If a user's computer becomes infected with a botnet, this compromise can allow the attacker to:
1. Conduct a Distributed Denial of Service (DDoS) attack - A DDoS attack happens when several systems flood a target with traffic, overloading it and rendering it inaccessible to consumers.
2. Connect to a Command and Control server - The attacker can use an infected computer to connect to a Command and Control server, which is used to transmit instructions to the botnet and receive data from infected devices.
3. Launch a mass-mail spam attack - The attacker can use the compromised machine to send out enormous numbers of spam emails to unsuspecting recipients, frequently including malware or phishing links.
Tailgating (option 4) is not a botnet compromise since it is a physical security breach in which an unauthorized person gets entry to a protected place by following an authorized individual.
Learn more about botnet attacks:
https://brainly.com/question/6297459
#SPJ11
15 POINTS
Which statement best describes what hardware is?
the electronic and mechanical parts of a computer device
the components that receive data from a computer
the electronic circuitry that executes instructions
the components that transform data into human-readable form
Answer:
A
Explanation:
The first statement "the electronic and mechanical parts of a computer device" best describes what hardware is.
Hardware refers to the physical components of a computer system, such as the motherboard, CPU, RAM, hard drive, and peripherals like the keyboard and mouse. These components are made up of electronic and mechanical parts that work together to receive, process, store, and output data.
leave a comment
most of the visibility problems that occur at airports, which can suspend flights and even close airports, are caused by
fog is the reason which causes Most of the visibility problems that occur at airports, which can suspend flights and even close airports.
Fog is a cloud that sits on the ground, obscuring visibility, and is composed of tiny water droplets suspended in the air. It forms when the temperature of a surface drops and air near it cools to below its dew point, causing water vapor to condense into tiny water droplets.
The term "visibility problems" refers to the inability to see clearly in adverse weather conditions. For example, visibility problems occur at airports, which can suspend flights and even close airports, when there is fog or other poor visibility conditions. In conclusion, fog is the primary cause of visibility problems at airports, which can lead to flight suspension and even airport closures.
To know more about fog: https://brainly.com/question/14381285
#SPJ11
what new feature in server 2016 provides a light-weight server geared toward use on virtual machines?
The new feature in Server 2016 that provides a light-weight server geared toward use on virtual machines is called "Nano Server".
Nano Server is a minimalistic version of Windows Server 2016 that is designed specifically for running cloud-based applications and optimized for use in virtualized and containerized environments. It is a lightweight and low-maintenance option that can be used to run Hyper-V clusters, scale-out file servers, and other cloud-based workloads.
Nano Server has a smaller footprint than other versions of Windows Server 2016, with no GUI or local logon capability. This makes it more secure and easier to manage remotely. Nano Server is also designed to be updated and managed using remote management tools like PowerShell, Windows Management Instrumentation (WMI), and Desired State Configuration (DSC).
Learn more about Nano Server
https://brainly.com/question/28282755
#SPJ11
Which type of IP address is used within a private network (LAN)? (5 points)
Network
Private
Public IP
VPN
Explanation:
A private IP address is used within a private network to connect securely to other devices within that same network
90.7% complete question which of the following conditions are results of a syn (synchronize) flood attack? (Select all that apply.)A. Packet filteringB. Resource exhaustionC. Denial of service (DoS)D. Amplification
The following conditions are the result of a syn (synchronize) flood attack: Denial of service (DoS), Packet filtering, and Resource exhaustion.
What is a flood attack?A flood attack is a type of cyberattack that aims to incapacitate a network or web server by overwhelming it with a large volume of traffic. It is one of the most common types of cyberattacks, and it is commonly used to execute Denial of Service (DoS) assaults on target systems, resulting in resource exhaustion and eventual failure.
The attacker directs a large number of SYN packets to the target in an SYN flood attack. The aim of these attacks is to clog up a network or server's processing capacity by forcing it to synchronize with a high volume of requests. This effectively renders the target system unavailable, causing the user to experience resource exhaustion and eventual failure. The condition of packet filtering is also the result of a syn flood attack.
Learn more about SYN flood attacks:
https://brainly.com/question/28279445
#SPJ11
You want to scan a variety of family history documents and photos, many of which are very large. There are also some family history books that you need to scan.
Which of the follow scanners will MOST likely meet your scanning needs?
Flatbed scanner
The type of scanner that is most likely to meet the scanning needs of someone who wants to scan a variety of family history documents and photos, many of which are very large is a Flatbed scanner.
