Imagine I have a direct mapped cache with 256 bytes per block, 16 sets, and 20 bit addresses. The cache is initialized in the following manner: 1 Set Valid Tag Oxa4 0 1 1 1 Ox4d 2 1 Ox5a 3 0 Ox14 4 0 Ox37 5 1 Ox87 6 1 Oxff 7 1 Oxae 8 1 Oxco 9 0 Oxd1 10 1 Oxe8 11 1 Ox84 12 1 Oxba 13 1 Oxb7 14 0 Ox12 15 1 Ox4f For each of the following addresses, describe if they will be a hit or a miss in the cache by typing 'hit' or 'miss' Ox53c4f will be a Ox12da4 will be a Ox12db5 will be a Oxa4000 will be a Ox5a201 will be a Ox13da4 will be a

To find the node voltage V1, we need additional information such as the circuit diagram, values of resistors, and other components.

Please provide the circuit diagram or a description of the circuit, including the values of resistors and any other relevant components. With this information, I can analyze the circuit and determine the node voltage V1.

Once the circuit information is provided, I will apply appropriate circuit analysis techniques such as Kirchhoff's laws or nodal analysis to solve for the node voltage V1. Please provide the necessary details, and I will be able to assist you further in finding the node voltage V1.

Learn more about information here

https://brainly.com/question/29820635

#SPJ11

The forklift blades should be lowered when stopped or parked. Lowering the blades of a forklift when it is not in use or parked helps ensure safety and prevent potential accidents.

When the blades are lowered, they are kept closer to the ground, reducing the risk of tipping over or causing damage to surrounding objects or structures.

Additionally, lowering the blades also helps maintain stability and balance of the forklift, making it less prone to instability or unexpected movement. It is a standard practice and a safety measure to lower the blades of a forklift when it is not actively engaged in lifting or moving objects.

To learn about Forklift  - brainly.com/question/20386515

#SPJ11

To simplify the given boolean expression f(a, b, c) = (ab'c)', we can apply De Morgan's theorems and other boolean algebra rules.

First, let's apply De Morgan's theorem to the inner expression (ab'c):

(ab'c)' = a' + b + c'

Next, let's apply De Morgan's theorem to the entire expression (a' + b + c'):

f(a, b, c) = (a' + b + c')'

Using De Morgan's theorem again, we can distribute the negation across the terms:

f(a, b, c) = (a')' · (b)' · (c)'

Now, we can simplify further:

(a')' = a

(b)' = b

(c)' = c

Therefore, the simplified expression is:

f(a, b, c) = a · b · c

So, the minimum (simplest) expression for f(a, b, c) is a · b · c.

Learn more about boolean here

https://brainly.com/question/28706924

#SPJ11

To sketch the root locus of the given transfer function P(s) = 1/s(s + 4)(s^2 + 4s + 8), we can analyze the poles and zeros of the system.The transfer function has a pole at s = 0, a pole at s = -4, and complex conjugate poles at s = -2 + 2j and s = -2 - 2j.

To determine the range of K for internal stability, we need to examine the root locus for values of K. As K varies, the root locus plots the locations of the closed-loop poles. For stability, all the poles of the closed-loop system should lie in the left half of the complex plane.To find the value of K for persistent oscillation, we need to find the point on the root locus where the poles are on the imaginary axis. This occurs when the real part of the complex conjugate poles is zero. So, set the real part of the complex poles to zero and solve for K.

Next, to find the frequency of the persistent oscillation, we can use the relation between the complex poles and the frequency of oscillation. The frequency of oscillation is given by the imaginary part of the complex poles.Since the calculations involved in finding the root locus, stability range, and frequency of oscillation are complex and require precise calculations, it would be best to use software tools specifically designed for root locus analysis and control system design. These tools can provide accurate results and graphical representations of the root locus plot.

Learn more about poles here

https://brainly.com/question/14945557

#SPJ11

The die opening should be around 4.4mm to 4.8mm in diameter. A cutting force of 625,000 N is required to cut the part from the 4-mm-thick stainless steel material using the blanking die.

