The molality of dichloromethane in this solution is 6.12 m
The molality of dichloromethane in a solution of dichloromethane and 2-hexanone is calculated using the formula:
molality (m) = moles of solute (mol) / kilograms of solvent (kg)
In this case, the solute is dichloromethane (CH₂Cl₂) and the solvent is 2-hexanone (CH₃COC₄H₉). The mole fraction of dichloromethane is 0.380, so there are 0.380 moles of dichloromethane in one mole of the solution.
To get the mass of solvent, we need to convert the number of its moles to mass by multiplying it with its molar mass. The molar mass of 2-hexanone (CH₃COC₄H₉), is the sum of the atomic weights of each element, which is 100.161 g/mol. One mole of the solution contains 0.380 moles of dichloromethane and 0.620 moles 2-hexanone. Therefore, the mass of 2-hexanone is:
mass = moles x molar mass = 0.620 moles x 100.161 g/mol = 62.09982 g
Solving for the molality, we get:
m = 0.380 moles / (62.09982 g)(1 kg/1000g)
m = 6.25 mol/kg = 6.12 m
Learn more about molality here: brainly.com/question/24065939.
#SPJ11
PLEASE HELP THIS IS URGENT
Answer:
in the first box the answer will be=37.2
and in the second box= 22.4
there are three mechanistic steps of an aldol addition reaction: (1) deprotonation, (2) nucleophilic attack, (3) protonation.
The aldol reaction involves the reaction of an aldehyde or ketone with an enolate ion to form a β-hydroxyaldehyde or β-hydroxyketone, followed by a dehydration to form a double bond.
The aldol reaction is an important organic reaction in the formation of new carbon–carbon bonds. The reaction is named after the aldol reaction product, which contains both aldehyde and alcohol groups.
The aldol addition reaction has three mechanistic steps, which are deprotonation, nucleophilic attack, and protonation. These steps are explained below:
(1) Deprotonation: In the first step of the aldol reaction, the base removes a proton from the α-carbon of the carbonyl compound, which leads to the formation of the enolate ion.
The enolate ion is a resonance-stabilized anion that contains a negative charge on the oxygen atom and a double bond between the carbon and oxygen atoms.
(2) Nucleophilic attack: In the second step of the aldol reaction, the enolate ion acts as a nucleophile and attacks the carbonyl group of another molecule of the aldehyde or ketone.
This leads to the formation of a β-hydroxyaldehyde or β-hydroxyketone intermediate.
(3) Protonation: In the final step of the aldol reaction, the β-hydroxyaldehyde or β-hydroxyketone intermediate is protonated by the acid.
This leads to the formation of the aldol addition product, which contains a new carbon–carbon bond.
Thus, the aldol addition reaction involves three mechanistic steps, which are deprotonation, nucleophilic attack, and protonation.
These steps are essential for the formation of the aldol addition product, which contains a new carbon–carbon bond.
The aldol reaction is an important organic reaction that is widely used in the synthesis of natural products and pharmaceuticals.
to know more about aldehyde refer here:
https://brainly.com/question/30722723#
#SPJ11
the typical concentration of acetic acid in commercial vinegar is 5.0% w/v. calculate the molarity of this solution
The molarity of the commercial vinegar is 0.833 M.
To calculate the molarity of the commercial vinegar, we need to know the formula of acetic acid, which is CH3COOH. Then, we need to convert the percentage w/v to grams per liter (g/L) by assuming 100 mL of solution.
Finally, we can use the formula of molarity to calculate the concentration of acetic acid in moles per liter (mol/L). Here are the steps:
Step 1: Determine the formula of acetic acid (CH3COOH).
Step 2: Convert the percentage w/v to g/L by assuming 100 mL of solution.5.0% w/v = 5.0 g/100 mL = 50 g/L
Step 3: Calculate the molar mass of acetic acid. C = 12.01 g/mol, H = 1.01 g/mol, O = 16.00 g/mol.Molar mass = (2 x C) + (4 x H) + (2 x O) = 60.05 g/mol
Step 4: Calculate the number of moles of acetic acid in 1 L of solution.Number of moles = mass / molar massNumber of moles = 50 g / 60.05 g/mol = 0.8327 mol
Step 5:Calculate the molarity of the solution.Molarity = number of moles / volume Molarity = 0.8327 mol / 1 L = 0.833 M
Therefore, the molarity of the commercial vinegar is 0.833 M.
To know more about acetic acid click on below link:
https://brainly.com/question/15202177#
#SPJ11
Which of the following compounds is the least reactive toward nucleophilic aromatic substitution? A) 1-chloro-4-nitrobenzene B) 1-iodo-2-nitrobenzene C) 1-fluoro-4-nitrobenzene D) 1-bromo-3-nitrobenzene
Benzenesulphonic acids is least sensitive in an electrophilic replacement of an aromatic because of the M effect. 1-Chloro-4-nitrobenzene is the nucleophilic aromatic substitution that is least reactive to it (option A).
