/0) + 2.546
pKa = log([HA]) + 2.546
pKa = log(1.497) + 2.546
pKa = 0.174 + 2.546
pKa = 2.72
Therefore, the pKa of the acid is approximately 2.72.
a 78.0 ml 78.0 ml portion of a 1.70 m 1.70 m solution is diluted to a total volume of 218 ml. 218 ml. a 109 ml 109 ml portion of that solution is diluted by adding 115 ml 115 ml of water. what is the final concentration? assume the volumes are additive.
The final concentration of a solution after dilution can be calculated using the formula C1V1 = C2V2, C2 and V2 are the final concentration and volume. The final concentration of the solution after the second dilution is 0.309 M.
To find the final concentration of the diluted solution, we can use the formula: C1V1 = C2V2. Where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration, and V2 is the final volume. First, we dilute a 78.0 ml portion of a 1.70 M solution to a total volume of 218 ml. Using the formula, we can find the final concentration: [tex](1.70 M)(78.0 ml) = C2(218 ml)[/tex]
[tex]C2 = (1.70 M)(78.0 ml) / (218 ml)[/tex]
[tex]C2 = 0.610 M[/tex]
[tex]C1V1 = C2V2[/tex]
[tex](0.610 M)(109 ml) = C2(109 ml + 115 ml)[/tex]
[tex]C2 = (0.610 M)(109 ml) / (109 ml + 115 ml)\\\C2 = 0.309 M[/tex]
Therefore, the final concentration of the solution after the second dilution is 0.309 M.
To know more about initial concentration, here
brainly.com/question/30609774
#SPJ4
during chemical weathering, sodium is released as dissolved ions and transported to the ocean, where:
Answer: During chemical weathering, sodium is released as dissolved ions and transported to the ocean, where it increases the salinity of the seawater.
Salinity is a measure of the amount of salt in seawater. The greater the salinity, the more salt there is in the water. The salinity of seawater is expressed in parts per thousand (ppt). There are about 35 ppt of salt in seawater.
Chemical weathering is the breakdown of rocks by chemical reactions, resulting in the formation of new minerals. Water is the most common medium for chemical weathering because it can dissolve many minerals. Carbon dioxide, oxygen, and organic acids are also involved in chemical weathering.
Sodium is a common element in minerals that are subject to chemical weathering. When rocks weather, sodium ions are released into the water. Rivers and streams transport these dissolved ions to the ocean, where they accumulate over time.
This is why seawater has a high concentration of sodium ions. Sodium is also introduced into seawater through underwater volcanoes and hydrothermal vents.
Sodium is important for many organisms that live in the ocean. It is an essential nutrient for marine animals, and it plays a role in regulating the body fluids of fish and other aquatic animals. Sodium is also important for maintaining the pH of seawater.
The concentration of sodium in seawater can also have an impact on ocean currents and the movement of water around the world.
Learn more about sodium here:
https://brainly.com/question/29327783#
#SPJ11
What is the nature of the bond indicated?
A. Nonpolar Covalent
B. Polar Covalent
C. Ionic
D. Metallic
The nature of the bond indicated in the diagram above would be the nonpolar covalent bond. That is option A.
What is a Nonpolar Covalent bond?A Nonpolar Covalent bond is defined as the type of chemical bond that is formed when electrons are shared equally between two atoms.
While polar covalent bond is defined as the type of chemical bond that is formed when electrons are shared unequally between two atoms.
For example, molecular oxygen (O2) is nonpolar because the electrons will be equally distributed between the two oxygen atoms.
Therefore the type of bond that is indicated in the diagram above is a nonpolar covalent bond.
Learn more about covalent bond here:
https://brainly.com/question/29630777
#SPJ1
i. if you conducted this coupling step under acidic conditions, how would you expect the reaction rate to be affected?
If you conducted this coupling step under acidic conditions, you expect the reaction rate to be affected because at low pH values, the carboxylic acid is transformed into a more electrophilic species, which is easily attacked by the nucleophile, and the yield of the amide bond would be high.
In organic synthesis, coupling reactions are common, and they include the combination of a nucleophile with an electrophile to form a covalent bond. The coupling reaction between a carboxylic acid and an amine is a straightforward way to synthesize an amide in the presence of an activating agent (a molecule that can increase the electrophilicity of the carboxylic acid).
It is worth noting that there are various methods for synthesizing amides, including chemical and enzymatic methods. Coupling reactions are the most frequent chemical methods used for the synthesis of amides.
Learn more about nucleophile at:
https://brainly.com/question/6357352
#SPJ11
1. Water is considered to be the universal it most often exists in nature as a(n)
Water is the universal solvent due to its ability to dissolve a wide range of solutes. It most often exists in nature as a liquid, but can also exist as a solid (ice) or gas (water vapor).