To determine the dimensions of the blanking punch and the die opening, we need to consider the thickness of the material, which is 4-mm-thick stainless steel (half hard). The dimensions of the blanking punch should be slightly larger than the part outline to ensure that it cuts cleanly through the material. Based on the thickness of the material, a clearance of 10-20% of the material thickness is recommended. Therefore, the die opening should be around 4.4mm to 4.8mm in diameter. For the cutting force required, we need to take into account the yield strength of the stainless steel. The cutting force required is equal to the area of the part outline multiplied by the yield strength of the material. Assuming the part outline is a rectangle, we can calculate the area by multiplying the length and width of the part. Let's assume the length is 50mm and the width is 25mm. Therefore, the area of the part is: 50mm x 25mm = 1250mm²
Assuming the yield strength of the stainless steel is 500 MPa, the cutting force required is: 1250mm² x 500 MPa = 625,000 N
Therefore, a cutting force of 625,000 N is required to cut the part from the 4-mm-thick stainless steel material using the blanking die.

To learn more about diameter

https://brainly.com/question/28446924

#SPJ11

The dynamic pressure measured by a Pitot tube is given by the formula:

Dynamic pressure = 0.5 * density * V^2

Where:

Dynamic pressure is given as 540 Pa

Density of air is 1.2 kg/m^3

We can rearrange the formula to solve for the velocity (V):

V^2 = (2 * Dynamic pressure) / density

Plugging in the values:

V^2 = (2 * 540 Pa) / (1.2 kg/m^3)

V^2 = 900 m^2/s^2

Taking the square root of both sides:

V = √900 m^2/s^2

V = 30 m/s

Therefore, the corresponding velocity of the air is 30 m/s.

Learn more about Pitot here

https://brainly.com/question/28463458

#SPJ11

To determine whether a boolean formula is satisfiable, we need to check if there exists a truth assignment to its variables that makes the entire formula evaluate to true. If such an assignment exists, then the formula is satisfiable; otherwise, it is unsatisfiable.

Without knowing the specific boolean formula in question, it is impossible to provide a definitive answer. However, in general, there are several methods for determining the satisfiability of a boolean formula, including brute force enumeration, truth tables, and logical equivalences.

For example, if the boolean formula contains only a few variables and clauses, we can use brute force enumeration to check all possible truth assignments and see if any of them satisfy the formula. This approach becomes impractical for larger formulas, however, since the number of possible truth assignments grows exponentially with the number of variables.Another method is to construct a truth table that lists all possible combinations of truth values for the variables in the formula, and then evaluate the formula under each of these combinations. If the formula evaluates to true for at least one of the truth assignments, then it is satisfiable.

Finally, we can use logical equivalences to simplify the boolean formula and transform it into an equivalent form that is easier to analyze. This can involve applying rules such as DeMorgan's laws, distributivity, and double negation, among others.Once we have determined that a boolean formula is satisfiable, we can find a satisfying assignment by simply listing the truth values for each variable that make the formula evaluate to true. If the formula is unsatisfiable, then no such assignment exists.

Learn more about boolean here

https://brainly.com/question/28706924

#SPJ11

To determine the ideal reverse-saturation current density (J0) of a GaAs pn junction diode, we can use the following equation:

J0 = q * (Dp * Na / tpo + Dn * Nd / tno) * exp(-q * V / (k * T))

Where:

q is the electronic charge (1.6 x 10^-19 C)

Dp is the diffusion coefficient of holes (cm^2/s)

Na is the acceptor concentration (cm^-3)

tpo is the lifetime of minority carriers (s)

Dn is the diffusion coefficient of electrons (cm^2/s)

Nd is the donor concentration (cm^-3)

tno is the lifetime of minority carriers (s)

V is the applied voltage across the junction (V)

k is the Boltzmann constant (8.617 x 10^-5 eV/K)

T is the temperature (K)

exp is the exponential function

Given the parameters:

Nd = 2x10^16 cm^-3

Na = 8x10^15 cm^-3

Dn = 210 cm^2/s

Dp = 8 cm^2/s

tno = 10^-7 s

tpo = 5x10^-8 s

T = 300 K

We can substitute these values into the equation to calculate J0. However, we need to know the applied voltage across the junction (V) in order to compute the reverse-saturation current density accurately. Without the voltage value, we cannot provide a specific numerical answer for J0.

Learn more about junction here

https://brainly.com/question/14859108

#SPJ11

1. Administrator accounts: These accounts have complete control over the system and can perform any action, including installing software and changing system settings.