By nucleophilic, what do you mean?A substance is referred to as a nucleophile if it has a propensity to give electron pairs to electron acceptors in order to establish chemical bonds with them. Any ion, molecule, or pi bond with two free electrons or an electron pair has the capacity to act in a nucleophilic manner.
A nucleophile, is water?Water attracts electron-deficient compounds like protons, making it a nucleophile. Due to the easy accessibility of a singular electron pair on oxygens, water has a stronger nucleophilic than electrophilic nature.
To know more about Nucleophilic visit:
https://brainly.com/question/30713995
#SPJ1
What is the pH of the solution obtained by mixing 35.00 mL of 0.250 M HCl and 35.00 mL of 0.125 M NaOH?
The pH of the solution obtained by mixing 35.00 mL of 0.250 M HCl and 35.00 mL of 0.125 M NaOH can be calculated as follows:
Let's understand this step-by-step:
1. HCl is an acid, while NaOH is a base. When an acid and a base react, they undergo a neutralization reaction, forming salt and water. The balanced chemical equation for the reaction between HCl and NaOH is:
HCl + NaOH → NaCl + H2O
This equation shows that 1 mole of HCl reacts with 1 mole of NaOH to produce 1 mole of NaCl and 1 mole of water.
Using the volumes and concentrations given in the question, we can calculate the moles of HCl and NaOH as follows: moles of HCl = 35.00 mL × 0.250 mol/L = 0.00875 mol
moles of NaOH = 35.00 mL × 0.125 mol/L = 0.004375 mol
The reaction between HCl and NaOH is 1:1, so the limiting reactant is NaOH because it has fewer moles. Therefore, all the NaOH will be used up, leaving some HCl unreacted. The number of moles of HCl that remain after the reaction is equal to the initial number of moles of HCl minus the number of moles of NaOH used up:
mol of HCl remaining = 0.00875 mol - 0.004375 mol = 0.004375 mol
The total volume of the solution is the sum of the volumes of the acid and the base:
Vtotal = Vacid + Vbase
Vtotal = 35.00 mL + 35.00 mL = 70.00 mL = 0.07000 L
The concentration of HCl in the solution is calculated using the number of moles of HCl remaining and the total volume of the solution:
[HCl] = mol of HCl remaining / Vtotal
[HCl] = 0.004375 mol / 0.07000 L
[HCl] = 0.0625 M
The pH of the solution can be calculated using the equation:
pH = -log[H+]
The concentration of H+ in the solution is equal to the concentration of HCl, so:
[H+] = [HCl] = 0.0625 M
Substituting this value into the pH equation:
pH = -log[H+]pH = -log(0.0625)pH = 1.20Therefore, the pH of the solution obtained by mixing 35.00 mL of 0.250 M HCl and 35.00 mL of 0.125 M NaOH is 1.20.
Learn more about pH: What is the approximate ph of a solution if the concentration of hydrogen ions is 5. 0 × 10–4 moles per liter? https://brainly.com/question/26424076
#SPJ11
if the percent of solute in an aqueous solution is 5%, what is the percentage of water in that solution?
Answer: The percentage of water in the solution would be 95%.
Explanation:
The percent composition of a solution refers to the amount of each component in the solution as a percentage of the total solution. In this case, if the percent of solute in the solution is 5%, then the remaining percentage must be the percent of water in the solution.
Since the total percent composition of the solution must add up to 100%, we can find the percent of water in the solution by subtracting the percent of solute from 100%.
% Water = 100% - % Solute
% Water = 100% - 5%
% Water = 95%
Therefore, the percentage of water in the solution is 95%.
Use the given standard enthalpies of formation to determine the heat of reaction of the following reaction:
Note Heat of formation of elements is 0.
AH° N₂H₂ (1) = +50.6 kJ/mole
AH, H₂0 (1) = -285.9 kJ/mole
AH° CO₂ (g) = -393.5 kJ/mole
C3H6O (1) = -249.5 kJ/mole
CS₂ (g) = +177.4 kJ/mole
AH SO₂ (g) = -296.8 kJ/mole
AH° C6H12 (1) = -156.4 kJ/mole
AH
AH
1. N₂H4(1) + O₂(g) →N₂(g) + 2 H₂O(1)
1. The heat of reaction for the given chemical equation is -522.1 kJ/mole.
2. The heat of reaction for the given chemical equation is -3327.1 kJ/mole.
3. The heat of reaction for the given chemical equation is -1161.5 kJ/mole.
How did we get these values?1. N₂H₄(1) + O₂(g) →N₂(g) + 2 H₂O(1)
The balanced chemical equation for the reaction is:
N₂H₄(1) + O₂(g) → N₂(g) + 2 H₂O(1)
To find the heat of reaction (ΔH°rxn) for this reaction, we need to calculate the difference between the standard enthalpies of formation of the products and reactants, multiplied by their respective stoichiometric coefficients:
ΔH°rxn = ΣnΔH°f(products) - ΣmΔH°f(reactants)
where n and m are the stoichiometric coefficients of the products and reactants, respectively, and ΔH°f is the standard enthalpy of formation.
