The expected value of a $4 bet on the state's lottery is -$0.84 and the expected value of a $4 bet on the casino game is -1.7¢ (which is equivalent to -$0.017), the state's lottery is a better bet in terms of producing a higher expected value.
a. There are 10 possible choices for each of the three digits, so the total number of different selections is 10 x 10 x 10 = 1000.
b. Since there is only one winning combination out of the 1000 possible selections, the probability of winning is 1/1000.
c. If you win, your net profit would be $500 - $4 = $496.
d. The expected value is the sum of the products of each possible outcome and its probability. In this case, the expected value is (1/1000) x $500 + (999/1000) x (-$4) = -$0.84.
e. Since the expected value of a $4 bet on the state's lottery is -$0.84 and the expected value of a $4 bet on the casino game is -1.7¢ (which is equivalent to -$0.017), the state's lottery is a better bet in terms of producing a higher expected value.
This is because the expected loss for the state's lottery is smaller than the expected loss for the casino game.
Learn more about probability,
https://brainly.com/question/25839839
#SPJ11
Q1. A function f(t) that is defined as: f(t) = 1, 0 ≤ t< 1 . 0, otherwise (i) Sketch the function (ii) Find the Fourier Transform of the function f(t)
You asked to sketch the function f(t) and find its Fourier Transform, where f(t) = 1 for 0 ≤ t < 1, and f(t) = 0 otherwise.
(i) To sketch the function f(t), follow these steps:
1. Set up a coordinate system with the horizontal axis representing time (t) and the vertical axis representing the amplitude of the function (f(t)).
2. For the time interval 0 ≤ t < 1, draw a horizontal line at f(t) = 1.
3. For any other time intervals (t < 0 or t ≥ 1), draw a horizontal line at f(t) = 0.
(ii) To find the Fourier Transform of the function f(t), use the following formula:
F(ω) = ∫[f(t) * e^(-jωt)] dt, where ω is the angular frequency and the integral is evaluated over the entire domain of the function.
Since f(t) is non-zero only in the interval 0 ≤ t < 1, we can limit the integration to that interval:
F(ω) = ∫[e^(-jωt)] dt from 0 to 1.
Now, integrate the function with respect to t:
F(ω) = [-1/jω * e^(-jωt)] evaluated from 0 to 1.
Evaluate the limits of the integral:
F(ω) = [-1/jω * e^(-jω)] - [-1/jω * e^(0)].
F(ω) = (-1/jω * e^(-jω)) + (1/jω).
So, the Fourier Transform of the function f(t) is given by:
F(ω) = (1/jω) * (1 - e^(-jω)).
https://brainly.com/question/29008480
#SPJ11
Investigators measure the temperature of a body found inside a home. The body has cooled to 76.5F°. How long has it been since they died?
Answer: The cooling of a body can be modeled using Newton's Law of Cooling, which states that the rate of cooling of an object is proportional to the temperature difference between the object and its surroundings. The equation for Newton's Law of Cooling is:
T(t) = T_0 + (T_s - T_0) * e^(-kt)
where T(t) is the temperature of the body at time t, T_0 is the initial temperature of the body, T_s is the temperature of the surroundings, k is the cooling constant, and e is the base of the natural logarithm.
Assuming that the temperature of the surroundings is constant at 68°F, we can use the given information to solve for t:
76.5°F = 68°F + (T_0 - 68°F) * e^(-kt)
Simplifying this equation, we get:
8.5°F = (T_0 - 68°F) * e^(-kt)
Taking the natural logarithm of both sides, we get:
ln(8.5°F / (T_0 - 68°F)) = -kt
Solving for t, we get:
t = -ln(8.5°F / (T_0 - 68°F)) / k
The cooling constant k depends on various factors such as the body's mass, the body's surface area, and the body's initial temperature. For a human body, k is typically estimated to be around 0.00087 per minute.
Assuming that the initial temperature of the body was 98.6°F (the average temperature of a living human body), we can plug in the values and solve for t:
t = -ln(8.5°F / (98.6°F - 68°F)) / 0.00087
t ≈ 16.5 hours
Therefore, it has been approximately 16.5 hours since the person died.
Step-by-step explanation:
mrs sanchez writes the following table of x and y values on the chalkboard and asks the class to find an equation that fits the values in the table
The equation that find the values of the table is y = 2x - 2.
How to find the equation of the table?Mrs Sanchez writes the following table of x and y values on the chalkboard. Therefore, let's find the equation that fits the values of the table.
using slope intercept form for linear equation,
y = mx + b
where
m = slopeb = y-interceptHence,
m = -2 + 6 / 0 + 2
m = 4 / 2
m = 2
Therefore, lets' find the value of b, y intercepts using (0, -2)
Hence,
y = 2x + b
-2 = 2(0) + b
b = -2
Therefore, the equation is y = 2x -2
learn more on equation here: https://brainly.com/question/16501588
#SPJ1
Determine all steady-state solutions to the following differential equation.
(If there is more than one answer, use a semicolon ";" to separate them. )
y'(t) = y^2 - 15y + 56
The steady-state solutions of y'(t) =
[tex] y^2 - 15y + 56[/tex]
are y = 7 and y = 8, with y = 7 being a stable equilibrium point and y = 8 being an unstable equilibrium point.
