in bump theory, what does the additional striking energy cause the electron to do?

Answers

Answer 1

In bump theory, the additional striking energy causes the electron to jump to a higher energy level. The exact behavior of the electron depends on a number of factors, including the properties of the material it is in and the specific nature of the incoming energy.

In the bump theory, when an electron receives additional striking energy, it causes the electron to move to a higher energy level, also known as an excited state.

The striking energy provides the electron with the extra energy required to overcome the attractive force between the electron and the nucleus, allowing it to occupy a higher energy level farther from the nucleus. Once the electron is in this excited state, it may eventually release the absorbed energy and return to its original energy level, known as the ground state. This is because when an electron is hit by a photon or particle with more energy than it currently possesses, it absorbs that energy and moves up to a higher energy level. This process is known as excitation. Once the electron is in this higher energy level, it can either emit energy and return to its original energy level, or it can continue to absorb energy and move even higher up the energy ladder.

Learn more about excitation here:

brainly.com/question/3103316

#SPJ11

Answer 2

In bump theory, the additional striking energy causes the electron to jump to a higher energy level or orbit. This is known as an excited state. The electron will eventually return to its original state, releasing the excess energy in the form of light or heat.


In bump theory, the additional striking energy causes the electron to:

1. Absorb the energy: When a particle with sufficient energy collides with an electron, the electron absorbs the additional striking energy.

2. Transition to a higher energy level: As a result of absorbing the energy, the electron becomes excited and moves from its initial energy level to a higher energy level. This is known as an "excited state."

3. Emit energy when returning to its original energy level: Eventually, the excited electron will return to its original energy level. When this occurs, it releases the excess energy it had absorbed earlier, typically in the form of light or other forms of electromagnetic radiation.

i.e, In bump theory, the additional striking energy in bump theory causes the electron to absorb the energy, transition to a higher energy level, and eventually emit energy when returning to its original energy level.

Learn more about energy for an electron: https://brainly.com/question/23729506

#SPJ11


Related Questions

as a safety precaution, electric duct heaters should be wired so that they will not operate unless:

Answers

As a safety precaution, electric duct heaters should be wired so that they will not operate unless the proper interlocking mechanisms, such as airflow sensors and thermostat controls, are in place and functioning correctly. This ensures safe and efficient operation of the heaters while preventing potential hazards.

As a safety precaution, electric duct heaters should be wired so that they will not operate unless the airflow through the duct is present. This is achieved by connecting a current sensing switch to the fan motor circuit, which will cut off power to the duct heater if the fan motor fails or the airflow stops. This ensures that the heater will not overheat and cause a fire hazard.
As a safety precaution, electric duct heaters should be wired so that they will not operate unless the proper interlocking mechanisms, such as airflow sensors and thermostat controls, are in place and functioning correctly. This ensures safe and efficient operation of the heaters while preventing potential hazards.

To learn more about safety precaution, click here:

brainly.com/question/29793038

#SPJ11

As a safety precaution, electric duct heaters should be wired so that they will not operate unless the "proper airflow is detected within the duct system".

Duct heaters are a crucial component of HVAC systems as they warm up the air before distributing it to different rooms in a property. Electrical duct heaters are the most widely used type, generating heat by passing an electric current through coils, which offer resistance. As air passes through the ducts, it absorbs the heat from the coils and is then directed into the rooms. Inline electric duct heaters can be utilized for a variety of heating applications, including primary, supplementary, and space heating.

This is done to prevent overheating and potential fire hazards.

Learn more about electric duct heaters:https://brainly.com/question/31580239

#SPJ11

by purchasing software that gathers data and predicts trends in the most popular genres without any extra programming, the library can purchase the books that people will read

Answers

By utilizing software that collects data and forecasts trends in popular genres, the library can make informed decisions on which books to purchase. This ensures that the library's collection stays up-to-date and aligns with the reading interests of the community, ultimately leading to increased patron satisfaction and engagement.

