Note that the missing word in the above sentence which relates to scraping motor vehicles and refrigerant is: "29.92"
What is the full response?In cases where a motor vehicle (with an A/C system) is being scraped or junked, the refrigerant must be recovered to a minimum vacuum of 29.92 inches of mercury (or 1,013 millibars) before it is sent off-site to a reclaiming facility.
This is necessary to prevent the release of ozone-depleting substances, such as chlorofluorocarbons (CFCs) and hydrochlorofluorocarbons (HCFCs), into the atmosphere.
The process of recovering refrigerant involves using specialized equipment to extract the refrigerant from the A/C system and store it in a recovery cylinder for transportation to the reclaiming facility. The facility then separates and purifies the refrigerant for reuse or disposal.
Learn more about refrigerant at:
https://brainly.com/question/28265596
#SPJ1
how does the fact that systems often work with other systems affect engineering? group of answer choices it discourages innovation. it supports natural phenomena. it can complicate systems studies. it helps engineers identify problems.
It can help engineers identify problems by recognizing when systems are working with each other. Systems often interact with one another, so it is important for engineers to understand the dynamics of these systems in order to recognize any potential issues or problems. Additionally, this understanding can lead to improved innovation in engineering, as engineers can identify what works and what does not work between systems.
The fact that systems often work with other systems complicates systems studies, and helps engineers identify problems.
How does the fact that systems often work with other systems affect engineering?
Engineering is a vast field that encompasses a wide range of subfields and specializations. Engineers are professionals who specialize in the design, construction, and maintenance of systems that are critical to the smooth running of society. They are also responsible for developing solutions to complex problems that affect individuals, communities, and the environment. Systems engineers work on projects that involve complex systems with interdependent components.
As a result, they need to be able to think critically, solve problems, and collaborate with other professionals to achieve their goals. The fact that systems often work with other systems complicates systems studies, and helps engineers identify problems. When systems interact, they create a complex web of interdependencies that can be difficult to understand. Systems engineers need to be able to identify these interdependencies and analyze the system as a whole. This can be challenging, but it is also rewarding when a solution is found.
How does the fact that systems often work with other systems : https://brainly.com/question/17489470
#SPJ11
A square (10 mm × 10 mm) silicon chip is insulated on one side and cooled on the opposite side by atmospheric air in parallel flow at u[infinity] = 20 m/s and T[infinity] = 24°C. When in use, electrical power dissipation within the chip maintains a uniform heat flux at the cooled surface. If the chip temperature may not exceed 80°C at any point on its surface, what is the maximum allowable power? What is the maximum allowable power if the chip is flush mounted in a substrate that provides for an unheated starting length of 20 mm
The maximum allowable power for the silicon chip when it is flush mounted in a substrate with an unheated starting length of 20 mm is 0.136 W.
To find the maximum allowable power for the silicon chip, we need to use the equation for heat transfer from a flat plate in parallel flow:
q'' = h(Ts - T∞)
Where q'' is the heat flux, h is the heat transfer coefficient, Ts is the surface temperature, and T∞ is the free stream temperature.
We can rearrange this equation to find the maximum allowable power:
q'' = h(Ts - T∞)Pmax = q''A = hA(Ts - T∞)
Where Pmax is the maximum allowable power and A is the area of the chip. We are given the values for u∞, T∞, Ts, and A, so we can plug these into the equation to find Pmax:
u∞ = 20 m/s
T∞ = 24°C
Ts = 80°CA
= (10 mm × 10 mm)
= 0.0001 m²
We also need to find the value for h, which we can do using the equation for the Nusselt number for a flat plate in parallel flow:
[tex]NuL = 0.664Re^{0.5}Pr^0.33[/tex]
Where NuL is the Nusselt number, Re is the Reynolds number, and Pr is the Prandtl number. We can rearrange this equation to find h:
h = (NuLk)/where k is the thermal conductivity and L is the length of the chip. We can find the values for Re and Pr using the equations:
Re = (u∞L)/νPr = (Cpμ)/k
Where ν is the kinematic viscosity, Cp is the specific heat capacity, and μ is the dynamic viscosity. We can find the values for these properties using the given values for u∞ and T∞ and looking up the properties of air at these conditions:
ν = 15.68 × 10^-6 m²/s
Cp = 1007 J/kg·Kμ
= 18.46 × 10^-6 kg/m·sk
= 0.02624 W/m·K
We can now plug these values into the equations to find Re, Pr, NuL, and h:
Re = (20 m/s × 0.01 m)/(15.68 × 10^-6 m²/s)
= 12755.1Pr =
(1007 J/kg·K × 18.46 × 10^-6 kg/m·s)/(0.02624 W/m·K)
= 0.708NuL
= 0.664(12755.1^0.5)(0.708^0.33)
= 59.58h
= (59.58 × 0.02624 W/m·K)/0.01 m
= 155.6 W/m²
We can now plug these values into the equation for Pmax to find the maximum allowable power:
Pmax = (155.6 W/m²·K)(0.0001 m²)(80°C - 24°C) = 0.874 W
We can use the equation for the Nusselt number for a flat plate with an unheated starting length:
NuL = 0.3387(ReLPr)^(1/3)
Where L is the length of the heated portion of the plate.
We can plug in the values for Re, Pr, and L to find NuL:
NuL = 0.3387(12755.1 × 0.01 m × 0.708)^(1/3)
= 9.23
We can now use this value for NuL to find a new value for h:
h = (9.23 × 0.02624 W/m·K)/0.01 m = 24.25 W/m²·
We can now plug this value for h into the equation for Pmax to find the maximum allowable power:
Pmax = (24.25 W/m²·K)(0.0001 m²)(80°C - 24°C)
= 0.136 W
To learn more about Power :
https://brainly.com/question/30817666
#SPJ4
What are the differences among engineers, mathematics and scientist
Engineers apply their knowledge of mathematics and science to solve real-world problems, mathematicians develop and prove new mathematical theories and principles, and scientists use the scientific method to study the natural world and understand phenomena.
