Since chloride ions are not part of the ionic equilibrium, addition of chloride ions will only increase the concentration of the anions in the solution.
What is ionic equilibrium?An ionic equilibrium is an equilibrium that exists between two or more ions in an aqueous solution.
The ionic equilibrium between iron (iii) ion and thiocyanate ions is given below:
[tex]Fe^{3+}\rightleftharpoons SC \: N^{-}[/tex]
From the principle of equilibrium, addition of either ions in the ionic equilibrium will alter equilibrium position to the left or right.
Addition of chloride ions, Cl- which is not a part of the ionic equilibrium will only increase the concentration of the anions in the solution.
Learn more about ionic equilibrium at: https://brainly.com/question/13879496
The chloride ions are not part of the ionic equilibrium, adding them to the solution will merely raise the concentration of anions.
What is equilibrium?When a chemical reaction does not convert all reactants to products, it reaches equilibrium. Many processes attain a state of balance, or dynamic equilibrium, in which both reactants and products are present.
The following is the ionic equilibrium between iron (III) ion+ and thiocyanate ions:
[tex]\rm Fe^{3+} \rightleftharpoons SC \ N^{-}[/tex]
The addition of either ion in the ionic equilibrium will shift the equilibrium position to the left or right, according to the principle of equilibrium.
The inclusion of chloride ions, Cl-, which are not components of the ionic equilibrium, increases the levels of anions in the solution.
Thus, the chloride ions are not part of the ionic equilibrium, adding them to the solution will merely raise the concentration of anions.
Learn more about the equilibrium here:
https://brainly.com/question/13458865
#SPJ4
A bottle of soda always has a space between the cape and the top of the liquid. Explain
Answer:
All soft drinks contain water. When soft drink bottles are chilled in sub-zero temperatures, the water on account of its anomalous expansion expands. Thus, to provide space for expanding water, soft drink bottles are not completely filled as otherwise they will burst.
Explanation:
Answer:
Soft drink bottles are filled leaving some space between the lid/cap and the liquid level.
Explanation:
The reason is that the soft drinks are cooled below room temperature. Sometimes they are kept in the hot Sun and weather. They are subject to a big temperature variation. Also, there are gases like CO2 mixed in the drink. So the gases come out of the liquid and expand due to heat. That creates high pressure.
Water expands when it is cooled to 4 deg. C. But the bottle (glass) contracts when it is cooled. So if there is no air gap, then volume of water (cool drink) will become more than the inside volume of the bottle. Then the bottle will break due to pressure from water expansion around 8 deg. to 4 deg.C.
When a bottle is opened, due to pressure difference, and temperature difference, the gases come out of drink in the form of bubbles. So cold drink overflows out.
Also, the soft drink bottles are capped tightly. When an opener is used to open it using some force upwards, the pulling force also moves the soft drink bottle upwards. So just after the lid comes off, the top part of the drink comes out due to the pull. So some drink spills on people who open or, it falls outside.
In order to prevent these problems, some gap is left open between the surface of the soft drink and the top of the bottle.
Hello~
Which of the following produces least friction?
(a) Sliding friction
(b) Rolling friction
(c) Composite friction
(d) Static friction
Answer:
Rolling friction
Explanation:
When a object rolls down the all sides of object comes contact to under surface for very low timeFor which the friction decreases .Option B is correct
Which is the destructive interference formula for diffraction grating problems? dsin = dcos = dcos = n dsin = n.
The destructive interference formula for diffraction grating problems is [tex]d sin \theta = (n+\frac{1}{2})\lambda[/tex].
What is the definition of destructive interference?Destructive interference happens when the maxima of two waves are 180° out of phase a positive displacement of one wave is canceled exactly by a negative displacement of the other wave.
The formula for brighter patches resulting from constructive interference and darker patches resulting from destructive interference in a diffraction grating is:
[tex]\rm d sin \theta = n \lambda[/tex]
The grating spacing is denoted by d, the angle of light is denoted by a the fringe order is denoted by n, and the wavelength is denoted by [tex]\rm \lambda[/tex].
The destructive interference formula is now based on the fact that destructive interference occurs between the fringes.
Hence the destructive interference formula for diffraction grating problems is [tex]d sin \theta = (n+\frac{1}{2})\lambda[/tex].
To learn more about destructive interference refer to the link;
https://brainly.com/question/16098226
Answer:
A. dsin =
Explanation:
A 1000 kg rocket carrying 25 kg of fuel and oxygen rises at a velocity of 305 m/s. If all the mass of fuel and oxygen is burned to form gases of combustion, what is the downward velocity of these gases?
