if 34.4 grams of pentane (c5h12) are burned in excess oxygen, how many grams of h2o will be produced?

The Avogadro's number is used to obtain the required results as;

1) 4.69 g

2) 4.26 g

3) 2.158 g

4) 381 g

5) 348.5 L

6)  1008 L

7) 3.6 L

8) 4.7 * 10^4 g

9) 112 L

The Avogadro’s number could be used to deduce the amount of substance. Let us recall that in the theory of Professor Avogadro, the mole is the number of elementary entities of a substance. In this case these elementary entities is a reference to the atoms, molecules and ions that could be found in the substance. With that in mind, we shall now carry out the calculations.

1)  6.02 * 10^23 atoms of helium has a mass of 4g

7.06 x 10^23  He atoms of He has a mass of 4.69 g

2) 6.02 * 10^23 atoms of Mg has a mass of 24 g

1.07 x 10^23 Mg atoms has a mass of 4.26 g

3) 6.02 * 10^23 molecules of O2 has a mass of 32 g/mol

4.06 x 10^22 molecules of O2 has a mass of 2.158 g

4) 6.02 * 10^23 molecules of CO has a mass of 28 g

8.19 x 10^24 molecules CO has a mass of 381 g

5) Number of moles = 2800g/180 g/mol = 15.56 moles

Given that 1 mole occupies 22.4 L

15.56 moles occupies 348.5 L

6) Given that 1 mole occupies 22.4 L

45 moles occupies 1008 L

7) Number of moles of Fe = 9.2 g/56 = 0.16 moles

Given that 1 mole occupies 22.4 L

0.16 moles occupies 3.6 L

8) 6.02 * 10^23 particles have a mass of 102 g

2.8 x 10^26 particles have a mass of 4.7 * 10^4 g

9) Given that 1 mole occupies 22.4 L

5 moles of the acid occupies 112 L

Learn more about Avogadro’s number:https://brainly.com/question/11907018

#SPJ1

The new concentration of the solution of KBr diluted to 500 mL is 0.106 M

To solve this problem, the formula and the procedure that we have to use is:

c1 * v1 = c2 * v2

Where:

Information about the problem:

Applying the dissolution of concentrations formula and clearing the concentration of the diluted solution(c2), we get:

c1 * v1 = c2 * v2

0.530 M * 100.0 mL = c2 * 500.0 mL

c2 = (0.530 M * 100.0 mL ) / 500.0 mL

c2 = 0.106 M

In chemistry a solution is known as a homogeneous mixture of two or more components called:

Learn more about chemical solution at: brainly.com/question/13182946

#SPJ4

James Chadwick discovered the neutron, which was the last of the subatomic particles to be characterized.

James Chadwick bombarded alpha particles on the beryllium surface using radioactive decay o polonium as a source. He discovered penetrating particles with no charge. These particles were fast-moving with no positive or negative charge.

These radiations were made incident on paraffin wax. This experiment was very similar to Rutherford's experiment.

The mass of the neutron was almost equal to the mass of the proton but its penetrating power was higher than a proton. It can penetrate several inches of lead.

If you need to learn more about neutron, click here

https://brainly.com/question/15120322?referrer=searchResults

#SPJ4

The answers would be for 2nd and 3rd composites are X3Z4 and X4Z3.

The given questions is incorrect, the question is that the first emulsion has the formula X2Z3. also what is the chemical formula for alternate and also the third emulsion?

According to the question,

Mass of X in first emulsion = 1.0 g

Mass of Z in first emulsion = 0.472 g

The chemical formula of first emulsion = X2Z3

This means1.0 g of X is over to 2 intelligencers of X

= > One operative of X = 0.5 g of X.

g of Z is similar to 3 intelligencers of Z< = > one operative of Z = 0.15733 g of X.

Now for the Alternate emulsion,

Mass of X = 1.0 g

intelligencers of X = 1.0/0.5 = 2

Mass of Z = 0.420 grams

Number of intelligencers of Z = 0.420/0.15733 = 2.6695 intelligencers

rate of intelligencers of X to Z = 22.6695 = 3 4

Empirical formula of alternate emulsion = X3Z4

Now for the third emulsion,

Mass of X = 1.0 g

Intelligencers of X = 1/0.5 = 2 intelligencers

Mass of Z = 0.236 grams

Number of intelligencers of Z = 0.236/0.15733 = 1.5 intelligencers

Rate of intelligencers of X to Z = 21.5 = 4 3

Empirical formula of third emulsion = X4Z3

To know more about empirical formula here :

https://brainly.com/question/14044066?referrer=searchResults

#SPJ4

The reactants has greater energy in an exothermic reaction. Exothermic reactions often produce heat as defined by thermochemistry.