Engineers use their knowledge of mathematics and science to design and build practical solutions to real-world problems. They apply their knowledge of physics, chemistry, and mathematics to design, develop, test, and improve products, systems, and processes. They focus on the application of theories and principles to develop practical solutions that meet specific needs or goals.
Mathematicians, on the other hand, use their expertise in mathematics to study abstract concepts, develop new theories, and prove mathematical theorems. They focus on the development of mathematical theories and principles that can be applied to a wide range of fields, including engineering, physics, and computer science. Their work often involves developing new algorithms, models, and methods that can be used to solve complex problems.
Scientists use the scientific method to study the natural world, understand phenomena, and test hypotheses. They use a wide range of tools and techniques to gather data, analyze it, and draw conclusions. Their work often involves designing experiments, conducting observations, and developing models to explain natural phenomena. Scientists focus on understanding the underlying principles that govern the behavior of the natural world.
For more such questions on Engineers, click on:
https://brainly.com/question/30353036
#SPJ11
fill in the blank. two categories of laser printers are___. two categories of laser printers are___. active-matrix and passive matrix thermal and personal ink-jet and high-definition personal and shared
Two categories of laser printers are personal and shared. Personal laser printers are designed for individual use, typically in a home or small office setting.
Shared laser printers are designed for use by multiple people in a larger office setting. It is important to note that the terms "active-matrix" and "passive-matrix" do not apply to laser printers, but rather to different types of LCD screens. "Thermal" and "ink-jet" are also not categories of laser printers, but rather different types of printers altogether. Laser printers use toner, rather than ink, to produce high-quality prints.
Learn more about matrix: https://brainly.com/question/2456804
#SPJ11
A pipe is insulated such that the outer radius of the insulation is less than the critical radius. Now the insulation is taken off. Will the rate of heat transfer from the pipe increase or decrease for the same pipe surface temperature? Explain with the proper formulation or graph.
The rate of heat transfer from the pipe will increase when the insulation is taken off if the outer radius of the insulation is less than the critical radius. This is because the critical radius of insulation is the radius at which the rate of heat transfer is minimized.
When the insulation radius is less than the critical radius, the rate of heat transfer is actually higher than it would be without any insulation at all. Therefore, removing the insulation will increase the rate of heat transfer from the pipe for the same pipe surface temperature.
The critical radius of insulation can be calculated using the following formula:
[tex]r_c = k/h[/tex]
Where [tex]r_c[/tex] is the critical radius of insulation, k is the thermal conductivity of the insulation, and h is the heat transfer coefficient of the fluid surrounding the pipe. If the outer radius of the insulation is less than this critical radius, then removing the insulation will increase the rate of heat transfer.
This can be seen graphically as well, where the rate of heat transfer is plotted against the insulation thickness. The graph will show a minimum at the critical radius, and any insulation thickness less than this will result in a higher rate of heat transfer.
Learn more about insulation
https://brainly.com/question/18598066
#SPJ11
Why optical microscopes are so named?
Answer: The optical microscope, also referred to as a light microscope, is a type of microscope that commonly uses visible light and a system of lenses to generate magnified images of small objects. Optical microscopes are the oldest design of microscope and were possibly invented in their present compound form in the 17th century. Basic optical microscopes can be very simple, although many complex designs aim to improve resolution and sample contrast.
The object is placed on a stage and may be directly viewed through one or two eyepieces on the microscope. In high-power microscopes, both eyepieces typically show the same image, but with a stereo microscope, slightly different images are used to create a 3-D effect. A camera is typically used to capture the image (micrograph).
The sample can be lit in a variety of ways. Transparent objects can be lit from below and solid objects can be lit with light coming through (bright field) or around (dark field) the objective lens. Polarised light may be used to determine crystal orientation of metallic objects. Phase-contrast imaging can be used to increase image contrast by highlighting small details of differing refractive index.
A range of objective lenses with different magnification are usually provided mounted on a turret, allowing them to be rotated into place and providing an ability to zoom-in. The maximum magnification power of optical microscopes is typically limited to around 1000x because of the limited resolving power of visible light. While larger magnifications are possible no additional details of the object are resolved.
Alternatives to optical microscopy which do not use visible light include scanning electron microscopy and transmission electron microscopy and scanning probe microscopy and as a result, can achieve much greater magnifications.
. consider a 2d triangular lattice illuminated by an electron beam of 10 kev energy. assume equilateral triangles. take the lattice spacing in the x-direction to be 0.15 nm. a. sketch the diffraction pattern for the three lowest orders. b. repeat for isosceles triangle with height equal to base and energy of 100 kev.
The diffraction pattern of a lattice is determined by the Bragg's law, which states that nλ = 2d sin θ, where n is the order of diffraction, λ is the wavelength of the incident beam, d is the lattice spacing, and θ is the angle of incidence. For a 2D triangular lattice with a lattice spacing of 0.15 nm in the x-direction, the diffraction pattern will have three lowest orders corresponding to n = 1, 2, and 3.
The diffraction pattern for an isosceles triangle lattice with a height equal to its base will also have three lowest orders, but the angles of incidence will be different due to the different lattice spacing. The energy of the incident beam also affects the wavelength of the beam and therefore the diffraction pattern. A higher energy beam will have a shorter wavelength and will produce a different diffraction pattern than a lower energy beam.
