If a student had 28 moles of solid carbon would that be enough to produce 15 moles of C2H6

According to the kinetic molecular theory, gases are described by the following statement:

This statement highlights that gases are made up of particles that are in constant motion, moving in straight lines until they collide with another particle or the walls of the container.

The motion of gas particles is random, and their energy increases as the temperature of the gas increases. The kinetic molecular theory also suggests that the particles in a gas are far apart from each other and do not attract or repel each other, except during collisions.

Additionally, the kinetic molecular theory states that the pressure of a gas is caused by the collisions of gas particles with the walls of the container. The higher the concentration of gas particles or the faster they are moving, the greater the pressure of the gas.

Learn more about kinetic molecular theory at:

https://brainly.com/question/15451798

#SPJ1

Answer:

Explanation:

Limiting is HCl and excess is Ca(OH)2

excess is 296 grams Ca(OH)2

2 moles H2O will be formed

The IUPAC name for the compound given in the question is 2,3-dibromo-5-methylheptane

The IUPAC name for compound can be obtained by using the following steps:

Thus, the IUPAC name for the compound is: 2,3-dibromo-5-methylheptane

Learn more about IUPAC name:

https://brainly.com/question/23881815

#SPJ1

There are therefore a total of 14 atoms: 2 Al, 3 C, & 9 O. In other words, 3.5 moles of calcium carbonate will contain 3.5 moles if carbon because each mole of calcium carbonate has one mole of carbon.

Hence, 40.078 divided by 100.086 everything multiplied by 100% represents the mass percentage for calcium in calcium carbonate. This yields a value of almost 40%. Carbon's mass percentage is calculated by taking 12.011 and dividing it by 100.086, then multiplying that result by 100% to get a number of roughly 12 percent.

The subscripts (2 and 3) in this formula indicate how so many atoms will make up one unit of the molecule. There are two aluminium atoms and three oxygen atoms, respectively, denoted by the numbers 2 and 3.

To know more about carbonate visit:
https://brainly.com/question/22530423

#SPJ1

To determine the number of HCl molecules in 4.91 L of HCl acid at 25°C, we can use the following steps:

[tex]\qquad\sf {Density = \dfrac{mass}{volume}}[/tex]

[tex]\qquad\sf{mass = density \times volume}[/tex]

[tex]\qquad\sf{mass = 1.096 \: g/mL \times 4.91\: L = 5.38\: kg}[/tex]

Convert the mass of HCl acid to the number of moles using its molar mass. The molar mass of HCl is 36.46 g/mol.

[tex]\sf{moles = \dfrac{mass}{ molar\: mass} = \dfrac{5.38\: kg}{36.46\: g/mol} = 147.6\: mol}[/tex]

Use Avogadro's number to convert the number of moles of HCl to the number of HCl molecules. Avogadro's number is [tex]6.02 \times 10^23[/tex] molecules/mol.

[tex]\sf number\: of\: HCl\: molecules = moles \times Avogadro's\: number[/tex]

[tex]\begin{aligned}\sf number\: of\: HCl\: molecules& =\sf 147.6 \: mol \times 6.02 \times 10^23\: molecules/mol \\& =\sf 8.88 \times 10^25\: molecules\end{aligned}[/tex]

Therefore, there are [tex]8.88 \times 10^25[/tex] HCl molecules in 4.91 L of HCl acid at 25°C, assuming the density of the acid is 1.096 g/mL.

[tex]\rule{200pt}{5pt}[/tex]

Answer:

C. Energy is absorbed.

Explanation:

In an endothermic reaction, energy is absorbed from the surroundings, resulting in an increase in the internal energy of the system. This means that the products of the reaction have a higher energy content than the reactants, and energy is stored in the chemical bonds of the products.

Therefore, option C, energy absorption, occurs in an endothermic reaction.

The conclusion is the result of the experiment, which supports the hypothesis by stating that 100mL of water yielded the highest mass and height of plants.

Hypothesis: If a plant receives more water, it will grow more.

Independent Variable: Amount of water.

Conclusion: 100mL of water yielded the highest mass and height of plants.

In this experiment, Hypothesis states the relationship between the independent variable and the dependent variable. The independent variable is the amount of water, and the dependent variable is the growth of the plants.

The conclusion is the result of the experiment, which supports the hypothesis by stating that 100mL of water yielded the highest mass and height of plants.

