in an endothermic reaction, the total energy at the beginning of the reaction is group of answer choices less than the total energy at the end of the reaction. greater than the total energy at the end of the reaction. equal to the total energy at the end of the reaction. none of the above

11.2 moles of [tex]\rm O_2[/tex] are required to react completely with 3.2 moles of [tex]\rm C_2H_6[/tex]. Therefore option D is correct.

The balanced chemical equation for the complete combustion of [tex]\rm C_2H_6[/tex] (ethane) with oxygen (O2) is: 2 [tex]\rm C_2H_6 + 7 O_2\ - > 4 CO_2 + 6 H_2O[/tex]

From the balanced equation, we can see that 2 moles of [tex]\rm C_2H_6[/tex] react with 7 moles of [tex]\rm O_2[/tex]. To find out how many moles of [tex]\rm O_2[/tex] are required to react completely with 3.2 moles of [tex]\rm C_2H_6[/tex], we can set up a proportion:

(7 moles [tex]\rm O_2[/tex] / 2 moles [tex]\rm C_2H_6[/tex]) = (x moles [tex]\rm O_2[/tex] / 3.2 moles [tex]\rm C_2H_6[/tex])

Solving for x:

x = (7 moles [tex]\rm O_2[/tex] / 2 moles [tex]\rm C_2H_6[/tex]) * 3.2 moles [tex]\rm C_2H_6[/tex]

x = 11.2 moles [tex]\rm O_2[/tex]

So, 11.2 moles of [tex]\rm O_2[/tex] are required to react completely with 3.2 moles of [tex]\rm C_2H_6[/tex]. Therefore, the correct answer is 11.2 moles of [tex]\rm O_2[/tex].

Therefore option D is correct.

Know more about stoichiometry:

https://brainly.com/question/28780091

#SPJ12

Answer:

91

Explanation:

ok

a) The length of the second order for this reaction in minutes is 142.

b) The concentration of SO2(g) after 4.3 min with an initial concentration of SO2Cl2 of 2.089 M is 0.834 M.

a) To calculate the length of the second order, we use the equation t1/2 = ln2/k, where k is the rate constant. Substituting

k = 1.56e-04 s-1,

we get

t1/2 = ln2/1.56e-04 s-1

= 4425 s.

Converting to minutes, we get

tz = 4425 s/60 s/min

= 142 min.

b) To calculate the concentration of SO2(g) after 4.3 min, we use the integrated rate law for a first-order reaction, which is

ln([A]t/[A]0) = -kt.

We can rearrange this equation to solve for

[A]t: [A]t = [A]0e^(-kt).

Substituting the given values, we get

[SO2]t = 2.089 M * e^(-1.56e-04 s-1 * 4.3 min * 60 s/min) = 0.834 M.

To learn more about initial concentration, here

https://brainly.com/question/30609774

#SPJ4

The complete question is:

The decomposition of SO2Cl2 is first order in SO2Cl2 and has a rate constant of 1.56e - 04 s-1 at a certain temperature: SO2Cl2(g) → SO2(g) + Cl2(g)

a) What is the length of the second tą for this reaction in minutes? tz (min) = number (rtol=0.03, atol=1e-08)

b) If the initial concentration of SO2Cl2 is 2.089 M, what is the concentration of SO2(g) after 4.3 min.?

2NaCl --> 2Na + Cl2 but I have never seen something this reaction happening

The repetition of the exercise over time is the IV (independent variable) in this example of an experimental design.

Exercise is physical activity that is done to maintain or improve one's physical health and fitness. It usually entails exercises like jogging, running, cycling, swimming, weightlifting, or taking part in sports.

Adam is experimenting with the IV to see whether it has an impact on the DV (dependent variable), which is the number of times he can open and shut the clothes pin using only his thumb and forefinger in 60 seconds, by doing the exercise several times. Adam is checking the DV to determine whether there has been a change as a result of the IV.

Adam has regulated various factors to guarantee that the outcomes are trustworthy. For each experiment, he is, for instance, using the same clothes pin, opening and closing it with the same fingers, and timing each trial for exactly 60 seconds. In order to prevent weariness from impairing his performance, Adam is also taking a one-minute break between each session.

The idea is that if Adam performs the exercise repeatedly over time, he will get more adept at it. This theory is predicated on the idea that repetition and practice can enhance a person's capacity to carry out a physical job.