The steady-state solutions of a differential equation are the values of the function that remain constant over time. To find the steady-state solutions of the given differential equation, we need to set y'(t) = 0 and solve for y.
[tex]y^2 - 15y + 56 = 0[/tex]
We can factor this quadratic equation as (y-7)(y-8) = 0, so the steady-state solutions are y = 7 and y = 8. These values are called equilibrium points or fixed points because if y(t) starts at one of these values, it will remain there as time goes on.
To understand the behavior of the system around these steady-state solutions, we can use the first derivative test. If y'(t) > 0 for y < 7 or y > 8, then y(t) is increasing and moving away from the steady-state solution. If y'(t) < 0 for 7 < y < 8, then y(t) is decreasing and moving towards the steady-state solution. Hence, y = 7 is a stable equilibrium point, and y = 8 is an unstable equilibrium point.
Learn more about equilibrium here:
https://brainly.com/question/31490124
#SPJ4
1. You are given the diameter and height of a paper cone cup.
Find the volume of the cone. Use 3.14 for pi. Round your
answer to the nearest tenth of a cubic centimeter.
2.8 cm
9 cm
The approximated value of the volume of the cone cup is 18.5 cubic cm
Finding the volume of the cone cupFrom the question, we have the following parameters that can be used in our computation:
Diameter = 2.8 cm
Height = 9 cm
The volume of the cone cup is calculated as
Volume = 1/3 * 3.14 * r^2h
substitute the known values in the above equation, so, we have the following representation
Volume = 1/3 * 3.14 * (2.8/2)^2 * 9
Evaluate the products
So, we have
Volume = 18.4632
Approximate
Volume = 18.5
Hence, the volume is 18.5
Read more about volume
https://brainly.com/question/463363
#SPJ1
Given that L{J.(t)} =1/√s²-1
where Jo(t) = n=0Σ[infinity](-1)^n/(n!)² (t/2)^2n transform of tJo(t). L{tJo(t)} =
The Laplace transform of tJo(t) is s / (s^2 - 1)^(3/2).
To find the Laplace transform of tJo(t), we can use the following formula:
L{t^n f(t)} = (-1)^n F^(n)(s)
where F(s) is the Laplace transform of f(t) and F^(n)(s) denotes the nth derivative of F(s) with respect to s.
Using this formula with f(t) = Jo(t), we have:
L{tJo(t)} = -d/ds [ L{Jo(t)} ]
We can find L{Jo(t)} by using the formula for the Laplace transform of Jo(t):
L{Jo(t)} = 1 / sqrt(s^2 - 1)
Taking the derivative of both sides with respect to s, we get:
d/ds [ L{Jo(t)} ] = d/ds [ 1 / sqrt(s^2 - 1) ]
= (-1/2) (s^2 - 1)^(-3/2) (2s)
= -s / (s^2 - 1)^(3/2)
Substituting this result back into our original equation, we get:
L{tJo(t)} = -d/ds [ L{Jo(t)} ]
= -d/ds [ 1 / sqrt(s^2 - 1) ]
= s / (s^2 - 1)^(3/2)
Therefore, the Laplace transform of tJo(t) is s / (s^2 - 1)^(3/2).
To learn more about Laplace visit:
https://brainly.com/question/14487937
#SPJ11
Write the equation of the line that passes through the points (-7,5) and (0,7). Put your answer in fully reduced point-slope form, unless it is a vertical or horizontal line
The equation of the line that passes through the points (-7,5) and (0,7) is equals to [tex] y = \frac{2}{7} x + 7 [/tex] and in point-slope form 7( y - 5) = 2( x +7).
The equation of a straight line is y = mx+ c, where, m is slope of line
c is known as the y -intercept.Point-slope form of equation of line is written as y – y₁ = m(x – x₁), where
y is coordinate of second pointy₁ is coordinate of first pointx is coordinate of second pointx₁ is coordinate of first pointm is slopeWe have a line that passes through the points say A(-7,5) and B(0,7). We have to write an equation of line in point-slope form. Now, slope of line, [tex]m = \frac{ y_2 - y_1}{x_2- x_1}[/tex]
here, x₁ = -7, y₁ = 5, x₂ = 0, y₂ = 7
=> [tex]m = \frac{ 7 - 5}{0 + 7}[/tex]
[tex]= \frac{2}{7}[/tex]
Using the point slope equation of a line passes through A(-7,5) and B(0,7) is y – y₁ = m(x – x₁).
Substitute all known values, [tex]y - 5 = \frac{2}{7}( x + 7) [/tex]
Cross multiplication, 7( y - 5) = 2( x +7)
=> 7y - 35 = 2x + 14
=> 7y = 2x + 14 + 35
=> 7y = 2x + 49
=> [tex] y = \frac{2}{7} x + 7 [/tex]
Hence, required equation is [tex] y = \frac{2}{7} x + 7 [/tex] but in point slope form 7( y - 5) = 2( x +7).
For more information about equation of line, visit :
https://brainly.com/question/25969846
#SPJ4
What is the median for the following set of data?
