if 44.5 l of nitrogen at 848 mm hg are compressed to 976 mm hg at constant temperature. what is the new volume?

The pressure of gas is 1.05 atm when a 1.25 g sample of CO₂ is contained in a 750ml flask at 22.5°C.

Molecular weight of CO₂ is 1.25g ,Volume of CO₂ is 750ml,Temperature of CO₂ is 22.5°C and the gas constant is 0.08206 L atm/mol K.

Using the ideal gas law equation the pressure is found to be 1.05 atm.

To calculate the pressure of the gas, we can use the ideal gas law equation: [tex]PV=nRT[/tex]
Where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
First, we need to convert the volume to liters by dividing by 1000: 750 ml = 0.75 L.
Next, we need to calculate the number of moles of CO₂ present in the flask. We can use the molecular weight of CO₂ to convert from grams to moles:

[tex]1.25 * (1 /44.01 ) = 0.0284 mol[/tex]
Now we can plug in the values into the ideal gas law equation:

[tex]PV=nRT[/tex]
[tex]P * 0.75 L = 0.0284 mol  * 0.08206 L*atm/mol*K * (22.5 + 273.15) K[/tex]
Simplifying and solving for P, we get:
[tex]P = (0.0284 * 0.08206 * 295.65) / 0.75 = 1.05 atm[/tex]
Therefore, the pressure of the gas in the flask is 1.05 atm.

Learn more about ideal gas law equation here:

https://brainly.com/question/15379358

#SPJ11

High quality charcoal that is lightweight and easily broken is made from hardwoods such as oak, maple, and hickory.

Charcoal is a porous, black, carbon-rich material that is produced by heating organic matter (such as wood or coconut shells) in the absence of air. The quality of charcoal can vary depending on the type of organic matter used, as well as the production method.

High quality charcoal that is lightweight and easily broken is typically made from hardwoods such as oak, maple, and hickory. These woods have a high density and a low moisture content, which makes them ideal for producing charcoal with a high carbon content and low ash content. In addition, the heating process used to produce this type of charcoal is typically done at high temperatures for a short period of time, which helps to remove impurities and create a more porous and lightweight material.

Overall, the type of organic matter used and the production method are important factors in determining the quality of charcoal, with hardwoods being a common choice for producing high quality charcoal that is lightweight and easily broken.

To learn more about High quality charcoal, here

https://brainly.com/question/19402908

#SPJ4

The reaction of both cis and trans isomers of 2,3-dimethyloxirane with HBr gives butane-2,3-diol. However, one of these stereoisomers gives a single achiral product, while the other gives two chiral enantiomers.

The reaction of 2,3-dimethyloxirane with itself is an example of an intramolecular nucleophilic substitution reaction.

The cis isomer of 2,3-dimethyloxirane has a plane of symmetry and is therefore an achiral molecule. When it reacts with itself, it will only form a single product nucleophilic substitution reaction.

The trans isomer of 2,3-dimethyloxirane is a chiral molecule and does not have a plane of symmetry. When it reacts with itself, it will form two enantiomers of the product, one being the mirror image of the other.

Learn more about 2,3-dimethyloxirane

https://brainly.com/question/15181918

#SPJ4

The change of state described is melting (option C). In melting, the particles of a substance gain energy and change from a regular ordered structure to a disordered structure with large distances between the particles, which results in the substance changing from a solid to a liquid state.

Melting is a physical process in which a substance changes from its solid state to its liquid state. It occurs when a solid substance absorbs enough heat energy to overcome the forces of attraction between its particles, causing the particles to move faster and become less ordered.

As a result, the substance loses its definite shape and takes the shape of the container in which it is placed, while retaining its volume. The temperature at which a substance melts is known as its melting point.

An example of melting is the melting of ice. At the melting point of water, which is 0°C (32°F) at standard pressure, ice changes from its solid state to its liquid state. The resulting liquid water takes the shape of its container, such as a glass, but still has the same volume as the ice from which it was melted.