A flatbed scanner is a kind of scanner that uses a flat glass plate and a movable scanning head to make high-resolution digital scans of photos, documents, and other flat objects.
A flatbed scanner can scan photos, documents, books, and other flat objects with a high level of detail and resolution. It has a larger scanning area than other scanners, allowing you to scan larger documents and books.
It also has high color accuracy, allowing you to produce high-quality reproductions of your family history documents and photos. Thus, a Flatbed scanner is an ideal scanner for scanning family history books and photos.
drum scanner,
flatbed, and
handheld scanners.
Among these scanners flatbed scanner is most likely meet the scanning needs.
To know more about Flatbed scanner:https://brainly.com/question/983715
#SPJ11
(int)('a' + Math.random() * ('z' - 'a' + 1)) returns a random number __________.A. between 0 and (int)'z'B. between (int)'a' and (int)'z'C. between 'a' and 'z'D. between 'a' and 'y'
Correct answer is option B. The expresion return a value between (int)'a' and (int)'z'.
Break down this expression furtherThe expresion returns a random integer number between the ASCII codes for the lowercase letters 'a' and 'z', which is (int)'a' and (int)'z' respectively. (int) will convert a number into an integer and Math.random() will generate a random number between 0 and 1. The expression is then multiplied by the difference between (int)'z' and (int)'a' + 1. The resulting expression will be a random number between (int)'a' and (int)'z'.Java code:import java.lang.Math;
public class Main {
public static void main(String[] args) {
int res = (int)('a' + Math.random() * ('z' - 'a' + 1));
System.out.println("Generated random num between: ");
System.out.println("(int)'a': " + (int)'a');
System.out.println("(int)'z': " + (int)'z');
System.out.println("Is: " + res);
}
}
For more information on Random integer in Java methods see: https://brainly.com/question/30079584
#SPJ11
if you want to create a click-to-call feature in your mobile site for smartphone users, which protocol should you use to create a phone link
The protocol you should use to create a click-to-call feature for smartphone users on a mobile site is called tel.
The tel protocol is used to create a link on a web page that will trigger a phone call when tapped or clicked on by a user. When a user clicks on the tel: link, their phone will prompt them to dial a specific phone number. To create a tel: link, you need to include the phone number in the link, like this: 555-123-4567. This link will create a click-to-call feature that will initiate a phone call to the number when clicked. By using the tel: protocol, you can make it easy for mobile users to contact you with a simple tap of the screen.
You can learn more about protocol at: brainly.com/question/27581708
#SPJ11
key performance indicators (kpis) are a more defined target for your team to track progress towards objectives. if your objective is to increase link clicks by 20% on linkedin, what should be the corresponding kpi?
The "Click-through Rate" (CTR) for the LinkedIn articles might be the equivalent KPI for the goal to increase link clicks by 20% on LinkedIn.
What KPI measurements are used to LinkedIn?A LinkedIn KPI or metric is a measurement tool used in company pages and individual profiles to track and measure their effect through particular goals, be it engagement, reaching out, or creating relationships with as many people as they can in their particular field.
The KPI click-through rate is what.The key performance indicator (KPI) known as click-through rate (or CTR for short) is used in search engine optimization and other marketing channels like email to calculate the proportion of clicks to impressions or views of a link.
To know more about LinkedIn visit:-
https://brainly.com/question/14331694
#SPJ1
what specific windows defender policy setting will allow you to disable scanning and real-time protection for specific files or all files in specified folders?
Answer:here is the answer below
Explanation: The specific Windows Defender policy setting that allows you to disable scanning and real-time protection for specific files or all files in specified folders is called "Exclude files and folders from scanning" policy. This policy setting can be found in the Windows Defender Antivirus policy, which is located in the Group Policy Editor under Computer Configuration > Administrative Templates > Windows Components > Microsoft Defender Antivirus > Scan.
When you enable this policy and specify the files or folders to exclude, Windows Defender Antivirus will not scan those files or folders for threats and will not provide real-time protection for them. This can be useful in situations where you have files or folders that are known to be safe and you don't want them to be scanned unnecessarily, or if you have a particular application that requires exclusion from scanning to function properly.
abigail needs to move out of state to take care of her mother. she will need secure remote access to continue working as a cloud engineer. what type of connection does abigail need to securely access the computing resources at her company?
Abigail will need a Virtual Private Network (VPN) connection to securely access the computing resources at her company.
