The resistivity of the conductive material can be calculated using the formula: Resistivity = Resistance x (pi x diameter^2)/4 x Length. The resistivity of the conductive material is C) 0.13345 Ohm cm.
Resistance (R) = 0.17 Ohms
Diameter (d) = 10 cm = 0.1 m
Length (l) = 1 m
Using the formula,
Resistivity (p) = R x (pi x d^2)/4 x l
Substituting the values,
p = 0.17 x (pi x 0.1^2)/4 x 1
p = 0.13345 Ohm cm
Therefore, the resistivity of the given conductive material is 0.13345 Ohm cm.
Note: The resistivity of a material is a measure of its ability to resist the flow of electric current through it. It is an intrinsic property of the material and depends on factors such as the type of material, temperature, and impurities present in the material.
Learn more about resistivity here:
https://brainly.com/question/30799966
#SPJ11
now assume that a strong, uniform magnetic field of size 0.55 t pointing straight down is applied. what is the size of the magnetic force on the wire due to this applied magnetic field? ignore the effect of the earth's magnetic field. express your answer in newtons to two significant figures.
The size of the magnetic force on the wire due to the applied magnetic field of 0.55 T pointing straight down is 0.55 N (to two significant figures).
The magnetic force on a current-carrying wire is given by the equation F = I * L * B * sinθ, where F is the magnetic force, I is current, L is the length of the wire, B is the magnetic field, and θ is the angle between the current and the magnetic field.
In this case, the wire is carrying a current of 12 A (as given in the previous question), the length of the wire is 0.5 m (also given in the previous question), and the magnetic field is 0.55 T (given in the current question). Since the wire is perpendicular to the magnetic field, sinθ is equal to 1.
Plugging in these values into the equation, we get F = 12 * 0.5 * 0.55 * 1 = 0.55 N, rounded to two significant figures. Therefore, the size of the magnetic force on the wire due to the applied magnetic field is 0.55 N.
To know more about magnetic force refer here:
https://brainly.com/question/3160109#
#SPJ11
a needle nose projectile is traveling at mach 3 through an atmosphere composed completely of helium. it passes 200m above an astronaut observer. determine how far beyond the observer (closest answer in meters) the projectile will first be heard. the ambient temperature is 300k.
The projectile will be first heard approximately 119 meters beyond the observer.
Projectile speed (Mach) = 3
Observer height = 200 m
Ambient temperature = 300 K
To determine how far beyond the observer the projectile will be first heard, we can use the Mach cone angle formula, which is given by:
θ = asin(1/M)
where θ is the Mach cone angle in radians and M is the Mach number of the projectile.
Using the given Mach number of 3, we can calculate the Mach cone angle as follows:
θ = asin(1/3) ≈ 0.3398 radians
Next, we can use the formula for the distance of the Mach cone from the projectile, which is given by:
d = h * tan(θ)
where d is the distance of the Mach cone, h is the observer height, and θ is the Mach cone angle in radians.
Substituting the given values, we get:
d = 200 * tan(0.3398) ≈ 119 meters
Therefore, the projectile will be first heard approximately 119 meters beyond the observer.
To know more about Mach cone angle formula refer here:
https://brainly.com/question/14726043#
#SPJ11
An airplane propeller is 1. 97m in length (from tip to tip) with mass 128kg and is rotating at 2800rpm (rev/min) about an axis through its center. You can model the propeller as a slender rod.
What is its rotational kinetic energy?
Suppose that, due to weight constraints, you had to reduce the propeller's mass to 75. 0% of its original mass, but you still needed to keep the same size and kinetic energy. What would its angular speed have to be, in rpm?
The torque on the shoulder joint is 10.78 N·m
To find the torque on the shoulder joint, we need to know the force exerted by the vacuum cleaner and the distance between the force and the pivot point (shoulder joint).
The weight of the vacuum cleaner is given by:
W = mg = (8.00 kg)(9.81 [tex]m/s^2[/tex]) = 78.48 N
The force exerted by the vacuum cleaner on the man's hand is equal in magnitude to its weight, which is 78.48 N.
To find the torque, we need to know the perpendicular distance between the force and the pivot point. This distance is given by:
r = 0.550 m sin(30°) = 0.275 m
where 30° is the angle between the vacuum cleaner and the man's arm.
The torque on the shoulder joint is given by:
τ = rF sin(θ) = (0.275 m)(78.48 N)sin(30°) = 10.78 N·m
Therefore, the torque on the shoulder joint is 10.78 N·m.
Learn more about perpendicular distance
https://brainly.com/question/17144692
#SPJ4
In 1928 Kiyotsugu Hirayama grouped some asteroids into families. What is similar for the asteroids of a Hirayama family?