Learn more about melting here:

https://brainly.com/question/15873508

#SPJ9

The outcomes to the scan had been now not all similar. The pots with the pH of 5.0 had no growth whatsoever. The pots with the pH of 6.0 had little growth, each with only four blades of grass. The pots with a pH of 7.0 grew well, one pot with extra blades of grass than the other, an average of 11 blades of grass

Natural soil pH depends on the rock from which the soil was once fashioned (parent material) and the weathering procedures that acted on it—for instance climate, vegetation, topography and time. These approaches have a tendency to purpose a decreasing of pH (increase in acidity) over time.

There is disruption of nutrient absorption by way of the plants if it's pH increases, and hence, soil fertility is reduced, alkaline soil's pH does not lead to make bigger in nutrient absorption, soil illness does not happen.

Learn more about  effect of pH on plant growth here:

To draw the product of an SN2 reaction and indicate stereochemistry:

1. Identify the substrate, nucleophile, and leaving group in the reaction.
2. Locate the carbon atom attached to the leaving group in the substrate. This is the electrophilic center.
3. The nucleophile will attack the electrophilic center from the opposite side of the leaving group, causing the leaving group to depart.
4. The nucleophile forms a bond with the electrophilic carbon, resulting in the formation of the product.
5. Since the nucleophile attacks from the opposite side, the stereochemistry at the electrophilic center will be inverted in the product.

To write the inorganic product in the answer palette, you should include the leaving group as a negatively charged anion (e.g., if the leaving group was Br, write Br-).

To know more about SN2 reaction:

https://brainly.com/question/30631335

#SPJ11

This weather map shows that there is a low pressure system in the north and a high pressure system in the south.

Weather is the study of atmospheric conditions that exist in a specific area over a short period of time. It is the sum of all atmospheric conditions including temperature, humidity, wind, air pressure, cloud cover and precipitation. Weather is an important factor in determining the temperature, humidity and other characteristics of the environment. It affects human activities such as agriculture, transportation and recreation. Weather is dynamic and constantly changing. It is affected by a variety of factors such as solar radiation, air pressure, ocean currents, land topography and human activities. Weather is also affected by climate, which is the average weather pattern over a long period of time. Understanding weather is important for many reasons, including to predict storms and floods, to plan for extreme weather events, and to prepare for natural disasters.

This weather map shows that there is a low pressure system in the north and a high pressure system in the south. The low pressure system is bringing cooler temperatures and precipitation, while the high pressure system is bringing warmer temperatures and clear skies. There is a cold front moving eastward from the north, and a warm front moving eastward from the south.

To learn more about weather

https://brainly.com/question/29709289

#SPJ9

Answer: NA = no of molecules / no of moles

NA = no of molecules × molecular weight /weight

Explanation:

Density is defined as the mass of a substance per unit volume. In this case, the density of urine is given as 1.02 g/ml. This means that for every 1 ml of urine, there is 1.02 g of mass.

To find the mass of urine eliminated by the patient in one day, we need to multiply the volume of urine by its density. The volume of urine is given as 1250 ml.

Mass of urine = Volume of urine x Density of urine

Mass of urine = 1250 ml x 1.02 g/ml

Mass of urine = 1275 g

Therefore, the mass of urine eliminated by the patient in one day is 1275 g.

Learn more about  volume here

https://brainly.com/question/1578538

#SPJ11

Electrolysis is a process that is used to electric current is passed in a solution. The mass of cu(s) is electroplated by running 23.0 a of current through a cu2 (aq) solution for 4.00 h is equals to 64 grams.

Electrolysis is a process in which an electric current is passed in a solution. Solving electrolysis problem is more on stoichiometric calculations are, coulombs = amperes x time

1 Faraday = 96,485 coulombs

1 Faraday = 1 mole of electrons

We have to determine the mass of cu(s) is electroplated by running 23.0 a of current through a Cu (aq) solution for 4.00 h. Half reaction, [tex]Cu^{2+ } + 2e^{-} --> Cu[/tex]

Current, I = 23.0 A

Time, t = 4 hours = 4 × 3600 seconds

= 14400 seconds

Calculate the moles of Copper, n=Q ×z× F

where, Q = total charge in coulombs

Computing for Q = 13.5coulomb sec (14,400 sec) = 194,400 coulomb-sec²

So, n = 194,400 coulomb-s² /(96485 coulomb)

= 1.007 moles Cu

Molar mass = 63.55 grams per mole

Molar mass is defined as the mass of substance divided by moles of substance.