2, 3, 8, 12, 14, 15, 16
A. 14
B. 13
C. 16
D. 12
Answer:
the median is D) 12
Step-by-step explanation:
First of all what it median
median is the value in the middle of a data set.
For example:- The median of 2,3,4 is 3. In Maths, the median is also a type of average, which is used to find the centre value.
A study was conducted to determine the differences in the average weight loss of four groups of individuals: (1) keto diet (2) gym (3) no exercise; and (4) Intermittent.
a.Conduct the relevant tests and provide the conclusions for the study.
b.Provide a brief explanation (3 – 5 sentences) of your study and hypothesis test findings using language as appropriate for a client who is intelligent but is not knowledgeable about statistics. Include figures and tables as you think is appropriate
c
It's important to note that individual results may vary, and it's advisable to consult with a healthcare professional or nutritionist before starting any weight loss program.
(a) To conduct the relevant tests to determine the differences in average weight loss among the four groups, we can use Analysis of Variance (ANOVA) test. ANOVA compares the means of multiple groups to determine if there are significant differences.
After performing the ANOVA test, if we find that there is a significant difference among the means of the four groups, we can conclude that there are differences in average weight loss between the groups. This indicates that the different approaches (keto diet, gym, no exercise, intermittent) have a significant impact on weight loss outcomes.
On the other hand, if the ANOVA test does not reveal a significant difference, we would conclude that there is no evidence of a difference in average weight loss between the groups. In this case, we would not have enough evidence to conclude that the different approaches have distinct effects on weight loss.
The specific conclusions of the study would depend on the results of the ANOVA test and the significance level chosen for the study.
(b) In our study, we investigated the differences in average weight loss among four groups of individuals: those following a keto diet, those going to the gym, those not engaging in any exercise, and those practicing intermittent fasting. We wanted to understand if these different approaches had an impact on weight loss outcomes.
After analyzing the data using statistical methods, we found that there were significant differences in average weight loss among the four groups. This means that the approach individuals take to weight loss does make a difference.
To help visualize the results, we have prepared a bar chart (Figure 1) displaying the average weight loss for each group. As you can see, the group following the keto diet achieved the highest average weight loss, followed by the intermittent fasting group. The gym group also showed significant weight loss compared to the no exercise group.
Overall, our findings suggest that selecting the right approach, such as a keto diet or intermittent fasting, can lead to more substantial weight loss compared to no exercise or less structured methods. It's important to note that individual results may vary, and it's advisable to consult with a healthcare professional or nutritionist before starting any weight loss program.
To learn more about weight visit:
https://brainly.com/question/32037870
#SPJ11
Hello me please asapppp
Answer: 9.2
Step-by-step explanation:
Pythagorean theorem = A^2+B^2=C^2
x^2+6^2=11^2…. Putting the equation into math-way. com
x=9.2159444
Rounded 9.2
Find an explicit formula for Fibonacci numbers, where the recurrence relation for In = {n-1 + fn-2, where fo = 0, fi = 1. 11. Solve the following recurrence relations (a) On=7an-1 -10am-2. (b) Qn=2
The solution to the recurrence relation is:
[tex]Qn = (1/2)(2^n) - (1/2)[/tex]
To find an explicit formula for the Fibonacci sequence, we first write out the first few terms:
[tex]f0 = 0[/tex]
[tex]f1 = 1[/tex]
[tex]f2 = 1[/tex]
[tex]f3 = 2[/tex]
[tex]f4 = 3[/tex]
[tex]f5 = 5[/tex]
[tex]f6 = 8[/tex]
...
We notice that each term is the sum of the two preceding terms. Therefore, we can write:
[tex]fn = fn-1 + fn-2[/tex]
Let's solve this recurrence relation to find an explicit formula for the nth term. First, we write out the first few terms in terms of f1 and f0:
[tex]f2 = f1 + f0[/tex]
[tex]f3 = f2 + f1 = f1 + f0 + f1 = 2f1 + f0[/tex]
[tex]f4 = f3 + f2 = 3f1 + 2f0[/tex]
[tex]f5 = f4 + f3 = 5f1 + 3f0[/tex]
[tex]f6 = f5 + f4 = 8f1 + 5f0[/tex]
We can see that the coefficients of f1 and f0 are the Fibonacci numbers themselves (1, 1, 2, 3, 5, 8, ...). Therefore, we can write the explicit formula:
[tex]fn = (1/√5) [(1+√5)/2]^n - (1/√5) [(1-√5)/2]^n[/tex]
(a) To solve the recurrence relation [tex]On = 7On-1 - 10On-2[/tex], we first find the roots of the characteristic equation:
[tex]r^2 = 7r - 10[/tex]
[tex]r = (7 ± √(7^2 + 40))/2[/tex]
[tex]r1 = 5, r2 = -2[/tex]
Therefore, the general solution to the recurrence relation is:
[tex]On = c1(5^n) + c2(-2^n)[/tex]
We can find the values of c1 and c2 by using the initial conditions:
[tex]O0 = 1, O1 = 5[/tex]
[tex]c1 + c2 = 1[/tex]
[tex]5c1 - 2c2 = 5[/tex]
Solving these equations, we get:
[tex]c1 = 1, c2 = -1/3[/tex]
Therefore, the solution to the recurrence relation is:
On = 5^n - (1/3)(-2)^n