Exothermic reactions often produce heat as defined by thermochemistry as "reactions for which the total standard enthalpy change H is negative."

According to the energy diagram below, in an exothermic reaction, the reactants have a greater energy level than the products. The products are therefore more stable than the reactants. Overall, the reaction's H H H is negative, meaning that energy is expelled as heat.

When new bonds form in the products, less energy is produced during an exothermic reaction than is required to break bonds in the reactants. Energy is continuously released during an exothermic process, frequently in the form of heat. Exothermic reactions characterise all combustion processes.

to learn more about exothermic reaction go to -

https://brainly.com/question/1831525

#SPJ4

less than 25 gallons of flammable or combustible liquids can be stored in a room outside of an approved storage cabinet.

less than 60 gallons of flammable or 120 gallons of combustible could be stored in any of the storage cabinet.

Avoid storing flammable liquids on high shelves or in direct sunlight. Store flammable liquids during a well ventilated area. Caution: Never use environmental rooms (also called cold/ warm rooms) to keep flammable, combustible, or other hazardous materials.

When not using flammable liquids should be placed in an appropriate flammable storage cabinet. Individual containers must be clearly marked to point their contents and the degree of flammability. In opinion 50 litres of flammable liquids can be kept in a room within corrective flammable storage cabinets.

Learn more about flammable liquids:

brainly.com/question/28222891

#SPJ4

PH = 2.64

PH = - log [H+]

[H+] = 0.00229 M

HA = 0.0199 M

Dissociation equation

HA --> H+ + A-

Ka = [H+][A-]/[HA]

[H+] = [A-]

Ka = (0.00229^2)/0.0158

=3.31 x 10^-4M

What is monoprotic acids?

Any acid with only one hydrogen atom in its formula is called a monoprotic acid, while some acids with multiple hydrogen atoms may also fall under this category. In other words, while all monoprotic acids contain only one hydrogen, not all single-hydrogen acids are monoprotic.
Therefore,

Enough of a monoprotic acid is dissolved in water to produce a 0.0158 m solution. the ph of the resulting solution is 2.64. calculate the a for the acid.

pH = 2.64

pH = - log [H+]

[H+] = 0.00229 M

HA = 0.0199 M

Dissociation equation

HA --> H+ + A-

Ka = [H+][A-]/[HA]

[H+] = [A-]

Ka = (0.00229^2)/0.0158

=3.31 x 10^-4M

To learn more about monoprotic acid from the given link:

https://brainly.com/question/3006391

#SPJ4

Answer:

of course A

Explanation:

1.89*10³

1890

Answer: sodium ethanoate

Explanation: I believe that this is correct

In this experiment, simple organic compounds as well as more sophisticated organic compounds including amino acids and hydrocarbons were created.

What is Stanley miller's experiment?

Stanley Miller, a scientist, carried out an experiment in 1953 that might shed light on what happened on the early Earth billions of years ago. In a flask containing a mixture of methane, ammonia, hydrogen, and water, he passed an electrical charge across it. Organic substances, such as amino acids, were produced as a result.

Based on the idea that life might have started from simple chemicals found on the early Earth, Miller conducted the renowned experiment in 1953.

To learn more about Stanley miller's experiment click the given link

https://brainly.com/question/515994

#SPJ4

Answer: three significant figures

Explanation: All zeroes between two nonzero digits are significant, for example, 101 contains three significant figures.

Since half-life of carbon-14 is 5600 years, 1.5625mg of the element will be remaining after 33600 years.

The duration needed for a quantity of a substance to decrease to half of its initial value is known as the half-life. In nuclear physics, the phrase is frequently used to indicate how rapidly unstable atoms disintegrate radioactively or how prolonged stable atoms last. The duration it takes for half of an element in a radioisotope to decay is known as the half-life. The faster an atom decays and the shorter its half-life, the more unstable it is. Additionally, the phrase can be used more broadly to describe any kind of exponential decay.

Given:

Initial quantity of substance, [tex]N_0[/tex] = 100mg

Half-life of the substance, [tex]t_{1/2}[/tex] = 5600 years

Time elapsed, t = 33600 years

To find:

Quantity of substance remaining, [tex]N_t[/tex] = ?

