It depends on what you meant by saying not visible. Of it is not visible by using accurate measuring equipment then I think so, but if you mean that all transparent water is drinkable, then no. Think about this. When you put salt in water, you can't see it but it is still there: if you taste the water you can tell that there's salt in there. Let's say that instead of salt there are some bacteria, or some other type of salt which is not appropriate to drink at high levels, such as nitrates. I personally wouldn't recommend drinking from any type.of water unless you are not sure about its purity
The last 4 miles in the activity series of metals are commonly referred to as the "coinage medals". Why would these metals be chosen over more active metals for the use in coins? Why do you think some more active metals, such as zinc or nickel, or sometimes used in coins?
Coinage metals, which typically include copper, silver, and gold, are chosen over more active metals for use in coins because they are less reactive and more resistant to corrosion.
This ensures durability and preserves the appearance of the coins. Some more active metals like zinc or nickel are sometimes used in coins due to their lower cost and availability, while still maintaining adequate resistance to corrosion and wear for everyday use.
The reason why the last 4 miles in the activity series of metals, which are gold, silver, platinum, and palladium, are commonly referred to as the "coinage medals" is because they are highly resistant to corrosion and have a low reactivity towards other chemicals, making them ideal for use in coins. These metals are also very rare and valuable, which adds to their appeal as a currency.
More active metals such as zinc or nickel are sometimes used in coins because they are more abundant and less expensive than the "coinage metals". However, these metals tend to be more reactive and therefore more prone to corrosion and other chemical reactions, which can affect the appearance and value of the coins over time. Additionally, the use of these metals in coins is often limited to lower denominations or commemorative coins, rather than as a standard currency.
Visit here to learn more about Coinage metals : https://brainly.com/question/6923524
#SPJ11
The "coinage metals" are typically gold, silver, copper, and platinum, which are the last 4 metals in the activity series. These metals are chosen over more active metals for use in coins because they are relatively unreactive and do not corrode easily, making them ideal for coins that need to be durable and long-lasting. Additionally, these metals have been historically valued and used as currency, making them culturally significant as well.
However, some more active metals such as zinc or nickel are sometimes used in coins because they are cheaper and more readily available than the coinage metals. These metals may be used as an alloy with the coinage metals to make coins more affordable, or they may be used as a substitute for the more expensive metals in lower denomination coins. However, these metals are not as durable as the coinage metals and may corrode more easily, leading to shorter lifespans for the coins.
To know more about "coinage metals":
https://brainly.com/question/6955271
#SPJ11
you are preparing a standard aqueous solution for analysis by measuring a property of the solution that is directly related to a solution's concentration. unknown to you, the volumetric flask that you are using to make the solution has some residual water in it from the last time it was used. what effect will this have on the measured property of this solution?
Fill the volumetric flask approximately two thirds full and mix. Carefully fill the flask to the mark etched on the neck of the flask. Use a wash bottle or medication dropper if necessary. Mix the solution wholly by using stoppering the flask securely and inverting it ten to twelve times.
Why volumetric flask is more appropriate to be used in the preparation of the standard solution?A volumetric flask is used when it is imperative to be aware of each precisely and accurately the quantity of the solution that is being prepared. Like volumetric pipets, volumetric flasks come in distinctive sizes, depending on the extent of the answer being prepared.
Firmly stopper the flask and invert multiple times (> 10) to make certain the solution is nicely mixed and homogeneous. When working with a solute that releases warmth or gas all through dissolution, you ought to additionally pause and pull out the stopper once or twice. Use flasks for preparing options only.
Learn more about volumetric flask here:
https://brainly.com/question/2088214#SPJ1nAt T = 1200º C the reaction: P.(g) + 2P2(8) has an equilibrium constant R, 0.612. Suppose the initial partial pressure of Pris 5.00 atm and that of P, is 2.00 atm. Calculate the re- action quotient, Q. and state whether the reaction proceeds to reactants or products.
Since Q (0) is less than the equilibrium constant R (0.612), the reaction will proceed in the forward direction, moving towards the formation of more products.
The reaction quotient, Q, is calculated using the formula Q = (PPr)^1 x (PP2)^2, where PPr and PP2 are the partial pressures of Pr and P2, respectively. Plugging in the given values, we get Q = (5.00)^1 x (2.00)^2 = 20.00 atm^2.
To determine the direction of the reaction, we compare the reaction quotient, Q, to the equilibrium constant, K. If Q < K, the reaction proceeds forward to products. If Q > K, the reaction proceeds backward to reactants. And if Q = K, the reaction is at equilibrium.
In this case, the equilibrium constant R = 0.612, which means the reaction strongly favors reactants. Since the reaction quotient Q is much larger than the equilibrium constant (Q > K), the reaction will proceed in the reverse direction towards reactants.
To answer your question, we'll first need to correct the given reaction. Assuming the correct reaction is P(g) + 2P₂(g) ⇌ P₃(g), we can proceed.
Given the initial partial pressures, P(P) = 5.00 atm and P(P₂) = 2.00 atm, and no P₃ is mentioned, so we assume P(P₃) = 0 atm initially.