Adam will compare how many times he opened and closed the clothes pin in each trial, starting with the first, to determine the outcomes. The increase in the number indicates that Adam becomes more adept at the practice. If the number falls or stays the same, the hypothesis is refuted, then it may be said that repetition had no positive effect on performance.

Overall, this scenario for an experimental design provides a straightforward yet efficient approach to evaluate the claim that doing a physical activity repeatedly will increase performance. It highlights the significance of limiting variables and calculating the DV to get relevant results.

To know more about exercise, visit:

https://brainly.com/question/13128077

#SPJ1

Compound X will have the shortest retention time and clean acetone is the most appropriate solvent to dissolve the mixture of Compounds X, Y, and Z for GC-MS analysis.

The compound with the shortest retention time will be Compound X, which has the lowest boiling point of 50 °C. In gas chromatography, retention time refers to the amount of time it takes for a compound to pass through the column and reach the detector. Compounds with higher boiling points tend to have longer retention times because they spend more time in the stationary phase, which slows their movement through the column.

The most appropriate solvent to dissolve the mixture of Compounds X, Y, and Z would be clean acetone. When choosing a solvent for GC-MS analysis, it is important to consider its volatility, purity, and compatibility with both the sample and the instrument. Acetone is a highly volatile solvent that evaporates quickly and completely, which is ideal for GC-MS analysis. It is also a polar solvent that can dissolve a wide range of organic compounds, making it a good choice for dissolving a mixture of compounds with different polarities.

To know more about solvent, here

brainly.com/question/30452436

#SPJ4

--The complete question is, 1.) If Compound X has a boiling point of 50 °C, Compound Y has a boiling point of 110 °C, and Compound Z has a boiling point of 89 °C, which of the compounds will have the shortest retention time? Justify and explain the reason for your choice. 2.) Which is the most appropriate solvent to dissolve the mixture of Compounds X, Y and Z from the previous question, assuming you want to utilize a solvent delay with the GC- MS: clean acetone, diethyl ether, or toluene? Justify the reason for your choice.--

The one acetyl CoA molecule is used directly in the fatty acid synthesis. The carbon atoms in the fatty acid that were donated by the acetyl CoA is the Carbon 17 and the carbon 18.

The Carbon 17 and the carbon 18 that were donated by the acetyl CoA. The  extra mitochondrial synthesis of the fatty acid in the two carbon fragments. The Acetyl-CoA carboxylase are the enzyme in the regulation of the fatty acid synthesis this is because it will provides the necessary building blocks as for the elongation of the fatty acid in the carbon chain.

The Fatty acids are the building blocks and the fat in the bodies and present in the food that we eat.

To learn more about fatty acid here

https://brainly.com/question/31376345

#SPJ4

The solubility product (Ksp) of a substance is a measure of the maximum solubility of that substance in a given solution. It is calculated as the product of the molar concentrations of the ions present in the solution.

In the case of lead(II) iodide, the Ksp can be calculated as the product of the molar concentrations of Pb2+ and I− ions present in the solution.

At the given temperature, the solubility of lead(II) iodide is 0.064 /100 ml. Therefore, the molar concentrations of Pb2+ and I− ions in the solution would be 0.064/100 ml divided by the molar mass of lead(II) iodide (364/mol). This gives a Ksp of 4.07 x 10-9, which can be rounded to 4.1 x 10-9. This is the solubility product of lead(II) iodide at the given temperature.

In summary, the solubility product of lead(II) iodide at a certain temperature is 4.1 x 10-9 when rounded to two significant figures.

Know more about Molar concentrations here

https://brainly.com/question/15532279#

#SPJ11

To make solid barium sulfide, you would need to react barium metal with elemental sulfur. The balanced chemical equation for this reaction is:

Ba(s) + S(s) → BaS(s)

To carry out this reaction, you would need to add excess sulfur to the barium metal. This ensures that all the barium is consumed in the reaction, and no excess barium remains. The excess sulfur can be removed by washing the product with a suitable solvent.

It is important to note that the reaction between barium and sulfur can be exothermic, releasing heat and potentially causing a fire or explosion. Therefore, appropriate safety precautions, such as wearing gloves and eye protection and working in a well-ventilated area, should be taken when carrying out this reaction.