What is water considered the universal?Water is called a 'universal solvent' because water can dissolve much more substances than any other liquid found in nature but water cannot dissolve every substance. For instance, because oppositely charged particles are not very soluble in water, hydroxides, fats, or waxes cannot be dissolved by it.
Why is water considered as an important solvent?Water is regarded as a significant solvent since it has a wide range of necessary for life compounds that it may dissolve. Moreover, waste materials disintegrate in water before they can.
To know more about solvent visit:-
https://brainly.com/question/30452436
#SPJ1
citric acid contains 37.51% c, 4.20% h, and 58.29% o by mass. what is the empirical formula of this compound?
The empirical formula of the given compound can be determined as follows the CHOS or C3H4O3.
According to the given data, the compound citric acid contains 37.51% C, 4.20% H, and 58.29% O by mass. So, let's assume that we have 100 g of citric acid, and then, we can find the masses of each element present in it: Mass of carbon = 37.51 gMass of hydrogen = 4.20 g. Mass of oxygen = 58.29 g.
Next, we need to convert the masses into the number of moles using the molar masses of the elements. The molar mass of carbon = 12.01 g/mol, Number of moles of carbon = 37.51 g / 12.01 g/mol = 3.124 molMolar mass of hydrogen = 1.01 g/molNumber of moles of hydrogen = 4.20 g / 1.01 g/mol = 4.158 molMolar mass of oxygen = 16.00 g/molNumber of moles of oxygen = 58.29 g / 16.00 g/mol = 3.643 follow, we need to find the simplest whole-number ratio of these moles by dividing them by the smallest number of moles, which is 3.124 mol: Carbon = 3.124 mol / 3.124 mol = 1Hydrogen = 4.158 mol / 3.124 mol = 1.33 ≈ 1Oxygen = 3.643 mol / 3.124 mol = 1.17 ≈ 1So, the empirical formula of citric acid is CHOS or C3H4O3.
Read more about carbon:
https://brainly.com/question/19083306
#SPJ11
it is fine to enter an area where there is a chemical spill as long as you are very careful. true or false?
The statement "it is fine to enter an area where there is a chemical spill as long as you are very careful" is False. because A chemical spill refers to the uncontrolled release of one or more hazardous substances.
A chemical spill refers to the uncontrolled release of one or more hazardous substances, which can include liquids, gases, or solids, which might pose a significant threat to the environment and human health. The person responsible for a chemical spill is responsible for managing, containing, and cleaning up the hazardous material to prevent environmental or public health damage.
Following a chemical spill, there is a protocol to be followed to guarantee that no harmful substances have been released into the environment that may cause harm to the public. The presence of toxic chemicals in a confined area poses a significant threat to human health, making it hazardous to enter that location. Even if the spill is small, entering an area where a chemical spill has occurred is hazardous. The contamination may disperse through the air, and you may inhale it or the substance may adhere to your clothing and skin, putting you at risk. You should not go near a chemical spill if you are not wearing appropriate protective gear. This is because it is not advisable to enter an area where there is a chemical spill.
For more such questions on chemical spill , Visit:
https://brainly.com/question/30256645
#SPJ11
What do you think it means for a bond to have “more ionic” or “more covalent” character? Explain your thinking.
In summary, a bond having "more ionic" or "more covalent" character refers to the degree to which the bond is either purely ionic or purely covalent, with most bonds falling somewhere in between.
What does it mean to be more ionic or covalent?When a bond has more ionic character, it means that the electrons are transferred more completely from one atom to another, resulting in larger differences in electronegativity and a greater degree of charge separation between the atoms. This typically occurs when there is a large difference in electronegativity between the atoms involved in the bond.
On the other hand, when a bond has more covalent character, it means that the electrons are shared more equally between the atoms, resulting in a smaller difference in electronegativity and less charge separation. This typically occurs when the atoms involved in the bond have similar electronegativities.
To know more about chemical bonds, visit:
https://brainly.com/question/12907148
#SPJ1
the defense mechanism in which self-justifying explanations replace the real, unconscious reasons for actions is group of answer choices rationalization. denial. projection. reaction formation. displacement.
Answer: The defense mechanism in which self-justifying explanations replace the real, unconscious reasons for actions is Rationalization.
Rationalization is a type of defense mechanism where individuals create a logical explanation for their own behavior, even if the behavior is actually driven by emotions or unconscious thoughts.
This type of defense is used to protect the ego from the anxiety of a certain situation, usually one that is perceived to be too uncomfortable or overwhelming.