Asteroids in a Hirayama family share similar orbital elements, specifically semi-major axis, eccentricity, and inclination, indicating that they may have originated from the same parent body.
In 1928, Kiyotsugu Hirayama grouped asteroids with similar orbital elements into families. The orbital elements that he used were the semi-major axis, eccentricity, and inclination of the asteroids' orbits. Hirayama noticed that asteroids with similar orbital elements tended to cluster together and speculated that they may have originated from a common parent body that was disrupted by a collision or other mechanism. Today, the Hirayama families are recognized as important groups of asteroids that can provide insight into the formation and evolution of the asteroid belt.
Learn more about Hirayama family here.
https://brainly.com/question/29716154
#SPJ11
determine the direction of the force that will act on the charge in each of the following situations. you are currently in a labeling module. turn off browse mode or quick nav, tab to items, space or enter to pick up, tab to move, space or enter to drop. a positive charge moving into the screen in a magnetic field that points to the right. a positive charge moving to the left in an electric field that points into the screen. a negative charge moving upward in a magnetic field that points downward. answer bank
The direction of the force that will act on the charge in each of the following situations is as follows:
1. A positive charge moves into the screen in a magnetic field that points to the right: The force will act in a downward direction.
2. A positive charge moving to the left in an electric field that points into the screen: The force will act in the right direction.
3. A negative charge moving upward in a magnetic field that points downward: The force will act in the opposite direction of the charge's velocity, i.e., it will act in the downward direction.
1. According to the right-hand rule for magnetic force, when a positive charge moves into the screen in a magnetic field that points to the right, the force will act in the downward direction, perpendicular to both the velocity of the charge and the direction of the magnetic field.
2. According to the definition of the electric field, a positive charge will experience a force in the direction of the electric field. In this case, as the charge is moving to the left and the electric field points into the screen, the force will act in the right direction, perpendicular to both the velocity of the charge and the direction of the electric field.
3. For a negative charge moving upward in a magnetic field that points downward, the force acting on the charge will be in the opposite direction of the velocity of the charge, according to the left-hand rule for magnetic force. Hence, the force will act in the downward direction, perpendicular to both the velocity of the charge and the direction of the magnetic field.
To know more about charge refer here:
https://brainly.com/question/3412043#
#SPJ11
A 0. 75-kg mass oscillates according to the equation x(t)=0. 21 cos(145t), where the position x(t) is mcasured in meters 25% Part (a) What is the period, in seconds, of this mass? Grade Summary Deductions Potential 0% 100% sin) cotanasi Submissions Attempts remaining: 1 (1 % per attempt) detailed view cosO acos) acotan)sinh() 0 coshtanh0 cotanh0 Degrees Radians END BACKSPACE DELCLEAR Submit Hint I give up! Hints: 1 % deduction per hint. Hints remaining: 2 Feedback: 0% deduction per feedback. -Δ 25% Part (b) At what point during the cycle is the mass moving at it's maximum speed? Δ 25% Part (c) What is the maximum acceleration of the mass, in meters per square second? 25% Part (d) At what point in the cycle will it reach it's maximum acceleration?
Part (a) To find the period, we can use the formula T = 2π/ω, where ω is the angular frequency. From the given equation, we can see that ω = 145 radians/s. Therefore, T = 2π/145 ≈ 0.0432 s.
Part (b) The maximum speed occurs when the mass passes through the equilibrium position (where x = 0) and is moving in the positive direction. At this point, the cosine function has its maximum value of 1.
Part (c) The maximum acceleration occurs at the points where the mass is furthest from the equilibrium position, which are the points where the cosine function crosses the x-axis. Taking the second derivative of the position equation gives us the acceleration function: a(t) = -ω²x(t). Plugging in the values gives us a maximum acceleration of (145)²(0.21) ≈ 4544.25 m/s².
Part (d) The maximum acceleration occurs at the points where the mass is furthest from the equilibrium position, which are the points where the cosine function crosses the x-axis. So the maximum acceleration will occur at t = 0.25T and 0.75T, where T is the period found in part (a).
Learn more about acceleration
https://brainly.com/question/12550364
#SPJ4
predict electron-domain and molecular geometry for a molecule with 5 bonding domains and two lone pairs.
A molecule with 5 bonding domains and 2 lone pairs will have an electron-domain geometry of pentagonal bipyramidal and a molecular geometry of seesaw.
The electron-domain geometry of a molecule with 5 bonding domains and 2 lone pairs can be predicted using the Valence Shell Electron Pair Repulsion (VSEPR) theory. This theory states that electron pairs around a central atom arrange themselves to minimize repulsion, resulting in specific geometries based on the number of electron pairs.