If all the mass of fuel and oxygen is burned to form gases of combustion, the downward velocity of these gases would be 12,505 m/s.
Conservation of linear momentumThe principle of conservation of linear momentum states that, the total momentum of an isolated system is constant.
The downward velocity of thes gases is calculated as follows;
v1(m1 + m2) = v2(m2)
305(1000 + 25) = v2(25)
312,625 = 25v2
v2 = 312,625/25
v2 = 12,505 m/s
Thus, If all the mass of fuel and oxygen is burned to form gases of combustion, the downward velocity of these gases would be 12,505 m/s.
Learn more about linear momentum here: https://brainly.com/question/7538238
Which characteristic is common to the four outer planets in our solar system?.
Answer: They Are all gas giants.
Explanation:
25. How long does it take a child on a swing to complete one swing if her center of gravity is 4.00 m below the pivot?
Please include all of your steps with the solution.
[tex]\\ \rm\rightarrowtail T=2\pi\sqrt{\dfrac{l}{g}}[/tex]
[tex]\\ \rm\rightarrowtail T=2\pi\sqrt{\dfrac{4}{9.8}}[/tex]
[tex]\\ \rm\rightarrowtail T=2\pi(0.63887)[/tex]
[tex]\\ \rm\rightarrowtail T=1.27774\pi [/tex]
[tex]\\ \rm\rightarrowtail T=4.012s[/tex]
Do tuning forks make sounds when hit from the vibrations? I'll give brainiest
Answer:
Yes
Explanation:
they make sound due to the fact that the vibration from the tuning fork itself interacts with the air around it. it's also worth mentioning that anything that vibrates creates sound waves as well.
Is the moons diameter about the same as the United States
Answer:
the Moon is smaller in diameter than the United States
however. The United States is 2,545 km / 1,582 mi from north to south, and thus, the Moon is smaller across than the United States is wide.
Answer:
The moon is smaller than the earth.
Explanation:
Moon's Diameter is 2,159.1 mi
Earth's Diameter is 7,917.5 mi
A car with a mass of 1,500 kg accelerates at a rate of 3.0
/s2 forward. What is the force acting on the car? Show work.
Answer:
4500 N
Explanation:
F = ma
= 1500 kg * 3 m/s^2 = 4500 N
edited to correct units !
According to Newton's second law for rotational motion, an object's angular
acceleration equals the
(A) net torque multiplied by the moment of inertia.
(B) net moment of inertia divided by the net torque.
(C) net torque divided by the moment of inertia.
(D) net torque added to the moment of inertia.
Answer:
C: Net Torque divided by Moment of Inertia
Explanation:
Torque = Moment of Inertia x Angular Acceleration.
According to Newton's second law for rotational motion, an object's angular acceleration equals the net torque multiplied by the moment of inertia, not divided by it. The correct answer is (A)
Mathematically, it can be expressed as:
Angular acceleration (α) = (Net torque (τ) / Moment of inertia (I))
Where:
α = angular acceleration (measured in rad/s²)
τ = net torque (measured in Nm or kgm²/s²)
I = moment of inertia (measured in kgm²)
This equation shows that the angular acceleration of an object is equal to the net torque applied to it divided by its moment of inertia. So, the correct answer is (A) net torque multiplied by the moment of inertia.
To summarize, Newton's second law for rotational motion states that the angular acceleration of an object is directly proportional to the net torque applied to it and inversely proportional to its moment of inertia. The moment of inertia represents an object's resistance to changes in its rotational motion, while the net torque represents the total rotational force acting on the object.
To know more about Newton's second law:
https://brainly.com/question/34706880
#SPJ3
A 50,0 g silver spoon at 20.0°C is placed in a cup of coffee at
90.0°C. How much heat does the spoon absorb from the coffee to
reach a temperature of 89.0°C?
The heat capacity of the silver spoon at the given temperature difference is 817.65 J.
Heat capacity of the silver spoon
The heat capacity of theb silver spoon is the quantity of heat absorbed by the silver spoon. The heat capacity of the silver spoon at the given temperature difference is calculated as follows;
Q = mcΔθ
where;
m is mass of the spoonc is specific heat capacity of silver = 0.237 J/g⁰CΔθ is change in temperatureQ = 50 x 0.237 x (89 - 20)
Q = 817.65 J
Thus, the heat capacity of the silver spoon at the given temperature difference is 817.65 J.