Learn more about barium sulfide,

https://brainly.com/question/18402799

#SPJ4

To make a solid barium sulfide (BaS) you would need to add sulfur (S) to barium (Ba) in a stoichiometric ratio of 1:1. This means that for every one mole of barium, you would need one mole of sulfur.

The reaction can be represented by the following chemical equation:

Ba + S → BaS

To carry out this reaction, you could start with a sample of metallic barium and add elemental sulfur powder to it, in a ratio of 1:1 by mole. The reaction between the two elements will produce solid barium sulfide.

It is important to note that this reaction can be highly exothermic, so appropriate safety precautions should be taken. Additionally, barium sulfide is a toxic and reactive compound, and should be handled with care.

For more question on barium sulfide click on

https://brainly.com/question/31013085

#SPJ11

An allosteric enzyme can exist in two states, "tense" and "relaxed".

An allosteric enzyme is a type of enzyme that has multiple binding sites, including an active site where a substrate molecule binds and a regulatory site where a regulatory molecule (also called an effector) can bind. When a regulatory molecule binds to the regulatory site, it can cause a conformational change in the enzyme, which can affect the enzyme's activity.

Allosteric enzymes can exist in two main conformations or states: tense (T) and relaxed

Visit to know more about Enzyme:-

brainly.com/question/14577353

#SPJ11

Carl has concluded that substance have ionic bonds.

The usual guideline is that a bond is considered nonpolar if the difference in electronegativities is less than or equal to 0.4, while there are no hard and fast rules, and polar if the difference is greater.

The bond between two hydrogen atoms is an illustration of a nonpolar covalent bond since they equally share electrons. The bond between two chlorine atoms is another illustration of a nonpolar covalent bond since they also equally share electrons.

To know more about ionic bonds visit:-

https://brainly.com/question/11527546

#SPJ1

Question:

During che distry class, Cort performed several lab tests on two white solids. The results of three tests are seen in the data table. Based on this data, Carl has concluded that substance have ________ bonds.

A) covalent

B) diatomic

C) ionic

D) metallic

Of the four basic elements necessary for life as we know it, three are made In supernovae explosions. Option c is correct.

The four basic elements necessary for life as we know it are carbon, nitrogen, oxygen, and hydrogen. While these elements can be found throughout the universe, the origin of these elements can be traced back to the nuclear reactions that occur inside stars.

Carbon, nitrogen, and oxygen are synthesized in the cores of stars through the process of stellar nucleosynthesis. However, heavier elements like carbon, nitrogen, and oxygen cannot be synthesized in stars, but instead are formed during supernovae explosions.

These explosions release a huge amount of energy, and during the explosion, the temperatures and pressures are high enough to fuse lighter elements together into heavier elements, including the elements necessary for life. Therefore, it can be concluded that three of the four basic elements necessary for life as we know it are made in supernovae explosions. Hence Option c is correct.

To learn more about basic elements, here

https://brainly.com/question/28948712

#SPJ4

The complete question is:

Of the four basic elements necessary for life as we know it, three are made

Answer:The pH of a buffer prepared by adding 1.00 L of 1.0 M HCl to 750 ml of 1.5 M NaHCOO is 2.84

What is pH?

pH is a measure of the acidity of a solution.

pH is calculated from the negative logarithm to base ten of the hydrogen ions concentration of the solution.

For weak acids such as those used in the preparation of buffers, the acid dissociation constant, Ka are used to determine the pH of the solution.

Therefore, from the Ka of acetic acid, the pH of a buffer prepared by adding 1.00 L of 1.0 M HCl to 750 ml of 1.5 M NaHCOO is 2.84

The balanced chemical equation for the reaction between aluminum and silver nitrate is:

2 Al + 3 AgNO3 → 3 Ag + 2 Al(NO3)3

From the equation, we can see that 3 moles of aluminum nitrate (Al(NO3)3) are produced for every 3 moles of silver nitrate (AgNO3) consumed.

Therefore, if 0.75 moles of silver nitrate react, we can calculate the number of moles of aluminum nitrate produced as follows:

0.75 mol AgNO3 x (2 mol Al(NO3)3 / 3 mol AgNO3) = 0.50 mol Al(NO3)3

So, 0.50 moles of aluminum nitrate (Al(NO3)3) are obtained from the reaction of 0.75 mol of silver nitrate with a sufficient amount of aluminum.

Learn more about balanced chemical equation here:

https://brainly.com/question/28294176

#SPJ11

The unit of rate constant for this reaction is 1 / (s M⁴).