=> 63.55 grams per mole = m/ 1.007 moles Cu

=> m = 63.55 g × 1.007

=> m = 64 grams

Hence, required value is 64 grams.

For more information about electrolysis, refer:

https://brainly.com/question/24063038

#SPJ4

The enthalpy of the reactions include:

Using the heat of formation values listed below:

ΔHf°(Si) = 0 kJ/mol

ΔHf°(SiF₄) = -1613 kJ/mol

ΔHf°(F₂) = 0 kJ/mol

ΔHf°(H₂O) = -286 kJ/mol

ΔHf°(SO) = 248 kJ/mol

ΔHf°(H₂SO₄) = -814 kJ/mol

ΔHf°(KOH) = -424 kJ/mol

ΔHf°(K₂O₂) = -496 kJ/mol

ΔHf°(O₂) = 0 kJ/mol

ΔHf°(Fe₃O₄) = -1118 kJ/mol

ΔHf°(HCl) = -92 kJ/mol

ΔHf°(FeCl₂) = -341 kJ/mol

ΔHf°(FeCl₃) = -399 kJ/mol

The enthalpy of each reaction is:

(a) ΔH°rxn = [ΔHf°(Si) + 2ΔHf°(F₂)] - ΔHf°(SiF₄)

ΔH°rxn = [0 + 2(0)] - (-1613) kJ/mol

ΔH°rxn = 1613 kJ/mol

(b) ΔH°rxn = [ΔHf°(Si) + 2ΔHf°(F₂)] - ΔHf°(SiF₄)

ΔH°rxn = [0 + 2(0)] - (-1613) kJ/mol

ΔH°rxn = 1613 kJ/mol

(c) ΔH°rxn = [ΔHf°(H₂SO₄)] - [ΔHf°(SO) + ΔHf°(H₂O)]

ΔH°rxn = (-814) - [248 + (-286)] kJ/mol

ΔH°rxn = -276 kJ/mol

(d) ΔH°rxn = [6ΔHf°(KOH) + ΔHf°(O₂)] - [3ΔHf°(K₂O₂) + 3ΔHf°(H₂O)]

ΔH°rxn = [6(-424) + 0] - [3(-496) + 3(-286)] kJ/mol

ΔH°rxn = -1296 kJ/mol

(e) ΔH°rxn = [2ΔHf°(FeCl3) + ΔHf°(FeCl2) + 4ΔHf°(H₋O)] - [ΔHf°(Fe₃O₄) + 8ΔHf°(HCl)]

ΔH°rxn = [2(-399) + (-341) + 4(-286)] - [(-1118) + 8(-92)] kJ/mol

ΔH°rxn = -203 kJ/mol

Find out more on enthalpy here: https://brainly.com/question/16985375

#SPJ1

The given equation for testing the presence of lead cations (Pb) using potassium chromate (K₂CrO₄) is incorrect. The correct equation is Pb(aq) + K₂CrO₄(aq) ⇒ PbCrO4(s) + 2K+(aq).

The incorrect equation, Pb(aq) + CrO₄(aq) ⇔ PbCrO(aq), is incorrect because it does not take into account the charge balance of the species involved in the reaction. In the correct equation, two potassium ions (2K+) are formed as counter ions to balance the charge on the lead chromate (PbCrO₄) precipitate.

In addition, the incorrect equation refers to PbCrO(aq), which implies that lead chromate is in a dissolved state. However, lead chromate is highly insoluble in water and precipitates as a yellow solid. Therefore, the correct equation includes the formation of a solid precipitate of lead chromate.