Learn more about diffraction pattern
https://brainly.com/question/24305019
#SPJ11
the first todo is to gather the necessary input from the user to complete the story. create the variables that you will need; be mindful of which data types to use! remember that string input should use getline instead of just cin by itself.
To gather the necessary input from the user to complete the story, we will need to create variables that will store the input from the user. It is important to be mindful of which data types to use for each variable. For string input, we should use `getline` instead of just `cin` by itself.
Here is an example of how to create the variables and gather the input from the user:
```cpp
// Declare variables
string name;
int age;
char gender;
// Get input from user
cout << "Enter your name: ";
getline(cin, name);
cout << "Enter your age: ";
cin >> age;
cout << "Enter your gender (M/F): ";
cin >> gender;
```
In this example, we have created three variables: `name` (string), `age` (int), and `gender` (char). We then use `getline` to get the string input from the user for the `name` variable, and `cin` to get the int and char input for the `age` and `gender` variables.
Remember to always be mindful of the data types you are using for each variable, and to use `getline` for string input to ensure that the entire string is captured.
Learn more about programming:
https://brainly.com/question/26134656
#SPJ11
a tensile test was conducted on an aluminum specimen of 2.95 mm radius. the tensile peak load was recorded as 4281 n. 5pts a) find the ultimate tensile stress in mpa. the same specimen was used in shear after fracture in the previous tensile test. the new radius was recorded as 2.9 mm and the shear force of 4100 n. b) find the stress in mpa.
The ultimate tensile stress in MPa is 156.823 MPa and the shear stress in MPa is 155.146 MPa.
The ultimate tensile stress can be found by dividing the tensile peak load by the cross-sectional area of the specimen. The cross-sectional area of a circular specimen is given by πr^2. The stress in MPa can be found by dividing the stress in N/m^2 by 10^6.
a) The ultimate tensile stress in MPa is:
Ultimate tensile stress = (Tensile peak load) / (Cross-sectional area)
= (4281 N) / (π(2.95 mm)^2)
= (4281 N) / (27.298 mm^2)
= 156.823 N/mm^2
= 156.823 MPa
b) The shear stress in MPa is:
Shear stress = (Shear force) / (Cross-sectional area)
= (4100 N) / (π(2.9 mm)^2)
= (4100 N) / (26.423 mm^2)
= 155.146 N/mm^2
= 155.146 MPa
Learn more about MPa:
https://brainly.com/question/30587466
#SPJ11
Give FOUR characteristics of the magnetic lines of force. You are given FOUR-3 V cells. Draw a circuit diagram to show how you will supply a load (RL) that operates at 6 V using all FOUR cells. €
The FOUR characteristics of the magnetic lines of force are:
They always form closed loops that start from the north pole and end at the south pole.They do not cross each other.They are stronger at the poles and weaker at the equator of a magnet.They exert a force on any charged particle that moves within them.How will the circuit supply a load that operates at 6 V using four 3 V cells?To supply a load that operates at 6 V using four 3 V cells, we can connect the cells in series to increase the total voltage. We can connect two sets of two cells in series, and then connect these two sets in parallel.
This will give us a total voltage of 12 V (3 V + 3 V + 3 V + 3 V) and a current capacity that is equal to the capacity of each individual cell. We can then use a voltage regulator or a resistor to drop the voltage to 6 V, and connect the load RL in series with the voltage regulator or resistor. The circuit diagram will look like:
[3 V]---[3 V]--[3 V]---[3 V]--|
+---[RL]---(voltage regulator or resistor)---|
|
[ground]--------------------------------------------------------------------|
Note that the cells are connected in series in pairs, and the pairs are connected in parallel. The load is connected in series with the voltage regulator or resistor.
Learn more about Magnetic Lines:
https://brainly.com/question/17011493
#SPJ1
estimate the theoretical fracture strength of a brittle material if it is known that fracture occurs by the propagation of an elliptically shaped surface crack of length 0.29 mm and that has a tip radius of curvature of 0.004 mm when a stress of 1300 mpa is applied.
The theoretical fracture strength of the brittle material is estimated to be approximately 165.6 MPa when a stress of 1300 MPa is applied and fracture occurs by the propagation of an elliptically shaped surface crack of length 0.29 mm and tip radius of curvature of 0.004 mm.
To estimate the theoretical fracture strength of a brittle material given the information provided, we can use Griffith's theory of brittle fracture. According to this theory, the fracture strength of a brittle material can be expressed as:
σ_f = (2Eγπa)^0.5
where σ_f is the fracture strength, E is the elastic modulus, γ is the surface energy per unit area, and a is the length of the elliptically shaped surface crack.
To calculate the fracture strength, we need to first determine the surface energy per unit area of the material. For glass, a typical value of surface energy is around 1 J/m^2.
Given the length of the elliptically shaped surface crack (a) is 0.29 mm, and the tip radius of curvature is 0.004 mm, we can calculate the crack area (A) as follows:
A = πab = π(0.29/2)(0.004)
A ≈ 5.67 x 10^-7 m^2
Next, we can calculate the elastic modulus (E) of the material. For glass, the elastic modulus is typically around 70 GPa.
Substituting these values into the equation for fracture strength, we get:
σ_f = (2Eγπa)^0.5 = [2(70 x 10^9)(1)(π)(0.29 x 10^-3)]^0.5
σ_f ≈ 165.6 MPa
Learn more about theoretical fracture strength at: https://brainly.com/question/13707729
#SPJ11
The rigid bar is supported by the pin-connected rod CB that has a cross-sectional area of 14mm^2 and is made from 6061-T6 aluminum. Determine the vertical deflection of the bar at D when the distributed load is applied
The vertical deflection of the bar at D can be determined by using the equation for deflection of a beam with a distributed load.
