If the pressure gauges read low pressure on the high side, high pressure on the low
side, or about equal pressures, what might it indicate?
The system may be low on refrigerant.
The compressor is not working fully.
There is a blockage in the low side of the system that is not allowing refrigerant
to pass.
There is a blockage on the high side or an airflow restriction across the
condenser.

Answers

Answer 1

Note that if the pressure gauges read low pressure on the high side, high pressure on the low side, or about equal pressures, what tthis might indicate is that "There is a blockage on the high side or an airflow restriction across the condenser." (Option D)

How can the above problem be resolved?

A high-side obstruction or an airflow restriction over the condenser can be remedied by locating and eliminating the cause of the blockage or restriction.

This may include cleaning or replacing filthy filters, inspecting the condenser unit for debris, and inspecting for any other obstacles that may be restricting airflow.

A professional technician should be summoned if the system needs to be inspected and repaired.

Learn more about Condenser:
https://brainly.com/question/15563071
#SPJ1


Related Questions

The variable isOpen is to be used to indicate whether or not a store is currently open. Which of the following the most appropriate data type for isOpen?
A. Boolean
B. number
C. string
D. list

Answers

The most appropriate data type for is Open is a Boolean. Correct answer: letter A.

A Boolean is a data type that can only have one of two values, either true or false. In this case, the value of is Open would be true if the store is open, and false if it is closed.

Variables are used to store data or values in a program. There are different types of variables depending on the type of data they are used to store.

The most common types of variables are numerical variables which are used to store numeric values such as integers and floats, string variables which are used to store text or character values, Boolean variables which are used to store true or false values, and lists which are used to store multiple values. Each type of variable has its own characteristics and can be used in different ways to create more complex programs.

Learn more about Boolean:

https://brainly.com/question/26041371

#SPJ4

using the definition of moment of inertia, calculate ib , the moment of inertia about an axis through point b, for this object. point b coincides with (the center of) one of the spheres (see the figure).

Answers

Assuming the object is composed of two spheres of radius R and mass M, the moment of inertia about an axis through point b is given by Ib = 2MR2.

Moment of Inertia

The theory used in this question is the definition of the Moment of Inertia.

This states that the moment of inertia is the rotational inertia of a body about a given rotation axis, equal to the sum of the products of the mass of each particle in the body and the square of its distance from the axis.

Step 1: Define the Moment of Inertia.

The moment of inertia (I) is the rotational inertia of a body about a given rotation axis, equal to the product of the mass of each individual body particle and the square of its angular separation from the axis.

Step 2: Identify the Object. The object consists of two spheres with radius R and mass M.

Step 3: Calculate the Moment of Inertia. Since point b coincides with the center of one of the spheres, the moment of inertia about an axis through point b is given by Ib = 2MR2.

To learn more about Moment of Inertia refer :

https://brainly.com/question/14460640

#SPJ4

Trojan Horses
Revisit the permissions on the /shared_data/accounting.txt file. Bob is unable to read this file, but he would very much like to know its content.
Bob knows Alice is a fool for ASCII art, and so he creates the /shared data/bob/fun script. View and take a screenshot of this file's contents with an appropriate command (as Bob). Your output should look fun/maybe be some ASCII art.
As Bob, can you modify that script so that if Alice (or Harry) run the script, it will make a copy of the accounting.txt file in a manner that allows Bob to see the content? In other words, when Alice runs the file, Bob gets access to the file
Play around with the permissions and see how far you can get, as Bob, in gaining access to Alice's accounting.txt file. You might want to check the permissions on the /shared_data directory – check out the ls command options for the appropriate flag to do this.

Answers

Yes, Bob can change the script to copy the accounting.txt file to a location where he can see it. He can verify the permissions of the /shared_data directory with the ls -l command.

What are permissions for files?

The ability to control who can access and modify files is the basis of the theory behind this question. The chmod command, as well as user and group accounts, are used to implement this crucial aspect of computer security.

The following are the procedure's steps:

1: To examine the permissions of the /shared_data directory, Bob can use the command "ls -l." He will be able to check to see if Alice has granted him access to the accounting.txt file by using this method.

2: Bob can modify the permissions with the chmod command if they are incorrect. Bob will be able to read the file due to this.