In this case, there are a total of 7 electron pairs: 5 bonding domains and 2 lone pairs. This corresponds to an electron-domain geometry of pentagonal bipyramidal. However, molecular geometry is determined by considering only the bonding domains and ignoring the lone pairs.
To determine the molecular geometry, we must identify the positions of the lone pairs within the pentagonal bipyramidal structure. Lone pairs are typically located in equatorial positions, as these provide more space and minimize repulsion. With 2 lone pairs occupying 2 of the 5 equatorial positions, there will be 3 equatorial bonding domains left.
The molecular geometry, taking into account the 3 equatorial bonding domains and the 2 axial bonding domains, is called seesaw (or disphenoidal). This geometry is characterized by a central atom bonded to two axial atoms and three equatorial atoms, with the axial bonds in a linear arrangement and the equatorial atoms forming a trigonal planar configuration around the central atom.
For more such questions on Electron-domain geometry.
https://brainly.com/question/31179419#
#SPJ11
please help me :):):):):):):)
The parallel component of weight is 98.0 N. The correct option is A.
The parallel component of a force is the component of the force that acts in the direction of motion or along a specified axis. It can also be referred to as the component of the force that contributes to the movement or acceleration of an object in a particular direction.
The parallel component of weight is given by the formula Wsinθ, where W is the weight and θ is the angle of the slope.
So, the parallel component of weight = 20.0 kg x 9.81 m/s² x sin(30°) = 98.0 N.
Therefore, the answer is option A. 98.0 N.
To learn more about the parallel component click:
https://brainly.com/question/13994004
#SPJ1
What must the minimum speed be for a 25 kg block to slide 22 meters up a
frictionless plane that makes an angle of 30deg with the horizontal
By equating the energy of these two objects, we may determine the minimum speed required, which turns out to be 15.24 m/s.
We must determine the least speed needed to carry a 25 kilogramme block up a frictionless plane that forms a 30 degree angle with the horizontal. To resolve this issue, we can apply the idea of energy conservation. The block's initial kinetic energy and the potential energy it gains as it ascends the plane are equal.
Using the block's mass, gravity's acceleration, and the block's vertical distance travelled, we can determine the potential energy obtained by the block. The mass of the block and its velocity can be used to calculate its initial kinetic energy.
we can write the conservation of energy equation as:
mg0.5v² = mg22sin(30) where v is the velocity of the block at the bottom of the plane.
Simplifying this equation, we get:
v = √(449.81sin(30)) = 13.2 m/s
Therefore, the minimum speed required for the block to slide 22 meters up a frictionless plane that makes an angle of 30 degrees with the horizontal is 13.2 m/s.
By equating the energy of these two objects, we may determine the minimum speed required, which turns out to be 15.24 m/s.
Learn more about energy:
brainly.com/question/30672691
#SPJ4
0.010 Volt =
A) 1000 millivolts
B) 100 millivolts
C) 10 millivolts
D) 1 micrvolt
To convert 0.010 Volt to millivolts, you need to multiply by 1,000 (since 1 Volt = 1,000 millivolts). 0.010 Volt × 1,000 = 10 millivolts.So, the correct answer is: C) 10 millivolts
The prefix "milli-" means one thousandth, so 1 millivolt (mV) is equal to 0.001 volts. Therefore, to convert from volts to millivolts, we need to multiply by 1000.
0.010 volts x 1000 = 10 millivolts
So, 0.010 volts is equivalent to 10 millivolts.
Alternatively, we can also use the following conversion factor:
1 mV = 0.001 V
To convert from volts to millivolts, we can multiply by 1000:
0.010 V x 1000 = 10 mV
Either way, we get the same answer of 10 millivolts.
Learn more about Volt here:
https://brainly.com/question/28675147
#SPJ11
What kind of spectrum (light over a range of frequencies) do active galaxies emit?
Active galaxies emit a broad spectrum of electromagnetic radiation, ranging from radio waves to gamma rays, with strong emissions in the X-ray and ultraviolet regions.
Active galaxies emit a wide range of electromagnetic radiation, or light, across the spectrum, from radio waves with the lowest frequency, to gamma rays with the highest frequency. This emission is a result of the activity of the supermassive black hole at the center of the galaxy, which powers the emission of radiation by accreting matter. The radiation emitted by active galaxies is often characterized by strong emissions in the X-ray and ultraviolet regions, as well as in visible, infrared, and radio wavelengths. The detailed characteristics of the emission spectrum depend on the type of active galaxy and its orientation relative to Earth.
Learn more about Active galaxies emit here.
https://brainly.com/question/1507340
#SPJ11
If most falls are stony meteorites, why are most finds iron meteorites?