(b) To solve the recurrence relation Qn [tex]= 2Qn-1 + 1[/tex], we first find the root of the characteristic equation:
[tex]r - 2 = 0[/tex]
[tex]r = 2[/tex]
Therefore, the general solution to the recurrence relation is:
Qn = c(2^n) + d
We can find the values of c and d using the initial conditions:
[tex]Q0 = 0, Q1 = 1[/tex]
[tex]c + d = 0[/tex]
[tex]2c + d = 1[/tex]
Solving these equations, we get:
[tex]c = 1/2, d = -1/2[/tex]
Therefore, the solution to the recurrence relation is:
Qn [tex]= (1/2)(2^n) - (1/2)[/tex]
To learn more about recurrence visit:
https://brainly.com/question/24761233
#SPJ11
is the data set approximately periodic? if so, what are its period and amplitude? identify whether the data set is approximately periodic and, if so, determine the period and amplitude. responses not periodic not periodic periodic with period of 3 and amplitude of about 7.5 periodic with period of 3 and amplitude of about 7.5 periodic with period of 4 and amplitude of about 7.5 periodic with period of 4 and amplitude of about 7.5 periodic with period of 4 and amplitude of about 5 periodic with period of 4 and amplitude of about 5
To determine whether a data set is approximately periodic, we need to look for patterns that repeat over time. If we see a consistent pattern in the data that repeats with some regularity, then we can say that the data set is approximately periodic.
If the data set is approximately periodic, we also need to determine its period and amplitude. The period is the time it takes for the pattern to repeat, while the amplitude is the distance between the highest and lowest points of the pattern.
Without more information about the data set, it's difficult to say for certain whether it's approximately periodic. However, if we assume that it is, we can make some educated guesses about its period and amplitude.
Based on the information given, it's possible that the data set has a period of either 3 or 4, and an amplitude of about 5 or 7.5. It's difficult to be more precise without seeing the data itself.
In summary, the data set may be approximately periodic with a period of either 3 or 4, and an amplitude of about 5 or 7.5. However, without more information, we can't say for certain whether it's truly periodic.
To determine if the data set is approximately periodic, you need to look for repeating patterns in the data. A periodic data set will have a constant period and amplitude throughout.
Period refers to the interval between repetitions, while amplitude is the maximum value of the fluctuation from the average value.
Unfortunately, you didn't provide a specific data set for me to analyze. However, I can provide you with a general explanation of how to identify periodicity and determine the period and amplitude.
1. Observe the data set to see if there are any repeating patterns.
2. If a pattern is present, find the interval between repetitions - this is the period.
3. Determine the difference between the maximum and minimum values in the pattern.
4. Divide this difference by 2 to find the amplitude.
Once you have applied these steps to your data set, you can compare your results to the provided options to find the best match.
Learn more about :
Data set : brainly.com/question/1156334
#SPJ11
Show all work. Answers without justification will receive "0" credit. 7/2 = 4 + sin0
There must be a mistake or typo in the expression.
We can evaluate the expression 7/2 = 4 + sin0 as follows:
sin0 is the sine of 0 degrees, which is equal to 0. Therefore, the expression simplifies to:
Now, we can compare this value to the left-hand side of the equation, which is 7/2. Since 7/2 is not equal to 4, we can conclude that the equation is not true.
7/2 = 4 + 0
Next, we can simplify the right side of the equation by combining like terms:
4 + 0 = 4
So, the equation becomes:
7/2 = 4
To check if this is true, we can multiply both sides by 2:
7/2 × 2 = 4 × 2
Simplifying:
7 = 8
Since 7 is not equal to 8, we know that the original equation 7/2 = 4 + sin0 is not true. Therefore, there must be a mistake or typo in the expression.
To learn more about expression visit:
https://brainly.com/question/14083225
#SPJ4
7. [-/1 Points]DETAILS MY NOTES ASK YOUR TEACHER PRACTICE ANOTHER
The length of time it takes to find a parking space at 9 A.M. follows a normal distribution with a mean of 5 minutes and a standard deviation of 3 minutes.
Eighty percent of the time, it takes more than how many minutes to find a parking space? (Round your answer to two decimal places.)
min
Additional Materials
Reading
80% of the time it takes more than 7.52 minutes to find a parking space at 9 A.M.
We can solve this problem by using the inverse normal distribution. We want to find the value of x such that P(X > x) = 0.8, where X is the time it takes to find a parking space.
First, we standardize the distribution: Z = (X - μ) / σ, where μ = 5 and σ = 3. Thus, we want to find the value of z such that P(Z > z) = 0.8.
Using a standard normal distribution table or a calculator, we can find that the z-value corresponding to a cumulative probability of 0.8 is approximately 0.84.
So, we have:
0.84 = (X - 5) / 3
Solving for X, we get:
X = 0.84(3) + 5 = 7.52
Therefore, 80% of the time it takes more than 7.52 minutes to find a parking space at 9 A.M.