2. Standard user accounts: These accounts have limited privileges and can only perform basic tasks like running applications and accessing files.

3. Guest accounts: These accounts are temporary and are intended for users who need to access the system for a short period of time. They have very limited access and cannot make any permanent changes to the system.

4. Service accounts: These accounts are used to run background services and processes that do not require user interaction.

5. System accounts: These accounts are used by the operating system itself to perform various tasks and are not intended for user interaction.

The data string for a standard transaction can be compared to a sequence of information or instructions that are processed in a specific order to complete a transaction.

Just like a data string, a standard transaction consists of various elements or fields that convey specific information related to the transaction. These fields could include details such as transaction ID, date and time, customer information, product or service information, payment details, and any other relevant data required to complete the transaction.

The comparison highlights the structured nature of both the data string and the standard transaction, where each element plays a crucial role in ensuring the accuracy and completeness of the transaction process.

To learn more about Transaction - brainly.com/question/29891675

#SPJ11

The northwestern coniferous forest is primarily found in the Pacific Northwest region of North America, spanning from Northern California up through Oregon, Washington, and into British Columbia in Canada.

The northwestern coniferous forest, also known as the Pacific temperate rainforest, is one of the most ecologically diverse and productive forests in the world. It covers a large area of the Pacific Northwest region, extending from the Cascade Range in the east to the Pacific Ocean in the west. The forest is characterized by its tall coniferous trees, such as Douglas fir, Sitka spruce, and Western red cedar, as well as a diverse understory of ferns, mosses, and shrubs. This ecosystem is also home to a variety of wildlife, including black bears, cougars, elk, and numerous bird species. The climate in this region is characterized by mild, wet winters and dry summers, with abundant rainfall throughout the year. The northwestern coniferous forest is an important source of timber, as well as an important ecosystem for biodiversity and recreation.

To learn more about coniferous forest  : brainly.com/question/14403438

#SPJ11

A transformer is a device that transfers electrical energy between two coils.

Transformers consist of two coils, called the primary and secondary coils, wound around a common iron core. When an alternating current (AC) passes through the primary coil, it generates a changing magnetic field in the iron core.

This changing magnetic field induces a voltage in the secondary coil, allowing the transfer of electrical energy from the primary coil to the secondary coil. The ratio of the number of turns in the primary and secondary coils determines the voltage transformation of the transformer.

Learn more about Transformers

brainly.com/question/15200241

#SPJ11

Semiconductors - 10-6 to 104 (2-m)1, Metals - 107 (a-m)1, Insulator - 1020 to 10-10 (2-m)1.

Conductivity is the measure of a material's ability to conduct electricity.

Different classes of materials have different conductivity ranges. Semiconductors have a range of 10-6 to 104 (2-m)1, metals have a range of 107 (a-m)1, and insulators have a range of 1020 to 10-10 (2-m)1.

Semiconductors, such as silicon, have intermediate conductivity and can be used in electronic devices like transistors. Metals, such as copper, have high conductivity and are used in electrical wiring.

Insulators, such as rubber, have low conductivity and are used to insulate electrical wires and prevent electric shock. Understanding the conductivity of materials is important for designing and manufacturing electronic devices and electrical systems.

For more such questions on Semiconductors, click on:

https://brainly.com/question/27753295?source=archive

#SPJ11

Conductivity values/ranges can be associated with different classes of materials as follows:

1020 to 10-10 (2-m)1: Insulators

Insulators have very low conductivity and high resistivity. They are poor conductors of electricity.

107 (a-m)1: Metals

Metals have high conductivity and low resistivity. They are excellent conductors of electricity.

10-6 to 104 (2-m)1: Semiconductors

Semiconductors have intermediate conductivity between insulators and metals. They can be controlled to exhibit both conducting and non-conducting behavior, making them useful for electronic devices.

Therefore, the correct match is:

1020 to 10-10 (2-m)1: Insulators

107 (a-m)1: Metals

10-6 to 104 (2-m)1: Semiconductors

Learn more about Conductivity here

https://brainly.com/question/24943129

#SPJ11

Answer:

brake drums or rotors

Explanation:

When the brake pedal is pressed, hydraulic pressure is applied to the brake system which in turn forces the brake shoes to press against the drum or rotor, slowing down or stopping the car.