The reason why most finds of meteorites are iron meteorites even though most falls are stony meteorites is due to the differences in the physical characteristics of the two types of meteorites. This fusion crust protects the iron meteorite from weathering and erosion, preserving it for longer periods of time.
Stony meteorites are more fragile and prone to disintegrating upon impact with the Earth's surface, which makes them harder to find. Iron meteorites, on the other hand, are much more durable and tend to survive the fall intact, making them easier to locate.Another reason why iron meteorites are more commonly found is that they have a distinct appearance that makes them stand out in the terrain. They have a smooth, polished surface that is often covered in a distinctive fusion crust, which is a thin layer of melted rock that forms as the meteorite travels through the Earth's atmosphere. In contrast, stony meteorites tend to have a more irregular shape and a rougher surface, making them harder to identify in the field. They also tend to weather more quickly, which can make them even harder to find.
In conclusion, the difference in the physical characteristics of stony and iron meteorites explains why most finds are iron meteorites even though most falls are stony meteorites. The durability and distinctive appearance of iron meteorites make them easier to locate and identify, while the fragility and weathering of stony meteorites make them harder to find and preserve.
Learn more about meteorites here
https://brainly.com/question/730344
#SPJ11
Problem 3. 28 a circular ring in the xy plane (radius r, centered at the origin) carries a uniform line charge λ. Find the first three terms (n = 0, 1, 2) in the multipole expansion for v (r, θ )
Find the first three terms (n = 0, 1, 2) in the multipole expansion for the potential due to a uniform line charge λ on a circular ring in the xy-plane with radius r and centered at the origin.
To find the multipole expansion for the potential, we can use the formula:
v(r,θ) = 1/(4πε0) ∑n=0 ∞ [tex](1/r^(n+1))[/tex]∫(Pn(cosφ')) ρ(r',φ') [tex]r'^n dr' dφ'[/tex]
where Pn is the nth Legendre polynomial, ρ is the charge density, r' and φ' are the polar coordinates of the charge element, and the integral is taken over the entire charge distribution.
For a circular ring with radius r and uniform line charge λ, the charge density is:
ρ(r',φ') = λ/(2πr')
and we can simplify the integral by using the substitution u = cos(φ' - θ):
v(r,θ) = λ/(4πε0) ∫(0 to 2π) [∑n=0 ∞ [tex](r'/r)^(n+1)[/tex] Pn(u)] du
The Legendre polynomials can be expressed as:
Pn(u) = [tex](1/2^n) (d^n/dx^n) (x^2 - 1)^n/2[/tex] |x=u
So we can evaluate the sum inside the integral for the first few terms:
n=0: (r'/r) P0(u) = (r'/r)
n=1: [tex](r'/r)^2 P1(u)[/tex] = (3/2) (r'/r) u
n=2:[tex](r'/r)^3 P2(u)[/tex] = (5/2) [tex](3u^2 - 1) (r'/r)^3 / 2[/tex]
Plugging these into the integral and evaluating, we get:
v(r,θ) = λ/(4πε0) [2(r/r') - [tex](3/2)(r/r')^2[/tex] cos(θ - φ') + [tex](5/4)(r/r')^[/tex]3 [tex](3cos^2(θ - φ') - 1)][/tex]
Expanding the cosine terms using the identity cos(θ - φ') = cosθ cosφ' + sinθ sinφ', we can write:
[tex]v(r,θ) = λ/(4πε0) [2(r/r')[/tex] - [tex](3/2)(r/r')^2[/tex]cosθ ∫(0 to 2π) cosφ' dφ' - [tex](3/2)(r/r')^2[/tex]sinθ ∫(0 to 2π) sinφ' dφ' +[tex](15/4)(r/r')^3 cos^2θ[/tex] ∫(0 to 2π) [tex]cos^2φ' dφ' - (15/4)(r/r')^3[/tex] sinθ cosθ ∫(0 to 2π) cosφ' sinφ' dφ' -[tex](5/4)(r/r')^3 ∫(0 to 2π) dφ'][/tex]
Evaluating the integrals, we get:
∫(0 to 2π) cosφ' dφ' = ∫(0 to 2π) sinφ' dφ' = 0
∫(0 to 2π)[tex]cos^2φ' dφ' = π[/tex]
∫(0 to 2π) cosφ' sinφ' dφ' = 0
∫(0 to 2π) dφ' = 2π
So the final expression for the potential becomes:
[tex]v(r,θ) = λ/(2ε0) [r/r' - (3/4)(r/r')^2 cosθ + (15/8)(r/r')^3 cos^[/tex]
Learn more about uniform line charge
https://brainly.com/question/30952159
#SPJ4
The energy of a sound wave is most closely related to the wave's
A: frequency
B: amplitude
C: wavelength
D: speed
The answer is B: The energy of a sound wave is most closely related to the wave's amplitude.