The rate of the reaction can be expressed as:

rate = k[A]²[B]³

where k is the rate constant and x and y are the orders of reaction with respect to A and B, respectively.

We can use the given information to determine the values of x and y.

When [A] is doubled, the rate increases by a factor of 4. This means:

(rate when [A] is doubled) / (rate when [A] is not doubled) = 4

[(k[2A]^x[B]^y) / (k[A]^x[B]^y)] = 4

2^x = 4

x = 2

Similarly, when [B] is tripled, the rate increases by a factor of 27. This means:

(rate when [B] is tripled) / (rate when [B] is not tripled) = 27

[(k[A]^2[3B]^y) / (k[A]^2[B]^y)] = 27

3^y = 27

y = 3

Substituting the values of x and y in the rate equation,

rate = k[A]²[B]³

The unit of rate constant can be determined as follows:

unit of rate = M/s

unit of [A] = M

unit of [B] = M

unit of rate constant = unit of rate / (unit of [A]² unit of [B]³)

Substituting the units.

unit of rate constant = (M/s) / (M² M³) = 1 / (s M⁴)

To know more about reaction, here

brainly.com/question/17101840

#SPJ4

The most important interaction is between the ions and the water molecules. There are also electrostatic interactions between the ions and the water molecules in aqueous salt solution.

In an aqueous salt solution, there are several interactions at work to promote hydration of ions. The most important interaction is between the ions and the water molecules. When the salt is dissolved in water, the water molecules surround the ions, forming hydration shells. These shells help to stabilize the ions and prevent them from coming into contact with each other.

The strength of the hydration interaction between an ion and a water molecule depends on the charge and size of the ion. Small ions with high charges, such as Na+ and Mg2+, have a strong interaction with water molecules because they can form more intimate contacts with water molecules. On the other hand, large ions with low charges, such as Cl- and SO42-, have weaker hydration interactions because they cannot form as many intimate contacts with water molecules.

In addition to the hydration interaction, there are also electrostatic interactions between the ions and the water molecules. These interactions occur because the ions have charges, which can interact with the partial charges on the water molecules. The strength of the electrostatic interaction depends on the charge of the ion and the distance between the ion and the water molecule.

Overall, the hydration of ions in an aqueous salt solution is a complex process that involves both hydration and electrostatic interactions. These interactions are crucial for stabilizing the ions in solution and preventing them from coming into contact with each other.

Learn more about aqueous salt solution here:

https://brainly.com/question/9947161

#SPJ11

The hydration of ions in an aqueous salt solution is promoted through ion-dipole interactions, hydrogen bonding, and electrostatic forces. These interactions help to stabilize the hydrated ions in the solution.

The hydration of ions in an aqueous salt solution involves several interactions to promote hydration. These interactions include:

1. Ion-dipole interactions: These are the attractive forces between the charged ions (cations and anions) of the dissolved salt and the polar water molecules. The positive end (hydrogen atoms) of water molecules surround the negative ions, while the negative end (oxygen atom) of water molecules surround the positive ions.

2. Hydrogen bonding: This is a specific type of dipole-dipole interaction that occurs between the hydrogen atom of a polar molecule (such as water) and an electronegative atom (like oxygen). In an aqueous salt solution, hydrogen bonding can occur between water molecules surrounding the ions.

3. Electrostatic forces: These forces occur between charged particles and help to stabilize the hydration shell around the dissolved ions.

To know more about Intermolecular Forces:

https://brainly.com/question/30897286

#SPJ11

There are several qualitative tests that can be used to detect the presence of iron in water. One commonly used method is the Phenanthroline test.

In this test, a small amount of Phenanthroline reagent is added to the water sample. If iron is present, a deep red color is observed. The reaction that takes place is the formation of a complex between iron ions and Phenanthroline.

The information was obtained from the "Standard Methods for the Examination of Water and Wastewater," which is a widely used reference book in the field of water quality analysis.

To detect iron in water, you can also use a qualitative test called the "Prussian Blue" or "potassium ferrocyanide" test.

Collect a water sample that you want to test for iron. Add a few drops of potassium ferrocyanide solution to the water sample. The chemical formula of potassium ferrocyanide is K4[Fe(CN)6]. Observe any color changes in the water sample. If iron is present in the water, you will observe a blue precipitate, known as Prussian Blue or ferric ferrocyanide, forming in the solution. The reaction can be represented as:

Fe3+ (aq) + K4[Fe(CN)6] (aq) → Fe4[Fe(CN)6]3 (s)

Fe3+ is the ferric ion (iron) from the water sample, and Fe4[Fe(CN)6]3 is the Prussian Blue precipitate.