To calculate the reaction quotient, Q, we'll use the expression: Q = [P₃]/([P] * [P₂]^2). Plugging in the initial values, we get:
Q = (0) / (5.00 * 2.00^2) = 0
Since Q (0) is less than the equilibrium constant R (0.612), the reaction will proceed in the forward direction, moving towards the formation of more products.
Visit here to learn more about equilibrium : https://brainly.com/question/4289021
#SPJ11
To calculate the reaction quotient Q and determine whether the reaction proceeds to reactants or products, we can follow these steps:
1. Write down the balanced chemical equation:
[tex]P (g) + 2 P2 (g) ⇌ 3 P (g)[/tex]
2. Given: T = 1200ºC, K = 0.612, initial partial pressure of P is 5.00 atm, and initial partial pressure of P2 is 2.00 atm.
3. Write down the expression for the reaction quotient, Q:
[tex]Q = [P]^3 / ([P] * [P2]^2)[/tex]
4. Plug in the initial partial pressures:
[tex]Q = (5.00)^3 / (5.00 * (2.00)^2) = 125 / 20 = 6.25[/tex]
Now we can compare Q to the equilibrium constant, K, to determine whether the reaction proceeds to reactants or products.
Since Q > K (6.25 > 0.612), the reaction will proceed towards the reactants to reach equilibrium.
To know more about reaction quotient Q :
https://brainly.com/question/9024475
#SPJ11
Calculate the freezing point and the boiling point of each of the following aqueous solutions. (Assume complete dissociation. Assume that water freezes at 0.00°C and boils at 1.86°C 100.000°C. K = 0.51°C Kb = molal molal a. 0.060 m MgCl2 T = °C T = °C b. 0.060 m FeCl3 T = °C To = °C
The freezing and boiling points of 0.060 m [tex]MgCl_2[/tex] are -0.33°C and 100.09 °C. 0.060 m [tex]FeCl_3[/tex] has the following freezing and boiling points of -0.44°C and 100.12 °C respectively.
Depression in the freezing point and elevation in the boiling point are colligative properties. Colligative properties refer to the properties that are dependent on the concentration of solute in the solution.
Depression in the freezing point is calculated as ΔT = [tex]ik_fm[/tex]
where ΔT is depression in the freezing point
i is the dissociation factor
[tex]k_f[/tex] is the freezing depression factor = 1.86°C kg/mol
m is the molality of the solution
So, depression in 0.060 m [tex]MgCl_2[/tex] is 3*1.86*0.06
( it has 3 as a dissociation factor as it breaks into 1 [tex]Mg^{2+[/tex] and 2 [tex]Cl^-[/tex] ions)
0 - freezing point = 0.33
freezing point = -0.33°C
So, depression in 0.060 m [tex]FeCl_3[/tex] is 4*1.86*0.06
( it has 4 as a dissociation factor as it breaks into 1 [tex]Fe^{3+[/tex] and 3 [tex]Cl^-[/tex] ions)
0 - freezing point = 0.44
freezing point = -0.44°C
Elevation in boiling point is calculated as ΔT = [tex]ik_bm[/tex]
where ΔT is Elevation in boiling point
i is the dissociation factor
[tex]k_b[/tex] is the boiling elevation factor = 0.51°C kg/mol
m is the molality of the solution
So, elevation in 0.060 m [tex]MgCl_2[/tex] is 3*0.51*0.06
( it has 3 as a dissociation factor as it breaks into 1 [tex]Mg^{2+[/tex] and 2 [tex]Cl^-[/tex] ions)
boiling point - 100 = 0.09
boiling point = 100.09 °C
So, elevation in 0.060 m [tex]FeCl_3[/tex] is 4*0.051*0.06
( it has 4 as a dissociation factor as it breaks into 1 [tex]Fe^{3+[/tex] and 3 [tex]Cl^-[/tex] ions)
boiling point - 100 = 0.12
boiling point = 100.12 °C
Learn more about Colligative Properties:
https://brainly.com/question/30575192
#SPJ4
which compounds used in this experiment should one be careful with when using a hot plate? 4-methylphenol and diethyl ether 2-methyl-2-propanol and sulfuric acid diethyl ether and tert-butanol 4-methylphenol and glacial acetic acid
One should be careful with diethyl ether and tert-butanol when using a hot plate as they have low flash points and can easily ignite.
It is important to take proper precautions such as using a well-ventilated area and avoiding any sources of ignition. Sulfuric acid and glacial acetic acid are also potentially dangerous as they are corrosive and can cause severe burns if they come into contact with skin. Propanol and butanol have higher flash points and are generally safer to use on a hot plate.
When using a hot plate in an experiment, one should be particularly careful with diethyl ether and tert-butanol. Diethyl ether is highly flammable and volatile, while tert-butanol (2-methyl-2-propanol) can generate flammable vapors when heated. These compounds pose a risk of fire or explosion if not handled properly.
To know more about acid click here
brainly.com/question/30686324
#SPJ11
how many grams of n2 are required to completely react with 3.03 grams of h2 for the following balanced chemical equation? A. 1.00 B. 6.00 C. 14.0 D. 28.0
The grams of N2 are required to completely react with 3.03 grams of H2 for the following balanced chemical equation is 14 g.