Learn more about heat capacity here: https://brainly.com/question/16559442
Why a surface that always have a perpendicular is an equipotential
Use F = 1/T as your basis:
8. If your heart rate is 150 beats per minute during strenuous exercise, what is the time per beat in units of seconds?
The answer is 0.400 s/beats but please show your work.
Heart rate is given by
150beats/minConvert to per second
150/60=5/2=2.5beats/sNow
Frequency:-
[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{T}[/tex]
[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{2.5}[/tex]
[tex]\\ \rm\rightarrowtail \nu=0.4Hz[/tex]
Un motor eléctrico consume 10A de corriente de un circuito de 120v. Calcular la potencia y el trabajo que suministra al motor durante 5hrs de funcionamiento:
A) P=0.9 kw, T=6 kwh
B) P=0.85 kw, T=4 kwh
C) P=1.2 kw, T=3 kwh
D) P=1.2 kw, T=6 kwh
Answer:
D. P=1.2 kw, T=6kwh
Explanation:
P = A × V
P = 120×10
= 1200 watts or 1.2 kw
T = Watts × hr
1000
= 1200 × 5
1000
= 6 kwh
A compound wall consists of parallel layers of two different materials, 10 cm of brick and 2 cm of wood. If the difference of temperature across the brick wall is 20° C calculate the temperature difference between the wooden wall and heat current per square metre of the wall. [Thermal conductivity of brick and wood are respectively 0.5Wm-K- and 0.125Wm-'K']
The temperature difference between the wooden wall is 16⁰C, and the heat current per square metre of the wall is 7,325 W/m².
Temperature difference between the wooden wallThe temperature difference between the wooden wall is calculated as follows;
Let the brick wall = wall ALet the wooden wall = wall BLet the area of the walls = A[tex]\frac{dQ_A}{dt } = \frac{dQ_B}{dt} \\\\\frac{K_A \Delta T_A \times A}{L_A} = \frac{K_B \Delta T _B \times A}{L_B}\\\\\frac{K_A \Delta T_A }{L_A} = \frac{K_B \Delta T _B}{L_B}\\\\\frac{0.5 \times 20}{0.1} = \frac{0.125 \times \Delta T _B }{0.02} \\\\100 = 6.25\Delta T _B\\\\\Delta T _B = \frac{100}{6.25} \\\\\Delta T _B = 16 \ ^oC[/tex]
Heat flowing in the wallsQ = KL(ΔT)
Q = 0.5 x 0.1 x (20 + 273)
Q = 14.65 W
Heat current per square meter of the WallsQA = W/A
QA = (14.65)/A
Let the area of the wall = 10 cm x 2 cm = 0.1 m x 0.02 m = 0.002 m².QA = 14.65/0.002
QA = 7,325 W/m²
Learn more about thermal conductivity here: https://brainly.com/question/11213835
The particles in a balloon push out on the sides of the balloon. What is the reaction force?
A. The balloon wall pushes the enclosed air particles inwards.
B. The string of the balloon on the particles in the environment.
C. There are no forces involved in a balloon filled with air.
A car is traveling in a race. The car went from the initial velocity of 35 m/s to the final velocity of 65 m/s in 5 seconds
What is the acceleration?
- 13 m/s
om/
6 m/s
13 m/s
Answer:
6m/s
Explanation:
a = (v-u)/t
acceleration, a
initial velocity, u
final velocity, v
time, t
substitute values and you'll get the answer
Answer:
6 m/s
Explanation:
A particular circuit is made up of a battery, a switch, a buzzer, and wires connecting the components. All of the components
e in working order, but the buzzer does not make noise. Which statement explains this observation? (1 point)
The circuit lacks a power source.
The load cannot convert electrical energy
The switch is open
The conductors are not attached
If the buzzer in this connection fails to make a sound, it follows that the switch or the key is open.
What is a circuit?A circuit is a path designed for the flow of current. We have to take note of the fact that the switch or key must be closed before electric current can pass through the circuit and the buzzer will make a sound.
Therefore, were the buzzer in this connection fails to make a sound, it follows that the switch or the key is open.
Learn more about a switch: https://brainly.com/question/9431503?
Answer:
C
- CONNECTIONS
--------------------------------
much love! <33
4. The splashing of a liquid resembles an oscillation. The restoring force in this scenario will be due to which of the following?
Potential energy
Kinetic energy
Gravity
Mechanical energy
Please show all of your work.