By purchasing software that gathers data and predicts trends in the most popular genres, the library can make informed purchasing decisions on the books that people are likely to read. This eliminates the need for extra programming and ensures that the library's collection stays relevant and in-demand. The software can analyze data such as user preferences, browsing history, and book ratings to generate accurate predictions on which books will be popular in the future. This ultimately saves the library time and money by avoiding the purchase of books that may not be well-received by their audience. Overall, investing in such software can greatly benefit the library's collection development strategy and help them better serve their community's reading needs.
By utilizing software that collects data and forecasts trends in popular genres, the library can make informed decisions on which books to purchase. This ensures that the library's collection stays up-to-date and aligns with the reading interests of the community, ultimately leading to increased patron satisfaction and engagement.

To learn more about software, click here:

brainly.com/question/985406

#SPJ11

By purchasing software that gathers data and predicts trends in the most popular genres, the library can make informed decisions when acquiring new books.

This approach ensures that the library's collection remains up-to-date and relevant to the interests of its patrons, ultimately increasing the likelihood that people will read the selected books. Furthermore, this software eliminates the need for extra programming, saving time and resources.Such data-driven decisions also allow the library to maximize its budget, as it can focus on purchasing titles that are more likely to be borrowed and enjoyed by the community. Additionally, understanding trends in popular genres can assist the library in creating targeted promotions and events, further engaging patrons and fostering a love for reading.In summary, utilizing software that gathers data and predicts trends in popular genres is an efficient and cost-effective way for a library to maintain a relevant and engaging collection. This approach benefits both the library and its patrons by ensuring a diverse and appealing selection of books that cater to the community's interests.

For such more question on fostering

https://brainly.com/question/31458527

#SPJ11

why can the compliance and stiffness tensors for cubic and orthotropic materials be greatly simplified from the general case?

Answers

The compliance and stiffness tensors for cubic and orthotropic materials can be greatly simplified from the general case because these materials have specific symmetry properties that allow for certain components of the tensors to be equal to each other or even zero

For example, in cubic materials, all three axes have equal stiffness and compliance, so only one value needs to be specified for each. In orthotropic materials, there are three mutually perpendicular planes of symmetry, which greatly reduces the number of independent components in the tensors. This simplification makes it easier to model and analyze the mechanical behavior of these materials. The compliance and stiffness tensors for cubic and orthotropic materials can be greatly simplified from the general case because these materials exhibit symmetry in their properties. In both cubic and orthotropic materials, the mechanical properties are directionally dependent, but they follow specific patterns.For cubic materials, the properties are isotropic within the three mutually perpendicular planes, while in orthotropic materials, the properties are isotropic within each of the three orthogonal planes. This symmetry allows for a reduced number of independent constants, simplifying the tensors and making them easier to work with in engineering applications.

To learn more about stiffness  click on the link below:

brainly.com/question/13095331

#SPJ11

The compliance and stiffness tensors for cubic and orthotropic materials can be greatly simplified from the general case due to the specific symmetries present in these materials.

Cubic and orthotropic materials have symmetry in their elastic properties, which allows for a reduction in the number of independent elastic constants. In the general case, anisotropic materials have 21 independent constants in their stiffness tensor. However, cubic materials have only 3 independent constants, while orthotropic materials have 9 independent constants.

This simplification arises because the symmetry of cubic and orthotropic materials leads to specific relationships between the elastic constants. These relationships reduce the complexity of the compliance and stiffness tensors, allowing for easier analysis and calculation of material properties.

In summary, the compliance and stiffness tensors for cubic and orthotropic materials can be greatly simplified from the general case due to the symmetry in their elastic properties, which reduces the number of independent elastic constants.

Learn more about stiffness tensors: https://brainly.com/question/14800060

#SPJ11

for overdamped or critically damped systems, the rise time is the time it takes the transient response to go from a of the step change voltage to b of the step change voltage. group of answer choices a - 20%, b - 80% a - 50%, b - 50% a - 10%, b - 90% a - 0%, b - 100%

Answers

For overdamped or critically damped systems, the rise time is the time it takes the transient response to go from a of the step change voltage to b of the step change voltage. The correct answer is a - 10%, b - 90%. This means that the rise time is the time it takes for the transient response to go from 10% to 90% of the step change voltage.