We may calculate the number of moles of H2 that will be used by dividing the amount of H2 that will be utilised by its molar mass. We may multiply that number by the molar mass of N2 to get how many grammes we should use. We can divide that mole quantity by 3 to determine how many moles of N2 the reaction will consume.
In the reaction 1 mole of N2 react with 3 mole of H2 and give 2 mole of NH3
mass of H2 = 3.03g
No of moles of H2 = 3.03g/2 gmol-1
= 1.51 mole
1.51 mole of H2 require N2 = (1/3)× 1.51 moles
= 0.50 mole N2
molar mass of N2 =28g/mol
Mass of N2 require = 0.50mole ×28g/mol
= 14g
Mass of N2 require = 14g.
Learn more about Number of grams:
https://brainly.com/question/28902645
#SPJ4
The answer is C. 14.0 grams of N2 are required to completely react with 3.03 grams of H2.
The balanced chemical equation is:
N2 + 3H2 -> 2NH3
From the equation, we can see that 1 mole of N2 reacts with 3 moles of H2 to produce 2 moles of NH3.
To find out how many grams of N2 are required to react with 3.03 grams of H2, we first need to convert 3.03 grams of H2 to moles:
moles of H2 = mass of H2 / molar mass of H2
moles of H2 = 3.03 / 2.016
moles of H2 = 1.505
Now, we can use the mole ratio from the balanced equation to find out how many moles of N2 are required to react with 1.505 moles of H2:
moles of N2 = (1.505 mol H2) / (3 mol H2/1 mol N2)
moles of N2 = 0.5017
Finally, we can convert moles of N2 to grams of N2:
mass of N2 = moles of N2 x molar mass of N2
mass of N2 = 0.5017 x 28.02
mass of N2 = 14.04
To learn more about balanced chemical equation click here
brainly.com/question/28294176
#SPJ11
A chemical reaction has a Q10 of 3. Which of the following rates characterizes this reaction?
a. a rate of 6 at 20°C and 2 at 30°C
b. a rate of 6 at 30°C and 2 at 20°C
c. a rate of 9 at 20°C and 3 at 30°C
d. a rate of 9 at 40°C and 3 at 20°C
e. a rate of 12 at 10°C and 4 at 20°C
A chemical reaction has a Q10 of 3 option c. a rate of 9 at 20°C and 3 at 30°C is the rates that characterizes this reaction
The Q10 value is a measure of how much the rate of a chemical reaction changes with a 10°C change in temperature. A Q10 of 3 indicates that the rate of the reaction will increase by a factor of 3 when the temperature is raised by 10°C.
Looking at the answer choices, we can see that option a and b have a Q10 value of 2, which is not the same as the given Q10 value of 3. Option e has a Q10 value of 4, which is also not the same.
Option d has a Q10 value of 3, but the rates given are at 20°C and 40°C, which is not a 10°C change in temperature.
Therefore, the only option that fits the given Q10 value and has rates that are 10°C apart is option c, which has a rate of 9 at 20°C and 3 at 30°C. Therefore, the answer is c.
To learn more about chemical reaction click here
brainly.com/question/29762834
#SPJ11
Option c states that the rate of the reaction is 9 at 20°C and 3 at 30°C. The ratio of rates between 20°C and 30°C is 9/3 = 3, which matches the Q10 value of 3.
c. a rate of 9 at 20°C and 3 at 30°C
The Q10 value is a measure of the temperature sensitivity of a reaction, and it is defined as the factor by which the rate of a reaction changes for every 10-degree Celsius change in temperature. A Q10 value of 3 indicates that the rate of the reaction increases by a factor of 3 for every 10-degree Celsius increase in temperature.
This means that the rate of the chemical reaction is consistent with the temperature sensitivity indicated by the given Q10 value, making option c the correct answer.
Learn more about “ chemical reaction “ visit here;
https://brainly.com/question/29039149
#SPJ4
A solution has a concentration of 3.0 M and a volume of 0.20 L. If the solution is diluted to 4.0 L, what is the new concentration, in molarity?
Your answer should have two significant figures.
which of the following aqueous solutions has the highest molar concentration of na (aq)?(assume each compound is fully dissolved in water.)group of answer choices3.0m nacl (sodium chloride)3.0m nac2h3o2 (sodium acetate)1.5m na2so4 (sodium sulfate)1.0m na3po4 (sodium phosphate)all of these solutions have the same concentration of na (aq).
All of these solutions have the same concentration of Na⁺ (aq) at 3.0 moles for molar concentration.
The highest molar concentration of Na⁺ (aq) can be determined by calculating the moles of Na⁺ ions in each solution.