3: Bob can develop a script to move the accounting.txt file to a location where he has permission to view it once he has the appropriate permissions. To create the copy, he can use the cp command.

4: Finally, Bob can change the script so that when Alice or Harry run it, the accounting.txt file will be copied in a way that lets Bob see the contents.

What does the Trojan horse virus do?

A Trojan, also known as a Trojan horse, is a type of malware that deceives users into thinking a harmless file is what it really is. A Trojan's "payload" is unknown to the user, but it can serve as a delivery vehicle for a variety of threats, similar to the wooden horse used to sack Troy.

Learn more about Trojan Horses :

brainly.com/question/29757000

#SPJ4

a 600-lb tensile load is applied to a test coupon made from 0.625-in. flat steel plate (e=29 msi, n=0.3). determine the resulting change (a) in the 2-in. gage length, (b) in the width of portion ab of the test coupon\

Answers

The theory used in this question is Hooke's Law, which states that the amount of stress (force divided by area) applied to an object is proportional to the amount of strain (deformation of the object) caused.

a) The change in the 2-in. gage length is 0.0079 in.

b) The change in the width of portion ab of the test coupon is 0.0035 in.

What is Hooke's Law?

This means that if a certain amount of force is applied to an object, the amount of deformation will be proportional to the force. To answer the question, we can use the formula for Hooke's Law, which is:

Stress = E x Strain

where E is the Modulus of Elasticity of the material and Strain is the change in length of the object divided by its original length.

Since we know the tensile load (600 lb) and the modulus of elasticity (E = 29 msi) of the material, we can calculate the strain of the object.

Strain = Stress / E

= 600 lb / 29 msi        

= 0.0207

This means that the object will be deformed by 0.0207.

We can then calculate the change in the 2-in. gage length using the formula:

Change in Length = Original Length x Strain

= 2 in. x 0.0207

= 0.0079 in.

We can similarly calculate the change in the width of portion AB of the test coupon, using the formula:

Change in Width = Original Width x Strain

= 0.625 in. x 0.0207

= 0.0035 in.

To learn more about Hooke's Law refer :

https://brainly.com/question/2648431

#SPJ4

genetic engineering is possible because the genetic code of all organisms is based on the same _______________. however, all attempts to genetically engineer new organisms are not successful.

Answers

Answer:

DNA

Explanation:

Which of the following is NOT a function of the operating system?A. Managing resourcesB. Providing Internet accessC. Providing a user interfaceD. Running applications

Answers

The correct answer is D. Running applications. Operating systems do not actually run applications; rather, they provide an environment in which applications can run and access the system's resources.

Operating systems provide services such as managing resources, providing a user interface, and providing internet access.

Operating systems (OS) are the software that manages and provides access to the hardware and other software applications on a computer or other device. An OS provides the interface between the hardware and other software, allowing them to communicate and work together. It also controls and allocates the resources of a computer system and provides services like memory management, task scheduling, input/output processing, and networking. Operating systems can be either single-user or multi-user, and can be found on a variety of devices, including desktop and laptop computers, smartphones, tablets, and embedded systems.

Learn more about Operating systems

https://brainly.com/question/19212961

#SPJ4

what is providing the upward force to propel the rocket into space?

Answers

The gravity of earth

A Search Distance Heuristic Homework. Unanswered o For each method - sometimes used as heuristic, what is the distance from start to end? (Ignore any coloring in the boxes) Drag and drop options on the right-hand side and submit. For keyboard navigation...Show More Manhattan Distance V41 Chebyshev Distance = Euclidean Distance = G = 9 = 7 Fullscreen

Answers

A search distance heuristic is an algorithm used to find the shortest path between two points in a graph.

The Manhattan distance heuristic is based on the idea of moving along a grid using only horizontal and vertical steps, while the Chebyshev distance heuristic is based on the idea of moving along a grid using only diagonal steps.

The Euclidean distance heuristic is based on the idea of moving along a straight line between two points. The G-value heuristic is based on the idea of using a cost function to determine the optimal path between two points.

Learn more about the heuristic:

https://brainly.com/question/25878205

#SPJ4

the string described in the problem introduction is oscillating in one of its normal modes. which of the following statements about the wave in the string is correct?

Answers

The wave in the string is a standing wave, meaning that the wave pattern does not move along the string but instead remains in the same position.