This information can be found in various sources such as textbooks on qualitative analysis or online resources like chemistry websites and educational platforms. For example, you can refer to "Qualitative Chemical Analysis" by Daniel C. Harris or check resources like the American Chemical Society's website.

More on iron qualitative test: https://brainly.com/question/1620149

#SPJ11

The energy of the light emitted by 0.50 moles of photons with a wavelength of 671 nm is approximately 8.92 * 10^4 Joules.

Let's understand this in detail:

To find the energy of light emitted by 0.50 moles of photons with a wavelength of 671 nm, we can follow these steps:

1. Convert the wavelength to meters: 671 nm * (1 meter / 1,000,000,000 nm) = 6.71 * 10^-7 meters.

2. Calculate the energy of one photon using the Planck's equation: E = hf, where E is energy, h is Planck's constant (6.626 * 10^-34 Js), and f is frequency.

3. To find the frequency, we use the speed of light (c) equation: c = λf, where λ is the wavelength. Rearrange the equation to find the frequency: f = c / λ.

4. Substitute the values and calculate the frequency: f = (3 * 10^8 m/s) / (6.71 * 10^-7 m) = 4.47 * 10^14 Hz.

5. Now, calculate the energy of one photon: E = (6.626 * 10^-34 Js) * (4.47 * 10^14 Hz) = 2.96 * 10^-19 J.

6. Finally, find the energy of 0.50 moles of photons: Energy = (0.50 moles) * (6.022 * 10^23 photons/mole) * (2.96 * 10^-19 J/photon) = 8.92 * 10^4 J.

So, the energy of the light emitted by 0.50 moles of photons with a wavelength of 671 nm is approximately 8.92 * 10^4 Joules.

Learn more about photons: Which of the following could be the energy of a photon in the visible range? https://brainly.com/question/15946945

#SPJ11

The energy of the light emitted by 0.50 moles of photons with a wavelength of 671 nm is approximately 8.93 x [tex]10^4[/tex] J.

To find the energy of the light emitted by 0.50 moles of photons with a wavelength of 671 nm, we can use the following steps:
1. Convert the wavelength to meters: 671 nm = 671 x [tex]10^{(-9)}[/tex] m
2. Calculate the energy of a single photon using Planck's equation: E = h * c / λ, where E is the energy, h is the Planck's constant (6.626 x [tex]10^{(-34)}[/tex] Js), c is the speed of light (3.0 x [tex]10^8[/tex] m/s), and λ is the wavelength in meters.
3. Calculate the total energy of 0.50 moles of photons by multiplying the energy of a single photon by Avogadro's number (6.022 x [tex]10^{(23)}[/tex] particles/mole) and the number of moles (0.50).
Step-by-step calculation:
1. λ = 671 nm = 671 x [tex]10^{(-9)}[/tex] m
2. E (single photon) = (6.626 x [tex]10^{(-34)}[/tex] Js) * (3.0 x [tex]10^8[/tex] m/s) / (671 x [tex]10^{(-9)}[/tex] m) = 2.967 x [tex]10^{(-19)}[/tex] J
3. Total energy = E (single photon) * 0.50 moles * (6.022 x [tex]10^{(23)}[/tex] particles/mole) = (2.967 x [tex]10^{(-19)}[/tex] J) * 0.50 * (6.022 x [tex]10^{(23)}[/tex]) = 8.93 x [tex]10^4[/tex] J
So, the energy of the light emitted by 0.50 moles of photons with a wavelength of 671 nm is approximately 8.93 x 10^4[tex]10^4[/tex] J.

To learn more about moles, refer:-

https://brainly.com/question/26416088

#SPJ11

The mass of solid AgCl produced when 525 mL of 0.35 M AlCl3 is used with excess Ag2SO4 solution is 78.97 g.

The balanced chemical equation for the reaction between AlCl3 and Ag2SO4 is:

2 AlCl3 + 3 Ag2SO4 → Al2(SO4)3 + 6 AgCl

From the equation, we can see that 2 moles of AlCl3 react with 3 moles of Ag2SO4 to produce 6 moles of AgCl. Therefore, the mole ratio of AlCl3 to AgCl is 2:6 or 1:3.