Brake shoes are a type of braking system used in some older vehicles and heavy-duty applications. They are typically made of metal and lined with friction material, such as asbestos or ceramic, which provides the necessary stopping force. Brake shoes stop a car by exerting pressure on the brake drum or rotor, which is located behind the wheel and rotates with the wheel. When the driver applies the brake pedal, the brake shoes are pushed against the drum or rotor, creating friction and slowing down the wheel. This slows down the car as a whole, allowing it to come to a stop. Proper maintenance and regular replacement of brake shoes are crucial for safe and reliable braking performance.

Learn more about Brakes at:

https://brainly.com/question/14318250

#SPJ11

The return value of the function call "15eek(infd, 0, SEEK_END);" would be -1. The given function call "15eek(infd, 0, SEEK_END);" seems to have a typo, as it appears to be misspelled as "15eek" instead of "lseek."

Assuming it is meant to be "lseek," the function is used to change the current position of the file offset associated with the file descriptor "infd." The third argument, "SEEK_END," specifies that the offset should be set to the end of the file. If the function call is successful, it returns the new offset value. However, if there is an error, it returns -1. Therefore, in this case, the return value of -1 suggests that there was an error in performing the "lseek" operation. It could be due to various reasons, such as an invalid file descriptor or a file that doesn't support seeking.

It's important to note that the correct spelling of the function should be "lseek" instead of "15eek" to make it a valid function call.

To learn more about return value refer:

brainly.com/question/12939282

#SPJ11

If you add three more people to a project team of 5, you will add 6 more communication channels. This is because the formula for calculating communication channels is n(n-1)/2, where n is the number of team members.

With 5 team members, there are already 10 communication channels. Adding three more team members brings the total number of team members to 8, which would result in 28 communication channels using the formula (8(8-1)/2). Subtracting the original 10 channels from the new total of 28, you get 18, which is the number of additional communication channels added by the three new team members.

To learn more about communication

https://brainly.com/question/30217942

#SPJ11

Answer:

light load and where noise is a factor.

Explanation:

name me brainliest please, and say thank you.

A sleeve bearing would typically be used in a motor that operates with a low speed and low load.

A sleeve bearing, also known as a plain bearing, is a type of bearing commonly used in various mechanical applications, including motors. Sleeve bearings consist of a cylindrical sleeve made of a low-friction material, such as bronze or plastic, which surrounds the rotating shaft of the motor. The choice of bearing type depends on the specific operating conditions of the motor. Sleeve bearings are typically utilized in motors that operate at low speeds and low loads.

This is because sleeve bearings are designed to provide sufficient support and reduce friction in applications with lighter loads and lower rotational speeds. In contrast, high-speed and high-load motors often require more robust bearing systems, such as ball bearings or roller bearings, which can handle the increased forces and offer better performance under heavy-duty conditions. Therefore, when considering the type of bearing for a motor, factors such as speed, load, and expected operating conditions are taken into account to determine the most suitable bearing option.

To learn more about motor  click here

brainly.com/question/29314790

#SPJ11

To determine the complex power, we need to use the formula:

S = P + jQ

Where S is the complex power, P is the real power, Q is the reactive power, and j represents the imaginary unit.

Given that the apparent power S is 600 VA and the reactive power Q is 475 VAR (inductive), we can substitute these values into the formula to find the complex power.

S = P + jQ

600 VA = P + j(475 VAR)

Since the apparent power S is given in VA (volt-amperes) and the reactive power Q is given in VAR (volt-amperes reactive), the complex power will also be expressed in VA.

Therefore, the complex power is 600 + j475 VA.

Learn more about imaginary here

https://brainly.com/question/28286650

#SPJ11

Answer:

because of the response to the distress calls.

Explanation:

In 1912, wireless communication was used to save approximately 700 people during the sinking of the RMS Titanic.

During the tragic sinking of the RMS Titanic on April 15, 1912, wireless communication played a crucial role in saving lives. The wireless operators on the Titanic, Jack Phillips and Harold Bride, transmitted distress signals using the ship's Marconi wireless apparatus. These distress signals were received by other ships in the vicinity, most notably the RMS Carpathia.

Upon receiving the distress call, the Carpathia immediately changed its course and rushed to the Titanic's location to rescue the survivors. The wireless communication between the Titanic and the Carpathia facilitated the coordination of the rescue efforts, ensuring that help arrived as quickly as possible. The successful use of wireless communication in this disaster highlighted the importance of radio communication for maritime safety and led to advancements in regulations and practices for ship communication systems.