First, we need to calculate the moment of inertia (I) of the rod CB. The moment of inertia for a circular cross-section is given by:
I = (pi/4) * r^4
Where r is the radius of the cross-section. In this case, the cross-sectional area of the rod is 14mm^2, so we can calculate the radius as follows:
14mm^2 = (pi/4) * r^2
r = sqrt((14mm^2 * 4)/pi) = 2.12mm
Now we can calculate the moment of inertia:
I = (pi/4) * (2.12mm)^4 = 39.9mm^4
Next, we need to calculate the elastic modulus (E) of the 6061-T6 aluminum. The elastic modulus for this material is typically around 68.9 GPa (68.9 x 10^9 Pa).
Now we can use the equation for deflection of a beam with a distributed load to calculate the vertical deflection at D:
delta = (5/384) * (w * L^4)/(E * I)
Where delta is the vertical deflection, w is the distributed load, L is the length of the beam, E is the elastic modulus, and I is the moment of inertia. In this case, we have:
delta = (5/384) * (w * (0.8m)^4)/(68.9 x 10^9 Pa * 39.9mm^4)
Simplifying and converting units gives:
delta = (5/384) * (w * (800mm)^4)/(68.9 x 10^9 Pa * 39.9mm^4) = (1.05 x 10^-6) * w
Therefore, the vertical deflection of the bar at D is given by:
delta = (1.05 x 10^-6) * w
Where w is the distributed load in N/m.
Learn more about The vertical deflection of the bar:
https://brainly.com/question/17080885
#SPJ11
Pipe 2 has been inserted snugly into Pipe 1, but the holes for a connecting pin do not line up; there is a gap s. The user decides to apply either force P1 to Pipe 1 or force P2 to Pipe 2, whichever is smaller. Determine the following using the numerical properties in the box.
(a) If only P1 is applied, find P1 (kips) required to close gap s; if a pin is then inserted and P1 removed, what are reaction forces RA and RB for this load case?
(b) If only P2 is applied, find P2 (kips) required to close gap s; if a pin is inserted and P2 removed, what are reaction forces RA and RB for this load case?
(c) What is the maximum shear stress in the pipes, for the loads in parts (a) and (b)?
(d) If a temperature increase ΔT is to be applied to the entire structure to close gap s (instead of applying forces P1 and P2), find the ΔT required to close the gap. If a pin is inserted after the gap has closed, what are reaction forces RA and RB for this case?
(e) Finally, if the structure (with pin inserted) then cools to the original ambient temperature, what are reaction forces RA and RB?
We determine the questions, according to the numerical properties:
(a) To find P1, we need to use the formula for force applied to a cantilever beam with a point load at the end:
P1 = (3EI/s)L
Where E is the modulus of elasticity, I is the moment of inertia, s is the gap, and L is the length of the beam. Plugging in the given values, we get:
P1 = (3(30x10^6)(0.196)(12))/0.25 = 84.48 kips
After the pin is inserted and P1 is removed, the reaction forces at the supports are equal and opposite to the applied force, so RA = -P1/2 = -42.24 kips and RB = P1/2 = 42.24 kips.
(b) To find P2, we need to use the same formula but with the length of Pipe 2 instead of Pipe 1:
P2 = (3EI/s)L
P2 = (3(30x10^6)(0.196)(8))/0.25 = 56.32 kips
After the pin is inserted and P2 is removed, the reaction forces at the supports are equal and opposite to the applied force, so RA = -P2/2 = -28.16 kips and RB = P2/2 = 28.16 kips.
(c) The maximum shear stress in the pipes occurs at the supports and is equal to the reaction force divided by the cross-sectional area of the pipe. For Pipe 1, the maximum shear stress is RA/A = (-42.24 kips)/(π(2.5^2 - 2^2)) = -10.72 ksi. For Pipe 2, the maximum shear stress is RB/A = (28.16 kips)/(π(2.5^2 - 2^2)) = 7.15 ksi.
(d) To find the temperature increase required to close the gap, we need to use the formula for thermal expansion:
ΔL = αLΔT
Where ΔL is the change in length, α is the coefficient of thermal expansion, L is the original length, and ΔT is the temperature change. Rearranging the formula and plugging in the given values, we get:
ΔT = (s)/(αL) = (0.25)/(11.7x10^-6)(12) = 1785.47°F
After the pin is inserted, the reaction forces at the supports are equal and opposite to the thermal expansion force, so RA = -P1/2 = -42.24 kips and RB = P1/2 = 42.24 kips.
(e) When the structure cools back to the original ambient temperature, the reaction forces at the supports will be zero because there is no longer any thermal expansion force. So RA = 0 kips and RB = 0 kips.
Learn more about numerical properties:
https://brainly.com/question/28210762
#SPJ11
Assume that there is a radio button control priceRadioButton and a textbox control priceTextBox. Write if-else statements to disable the textbox if the radio button is not checked and enable the textbox if the radio button is checked.
To disable the textbox if the radio button is not checked and enable the textbox if the radio button is checked, we can use the `checked` property of the radio button and the `disabled` property of the textbox. Here is the code:
```html
if (priceRadioButton.checked) {
priceTextBox.disabled = false;
} else {
priceTextBox.disabled = true;
}
```
This will check the `checked` property of the `priceRadioButton` and if it is `true`, it will set the `disabled` property of the `priceTextBox` to `false`, enabling the textbox. If the `checked` property of the `priceRadioButton` is `false`, it will set the `disabled` property of the `priceTextBox` to `true`, disabling the textbox.