The wave is also periodic, meaning that it repeats itself at regular intervals. The wave is characterized by its frequency, which is the number of times the wave pattern repeats itself in a given time period. The wave also has an amplitude, which is the maximum displacement of the wave from its equilibrium position. The wave also has a wavelength, which is the distance between two successive peaks or troughs of the wave. The wave also has a phase, which is the position of the wave relative to a reference point. Waves in technology refer to the transmission of energy through a medium, such as sound waves, radio waves, and light waves. These waves can be used to transmit information, such as in radio and television broadcasts, or to generate power, such as in solar cells. Waves can also be used to detect objects, such as in radar and sonar systems. Waves can also be used to measure distances, such as in laser rangefinders.

Learn more about wave here

https://brainly.com/question/3639648

#SPJ4

which of the following is true about log files? group of answer choices they aid in database roll back log files are optional for each database there can be only one log file per database they should be stored on the same physical disk as data files

Answers

The following statements are true about log files:

Log files are essential for databases as they are used to keep track of all changes made to the database.Log files should be stored on a separate physical disk from the data files, as they are used to recover data in the event of a failure.There can be multiple log files per database, depending on the size and complexity of the database.

Log files are essential for databases as they are used to keep track of all changes made to the database. Log files contain information about each change that is made to the database, such as the type of change (e.g. insert, update, or delete), the time of the change, and the user who made the change.

This information is used to ensure the integrity of the data, and to recover data in the case of a system crash or corruption. Log files should be stored on a separate physical disk from the data files, as they are used to recover data in the event of a failure. There can be multiple log files per database, depending on the size and complexity of the database.

Learn more about Log files:

https://brainly.com/question/4595770

#SPJ4

movement pattern exhibits the normal pattern of coupling in which is associated with to the side.

Answers

Movement patterns that exhibit the normal pattern of coupling in technology involve the use of multiple devices or systems working together in a coordinated manner.

Robotics, automation, and virtual reality involve the use of multiple devices or systems working together in a coordinated manner. Robotics involves the use of robots to perform tasks, automation involves the use of machines to perform tasks, and virtual reality involves the use of computer-generated environments to simulate real-world scenarios. Robotics is the science and technology of designing, constructing, and operating robots. Robots are machines that are programmed to perform specific tasks autonomously or semi-autonomously. Robotics is used in a variety of industries, from manufacturing to healthcare, and is becoming increasingly important in the modern world. Robotics can be used to automate processes, reduce costs, and improve safety and efficiency. Robotics is also used in research and development, as well as in entertainment and education.

Learn more about Robotics  here

https://brainly.com/question/30098900

#SPJ4

what are some of the newest fuel injectors use wafers of quartz or ceramic alloys that expand slightly when voltage is applied called

Answers

Some of the newest fuel injectors use wafers of quartz or ceramic alloys that expand slightly when voltage is applied, and these are called piezoelectric fuel injectors.

Piezoelectric fuel injectors use a piezoelectric material, such as quartz or ceramic alloys, to create a small electric charge when voltage is applied. This electric charge causes the wafer to expand slightly, which in turn opens the fuel injector and allows fuel to be injected into the engine. Piezoelectric fuel injectors are more efficient and reliable than traditional fuel injectors, and they are becoming increasingly popular in modern vehicles. The piezoelectric material used in these fuel injectors is very durable and can withstand high temperatures and pressures, making them ideal for use in modern engines. Additionally, the piezoelectric material is very responsive, allowing for precise control of the fuel injection process. This makes piezoelectric fuel injectors ideal for use in modern engines, as they can provide more efficient and reliable fuel injection.

Learn more about Piezoelectric fuel injectors  here

https://brainly.com/question/29690670

#SPJ4

what is the most utilized renewable resource of the united states? * 1 point wind biomass hydroelectric solar

Answers

Wind is the most utilized renewable resource of the United States. According to the U.S. Energy Information Administration, wind energy accounted for 7.3% of total U.S. electricity generation in 2019.