Using the given standard enthalpies of formation, we get:
ΔH°rxn = [0 - 2(-285.9 kJ/mole) + 50.6 kJ/mole] - [1(0) + 1(-50.6 kJ/mole)]
ΔH°rxn = -572.7 kJ/mole + 50.6 kJ/mole
ΔH°rxn = -522.1 kJ/mole
Therefore, the heat of reaction for the given chemical equation is -522.1 kJ/mole.
2. C3H6O(1) + 4 O₂(g) → 3 CO₂(g) + 3 H₂O(1)
The balanced chemical equation for the reaction is:
C3H6O(1) + 4 O₂(g) → 3 CO₂(g) + 3 H₂O(1)
To find the heat of reaction (ΔH°rxn) for this reaction, we need to calculate the difference between the standard enthalpies of formation of the products and reactants, multiplied by their respective stoichiometric coefficients:
ΔH°rxn = ΣnΔH°f(products) - ΣmΔH°f(reactants)
where n and m are the stoichiometric coefficients of the products and reactants, respectively, and ΔH°f is the standard enthalpy of formation.
Using the given standard enthalpies of formation, we get:
ΔH°rxn = [3(-393.5 kJ/mole) + 3(-285.9 kJ/mole)] - [1(-249.5 kJ/mole) + 4(0)]
ΔH°rxn = -3576.6 kJ/mole + 249.5 kJ/mole
ΔH°rxn = -3327.1 kJ/mole
Therefore, the heat of reaction for the given chemical equation is -3327.1 kJ/mole.
3. CS₂(1) + 3 O₂(g) → CO₂(g) + 2 SO₂(g)
The balanced chemical equation for the reaction is:
CS₂(1) + 3 O₂(g) → CO₂(g) + 2 SO₂(g)
To find the heat of reaction (ΔH°rxn) for this reaction, we need to calculate the difference between the standard enthalpies of formation of the products and reactants, multiplied by their respective stoichiometric coefficients:
ΔH°rxn = ΣnΔH°f(products) - ΣmΔH°f(reactants)
where n and m are the stoichiometric coefficients of the products and reactants, respectively.
Using the given standard enthalpies of formation, we get:
ΔH°rxn = [1(-393.5 kJ/mole) + 2(-296.8 kJ/mole)] - [1(177.4 kJ/mole) + 1(0)]
ΔH°rxn = -984.1 kJ/mole - 177.4 kJ/mole
ΔH°rxn = -1161.5 kJ/mole
Therefore, the heat of reaction for the given chemical equation is -1161.5 kJ/mole.
learn more about heat of reaction: https://brainly.com/question/11631046
#SPJ1
Consider the following stoichiometric combustion of ethane. For a case with 200% theoretical air, how many kmol of air would be required per kmol of fuel?
C2H6 + 3.5(O2 + 3.76N2) --> 2CO2 + 3H2O + 13.16N2
select one blew
a. 3.5 kmol air
b. 7 kmol air
c. 16.7 kmol air
d. 33.3 kmol air
For a case with 200% theoretical air, 33.3 kmol of air would be required per kmol of fuel. It is given that the stoichiometric combustion of ethane isC2H6 + 3.5(O2 + 3.76N2) → 2CO2 + 3H2O + 13.16N2As per the equation, it takes 3.5 kmol of (O2 + 3.76N2) to burn 1 kmol of ethane, and for 200% theoretical air, 7 kmol of (O2 + 3.76N2) would be used. Hence, option (d) is correct.
Therefore, 2 kmol of ethane would require 7 kmol of (O2 + 3.76N2). We can calculate the number of kmol of air needed per kmol of fuel as follows:Number of kmol of air per kmol of fuel = (Number of kmol of (O2 + 3.76N2) per kmol
of fuel) / 0.21Number of kmol of air per kmol of fuel = (7/2) / 0.21Number of kmol of air per kmol of fuel = 16.67 / 0.21 = 79.29 ≈ 33.3 kmol of airHence, option (d) is correct.
For more similar questions on topic stoichiometric combustion
brainly.com/question/14077954
#SPJ11
what conditions do the extremophile sulfolobus acidicaldonious survive under? select the two answers that are correct.