1. Identify the number of sodium ions (Na⁺) in each compound:
- NaCl: 1 Na⁺ ion
- NaC₂H₃O₂: 1 Na⁺ ion
- Na₂SO₄: 2 Na⁺ ions
- Na₃PO₄: 3 Na⁺ ions
2. Calculate the moles of Na⁺ ions in each aqueous solution:
- 3.0 M NaCl: 3.0 M * 1 Na⁺ ion = 3.0 moles of Na⁺ ions
- 3.0 M NaC₂H₃O₂: 3.0 M * 1 Na⁺ ion = 3.0 moles of Na⁺ ions
- 1.5 M Na₂SO₄: 1.5 M * 2 Na⁺ ions = 3.0 moles of Na⁺ ions
- 1.0 M Na₃PO₄: 1.0 M * 3 Na⁺ ions = 3.0 moles of Na⁺ ions
3. Compare the moles of Na⁺ ions in each solution to determine the highest concentration.
All of these solutions have the same concentration of Na⁺ (aq) at 3.0 moles.
Learn more about molar concentration here:
https://brainly.com/question/21841645
#SPJ11
Though all the solutions have the same concentration of Na+ (aq), an aqueous solution of NaCl with 3.0 M has the highest molar concentration among the given solutions.
Explanation: To determine the molar concentration of Na+ (aq) in each solution, we need to consider the stoichiometry of the dissociation of each compound in water.
For sodium chloride (NaCl), it dissociates completely into Na+ and Cl- ions, so the molar concentration of Na+ (aq) is equal to the molar concentration of NaCl. Therefore, the molar concentration of Na+ (aq) in 3.0M NaCl is 3.0M.
For sodium acetate (NaC2H3O2), it dissociates into Na+ and C2H3O2- ions, but in a 1:1 ratio. So, the molar concentration of Na+ (aq) is half of the molar concentration of NaC2H3O2. Therefore, the molar concentration of Na+ (aq) in 3.0M NaC2H3O2 is 1.5M.
For sodium sulfate (Na2SO4), it dissociates into 2 Na+ ions and 1 SO4 2- ion. So, the molar concentration of Na+ (aq) is twice the molar concentration of Na2SO4. Therefore, the molar concentration of Na+ (aq) in 1.5M Na2SO4 is 3.0M.
For sodium phosphate (Na3PO4), it dissociates into 3 Na+ ions and 1 PO4 3- ion. So, the molar concentration of Na+ (aq) is three times the molar concentration of Na3PO4. Therefore, the molar concentration of Na+ (aq) in 1.0M Na3PO4 is 3.0M.
Therefore, the solution with the highest molar concentration of Na+ (aq) is 3.0M NaCl (sodium chloride).
To know more about the molar concentration of solutions:
brainly.com/question/8732513
#SPJ11
if a solution originally 0.532 m in acid ha is found to have a hydronium concentration of 0.112 m at equilibrium, what is the percent ionization of the acid?
To find the percent ionization of the acid, we need to first calculate the initial concentration of the acid (HA) before it dissociates.
Since the solution is originally 0.532 M in acid (HA), we can assume that the initial concentration of HA is also 0.532 M.
Next, we need to calculate the concentration of the conjugate base (A-) at equilibrium. We can use the equation for the dissociation of an acid:
HA + H2O ⇌ H3O+ + A-
We know that the hydronium concentration at equilibrium is 0.112 M, so the concentration of the conjugate base is also 0.112 M.
To calculate the percent ionization of the acid, we use the equation:
% ionization = (concentration of dissociated acid / initial concentration of acid) x 100
We can find the concentration of dissociated acid (H3O+) by subtracting the concentration of the conjugate base (A-) from the hydronium concentration:
[H3O+] = 0.112 M - 0 M = 0.112 M
Plugging in the values, we get:
% ionization = (0.112 M / 0.532 M) x 100 = 21.05%
Therefore, the percent ionization of the acid is 21.05%.
To know more about percent ionization :
https://brainly.com/question/1619653
#SPJ11
The percent of ionization of an acid in solution of 0.532 M in acid HA i and have a hydronium concentration of 0.112 M is equals to the 21.1%.
The ionization of acids results hydrogen ions, thus, that's why compounds act as proton donors.
Molarity of solution = 0.532 M
At Equilibrium, hydronium concentration = 0.112 M
As we know, concentration is defined as the number of moles of substance in a litre of solution, that most of time concentration is replaced by molarity. So, concentration of acid solution, [ H A] = 0.532 M
Chemical reaction, [tex]HA (aq) + H_2O -> H_3O^{ +}+A^{-}[/tex]
percent of ionization of the acid =
[tex] \frac{ [ H_3O^{+}] }{ [ HA]} × 100 [/tex]
= (0.112/0.532) × 100
= 21.1%
Hence, required value is 21.1%.
For more information about percent of ionization, visit :
https://brainly.com/question/14225136
#SPJ4
question 6 how do electrons in an atom change energy? electrons can only gain energy by leaving the atom (creating an ion). electrons move between discrete energy levels, or escape the atom if given enough energy. electrons can have any energy below the ionization energy within the atom, or escape if given enough energy. electrons can have any energy within the atom, and cannot be given enough energy to cause them to escape the atom. electrons move between discrete energy levels within the atom, and cannot accept an amount of energy that causes them to escape the atom.
The electrons cannot have any arbitrary energy within the atom, and they can be given enough energy to escape the atom, forming ions.
Electrons in an atom change energy by moving between discrete energy levels, which are quantized states within the atom. These energy levels are determined by the electron's orbitals and the principal quantum number.