This is more than any other renewable energy source, including biomass, hydroelectric, and solar. Wind energy is generated by the movement of air, which is harnessed by wind turbines. Wind turbines convert the kinetic energy of the wind into electrical energy, which can then be used to power homes and businesses. Wind energy is a clean, renewable, and cost-effective source of energy that can help reduce the United States' dependence on fossil fuels. Wind energy is generated by the movement of air, which is harnessed by wind turbines. Biomass energy is generated by burning organic materials, such as wood, agricultural waste, and animal waste. Hydroelectric energy is generated by the movement of water, which is harnessed by dams and other structures. Solar energy is generated by the sun, which is harnessed by solar panels.

Learn more about wind energy here

https://brainly.com/question/29293441

#SPJ4

a hunter is raising his game off the ground in a game bag using the setup shown. the hunter starts walking from rest (at x = 0) and moves to the left at an acceleration of a = 0.5 - 0.05x to pull the bag upward. The upper pulley is 5 meters abovethe ground and the hunter is pulling from an elevation of 2 meters. The total length of the cable is 9 meters and the bag hangs down 1 meter from the lower pulley. Determine the elevation of the bottom of the bag above the ground and the upward velocity of the bag when the unter is 2 meters to the left. (1.30 m, 0.372 m/s)

Answers

This question uses the kinematic equations of motion to solve for the elevation of the bottom of the bag and the upward velocity of the bag.

The required details for kinematic equations in given paragraph

Elevation of the bottom of the bag = 5 + 1 - 2 = 4 m

Upward velocity of the bag = a × x = (0.5 - 0.05x) × 2 = 0.7 m/s

Kinematic equations are equations used to describe the motion of an object.

The equations used in this problem are:

Position (x): x = x0 + v0t + 1/2at^2

Velocity (v): v = v0 + at

The first equation is used to calculate the position of the bag, which is the elevation of the bottom of the bag above the ground.

The initial position (x0) is 0, since the hunter starts at rest at x = 0.

The initial velocity (v0) is 0, since the hunter starts from rest. The acceleration (a) is 0.5 - 0.05x, since the hunter accelerates to the left at this rate.

The time (t) is the distance the hunter has traveled (2 meters).

Plugging this into the first equation, we get:

Elevation of the bottom of the bag =x

= 0 + 0 + (1/2)(0.5 - 0.05x) × 2^2

 = 4 m

The second equation is used to calculate the velocity of the bag, which is the upward velocity of the bag. The initial velocity (v0) is 0, since the hunter starts from rest. The acceleration (a) is 0.5 - 0.05x, since the hunter accelerates to the left at this rate. The time (t) is the distance the hunter has traveled (2 meters).

Plugging this into the second equation, we get:

Upward velocity of the bag = v = 0 + (0.5 - 0.05x) × 2

                                              = 0.7 m/s

                                                 

To learn more about kinematic equations refer :

https://brainly.com/question/24458315

#SPJ4

What is the change in the internal energy, in Btu/lbm, of air as its temperature changes from 100 to 200°F? Is there any difference if the temperature were to change from 0 to 100°F?The constant-volume specific heat of air at room temperature is cv = 0. 171 Btu/lbm·R. Consider the variation of specific heat with temperature. Cv = 0. 1725 Btu/lbm·R at 150°F and cv = 0. 1712 Btu/lbm·R at 50°F

Answers

Air loses -971 Btu/lbm of internal energy when the temperature rises from 100 to 200°F.

What is the change in internal energy of the system?Air's intrinsic energy varies by -971 Btu/lbm as its temperature rises from 100 to 200°F. The internal energy of air changes by +971 Btu/lbm when its temperature rises from 0 to 100°F.The sum of the heat transmitted and the work done determines the change in a system's internal energy. The change in the system's internal energy plus the work performed by the solar panels equals the heat flow.The total kinetic energy of all the individual gas molecules can be considered to be our system's internal energy U. Consequently, as the gas's temperature T rises, the molecules move more quickly, and the gas's internal energy U rises.

To learn more about internal energy refer to :

https://brainly.com/question/30129462

#SPJ4

what aspect of architecture has no significant impact on implementing a digital engineering approach

Answers

Use architectural tools to demonstrate the locations where open standards will be applied.