To learn more about chromate follow the link:

https://brainly.com/question/31107847

#SPJ4

The complete question is:

Group 1 cations precipitate easily in a relatively high concentration of hydrochloric acid. After the separation from the other group 1 cations, the presence of lead can be tested by addition of potassium chromate. Explain what is wrong with the given equation for this test. Pb(aq) + CrO₄(aq) ⇔ PbCrO(aq)

The pH at which the molecule will be predominantly in its ionized state depends on the pKa values of the functional groups and the pH of the solution.

To determine the pH of a molecule with three functional groups, we need to consider the pKa values of each group and the pH of the solution. The pKa values represent the pH at which 50% of the functional group is ionized and 50% is in the non-ionized form.

If the pH is below the pKa of a functional group, the group will be mostly in the protonated (non-ionized) form. If the pH is above the pKa, the group will be mostly in the deprotonated (ionized) form.

Therefore, we need to determine the pKa values of each functional group and the pH at which each group is mostly ionized or non-ionized. For example, if a molecule has a carboxylic acid group (pKa = 4.5), an amine group (pKa = 9.5), and a phenol group (pKa = 10), we can use the following table to determine the predominant ionization state at different pH values:

pH    Carboxylic acid       Amine              Phenol

1           Protonated        Protonated         Protonated
4.5      Half ionized        Protonated         Protonated
7      Mostly ionized      Half ionized         Protonated
9.5   Mostly ionized      Mostly ionized    Half ionized
10     Mostly ionized      Mostly ionized    Mostly ionized
14      Deprotonated      Deprotonated     Deprotonated

Therefore, the pH at which the molecule will be predominantly in its ionized state depends on the pKa values of the functional groups and the pH of the solution.

For more such questions on predominant ionization state, visit:

brainly.com/question/30882629

#SPJ11

The term defined as a pollutant that is formed by a chemical reaction between a primary pollutant and another compound in the atmosphere (either natural or human-made) is "secondary pollutant".

Primary pollutants are directly emitted into the atmosphere from sources such as cars, factories, and power plants. Examples of primary pollutants include carbon monoxide (CO), sulfur dioxide (SO₂), and nitrogen oxides (NOₓ).

Secondary pollutants, on the other hand, are not directly emitted into the atmosphere, but are formed through chemical reactions between primary pollutants and other compounds in the atmosphere. Examples of secondary pollutants include ground-level ozone (O₃), which is formed through the reaction of NOₓ and volatile organic compounds (VOCs), and acid rain, which is formed through the reaction of SO₂ and NOₓ with water, oxygen, and other chemicals in the atmosphere.

The formation of secondary pollutants is often dependent on factors such as temperature, sunlight, and the presence of other chemicals in the atmosphere. Secondary pollutants can be just as harmful to human health and the environment as primary pollutants, and are an important consideration in air pollution control strategies.

To learn more about pollutants, here

https://brainly.com/question/28519286

#SPJ4

False. In a closed system, matter can not enter or exit that is there is no change in the matter of the system.

Three types of systems exist in nature:

1. Open System: In this system, the matter can interact with the surroundings or matter can enter or exit the system from the surrounding. Similarly, the energy of the system also interacts with its surroundings and can be lost or gained.

For example oceans etc.

2. Closed system: In this system, the matter is unable to interact with the surroundings that are matter can't exit or enter the system. While the energy of the system is able to interact with the surroundings.

For example Earth etc

3. Isolated system: In this system, both matter and energy are unable to interact with the surrounding. There is no exchange between matter and the energy of surroundings.

For example thermos-teel bottles etc.

Learn more about Open Systems:

https://brainly.com/question/28891854

#SPJ4

4. The number of each Race Car Part present in Container A are:

5. To draw the maximum number of cars that can be made from the parts in Container A:

Each car requires 1 Body (B), 4 Tires (Tr), 1 Engine (E), and 2 Cylinders (Cy).

We have 3 Bodies (B), 10 Cylinders (Cy), 2 Engines (E), and 9 Tires (Tr).