To calculate the moles of AgCl produced, we need to first calculate the moles of AlCl3 used.

Moles of AlCl3 = concentration x volume / 1000

Moles of AlCl3 = 0.35 mol/L x 0.525 L

Moles of AlCl3 = 0.18375 mol

Since the mole ratio of AlCl3 to AgCl is 1:3, the moles of AgCl produced is:

Moles of AgCl = 3 x Moles of AlCl3

Moles of AgCl = 3 x 0.18375 mol

Moles of AgCl = 0.55125 mol

The molar mass of AgCl is 143.32 g/mol. Therefore, the mass of AgCl produced is:

Mass of AgCl = moles of AgCl x molar mass of AgCl

Mass of AgCl = 0.55125 mol x 143.32 g/mol

Mass of AgCl = 78.97 g

Therefore, the mass of solid AgCl produced when 525 mL of 0.35 M AlCl3 is used with excess Ag2SO4 solution is 78.97 g.

Learn more about the mass

https://brainly.com/question/19694949

#SPJ4

So we need to measure out 175 ml of the 10.0 m H2SO4 solution and dilute it with enough water to make a total volume of 500.0 ml.

To make a 500.0 ml solution of 3.5 m H2SO4, we need to calculate the amount of H2SO4 needed and then dilute it to the desired concentration.
First, we can use the formula for molarity:
Molarity = moles of solute / liters of solution
To find the moles of H2SO4 needed, we can rearrange this formula to:
moles of solute = Molarity x liters of solution
We want to end up with a 3.5 m solution of H2SO4, so:
moles of H2SO4 = 3.5 mol/L x 0.5 L = 1.75 moles
Next, we need to figure out how much of the 10.0 m H2SO4 solution we need to use to get 1.75 moles of H2SO4.
We can use the formula:
moles of solute = concentration x volume (in liters)
Rearranging for volume:
volume = moles of solute / concentration
Plugging in our values:
volume = 1.75 moles / 10.0 mol/L = 0.175 L = 175 ml

Learn more about H2SO4 here:

https://brainly.com/question/12004196

#SPJ11

The concentration of the H₂SO₄ solution is approximately 0.0541 M.

To calculate the concentration of the H₂SO₄ solution, you can use the concept of equivalence in the neutralization reaction:

H₂SO₄ (aq) + 2 NaOH (aq) → Na₂SO₄ (aq) + 2 H₂O (l)

Using the given information, we can start by finding the moles of NaOH:

moles of NaOH = volume (L) × concentration (M) = 0.02044 L × 0.1323 M = 0.00270492 moles

Since the stoichiometry of the reaction is 1:2 (H₂SO₄:NaOH), the moles of H₂SO₄ can be calculated as follows:

moles of H₂SO₄ = 0.00270492 moles NaOH × (1 mole H₂SO₄ / 2 moles NaOH) = 0.00135246 moles

Finally, we can find the concentration of the H₂SO₄ solution:

concentration of H₂SO₄ (M) = moles of H₂SO₄ / volume (L) = 0.00135246 moles / 0.02500 L = 0.0540984 M

Therefore, the concentration of the H₂SO₄ solution is approximately 0.0541 M.

Visit here to learn more about stoichiometry  : https://brainly.com/question/30215297
#SPJ11

To calculate the relative humidity, you can use the following formula: Relative Humidity = (Current amount of water vapor / Maximum water vapor capacity) x 100 Relative Humidity = (25 grams / 100 grams) x 100 = 25% So, the relative humidity is 25%.

The relative humidity can be calculated by dividing the actual amount of water vapor in the air (25 grams) by the maximum amount the air can hold at that temperature (100 grams) and then multiplying by 100 to get a percentage.

So,

Relative Humidity = (actual amount of water vapor / maximum amount air can hold) x 100

Relative Humidity = (25 / 100) x 100

Relative Humidity = 25%

Therefore, the relative humidity in the air is 25%.

Learn more about humidity here: brainly.com/question/22069910

#SPJ11

The resulting chromatogram would show a shift in the retention times of the analytes. The peak corresponding to the contaminant may also appear smaller or absent altogether in the new chromatogram. The overall shape and resolution of the chromatogram may be slightly altered due to changes in the mobile phase composition.