Formula:

[tex]N_t = N_0 * (\frac{1}{2}) ^ (\frac{t}{t_\frac{1}{2} } )[/tex]

Calculations:

[tex]N_t = 100 * (\frac{1}{2}) ^ \frac{33600}{5600}[/tex]

[tex]N_t = 100 * (\frac{1}{2}) ^6[/tex]

[tex]N_t[/tex] = 100 x 0.015625

[tex]N_t[/tex] = 1.5625mg

Result:

Remaining carbon-14 after 33600 years is 1.5625mg.

Learn more about Half-life here:

https://brainly.com/question/24710827

#SPJ4

The balanced chemical reaction is: ca(oh)2(aq) + 2hcl(aq)-->2 h2o(l).

Redox is a sort of chemical reaction where the substrate's oxidation states change.

An rise in an object's oxidation state or the loss of electrons is referred to as oxidation.

Gaining electrons or lowering an atom's oxidation state are both considered to be reductions in the context of chemical reactions.

Redox reactions can be divided into two categories:

only one electron (typically) moves from the reducing agent to the oxidant during an electron transfer. Redox couples and electrode potentials are frequently used to describe this type of redox reaction.

Atomic transfer refers to the movement of an atom from one substrate to another. For instance, when iron rusts, iron atoms get more oxidized as they change into an oxide at the same time.

To learn more about redox reaction from the given link:

https://brainly.com/question/459488

#SPJ4

[tex]P_{solvent}[/tex] = [tex]X_{solvent }[/tex] × [tex]P\textdegree _{solvent}[/tex] and

ΔP = [tex]X_{solute}[/tex] ×[tex]P\textdegree _{solvent}[/tex]  are the two options that correctly shows the relationships between solute concentration and solution vapor pressure.

Vapour pressure over a pure liquid as calculated using the Clausius-Claperyron equation. A solution is created when a solute is added to a pure liquid; the pure liquid that was the solute's original container is now the solvent.

Whether the solute is volatile or nonvolatile will determine how the solute affects the vapour pressure above the solution. The sole reason nonvolatile solutes lower the vapour pressure above the solution is because of the solvent molecules.

It is more difficult to combine volatile solutes that produce miscible solutions because each item has a vapour pressure, and the overall vapour pressure is the sum of all the partial vapour pressures.

A solvent plus a solute make up a typical solution. One of the most popular solvents is water, and you may see how various solutes behave in it. Non-volatile solutes, for instance, do not vaporise and release gas. Despite having a low vapour pressure, they typically have a high boiling point.

Learn more about  Non-volatile solutes

https://brainly.com/question/26414694

#SPJ4

Some of them consist of two small atoms attached to a bigger one. Some are negatively charged, and consist of one big atom attached to the small one. The arrow is pointing to a hydrogen ion.

Option A is correct

The hydrogen ion is the only particle that is an atom and also carry a positive charge, i.e., a hydrogen ion is a positively charged atom.

Learn more about hydrogen ion :

brainly.com/question/28444954

#SPJ4

Question is in complete , missing part is given below :

The figure shows a solution of different molecules. Some of them consist of two small atoms attached to a bigger one. Some are negatively charged, and consist of one big atom attached to the small one. There are also small positively charged atoms, which are pointed by an arrow.

A. hydrogen ion

B. hydronium ion

C. electron

D. hydroxide ion

E. water molecule

moles of hydrogen present in a 43.50 ml sample at 25.5 degrees celsius and 772.8 torr are 0.0017

This problem can be solved by ideal gas law

PV=nRT

P = pressure, 772.8torr × (1atm/ 760 torr)= 1.01 atm

V = volume, 43.50mL (1L/1000mL)= 0.0435L

T = temperature, 25 deg celcius or 273 +25.5= 298.5K

R = 0.0821 (L*atm/K*mol) (constant)

We have to find out n

n= PV/RT

n= (1.01atm)(0.0435L) / (0.0821 L*atm/K*mol) (298.5K)

n= 0.0439 / 24.5

n = 0.0017

Therefore, no of moles of hydrogen are 0.0017.

Learn more about ideal gas equation here:

https://brainly.com/question/26040104

#SPJ4

445.616 lb of CO2.