A VPN connection allows remote users to securely access a private network over the public internet. With a VPN connection, Abigail can connect to her company's network from her remote location as if she were physically present in the office.
The VPN connection creates a secure and encrypted tunnel between Abigail's computer and the company's network, protecting her communications and data from unauthorized access. This ensures that Abigail can securely access the company's computing resources, such as servers, applications, and databases, without exposing them to potential security risks on the public internet.
Overall, a VPN connection is a secure and reliable way for remote workers to access corporate resources from a remote location.
Learn more about VPN here brainly.com/question/29432190
#SPJ4
lisa is shopping for a pc that she can take with her to school. she would like a portable pc with a usb port so that she can plug in external devices. which computer fits lisa's computer needs? select your answer, then click done.
Lisa's computer needs can be met by purchasing a laptop with a USB port. This type of computer is portable and can be taken with her to school, and the USB port will allow her to plug in external devices such as a keyboard, mouse, external hard drive, etc.
When shopping for a laptop, it is important to consider the type of processor, RAM, storage, and display. Processors can range from the budget-friendly Celeron and Pentium to the more powerful Core i3, i5, and i7 models. RAM and storage size will vary by model, but it is important to get enough RAM to handle multitasking and enough storage space to store documents, photos, music, and videos.
When considering the display, a larger display will make it easier to see what is on the screen, but it will also make the laptop heavier and more difficult to transport. It is also important to consider the brand and quality of the laptop, as well as warranty and customer service options.
In addition, there are many accessories that can be purchased to enhance the laptop's performance and usability, such as a carrying case, mouse, external hard drive, and more. Other options including Supercomputer, personal computer, and microcomputer are incorrect. The best type of computer containing all desired features is Laptop.
You can learn more about computers at: brainly.com/question/13027206
#SPJ11
lattice-based access control specifies the level of access each subject has to each object, if any. question 2 options: true false
The given statement, "lattice-based access control specifies the level of access each subject has to each object if any" is true.
Lattice-based access control refers to a security policy that restricts access control to a set of pre-defined policies. In the field of computer security, this is often used as a formalism for defining and enforcing a security policy.
It is a well-known and well-regarded theory that is widely utilized in access control policies for information systems. The lattice model is based on two main components: security levels and clearance levels.
The security levels refer to the relative security requirements of various components of the system, while clearance levels refer to the authorization levels of various users.
Both security levels and clearance levels are organized into a lattice structure, with the most restrictive level at the top and the least restrictive level at the bottom.
In this structure, each object has an assigned security level, and each subject has an assigned clearance level. Each subject may access any object whose security level is equal to or less restrictive than the subject's clearance level.
Therefore, the statement "lattice-based access control specifies the level of access each subject has to each object if any" is true.
To learn more about Lattice-based access control: https://brainly.com/question/28288408
#SPJ11
write an if/else statement that compares age with 18, adds 1 to adults if age is greater than or equal to 18 , and adds 1 to minors otherwise.
Here is an example if/else statement in Python that compares age with 18, adds 1 to the variable "adults" if age is greater than or equal to 18, and adds 1 to the variable "minors" otherwise:
if age >= 18: adults += 1else: minors += 1In computer programming, an if/else statement is a control structure that allows the program to make a decision based on a condition. The condition is evaluated as either True or False and depending on the result, the program executes one of two code blocks: the if block or the else block.In this code snippet, the variable "age" represents the age of the person being checked, while the variables "adults" and "minors" represent the number of adults and minors, respectively. The "+=" operator is used to increment the value of these variables by 1.Learn more about the if/else statement:https://brainly.com/question/18736215
#SPJ11
what is the most common topology and technology combination in use today? a.logical bus / ethernet b.switched / ethernet c.logical ring / token ring d.logical bus / wireless lan
The most common topology and technology combination in use today is switched/Ethernet. So, the correct option is B.
Ethernet is a networking technology that allows devices to communicate with one another. It's a wired networking standard that is frequently used in local area networks (LANs). Ethernet is the most widely used networking technology. A switched network, on the other hand, is a network that uses switches to connect devices together.
The most common topology and technology combination in use today is switched/Ethernet. This is because it is a widely used networking technology that is commonly found in LANs, and it is also reliable and efficient. A switched network uses switches to connect devices together, which makes it more efficient than other types of networks, such as a bus or a ring.
Furthermore, Ethernet is widely used because it is simple to use, easy to install, and cost-effective. Switched networks are often used in enterprise environments, where they are used to connect multiple devices together in a single network.