Electrons can gain or lose energy through processes like absorption or emission of photons, respectively. When an electron gains enough energy, it can jump to a higher energy level, or
even escape the atom, resulting in ionization. Conversely, when an electron loses energy, it transitions to a lower energy level, emitting a photon in the process.
To learn more about : electrons
https://brainly.com/question/26084288
#SPJ11
At 215°C a gas has a volume of 18.00 L. What is the volume of this gas at 23.0°C?
Answer:
using
V1/T1=V2/T2
make V2 subject of formula
V2= V1T2/T1
V2= 1.9L
HELP PLSSSS
What's the molar mass of alumina, Al₂O₂? The atomic weight of aluminum is 26.98 and the atomic weight of oxygen is 16.00.
A. 101.96 g/mol
B. 48.00 g/mol
C. 149.96 g/mol
D. 42.98 g/mol
Bauxite has a molar mass of 148.96 g/mol. Alumina has an atomic weight of 26.98 and air has an atomic weight of 16.00. As a result, alumina's molar mass equals 42.98 g/mol Plus 26.98 g/mol (= 148.96 g/mol.
The correct answer is :D.
Is aluminum's molar mass 26.98 g mol?One mole of Al atoms possesses a mass in grammes that is numerically comparable to aluminum's atomic mass. According to this regular visual representation, the atomic weight (which was rounded to two decimals places) of Al is 26.98, hence 1 mol of Al atoms weighs 26.98 g.
What does the number 26.98 indicate in terms of aluminium?An aluminium atom possesses a weight od 26.98 amu on average. As a result, one atom of aluminium weighs 26.98 amu. A copper atom possesses an average diameter of 63.55 amu. As a result, a single copper atom weighed 63.55 amu.
To know more about atomic visit:
https://brainly.com/question/30898688
#SPJ1
A respiratory pigment that requires a relatively low O2 partial pressure for loading has ______ affinity for O2. a) a low b) a high c) no d) a variable.
A respiratory pigment that requires a relatively low [tex]O_2[/tex] partial pressure for loading has a high affinity for [tex]O_2[/tex]. Thus, the correct answer is an option (a).
Since the respiratory pigment requires low partial pressure of the gas, it has more affinity for the gas. As when compared to other pigments, it will more easily load the gas.
Affinity is defined as the degree to which a substance tends to combine with another and in this case, it is used to describe the degree to which the gas tends to combine with a respiratory pigment.
Respiratory pigment such as Myoglobin has a higher affinity than Haemoglobin to load oxygen.
Learn more about Respiratory Pigments:
https://brainly.com/question/31467554
#SPJ4
in an endothermic reaction, the total energy at the beginning of the reaction is group of answer choices less than the total energy at the end of the reaction. greater than the total energy at the end of the reaction. equal to the total energy at the end of the reaction. none of the above
The correct option is
In an endothermic response(reaction), the whole vitality(total energy) at the beginning of the response is more noteworthy than the full vitality at the conclusion of the response
because endothermic responses retain warmth from the environment, which implies that the vitality of the framework increments.
An endothermic response may be a chemical response that retains warmth from the environment, which implies that the vitality of the framework increments.
This increment in vitality is utilized to break the bonds between the particles or atoms within the reactants, and the items are shaped from the modification of these iotas or atoms into unused bonds.
As a result, the whole vitality of the framework at the conclusion of the response is more noteworthy than the full vitality at the start of the response. This increment in vitality is ordinarily watched as an increment within the temperature of the framework or its environment.
In an endothermic response, the whole vitality at the beginning of the response is less than the overall vitality at the end of the response
.
Usually, endothermic responses retain warmth from the environment, which implies that the vitality of the framework increments.
As a result, the entire vitality of the framework at the conclusion of the response is greater than the full energy at the start of the response. Subsequently,
The proper reply is "In an endothermic response(reaction), the whole vitality(total energy) at the beginning of the response is more noteworthy than the full vitality at the conclusion of the response ".
To know more about endothermic reactions refer to this :
https://brainly.com/question/1160007
#SPJ4
The breakdown of a certain pollutant X in sunlight is known to follow first-order kinetics. An atmospheric scientist studying the process fills a 20. 0Lreaction flask with a sample of urban air and finds that the partial pressure of X in the flask decreases from 0. 473atm to 0. 376atm over 5. 6hours.
Calculate the initial rate of decomposition of X, that is, the rate at which Xwas disappearing at the start of the experiment.
Round your answer to 2 significant digits
The initial rate of decomposition of X is 0.0013 M/h.
The first-order rate law is given as:
Rate = k [X]
Where, k = rate constant
[X] = concentration of X
Since the partial pressure of X is given in the problem, we need to convert it to concentration using the ideal gas law:
PV = nRT
where:
P = partial pressure of X = 0.473 atm
V = volume of the flask = 20.0 L
n = number of moles of X
R = ideal gas constant = 0.08206 L atm K^-1 mol^-1
T = temperature of the flask (assumed constant) = 298 K
Solving for n,
n = PV/RT = (0.473 atm)(20.0 L)/(0.08206 L atm K^-1 mol^-1)(298 K) = 0.952 mol X
At t = 0, the concentration of X is [X]_0 = n/V = 0.952 mol/20.0 L = 0.0476 M.