What features does digital architecture have?Since all of these traits were present in Hussein Chalayan's works, it was able to organise the qualities of digital architecture into five categories: immateriality, interaction, nonlinearity, fluidity, and hypersurface.Use architectural tools to demonstrate the locations where open standards will be applied.-Use functional models to have a better understanding of the necessary capabilities.-Models should only be used for software implementation.-Use non-digital technologies to facilitate trade space analysis and quick prototyping.Technology may increase a structure's durability and efficiency while also making it simpler for architects to portray a building design more precisely.

To learn more about architectural   refer to:

https://brainly.com/question/29331720

#SPJ4

which of the following could be used to replace steps 3 and 4 so that the algorithm works as intended? responses step 3 increase the value of position by 1. step 4 repeat steps 2 and 3 until the value of count is greater than 100. step 3 increase the value of position by 1 . step 4 repeat steps 2 and 3 until the value of count is greater than 100 . step 3 increase the value of position by 1. step 4 repeat steps 2 and 3 until the value of position is greater than n. step 3 increase the value of position by 1 . step 4 repeat steps 2 and 3 until the value of position is greater than n . step 3 repeat step 2 until the value of count is greater than 100. step 4 increase the value of position by 1. step 3 repeat step 2 until the value of count is greater than 100 . step 4 increase the value of position by 1 . step 3 repeat step 2 until the value of position is greater than n. step 4 increase the value of count by 1.

Answers

Steps 4 and 5 could be replaced with the following option to ensure that the method functions as intended:choice D.

What is an algorithm?Steps 4 and 5 could be replaced with the following option to ensure that the method functions as intended:choice DAn algorithm is a regular formula (process) made up of a series of finite steps and instructions that are carried out on a computer system in order to allow software to solve a specific problem under the necessary circumstances.In this case, the following alternatives could be used to swap out stages 4 and 5 so that the algorithm performs as the programmer intended:Step 4: Continue to repeat steps 2 and 3 until position's value exceeds n.Step 5: Show true if count is higher than or equal to (>) 2Display false if not.

To learn more about algorithm refer

https://brainly.com/question/27777223

#SPJ4

xianghu and yunshu recently learned the asymptotical analysis. the key idea is to evaluate the growth of a function

Answers

The key idea is to evaluate the growth of a function by analyzing its limiting behavior as the input approaches a certain value or infinity.

Asymptotical analysis

Asymptotical analysis is a great tool for analyzing the efficiency of algorithms. By understanding how the algorithm performs in different scenarios, Xianghu and Yunshu can make informed decisions and select the best algorithm for their needs.

This knowledge can save them time and resources, as they will be able to quickly select the most efficient algorithm for their tasks.

They are using this technique to analyze the efficiency of various algorithms. they have discovered that some algorithms are better at handling large datasets,

While others perform better on small datasets. this knowledge is helping them to choose the best algorithm for their tasks.

Asymptotical analysis is a great tool for analyzing the efficiency of algorithms.

By understanding how the algorithm performs in different scenarios, Xianghu and Yunshu can make informed decisions and select the best algorithm for their needs.

This knowledge can save them time and resources, as they will be able to quickly select the most efficient algorithm for their tasks.

To learn more about Asymptotical analysis refer :

https://brainly.com/question/28333656

#SPJ4

for the circuit in fig. p3.82 choose the value of rl so that the power dissipated in it is a maximum

Answers

The Venn equivalent circuit, as seen by rl, has a 4.165 mw value such that the load average power is maximum.

Thevenin’s theorem states that any linear active bilateral network made up of energy sources, resistances, etc. with defined open output target terminals may be transformed into a straightforward network made up of a voltage source connected in series with a resistance. Maximum Power Transfer Theorem: When the load resistance is equal to the equivalent source resistance as seen by it, maximum power is transmitted to the load in any linear active bilateral network made up of energy sources and the internal resistances that derive an external load. Rth: During Rth calculation, independent voltage source and Independent current source experience short-circuiting and open-circuiting, respectively.

Learn more about Thevenin’s theorem here:

https://brainly.com/question/29801802

#SPJ4

after passing another vehicle on the highway, what is the best indication that it is safe to retrun to the lane in front of the vehicle that is passed

Answers

If five or more cars are following you while you are travelling on a two-lane roadway where passing is dangerous, turn around.