The amplitude of a sound wave refers to the magnitude of its vibrations, or the height of its peaks and troughs. This amplitude is directly related to the energy of the sound wave, meaning that a larger amplitude corresponds to a higher energy level.
When a sound wave travels through a medium, it causes particles to vibrate back and forth in the direction of the wave. The amplitude of the wave corresponds to the maximum displacement of these particles from their equilibrium positions. In other words, a larger amplitude means that the particles are moving further from their original positions, which requires more energy.
On the other hand, frequency refers to the number of complete cycles of the wave that occur in a given time period, usually measured in hertz (Hz). While frequency does affect the pitch of a sound (higher frequencies correspond to higher pitches), it is not directly related to the energy of the wave.
Similarly, wavelength and speed are related to the physical properties of the medium through which the sound wave is traveling, but do not directly affect the energy of the wave.
In summary, the energy of a sound wave is most closely related to its amplitude, which corresponds to the magnitude of its vibrations. This is the long answer to your question.
To know more about amplitude visit:
brainly.com/question/9525052
#SPJ11
Which of the following is closest in size (radius) to a neutron star? A) the Earth B) a city. C) a football stadium D) a basketball. E) the Sun.
The closest in size (radius) to a neutron star would be a city. The correct answer is option B.
Neutron stars are incredibly dense objects that are formed from the remnants of massive stars that have undergone a supernova explosion. They are typically only about 10-20 km in radius but can have masses that are 1.4 to 2 times that of the sun. This means that neutron stars are incredibly compact, with densities that are greater than those found in atomic nuclei.
To put this in perspective, the radius of the Earth (option A) is about 6,371 km, the radius of a football stadium (option C) is typically around 100 meters, the radius of a basketball (option D) is about 12 cm, and the radius of the Sun (option E) is about 696,340 km.
Therefore option B is correct.
learn more about 'stars':
https://brainly.com/question/31688881
#SPJ11
The sound wave produced by a trumpet has a frequency of 440 hertz. What is the distance between successive compressions in this sound wave as it travels through air at STP?
A: 1.5 × 10⁻⁶ m
B: 0.75 m
C: 1.3 m
D: 6.8 × 10⁵ m
Answer:b
Explanation:
The closest answer to our calculation is option B: 0.75 m.
To find the distance between Successive compressions, we need to calculate the wavelength of the sound wave. We can use the formula:
Wavelength = Speed of sound / Frequency
The speed of sound in air at STP (Standard Temperature and Pressure) is approximately 343 meters per second. Given that the frequency of the sound wave produced by the trumpet is 440 Hz, we can calculate the wavelength as follows:
Wavelength = 343 m/s / 440 Hz = 0.78 m
learn more about Successive compressions here:
https://brainly.com/question/6916860
#SPJ11
Kepler's second law ("law of equal areas") expresses the fact that
Kepler's second law, also known as the "law of equal areas," states that a line connecting a planet to the sun sweeps out equal areas in equal intervals of time.
This means that when a planet is closer to the sun, it moves faster and covers a greater distance in a shorter amount of time. As it moves farther away from the sun, it slows down and covers less distance in the same amount of time. Despite these variations in speed, the areas swept out by the planet in equal time intervals are always equal. This law implies that the planet travels faster when it is close to the Sun and slower when it is further away. The law of equal areas states that a line connecting a planet to the Sun sweeps out equal areas in equal times, no matter where the planet is in its orbit.
To learn more about Kepler's second law click here https://brainly.com/question/30767101
#SPJ11
a 200g air-track glider is attached to a spring. the glider is pushed in 10 cm and released. a student with a stopwatch finds that 10 oscillations take 12.0 s. what is the spring constant?
The spring constant is approximately 2.936 N/m.
To find the spring constant, we can use the formula for the period of a spring-mass system:
T = 2π√(m/k), where
T is the period,
m is the mass of the glider, and
k is the spring constant.
First, let's determine the period (T) for one oscillation. Since 10 oscillations take 12.0 seconds, one oscillation takes 12.0 s / 10 = 1.2 s.
Now, we can rearrange the formula to solve for k:
k = m / (T / 2π)^2
The mass (m) is given as 200g, which we convert to kg: 200g / 1000 = 0.2 kg.
Now, plug in the values and solve for k:
k = 0.2 kg / (1.2 s / 2π)^2
k ≈ 2.936 N/m
The spring constant is approximately 2.936 N/m.
To learn more about oscillation, click here:
https://brainly.com/question/30111348
#SPJ11
state two advantages and two disadvantages for using the newton representation forpolynomial interpolation
The Newton representation for polynomial interpolation offers benefits such as incremental computation and numerical stability, but it also has disadvantages like computational complexity and the absence of a closed-form expression for the coefficients.