To know more about water yield, visit:

https://brainly.com/question/16359786

#SPJ1

Answer:

1. The balanced equation is 2KCIO3 → 2KCI + 3O2. According to the law of conservation of mass, the mass of the reactants must equal the mass of the products. Therefore, the mass of oxygen produced is:

Mass of oxygen = Mass of KCIO3 - Mass of KCI

Mass of oxygen = 500 g - 303 g

Mass of oxygen = 197 g

Therefore, 197 g of O2 are produced.

2. The balanced equation is N2 + 3H2 → 2NH3. We need to find out how much H2 is needed to react with 100 g of N2 to produce 121 g of NH3. First, we need to calculate the number of moles of N2 and NH3:

Moles of N2 = Mass of N2 / Molar mass of N2

Moles of N2 = 100 g / 28 g/mol

Moles of N2 = 3.57 mol

Moles of NH3 = Mass of NH3 / Molar mass of NH3

Moles of NH3 = 121 g / 17 g/mol

Moles of NH3 = 7.12 mol

According to the balanced equation, 1 mole of N2 reacts with 3 moles of H2 to produce 2 moles of NH3. Therefore, the number of moles of H2 needed is:

Moles of H2 = Moles of N2 x (3/1)

Moles of H2 = 3.57 mol x 3

Moles of H2 = 10.71 mol

Finally, we can calculate the mass of H2 needed:

Mass of H2 = Moles of H2 x Molar mass of H2

Mass of H2 = 10.71 mol x 2 g/mol

Mass of H2 = 21.42 g

Therefore, 21.42 g of H2 are needed.

3. The balanced equation is 4Fe + 3O2 → 2Fe2O3. We need to find out how much oxygen is needed to react with 350 g of Fe to produce 500 g of Fe2O3. First, we need to calculate the number of moles of Fe and Fe2O3:

Moles of Fe = Mass of Fe / Molar mass of Fe

Moles of Fe = 350 g / 55.85 g/mol

Moles of Fe = 6.26 mol

Moles of Fe2O3 = Mass of Fe2O3 / Molar mass of Fe2O3

Moles of Fe2O3 = 500 g / 159.69 g/mol

Moles of Fe2O3 = 3.13 mol

According to the balanced equation, 4 moles of Fe react with 3 moles of O2 to produce 2 moles of Fe2O3. Therefore, the number of moles of O2 needed is:

Moles of O2 = Moles of Fe x (3/4)

Moles of O2 = 6.26 mol x (3/4)

Moles of O2 = 4.69 mol

Finally, we can calculate the mass of O2 needed:

Mass of O2 = Moles of O2 x Molar mass of O2

Mass of O2 = 4.69 mol x 32 g/mol

Mass of O2 = 150.08 g

Therefore, 150.08 g of O2 are needed.

4. The balanced equation is CH2 + 2O2 → CO2 + 2H2O. We know that 16 g of CH2 reacts with 64 g of O2 to produce 44 g of CO2. We need to find out how much water is produced. First, we need to calculate the number of moles of CH2 and CO2:

Moles of CH2 = Mass of CH2 / Molar mass of CH2

Moles of CH2 = 16 g / 14 g/mol

Moles of CH2 = 1.14 mol

Moles of CO2 = Mass of CO2 / Molar mass of CO2

Moles of CO2 = 44 g / 44 g/mol

Moles of CO2 = 1 mol

According to the balanced equation, 1 mole of CH2 reacts with 2 moles of O2 to produce 2 moles of H2O. Therefore, the number of moles of H2O produced is:

Moles of H2O = Moles of CH2 x (2/1)

Moles of H2O = 1.14 mol x 2

Moles of H2O = 2.28 mol

Finally, we can calculate the mass of H2O produced:

Mass of H2O = Moles of H2O x Molar mass of H2O

Mass of H2O = 2.28 mol x 18 g/mol

Mass of H2O = 41.04 g

Therefore, 41.04 g of H2O are produced.