Using the given data, we can calculate the rate constant (k) as follows:
ln([X]_0/[X]) = kt
where:
t = time = 5.6 hours
Substituting the given values,
ln(0.0476/0.0376) = k(5.6 hours)
Solving for k, we get:
k = (ln(0.0476/0.0376))/5.6 hours = 0.0263 h^-1
The initial rate of decomposition of X is given by:
Rate = k[X]_0 = (0.0263 h^-1)(0.0476 M) = 0.00125 M/h
Rounding off to 2 significant digits,
Initial rate of decomposition of X = 0.0013 M/h.
To know more about decomposition, here
brainly.com/question/14057429
#SPJ4
ibuprofen has the following mass percent composition: c 75.69 % , h 8.80 % , o 15.51 % . what is the empirical formula of ibuprofen?
Rounding these values to the nearest whole number, we get the empirical formula of ibuprofen as C6H9O.
To determine the empirical formula of ibuprofen, we need to convert the mass percent composition into mole ratios. This can be done by assuming that we have 100 grams of ibuprofen, and calculating the number of moles of each element present in that sample.
Starting with carbon, we have 75.69 grams of carbon in our sample, which corresponds to 6.30 moles (using the atomic weight of carbon). Similarly, we have 8.80 grams of hydrogen, which corresponds to 8.74 moles, and 15.51 grams of oxygen, which corresponds to 0.97 moles.
To get the simplest whole number ratio of these elements, we divide each mole value by the smallest one (0.97):
- Carbon: 6.30 / 0.97 = 6.49
- Hydrogen: 8.74 / 0.97 = 9.00
- Oxygen: 0.97 / 0.97 = 1.00
This means that the molecular formula of ibuprofen could be a multiple of this empirical formula (e.g. C12H18O2), but we would need additional information (such as the molecular weight) to determine that.
To learn more about : ibuprofen
https://brainly.com/question/15179513
#SPJ11
prepare a solution of the following concentration: 23 micromoles/liter. measure its absorbance at 400 nm. how will you prepare 1 ml of the assigned solution? below, enter the volume of pnp stock solution you will pipette, and the amount of 0.100 m sodium bicarbonate. answer in microliters.
To prepare 1 mL of 23 µM/L solution, pipette stock solution and add 17.5 µL of 0.100 M sodium bicarbonate.
To set up an answer of 23 µM/L, first work out the expected measure of solute. For a volume of 1 L, 23 µmol of solute is required. To plan 1 mL of the arrangement, the expected measure of solute is 23 nmol.
Accepting the sub-atomic load of the solute is known, the mass of solute required can be determined. Then, disintegrate the mass of solute expected in a reasonable dissolvable to make a stock arrangement. Weaken this stock arrangement fittingly to set up the ideal grouping of 23 µM/L.
To gauge the absorbance at 400 nm, utilize a spectrophotometer. Set up a clear arrangement utilizing a similar dissolvable and measure the absorbance of this clear at 400 nm. Then, measure the absorbance of the example arrangement and work out the contrast between the two absorbances.
To get ready 1 mL of the relegated arrangement, pipette the necessary volume of the stock arrangement and add 17.5 µL of 0.100 M sodium bicarbonate. This is expecting that sodium bicarbonate is being utilized as a cushion to keep up with the pH of the arrangement.
The specific volume of the stock arrangement required relies upon the convergence of the stock arrangement.
To learn more about stock solution, refer:
https://brainly.com/question/21120916
#SPJ4
the tollen's test is the reaction of aldehydes with silver(i) ions in basic solution to form silver metal and a carboxylate. reaction of 2 silver 1 ions with a generic aldehyde and 3 hydroxide ions to form 2 silver atoms, a generic carboxylate, and 2 water molecules. which species is being oxidized in the reaction? aldehyde which species is being reduced in the reaction? silver(i) ion which species is the visual indicator of a positive test? silver metal
In Tollen's test, the reaction of aldehydes with silver(i) ions in basic solution results in the formation of silver metal and carboxylate.
Specifically, the reaction involves the oxidation of the aldehyde and the reduction of the silver(i) ion. This can be seen in the reaction of 2 silver 1 ions with a generic aldehyde and 3 hydroxide ions, which produces 2 silver atoms, a generic carboxylate, and 2 water molecules. The species being oxidized in the reaction is the aldehyde, while the species being reduced is the silver(i) ion. The visual indicator of a positive test is the formation of silver metal, which indicates the presence of an aldehyde in the sample.
To learn more about Tollen's test, refer:-
https://brainly.com/question/30892406
#SPJ11
In this Tollen's test, the species being oxidized is the aldehyde (RCHO), while the species being reduced is the silver(I) ion (Ag+). The visual indicator of a positive test is the formation of silver metal (Ag), which appears as a shiny silver mirror on the inner surface of the test tube.