Learn more about radio button control:
https://brainly.com/question/29557793
#SPJ11
which is intended to return true if 0 is found in its two-dimensional array parameter arr and false otherwise. The method does not work as intended.public boolean findZero(int[][] arr){for (int row = 0; row <= arr.length; row++){for (int col = 0; col < arr[0].length; col++){if (arr[row][col] == 0){return true;}}}return false;}Which of the following values of arr could be used to show that the method does not work as intended?
The value of arr that could be used to show that the method does not work as intended is:
int[][] arr = {{1, 2, 3}, {4, 5, 6}, {7, 8, 0}};
This value of arr can be used to show that the method does not work as intended because the method is supposed to return true if 0 is found in its two-dimensional array parameter arr. However, in this case, the method will throw an ArrayIndexOutOfBoundsException.
This is because the for loop that iterates over the rows of the array is using the <= operator instead of the < operator. This means that the loop will try to access an index that is one greater than the last valid index of the array, causing an ArrayIndexOutOfBoundsException.
To fix this issue, the for loop that iterates over the rows of the array should use the < operator instead of the <= operator:
for (int row = 0; row < arr.length; row++)
With this change, the method will correctly return true if 0 is found in its two-dimensional array parameter arr and false otherwise.
Learn more about programming:
https://brainly.com/question/26134656
#SPJ11
Consider a 50-cm-diameter and 95-cm-long hot water tank. The tank is placed on the roof of a house. The water inside the tank is heated to 808C by a flat-plate solar collector during the day. The tank is then exposed to windy air at 188 C with an average velocity of 40 km/h during the night. Estimate the temperature of the tank after a 45-min period. Assume the tank surface to be at the same temperature as the water inside, and the heat transfer coefficient on the top and bottom surfaces to be the same as that on the side surface. Evaluate the air properties at 508C
The temperature of the tank after a 45-min period is estimated to be 30.908 K.
What is temperature?Temperature is a measure of how hot or cold something is relative to a standard reference point. It is typically measured in degrees Celsius (°C), Kelvin (K), or Fahrenheit (°F).
The rate of heat transfer can be estimated by using the following equation: Q = hA∆T
From the given data, the surface area of the tank is calculated as:
A = πr2 = π (0.25 m)2 = 0.19625 m2
The heat transfer coefficient for a windy environment can be estimated by using the following equation: h = 0.024V1/2, where V is the wind speed (m/s).
From the given data, the wind speed is calculated as: V = 40 km/h = 11.1 m/s
Therefore, the heat transfer coefficient is calculated as: h = 0.024 (11.1)1/2 = 0.92 W/m2K
The temperature difference between the air and the tank is calculated as: ∆T = (Tair – Ttank) = (288 K – 308 K) = -20 K
Therefore, the rate of heat transfer is calculated as:
Q = hA∆T = (0.92 W/m2K) (0.19625 m2) (-20 K) = -3.7 W
Since the tank is losing heat, the rate of heat transfer is negative.
From the given data, the mass of the water in the tank is calculated as:
m = ρV = (1,000 kg/m3) (0.095 m3) = 95 kg
The specific heat capacity of water is assumed to be 4,186 J/KgK.
Therefore, the temperature difference is calculated as:
∆T = Q/(mc) = (-3.7 W)/ [(95 kg) (4,186 J/KgK)] = -0.0089 K
Therefore, the temperature of the tank after a 45-min period is estimated to be 30.908 K.
To learn more about temperature
https://brainly.com/question/15969718
#SPJ1
Extraction of bio ethanol from sugarcane process
Ethanol production from sugarcane is comprised by the following steps: cleaning of sugarcane and extraction of sugars; juice treatment, concentration and sterilization; fermentation; distillation and dehydration.
2.3. Provide the weathering products of the following minerals.
2.3.1 Feldspar
2.3.2 Pyrite
2.4. Distinguish between Breccia and Conglomerate.
2
[22 marks]
(2)
(2)
(2)
2.3.1 Common mineral feldspar is subject to weathering processes when exposed to water and gases in the atmosphere. Feldspar can be transformed into clay minerals like kaolinite and illite.
What do feldspar's weathering byproducts consist of?The ferromagnesian silicates and feldspar are very prone to break down into tiny pieces during the course of weathering and transform into clay minerals and dissolved ions (such as Ca2+, Na+, K+, Fe2+, Mg2+, and H4SiO4). In other words, the most frequent byproducts of weathering are quartz, clay minerals, and dissolved ions.
What is breccia made of?A rock known as breccia (/brti, /br-/) is made up of massive, sharply shattered shards of minerals or rocks that are bound together by a fine-grained matrix.
To know more about transformed visit:-
https://brainly.com/question/26767532
#SPJ1
For the figure shown below, assume that Vs = 10 sin(333t + 45o )V, (a) find the total impedance of the circuit and is in phasors form [15 marks] (b) find the currents iR and iL in phasor form [10 marks] (c) obtain the expressions for is, iL, and iR as single sinusoids [10 marks] (d) determine the instantenous values of is, iL and iR at t=0 s.
Answer:
see bold numbers below
Explanation:
Given the attached series-parallel circuit, you want to know ...
the total impedance (phasor)the source current (phasor and sinusoid)the branch currents (phasor and sinusoids)the currents at t=0Total impedanceThe circuit impedance is the sum of the series resistance and the parallel combination of the 1Ω resistor and the 3 mH inductor. For ω = 333, the inductor's impedance is Xl = jωL = j(333)(.003)Ω = j0.999Ω.
The total impedance is the sum ...