By rationalizing a behavior, the individual is able to tell themselves that they did the right thing, even if the choice was not made consciously or with the best intentions. Rationalization is a way to protect one’s ego by creating a logical justification for an action.
Learn more about rational behavior here:
https://brainly.com/question/24229313#
#SPJ11
in a diffuser operating at steady state, the enthalpy change of the working fluid is 10 kj/kg. what is the the kinetic energy change?]
The kinetic energy change of a diffuser operating at a steady state is 10 kJ/kg.
The kinetic energy change of the fluid is equal to the work done by the fluid on the surroundings, as it is assumed that there are no changes in potential energy in a steady-state diffuser. Thus, the work done by the fluid on the surroundings is equal to the kinetic energy change.
It can be assumed that the diffuser is an adiabatic system, meaning there is no heat transfer to or from the system. This means that the change in enthalpy is equal to the change in the internal energy of the system. Since the diffuser is operating at a steady state, the change in kinetic energy is zero.
Learn more about enthalpy:
https://brainly.com/question/30431725
#SPJ11
Consider the Baeyer permanganate test and chromic acid tests. These tests work by converting an aldehyde to what functional group? 1 KMnO4 and H2CrO4 act as what kind of reagent? (e.g. electrophile, nucleophile, oxidizing agent, reducing agent, acid catalyst, base catalyst, solvent etc.) 2. 3. Why does a ketone not react with these reagents?
The Baeyer permanganate test and chromic acid tests work by converting an aldehyde to a carboxylic acid functional group.
KMnO₄ and H₂CrO₄ act as oxidizing agents. A ketone does not react with these reagents because it does not have a hydrogen atom attached to the carbonyl group.
How does the Baeyer permanganate test work?The Baeyer permanganate test is used to identify the presence of unsaturation (i.e. double bonds) in a compound. When a double bond is present in the compound, it will be oxidized by potassium permanganate (KMnO₄) to form a diol functional group. In the case of aldehydes, the double bond is present between the carbonyl carbon and the hydrogen atom.
Therefore, the reaction will convert an aldehyde to a carboxylic acid functional group. This reaction is also known as the oxidation of aldehydes with KMnO₄.
What is the chromic acid test?The chromic acid test is another method for identifying the presence of unsaturation in a compound. It uses chromic acid (H₂CrO₄) as the oxidizing agent. Like the Baeyer permanganate test, the chromic acid test will convert an aldehyde to a carboxylic acid functional group. It is important to note that the chromic acid test is more sensitive to the presence of double bonds than the Baeyer permanganate test.
Therefore, it is often used as a confirmatory test after a positive result is obtained from the Baeyer permanganate test.
Learn more about chromic acid test on:
https://brainly.com/question/30824151
#SPJ11
as electrons are passed down an electron transport system, choose one: a. h2o is produced. b. the electrons are also pumped across a membrane. c. protons are pumped across a membrane. d. nadh is produced.
As electrons are passed down an electron transport system protons are pumped across a membrane.
The correct answer is option C.
When electrons pass through the electron transport chain, they lose energy. As low-energy electrons break down oxygen molecules and produce water, high-energy electrons from NADH or FADH2 complete the chain. The electron transport pathway produces three molecules of water for every three carbon sugars broken down during aerobic respiration.
This means that when six carbon sugars are broken down, six molecules of water are produced. The end products of electron transport include NAD+, FAD, water, and protons. Since protons are propelled through the crystal membrane by the free energy of electron transport, they exit the mitochondrial matrix.
Learn more about electron transport system at
https://brainly.com/question/28163074
#SPJ4
what is the percentage of the renantiomer in a sample of limonene that has a specific rotation ot -38, given that the specific rotatic of (s)-limonene is - 116?
Answer: The percentage of the (R)-limonene in the sample is 67.24%.
The percentage of the (R)-limonene in a sample of limonene with a specific rotation of -38 can be calculated using the following equation:
Percentage (R)-limonene = (Specific rotation of sample - Specific rotation of (S)-limonene) ÷ (Specific rotation of (S)-limonene) x 100%
In this case, the equation is:
Percentage (R)-limonene = (-38 - (-116)) ÷ (-116) x 100% = 67.24%
Therefore, the percentage of the (R)-limonene in the sample is 67.24%.
Learn more about enantiomer here:
https://brainly.com/question/30845514#
#SPJ11
in the experiment where o2 consumption is measured with a respirometer how is a constant volume achieved?
by use identical respirometers. An intermediary in this process is pyruvate.
What kind of process uses pyruvate as an intermediary?Pyruvate is a crucial intermediary in several metabolic processes, including gluconeogenesis, fermentation, cellular respiration, fatty acid production, etc. Pyruvate is created near the conclusion of the glycolysis process. Through Kreb's cycle, pyruvate gives energy to living cells.