The extremophile sulfolobus acidicaldonius survives under high acidity and high temperature.
Thus, the correct answers are high temperature and high acidity (A and E).
A thermoacidophile species, such as Sulfolobus acidocaldarius, belong to the archaea phylum and is resistant to both high temperatures and highly acidic conditions. The adaptions of this species include that the optimal pH of its enzyme will lie below pH 7, since those are acidic conditions. Also, thermoacidophile species can inhabit hydrothermal springs, since they can live in high-temperature conditions.
Your question is incomplete, but most probably your options were
A. high temperature
B. low pressure
C. low oxygen
D. high alkalinity
E. high acidity
Thus, the correct options are A and E.
For more information about sulfolobus acidicaldonius refers to the link: https://brainly.com/question/15874458
#SPJ11
The Quantum Theory Model seems to contradict one the above scientist's hypothesis. Who is it and why? Is there more than one?
Answer:
Multiple scientists, including Albert Einstein, David Bohm, John Bell, and Roger Penrose, have challenged certain aspects of quantum theory due to differing views about particle behavior, hidden variables, and consciousness. Despite the challenges, quantum theory remains widely accepted as one of the most accurate and well-tested frameworks in modern physics.
how many moles of naoh will react with 0.50 mol of h2co3?
a. 0,25 mol NaOH
b. 0.50 mol NaOH
c. 1.0 mol NaOh
d. 2.0 mol NaOH
We will need 1.0 mol NaOH to react with 0.5 mol pf H2CO3.
Let's understand this in detail:
The balanced chemical equation of the neutralization reaction between H2CO3 and NaOH is
H2CO3 + 2NaOH ⟶ Na2CO3 + 2H2O.
We need to use the mole ratio from the balanced equation to determine how many moles of NaOH will react with 0.50 mol of H2CO3. We can see from the equation that 1 mole of H2CO3 reacts with 2 moles of NaOH.
Therefore, 0.50 mol of H2CO3 will react with
(2/1) x 0.50 = 1.0 mol of NaOH.
Answer: c. 1.0 mol NaOH.
#SPJ11
Learn more about neutralization reaction: Define Neutralisation reaction along with examples. https://brainly.com/question/23008798
does the hydrogen necessary in the electron transport chain come from the splitting of carbon dioxide molecules
The hydrogen necessary for this process is ultimately derived from the splitting of carbon dioxide molecules. Yes, the hydrogen necessary for the electron transport chain is derived from the splitting of carbon dioxide molecules in a process known as the Calvin Cycle, or the light-dependent reaction.
In this process, carbon dioxide, water, and light energy are used to create high-energy molecules, such as ATP and NADPH, which are then used in the electron transport chain. During the Calvin cycle, carbon dioxide is reduced by NADPH and ATP to produce a three-carbon molecule called glycerate 3-phosphate.
Hydrogen is removed from glycerate 3-phosphate to create a two-carbon compound known as glyceraldehyde 3-phosphate. This compound is then used to create other compounds, such as glucose, which can be used for energy.
Know more about electron transport chain here:
https://brainly.com/question/24372542
#SPJ11
in the solidifcation process the production of metallic slabs or ingots is known as the process of turning the metallic slabs or ingots into useful shapes is known as
The process of turning metallic slabs or ingots into useful shapes is known as "hot working" or "hot forming".
Hot working is a metalworking process where metals are shaped when they are above their recrystallization temperature. This process is usually done after a metal has been solidified from its molten state. It involves the application of force to change the shape of the metal, usually by compressing, drawing, forging, or extruding.
The temperature used during hot working can vary depending on the type of metal, but typically it must be at least half of the metal's melting point temperature. By hot working, the metal can be formed into various shapes, including thin sheets, rods, and tubes.
In the hot working process, the metal is heated until it reaches the recrystallization temperature and then deformed by mechanical means, such as hammering or rolling. The metal is then cooled down, either slowly or rapidly, depending on the required properties of the metal. Rapid cooling will increase the strength of the metal but also make it brittle, while slower cooling will give the metal more ductility. During cooling, some of the metal grains are recrystallized, leading to a homogeneous microstructure.
Hot working is an important process for many metal fabrication industries, including automotive, aerospace, and construction. It is used to create metal parts and components with superior strength and ductility, as well as for creating metal artworks or sculptures. The process is also widely used in metal recycling, where it is used to reshape and reform metals from their original form. Hot working can be a complex process and is typically done by highly skilled metalworkers.
To know more about hot working, refer here:
https://brainly.com/question/18994380#
#SPJ4
old ammunition or fireworks, lithium-sulfur batteries, wastes containing cyanides or sulfides, and chlorine bleach and ammonia are examples of which type of hazardous waste?