A highway or highway with only one lane of traffic in each direction and typically no intermediate obstacles is referred to as a double carriageway or dual carriageway. It might have been constructed thus way because to limitations or space set aside for expansion as traffic volumes rise. Example of a two-lane road showing that passing is allowed Markers for two lanes, with overtaking allowed in both directions. A yellow centreline marking with a dash in the middle designates a two-lane road. Arrows show direction. One lane in each direction of travel. It might have been constructed thus way because to limitations or space set aside for expansion as traffic volumes rise. If five or more cars are following you while you are travelling on a two-lane roadway where passing is dangerous, turn around.

Learn more about Dual carriageway here:

https://brainly.com/question/29510481

#SPJ4

given a channel with intended capacity of 90 mbps, the bandwidth of the channel is 8 mhz.what signal-to-noise ratio is required to achieve this capacity?

Answers

The signal-to-noise ratio required to achieve a channel capacity of 90 Mbps with a bandwidth of 8 MHz is 18 dB.

The signal-to-noise ratio (SNR) is a measure of the ratio of the signal power to the noise power in a communication system. The SNR required to achieve a channel capacity of 90 Mbps with a bandwidth of 8 MHz can be calculated using the Shannon-Hartley theorem. According to this theorem, the SNR required to achieve a channel capacity of C Mbps with a bandwidth of B MHz is given by SNR = (C x log2(1 + S/N))/B. In this case, the SNR required to achieve a channel capacity of 90 Mbps with a bandwidth of 8 MHz is (90 x log2(1 + S/N))/8 = 18 dB.

Learn more about signal-to-noise ratio here

https://brainly.com/question/21988943

#SPJ4

motorcycles are extremely hard to see if they are _______.

Answers

Answer:low,quiet, if its night if they are black

Explanation:

A rectangular brick-lined channel (n = 0.016) of 4.0-m width i laid on a bottom lope of 0.0009. It carrie a dicharge of 15 m3 / and the fl ow i non-uniform. If the depth at a Section A i 2.6 m, calculate the depth at ection B, 500 m downtream of A, by uing (a) only one tep, and (b) two tep.

Answers

Answer:0.00023

Explanation:

Trust me

to be executed, which of the following does python programming language use? group of answer choices calculator interpreter compiler translater

Answers

Python has become a popular choice for web development, scripting, scientific computing, artificial intelligence, and more. The Python Programming language uses interpreter.

What is python programming language?

Python is a high-level, interpreted, general-purpose programming language. It is a widely used, versatile language that is easy to learn and has powerful libraries for data manipulation and analysis. It is a cross-platform language that can be used on both Windows and Unix-based systems. Python is known for its readability, making it easier to read and understand. It uses English keywords instead of punctuation and is less verbose than other languages. Its syntax allows programmers to express concepts in fewer lines of code than other languages. Python supports object-oriented, procedural and functional programming paradigms. Python was designed to be easy to use and its source code is available under an open source license.

It has a large, active community of developers and users who share tips, tutorials, and code. As a result, Python  has become a popular choice for developers and data scientists.

To learn more about Python program refer to:

brainly.com/question/27996357

#SPJ4

The orifice tube should be replaced if the compressor comes apart internally because
it can catch debris from the compressor and become clogged.
true
false

Answers

The statement given is TRUE.

What is a Compressor?

A compressor is a mechanical device that lowers a gas's volume while raising its pressure. One particular kind of gas compressor is an air compressor. Pumps and compressors are comparable in that both raise the pressure on a fluid and can move it through a pipe.

Hence, it can be seen that the orifice tube should be replaced if the compressor comes apart internally because it can catch debris from the compressor and become clogged.

Read more about compressors here:

https://brainly.com/question/29345949

#SPJ1

g for the three-bus system whose ybus is given, calculate the second iteration value of v3 using the gauss-seidel method. assume bus 1 as the slack (with v1 5 1.0/08), and buses 2 and 3 are load buses with a per-unit load of s2 5 1 1j0.5 and s3 5 1.5 1 j0.75. use voltage guesses of 1.0/08 at both buses 2 and 3. the bus admittance matrix for a three-bus system is ybus 5 3 2j10 j5 j5 j5 2j10 j5 j5 j5 2j104

Answers

The question is asking for the second iteration value of V3 using the Gauss-Seidel method. V3 = 1.0419 - j0.2564

The Gauss-Seidel method is an iterative numerical technique used to solve systems of linear equations. The technique is based on the idea of successively improving the solution of a linear system of equations by iteratively solving for each unknown one at a time.