You can learn more about Ethernet at: brainly.com/question/18579101
#SPJ11
which ieee 802.11 phy technology specifies an 80 mhz wide channel for transmitting and receiving data?
The IEEE 802.11ac PHY technology specifies an 80 MHz wide channel for transmitting and receiving data.
IEEE 802.11 PHY (Physical Layer) technology is a Wireless LAN (WLAN) networking protocol that enables Wi-Fi-enabled devices to connect to the internet.
The IEEE 802.11 PHY layer specifies the radio signal transmission characteristics that are used to transfer data between devices. PHY 802.11 standards specify that the protocol for wireless networks should operate in the 2.4 GHz or 5 GHz frequency ranges. It uses various transmission schemes such as direct-sequence spread spectrum (DSSS), frequency-hopping spread spectrum (FHSS), and orthogonal frequency-division multiplexing (OFDM).802.11ac PHY Technology IEEE 802.11ac is the latest and most advanced wireless networking standard to date. The standard is capable of providing high-speed data transmission using a minimum of four multiple-in/multiple-out (MIMO) spatial streams. This standard provides more channels and wider bandwidths, enabling data transmission rates of over one gigabit per second (Gbps) to be achieved. The IEEE 802.11ac PHY technology specifies an 80 MHz wide channel for transmitting and receiving data.Learn more about technology visit:
https://brainly.com/question/28026334
#SPJ11
if the stack has room enough for 4 elements, can the program possibly handle an expression of 10 characters?
In this scenario, the stack has a maximum capacity of 4 elements, which means that it can only hold 4 values at any given time.
However, an expression with 10 characters would require more than 4 elements to be evaluated, which means that the stack would not be able to handle the expression.
In programming, a stack is a data structure that allows for the storage and retrieval of data in a specific order. A stack typically has a fixed size or maximum capacity, and it can only hold a certain number of elements at a time.
Learn more about programming:
https://brainly.com/question/26134656
#SPJ11
what is the this keyword used to reference? the this keyword references the method that was called. the this keyword references the current class. the this keyword references the object that called the method. the this keyword references the instance variable that a local variable shadows.
Answer:
The "This Key"
Explanation:
This is how we reference it because it normally helps any confusion. (I might be wrong)
The "this" keyword in object-oriented programming refers to the current object or instance of a class. It is a reference to the object that the method was called on or the object that is currently being constructed. Therefore, the final answer is that the this keyword references the object that the method was called on.
When used within an instance method or constructor of a class, the this keyword is used to refer to the current object, i.e., the object on which the method or constructor is being invoked. This can be useful, for example, when there is a need to distinguish between an instance variable and a local variable that has the same name. Therefore, the correct answer to the question is: "The this keyword references the object that the method was called on."
Learn more about Programming: brainly.com/question/23275071
#SPJ11
Car batteries have two terminals, which are _____.
Answer: Positive and negative
Explanation:
A car batter works just like a 9 volt battery but it gives off more power and has a different structure .
which software forensic tool offers blade, hstex, and netanalysis.blade, is a windows-based data recovery solution, and supports plug-ins that give it advanced data recovery and analysis capabilities?
Blade, hstex, and netanalysis are available through the software forensic tool. Digital Detective, a windows-based data recovery programme, enables plug-ins that enhance its superior data recovery and analysis abilities.
What are the options for data recovery?Restoring lost, damaged, inadvertently deleted, or otherwise inaccessible data to a server, computer, mobile device, or storage device is known as enterprise data recovery (or to a new device if the original device no longer works).Data loss is expensive, and data recovery is even more expensive. The sad consequence of data loss is the cost of data recovery. Yet one thing is certain: the cost of losing data is much higher than the expense of recovering it. A business may have to shut down due to lost data. Cold, warm, and hot sites are the three main categories of disaster recovery locations that can be used.To learn more about data recovery, refer to:
https://brainly.com/question/30855570
Which of the following attacks targets the external software component that is a repository of both code and data?
Application program interface (API) attack
Device driver manipulation attack
Dynamic-link library (DLL) injection attack
OS REG attack
The attack that targets the external software component that is a repository of both code and data is the C: Dynamic-link library (DLL) injection attack.
A Dynamic-link library (DLL) injection attack is a type of cyber attack that targets external software components known as DLLs, which are repositories of code and data that are shared among different programs. The attack involves injecting malicious code into the DLLs, which can then be executed whenever the DLL is loaded into memory. This type of attack can be used to take control of a system or steal sensitive information.