These are all examples of chemical hazardous waste. Chemical hazardous waste is waste that is flammable, reactive, corrosive, or toxic. It can include things like unused pesticides, paint, cleaning products, or batteries.
Old ammunition or fireworks, lithium-sulfur batteries, wastes containing cyanides or sulfides, and chlorine bleach and ammonia are examples of Household hazardous waste.What is hazardous waste?Hazardous waste is a waste material that is harmful to human health or the environment. Every year, households and businesses generate hazardous waste in various forms. Because hazardous waste may be flammable, poisonous, reactive, or corrosive, it requires special disposal procedures. Hazardous wastes must be properly disposed of to safeguard human health and the environment.Household hazardous waste (HHW) is the type of waste that can be found in a typical home. This waste is produced by households when they use products that contain harmful chemicals. Old ammunition or fireworks, lithium-sulfur batteries, wastes containing cyanides or sulfides, and chlorine bleach and ammonia are examples of household hazardous waste.
For more such questions on hazardous waste
https://brainly.com/question/4055432
#SPJ11
which of the following is not a strong acid? select the correct answer below: hydrobromic acid hydroiodic acid hydrochloric acid hydrofluoric acid
Hydrofluoric acid is not a strong acid.
Hydrofluoric acid (HF) is a weak acid because it does not completely dissociate in water to form [tex]H^+[/tex] ions. In water, HF undergoes a partial dissociation to form [tex]H^+[/tex] and [tex]F^-[/tex] ions according to the following equilibrium:
[tex]HF + H_2O[/tex] ⇌ [tex]H_3O^+ + F^-[/tex]
This equilibrium favors the reactant side, meaning that most of the HF molecules remain as HF in solution, with only a small percentage dissociating to form [tex]H^+[/tex] ions.
In contrast, hydrochloric acid (HCl), hydrobromic acid (HBr), and hydroiodic acid (HI) are strong acids because they completely dissociate in water to form [tex]H^+[/tex] ions. These strong acids have weak conjugate bases, which makes the acid dissociation reaction highly favorable.
The strength of an acid is related to its tendency to donate a proton ( [tex]H^+[/tex] ) in water. The stronger the acid, the more readily it donates [tex]H^+[/tex] ions.
Therefore, hydrochloric acid, hydrobromic acid, and hydroiodic acid are stronger acids than hydrofluoric acid.
To learn more about acids refer: https://brainly.com/question/14174495
#SPJ11
A student exposed r-1-bromo-2-propanol to sodium hydroxide, isolated an optically active product, and collected the proton nmr below. what is the structure of the compound that the student isolated?
The student obtained an optically active product after exposing r-1-bromo-2-propanol to sodium hydroxide. The proton NMR of the product is also provided.
The structure of the compound that the student isolated is:CH3 – CH (OH) – CH2 – Br
In the given compound r-1-bromo-2-propanol, the bromine atom is attached to the first carbon atom. When this compound is treated with sodium hydroxide, the hydroxide ion attacks the carbon atom attached to the bromine atom and forms a negatively charged oxygen atom.This negatively charged oxygen atom further attracts the proton of the adjacent carbon atom (second carbon atom). After the transfer of a proton, the negatively charged oxygen atom gets neutralized and an alkoxide ion is formed. This alkoxide ion further attacks the third carbon atom and the compound is formed.In the compound obtained, there is no plane of symmetry or center of symmetry. This makes the compound optically active.
Further, the proton NMR shows the presence of a singlet at chemical shift 1.1 ppm due to the presence of three equivalent methyl groups. The presence of a broad singlet at chemical shift 3.7 ppm is due to the presence of –OH group. The singlet at chemical shift 4.2 ppm is due to the presence of –CH2 group.The structure of the compound that the student isolated is CH3 – CH (OH) – CH2 – Br.
Learn more about optically active products and proton NMR here, https://brainly.com/question/24215073
#SPJ11
Mercury concentrations were measured in freshwater shrimp populations in two different ponds, one polluted with mercury and one unpolluted, with a similar food web in each pond. Which of the following best identifies the scientific question that would guide this investigation?
a. How does the food web in a pond affect biomagnification of toxins?
b. How much mercury is found in the tissues of shrimp predators in an unpolluted pond?
c. How do different species of shrimp excrete mercury from their bodies?
d. How much mercury accumulates in the tissues of freshwater shrimp living in a polluted pond?
The scientific question that would guide this investigation is d. how much mercury accumulates in the tissues of freshwater shrimp living in a polluted pond?
This is the best choice among the options because it directly addresses the issue that the investigation aims to address: the levels of mercury concentrations in freshwater shrimp populations in two different ponds, one polluted with mercury and one unpolluted, with a similar food web in each pond.
The question is straightforward and focuses on the main objective of the study, which is to measure the concentration of mercury in the tissues of freshwater shrimp living in the polluted pond.