Equation for the reaction:

C8H18 + 25/2O2(g) --> 8CO2(g) + 9H2O(g)

Given:

The volume of gasoline = 25gallon

Converting gallon to ml,

25 gallon * 3.785 l/1 gallon * 1000 ml/1 l

= 94,625 ml

Density of the gasoline = 0.692 g/ml

Mass = density * volume

= 94,625 * 0.692

=  65480g

Molar mass of octane = (8*12) + (18*1)

= 114 g/mol.

Number of moles = mass/molar mass

= 65480/114

= 574.390 mol.

From the above equation, 1 mole of octane was completely burnt to give off 8 moles of CO2.

By stoichiometry,

Number of moles of CO2 = 574.390* 8

= 4595.122 mol of CO2.

Molar mass of CO2 = 12 + (2*16)

= 44 g/mol

Mass of CO2 = number of moles * molar mass

= 4595.122 * 44

=202,185.40 g

Converting g to pound,

= 202,185.40 g *1 kg/1000 g * 2.204 lb/1kg

= 445.616 lb of CO2.

Learn more about moles here:-

https://brainly.com/question/3262

#SPJ4

One molecule of sucrose is burned with oxygen to make carbon dioxide and water.

What is sucrose?

The components of the disaccharide sugar sucrose are glucose and fructose. It is produced naturally by plants and is the main component of white sugar. C12H22O11 is the chemical formula for it.

To extract and refine sucrose for human use, either sugarcane or sugar beet are employed. Crushing the cane creates raw sugar, which is subsequently delivered to other sectors to be refined into pure sucrose. Sugar mills are usually located in tropical regions near to sugarcane plantations.

C12H22O11 + 12O2 = 12CO2 + 11H2O

When one molecule of sucrose is burnt, we get 12 carbon dioxide molecules.

To learn more about sucrose from the given link below,

https://brainly.com/question/13500067

#SPJ4

Answer: 106.68 cm

Explanation:

1 inch=2.54 cm

42 inches * 2.54 cm/1 in=

42 * 2.54 = 106.68 cm

If the value of heat, q, is positive when the temperature of a sample of water changes, then : the temperature of water was increased.

What is the relation between heat flux and temperature?

A substance's temperature is a macroscopic indicator of how quickly the atoms or molecules inside are vibrating about their mean locations. The increase in kinetic energy of these particles is reflected as an increase in temperature when heat is applied to a body.

The heat q and the temperature change Δ T : connection is the mathematical relationship at the core of this inquiry.

q = m c Δ T ,

where c is the substance's specific heat capacity and m is the substance's mass. The last two amounts can never be negative, it should be noted.

A positive value of heat hence always suggests a positive change in temperature. In other words, if heat is positive, the substance has received heat energy, increasing its ultimate temperature over its initial temperature.

Question:

If the value of heat, q, is positive when the temperature of a sample of water changes, then:

a. the temperature of water was decreased.

b. the temperature of water was increased.

c. it depends on whether mass and specific heat values are positive or negative.

d. None of the above.

To learn more about  specific heat capacity click on the link below:

https://brainly.com/question/22991121

#SPJ4

Answer:

Tbh it doesn't look right because A D are atoms B E C are molecules.

Explanation:

The reason I think that is because E is the molecule of elements while B and C are molecules of compounds can you maybe recheck?

The nuclide thorium-230 undergoes alpha emission to give radium-226

Thorium-230 undergoes alpha decay, a form of nuclear decay in which an alpha particle is ejected from the nucleus, and as a result, produces alpha radiation. Because of the imbalance in the energy working to hold the nucleus together or drive the nucleus apart caused by unstable isotopes' neutron to proton ratio, these isotopes are unstable.

This thorium then changes into protactinium 234 and experiences beta-negative decay to yield uranium 234 as a byproduct. With a half-life of 245,000 years, this final isotope progressively decays into thorium 230, another unstable nucleus. Only the creation of a stable nucleus can end any such decay chain.

The nuclide whose radioactive decay product is a certain daughter nuclide is referred to as the parent nuclide (plural parent nuclides) in physics.

To lean more about radium-226 from the given link.

https://brainly.com/question/3499464

#SPJ4

Am, In, Ta, As, Se, Rn, Hf, Am

Tantalum and hafnium are transition metals.

An inner transition element is americium.

Main group elements include radon, selenium, and indium.

Metalloids include arsenic.

What is transition metals?