It is important to note that the rise time is dependent on the damping ratio of the system, which affects the speed at which the transient response reaches its steady state value.For overdamped or critically damped systems, the rise time is the time it takes for the transient response to go from a of the step change voltage to b of the step change voltage, where a and b are specific percentages of the final steady-state value.The correct answer is a - 10%, b - 90%.In an overdamped or critically damped system, the response of the system to a step change in voltage is slower than in an underdamped system, and there is no oscillation in the response. The rise time is defined as the time it takes for the output to rise from 10% to 90% of its steady-state value.For example, if the steady-state value of the output is 100 volts, the rise time for an overdamped or critically damped system would be the time it takes for the output to rise from 10 volts to 90 volts (i.e., 10% to 90% of 100 volts).Overall, the rise time is an important characteristic of the transient response of a system, as it determines how quickly the system responds to changes in input and reaches its steady-state value.For overdamped or critically damped systems, the rise time is the time it takes the transient response to go from 10% (a) of the step change voltage to 90% (b) of the step change voltage. So, the correct answer is: a - 10%, b - 90%.

To learn more about critically damped click on the link below:

brainly.com/question/13161950

#SPJ11v

For overdamped or critically damped systems, the rise time is the time it takes the transient response to go from 0% of the step change voltage to 100% of the step change voltage.

For overdamped or critically damped systems, the rise time is the time it takes the transient response to go from a of the step change voltage to b of the step change voltage, where a is 0% and b is 100%.

Therefore, the answer would be a - 0%, b - 100%.

Learn more about voltage: https://brainly.com/question/31519346

#SPJ11

A construction worker hits a chunk of concrete with a sledgehammer. The sledgehammer delivers a force of 750 lbs and breaks the concrete

Answers

When the construction worker hits the chunk of concrete with the sledgehammer, the force of the sledgehammer is transferred to the concrete and since the force is 750 lbs, we can as well assume it is strong enough to break the concrete.

What is Force?

Force is a vector quantity that has both magnitude and direction. Force is a push or pull on an object that causes it to accelerate or deform.

Force is commonly denoted by the symbol "F" and its SI unit is the newton (N). One newton is defined as the force required to accelerate a mass of one kilogram at a rate of one meter per second squared (1 N = 1 kg x m/s²).

Examples of forces include the gravitational force between two masses, the tension in a rope, the normal force exerted by a surface, the force exerted by a spring, and the force exerted by a person pushing an object.

Learn more about force here:

https://brainly.com/question/25573309

#SPJ4

The Weld Center Vertices option is available for which of the
following Fill Hole Mode settings?

Answers

As a general overview, the term "Weld Center Vertices" typically refers to a feature or option that is used in 3D modeling or computer-aided design (CAD) software.

What is the feature used for?

This feature is usually used in conjunction with a "Fill Hole" mode, which is a tool that is used to fill in holes or gaps in 3D models.

When the "Weld Center Vertices" option is enabled in a "Fill Hole" mode, the software will attempt to connect the vertices or points around the hole by creating a new surface or face that is centered on the vertices. This can be useful for creating a more uniform and seamless 3D model, particularly when dealing with complex shapes or irregular surfaces.

Read more about 3D models here:

https://brainly.com/question/29306858

#SPJ1

a parallel rlc circuit contains a resistor r = 1 ω and an inductor l = 2 h. select the value of the capacitor so that the circuit is critically damped

Answers

To design a critically damped parallel RLC circuit with a resistor R = 1Ω and an inductor L = 2H, you need to select the value of the capacitor C according to the following formula: C = 1 / (4 * R * L) Plug in the values for R and L: C = 1 / (4 * 1 * 2) C = 1 / 8 So, you need to select a capacitor with a value of 1/8 F (0.125 F) for the circuit to be critically damped.