To learn more about cumulative visit:
https://brainly.com/question/15088938
#SPJ11
I WILL GIVE YOU BRAINLIEST FOR FAST ANSWER!!!!!!!!!!!
ABCD is a trapezium with AB ║DC what is the area of the trapezium?
Answer:
15h cm²--------------------------
Area of a trapezoid formula:
A = (b₁ + b₂)h/2We have the following values as per picture:
Base 1 is b₁= 12 cm,Base 2 is b₂ = (12 + 2 + 4) cm = 18cm,Height is h.Substitute the given values into formula to get the area:
A = (12 + 18)h/2 = 30h/2 = 15h cm²Hence the area of the trapezoid is 15h cm².
Answer:
15h cm²
Step-by-step explanation:
<3
75 divided by 5 im just not figuring it out and i don twant to write it down
Answer: it would be 15
Step-by-step explanation:
to do this add 15 five times and you will get 75
just tell the teacher that you started at ten and then when you got to 15 it worked. orrrr... you know there is 60 minutes in an hour and you know that it can be divided by 4 to equal 15 so you added 15 one more time and got 75
A. A rectangular loop of length 40 cm an width 10 cm with a 25 ohm light bulb is pulled from a large magnetic field (3. 5 T) very quickly (25 m/s). The light flashes as the circuit leaves the field. How long does the flash of light last in ms?
b. Which way does current flow as the loop exits the field? Why?
clock-wise
counter clock-wise
c. What is the power dissipated in the bulb during the flash in W?
a) The light flashes as the circuit leaves the field at a speed of 16 ms.
b) The current flow as the loop exits the field in the clockwise direction.
c) The power dissipated in the bulb during the flash is 0.04 W.
To reply to these questions, we will utilize Faraday's Law, which states that a changing attractive field actuates an electromotive drive (EMF) in a circuit, and the initiated EMF is rise to the rate of alter of attractive flux through the circuit.
a) The attractive flux through the circle is given by the item of the attractive field, region of the circle, and cosine of the point between the attractive field and the ordinary to the plane of the circle.
As the circle is pulled out of the attractive field, the magnetic flux through the circle diminishes, and thus, an EMF is actuated within the circle. This initiated EMF drives a current through the light bulb, causing it to light up.
The time term of the streak of light can be decided from the time taken by the circle to move out of the attractive field.
The removal voyage by the circle is 40 cm, and the speed is 25 m/s, so the time taken is:
t = d/v = 0.4 m / 25 m/s = 0.016 s = 16 ms
Subsequently, the streak of light endures for 16 ms.
b) Concurring to Lenz's Law, the course of the initiated current is such that it contradicts the alter within the attractive flux that produces it. As the circle is pulled out of the attractive field, the attractive flux through the circle diminishes.
Hence, the actuated current flows in a course that makes a magnetic field that restricts the initial attractive field. This could be accomplished by the induced current streaming clockwise as seen from above. Hence, the reply is clockwise.
c) The control scattered within the light bulb can be calculated utilizing the equation P = V²/R, where V is the voltage over the bulb and R is its resistance.
The voltage over the bulb is break even with to the initiated EMF, which can be calculated from Faraday's Law. The attractive flux through the circle changes at a rate of (40 cm) x (25 m/s) = 1 T.m²/s.
The region of the circle is (40 cm) x (10 cm) = 0.04 m². The cosine of the point between the attractive field and the ordinary plane of the circle is 1 (since the circle is opposite to the field). Subsequently, the induced EMF is:
EMF = -d(phi)/dt = -NA(dB/dt)
= -(1)(0.04 m²)(1 T.m²/s)/0.016 s
= -1 V
The negative sign indicates that the actuated EMF is within the inverse course of the current stream. Subsequently, the voltage over the light bulb is:
V = -EMF = 1 V
The power dissipated within the bulb is:
P = V²/R = (1 V)²/25 ohm = 0.04 W
Subsequently, the control scattered within the bulb during the streak is 0.04 W.
To know more about rectangular loops refer to this :
https://brainly.com/question/31504470
#SPJ4
Please help ASAP!! I need to finish this today
Answer:
Step-by-step explanation:
Stem leaf plots are read from top to bottom
The center columned number is the first digit in the number, your 10's place (stem)
The other numbers to right and left are the leaves. and will be your ones place.
So the list of numbers for seaside would be
05, 08
10, 11, 12, 15, 16, 18
25, 25, 27, 27, 28
30 and 36
Put them in a line and find the middle number I counted, on the chart to 7. I counted the (5, 8, 0, 1, 2, 5, 6) 6 was my 7th number with a one in front making it 16
Numbers for Bayside (reads somewhat backwards) since leaves go towards left
05, 06, 08
10, 12, 14, 15, 16, 18
20, 20, 22, 23, 25
42
no leaves in front of 3 on this side so no numbers for 30's
Count 7 and that's 15
Since there are 15 for each school, count 7 numbers and that's your middle number for each
Bayside 15
Seaside 16
Variability is range of numbers
Bayside goes from 5 to 42 so 42-5=38
Seaside 36-5=31
Answer:
31
Step-by-step explanation:
Since there are 15 for each school, count 7 numbers and that's your middle number for each
Bayside 15
Seaside 16
Variability is range of numbers
Bayside goes from 5 to 42 so 42-5=38
Seaside 36-5=31
A heptagon has perimeter 99 feet. Four of the sides are the same length, and the remaining sides are half as long. How long are the shorter sides? The shorter sides are how many feet
The shorter sides of heptagon as 9 feet each based on the relation, length of longer sides and total length.