Ztot = 10 + 1/(1/1 +1/j0.999) = 10.51∠2.73°
Circuit currentsThe total current in the circuit is ...
Is = Vs/Ztot = 10∠45°/10.51∠2.73° = 0.9513∠42.27°
The branch currents are in reverse proportion to the branch impedance
Ir = Is(Xl/(1+Xl)) = 0.6724∠87.30°
Il = Is(1/(1+Xl)) = 0.6730∠-2.70°
Sine functionExpressed as a sine function, these have the magnitude and phase angle indicated by the phasor:
Is(t) = 0.9513·sin(333t +42.27°)
Ir(t) = 0.6724·sin(333t +87.30°)
Il(t) = 0.6730·sin(333t -2.70°)
Current at t=0At t=0, each of these current values is the magnitude of the current multiplied by the sine of the phase angle. In effect, it is the imaginary part of the current when it is expressed in complex form.
Is(0) = 0.9513·sin(42.27°) = 0.6399 A
Ir(0) = 0.6724·sin(87.30°) = 0.6716 A
Il(0) = 0.6730·sin(-2.70°) = -.0317 A
__
Additional comment
Solving these problems is immensely aided by a calculator that easily handles complex numbers. The one shown in the attachments does not thread polar conversions over a list, but otherwise works nicely for this problem. Angle mode is set to degrees. The value of x is 0.999i.
the composite shaft, consisting of aluminum, copper, and steel sections, is subjected to the loading shown. determine (a) the displacement of end a wi
The displacement of end A with respect to the fixed support C is 0.00085 m
The displacement of end A with respect to the fixed support C can be determined using the principle of superposition, which states that the displacement of a point on a composite shaft is equal to the sum of the displacements caused by each individual load.
First, we need to determine the displacements caused by the 8 kN and 6 kN loads separately. We can use the equation for the displacement of a point on a shaft subjected to a concentrated load:
δ = PL/EA
Where P is the load, L is the length of the shaft section, E is the modulus of elasticity, and A is the cross-sectional area.
For the 8 kN load:
δ1 = (8 kN)(0.6 m) / (70 GPa)(0.0001 m²) = 0.000686 m
For the 6 kN load:
δ2 = (6 kN)(0.3 m) / (110 GPa)(0.0001 m²) = 0.000164 m
The total displacement of end A with respect to the fixed support C is the sum of these two displacements:
δ = δ1 + δ2 = 0.000686 m + 0.000164 m = 0.00085 m
Learn more about the principle of superposition:
https://brainly.com/question/20335933
#SPJ11
Consider a Lear jet flying at a velocity of 250 m/s at an altitude of 10 km, where the density and temperature are 0.414 kg/m3 and 223 K, respectively. Consider also a one-fifth scale model of the Lear jet being tested in a wind tunnel in the laboratory. The pressure in the test section of the wind tunnel is 1 atm = 1.01x105 N/m2. Calculate the necessary velocity, temperature, and density of the airflow in the wind-tunnel test section such that the lift and drag coefficients are the same for the wind-tunnel model and the actual airplane in flight. (R=287 J/kg-K; Assume 'a' and 'p' are directly proportional to T12)
The necessary velocity, temperature, and density of the airflow in the wind-tunnel test section are 1250 m/s, 89.2 K, and 2.07 kg/m3, respectively.
To calculate the necessary velocity, temperature, and density of the airflow in the wind-tunnel test section such that the lift and drag coefficients are the same for the wind-tunnel model and the actual airplane in flight, we need to use the concept of dynamic similarity. Dynamic similarity occurs when the forces acting on two systems are proportional to each other. This is achieved when the Reynolds number and the Mach number are the same for both systems.
Reynolds number (Re) = (ρVd)/μ
Mach number (Ma) = V/a
Where ρ is the density, V is the velocity, d is the characteristic length, μ is the dynamic viscosity, and a is the speed of sound.
Since the wind-tunnel model is one-fifth the size of the actual airplane, the characteristic length (d) for the model will be one-fifth the characteristic length of the actual airplane.
dmodel = (1/5)dairplane
To achieve dynamic similarity, we need to have the same Reynolds number and Mach number for both systems.
Reairplane = Remodel
(ρairplaneVairplanedairplane)/μairplane = (ρmodelVmodeldmodel)/μmodel
Similarly, we need to have the same Mach number for both systems.
Maairplane = Mamodel
Vairplane/aairplane = Vmodel/amodel
Using the given values and the equations above, we can calculate the necessary velocity, temperature, and density of the airflow in the wind-tunnel test section.
ρmodel = (ρairplaneVairplanedairplaneμmodel)/(Vmodeldmodelμairplane)
Tmodel = (TairplaneVairplane^2)/(Vmodel^2)
Vmodel = (Vairplaneaairplane)/amodel
Plugging in the given values:
ρmodel = (0.414 kg/m3)(250 m/s)(10 km)(1.01x10^5 N/m2)/(Vmodel)(1/5)(10 km)(1.01x10^5 N/m2)
Tmodel = (223 K)(250 m/s)^2/(Vmodel^2)
Vmodel = (250 m/s)(√(287 J/kg-K)(223 K))/(√(287 J/kg-K)(Tmodel))
Solving for Vmodel, Tmodel, and ρmodel, we get:
Vmodel = 1250 m/s
Tmodel = 89.2 K
ρmodel = 2.07 kg/m3
Therefore, the necessary velocity, temperature, and density of the airflow in the wind-tunnel test section are 1250 m/s, 89.2 K, and 2.07 kg/m3, respectively.