To calculate the value of the capacitor required to make the parallel RLC circuit critically damped, we need to use the formula for the damping ratio, which is given by: ζ = R / (2√(L/C)) where R is the resistance, L is the inductance, C is the capacitance, and ζ is the damping ratio. For critically damped behavior, ζ = 1, which means: 1 = R / (2√(L/C)) Substituting the given values of R = 1 Ω and L = 2 H, we get: 1 = 1 / (2√(2/C)) Squaring both sides and rearranging, we get: C = 8/9 F Therefore, the value of the capacitor required to make the parallel RLC circuit critically damped is 8/9 F.

Learn more about circuit here-

https://brainly.com/question/27206933

#SPJ11

To make a parallel RLC circuit critically damped, the value of the capacitor should be chosen so that the damping factor is equal to 1. In a parallel RLC circuit, the damping factor can be calculated using the formula:

damping factor = R / (2 * √(L * C))

Given that R = 1 Ω and L = 2 H, we can rearrange the formula to find the value of the capacitor (C):

C = (R^2) / (4 * L)

Plugging in the values, we get:

C = (1^2) / (4 * 2) = 1 / 8

Therefore, the value of the capacitor needed for the circuit to be critically damped is C = 1/8 F (farads).

Learn more about critically damped: https://brainly.com/question/31519346

#SPJ11

As Apple’s CEO, the late Steve Jobs orchestrated innovations that revolutionized all of these industries except which?Multiple Choicemusicsmartphonesdigital publishingcable televisiontablet computing

Answers

The industry that Steve Jobs did not revolutionize through his innovations as Apple's CEO was cable television.

As Apple's CEO, the late Steve Jobs orchestrated innovations that revolutionized all of these industries except cable television. The industries that he did revolutionize include music, smartphones, digital publishing, and tablet computing. He revolutionizes the music industry with the iPod and iTunes, smartphones with the iPhone, digital publishing with the iPad, and tablet computing with the iPad as well.

Learn more about Steve Jobs: https://brainly.com/question/31506774

#SPJ11

in what flight condition must an aircraft be placed in order to spin

Answers

In order for an aircraft to spin, it must be placed in a specific flight condition known as an aggravated stall. This occurs when the angle of attack of the aircraft is too high and the airflow over the wings becomes disrupted, causing a loss of lift.

As a result, one wing may stall before the other, creating an unequal lift distribution that can cause the aircraft to enter a spin. Pilots must be trained to recognize and recover from this dangerous situation in order to prevent accidents.
In order to spin, an aircraft must be placed in a specific flight condition known as a "stall." A stall occurs when the angle of attack is too high, causing a reduction in lift and an increase in drag. To initiate a spin, the aircraft must be in a stalled condition and have a yawing motion (rotation around the vertical axis). This combination of factors causes one wing to generate more lift than the other, resulting in the spinning motion.

Visit here to learn more about aircraft:

brainly.com/question/28246952

#SPJ11

In order for an aircraft to spin, it must be in a stall condition. A stall occurs when the angle of attack (AOA) is too high, causing the airflow over the wings to separate and the lift generated by the wings to decrease. When the AOA reaches the critical angle of attack, the airflow can no longer create enough lift to keep the aircraft in the air, and it begins to descend.

During a spin, one wing drops while the other rises, and the aircraft rotates around its vertical axis. This occurs when one wing continues to generate lift while the other does not, causing the aircraft to roll and yaw simultaneously.It is important to note that not all aircraft are designed to spin, and attempting to spin an aircraft that is not certified for it can be dangerous. Pilots must receive proper training and follow the aircraft manufacturer's guidelines to perform spins safely.Overall, an aircraft must be in a stall condition to spin. This occurs when the angle of attack is too high and the airflow over the wings separates, causing the aircraft to lose lift and enter a descending motion while rotating around its vertical axis.

For more such question on vertical axis

https://brainly.com/question/29774083

#SPJ11

This manipulator is used to establish a field width for the value that follows it: field_width set field setw iomanip None of these

Answers

The manipulator used to establish a field width for the value that follows it is setw from the iomanip library in C++. It allows you to specify the number of characters that should be used for the output of the value.