To learn more about wireless communication click here

brainly.com/question/30490055

#SPJ11

In order for a stopped train to be in static equilibrium, the following general equilibrium conditions must be satisfied:

Force Equilibrium: The sum of all forces acting on the train must be zero. This includes both external forces, such as the weight of the train and any applied forces, as well as internal forces, such as the normal forces between the train and the tracks.

Moment Equilibrium: The sum of all moments (or torques) acting on the train must be zero. This ensures that the train is not rotating or experiencing any rotational motion. Moments can be caused by forces acting at a distance from a pivot point.Translational Equilibrium: The net force acting on the train in any direction must be zero. This means that there is no acceleration or change in velocity in any direction.

Rotational Equilibrium: The net torque acting on the train must be zero. This ensures that there is no rotation or angular acceleration.By satisfying these equilibrium conditions, the stopped train will remain stationary and not experience any motion or rotation.

Learn more about equilibrium here

https://brainly.com/question/517289

#SPJ11

False. Powder metal processing is not typically cost-effective for low production volume parts. Powder metal processing involves the production of parts by compacting and sintering metal powders.

While it offers several advantages, such as the ability to create complex shapes and achieve high material utilization, it may not be the most cost-effective option for low production volume parts.

Powder metal processing typically requires specialized equipment and tooling, which can be expensive to set up. The costs associated with powder production, powder handling, and compaction processes can also add up. Additionally, the sintering process, which involves heating the compacted powder to fuse the particles, requires energy and time, which further contribute to the overall cost.

For low production volume parts, the initial investment and ongoing costs associated with powder metal processing may outweigh the benefits. Other manufacturing methods, such as conventional machining or even additive manufacturing, may offer more cost-effective solutions for small production quantities. These alternative methods can be more flexible, quicker, and require less specialized equipment, making them more suitable for low volume production scenarios.

To learn more about Powder metal refer:

https://brainly.com/question/31412099

#SPJ11

Without the accompanying visual reference or description, it is not possible to determine which part of the container door assembly is highlighted.

The container door assembly consists of various components, including  locks, handles, seals, and latches. Each part serves a specific function in securing and opening/closing the container doors. Without further information about the specific context or details, it is challenging to pinpoint the highlighted part accurately. To determine the highlighted part, it would be necessary to provide a description or reference to the specific visual representation or context that indicates the highlighted area. Once the visual reference is available, it would be possible to identify and describe the highlighted part of the container door assembly.

To learn more about doors click here

brainly.com/question/31801868

#SPJ11

The metals typically have the largest values of the coefficient of thermal expansion. The Option A/.

The coefficient of thermal expansion refers to the measure of how much a material expands or contracts in response to changes in temperature. Among the given options, metals generally have the largest values of the coefficient of thermal expansion.

This is because metals have a crystalline structure with closely packed atoms that can easily move and vibrate when exposed to heat leading to significant expansion. Ceramics and polymers tend to have lower coefficients of thermal expansion compared to metals.

Read more about thermal expansion

brainly.com/question/15320204

#SPJ4

The new order of rows is stored in the permutation matrix that is third in the output list from the LU (Lower-Upper) function in MATLAB.

The LU function decomposes a given matrix into its lower triangular and upper triangular factors, and the permutation matrix represents the row exchanges performed during the LU decomposition process.

The permutation matrix is a square matrix that consists of 0s and 1s. Each row and column of the permutation matrix contains exactly one 1, and the positions of the 1s indicate the new order of the rows after partial pivoting. By applying the permutation matrix to the original matrix, the LU decomposition with partial pivoting ensures numerical stability and accuracy in solving linear systems of equations.

In MATLAB, when using the LU function, the permutation matrix can be obtained as the third output argument. It provides valuable information about the row reordering performed during the LU decomposition process.