The limiting parts are the Engines (E) and the Cylinders (Cy), since we don't have enough of either part to build more than 2 cars.

Therefore, we can build a maximum of 2 complete cars from the parts in Container A, and we will have excess parts remaining:

1 Body (B)

6 Tires (Tr)

0 Engines (E)

6 Cylinders (Cy)

6. The student is incorrect because although there are 3 car bodies in Container A, we also need 4 tires, 1 engine, and 2 cylinders for each car. We don't have enough engines or cylinders to build 3 complete cars, so the number of bodies is not the limiting factor.

7. a. To determine the number of complete cars that can be built:

Each car requires 1 Body (B), 4 Tires (Tr), 1 Engine (E), and 2 Cylinders (Cy).

We have a large number of Bodies (B) and Tires (Tr), so we don't need to worry about those parts.

We only have 5 Engines (E) and 12 Cylinders (Cy).

The limiting part is the Cylinders (Cy), since each car requires 2 cylinders and we only have 12.

Therefore, we can build a maximum of 6 complete cars with the available parts:

6 Bodies (B)

24 Tires (Tr)

5 Engines (E)

12 Cylinders (Cy)

b. The limiting part is the Cylinders (Cy), since we only have enough cylinders to build 6 cars, but we have enough engines to build 5 times as many cars.

Find out more on limiting reagents here: https://brainly.com/question/19033878

#SPJ1

when molten CaF2 is electrolyzed by a current of 9.55 A for 19 h, approximately 136 g of calcium metal is produced.

To determine the mass of calcium produced when molten CaF2 is electrolyzed by a current of 9.55 A for 19 h, we'll use Faraday's Law of Electrolysis.

First, calculate the total charge passed through the electrolyte:
Charge (Q) = Current (I) × Time (t)
Q = 9.55 A × (19 h × 3600 s/h) = 653,940 C

Next, determine the number of moles of electrons (n):
n = Q / (Faraday constant F)
n = 653,940 C / (96,485 C/mol) ≈ 6.77 mol

The balanced equation for the electrolysis of CaF2 is:
2F- → F2 + 2e-
Ca2+ + 2e- → Ca

The mole ratio between calcium and electrons is 1:2. So, the number of moles of calcium produced is:
Moles of Ca = 0.5 × Moles of electrons
Moles of Ca = 0.5 × 6.77 mol ≈ 3.39 mol

Finally, calculate the mass of calcium:
Mass of Ca = Moles of Ca × Molar mass of Ca
Mass of Ca = 3.39 mol × 40.08 g/mol ≈ 136 g

To learn more about : calcium

https://brainly.com/question/29231164

#SPJ11

A 100.0-mL buffer solution is 0.175 M in HClO and 0.150 M in NaClO

The pH of a solution gives a measure of the concentration of hydronium ions in the solution, and therefore, indicates the level of acidity or basicity of the solution.

We have a buffer solution made of 0.175 M HClO and 0.150 M NaClO

Part A :

pH of buffer solution can be calculated using equation, which is given below

pH =  pKa +  log  [ Base]/[Acid]

We have [acid] = [ HClO] = 0.175 M

[Base] = [NaClO] = 0.150 M

Ka of HClO is 3.5 x 10⁻⁸   (  Note : Ka value is taken from online resource. Please check the value given to you and make the changes accordingly)

pKa =  - log ( Ka)

pKa = - log ( 3.5 x 10⁻⁸)

pKa = 7.46

pH =   7.46 +  log  ( 0.150/0.175)

pH = 7.46 + ( -0.0669)

pH = 7.39

Part B:

When we add HBr to this buffer, basic component of buffer which is NaClO would try to neutralize effect of acid HBr.

Let's write the reaction that takes place here

HBr  +   NaClO  ------------->  HClO   +   NaBr

Let's find moles of HBr , HClO and NaClO we have

mol HBr = 150 mg HBr x  1 g/1000 mg x   1mol / 80.9 g = 0.00185 mol

mol NaClO = 100 mL x 1 L/1000 mL x  0.150 mol/L = 0.015 mol

mol HClO = 100 mL x 1 L/1000 mL x  0.175 mol/L = 0.0175 mol

pH = 7.46 +  log ( 0.01315/0.01935)   ( Note : we can use mole values instead of concentration terms in this case)

pH = 7.46 + (-0.1678)

pH = 7.29

Part C:

When NaOH is added to the buffer, acidic component , HClO of the buffer tries to neutralize its effect.

The reaction  given below

NaOH  +  HClO ----->  NaClO +   H2O

mol NaOH = 85 mg NaOH x 1 g/1000 g x 1 mol/40 g = 0.002125 mol

Equilibrium mol of base NaClO = 0.0171 and acid , HClO= 0.0154

pH = 7.46 +  log ( 0.0171/0.0154)

pH = 7.46 + 0.0455

pH = 7.51.

Learn more about pH of the solution:

https://brainly.com/question/29323762

#SPJ4

Complete question:

1) A 100.0-mL buffer solution is 0.175 M in HClO and 0.150 M in NaClO.

Part A: What is the initial pH of this solution?

Part B: What is the pH after addition of 150.0 mg of HBr?

Part C: What is the pH after addition of 85.0 mg of NaOH?

To determine the initial pH of the buffer solution, we can use the Henderson-Hasselbalch equation:

pH = pKa + log([base]/[acid])

where pKa is the dissociation constant of the weak acid (HClO), [base] is the concentration of the conjugate base (ClO-), and [acid] is the concentration of the weak acid (HClO).

First, we need to calculate the pKa of HClO. The Ka of HClO is 3.0 x 10^-8, so the pKa is:

pKa = -log(Ka) = -log(3.0 x 10^-8) = 7.52

Next, we can plug in the concentrations of HClO and NaClO into the Henderson-Hasselbalch equation:

pH = 7.52 + log(0.150/0.175)

pH = 7.52 - 0.080

pH = 7.44

Therefore, the initial pH of the buffer solution is 7.44.

Visit here to learn more about buffer solution  : https://brainly.com/question/24262133
#SPJ11

2,3-dimethylbuta-1,3-diene is not a structural isomer of hexyne. Option e is correct.

Structural isomers are molecules with the same chemical formula but different arrangements of atoms. Hexyne is a hydrocarbon with six carbon atoms and one triple bond. Option (e), 2,3-dimethylbuta-1,3-diene, is not a structural isomer of hexyne because it has a different number of carbon atoms and a different type of bond. It has four carbon atoms and two double bonds, whereas hexyne has six carbon atoms and one triple bond.

Options (a), (b), (c), and (d) are all structural isomers of hexyne because they have the same number of carbon atoms and the same type of bond but different arrangements of atoms. Hence, option e is correct.

To know more about isomer, here

brainly.com/question/13422357

#SPJ4

Answer:

Explanation:

The pH of the solution is 10.80

The pH of the solution is 10.80.

Explanation: This can be calculated using the Henderson-Hasselbalch equation, which takes into account the acid dissociation constant (pKa) of the acid and the concentration of the acid and its conjugate base. The HCl dissociates completely in water, so it does not affect the pH calculation.

The methylamine acts as a weak base and reacts with water to form its conjugate acid, which determines the pH of the solution.

The pKb of methylamine is used to calculate its pKa, which is then used in the Henderson-Hasselbalch equation.

Refer to this link to know more about how to calculate the pH of a solution
https://brainly.com/question/30881040?referrer=searchResults

When an electron transitions from a higher energy state to a lower energy state within an atom, it releases energy in the form of a photon.