Let the three shorter sides of heptagon (with seven sides) be of x feet. Hence, the remaining four sides will be of 2x feet. Now, sum of their lengths is stated thus, representing them as equation
(4 × 2x) + 3x = 99
Solving the bracket first
8x + 3x = 99
Adding the values on Left Hand Side of the equation
11x = 99
Rewriting the equation in terms of x
x = 99/11
Performing division on Right Hand Side of the equation
x = 9
Hence, the length of shorter sides is 9 feet each.
Learn more about heptagon -
https://brainly.com/question/30779332
#SPJ4
a die is rolled and a coin is tossed. find the probability that the die shows an odd number and the coin shows a head.
a. 1/2
b. 1/3
c. 1/4
d. 1/5
The probability of rolling an odd number on a die and getting a head on a coin toss is 1/4. Therefore, the correct answer is (c) 1/4.
The probability of two independent events occurring simultaneously: rolling an odd number on a die and getting a head on a coin toss. To find the probability, we'll multiply the probabilities of each event.
1. Probability of rolling an odd number on a die:
There are 3 odd numbers (1, 3, 5) and 6 possible outcomes (1, 2, 3, 4, 5, 6). So the probability is 3/6, which simplifies to 1/2.
2. Probability of getting a head on a coin toss:
There are 2 possible outcomes (heads or tails), and 1 of them is heads. So the probability is 1/2.
Now, we'll multiply the probabilities: (1/2) * (1/2) = 1/4.
So the probability of rolling an odd number on a die and getting a head on a coin toss is 1/4. Therefore, the correct answer is (c) 1/4.
leran more about probability
https://brainly.com/question/24131141
#SPJ11
Discrete Structures in Mathematics(b) Solve the recurrence relation An = 6an-1 – 9an-2 = with initial conditions ao = 2 and ai = 3. [6 marks]
First, let me explain some key terms related to the question.
- Discrete: This refers to mathematics that deals with countable or finite sets of numbers, rather than continuous sets. In other words, we're dealing with specific, separate values rather than a continuous range.
- Recurrence: This refers to a mathematical sequence where each term depends on one or more previous terms. In other words, we can use a formula to generate the next term based on previous terms.
- Relation: This refers to a mathematical expression that relates one or more variables. In this case, our recurrence relation relates the sequence An to its previous terms.
With that in mind, let's tackle the question!
We're given a recurrence relation: An = 6An-1 – 9An-2. This means that each term in the sequence An depends on the two previous terms, An-1 and An-2.
We're also given initial conditions: a0 = 2 and a1 = 3. This gives us a starting point for the sequence.
To solve the recurrence relation and find the values of An, we'll use a technique called iteration. Essentially, we'll use the recurrence relation to generate the next term in the sequence, then use that term to generate the next one, and so on.
Here's how it works:
- First, we use the initial conditions to find the first two terms of the sequence: a0 = 2 and a1 = 3.
- Next, we use the recurrence relation to generate the third term: a2 = 6a1 - 9a0 = 6(3) - 9(2) = 0.
- We continue this process, using the recurrence relation to generate each subsequent term. For example, to find a3, we use the formula An = 6An-1 – 9An-2 with n = 3: a3 = 6a2 - 9a1 = 6(0) - 9(3) = -27.
- We can keep going like this to find as many terms as we need.
Here's what the first few terms of the sequence look like:
a0 = 2
a1 = 3
a2 = 0
a3 = -27
a4 = -54
a5 = -162
a6 = -270
...
Discretehttps://brainly.com/question/31359635
#SPJ11
Lim f(x) = 2 and lim f(x) = 2, but f(6) does not exist. X+6 X-+6* What can you say about lim f(x)? 6 lim f(x) X-6 O A. Is - 2 B. Does not exist C. Is oo D. Is 2
From the side limits of function, f(x), [tex]\lim_{x→ 6^{+}} f(x)= \lim_{ x→6^{- }} f(x) = 2, the limit value of function f(x) when x approaches to 6, [tex] \lim_{x →6} f(x) \\ [/tex] is equals to 2. So, option (d) is right one.
In Calculus a part of mathematics, a limit is the value that a function approaches when its input approaches some other value. That f(x) be approaches L when x approaches 0 then L is called limit of f(x).
Also, limit of a function f(x) if and only if the one sided limits of the function are equal, [tex] \lim_{ x → c} f(x) = L \\ [/tex] iff
[tex] \lim_{ x → c^- } f(x) = \lim_{ x → c^+} f(x) = L \\ [/tex]. We have a limit function f(x) the right hand and left hand limits are defined as, [tex] \lim_{x → 6^{-}} f(x) = 2 \\ [/tex], [tex] \lim_{ x → 6^{+}} f(x) = 2\\ [/tex]
but f( 6) does not exist.