The other options, while they may be relevant to the study, are not the main focus of the investigation.
Option A, for instance, deals with how the food web in a pond affects biomagnification of toxins.
Option B is concerned with the amount of mercury found in the tissues of shrimp predators in an unpolluted pond, which is not the primary objective of the study.
Option C is focused on the different species of shrimp excreting mercury from their bodies. This may be useful to know, but it is not the main question being investigated.
So, the correct answer will be option d. How much mercury accumulates in the tissues of freshwater shrimp living in a polluted pond?
Learn more about biomagnification on:
https://brainly.com/question/7631542
#SPJ11
a student needs to prepare a buffer made from and with ph . if ka for is , what ratio of is required?
To prepare a buffer of a desired pH, the Henderson-Hasselbalch equation can be used:
pH = pKa + log([A-]/[HA])
where pH is the desired pH, pKa is the dissociation constant of the weak acid, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid.
In this case, the weak acid is , and its dissociation reaction is:
↔ +
The dissociation constant (Ka) for this reaction is given as .
To calculate the ratio to required to prepare a buffer at a desired pH, we first need to rearrange the Henderson-Hasselbalch equation as follows:
[A-]/[HA] = 10^(pH - pKa)
Substituting the values, we get:[A-]/[HA] = 10^( - ) =
Therefore, the required ratio of [A-] to [HA] is : . This means that to prepare a buffer at the desired pH, we need to mix of and of in the buffer solution.
What is a Substituting ?Substituting refers to the process of replacing one element, molecule, or group with another in a chemical reaction or a chemical compound. It is a common chemical technique used in various chemical reactions and organic synthesis. By substituting one atom or group for another, it is possible to change the properties and behavior of the molecule or compound, which can have important implications in various fields such as medicine, materials science, and industry.
To know more about Substituting visit :
https://brainly.com/question/10423146
#SPJ1
how many different alkenes result when 2-bromohexane is treated with a strong base? select answer from the options below 1 2 3 4
When 2-bromohexane is treated with a strong base the alkenes that would result is given as 1
What alkenes would resultWhen 2-bromohexane is treated with a strong base, such as sodium ethoxide (NaOEt) or sodium hydroxide (NaOH), it undergoes elimination reaction (also called dehydrohalogenation) to form different alkenes.
The product(s) of the reaction depend on the position of the β-carbon (the carbon next to the bromine atom) that undergoes deprotonation. Since there are two β-carbons in 2-bromohexane, two different alkenes can be formed.
Read more on alkenes here:https://brainly.com/question/29120960
#SPJ1
what will you use to prepare the calibration curve in this project? group of answer choices a solvent blank. a series of solutions with the exact same analyte concentration. a series of solutions with various unknown analyte concentrations. a series of solutions with a range of precisely known analyte concentrations.
A series of solutions with a range of precisely known analyte concentrations. Option D
What is a calibration curve?A calibration curve is a graphical representation of the relationship between the concentration or amount of a substance, and a signal or measurement obtained from an analytical instrument or assay. The calibration curve is constructed by measuring the signal or response of the instrument or assay at different known concentrations or amounts of the substance, and plotting these values on a graph.
The resulting curve is then used to determine the concentration or amount of the substance in an unknown sample by measuring its signal or response and comparing it to the calibration curve.
Learn more about calibration curve:https://brainly.com/question/29729322
#SPJ1
dilute solutions of acids are commonly prepared by diluting the concentrated commercial stock solutions found in chemistry laboratories. the concentration of stock sulfuric acid is 18.0 m. what volume of stock sulfuric acid should be diluted to 1.50 l with water in order to have a 0.750 m solution of sulfuric acid?
1.27 l of stock sulfuric acid should be diluted to 1.50 l with water in order to have a 0.750 m solution of sulfuric acid.
To make a 0.750 m solution of sulfuric acid, you need to dilute 18.0 m stock sulfuric acid with water to 1.50 l.
To make a 0.750 m solution of sulfuric acid, you need to start with 18.0 m stock sulfuric acid and dilute it with water to 1.50 l.
You can use the formula C1V1 = C2V2 to determine the volume of stock sulfuric acid needed. C1 represents the concentration of stock sulfuric acid (18.0 m), V1 represents the volume of stock sulfuric acid (unknown), C2 represents the concentration of the desired solution (0.750 m), and V2 represents the volume of the desired solution (1.50 l).
Plugging in the given values, you get (18.0 m)(V1) = (0.750 m)(1.50 l). Solving for V1, you get V1 = 1.27 l. Therefore, you need 1.27 l of stock sulfuric acid to make a 0.750 m solution of sulfuric acid with a total volume of 1.50 l.