5. The balanced equation is CaCO3 → CaO + CO2. We need to find out how much CO2 is produced from the decomposition of 200 g of CaCO3 if 112 g of CaO are produced. First, we need to calculate the number of moles of CaCO3 and CaO:

Moles of CaCO3 = Mass of CaCO3 / Molar mass of CaCO3

Moles of CaCO3 = 200 g / 100.09 g/mol

Moles of CaCO3 = 1.999 mol

Moles of CaO = Mass of CaO / Molar mass of CaO

Moles of CaO = 112 g / 56.08 g/mol

Moles of CaO = 1.999 mol

According to the balanced equation, 1 mole of CaCO3 produces 1 mole of CaO and 1 mole of CO2. Therefore, the number of moles of CO2 produced is:

Moles of CO2 = Moles of CaCO3 x (1/1)

Moles of CO2 = 1.999 mol

Finally, we can calculate the mass of CO2 produced:

Mass of CO2 = Moles of CO2 x Molar mass of CO2

Mass of CO2 = 1.999 mol x 44 g/mol

Mass of CO2 = 87.96 g

Therefore, 87.96 g of CO2 are produced.

Answer:

1. Atoms

Explanation:

The products and reactants of a chemical reaction are usually related in terms of their atoms and molecules. During a chemical reaction, atoms are rearranged to form new molecules, and these new molecules are the products of the reaction. However, the atoms themselves are not created or destroyed in the process.

For example, if we consider the combustion of methane (CH4) with oxygen (O2) to produce carbon dioxide (CO2) and water (H2O), the reactants (methane and oxygen) and the products (carbon dioxide and water) are all made up of the same types of atoms (carbon, hydrogen, and oxygen), but they are rearranged in different ways. The chemical properties of the reactants and products may differ, but they are still related in terms of their atomic and molecular composition.

It's difficult though to say which is more likely between atoms and molecules because they are both essential components of chemical reactions. In a chemical reaction, atoms combine to form molecules or break apart from molecules to form new molecules. Therefore, both atoms and molecules are important in a chemical reaction.

However, if we had to choose one that is more likely to be common between the reactants and products, it would probably be atoms. This is because in most chemical reactions, the atoms involved in the reactants are rearranged to form the products. The chemical reaction simply involves the rearrangement of the atoms, but the atoms themselves are not created or destroyed

On the other hand, molecules may change significantly during a chemical reaction, as they are made up of specific arrangements of atoms. The chemical properties of the reactants and products may also differ because of changes in the molecular structure. Therefore, while molecules are still an essential part of chemical reactions, it is more likely that atoms will be common between the reactants and products.

1. Its renewable nature,

2. Its potential to reduce greenhouse gas emissions and dependence on fossil fuels, and

3. Its ability to provide local sources of energy.

1. The high cost of production and transportation

2. The potential for deforestation and habitat loss

3. The release of pollutants and greenhouse gases during combustion

1. its low emissions and high efficiency,

2. its reliability and consistency,  

3. its potential for use in remote areas.

1. the high upfront cost of installation,

2. the potential for depletion of geothermal reservoirs,

3. the risk of earthquakes and other geological hazards.

The history of hydroelectric power dates back to the 19th century, with the development of water turbines and generators. The first hydroelectric power plant was built in Appleton, Wisconsin in 1882, by a man named H.J. Rogers.

However, the concept of using water to produce mechanical power had been around for centuries. In ancient times, waterwheels were used to power mills and other machinery, and in the Middle Ages, water power was used to operate various devices, such as water pumps, sawmills, and hammers.

Learn about  hydroelectric power here https://brainly.com/question/786046

#SPJ1

Based οn the wοrds prοvided, a pοssible title fοr this sectiοn οf Sheila's nοtes cοuld be Mass.

In chemistry, prοperties οf matter refer tο the characteristics οr attributes that can be used tο describe and identify a substance. These prοperties can be divided intο twο categοries: physical prοperties and chemical prοperties.

Physical attributes are thοse that can be examined οr measured withοut changing the substance's makeup. Mass, vοlume, density, cοlοr, melting pοint, bοiling temperature, and sοlubility are examples οf physical qualities.

Chemical prοperties, οn the οther hand, describe hοw a substance interacts with οther substances tο prοduce new substances.

Understanding the prοperties οf matter is impοrtant in chemistry because it allοws scientists tο identify and classify different substances based οn their unique characteristics. This knοwledge can alsο be used tο predict hοw substances will behave under different cοnditiοns and tο design new materials with specific prοperties fοr variοus applicatiοns.

To learn more about Density, visit:

https://brainly.com/question/26364788

#SPJ1

Complete question:

Sheila spilled tea on her notes and is now unable to read some words.

What is the correct title for this section of Sheila’s notes?