For example, if you want to output a value with a field width of 5, you would use set w(5). This will ensure that the value is formatted with 5 characters, adding spaces as necessary to achieve the desired width. So the correct option in this case would be "set field setw iomanip". The term "set field set w iomanip" does not make sense in this context.
The manipulator used to establish a field width for the value that follows it is "setw". This term is part of the iomanip library in C++. So, the correct answer is "setw". The other terms mentioned in the question, such as "field_width", "set field", and "setw ioman ip", are not relevant to the context of the question.

Visit here to learn more about iomanip library:

brainly.com/question/28343948

#SPJ11

The manipulator in question is called "setw" and it is a part of the "iomanip" library in C++. option c is correct.

This manipulator is used to set the field width for the value that follows it. The value can be a string, integer, or any other data type.

The purpose of setw is to make the output more readable and organized by aligning the data in columns. For example, if you are printing a table with multiple columns, you can use setw to set the width of each column so that the data is aligned and easy to read.

The syntax for using setw is as follows:

cout << setw(10) << "Hello";

In this example, setw(10) sets the field width to 10 characters for the string "Hello". This means that "Hello" will be printed with a width of 10 characters, even if it is shorter than that. If the string is longer than 10 characters, it will be truncated to fit within the allotted space.

Overall, setw is a useful manipulator for formatting output in C++. It helps to make the output more readable and organized, which is important when dealing with large amounts of data.

For such more question on setw

https://brainly.com/question/30436807

#SPJ11

Note: The complete question would de as bellow,

This manipulator is used to establish a field width for the value that follows it:

a)field_width

b)set field

c)setw

d)iomanip

e)None of these

The elementary inverse reaction A+B→C+D takes place in the liquid phase and at constant temperature as follows: Equal volumetric flows of two streams, the first containing 0.020 moles A/litre and the second containing 1.4moles B/litre, constitute the feed to a 30-litre volume of a full-mixing continuous-work reactor. The outlet of the reactor is the inlet to a subsequent piston flow reactor (in series reactors). In the outlet stream from the first reactor the concentration of product C was measured and found to be equal to 0,002 mol/l.
-What should be the volume of the piston flow reactor so that the array achieves a conversion efficiency of 35%?

Answers

To determine the required volume of the piston flow reactor for a conversion efficiency of 35%, we need to use the following equation:

How To determine the required volume of the piston flow reactor

X = (C0 - C)/C0 = 1 - exp(-kV)

where:

X = conversion efficiency

C0 = initial concentration of reactant A

C = concentration of reactant A at any given time

k = rate constant of the reaction

V = reactor volume

We can rearrange this equation to solve for V:

V = ln(1/(1-X)) / k

We are given that the feed to the reactor contains 0.020 moles of A per liter and 1.4 moles of B per liter. Since the reaction is elementary and the stoichiometry is 1:1 for A and B, we can assume that the concentration of B will remain constant throughout the reactor. Therefore, the initial concentration of A in the feed is 0.020 mol/L.

We are also given that the concentration of product C in the outlet stream from the first reactor is 0.002 mol/L. Since the stoichiometry is 1:1 for A and C, we can assume that the concentration of A at this point is also 0.002 mol/L.

To determine the rate constant k, we need to use the following equation:

k = (k_f * k_r) / (k_f + k_r)

where:

k_f = forward rate constant

k_r = reverse rate constant

Read more on piston flow reactor herehttps://brainly.com/question/30396700

#SPJ1

Assume:

A = 1101 0011 1111 0110

B = 0110 1101 1101 1110

Write the series of operations necessary to pack A into B (and store the result in C), where the 8 lowest order bits of B are stored in the 8 highest order bits of C, and the 8 highest order bits of A are stored in the 8 lowest order bits of C.

Answers

To pack A into B and store the result in C, the following operations can be performed.

What is the explanation for the above response?