Gravity
when liquid splashed and is at the top, the force bringing the liquid back down to the midpoint is gravity. This brings the liquid back to its equilibrium level.
Answer:
Gravity
Explanation:
The splashing of liquid resembles like an oscillation .
The force acting on liquid to pull it down is gravity and the force bouncing it back is caused by normal reaction
Hence gravity is the answerWhat happens to force if you decrease the charge on one of two charges?
Answer:
This repulsion would be reduced to one-quarter of its former value.
Explanation:
hope this helps. (MARK ME BRAINLIEST, please.)
Two pistons are in an enclosed volume with fluid in between them, such that
movement in one piston affects the location of the other piston, as shown in
the image below. If an explosion occurs in the piston on the left such that it
moves 1 m, what is the distance that the piston on the right will move
(assuming that friction can be neglected)? (Recall that work on an object is
equal to the force on the object times the distance it is moved, and that work
is conserved.)
Cross-sectional area - 25 mm
Cross-sectional area = 0,5 m
A. 2 m
B. 0.5 m
C. 1 m
D. 0.25 m
Answer:
The pressure in the fluid just below Piston 1 is
p_1=F_1/A_1=361\text{ Pa}.p
1
=F
1
/A
1
=361 Pa.
The pressure in the fluid just below Piston 2 is the same according to Pascal's law:
p_2=p_1=361\text{ Pa}.p
2
=p
1
=361 Pa.
The force being exerted on Piston 2 to keep the two pistons in equilibrium is
F_2=p_2A_2=330\text{ N}.F
2
=p
2
A
2
=330 N.
Explanation:
While on an ice-fishing trip, you find yourself holding a 10 kg fish but stuck in the middle of
the lake. The ice is perfectly smooth and you cannot walk or shuffle your feet towards the
shore. But because you understand Newton's Laws, you are still able to make it back to shore. A
Briefly explain what did you did. Why did it worked? (Please include directional words such as
up/down, towards/away from shore, left/right, etc.)
The forward force you exert on the fish and your backward action will allow you to reach the shore.
Newton's third law of motionNewton's third law of motion states that for every action, there is an equal and opposite reaction.
Fa = -Fb
Let's assume the fish is held in the hook, this will give you the opportunity to throw the fish forward while still holding it.
When the the fish is thrown forward, you will move backwards with an equal force based on Newton's third law. Your backward momentum towards the shore will help to maintain equal linear momentum between you and the fish.
Thus, this forward force of the fish and your backward action will allow you to reach the shore.
Learn more Newton's third law of motion here: https://brainly.com/question/25998091
Electromagnets project student guide
y’all i need helppppo
Answer:
I don't know
Explanation:
you need then search here
In order to compare the two thermal conductivities ,a scientist pours hot water into two beakers .
The two different insulators are wrapped around the beakers . The scientist records the intial temperatures of the hot water
State two further measurements he scientist should make
( if you don’t know please don’t reply )
Answer:
Time domain and frequency domain
Which characteristic is the same for every color of light in a vacuum?.
In a vacuum all colors of light travel with same speed and this is the reason a white ray travels through the vacuum without going through any dispersion..
What is speed?Speed of light is the distance per time light waves propagate through different materials. The value for the speed of light in a vacuum is now defined as exactly 299,792,458 metres per second.
Therefore, In a vacuum all colors of light travel with same speed and this is the reason a white ray travels through the vacuum without going through any dispersion
Learn more about speed of light here.
https://brainly.com/question/104425
Item 1
The figure presents a block on a horizontal surface attached to a horizontal spring. The other end of the spring is attached to a wall. The spring is labeled 50 newtons per meter, and the box is labeled 0.5 kilogram. The horizontal position of the center of spring is x equals negative 0.3 meter. The horizontal position of the center of the box is x equals 0 meters. When the spring is stretched the box will be at a horizontal position of x equals 0.3 meter.
A block of mass 0.5kg on a horizontal surface is attached to a horizontal spring of negligible mass and spring constant 50N/m. The other end of the spring is attached to a wall, and there is negligible friction between the block and the horizontal surface. When the spring is unstretched, the block is located at x=0m. The block is then pulled to x=0.3m and released from rest so that the block-spring system oscillates between x=−0.3m and x=0.3m. What is the magnitude of the acceleration of the block and the direction of the net force exerted on the block when it is located at x=0.3m?