The steps for calculating V3 using this method are as follows:

1. Calculate the admittance matrix of the system (Ybus):

Ybus =

3 2j10 j5 j5

j5 2j10 j5

j5 j5 2j10

2. Calculate the net complex power injection at each bus:

S1 = 0 (slack bus)

S2 = 1 + j0.5

S3 = 1.5 + j0.75

3. Calculate the initial voltage guess at each bus:

V1 = 1.0/08 (slack bus)

V2 = 1.0/08

V3 = 1.0/08

4. Calculate the power flow equations at each bus:

V1 = 1.0/08

V2 = V1 - Y21 (V2 - V1) + Y22 (V2 - V3) - S2

V3 = V2 - Y32 (V2 - V3) + Y33 (V3 - V1) - S3

5. Use the Gauss-Seidel method to calculate the second iteration value of V3:

V3 = V2 - Y32 (V2 - V3) + Y33 (V3 - V1) - S3

= 1.0/08 - (2j10)(1.0/08 - 1.0/08) + (2j10)(1.0419 - j0.2564 - 1.0/08) - (1.5 + j0.75)

= 1.0419 - j0.2564

To learn more about Gauss-Seidel method refer :

https://brainly.com/question/13567892

#SPJ4

Which of the following best describes the universal biohazard label?

Answers

[tex]\huge\underline{\red{A}\green{n}\blue{s}\purple{w}\pink{e}\orange{r} →}[/tex]

Labels are fluorescent orange or orange-red with lettering and symbols in a contrasting color.

Explanation:

Hope it helps you~

the hub and blades of a utility scale wind turbine form the ________, which converts wind energy into rotational energy that turns an electrical generator

Answers

An electric generator is linked to the rotor, which rotates when the blades are turned by the wind.

What is the conversion of wind turbine energy? An electric generator is linked to the rotor, which rotates when the blades are turned by the wind.The four basic components of most wind turbines are as follows: A hub, to which the blades are fastened, rotates in tandem with them.Rotor is comprised of blades and hub.The aerodynamic force produced by a wind turbine's rotor blades—which function similarly to an airplane wing or a helicopter rotor blade—converts wind energy into electricity.Gearbox.The main bearing, main shaft, gearbox, generator, and rotor make up the drivetrain.The rotor (blades and hub assembly) of the turbine rotates at low speed and high torque, which is converted into electrical energy by the drivetrain.

To learn more about electric generator refer

https://brainly.com/question/12475693

#SPJ4

A plane flying through the air can be modeled like a particle. Which of the following forces should be included on the free body diagram?
a. the thrust from the engines
b. the friction of the air
c. the weight of the plane
d. the lift from the wings
e. the force connecting the wing to the plane

Answers

The push from the engines, air friction, the weight of the plane, the lift from the wings, and the force attaching the wing to the plane are the forces that need to be shown on the free body diagram

A free body diagram is a technique used to examine a particle's motion by taking into account all of the forces that are exerting pressure on it. The thrust from the engines, air friction, the weight of the plane, lift from the wings, and the force linking the wing to the plane should all be represented on the free body diagram when simulating a plane traveling through the air as a particle. The force moving the plane forward is the thrust from the engines. The force that the plane must overcome to move through the air is air friction. Gravity is dragging the plane down because of the weight of the aircraft.

Learn more about plane here-

https://brainly.com/question/29511090

#SPJ4

three different materials, designated a, b, and c, are tested in tension using test specimens hav- ing diameters of 0.505 in. and gage lengths of 2.0 in. (see figure). at failure, the distances between the gage marks are found to be 2.13, 2.48, and 2.78 in., respec- tively. also, at the failure cross sections, the diameters are found to be 0.484, 0.398, and 0.253 in., respectively. determine the percent elongation and percent reduction in area of each specimen. using your own judgment, classify each material as brittle or ductile.

Answers

The first material(a) is a Brittle material and The last material(c) is a Ductile material.

What is a Ductile and Brittle material ?

A material's ductility refers to its capacity to withstand plastic deformation or drawing without breaking. As a result, it provides information on how "soft" or pliable the material is. The types and concentrations of alloying elements present affect the ductility of steels in different ways.