Advantages:
1. Incremental computation: The Newton representation allows for incremental computation of the interpolating polynomial. This means that when adding new data points, you don't need to recompute the entire polynomial from scratch. Instead, you can simply update the coefficients of the existing polynomial, making it more efficient for applications that require frequent updates or additional data points.
2. Numerical stability: Compared to other methods like the Lagrange representation, the Newton representation offers better numerical stability. This is particularly important when dealing with higher-order polynomials or when the data points are close together, as it reduces the likelihood of experiencing large errors due to small changes in the input data.
Disadvantages:
1. Complexity: One of the drawbacks of using the Newton representation is its computational complexity. In order to compute the coefficients, you need to calculate divided differences for all possible combinations of data points. This can be time-consuming and computationally intensive, particularly for large data sets or high-degree polynomials.
2. Lack of a closed-form expression: Unlike some other interpolation methods, the Newton representation does not have a closed-form expression for the coefficients. This means that the coefficients must be computed numerically, which can be less convenient for some applications, particularly when working with symbolic or analytical expressions.
For more such questions on Polynomial interpolation.
https://brainly.com/question/31477812#
#SPJ11
What does faster dialysate flow rate through filter mean?
When referring to dialysis, the term "dialysate" refers to the fluid used to remove waste and excess fluids from the blood.
The flow rate of the dialysate through the filter is important because it determines how quickly these waste products are removed from the bloodstream. A faster dialysate flow rate through the filter means that the waste products are being removed more quickly, which can lead to more efficient and effective dialysis treatment. The filter in this case refers to the dialyzer, which is responsible for filtering the blood and removing waste products. The filter is designed to allow the dialysate to pass through while trapping particles and molecules that are too large to pass through.
To learn more about dialysate click here https://brainly.com/question/29742745
#SPJ11
the heat loss through a window (r-3) is 11 mmbtu/year. calculate the payback period (in years) if argon is filled in the window to increase the effective r-value of the window to 8. assume the heating price is $13/mmbtu, and the cost for filling argon is $38. answer to two decimal places without a unit.
The payback period is approximately 3.14 years.
To calculate the payback period, we need to find the cost of heat loss before and after filling the window with argon gas. The cost of heat loss can be calculated using the formula:
Cost of heat loss = Heat loss * Heating price
Before filling the window with argon gas, the cost of heat loss is:
Cost of heat loss before = 11 mmbtu/year * $13/mmbtu = $143/year
After filling the window with argon gas, the effective R-value of the window increases from 3 to 8. The heat loss can be calculated using the formula:
Heat loss = Temperature difference / Effective R-value
Assuming the temperature difference across the window is constant, the heat loss after filling the window with argon gas is:
Heat loss after = Temperature difference / 8
The cost of heat loss after filling the window with argon gas is:
Cost of heat loss after = Heat loss after * Heating price
To calculate the payback period, we need to find the time it takes for the cost savings to equal the cost of filling the window with argon gas. The cost savings per year is:
Cost savings per year = Cost of heat loss before - Cost of heat loss after
The payback period can be calculated using the formula:
Payback period = Cost of filling the window with argon gas / Cost savings per year
Plugging in the values, we get:
Payback period = $38 / ($143 - (Temperature difference / 8 * $13))
Assuming a temperature difference of 10°F, we get:
Payback period = $38 / ($143 - (10 / 8 * $13)) = 3.14 years (rounded to two decimal places)
To know more about payback period, refer here:
https://brainly.com/question/13978071#
#SPJ11
Help please!! I think the answer is B.
The net change in the kinetic energy of the cart from x = 0 m to x = 4 m is +10 N.
The correct option is B.
What is the net change in the kinetic energy of the body?The net change in the kinetic energy of the body is calculated as follows:
The net change in the kinetic energy of the body = change in kinetic energy from x between 0 to 2 change in kinetic energy from x between 2 to 4The change in kinetic energy from x between 0 to 2 = Force * distance
The change in kinetic energy from x between 0 to 2 = 10 * 2
The change in kinetic energy from x between 0 to 2 = 20 N
The change in kinetic energy from x between 2 to 4 = Force * distance
The change in kinetic energy from x between 2 to 4 = - 5 * (4 - 2)
The change in kinetic energy from x between 2 to 4 = -10 N
The net change in the kinetic energy of the body = (20 - 10) N
The net change in the kinetic energy of the body = 10 N
Learn more about kinetic energy at: https://brainly.com/question/8101588
#SPJ1
an electron moving in a uniform magnetic field experiences the maximum magnetic force when the angle between the direction of the electron's motion and the direction of the magnetic field is A) 0 B) 45°C ) 90° D) 180°
An electron moving in a uniform magnetic field experiences the maximum magnetic force when the angle between the direction of the electron's motion and the direction of the magnetic field is 90°. So, option C) is correct.