DLL injection attacks are particularly effective because they can bypass traditional security measures, such as firewalls and antivirus software. To prevent these attacks, it is essential to implement security measures that detect and block unauthorized DLL injections.
You can learn more about Dynamic-link library (DLL) injection attack at
https://brainly.com/question/15223070
#SPJ11
If you add a slideshow to play as your desktop theme, you have customized your system softwarea. Trueb. False
The statement given "If you add a slideshow to play as your desktop theme, you have customized your system software" is true because by adding a slideshow to play as your desktop theme, you are customizing the system software, which is the operating system.
The desktop theme is a visual feature of the operating system, and customizing it is a way of personalizing the user experience. System software is responsible for managing the computer's resources, including hardware, software, and data. Examples of system software include operating systems, device drivers, and utility programs.
You can learn more about operating system at
https://brainly.com/question/22811693
#SPJ11
6 how many bits per baud can we send in each of the following cases if the signal constellation has one of the following number of points? a. 2 b. 4 c. 16 d. 1024
The number of bits per baud that can be sent in each of the following cases is determined by the number of points in the signal constellation. a. For a constellation with 2 points, there is 1 bit per baud. b. For a constellation with 4 points, there are 2 bits per baud. c. For a constellation with 16 points, there are 4 bits per baud. d. For a constellation with 1024 points, there are 10 bits per baud.
Each point in the constellation represents a unique symbol that can be transmitted. The number of bits per baud is equal to the base-2 logarithm of the number of points in the constellation.
If the signal constellation has 2 points, then each baud can send 1 bit of information.
If the signal constellation has 4 points, then each baud can send 2 bits of information.
If the signal constellation has 16 points, then each baud can send 4 bits of information.
Finally, if the signal constellation has 1024 points, then each baud can send 10 bits of information.
To sum up, the number of bits per baud that can be sent in each of the following cases is determined by the number of points in the signal constellation: 1 bit for 2 points, 2 bits for 4 points, 4 bits for 16 points, and 10 bits for 1024 points.
Learn more about digital communication systems and signal constellations:https://brainly.com/question/13171893
#SPJ11
which command would create a zip file containing the files holiday.tif and desc.txt and compress it as much as possible?
To create a zip file containing the files holiday.tif and desc.txt and compress it as much as possible, you can use the following command: zip -9 archive.zip holiday.tif desc.txt
Here, the command is "zip" and the options used with the command are "-9" and "-r". The "-9" option compresses the files as much as possible, and the "-r" option compresses the files recursively.
You can also use the following command to create a zip file containing the files holiday.tif and desc.txt and compress it as much as possible: zip -9 archive.zip holiday.tif desc.txtHere, the command is "zip" and the option used with the command is "-9", which compresses the files as much as possible.
The "archive.zip" is the name of the zip file that you want to create, and "holiday.tif" and "desc.txt" are the names of the files that you want to include in the zip file.
To know more about the Zip file: https://brainly.com/question/7148812
#SPJ11
to increase security of data stored on an rodc, what can be configured to specify domain objects that aren't replicated to rodcs?
To increase the security of data stored on an RODC, the domain objects that are not replicated to RODCs can be configured. This can be achieved by specifying domain objects that are not replicated to RODCs.
A read-only domain controller (RODC) is a domain controller that stores a copy of an Active Directory database. An RODC is usually used in locations where network security is poor or non-existent. This ensures that even if the RODC is compromised, the security of the entire network is not jeopardized.
Active Directory consists of the following types of domain controllers:
Domain controllers that are read-write (RWDC)Domain controllers that are read-only (RODC)RODCs are used to secure remote sites, such as branch offices or retail stores, that have low physical security or inadequate network infrastructure.An RODC is a new category of the domain controller that has been introduced to improve security at remote locations. The primary function of an RODC is to cache user passwords. The use of an RODC will not be able to modify user passwords, computer accounts, or domain metadata stored on RWDCs to ensure that the RODC is secure.
You can learn more about RODC at: brainly.com/question/29585813
#SPJ11
indicate to which category the characteristic of the ip protocol belongs. you will only type the alphacharacter in the canvas textbox. category a. connectionless b. best-effort delivery c. media independent
The characteristic of the IP Protocol belongs to category A, Connectionless.
Connectionless means that each packet is transmitted independently and can take any path to reach the destination. This type of service is unreliable as there is no guarantee that all packets will reach the destination in the same order they were sent. Additionally, no handshaking is done between the source and destination which means that there is no end-to-end communication control.