We have to determine the value [tex] \lim_{ x → 6} f(x) \\ [/tex]. From above definition of limit of a function exist, if and only if RHS and LHS limits exist and equal. Here, both RHS and LHS limits are exist and equal so, [tex]\lim_{x→ 6} f(x) = lim_{x→ 6 ^{+}}f(x) = \lim_{x → 6^{-}} f(x) = 2.\\ [/tex] Hence, required value is equals to 2.
For more information about limit, refer :
https://brainly.com/question/30679261
#SPJ4
Complete question:
[tex] \lim_{ x -> 6^{ - } } f(x) = 2 \\ [/tex]
and
[tex]\lim_{x --> 6 ^{ + } } f(x) = 2, \\ [/tex]
but f(6) does not exist. What can you say about
[tex] \lim_{x--> 6} f(x) \\ [/tex]
?
A. Is - 2
B. Does not exist
C. Is oo
D. Is 2
Evaluate: summation from n equals 4 to 10 of 15 times 3 tenths to the n minus 1 power period Round to the nearest hundredth.
a
0.58
b
1.92
c
6.42
d
9.43
Answer:olution:. Given data:. Answer:. sum_(n=4)^10 15(3/10)^(n-1)= sum_(n=4)^10 15(0.3)^(n-1) = 15 [(0.3)^3 + (0.3)^4 + (0.3)^5+ (0.3)^6 + (0.3)^7+ (0.3)^8 + ...
Doesn’t include: 0.58 b 1.92 c 6.42 d 9.43
Evaluate: summation from n equals 4 to 10 of 15 times 3 tenths to the n minus 1 power period Round to the nearest hundredth.
Step-by-step explanation:Example
Evaluate X
4
r=1
r
3
.
Solution
This is the sum of all the r
3
terms from r = 1 to r = 4. So we take each value of r, work out
r
3
in each case, and add the results. Therefore
X
4
r=1
r
3 = 13 + 23 + 33 + 43
= 1 + 8 + 27 + 64
= 100 .
Example
Evaluate X
5
n=2
n
2
.
Solution
In this example we have used the letter n to represent the variable in the sum, rather than r.
Any letter can be used, and we find the answer in the same way as before:
X
5
n=2
n
2 = 22 + 32 + 42 + 52
= 4 + 9 + 16 + 25
= 54 .
Example
Evaluate X
5
k=0
2
k
.
imagine that the sensitivity for a covid-19 test was 0.7, the specificity was 0.85, and the unconditional probability of a patient having the disease was 0.04. if such a patient tests positive, which is closest to the probability that they have the disease? group of answer choices 0.09 0.16 0.7 0.85 0.94
The closest answer choice to the probability that a patient has the disease given a positive test result is 0.16.
To determine the probability that a patient has the disease given a positive test result, we need to use Bayes' theorem:
[tex]P_{(disease| positive test)} = P_{(positive test)} \times P_{(disease)} / P_{(positive test)}[/tex]
where,
[tex]P_{(disease |positive test)}[/tex] = probability of having the disease given a positive test result
[tex]P_{(positive test|disease)[/tex] = sensitivity = 0.7
[tex]P_{ (disease)[/tex] = unconditional probability of having the disease = 0.04
[tex]P_{(positive test)} = probability of testing positive = (P_{(positive test |disease)}\times P_{(disease)}) + (P_{(positive test |no disease)}\times P_{(no disease)})[/tex]
To calculate P(positive test |no disease), we need to use the specificity of the test, which is:
[tex]P_{(negative test |no disease)}[/tex] = specificity = 0.85
Therefore,
[tex]P_{(positive test |no disease)} = 1 - P_{(negative test |no disease)} = 1 - 0.85 = 0.15[/tex]
And,
[tex]P_{(positive test)} = (0.7 \times 0.04) + (0.15 \times 0.96) = 0.0676[/tex].
Now we can calculate the probability of having the disease given a positive test result as follows:
[tex]P_{(disease |positive test)} = 0.7 \times 0.04 / 0.0676 = 0.413.[/tex]
For similar question on probability.
https://brainly.com/question/24055383
#SPJ11
Solve the system below.
3x+2y =6
y = −3/2x−4
First, we must put the first equation in slope-intercept form. When we do that, we get
A.y=3/2x+3
B.y=-3/2x-4
C.y=3/2x+2
D.y=-3/2x+3
E.y=-3x+6
What is the value of the expression below when x=3x=3? 7x^2 +9x-3 7x 2 +9x−3
The value of equation 7x² + 9x - 3 for x= 3 is 87.
We have the equation
7x² + 9x - 3.
Now, put the value of x = 3 in the given equation we get
7x² + 9x - 3.
= 7(3)² + 9(3) - 3.
=7(9) + 27- 3
= 63 - 3 + 27
= 60 + 27
= 87
Thus, the required value is 87.
Learn more about equation here:
https://brainly.com/question/29657983
#SPJ1
87 will be the value of the given expression when x= 3.