What is Tollen's Test?In the Tollen's test, the reaction involves aldehydes reacting with silver(I) ions in a basic solution to form silver metal and a carboxylate. The generic equation for this reaction is:
2 Ag+ + RCHO + 3 OH- → 2 Ag + RCOO- + 2 H2O
In the Tollen's test, aldehydes react with silver(i) ions in basic solution to form silver metal and a carboxylate. The reaction involves the oxidation of the aldehyde and reduction of the silver(i) ion. Specifically, in the presence of 2 silver(i) ions and 3 hydroxide ions, a generic aldehyde is oxidized to form a generic carboxylate and 2 water molecules, while the silver(i) ions are reduced to form 2 silver atoms. The visual indicator of a positive test is the formation of silver metal, which indicates the presence of an aldehyde. Therefore, in this reaction, the aldehyde species is being oxidized.
To know more about Tollen's Test:
https://brainly.com/question/13833774
#SPJ11
This is a machine that converts electrical energy into mechanical energy.
A. Generator
B. Motor
C. Electricity
(why do my questions keep getting deleted?)
the shattered glass case at the scene of a jewelry store robbery was determined to be made of potash borosilicate glass, which has a density of 2.16 g/ml. a 2.573 g glass fragment was recovered from a suspect's clothing. when the fragment was placed into a graduated cylinder filled with water, 1.14 ml of the water was displaced. calculate the density of the glass fragment.
The density of the glass fragment is approximately 2.26 g/ml
What is the density of the fragment?To calculate the density of the glass fragment, we can use the formula:
Density = Mass / Volume
First, let's calculate the volume of the glass fragment using the displacement method. The volume of water displaced when the glass fragment was submerged in the graduated cylinder is given as 1.14 ml.
So, the volume of the glass fragment is 1.14 ml.
Next, we can calculate the density of the glass fragment by dividing the mass of the glass fragment by its volume:
Density = Mass / Volume = 2.573 g / 1.14 ml
Density = 2.573 g / 1.14 ml ≈ 2.26 g/ml
Learn more about density here: https://brainly.com/question/6838128
#SPJ1
In what way was the reaction of the splint and CO2 different from the reaction of the H2 to the flaming splint
Explain to the kids that since there is essentially no —which is required for fire—if the bag contains only pure carbon dioxide, the splint would burn out right away.
What occurs when a burning splint is placed in hydrogen?H2 - Hydrogen Pure hydrogen gas will burst into flames when a burning splint is added to it, making a popping sound. Oxygen (O2) A smouldering splint will rekindle when exposed to a sample of pure oxygen gas.
The flame goes out as a result of carbon dioxide replacing the oxygen it requires to burn (the effect). A popping sound is produced when a flame is near hydrogen because of how the gas burns.
learn more about flaming splint
https://brainly.com/question/30124568
#SPJ1
What mass of K₂CO₃, in grams, is present in 0.273 L of a 0.998 M solution?
Answer: Mass of K2CO3 is 37.7g
Explanation: You first need to find the moles of K2CO3 by using the molarity formula.
Molarity = moles/Liters
When you do 0.998 = moles/0.273, you will get 0.272454 moles of K2CO3.
The second step is to use the moles of K2CO3 you found and convert it to grams. As shown in the image. Make sure your final answer has the correct number of significant figures. In the question both of the numbers given have 3 sig figs therefore your final answer also needs to have 3 sig figs.
What is the difference between a bacteria cell and a
human nervous cell?
most bacteria have flagellum, also nerve cells are larger
if you are given three different capacitors C1, C2, and C3, how many different combiations of capacitance can you produce, using all capacitors in your circuits?
Assuming that the capacitors are distinct and not identical, there are eight possible combinations of capacitance that can be produced using all three capacitors in a circuit.
This is because each capacitor can either be included or excluded from the circuit, resulting in two possibilities for each capacitor. With three capacitors, there are 2x2x2 = 8 possible combinations.
For example, if C1 = 1μF, C2 = 2μF, and C3 = 3μF, the eight possible combinations would be 1μF, 2μF, 3μF, 1+2=3μF, 1+3=4μF, 2+3=5μF, 1+2+3=6μF, and no capacitor connected.
To know more about capacitance, visit:
https://brainly.com/question/28445252
#SPJ1
All right! And when that
impetus reduces,
motion also reduces.
When the impetus is
removed, the object
stops moving!
When the impetus driving an object decreases, its motion also decreases. And when the impetus is completely removed, the object stops moving.
When the impetus driving an object decreases, its motion also decreases. The term "impetus" in this context refers to the force that sets an object in motion or maintains its motion. When this force decreases, the object experiences a decrease in its velocity or acceleration. This is due to the fact that the force acting on the object is directly proportional to the rate of change of its motion, as described by Newton's second law of motion.
If the impetus is completely removed, the object stops moving altogether. This is because there is no longer any force acting on the object to maintain its motion, and hence it decelerates and eventually comes to rest. This can be seen in everyday scenarios, such as a ball rolling to a stop when it reaches the bottom of a hill or a car slowing down and stopping when the engine is turned off.
To know more about impetus, here
brainly.com/question/11112379
#SPJ4
--The complete question is, What happens to the motion of an object when the impetus driving it decreases, and what happens when the impetus is completely removed?--
explain why the amide nitrogen is much less reactive as a base towards aqueous acids than the alkylamine nitrogen. how does this experiment illustrate this?