The energy of this photon is given by the difference between the energy levels of the initial and final states of the electron. In this case, the electron transitions from a state with energy 3.89 eV to a state with energy 1.44 eV. The energy released in this transition is: ΔE = E₂ - E₁ = 1.44 eV - 3.89 eV = -2.45 eV

Note that the negative sign indicates that energy is being released.
We can now use the relationship between energy and wavelength for a photon: E = hc/λ
where h is Planck's constant (6.626 x 10^-34 J s), c is the speed of light (2.998 x 10^8 m/s), and λ is the wavelength of the photon. Rearranging this equation to solve for λ, we get: λ = hc/E

Plugging in the values we know, we get:
λ = (6.626 x 10^-34 J s)(2.998 x 10^8 m/s)/(-2.45 eV x 1.602 x 10^-19 J/eV)
Note that we converted electron volts (eV) to joules (J) using the conversion factor 1.602 x 10^-19 J/eV.
Simplifying this expression, we get: λ = 507 nm, Therefore, the wavelength of the photon emitted by the electron transition is 507 nm.

To know more about atom click here

brainly.com/question/13973654

#SPJ11

Energetic molecules such as NADH and ATP are often reactants of exergonic reactions.

Exergonic reactions are those that discharge energy and have a harmful Gibbs-free energy change. In these reactions, the reactants have more free energy than the products, so the excess energy is cast in the state of heat. An exergonic reaction is a chemical reaction where the shift in the free energy is negative.

Energetic molecules like NADH and ATP store energy in their chemical adhesives, which can be emitted in exergonic reactions to drive endergonic responses that need energy input. Therefore, they are usually employed as reactants in exergonic reactions.

To learn more about Exergonic reactions

https://brainly.com/question/30800156

#SPJ4

The incorrect statement for entropy is the entropy is larger when a dissolved salt in a liquid is uniform or spread throughout the liquid than when it is highly concentration in a small portion of the liquid. The answer to this question is A..

For more information on entropy kindly visit to

https://brainly.com/question/15025401

#SPJ1

The concentration in molarity of the solution is 2.72 M.

To calculate the molarity of the solution, we need to first calculate the number of moles of KOH present in the solution.

Next, we need to calculate the volume of the solution in liters.

Finally, we can calculate the molarity of the solution using the formula:

Therefore, the concentration in molarity of the solution made by dissolving 20.0 grams of KOH in 150.0 mL of H2O is 2.72 M.

To learn more about molarity of the solution, here

https://brainly.com/question/16587536

#SPJ4

As a result, it is important to store NaOH in a dry and cool place, away from any sources of moisture or water.

NaOH, also known as sodium hydroxide, is a highly hygroscopic solid. This means that it can easily absorb moisture from its surroundings, including the air. When NaOH absorbs water, it can become more corrosive and potentially dangerous.

This is why it is also important to handle NaOH with care and wear appropriate protective gear, such as gloves and goggles. Additionally, any spills or leaks should be cleaned up immediately and properly disposed of according to local regulations.

By following these precautions, NaOH can be safely used in a variety of applications, including in the production of soap, paper, and textiles.

To learn more about : water

https://brainly.com/question/19491767

#SPJ11

The normal boiling point of methyl chloride, for a given data, is -23.8°C

The bubbling point (boiling point) of a compound is affected by numerous components, checking the quality of intermolecular powers between particles, the degree and shape of the particles, and the restraint of the particles.

When the alkyl bunches are supplanted with chlorine, the coming around compound has diverse intermolecular powers and restraints compared to the beginning compound. In common, particles with polar covalent bonds tend to have higher bubbling centers than nonpolar particles with comparable atomic weights.

Methyl chloride (CH3Cl) may be a polar molecule with a dipole scaled down due to the separation in electronegativity between carbon and chlorine. The quality of the dipole-dipole powers between particles of methyl chloride is more prominent than the quality of the van der Waals powers between particles of methane, which is the compound molded between two methyl bunches.

As a result, the bubbling point of methyl chloride is higher than the bubbling point of methane. The standard bubbling point of methane is -161.5°C, though the commonplace bubbling point of methyl chloride is -23.8°C.

In this way, the commonplace bubbling point of methyl chloride, the compound molded between the methyl collect and chlorine, is -23.8°C.