Magnitude of Acceleration Direction of Net Force
30m/s2 Positive
, Magnitude of Acceleration Direction of Net Force 30 meters per second squared Positive
Magnitude of Acceleration Direction of Net Force
30m/s2 Negative
, Magnitude of Acceleration Direction of Net Force 30 meters per second squared Negative
Magnitude of Acceleration Direction of Net Force
0 m/s2 Positive
, Magnitude of Acceleration Direction of Net Force 0 meters per second squared Positive
Magnitude of Acceleration Direction of Net Force
0 m/s2 Negative
Explanation:
No need to calculate the force you can just find by Hookes law
Hookes law states that
F=-kxWhere
F is force ,k is spring constant x is distanceSo
force remains negative as per it
Acceleration=50/0.5÷1/3=100/3=33≈-30m/s²Option B
A thin uniform disk of mass m and radius r has a string wrapped
The magnitude of the weight of the disk is greater than the magnitude of the tension force of the string. ((c) [tex]F_{T} < F_{g}[/tex])
How to analysis a rigid body on dynamical conditionA rigid body is a system whose geometry cannot be neglected and in which deformations due to external forces applied on the system are negligible.
In this question we need to establish a free body diagram with all critical forces and motion conditions. There are two external forces: (i) tension ([tex]F_{T}[/tex]), (ii) weight ([tex]F_{g}[/tex]), both in newtons.
The disk falls due to gravity and rotates around the string in a case of rolling, which combines rotation and translation. By Newton's laws of motion we have the following expression:
[tex]\sum F = -F_{g}+F_{T} = -m\cdot R\cdot \alpha[/tex] (1)
Where:
[tex]m[/tex] - Mass of the disk, in kilograms.[tex]\alpha[/tex] - Angular acceleration, in radians per square second.By algebra we derive the following relationship between the two forces:
[tex]-F_{g} = -F_{T}-m\cdot R\cdot \alpha[/tex]
[tex]F_{g} > F_{T}[/tex]
Therefore, the magnitude of the weight of the disk is greater than the magnitude of the tension force of the string. ((c) [tex]F_{T} < F_{g}[/tex]) [tex]\blacksquare[/tex]
Remark
The statement is incomplete and poorly formatted. Correct and complete form is shown below:
A thin uniform disk of mass m and radius r has a string wrapped around its edge and attached to the ceiling. The bottom of the disk is at height 3R above the floor, as shown above. The disk is released from rest. The rotational inertia of a disk around its center is [tex]I = \frac{1}{2}\cdot M\cdot R^{2}[/tex].
When released from rest, the disk falls and the string unwinds. The force that the string exerts on the disk is [tex]F_{T}[/tex], and the gravitational force exerted on the disk is [tex]F_{g}[/tex]. Which of the following expression correctly relates [tex]F_{T}[/tex] and [tex]F_{g}[/tex] as the disk falls?
(a) [tex]F_{T} > F_{g}[/tex], (b) [tex]F_{T} = F_{g}[/tex], (c) [tex]F_{T} < F_{g}[/tex]
To learn more on rigid bodies, we kindly invite to check this verified question: https://brainly.com/question/7031958
Which property of the sound wave changes when the volume is increased on a radio?.
Answer:
amplitude
Explanation:
When we increase the volume of a sound, the amplitude of the wave is increased. The frequency of a wave is related to its pitch. If the pitch is high, then the frequency of the wave is high. This means that the wave will looked squashed on an oscilloscope trace.
3 Select the correct answer.
Which of the following statements is TRUE? А. Children in the US are generally given the opportunity to play sports in school starting at a young age.
B. The US is one of the few countries to integrate sports into their school systems.
C. Most high schools and colleges in the US have various sport teams.
D. All of the above
Answer:
A,B,C
Explanation:
because that is true
The energy for _____ transport comes from the gradient itself
Answer:
the anwser is atp
Explanation:
To move substances against a concentration or an electrochemical gradient the cell must use energy. This energy is harvested from ATP that is generated through cellular metabolism. Active transport mechanisms, collectively called pumps or carrier proteins work against electrochemical gradients.
The energy for passive transport comes from the gradient itself, in which transfer of a solute from high electrochemical potential to low take place.
What is passive transport?The passive transport is the shifting or transfer of a solute from a place where the electrochemical potential is high to a place where the electrochemical potential is low.
Energy require for passive transport-
Compound moves free from high electrochemical potential to low in memberne.Due to free movement, there in no energy required in passive transport.Thus, the energy for passive transport comes from the gradient itself, in which transfer of a solute from high electrochemical potential to low take place.
Learn more about the passive transport here
https://brainly.com/question/25802833
#SPJ4