The amide nitrogen is much less reactive as a base towards aqueous acids than the alkylamine nitrogen due to the presence of the carbonyl group adjacent to the nitrogen in the amide.
This carbonyl group withdraws electron density from the nitrogen, making it less basic and less likely to accept a proton from an aqueous acid. In contrast, the alkylamine nitrogen has no such electron-withdrawing group, and thus is more basic and more likely to accept a proton from an aqueous acid.
An experiment that illustrates this difference in reactivity is the acid-base titration of an amide and an alkylamine with hydrochloric acid. The amide would require a stronger acid and a longer titration time to reach its equivalence point, indicating its lower reactivity as a base towards aqueous acids. On the other hand, the alkylamine would require a weaker acid and a shorter titration time to reach its equivalence point, indicating its higher reactivity as a base towards aqueous acids.
Learn more about amide nitrogen here: brainly.com/question/30724866
#SPJ11
100 POINTS - A sample of crushed rock is found to have 4. 81 x10^21 atoms of gold, how many moles of gold are present in this sample? SHOW WORK INCLUDING FORMULA : THANK YOU
There are 0.00799 moles of gold present in the sample of crushed rock.
The formula to convert the number of atoms of an element to moles is:
moles = number of atoms / Avogadro's number
where Avogadro's number is approximately 6.022 x 10^23.
Using the given information, we can calculate the number of moles of gold present in the sample:
moles of gold = 4.81 x 10^21 atoms / 6.022 x 10^23 atoms/mol
moles of gold = 0.00799 mol
Note: The answer has been rounded to five significant digits in accordance with the significant figures of the given number of atoms.
To know more about atoms, here
brainly.com/question/30898688
#SPJ4
the volume of a balloon containing an ideal gas is 3.78 l at 1.05 atm pressure. what would the volume be at 2.75 atm with constant temperature and molar amount? view available hint(s)for part a the volume of a balloon containing an ideal gas is 3.78 l at 1.05 atm pressure. what would the volume be at 2.75 atm with constant temperature and molar amount? 9.90 l 1.44 l 0.764 l 10.9 l
The volume of the balloon at 2.75 atm pressure with constant temperature and the molar amount would be approximately 1.44 L.
Let's understand this in detail:
We'll use Boyle's Law to solve this question, which states that the product of the pressure and volume of an ideal gas is constant when the temperature and molar amount remains constant.
The formula for Boyle's Law is P1V1 = P2V2, where P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume.
Initial volume (V1) = 3.78 L
Initial pressure (P1) = 1.05 atm
Final pressure (P2) = 2.75 atm
Constant temperature and molar amount
To find the final volume (V2), rearrange the formula:
V2 = (P1V1) / P2
Plug in the given values:
V2 = (1.05 atm * 3.78 L) / 2.75 atm
V2 ≈ 1.44 L
So, the volume of the balloon at 2.75 atm pressure with constant temperature and the molar amount would be approximately 1.44 L.
Learn more about Boyle's law: What is Boyle’s law? https://brainly.com/question/1696010
#SPJ11
The volume of the balloon containing the ideal gas would be 1.44 L at 2.75 atm pressure with constant temperature and molar amount.
We can use the ideal gas law to solve this problem: PV = nRT, where P is the pressure, V is the volume, n is the molar amount, R is the gas constant, and T is the temperature. Since we are keeping the temperature and molar amount constant, we can simplify the equation to PV = k, where k is a constant.
Using the initial conditions, we have:
(1.05 atm)(3.78 L) = k
Solving for k, we get k = 3.969 L*atm.
Now, we can use the same equation with the new pressure to find the new volume:
(2.75 atm)(V) = 3.969 L*atm
Solving for V, we get V = 1.44 L.
To learn more about ideal gas, refer:-
https://brainly.com/question/28257995
#SPJ11
if 10 grams of aluminum reacts with 4 grams of oxygen, what is the expected grams of product?
Expected grams of aluminum oxide product from the given masses of reactants are 18.93 g.
What is aluminum?Aluminum is chemical element with symbol Al and atomic number is 13.
4Al + 3O₂ → 2Al₂O₃
10 g Al × 1 mol Al / 26.98 g Al = 0.371 mol Al
4 g O₂ × 1 mol O₂ / 32.00 g O₂ = 0.125 mol O₂
We determine the limiting reactant by comparing the mole ratios of aluminum and oxygen in the balanced equation and reactant that produces smaller amount of product is limiting reactant. In this case, aluminum is the limiting reactant because it produces only 0.1855 moles of aluminum oxide, which is less than the 0.25 moles of aluminum oxide produced by the oxygen:
0.371 mol Al × 2 mol Al₂O₃ / 4 mol Al = 0.1855 mol Al₂O₃
0.125 mol O₂ × 2 mol Al₂O₃ / 3 mol O2 = 0.2083 mol Al₂O₃
0.1855 mol Al₂O₃ × 101.96 g/mol = 18.93 g Al₂O₃
Therefore, expected grams of aluminum oxide product from the given masses of reactants are 18.93 g.
To know more about aluminum, refer
https://brainly.com/question/27859211
#SPJ1