The concise IUPAC definition is expanded by Cotton and Wilkinson by detailing which elements are included. They add scandium and yttrium from group 3, which have a partially full d sub-shell in the metallic state, along with the elements of groups 4 to 11.

They classify lanthanum and actinium as group 3 elements, while they are actually categorized as lanthanides and actinides, respectively.

To learn more about transition metals click the given link

https://brainly.com/question/2879928

#SPJ4

The correct answer is [a].The percent by mass of sodium chloride in a solution of 14.0 g of sodium chloride in enough water to make 91.0 g of solution is 15.4%.

Solution, in chemistry, homogenous mixture of two or more substances in relative amounts that can be varied continuously up to what is called the limit of solubility.

The term solution is commonly applied to liquid state of matter, but solutions of gases and solids are possible. Air, for example, is a solution consisting chiefly of oxygen and nitrogen with the trace amounts of several other gases, and brass is a solution composed of copper and zinc.

Solutions play a significant role in the processes of life. In blood plasma, oxygen from the lungs dissolves and chemically joins with hemoglobin in red blood cells before being delivered to the body's tissues. The byproducts of digestion are also transported to other bodily areas in solution. Many real-world situations can be solved by using liquids' capacity to dissolve other liquids or solids.

Chemists take advantage of differences in the solubility to separate and purify materials and to carry out chemical analysis. Most chemical reactions occur in solution and are influenced by solubilities of the reagents. Materials for chemical manufacturing equipment are selected to resist solvent action of their contents.

Percent by mass= [tex]\frac{weight of solute}{weight of solution}[/tex]*100= [tex]\frac{14}{91}*100= 15.4%[/tex][tex]%[/tex]%

To know more about sodium chloride visit: brainly.com/question/9811771

#SPJ4

The absolute pressure (in pa) is 4.0Pa.

The mass of one molecule of air may be computed as

m =  Molecular weight / Avogadro’s number

m = 28.97 / 6.023×[tex]10^{23}[/tex]

m = 4.81×[tex]10^{-23}[/tex] g

Then the density of air containing [tex]10^{12}[/tex] molecules, in SI units,

ρ =  [tex]10^{12}[/tex] × 4.81×[tex]10^{-23}[/tex] = 4.81×[tex]10^{-5} kg/m^{3}[/tex]

Finally, from the perfect gas law, , at 20°C = 293 K, we obtain the pressure:

p = ρRT

P = 4.81×[tex]10^{-5} kg/m^{3}[/tex]×287×293

p = 4.0Pa

So, the absolute pressure (in pa) is 4.0Pa.

Learn more about pressure here;

https://brainly.com/question/15379358

#SPJ4

We may never know the number of people became ill or died as a result of the Chernobyl accident because cancer might not occur for many years after the exposure to the ionizing radiation.

Many of the first responders of the Chernobyl accident died within hours or days of working at the explosion site because of acute radiation sickness.

The Chernobyl accident occur in 1986 due to flawed reactor design operated by untrained personnel.

The Chernobyl did cause serious radiation sickness and contamination over a large population. Although it is difficult to determine the extent to which the negative effects of Chernobyl reached.

Radiation exposure is hazardous and impacts health of people in negative ways, causing cancer and other serious and life threatening illness. Chernobyl caused the same effects as explosions caused radioactive particles to scatter and these moved through the ecosystem through bioaccumulation.

The Chernobyl accident showed us that exposure to radiation can affect people to varying extents over different time scales.

To learn more about Chernobyl accident,

https://brainly.com/question/15297432

#SPJ4

Answer:

Born:  21 November, 1851, Baltimore, Maryland, United States

Died: 17 April , 1898, Baltimore, Maryland, United States

He is an American baseball player,  known as being one of the inventors of the spitball pitch, which was rediscovered or reintroduced to the major leagues after he died. He earned run average: 2.86

Explanation:

I hope this helps

[tex] \bf \implies \: 15.5 \: km[/tex]

We know that,

1 m = 1000 km

1 km = 1/1000 m

We have converted 15500 m to km

[tex] \mapsto \bf \frac{155 \cancel{0} \cancel{0}}{10 \cancel{0} \cancel{0}} = \frac{155}{10} = 15.5 \: km[/tex]

20^250 unique sequence can be formed with different 250 amino acid long polypeptides.

Therefore, the correct option is a) 20^250

Learn more about amino acids here:

https://brainly.com/question/2526971

#SPJ4