IP Protocol is designed to provide a best-effort delivery, meaning that the network does not take responsibility for packet delivery. The responsibility lies with the sender to ensure the successful delivery of the packet, however, the network will try to send the packet. The packets may be reordered or dropped by the network and there is no guarantee that the packet will reach its destination.
IP Protocol is also media independent, meaning that it is capable of running on different physical layer technologies such as Ethernet, WiFi, or cellular. The IP layer handles any conversion needed to communicate between different physical media. This makes it possible to communicate over different media types.
Learn more about IP Protocol:https://brainly.com/question/17820678
#SPJ11
which of the following is true about international style? a.) international style has symmetrical balance. b.) international style uses rigid typographic grids. c.) international style uses serif typefaces.
Among the given options, the only true statement about the international style is that it uses a rigid typographic grid (option b). The international style is a design movement that emerged in the 1920s and 1930s, characterized by simplicity, minimalism, and functionality.
It is often associated with architecture and industrial design, but it also influenced graphic design. In terms of graphic design, the international style is known for its use of sans-serif typefaces, asymmetrical layouts, and an emphasis on hierarchy and legibility. The use of a rigid typographic grid is also a common characteristic of the international style, as it helps to create a sense of order and consistency in the design. However, symmetrical balance is not a defining feature of the international style, and it often employs asymmetrical layouts for a more dynamic and modern look. Similarly, the international style typically favors sans-serif typefaces over serif typefaces.
Find out more about typographic grid
brainly.com/question/30550406
#SPJ4
what new feature in windows server 2016 will allow up to eight identical physical adapters on the host system to be configured as a team and mapped to a virtual switch?
The new feature in Windows Server 2016 that allows up to eight identical physical adapters on the host system to be configured as a team and mapped to a virtual switch is called NIC Teaming.
NIC stands for Network Interface Card. NIC Teaming allows you to bundle several physical network interfaces together to form a single logical interface that provides fault tolerance and high-speed links.
By configuring multiple physical adapters as a team, you can increase the network bandwidth and provide redundancy in case a network adapter fails.
Learn more about Windows Server:
https://brainly.com/question/30468027
#SPJ11
what are the potential issues with building redundancy?
While redundancy can improve reliability and availability, it also comes with potential issues. These include increased costs, added complexity, and the risk of cascading failures.
1. Increased Costs: Implementing redundancy often requires additional investment in equipment, infrastructure, and maintenance. This can lead to higher initial and ongoing expenses, which may not be affordable for all organizations.
2. Added Complexity: Introducing redundancy can make a system more complex to design, implement, and manage. This can result in additional training, support, and administration resources, potentially decreasing efficiency and productivity.
3. Cascading Failures: In some cases, redundant components may not function as expected, causing a cascading failure in the system. This can occur when a single point of failure triggers a series of subsequent failures in other components, potentially leading to a complete system breakdown.
4. Overconfidence: Relying on redundancy can create a false sense of security, causing organizations to neglect regular maintenance and system monitoring. This can lead to undetected issues that may eventually result in system failures.
5. Inefficient Resource Utilization: Redundancy can lead to underutilization of resources, as redundant components are often idle during normal system operation. This can result in wasted energy, space, and financial resources.
6)In summary, while redundancy can be beneficial in maintaining system reliability and availability, it is important to consider the potential issues associated with its implementation. Organizations should weigh the benefits and risks before implementing redundancy in their systems.
for more such question on complexity
https://brainly.com/question/31056965
#SPJ11
the general control area of systems development and program change does not have an impact on day-to-day transaction processing. a. true b. false
The given statement "The general control area of systems development and program change does not have an impact on day-to-day transaction processing." is FALSE.
What is a transaction in computer science?
A transaction is a program or function that reads or modifies data items in a database. A transaction is a discrete unit of work that can execute multiple operations on a database. Transactions ensure that a database system remains in a consistent state regardless of concurrent user access and data modification requests. Therefore, in the day-to-day transaction processing, systems development and program change have a significant impact.
Hence, the given statement "The general control area of systems development and program change does not have an impact on day-to-day transaction processing." is FALSE. This is because the changes to the system, such as updates and modifications, can change how a transaction is processed and how data is stored. Additionally, new programs and development can introduce new features to the system which can impact how transactions are processed.
Learn more about Day-to-day transaction here:
https://brainly.com/question/14395924
#SPJ11