The chromatography is the technique of separation of the components from a mixture. The chromatograph is referred to a visible record of the result of the chromatography.The mobile phase is referred to the gas or the liquid which flows with a different rate on the stationary phase.  The mobile phase carries the components of the mixture. It is important for the separation of the components present in the mixture.When increasing the polarity of the mobile phase to remove a contaminant peak, the resulting chromatogram would show a shift in the retention times of the analytes. The contaminant peak would ideally be eluted earlier in the chromatogram, allowing for better separation from the target analytes. The peak corresponding to the contaminant may also appear smaller or absent altogether in the new chromatogram. The overall shape and resolution of the chromatogram may be slightly altered due to changes in the mobile phase composition.

Learn more about mobile phase here:

https://brainly.com/question/30616326

#SPJ11

The volume of the container is 16.9 L.To find the volume of the container, we can use the ideal gas law: PV = nRT

where P is the pressure in atmospheres (convert 812 mmHg to atm), V is the volume in liters (what we're solving for), n is the number of moles of gas (we're given 13.8 g of neon, which we can convert to moles using the atomic weight), R is the gas constant (0.0821 L·atm/mol·K), and T is the temperature in Kelvin (convert 34°C to K).

First, let's convert the pressure:

812 mmHg = 1.068 atm

Next, let's convert the temperature:

34°C = 307 K

Now, let's convert the mass of neon to moles:

13.8 g / 20.18 g/mol = 0.683 mol

Now we can plug in all the values and solve for V:

V = (nRT) / P
V = (0.683 mol x 0.0821 L·atm/mol·K x 307 K) / 1.068 atm
V = 16.9 L

Learn more about molar mass here: brainly.com/question/22997914

#SPJ11

The percent by volume of ethanol in a solution with 17 ml ethanol in 48 ml of solution is 35.4%.

Weight/volume percentage, volume/volume percentage, or weight/weight percentage are all possible percent answers. In each instance, the volume or weight of the solute divided by the total volume or weight of the solution yields the concentration in percentage.

It is also relevant to the numerator in weight units and the denominator in volume units and is known as weight/volume percent. This is true not only for a solution where concentration must be represented in volume percent (v/v%) when the solute is a liquid.

Volume of ethanol = 17 mL.

Volume of the solution = 48mL

Percent by volume of ethanol = [tex]\frac{Volume \ of \ ethanol }{Volume \ of \ Water + Volume \ of \ ethanol}[/tex]

= 17 / 48 x 100

= 0.354

= 35.4 %.

Therefore, the percent volume of ethanol in this solution is 35.4%.

Learn more about Percent by volume:

https://brainly.com/question/19379932

#SPJ4

The most important use of an element's atomic number is that it determines the identity of an element. From a neutral atom's atomic number, we can also determine the number of electrons in that atom.

The most important use of an element's atomic number is that it determines the element's unique identity and its position on the periodic table. The atomic number is equal to the number of protons in the nucleus of an atom, which also determines the number of electrons in a neutral atom.

From a neutral atom's atomic number, we can also determine the element's symbol, its electron configuration, and its properties such as its atomic mass and the number of isotopes it has. Additionally, the atomic number can provide information about the element's reactivity and its ability to bond with other elements to form compounds. Overall, the atomic number is a fundamental characteristic of an element that is used in many different areas of chemistry and physics.

Learn more about a neutral atom's atomic number at https://brainly.com/question/7027481

#SPJ11

The most important use of an element's atomic number is that it determines the element's unique identity and properties.

The atomic number also tells us the number of protons in the nucleus of an atom, which in turn determines the number of electrons in the neutral atom. Additionally, the atomic number can give us information about the element's electron configuration and its position on the periodic table. Overall, the atomic number is a crucial piece of information for understanding an element's properties and behavior.
Hi! The most important use of an element's atomic number is to identify the specific element and its position in the periodic table. The atomic number represents the number of protons in the nucleus of an atom of that element.

From a neutral atom's atomic number, we can also determine the number of electrons, as a neutral atom has an equal number of protons and electrons. This information helps us understand the element's chemical properties and reactivity, as the arrangement of electrons in the atom's electron shells influences its behavior in chemical reactions.

Learn more about atomic number here:

https://brainly.com/question/16858932

#SPJ11

The federal government was unable to intervene in elixir sulfanilamide containing diethylene glycol that causes kidney poisoning as there was no legal requirement that medicine be safe.