Learn more about velocity
https://brainly.com/question/24445340
#SPJ11
Determine the pull force necessary on the rope to reduce the pressure of the liquid trapped inside a piston cylinder device to 76 kPa Assume the piston to be weightless with a diameter of 0.25 m, the outside pressure to be 100 kPa and g = 9.81 m/s Part A Express your answer to three significant figures.
The pull force necessary on the rope to reduce the pressure of the liquid trapped inside a piston cylinder device to 76 kPa is 1.18 kN, expressed to three significant figures.
To determine the pull force necessary on the rope to reduce the pressure of the liquid trapped inside a piston cylinder device to 76 kPa, we can use the equation:
F = (P1 - P2) * A
where F is the force, P1 is the outside pressure, P2 is the pressure inside the piston, and A is the area of the piston.
Given that the outside pressure is 100 kPa, the pressure inside the piston is 76 kPa, and the diameter of the piston is 0.25 m, we can calculate the area of the piston as:
A = π * (d/2)2 = π * (0.25/2)2 = 0.0491 m2
Plugging in the values into the equation, we get:
F = (100 - 76) * 0.0491 = 1.18 kN
Learn more about The pull force:
https://brainly.com/question/24791348
#SPJ11
Someone help a brother out....
Game Designing Quiz
QUESTION 1
Which of the following acronyms is used to describe 3D modeling programs that are used in fields that require precise and exact real-world measurements such as constructions and manufacturing?
A: CSS
B: CAD
C: C++
D: LAMP
QUESTION 2
As a car designer, Vic uses computer programs to create 3D models of car parts for production. For what reason must the applications that Vic uses be extremely precise and detailed?
A: To maintain safety and production quality
B: To ensure the project stays within budget
C: To ensure the project stays within budget
D: To ensure the project stays within budget
QUESTION 3
Which of the following features is likely to be MOST helpful in a 3D modeling program used by designers in the automotive industry?
A: Particle Systems
B: Third-Person game mode
C: Plumbing Simulations
D: Wheel Physics
QUESTION 4
Marcus works in construction and uses programs that allow him to model the building itself, as well as the electrical wiring, plumbing, and heating needs of the building. Which type of program would be most helpful to Marcus?
A: CAD
B: TinkerCAD
C: Blender
D: PhysX
Answer:
I need help also
Answer 1: The correct answer is B: CAD as it is used to describe 3D modeling programs that are used in fields that require precise and exact real-world measurements
What is CAD?CAD stands for Computer-Aided Design, which is used in fields such as construction, manufacturing, and engineering to create 2D or 3D models of products, buildings, and machines. These programs allow for precise measurements and calculations, making them essential in these industries where accuracy is critical.
Answer 2: The correct answer is A: To maintain safety and production quality. In the automotive industry, precise 3D modeling is necessary to ensure the safety of the vehicle and its occupants. The models must accurately represent every aspect of the car's design, from the smallest component to the overall structure. If the models are not precise, it could lead to production errors or safety hazards.
Answer 3: The correct answer is D: Wheel Physics. In the automotive industry, designers need to create 3D models of the vehicle that accurately represent the physics of its movement. This includes factors such as acceleration, braking, and steering, which are critical to the car's performance. Wheel physics is one such feature that would be helpful in this context.
Answer 4: The correct answer is A: CAD. CAD programs are commonly used in the construction industry to create 2D or 3D models of buildings and infrastructure. These programs allow designers to visualize the building's structure and layout, as well as its electrical, plumbing, and heating needs. This can help to identify potential design flaws, streamline construction processes, and ensure that the final product meets safety and quality standards.
Read more about 3D modeling here:
https://brainly.com/question/27512139
#SPJ1
Explain questions 4. A and 4. B briefly in two or three sentences. You can try to compile and to debug the code. Please note, we do not modify the data structure. The variable matrix represents a 2D array of integers. 4. A - Why does the following code have memory leaks? 4. B - How can we fix the problem? Find the bug that is causing the problem. Void buildMatrix (int **matrix, int m, int n) { int init = 10;
matrix new int* [m]; for (int i 0; i
}
A. The following code has memory leaks because it allocates memory dynamically for each row of the matrix using "new" keyword.
B. We need to free the memory that has been allocated using "delete" keyword.
A - The following code has memory leaks because it allocates memory dynamically for each row of the matrix using "new" keyword, but it does not free the allocated memory using "delete" keyword. This can lead to memory leakage in the program.
B - To fix the problem, we need to free the memory that has been allocated using "delete" keyword. We can add a loop at the end of the function to iterate through each row of the matrix and delete the allocated memory using "delete" keyword. The correct code for the function buildMatrix would be:
void buildMatrix(int *matrix, int m, int n) {
int init = 10;
matrix = new int[m];
for(int i = 0; i < m; i++) {
matrix[i] = new int[n];
for(int j = 0; j < n; j++) {
matrix[i][j] = init;
init++;
}
}
// Free the allocated memory
for(int i = 0; i < m; i++) {
delete [] matrix[i];
}
delete [] matrix;
}
Learn more about memory leaks here https://brainly.com/question/30019797
#SPJ4
From what I understand, If a minor holds a learners permit, they can only drive as long as someone the age of 21 or older with a valid driver's license is accompanying in the passenger seat. Can they have a minor in the backseat as well? or is only the Adult allowed in the vehicle?
Basically can a minor with a learners permit drive with an Adult over the age of 21, AND a minor at the same time, or is no on else allowed in the car.
a manual metal arc welding operation is performed on mild steel with a melting temp of 1776 k at a voltage of 25 v and a current of 200 a calculate an approximate value fo the melting energy er unit vlunme
The approximate melting energy per unit volume for a manual metal arc welding operation on mild steel with a melting temperature of 1776 K, voltage of 25 V, and current of 200 A is 5237692500 J/m³.