Answer:

25.3%

Explanation:

Since

Ca has just 1 mole

Ca ×1 = 40.08

C has 4 moles

C×4 = 48.04

H has 6 moles

H×6 = 6.06

O has 4 moles

O×4 = 64

64+6.06+48.04+40.08=158 (approx.)

40.08÷158 ×100% = 25.3%

An example of solar energy being used in the U.S is in the heating of swimming pools, and powering of cabins in off grid regions.

14. Using hydrogen as a fuel source involves using it as a primary energy carrier to power vehicles or generate electricity. It can be combined with oxygen to create water, producing energy in the process. The process of using hydrogen as a fuel source is known as hydrogen fuel cell technology, which involves the conversion of chemical energy into electrical energy.

15. Hydrogen is the most abundant element in the universe but is rarely found in its pure form on Earth. It is usually found in combination with other elements such as oxygen in water, carbon in hydrocarbons, and nitrogen in ammonia. Hydrogen can be extracted from water, natural gas, coal, and biomass through various methods such as steam-methane reforming, electrolysis, and biomass gasification.

16. Advantages of using hydrogen as a fuel source include:

Disadvantages of using hydrogen as a fuel source include:

17. A fuel cell is an electrochemical device that converts chemical energy into electrical energy through a chemical reaction between hydrogen and oxygen. It consists of an anode, a cathode, and an electrolyte, with the hydrogen fuel entering the anode and the oxygen entering the cathode. The hydrogen molecules are split into protons and electrons, with the protons passing through the electrolyte and the electrons flowing through an external circuit, generating electricity. The oxygen combines with the protons and electrons at the cathode, producing water as the only byproduct.

18. Solar energy is a form of renewable energy that is derived from the sun's radiation. It is harnessed through various technologies such as photovoltaics, solar thermal systems, and concentrated solar power to generate electricity, heat water, and power homes and businesses.

19. A solar cell is a semiconductor device that converts sunlight directly into electricity through the photovoltaic effect. It is made of a thin layer of a semiconductor material such as silicon that is treated with impurities to create a p-n junction. When sunlight strikes the cell, it creates an electric field that separates the positively charged holes and negatively charged electrons, generating an electric current.

20. Advantages of using solar energy include:

Disadvantages of using solar energy include:

21. An example of solar energy being used in the U.S is in the heating of swimming pools, and powering of cabins in off grid regions.

For each problem:

Problem 1:

Let x be the mass of the 15% solution needed and y be the mass of the 20% solution needed.

We have two equations:

x + y = 200 (total mass of the solution)

0.15x + 0.20y = 0.17(200) (total amount of solute in the solution)

Solving these equations:

x = 80 g (mass of 15% solution needed)

y = 120 g (mass of 20% solution needed)

Therefore, 80 g of 15% solution and 120 g of 20% solution need to be mixed to prepare 200 g of 17% solution.

Problem 2:

Let x be the mass of the 18% solution needed and y be the mass of the 5% solution needed.

We have two equations:

x + y = 300 (total mass of the solution)

0.18x + 0.05y = 0.07(300) (total amount of solute in the solution)

Solving these equations:

x = 120 g (mass of 18% solution needed)

y = 180 g (mass of 5% solution needed)

Therefore, 120 g of 18% solution and 180 g of 5% solution need to be mixed to prepare 300 g of 7% solution.

Problem 3:

Let x be the mass of the final solution.

The total amount of solute in the final solution is:

0.15(200 g) + 0.20(350 g) = 55 g + 70 g = 125 g

The total mass of the final solution is:

200 g + 350 g = 550 g

Therefore, the mass percentage of the final solution is:

(125 g / 550 g) x 100% = 22.7%

Problem 4:

Let x be the mass of the final solution.

The total amount of solute in the final solution is:

0.15(300 g) + 35 g = 80 g

The total mass of the final solution is:

300 g + 35 g = 335 g

Therefore, the mass percentage of the final solution is:

(80 g / 335 g) x 100% = 23.9%

Problem 5:

Let x be the mass of the final solution.

The total amount of solute in the final solution is:

0.25(400 g) = 100 g

The total mass of the final solution is:

400 g + 150 g = 550 g

Therefore, the mass percentage of the final solution is:

(100 g / 550 g) x 100% = 18.2%

Learn more on mass percentage here: https://brainly.com/question/4336659

#SPJ1

H+ (aq) + OH- (aq) → H2O (l)

Answer: There are 102,000,000 liters in the container.