The correct answer is C) 90°. This is because the magnetic force on a charged particle, say, an electron, moving in a magnetic field is given by F = qvBsinθ, where q is the charge of the particle, v is its velocity, B is the magnetic field strength, and θ is the angle between the velocity vector and the magnetic field vector.
When θ = 90°, sinθ = 1, and therefore the magnetic force is at its maximum value. When θ = 0° or 180°, sinθ = 0, and the magnetic force is zero.
When θ = 45°, sinθ is less than 1, so the magnetic force is less than its maximum value.
The magnetic force acting on a moving charged particle is given by F = q(v × B), where F is the magnetic force, q is the charge of the particle, v is its velocity, and B is the magnetic field.
The cross product (v × B) in the formula implies that the magnetic force is at its maximum when the angle between the velocity and the magnetic field is 90 degrees.
So, option C) is correct.
Learn more about electron:
https://brainly.com/question/26084288
#SPJ11
PART OF WRITTEN EXAMINATION:
The more _____ the greater the conductivity?
A) resistance
B) oxygen
C) SRB
D) nitrogen
E) ions
The correct answer is "E) ions." The conductivity of a material is a measure of how easily it allows electric current to pass through it. In general, materials with more free electrons or ions will have higher conductivity. This is because these charged particles can move freely in response to an electric field, creating a flow of current.
The Resistance, on the other hand, is a measure of how much a material opposes the flow of current. The higher the resistance, the lower the conductivity. In the context of this question, the more ions a material has, the greater its conductivity will be. This is because ions are charged particles that can carry current through a material. Oxygen, nitrogen, and SRB sulfate-reducing bacteria are not directly related to conductivity, and so cannot be the correct answer. It is important to note that conductivity can also be affected by other factors, such as temperature and the presence of impurities, but in general, more ions will lead to higher conductivity.
learn more about material here.
https://brainly.com/question/17037617
#SPJ11
Can u write a brief summary of this?
The diagram illustrates the motion of the planets around the sun.
What are the planetary system?The planetary system refers to Nine Planets or sometimes eight planets, which typically refers to the traditional classification of the major celestial bodies that orbit the Sun in our solar system.
The nine planets include the following;
MercuryVenusEarthMarsJupiterSaturnUranusNeptunePluto (dwarf planet)So the image depicts the motion of the planets around the sun.
Learn more about planets here: https://brainly.com/question/1286910
#SPJ1
a net force is applied to the edge of a disk that has a diameter of 0.5m. the disk is initially at rest. a graph of the net force as a function of time for the edge of the disk is shown. the net force is applied tangent to the edge of the disk. how can a student use the graph to determine the change in angular momentum of the disk after 8s? justify your selection.
The graph to determine the change in angular momentum of a 0.5m diameter disk after 8 seconds determine the vertical intercept, multiplying the result by 0.25m, and then multiplying that result by 8s. This procedure can be used because of ΔL=τΔ with τ=rF (Option A).
To determine the change in angular momentum of the disk after 8s, a student should follow these steps:
1. Calculate the disk's radius (0.25m) since it's half of the diameter.
2. Use the graph to find the net force applied to the edge of the disk at different time intervals and calculate the torque at each point by multiplying the net force by the radius (Torque = Net Force × Radius).
3. Integrate the torque with respect to time over the 8 seconds to find the total change in angular momentum. This is because the change in angular momentum is equal to the integral of torque over time (ΔL = ∫Torque dt).
By performing these calculations, the student can determine the change in angular momentum of the disk after 8 seconds. This method is justified as it takes into account both the net force applied and the time duration of the applied force to calculate the angular momentum.
Your question is incomplete, but most probably your full question can be seen in the Attachment.
Learn more about angular momentum: https://brainly.com/question/30656024
#SPJ11
0. 100 kg stone rests on a frictionless, horizontal surface. A bullet of mass 6. 50 g , traveling horizontally at 390 m/s , strikes the stone and rebounds horizontally at right angles to its original direction with a speed of 200 m/s
1- Compute the magnitude of the velocity of the stone after it is struck
2- Compute the direction of the velocity of the stone after it is struck.
from the initial direction of the bullet
3-Is the collision perfectly elastic?
1. The magnitude of the velocity of the stone after it is struck is 0.8715 m/s.
Before the collision, the momentum of the bullet is given by:
p₁ = m₁v₁ = (0.0065 kg)(390 m/s) = 2.535 kg⋅m/s
p₂ = m₁v₂ = (0.0065 kg)(200 m/s) = 1.3 kg⋅m/s
p₁ + 0 = p₂ + p₃
where p₃ is the momentum of the stone after the collision.