To calculate the approximate melting energy per unit volume for a manual metal arc welding operation on mild steel with a melting temperature of 1776 K, voltage of 25 V, and current of 200 A, follow these steps:
1. Calculate the power of the welding operation:
Power = Voltage × Current
Power = 25 V × 200 A = 5000 W
2. Determine the specific heat capacity of mild steel. The specific heat capacity of mild steel is approximately 450 J/kg·K.
3. Calculate the mass of mild steel per unit volume. The density of mild steel is approximately 7850 kg/m³.
4. Calculate the energy required to heat 1 kg of mild steel to its melting temperature.
Energy = Specific Heat Capacity × Mass × Temperature Change
Energy = 450 J/kg·K × 1 kg × (1776 K - 293 K)
Energy = 450 J/kg·K × 1 kg × 1483 K
Energy = 667350 J/kg
5. Calculate the energy required to heat 1 m³ of mild steel to its melting temperature.
Energy = Specific Heat Capacity × Mass × Temperature Change
Energy = 667350 J/kg × 7850 kg/m³
Energy = 5237692500 J/m³
Learn more about Energy:
https://brainly.com/question/25737117
#SPJ11
At a point in a structural member, yielding occurs under a state of stress given by 0 40 0 40 50 -60 MPa 0 -60 0 Determine the uniaxial tensile yield strength of the material according to the maximum distortion energy theory. What is the octahedral shear stress at this point? Compare this octahedral shear stress with the maximum shear stress that develops under uniaxial tension when the material reaches its uniaxial tensile yield strength.
The maximum shear stress that develops under uniaxial tension when the material reaches its uniaxial tensile yield strength is 52.8 MPa.
This is lower than the octahedral shear stress at this point (81.1 MPa), which indicates that the material is more likely to fail under the state of stress given in the question than under uniaxial tension.
According to the maximum distortion energy theory, the uniaxial tensile yield strength of the material can be determined using the following equation:
σy = √[(σ1-σ2)^2 + (σ2-σ3)^2 + (σ3-σ1)^2]/√2
Where σ1, σ2, and σ3 are the principal stresses.
In this case, the principal stresses are:
σ1 = 40 MPa
σ2 = 50 MPa
σ3 = -60 MPa
Plugging these values into the equation gives:
σy = √[(40-50)^2 + (50-(-60))^2 + (-60-40)^2]/√2
σy = √[100 + 12100 + 10000]/√2
σy = √[22200]/√2
σy = 105.5 MPa
Therefore, the uniaxial tensile yield strength of the material is 105.5 MPa.
The octahedral shear stress at this point can be determined using the following equation:
τoct = √[(σ1-σ2)^2 + (σ2-σ3)^2 + (σ3-σ1)^2]/3
Plugging in the same principal stresses gives:
τoct = √[(40-50)^2 + (50-(-60))^2 + (-60-40)^2]/3
τoct = √[100 + 12100 + 10000]/3
τoct = √[22200]/3
τoct = 81.1 MPa
Therefore, the octahedral shear stress at this point is 81.1 MPa.
To compare this octahedral shear stress with the maximum shear stress that develops under uniaxial tension when the material reaches its uniaxial tensile yield strength, we can use the following equation:
τmax = σy/2
Plugging in the uniaxial tensile yield strength gives:
τmax = 105.5/2
τmax = 52.8 MPa
Learn more about uniaxial tension:
https://brainly.com/question/13390917
#SPJ11
let x denote the amount of time a book on two-hour reserve is actually checked out, and suppose the cdf is the following. f(x)
The cdf of the amount of time a book on two-hour reserve is actually checked out can be represented by the function F(x) = P(X ≤ x), where X is the random variable representing the amount of time the book is checked out and x is a specific value of time.
If the cdf is given as f(x), we can find the probability that the book is checked out for a specific amount of time by evaluating the function at that value of x. For example, if we want to find the probability that the book is checked out for less than or equal to one hour, we would evaluate f(1) to get the probability.
Similarly, if we want to find the probability that the book is checked out for more than one hour but less than or equal to two hours, we would evaluate f(2) - f(1) to get the probability.
It is important to note that the cdf, F(x), gives the probability that the book is checked out for less than or equal to a specific amount of time, while the pdf, f(x), gives the probability density at a specific amount of time. The pdf can be found by taking the derivative of the cdf, F'(x) = f(x).
Learn more about The pdf:
https://brainly.com/question/29454290
#SPJ11
Need help with question
Answer:
Explanation:
iven the following stress time histories (stress versus time) draw the corresponding strain time history for a maxwell element and then again on another plot for a kelvin element. do the two plots for each of the following two stress histories.
In a Maxwell element, the stress and strain are directly proportional to each other. This means that as the stress increases, the strain also increases at the same rate.
Therefore, the strain time history for a Maxwell element will look exactly like the stress time history, just scaled by a factor of the modulus of elasticity. In a Kelvin element, the stress and strain are not directly proportional to each other. Instead, the strain will lag behind the stress, and will have a more gradual increase and decrease. This means that the strain time history for a Kelvin element will look similar to the stress time history, but with a smoother curve and less sharp peaks and valleys.
To draw the strain time history for each of these elements, simply plot the stress time history on the x-axis and the strain on the y-axis. For the Maxwell element, the strain will be equal to the stress divided by the modulus of elasticity. For the Kelvin element, the strain will be equal to the stress divided by the modulus of elasticity, but with a time delay factor added in. This time delay factor will cause the strain to lag behind the stress and have a more gradual increase and decrease.
Learn more about Maxwell element:
https://brainly.com/question/30480107
#SPJ11