Answer:

   A + B = AB is an example of a synthesis reaction

Explanation:

To hasten the solution process, we can choose the correct solvent for the solute, pulverize the solute to increase its surface area, increase the temperature of the solvent.

Effect of Solvent:

H2O = most soluble

alcohol = least soluble

glycerin = intermediate solubility

The salt is most soluble in water because salt is an ionic compound and water is a polar solvent. "Like dissolves like" means that substances with similar polarity and intermolecular forces tend to dissolve each other. Water is a polar solvent, meaning it has a partial positive charge on one end and a partial negative charge on the other, while salt is an ionic compound made up of positively and negatively charged ions. The partial charges on the water molecule can interact with the ions of salt, causing the salt to dissolve.

The choice of solvent affects the dissolving process because it determines the ability of the solvent to interact with the solute. Solvents that are similar in polarity and intermolecular forces to the solute tend to dissolve the solute more easily.

Effect of Pulverizing:

crystal = longest dissolving time

pulverized = shortest dissolving time

The dissolving rates are different because pulverizing the salt increases its surface area, exposing more salt to the solvent and allowing for a greater opportunity for the solute-solvent interactions to occur.

Effect of Temperature:

cold = longest dissolving time

hot = shortest dissolving time

Increasing the temperature of the solvent increases the kinetic energy of the solvent molecules, which leads to more frequent and energetic collisions with the solute particles, resulting in faster dissolving rates.

Effect of Stirring:

stirred = shorter dissolving time

unstirred = longer dissolving time

Stirring increases the rate of the dissolving process by helping to disperse the solute particles evenly throughout the solvent, increasing the surface area of the solute that is in contact with the solvent, and promoting the mixing of the solute and solvent.

Conclusions:

To hasten the solution process, we can choose the correct solvent for the solute, pulverize the solute to increase its surface area, increase the temperature of the solvent, and stir the solution to disperse the solute particles evenly throughout the solvent.

Learn more about solubility here

https://brainly.com/question/28170449

#SPJ1

In an aqueous solution of magnesium bromide, the solute is magnesium bromide and the solvent is water.

The solute in an aqueous solution of magnesium bromide is the solid material, in this case magnesium bromide, dissolved in a liquid, which is the solvent. In this case, the solvent is water. Water is an excellent solvent because of its ability to form hydrogen bonds with other molecules, which allows it to dissolve many different substances.

In addition, it is a polar molecule, meaning that one end of the molecule has a slightly positive charge while the other end has a slightly negative charge. This polarity allows water molecules to interact with molecules of other substances, including magnesium bromide, which is also a polar molecule, allowing it to dissolve in the water.

The interaction between the polar water molecules and the polar magnesium bromide molecules causes the magnesium bromide to break up into its component ions, forming a solution. The ions are then surrounded by water molecules, which keeps them in solution until the solution is evaporated.

Learn more about magnesium bromide here:

https://brainly.com/question/11050230

#SPJ1

Enthalpy change, H, for this reaction per mole of X is thus equal to 0 J/mol.

The amount of heat that the calorimeter, q cal, gains may be calculated using the formula qcal = Ccalt, where t is the change in temperature that the mixture experiences.

The equation: can be used to compute the enthalpy change, H.             ΔH = q / n

The heat absorbed by the water can be calculated using the equation:

q1 = m1 x c1 x ΔT1

m1 = 21.0 g = 0.0210 kg (since the density of water is 1.00 g/mL)

c1 = 4.18 J/(g⋅∘C)

ΔT1 = 25.0 ∘C - 13.5 ∘C = 11.5 ∘C

q1 = (0.0210 kg) x (4.18 J/(g⋅∘C)) x (11.5 ∘C) = 1.09 J

The heat absorbed by X can be calculated using the equation:

q2 = m2 x ΔHfus

where m2 is the mass of X and ΔHfus is the enthalpy of fusion of X.

m2 = 1.70 g = 0.00170 kg

ΔHfus = ΔH / n = ΔH / (m2/M)

where M is the molar mass of X.