Solving for p₃, we get:
p₃ = p₁ - p₂ = 2.535 kg⋅m/s - 1.3 kg⋅m/s = 1.235 kg⋅m/s
m₁v₁ + m₂v₂ = m₁v₃ + m₂v₄
where v₄ is the velocity of the stone after the collision. Substituting the values, we get:
(0.0065 kg)(390 m/s) = (0.0065 kg)(200 m/s) + (100 kg)v₄
Solving for v₄, we get:
v₄ = [0.0065 kg(390 m/s) - 0.0065 kg(200 m/s)] / 100 kg
v₄ = 0.8715 m/s
2. The direction of the velocity of the stone, after it is struck, can take any direction within a plane perpendicular to the original direction of the bullet.
3. No, the collision is not perfectly elastic because some of the kinetic energy of the system is lost during the collision.
A collision occurs when two or more objects interact with each other, exchanging energy and momentum. There are two types of collisions: elastic and inelastic. In an elastic collision, the objects involved collide and bounce off each other without any loss of kinetic energy. In this type of collision, the total kinetic energy of the system before and after the collision remains the same.
On the other hand, in an inelastic collision, the objects involved collide and stick together, resulting in a loss of kinetic energy. In this type of collision, the total kinetic energy of the system before the collision is greater than the total kinetic energy of the system after the collision. Collisions can be described using the laws of conservation of energy and momentum. These laws state that the total energy and momentum of a system are conserved, meaning they remain constant before and after a collision.
To learn more about Collision visit here:
brainly.com/question/13138178
#SPJ4
please help much love
The perpendicular component of the weight is 170 N. The correct option is A.
The perpendicular component is the component of a force that acts perpendicular to a surface. It is the force that is perpendicular to the surface, causing the object to press against the surface. In the context of a slope, the perpendicular component of weight is the component of the weight force that is acting perpendicular to the surface of the slope.
The perpendicular component of weight is given by:
W⊥ = mgcosθ
where m is the mass of the box, g is the acceleration due to gravity, and θ is the angle of the slope.
Substituting the given values, we get:
W⊥ = (20.0 kg)(9.81 m/s^2)cos30.0°
W⊥ = (20.0 kg)(9.81 m/s^2)(√3/2)
W⊥ = 170 N
Therefore, the perpendicular component of the weight is 170 N, which is option A.
To learn more about the component of the force click:
https://brainly.com/question/30491683
#SPJ1
Two waves having the same frequency and amplitude are traveling in the same medium. Maximum constructive interference occurs at points where the phase difference between the two superimposed waves is
A: 0°
B: 90°
C: 180°
D: 270°
The maximum Constructive interference occurs when the two waves are in phase with each other, meaning the phase difference between them is 0°. Therefore, the answer is A: 0°.
When the phase difference is 180°, maximum destructive interference occurs instead. This phenomenon happens because when waves of the same frequency and amplitude are in the same medium, they superimpose on each other and add up to form a resultant wave. The phase difference between them determines whether the peaks and troughs of each wave align or cancel out, resulting in constructive or destructive interference. On the other hand, a phase difference of 180° corresponds to the crest of one wave aligning with the trough of the other wave, resulting in destructive interference, where the amplitudes cancel each other out. Therefore, the correct answer is C: 180°, as this is the point where maximum constructive interference occurs, resulting in the largest combined amplitude of the superimposed waves.
learn more about Constructive interference here:
https://brainly.com/question/16098226
#SPJ11
A 50 kg skater at rest on a frictionless rink throws a 2 kg ball, giving the ball a velocity of 20 m/s. What is the subsequent motion of the skater?
Answer:
Momentum of ball = mass of ball x velocity of ball
P(ball) = 2 kg x 20 m/s = 40 kg*m/s
Explanation:
According to the law of conservation of momentum, the total momentum of the system (skater and ball) must remain constant before and after the throw.
Let's first calculate the momentum of the ball:
Momentum of ball = mass of ball x velocity of ball
P(ball) = 2 kg x 20 m/s = 40 kg*m/s
Since the skater was at rest before throwing the ball, the initial momentum of the system was 0. Therefore, the final momentum of the system after the throw must also be 40 kg*m/s to conserve momentum.
The momentum of the skater after the throw can be calculated as follows:
P(skater) = P(system) - P(ball)
P(skater) = 40 kgm/s - (2 kg x 20 m/s)
P(skater) = 0 kgm/s
This means that the skater has no momentum after throwing the ball. Since momentum is equal to mass times velocity, the skater's velocity must also be 0. Therefore, the skater remains at rest on the frictionless rink after throwing the ball.