To know more about sulfuric acid click on below link:
https://brainly.com/question/30039513#
#SPJ11
describe how the orientaon of the glycosidic bond affects the properes of the polysaccharides it creates.
The orientation of the glycosidic bond affects the properties of the polysaccharides it creates by determining the geometry of the sugar units in the polymer chain. When the glycosidic bond is in the alpha configuration, the sugar ring has a twisted conformation, which results in the sugar units being oriented in a more linear fashion.
In contrast, when the glycosidic bond is in the beta configuration, the sugar ring has a more planar conformation, which results in the sugar units being oriented in a more zig-zag fashion.
This difference in orientation affects the overall structure of the polysaccharide. Polysaccharides with alpha glycosidic bonds tend to form helical structures, while polysaccharides with beta glycosidic bonds tend to form sheet-like structures. This is because the twisted conformation of the alpha sugar units allows for the formation of hydrogen bonds between adjacent sugar units, which leads to the formation of a helix.
In contrast, the more planar conformation of the beta sugar units does not allow for the formation of hydrogen bonds between adjacent sugar units, which leads to the formation of a sheet.
Additionally, the orientation of the glycosidic bond affects the solubility and digestibility of the polysaccharide. Polysaccharides with alpha glycosidic bonds tend to be more soluble and more easily digested than polysaccharides with beta glycosidic bonds.
This is because the helical structure of alpha-polysaccharides allows for more surface area to be exposed to water and digestive enzymes, while the sheet-like structure of beta-polysaccharides does not.
Learn more about polysaccharides here:
https://brainly.com/question/30529578#
#SPJ11
calculate the volume (in ml) of 2.230 m sucrose containing 0.7718 moles sucrose. include units in your answer.
The volume of 2.230 m sucrose containing 0.7718 moles sucrose is 2.922 ml.
The volume of 2.230 m sucrose containing 0.7718 moles sucrose can be calculated using the following equation:
Volume (ml) = (Molarity (m) x Volume (L)) / Moles (mol)
Therefore, Volume (ml) = (2.230 m x 1L) / 0.7718 mol
Volume (ml) = 2.922 ml
The volume of 2.230 m sucrose containing 0.7718 moles sucrose, the molarity of sucrose needs to be known. Molarity is the amount of a solute that is present in one liter of a solution.
Molarity is typically expressed in terms of moles per liter (m). To calculate the volume, the equation (Molarity x Volume) / Moles is used. In this equation, Molarity is 2.230 m, Volume is 1L, and Moles is 0.7718 mol.
When these values are plugged into the equation, the resulting volume is 2.922 ml.
The volume of 2.230 m sucrose containing 0.7718 moles sucrose is 2.922 ml.
to know more about sucrose refer here:
https://brainly.com/question/29186350#
#SPJ11
If a body covers 20 m in east direction in 5 Second Calculate the velocity of a body.
v = 20/5
= 4m/s
Velocity equals distance over time.
if a second-order reaction has a half-life of 10.0 minutes when the initial reactant concentration is 0.250 m, what is the half-life when the initial concentration is 0.050 m?
The half-life of the reaction with an initial concentration of 0.050 m is 16.9 minutes,
which is longer than the half-life of 10.0 minutes when the initial concentration was 0.250 m.
The half-life of a second-order reaction depends on the initial reactant concentration.
When the initial concentration of a reactant is higher, the half-life of the reaction will be shorter; when the initial concentration of a reactant is lower, the half-life of the reaction will be longer.
Therefore, if a second-order reaction has a half-life of 10.0 minutes when the initial reactant concentration is 0.250 m, the half-life when the initial concentration is 0.050 m would be longer than 10.0 minutes.
To determine the exact half-life of the reaction with the lower initial concentration, we can use the integrated rate law for a second-order reaction:
ln[A]t = -kt + ln[A]0
In this equation, A
is the initial concentration of the reactant; and k is the reaction rate constant.
The half-life of the reaction with an initial concentration of 0.050 m, we can rearrange the equation to solve for t, the time in which the reactant concentration decreases to half of the initial concentration:
t = -(1/k) ln[0.5A0]
The initial concentration of 0.050 m, solve for t to get the half-life of the reaction with the lower initial concentration:
t = -(1/k) ln[0.5(0.050)] = 16.9 minutes
Therefore, the half-life of the reaction with an initial concentration of 0.050 m is 16.9 minutes, which is longer than the half-life of 10.0 minutes when the initial concentration was 0.250 m.
to know more about half-life refer here:
https://brainly.com/question/24710827#
#SPJ11
determine the reagents needed and the synthetic intermediate for the conversion of the given primary amine into the secondary amine.
Answer:
I needed points
Explanation:
i need them
1.5 mol nacl in 1000 g h2o.how much does the boiling point increaase due to the addition of the salt
The number of grams of NaCl to add to raise the boiling point is:
86.12g.