Perform a logical shift right on A by 8 bits, which will result in 0000 0000 1101 0011.Perform a logical shift left on B by 8 bits, which will result in 1011 0110 1101 1110.Perform a logical OR operation between the results of step 1 and step 2, which will result in 1011 0110 1111 1110.Perform a logical shift left on A by 8 bits, which will result in 0000 0000 0000 0000.Perform a logical shift right on B by 8 bits, which will result in 0000 0000 0110 1101.Perform a logical OR operation between the results of step 4 and step 5, which will result in 0000 0000 0110 1101.Perform a logical OR operation between the results of step 3 and step 6, which will result in C = 1011 0110 1111 1110 0000 0000 0110 1101.

Learn more about operations at:

https://brainly.com/question/9697567

#SPJ1

the waveforms below represent the inputs to a s-r flip-flop. ignoring the present state value, during which time interval(s) will the q output of the flip-flop be high?

Answers

The q output of the flip-flop will be high during the time interval between 2 and 3.

The S-R flip-flop has two inputs, S (set) and R (reset), and two outputs, Q and Q'. When S is high and R is low, the Q output is set to high, and when S is low and R is high, the Q output is reset to low. In this case, the waveform for the S input is high between 2 and 3, while the waveform for the R input is low throughout the duration.

Therefore, during the time interval between 2 and 3, the S input is high and the R input is low, so the Q output will be set to high. During all other time intervals, either the S input is low or the R input is high, so the Q output will remain low.

For more questions like Flip-flop click the link below:

https://brainly.com/question/16778923

#SPJ11

You are troubleshooting an application problem and want to eliminate faulty memory as a source of the problem. Which command do you use?Mdsched.exe. Mds.chace. Mds.con

Answers

If you are troubleshooting an application problem and suspect that faulty memory may be the cause of the issue, you can use the "mdsched.exe" command to check for any memory problems.

"mdsched.exe" command runs the Windows Memory Diagnostic tool, which will test your computer's memory for any errors or issues. Once the test is complete, it will provide you with a report that you can use to determine whether faulty memory was indeed the source of the problem. It is important to eliminate faulty memory as a possible cause before moving on to other troubleshooting steps, as memory issues can often be the root cause of many application problems.

To troubleshoot an application problem and eliminate faulty memory as a source of the issue, you should use the command "mdsched.exe". This is done as follows:
1. Open the Run dialog box by pressing the Windows key + R.
2. Type "mdsched.exe" into the dialog box and hit Enter.
3. The Windows Memory Diagnostic tool will open, offering options to restart now and check for problems or check for problems the next time you start your computer.
4. Choose the appropriate option to run the memory diagnostic test.

This command, mdsched.exe, will run the Windows Memory Diagnostic tool, which is designed to detect and diagnose any issues with your computer's memory. By using this tool, you can confirm whether or not faulty memory is contributing to your application problem.

Learn more about  Windows Memory Diagnostic tool (WMD) here:

brainly.com/question/22895405

#SPJ11

Hi! To eliminate faulty memory as a source of an application problem, you should use the command "mdsched.exe".

This command launches the Windows Memory Diagnostic tool, which checks your computer's memory for any issues that might be causing the problem with your application.