A material's susceptibility to drawing is referred to as a mechanical attribute as ductility. The degree to which a material can withstand plastic deformation under tensile stress before failing is known as ductility in the field of materials research. In engineering and manufacturing, ductility is a crucial factor.

Glass, ceramic, graphite, and certain alloys with very low plasticity are examples of brittle materials. In these materials, fractures can start without plastic deformation and quickly progress to brittle breaking.

Diameter of the materials are 0.505 in

Diameter after appling tension in each material 0.484, 0.398 and 0.253 in

Initial length of the materials are 2 in

Length after appling tension in each material 2.13, 2.48 and 2.78 in

We can observe that the first material is not elongating that much as well as is not changing its diameter that much so the material can be classified as Brittle.

Again, We can observe that the last material is elongating maximum  as well as its diameter changed  maximum so the material can be classified as Ductile..

To learn more about Material properties refefr to :

https://brainly.com/question/14959576

#SPJ4

Other Questions
(c) what is the minimum thickness of a soap bubble film (air-soap-air) with refractive index 1.38 that results in a constructive interference in the reflected light if this film is illuminated by a beam of light of wavelength 610 nm? plsss turn this into a rough draft asap The fact is, not all athletes are positive role models. Unfortunately, some athletes engage in negative behavior, but overall, the athletic lifestyle lends itself to a position of positive role modeling for adolescents. As many as 59 percent of adolescents can identify a role model in their lives, according to research published in the January 2011 issue of the Journal of Adolescent Health. Of the adolescents with role models, those that looked to athletes were more likely to make positive health-related decisions. write 3 different functions in c to create an array of 10 integers on the heap without causing a memory leak. hint: you will need to assign the address to a pointer that was created outside the function. remember, you can return an address or change what a pointer points to (the contents of a pointer) in a function by passing the pointer by reference or by passing the address of the pointer. income statement pearson brothers recently reported an ebitda of $7.5 million and net income of $1.8 million. it had $2.0 million of interest expense, and its corporate tax rate. was 40%. what was its charge for depreciation and amortization? What is the domain of the function f(x) = -x +15?O x 30 x > -2O all real numbersO x >0 which body system effects would the nurse state as occurring due to immobility? select all that apply. if a bill is approved by the house of representatives where must it go next please help what are the areas of these figures ? the area of the triangle is____cm^2the area of the rectangle is___cm^2 Please help me with this what is the answer A tudent repeated weighed a lead block know to have a true ma of 13.00 g. The reult of the 4 trial are: 12.78 g, 12.82 g, 12.75g and 12.80 g. State the reult of 4 trial i precie, accurate or both or none. Explain. An error in DNA where one base is added. Connecting History and Literature Writing Answer 1. Why did Texas ranchers like Adam Brite drive their cattle north? 2. What did "stampeders" gain from stampeding a herd on the trail? 3. What factors made Brite's trail drive a likely target for rustlers or stampeders? question content area part 1 scarcity part 2 a. can be overcome by discovering new resources. b. stems from the incompatibility between limited resources and unlimited wants. c. is a bigger problem in market economies than in socialist economies. d. can be eliminated by rationing products. lobster blood is blue once it is exposed to air. what color is it inside a living lobster? according the equilibrium theory of island biogeography, the species composition of an island will not change once equilibrium is reached. group of answer choices true false According to the five forces model, an unattractive industry would include all of the following characteristics EXCEPT:-low economies of scale needed for new firms to enter.-low supplier power due to commodity inputs.-high threat of substitute products due to a large number of low-cost alternatives.-high bargaining power of buyers due to low switching costs. describe and differentiate ways of scheduling linux commands to be executed in the future. how are advertising and democracy different contexts for communication? a. all of these choices. b. the channel by which you communicate is different. c. the amount of attention given to the audience is different. d. none of these choices. e. the goals of the communication are different. kicked the ball in the air with an initial velocity of 12m/s at an angle of 40 above the horizontal. If the ball travels a horizontal distance of 15m , how long will it fly in the air? You have isolated a motile, gram-positive cell with no visible nucleus. You can safely assume that the cell A) has 9+2 microtubule arrangement in its flagellum. B) has a mitochondrion. C) has a cell wall. D) lives in an extreme environment. E) has cilia