To know more about boiling point  refer to this:

https://brainly.com/question/40140

#SPJ4

A solution of hydrofluoric acid with a concentration of 0.236 M and a pKa of 3.15 is used to prepare a buffer with a pH of 3.773.

To prepare a buffer with a pH of 3.773, we can use the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

where pH is the desired pH of the buffer, pKa is the dissociation constant of hydrofluoric acid, [A-] is the concentration of the conjugate base (KF) and [HA] is the concentration of the acid (HF).

Rearranging the Henderson-Hasselbalch equation, we get:

[A-]/[HA] = [tex]10^(^p^H ^- ^p^K^a^)[/tex]

Substituting the given values, we get:

[A-]/[HA] = [tex]10^(^3^.^7^7^3^ - ^3^.^1^5^)[/tex] = 1.738

We also know that the total concentration of the buffer solution is the sum of the concentrations of the acid and the conjugate base:

[HA] + [A-] = 0.236 M

Solving these two equations simultaneously for [A-] and [HA], we get:

[A-] = 0.145 M

[HA] = 0.091 M

The molar mass of KF is 58.10 g/mol. To calculate the mass of KF required to make the buffer, we need to first calculate the number of moles of KF needed:

moles of KF = [A-] x volume of buffer

moles of KF = 0.145 x 2.00 = 0.290

Finally, we can calculate the mass of KF required:

mass of KF = moles of KF x molar mass of KF

mass of KF = 0.290 x 58.10 = 16.809 g

Therefore, 16.809 grams of solid potassium fluoride should be added to 2.00 L of a 0.236 M hydrofluoric acid solution to prepare a buffer with a pH of 3.773.

Learn more about Henderson-Hasselbalch equation

brainly.com/question/13423434

#SPJ11

A suspension is a heterogeneous mixture in which particles are dispersed throughout a liquid or gas medium, but they are large enough to eventually settle or separate over time due to gravity or other external forces. In contrast, a colloid is a type of mixture in which particles are dispersed evenly throughout a medium, but they are small enough to remain suspended indefinitely due to the Brownian motion of the surrounding liquid or gas molecules.

The particles in a suspension are usually much larger and heavier than those in a colloid, and they are not held in place by any sort of intermolecular or electrostatic forces. Therefore, they are more susceptible to settling or separating out of the mixture over time. In addition, the particles in a suspension can be easily separated from the liquid or gas medium by filtration or sedimentation, which is not possible with colloids.

On the other hand, the particles in a colloid are small enough to be affected by Brownian motion, which is the random movement of molecules in the surrounding liquid or gas. This constant movement keeps the particles in suspension, preventing them from settling or separating out of the mixture. Furthermore, colloids can exhibit some unique properties, such as Tyndall scattering or the ability to pass through a semipermeable membrane, that distinguish them from both solutions and suspensions.

The body is capable of producing all of the amino acids it need, but it must have enough energy to do so. False

The body is capable of producing some of the amino acids it needs, but there are nine essential amino acids that it cannot make and must be obtained from the diet. Histidine, isoleucine, leucine, lysine, methionine, phenylalanine, threonine, tryptophan, and valine are among the necessary amino acids.

The body also requires energy to synthesize non-essential amino acids, and if there is insufficient energy, the body may not be able to produce enough of these amino acids. Therefore, both dietary intake and energy availability are important for optimal amino acid production and overall health.

Learn more about amino acids

https://brainly.com/question/14583479

#SPJ4

The statement "The body is capable of manufacturing all of the amino acids it needs but it must have sufficient energy to be able to do so. " is False.

The body is capable of producing some of the amino acids it needs, but there are nine essential amino acids that it cannot make and must be obtained from the diet. These essential amino acids include histidine, isoleucine, leucine, lysine, methionine, phenylalanine, threonine, tryptophan, and valine.

The body also requires energy to synthesize non-essential amino acids, and if there is insufficient energy, the body may not be able to produce enough of these amino acids. Therefore, both dietary intake and energy availability are important for optimal amino acid production and overall health.

For more such questions on amino acids

https://brainly.com/question/30265108

#SPJ11