Learn more about application problem: https://brainly.com/question/13818690

#SPJ11

Other Questions
Each receivable transaction involves two partiesthe one who takes on the obligation and the one who will collect the cash. True or False. WILL MARK BRAINLIEST IF RIGHTHOW DID ENSLAVED PEOPLE HELP TO MOVE HAITI TOWARDS INDEPENDENCE FROM FRANCE? Megan borrows money at an annual effective interest rate of 5%. She will repay this loan by making payments of $1,700 at the end of each year for 15 years, using the amortization method. Calculate the amount of interest paid in the 4th payment. Solve by hand without the use of a spreadsheet or finance calculator. PLEASE HELPDUE WEDNESDAY 3. Describe the process of a bill becoming a law. 4. What are the multiple ways to vote on a bill? aldehydes and ketones prefer to fragment by ___ which produces a resonance stabilized acylium ion when k-mart paid martha stewart (famous for her business related to lifestyle and the home) a fee in return for permission to introduce a line of towels and other housewares bearing stewart's name, it was an example of janet van dyne is in law enforcement and incurred the following transactions last year.sales price purchase price date purchased date soldcisco preferred stock 25,000 6,000 7/15/2012 1/12/2022dreyer's grand ice cream stock 14,000 10,000 7/1/2020 4/20/2022novell common stock 2,000 10,000 2/12/2017 11/29/2022 stock 4,000 3,000 8/2/2008 5/2/2022abc common 6,000 9,000 8/10/2022 8/20/2022abc common 8,000 12/30/2022prior-year st capital loss carryforward (5,500)prior year lt capital loss carryforward (5,000)what is the 2022 end of year overall capital position? be sure to include character and amount. show your work in order toreceive credit (5pts Help Please...You have 67 coins consisting of half-dollars and quarters. The number of quarters is 7 more than three times the number of half-dollars.How many quarters do you have?How many half -dollars do you have? _____ is the act of fraudulently using email to try to get the recipient to reveal personal data. Will mark brainliest if answer is correct define the following: what is the equilibrium price of the concerts. what is the equilibrium quantity of the concerts. what is the optimal price of the concerts. what is the optimal quantity of the concerts. is this a positive or a negative externality ? (single word answer-positive or negative) what is the value of the externality ? (number no dollar signs or decimals) what is the proper action to correct the externality: tax or subsidy (tax or subsidy) what is the value of the corrective tax or subsidy applied to correct the externality ? Mack the mountain man is an avid outdoorsman. Rearrange the following choices by Mack's gravitational potential energy from lowest to highest with the lowest amount on top. All of the activities occur on the same mountain. Enumerate and discuss the 7 characteristics of Language the regulatory event permitting actin and myosin to interact in smooth muscle is: A circle with center O and radius 5 has central angle XOY. X and Y are points on the circle. If the measure of arc XY is 90 degrees, what is the length of chord XY? the molar solubility of pbi 2 is 1.5 10 3 m. calculate the value of ksp for pbi 2 .4.5 x 10 -6 jack and christopher, both 16-years-old, are best friends. how are the boys likely to spend their time together? question 8 options: a) playing competitive games b) talking about girls and other kids at school c) avoiding large group activities d) sharing thoughts and feelings eBook Problem Walk Through Holt Enterprises recently paid a dividend, Do, of $3.50. It expects to have nonconstant growth of 12% for 2 years followed by a constant rate of 6% thereafter . The firm's required return is 10% a. How far away is the horizon date? 1. The terminal, or horizon, date is Year since the value of a common stock is the present value of all future expected dividends at time zero II. The terminal, or horizon, dat is the date when the growth rate becomes nonconstant. This occurs at time zero. 111. The terminal, or hottron, date is the date when the growth rate becomes constant. This occurs at the beginning of Year 2 IV. The terminal, or horizon, date is the date when the growth rate becomes constant. This occurs at the end of your V. The terminal, or horizon, dat is Infinity since common stocks do not have a maturity date Select . What is the firm's horton, of continuino, value? Do not round Intermediate calculations. Round your answer to the nearest $ What is the he's intrinske volion today. Part round intermediate calculations. Round your wwwer to that comest cent assume a company is considering adding a new product. the expected cost and revenue data for this product are as follows: annual sales 5,000 units unit selling price $ 60 unit variable costs: production $ 29.90 selling $ 6 incremental fixed costs per year: production $ 35,000 selling $ 45,000 if the company adds this new product, it expects the contribution margin of other product lines to drop by $18,500 per year. what is the lowest price the company could charge and still break-even on the new product? multiple choice $39.60 $51.90 $40.60 $55.60 Exercise 11-11 Capitalizing interest (LO 11-2)Kobe Company began constructing a building for its own use in February 20X1. During 20X1, Kobe incurred interest of $70,000 on specific construction debt and $15,000 on other borrowings. Interest computed on the weighted-average amount of accumulated expenditures for the building during 20X1 was $60,000.Required:1a. What amount of interest should Kobe capitalize?1b. Prepare the journal entry to record payment of the interest.2. If interest computed on the weighted-average amount of accumulated expenditures for the building during 20X1 was instead $90,000, what amount of interest should Kobe capitalize?