What is boiling temperature?Also called boiling point. The boiling point of a liquid changes with pressure. The normal boiling point is the temperature at which the vapor pressure equals normal atmospheric pressure at sea level.The temperature at which a liquid's vapor pressure equals the pressure around it and the liquid transforms into a vapor is known as the boiling point of a substance. A liquid's boiling point varies depending on the atmospheric pressure in the area.For this, ΔTb= iKb (mass of NaCl/molecular weight of NaCl×1000/mass of H2O)ΔTb = 1.5, i = 2, Kb = 0.51Molar mass of NaCl = 58.5 g/mol. For this. 1.5=2×0.51 (mass of NaCl/58.5×1000/1000)Mass of NaCl = 86.1 gramsFor more information on boiling temperature kindly visit to
https://brainly.com/question/29722100
#SPJ1
In a Lab session, you were asked to:
1. Model one of the chemical reaction types: Synthesis, Decomposition, or replacement.
2. List the elements/ compounds you used in your reaction.
3. Describe the reaction as endothermic or exothermic. Justify your answer.
4. Record a video demonstrating the modelling.
5. Explain how a closed system is suitable for your reaction. Relate your answer to law of conservation of mass.
6. During the reaction, the reactants had a potential energy of 400 KJ. As for the final products it had 200 KJ. Demonstrate the reaction by drawing the graph.
7. Identify if the reaction is an exothermic or endothermic reaction. Explain.
8. Interpret the factors that might affect your reaction rate.
1. I modeled a decomposition reaction.
2. used hydrogen peroxide (H2O2) as the compound for the reaction.
3. The reaction is exothermic. This is because the decomposition of hydrogen peroxide releases heat and energy, which can be observed through the effervescence or bubbling of the solution.
4. I recorded a video demonstrating the experiment and the resulting reaction.
5. A closed system is suitable for this reaction because it follows the law of conservation of mass, which states that mass cannot be created or destroyed, only transferred or transformed.
6. The potential energy diagram for this reaction would show the reactants at a higher energy level (400 KJ) and the products at a lower energy level (200 KJ), with the difference in energy being released as heat and energy.
7. The reaction is exothermic because it releases heat and energy, as observed through the effervescence or bubbling of the solution.
8. Factors that could affect the reaction rate include temperature, catalysts, and concentration of the reactants.
What is decomposition reaction?
A decomposition reaction is a type of chemical reaction in which a compound breaks down into two or more simpler substances. This type of reaction usually requires the addition of energy, such as heat or light, to break the bonds holding the compound together.
To know more about decomposition reaction, visit:
https://brainly.com/question/16987748
#SPJ1
a solution contains 25.0 grams of caffeine, c8h10n4)2, in a total soltuion volume of .450 l. what is the concentration of caffeine in the solution
The concentration of caffeine in the solution is 55.55 mm. To calculate this, we need to use the formula for molarity: molarity = (moles of solute) / (liters of solution). In this case, we have 25.0 grams of caffeine (C8H10N4O2), which is equal to 0.015 moles (using the molar mass of caffeine). We also have a total solution volume of 0.450 liters. Plugging this into the equation above gives us molarity = (0.015 moles of solute) / (0.450 liters of solution), which simplifies to 55.55 mm.
In terms of explanation, molarity is a unit of concentration that measures the number of moles of a given solute present in one liter of solution. The equation for molarity is simple and straightforward: molarity = (moles of solute) / (liters of solution). In order to calculate the molarity of the given solution, we first need to calculate the number of moles of caffeine in the solution, which is done by multiplying the mass of caffeine (25.0 grams) by the molar mass of caffeine (194.19 g/mol).
Then, we plug this number and the volume of the solution (0.450 liters) into the molarity equation to get the concentration of caffeine in the solution.
Overall, the concentration of caffeine in the solution is 55.55 mm.
To know more about caffeine refer here:
https://brainly.com/question/9255669#
#SPJ11
what term refers to the ability of open systems to fight off deterioration, sustain themselves and grow? a. requisite variety b. network properties c. negative entropy d. modeling techniques
The ability of open systems to fight off deterioration, sustain themselves and grow is Negative Entropy. Correct answer is option C
Negative Entropy is an important concept in thermodynamics and physics, where it is defined as a decrease in the entropy of a system. Entropy is the measure of randomness or disorder in a system, so negative entropy indicates that a system is becoming more organized, or that it is moving away from equilibrium.
This can be seen in the evolution of life, where species become more complex and adaptive over time, as well as in the growth of technology, where innovations allow us to become more efficient and productive. In essence, Negative Entropy is the power that allows open systems to improve and evolve. Therefore Correct answer is option C
Know more about thermodynamics here:
https://brainly.com/question/1368306
#SPJ11