To learn more about permutation matrix
https://brainly.com/question/30707948
#SPJ11

To calculate the mass flux density of the pollutant through the tube due to advection, we can use the formula:

Mass flux density = Concentration × Flow rate

Given: Flow rate of water = 100 cm^3/s

Pollutant concentration in water = 2 mg/L

(a) Mass flux density of the pollutant through the tube due to advection:

Mass flux density = 2 mg/L × 100 cm^3/s

To simplify the units, we need to convert cm^3 to liters:

1 cm^3 = 0.001 L

Mass flux density = 2 mg/L × 100 × 0.001 L/s

Mass flux density = 0.2 mg/s

(b) The total mass flux through the tube due to advection can be calculated by multiplying the mass flux density by the cross-sectional area of the tube.

Assuming the tube has a constant cross-sectional area, we would need the dimensions of the tube to calculate it. Without that information, we cannot determine the exact value of the total mass flux.

Learn more about pollutant here

https://brainly.com/question/19621497

#SPJ11

As shown in the accompanying figure, the CompareValidator validation control can be used to ensure two passwords match.

The CompareValidator control in ASP.NET allows you to compare the value of an input control (such as a password textbox) with another value or control. In this case, it can be used to compare two password fields to ensure that they match. By setting the ControlToCompare property of the CompareValidator to the ID of the second password input control and the Operator property to "Equal", the CompareValidator will validate that the values of the two password fields are the same. If the passwords do not match, the validation will fail and an appropriate error message can be displayed to the user. Using the CompareValidator control provides a convenient and reliable way to enforce password matching in web forms, helping to ensure data consistency and accuracy.

To learn more about validation

https://brainly.com/question/30654475

#SPJ11

To test a mass air flow (MAF) sensor, you can perform a visual inspection, use a multimeter, or use a scan tool to check for any error codes.

A visual inspection involves checking the sensor for any damage, debris, or loose connections. A multimeter can be used to test the MAF sensor's electrical continuity and measure the voltage output. A scan tool can read the sensor data and compare it to the expected values. If the readings are outside of the expected range, it may indicate a faulty sensor.

It is also recommended to clean the MAF sensor with a specialized cleaner to remove any dirt or debris that may be affecting its performance. However, it's important to avoid using compressed air or any other harsh chemicals as this can damage the sensor. Regular maintenance of the MAF sensor can help ensure it is functioning properly and prevent issues with engine performance.

To learn more about MAF sensor : brainly.com/question/15188617

#SPJ11

The power required to drive the screw when raising the 30-ton gate at a rate of 5 feet per minute is approximately [insert answer] watts.

To calculate the power required, we can use the formula:

Power = (Force × Distance) / Time

First, let's determine the force exerted by the gate on the screw. Since we know the weight of the gate, which is 30 tons or 60,000 lbs, we can calculate the force by multiplying the weight by the acceleration due to gravity (32.2 ft/s²):

Force = Weight × Gravity

      = 60,000 lbs × 32.2 ft/s²

      = 1,932,000 lb·ft/s²

Next, we need to calculate the distance the gate travels per minute. Given that the gate moves at a rate of 5 feet per minute, we can use this value directly:

Distance = 5 ft/minute

Now, we can substitute the values into the power formula:

Power = (Force × Distance) / Time

      = (1,932,000 lb·ft/s² × 5 ft/minute) / 60 seconds/minute

      ≈ [161000] watts

Please note that since the unit of power is typically expressed in watts, it may be necessary to convert the units accordingly.

To learn more about power refer:

https://brainly.com/question/31325309

#SPJ11

A major scientific concern over nuclear energy is how to:
D. store the waste products safely.

Nuclear energy generates waste materials that are radioactive and can pose significant hazards to the environment and human health if not managed properly. Therefore, developing safe storage solutions for these waste products is a crucial aspect of nuclear energy production. Nuclear energy is a form of power generation that harnesses the energy released from nuclear reactions. It is primarily produced through a process called nuclear fission, where the nucleus of an atom is split, releasing a large amount of energy in the form of heat.

To know more about nuclear energy, visit the link : https://brainly.com/question/15214614

#SPJ11

The completed embankment will occupy a net volume of 257,000 cubic yards (cy). The borrow material will be used to construct it.

The forthcoming embankment, upon its completion, will take up a total volume of 257,000 cubic yards (cy).

To build the embankment, the necessary material will be obtained from borrow sources. These borrow sources provide the material required for construction, such as soil or rock, to create the embankment structure.

The net volume of 257,000 cy refers to the overall amount of material that will be utilized to shape and establish the embankment.

Read more about embankment here:

https://brainly.com/question/15913584

#SPJ4