We can rearrange this equation to solve for ΔH:  ΔH = q2 x (m2/M)

With this assumption, we can calculate ΔH as follows:

ΔH = q / n = (q1 + q2) / n

ΔH  = (1.09 J + q2) / (0.00170 kg / 77.0 g/mol)

ΔH  = (1.09 J + q2) / 0.0000221 mol

The fact that the heat absorbed by X is equal to the heat emitted by the solution can be used to solve for q2:  q2 = -q1

Therefore,  ΔH = (1.09 J - q1) / 0.0000221 mol

Substituting q1, we get:

ΔH = (1.09 J - 1.09 J) / 0.0000221 mol

ΔH = 0 J/mol

To know more about reaction visit:-

https://brainly.com/question/28984750

#SPJ9

Answer: A

Explanation:

You thought i was feeling you that n was a munch

Answer:

A. The complete balanced chemical equation, including phase labels, for the reaction is:

BaCl2 (aq) + K2O (aq) → BaO (s) + 2KCl (aq)

B. The type of reaction that has occurred is a double displacement or metathesis reaction. In this reaction, the barium cations (Ba2+) and potassium anions (K+) exchange partners, resulting in the formation of solid barium oxide (BaO) and aqueous potassium chloride (KCl).

C. The indicator that tells you a chemical reaction has occurred is the formation of a solid precipitate. In this reaction, the solid barium oxide (BaO) that forms is a clear indication that a chemical reaction has occurred. Additionally, the fact that the reactants are aqueous and the products include both a solid and an aqueous solution also indicates a chemical reaction has taken place.

Answer:

53.69 mg/m³

Explanation:

To calculate the concentration of ethyl acetate in milligrams per cubic meter, we need to know the total volume of the room and the amount of ethyl acetate that evaporated in grams.

The total volume of the room is:

V = l x w x h

V = 9.00 m x 6.00 m x 3.00 m

V = 162.00 cubic meters

To convert the amount of ethyl acetate evaporated from grams to milligrams, we multiply by 1000:

amount of ethyl acetate = 8.701 g = 8,701 mg

Now we can calculate the concentration of ethyl acetate in milligrams per cubic meter:

concentration = amount of ethyl acetate / volume of room

concentration = 8,701 mg / 162.00 cubic meters

concentration = 53.69 mg/m³

Therefore, the concentration of ethyl acetate in the unventilated room is 53.69 mg/m³.

Answer:

Nitrogen liquefies at -195.8°C at room temperature.

At -182.95°C, the periodic table equivalent (oxygen) boils.

The boiling point of nitrogen is lower because there are fewer interactions between nitrogen molecules (N2).

The degree of electron fluctuation within a molecule affects interactions between non-polar molecules.

Van der Waals forces are the oldest sort of intermolecular contact, named after Dutch chemist Johannes van der Waals.

The Van der Waals forces, which include dipole-dipole and dispersion forces, are the weakest intermolecular forces.

Well, us human being rely on [tex]o_{2}[/tex] (oxygen). We human beings breathe this in every day because we need it to survive. This is a good example because it explains how humans don't see [tex]o_{2}[/tex] but use it every day.

The emission spectrum of copper can be seen from the spectrum C

An emission spectrum is the pattern of wavelengths of electromagnetic radiation emitted by a substance when it is excited by heat, electricity, or some other energy source. Each element, molecule, or compound has a unique emission spectrum, which can be used to identify it or to study its physical and chemical properties.

The emission spectrum is produced when electrons in the atoms or molecules are excited to higher energy levels, and then return to their ground state by releasing energy in the form of photons. The energy of each photon corresponds to a specific wavelength, and the collective emission of all the photons produces a characteristic pattern of bright lines or bands in the electromagnetic spectrum.

Learn more about emission spectrum:https://brainly.com/question/27268130

#SPJ1

Answer:

The key difference between aluminum and magnesium is that the aluminum is a corrosion resistant metal whereas magnesium is not. Magnesium and aluminum are two chemical elements that we can categorize as metals in the periodic table. Both are naturally occurring metals in different mineral forms.

Explanation:

The total number of moles of reactants and products in the chemical reaction given is 9 moles

The total number of mole of reactants and products in the chemical reaction can be obtained as follow:

2H₂S + 3O₂ -> 2H₂O + 2SO₂

The following were obtained from the above equation:

Total number of mole = Mole of reactants + mole of products

Total number of mole = 5 mole + 4 moles

Total number of mole = 9 moles

Thus, we can say that the total number of mole is 9 moles

Learn more about mole:

https://brainly.com/question/13314627

#SPJ1