In 1937, a sulfonamide antibiotic called elixir sulfanilamide, which was incorrectly made, poisoned large numbers of people in the United States. Over a hundred individuals are said to have died as a result. The 1938 Federal Food, Drug, and Cosmetic Act was passed in response to the uproar produced by this episode and subsequent tragedies of a similar nature, greatly expanding the authority of the Food and Drug Administration to regulate pharmaceuticals.

A warning that Elixir Sulfanilamide was poisonous and lethal was promptly published in newspapers and broadcast on radio once the AMA laboratory identified diethylene glycol as the dangerous component. On the 14th, a doctor in New York was informed of the fatalities and immediately contacted Food and Drug Administration headquarters.

Learn more about Elixir sulfanilamide:

https://brainly.com/question/30902703

#SPJ4

The partial pressure of carbon dioxide in the flask is 7.10 atm and the total pressure in the flask is 11.25 atm.

The ideal gas law is a fundamental law of physics that describes the behavior of ideal gases under various conditions. It is expressed mathematically as PV = nRT, where P is the pressure of the gas, V is its volume, n is the number of moles of gas, R is the ideal gas constant, and T is the absolute temperature of the gas in Kelvin.

To find the partial pressure of carbon dioxide and total pressure in the flask, we need to use the ideal gas law:

PV = nRT

First, we need to calculate the number of moles of each gas:

nO₂ = mO₂ / MM(O₂) = 3.64 g / 32.00 g/mol = 0.1135 mol

nCO₂ = mCO₂/ MM(CO₂) = 8.53 g / 44.01 g/mol = 0.1937 mol

where m is the mass of the gas, and MM is the molar mass of the gas.

Next, we can calculate the total number of moles of gas in the flask:

ntotal = nO₂ + nCO₂ = 0.1135 mol + 0.1937 mol = 0.3072 mol

The total pressure in the flask can be calculated using the ideal gas law:

Ptotal = ntotalRT / V

where R = 0.08206 L·atm/K·mol is the gas constant.

The temperature needs to be converted to Kelvin:

T = 38°C + 273.15 = 311.15 K

Substituting the values, we get:

Ptotal = (0.3072 mol)(0.08206 L·atm/K·mol)(311.15 K) / 8.39 L

= 11.25 atm

Therefore, the total pressure in the flask is 11.25 atm.

To find the partial pressure of carbon dioxide, we need to use the mole fraction of carbon dioxide:

XCO₂ = nCO₂ / ntotal

Substituting the values, we get:

XCO₂ = 0.1937 mol / 0.3072 mol = 0.6309

The partial pressure of carbon dioxide can be calculated using Dalton's law of partial pressures:

PCO₂  = XCO₂ Ptotal

Substituting the values, we get:

PCO₂  = 0.6309 × 11.25 atm

= 7.10 atm

Therefore, the partial pressure of carbon dioxide in the flask is 7.10 atm.

Learn more about pressure here:

https://brainly.com/question/12971272

#SPJ1

(a) Balanced net ionic equation: Cr³⁺(aq) + 3CO₃²⁻(aq) → Cr₂(CO₃)₃(s); spectator ions: 2NH₄⁺(aq) and 3SO₄²⁻(aq).

(b) Balanced net ionic equation: Ag+(aq) + SO₄²⁻(aq) → Ag₂SO₄(s); spectator ions: K⁺(aq) and NO₃⁻(aq).

(c) Balanced net ionic equation: Pb²⁺(aq) + 2OH⁻(aq) → Pb(OH)₂(s); spectator ions: 2K⁺(aq) and 2NO₃⁻(aq).

(a) To write the balanced net ionic equation for the reaction between Cr₂(SO₄)₃ and (NH₄)₂CO₃, we first need to write the complete ionic equation:

Then, we eliminate the spectator ions (NH₄⁺ and SO₄²⁻) to get the net ionic equation:

(b) For the reaction between AgNO₃ and K₂SO₄, the complete ionic equation is:

Eliminating the spectator ions (K⁺ and NO₃⁻) gives the net ionic equation:

(c) Finally, for the reaction between Pb(NO₃)₂ and KOH, the complete ionic equation is:

Eliminating the spectator ions (K⁺ and NO₃⁻) gives the net ionic equation:

To learn more about Balanced net ionic equations, here

https://brainly.com/question/15467502

#SPJ4