Is pyruvate a metabolic intermediary in all processes?Pyruvate is a crucial intermediate that can be employed in a number of anabolic and catabolic pathways, including as oxidative metabolism, glucose re-synthesis (gluconeogenesis), cholesterol synthesis (de novo lipogenesis), and maintenance of the tricarboxylic acid (TCA) cycle flow.
To know more about respirometers visit:-
https://brainly.com/question/15609292
#SPJ1
presented with two tubes: one tube with a buffered solution + acid and one tube with water + acid, how will you know which tube has the buffer and which tube does not have the buffer?
One tube has a buffered solution + acid and the other tube has water + acid. To decide whether or not the solution is buffered, a simple pH test can be done. An acid-base indicator can be used to determine the pH of each solution.
A buffered solution is defined as a solution that can withstand minor changes in pH upon the addition of small amounts of an acid or base.
Consider the following steps:
To both tubes, add a small amount of acid-base indicator. Determine the pH of each solution by observing the color change of the acid-base indicator when it is added to it. The pH of the solution is determined by the color of the acid-base indicator after it has been added to it. Compare the pH of the two solutions. The solution with the lower pH is likely to have a buffer, whereas the solution with the higher pH is unlikely to have a buffer. This is due to the fact that the addition of an acid to a buffered solution would result in a lower pH, whereas the addition of an acid to an unbuffered solution would result in a higher pH. To find out which tube has the buffer and which does not, one has to compare the pH of each solution.Learn more about buffer: https://brainly.com/question/9458699
#SPJ11
A plastic container with a mass of 30 grams has a temperature increase from 20°C
to 40°C. How much heat was added to the plastic if the specific heat is 1.9 J/g °C.
Which water is distributed on Earth from the greatest to the least
The water distributed on Earth from the greatest to the least is saltwater, freshwater, and frozen water.
Saltwater occupies 97.5% of Earth's total water. Freshwater occupies only 2.5% of Earth's total water. This freshwater is found in different forms, such as rivers, lakes, underground, and glaciers. Only 0.3% of freshwater is found in rivers and lakes, while 30% is stored underground. The rest of freshwater is stored in glaciers and polar ice caps.
The frozen water found on Earth is 1.7% of the total water. It is found in glaciers, ice caps, and snow cover around the poles. The water cycle is a natural process that allows water to move from one place to another on Earth. It is also called the hydrologic cycle. It involves the movement of water between the earth, air, and ocean.
Water evaporates from the surface of the earth, which forms clouds. The clouds then precipitate as rain, snow, or hail. This precipitation may fall on the land and join rivers and lakes, or it may seep into the ground and form underground water. The underground water may then resurface as springs or streams, which then join rivers and lakes.
The water cycle helps to purify water and replenish freshwater resources on earth. It also helps to regulate the Earth's temperature by absorbing heat during the day and releasing it at night.
For more such questions on water, click on:
https://brainly.com/question/30173238
#SPJ11
CHEMISTRY HELP NEEDED
Why is critical mass important for a fission chain reaction?
- it keeps the neutrons from escaping the sample
- it keeps neutrons from being absorbed by other isotopes
- it allow neutrons to e absorbed by other fissionable nuclei
- it provides enough fuel to make enough energy
Why is a moderator important for a fission chain reaction?
- it keeps the neutrons from escaping the sample
- it keeps neutrons from being absorbed by other isotopes
- it allow neutrons to e absorbed by other fissionable nuclei
- it provides enough fuel to make enough energy
Why is enrichment important for a fission chain reaction?
- it keeps the neutrons from escaping the sample
- it keeps neutrons from being absorbed by other isotopes
- it allow neutrons to e absorbed by other fissionable nuclei
- it provides enough fuel to make enough energy
1. We can see here that critical mass is important for a fission chain reaction because: C. It allow neutrons to be absorbed by other fissionable nuclei.
What is fission chain reaction?Fission chain reaction is a self-sustaining reaction in which the splitting of atomic nuclei of a particular material, such as uranium or plutonium, releases a large amount of energy in the form of heat and radiation.
2. A moderator is important for a fission chain reaction because: A. it keeps the neutrons from escaping the sample.
3. Enrichment is important for a fission chain reaction because: D. it provides enough fuel to make enough energy.
A moderator is important for a fission chain reaction because it slows down the fast-moving neutrons, making them more likely to be absorbed by other fissionable nuclei and sustain the chain reaction. Without a moderator, the neutrons would move too quickly to be efficiently absorbed.
Learn more about fission chain reaction on https://brainly.com/question/24892298
#SPJ1