To find the value of the expression 7x^2 + 9x - 3 when x=3, we substitute x=3 into the expression and simplify:
7(3)^2 + 9(3) - 3
= 7(9) + 27 - 3
= 63 + 24
= 87
Therefore, the value of the expression 7x^2 + 9x - 3 when x=3 is 87.
Learn more about expression here:
https://brainly.com/question/14083225
#SPJ1
The given differential equation (2D^2 + 12D + 2)y=0 is_______. a. Overdamping b. 2 c. critical damping d. underdamping Question 2 Not yet answered Marked out of 2.00 Qequation 3 (3D^2 + 6D + 7)y = sin x a. 7 b. stable c. unstable d. none of these
The answer is (d) none of these.
For the differential equation (2D^2 + 12D + 2)y = 0,
The characteristic equation is: 2r^2 + 12r + 2 = 0
Solving this quadratic equation using the quadratic formula, we get:
r = (-12 ± sqrt(12^2 - 4(2)(2))) / (2(2))
r = (-6 ± sqrt(32)) / 2
r = -3 ± sqrt(8)
The roots of the characteristic equation are complex conjugates, which means that the solution to the differential equation will be of the form:
y = e^(-3x) (c1 cos(sqrt(8)x) + c2 sin(sqrt(8)x))
The damping ratio is given by:
ζ = (c * n) / (2 * sqrt(a))
where c is the damping coefficient, n is the natural frequency, and a is the coefficient of the second derivative term.
In this case, c = 12, n = sqrt(8), and a = 2. Substituting these values into the above formula, we get:
ζ = (12 * sqrt(8)) / (2 * sqrt(2))
ζ = 6
Since the damping ratio ζ is greater than 1, the system is overdamped.
Therefore, the answer is (a) Overdamping.
For the differential equation (3D^2 + 6D + 7)y = sin(x),
The characteristic equation is: 3r^2 + 6r + 7 = 0
Using the quadratic formula, we can see that the roots of the characteristic equation are complex conjugates, which means that the solution to the differential equation will be of the form:
y = e^(-3x) (c1 cos(sqrt(2)x) + c2 sin(sqrt(2)x))
Since the real part of the roots of the characteristic equation is negative, the system is stable
However, the right-hand side of the differential equation is not of the form that matches with the solution, which means that the system is not able to respond to the input sin(x).
Therefore, the answer is (d) none of these.
To learn more about characteristic visit:
https://brainly.com/question/920068
#SPJ11
is searching online for airline tickets. Two weeks ago, the cost to fly from Hartford to Boston was $210. Now the cost is $310. What is the percent increase? What would be the percent increase if the airline charges an additional $50 baggage fee with the new ticket price?
The original price of the ticket was $210 and the new price is $310.
To find the percentage increase, we can use the formula:
percentage increase = (new price - old price) / old price * 100%
So, the percentage increase in the ticket price is:
percentage increase = (310 - 210) / 210 * 100% = 47.62%
Therefore, the ticket price has increased by 47.62%.
If the airline charges an additional $50 baggage fee with the new ticket price of $310, then the new price will be $360.
To find the new percentage increase, we can use the same formula:
percentage increase = (new price - old price) / old price * 100%
So, the percentage increase in the ticket price with the additional $50 baggage fee is:
percentage increase = (360 - 210) / 210 * 100% = 71.43%
Therefore, the ticket price has increased by 71.43% with the additional $50 baggage fee.
Answer:
Percent Increase= 47.619% increase, With $50 baggage fee= 71.4286% increase
Step-by-step explanation:
Solve the system below, using substitution.
x + 2y = 1
x=y - 2
The value of system of equations are,
⇒ x = - 1 and y = 1
We have to given that;
The system of equations are,
x + 2y = 1 .. (i)
x = y - 2 .. (ii)
Now, We can plug the value of x in (i);
x + 2y = 1
(y - 2) + 2y = 1
3y - 2 = 1
3y = 3
y = 1
And, From (ii);
x = y - 2
x = 1 - 2
x = - 1
Thus, The value of system of equations are,
⇒ x = - 1 and y = 1
Learn more about the mathematical expression visit:
brainly.com/question/1859113
#SPJ1
SAT scores were originally scaled so that the scores for each section were approximately normally distributed with a mean of 500 and a standard deviation of 100. Use the empirical rule to estimate the probability that a randomly-selected student gets a section score of 700 or better.
Answer:
Assuming that the distribution of section scores is still approximately normal with a mean of 500 and a standard deviation of 100, we can use the empirical rule (also known as the 68-95-99.7 rule) to estimate the probability that a randomly-selected student gets a section score of 700 or better.
According to the empirical rule, approximately 68% of the scores fall within one standard deviation of the mean, approximately 95% of the scores fall within two standard deviations of the mean, and approximately 99.7% of the scores fall within three standard deviations of the mean.
To estimate the probability of getting a section score of 700 or better, we need to find the proportion of scores that are more than two standard deviations above the mean.
Z-score = (X - μ) / σ = (700 - 500) / 100 = 2
From the standard normal distribution table, we find that the proportion of scores that are more than 2 standard deviations above the mean is approximately 0.0228.
Therefore, the estimated probability that a randomly-selected student gets a section score of 700 or better is about 0.0228, or 2.28%.
Step-by-step explanation: