Molarity of acetic acid = 0.00083 mol/L. Therefore, the percent error between the experimental and theoretical pKa of acetic acid is: Percent error = (experimental pKa - 4.75)/4.75 x 100%
a. To calculate the molarity of acetic acid in vinegar, you need to convert 5% (by mass) acetic acid into moles. To do this, you will use the equation:
Moles of acetic acid = (mass of acetic acid/molar mass of acetic acid) x (density of vinegar)
We can assume that the density of vinegar is 1 g/ml. The molar mass of acetic acid is 60.05 g/mol. So, we can calculate the moles of acetic acid as follows:
Moles of acetic acid = (0.05 g/60.05 g/mol) x (1 g/ml) = 0.00083 mol
To calculate the molarity of acetic acid, we need to divide the number of moles of acetic acid by the volume of vinegar (in liters):
Molarity of acetic acid = 0.00083 mol/L
b. To calculate the pKa of acetic acid, you need to use the measured pH of vinegar. The pH of a solution can be related to the pKa of an acid using the equation:
pKa = pH + log ([A-]/[HA])
where [A-] is the concentration of the acid’s conjugate base and [HA] is the concentration of the acid itself. The pKa of acetic acid is 4.75. So, the equation above can be rearranged to calculate the concentration of the conjugate base, [A-]:
[A-] = 10^(pKa - pH) x [HA]
Therefore, we can calculate the pKa of acetic acid given the measured pH of vinegar and the molarity of acetic acid:
pKa = pH + log ([A-]/[HA]) = measured pH + log (10^(pKa - pH) x [HA]/[HA]) = measured pH + log (10^(4.75 - measured pH))
c. To calculate the percent error between the experimental and theoretical pKa of acetic acid, we can use the following equation:
Percent error = (experimental - theoretical)/theoretical x 100%
Therefore, the percent error between the experimental and theoretical pKa of acetic acid is:
Percent error = (experimental pKa - 4.75)/4.75 x 100%
Know more about percent error
https://brainly.com/question/28771966
#SPJ11
What is meant by the term optical activity why is it that only certain kinds of molecules are optically active? How do chemists measure the optical activity of molecules
The capacity of a substance to rotate the polarization plane of an incident light beam.
Why are only some types of molecules optically active?Chiral molecules are said to be optically active because they can spin the plane of polarisation in a different way by interacting with the electric field in a different way. Generally speaking, optical isomers are molecules that rotate light in different directions.
How is optical activity measured and what does it mean?A polarimeter is used to measure optical activity, which is a chiral molecule's capacity to rotate the plane of plane-polarized light. A grouping of these molecules' optical activity is a macroscopic characteristic that results from their interactions with light.
To know more about light beam visit:-
https://brainly.com/question/22268346
#SPJ1
In the laboratory, you are given two small chips of each of the unknown metals X,
Y, and Z, along with dropper bottles containing solutions of XC12 (aq) and ZC12
(aq). Describe an experimental strategy you could use to determine the relative
activities of X, Y, and Z. *
To determine the relative activities of X, Y, and Z, you could complete a galvanic cell experiment.
Start by combining a small chip of X and a small chip of Y in a beaker of distilled water, then connect the two chips with a copper wire. Next, place the two dropper bottles containing solutions of [tex]XC^{12}[/tex] (aq) and [tex]ZC^{12}[/tex] (aq) in a separate beaker of distilled water, then connect the two bottles with a copper wire. Finally, connect the two beakers with a copper wire, and measure the voltage created by the circuit. The greater the voltage generated, the greater the activity of the metal, meaning the metal with the highest voltage is the most active.
For more question on galvanic cell click on
https://brainly.com/question/25577710
#SPJ11
4. Your company currently uses a process with a similar cost of materials that has an average percent yield of 91 percent. If the average percent yield of this process is higher than that, this could save the company money. What is your recommendation to the company? Please support your recommendation using your data, calculations, and understanding of stoichiometry gathered from this lab.
Data Trial 1 Trial 2
Mass of empty crucible with lid 26. 692g 26. 690g
Mass of Mg metal, crucible, and lid 27. 096g 26. 999g
Mass of MgO, crucible, and lid 27. 352g 27. 197g
These calculations indicate that the process's typical percent yield is roughly 4.06%.
The balanced chemical formula for the reaction of magnesium and oxygen to produce magnesium oxide is 2Mg + O2 2MgO.
Trial 1: Mg mass is equal to (0.404 g) (27.096 g - 26.692 g).
Test 2: Mg mass equals (26.999 g - 26.690 g) = 0.309 g
Calculated yield of MgO in Trial 1 is equal to 2 x (0.404 g Mg) x (1 mol MgO/2 mol Mg) x (40.31 g MgO/1 mol MgO) = 16.28 g MgO.
Calculated yield of MgO in Trial 2 is equal to 2 x (0.309 g Mg) x (1 mol MgO/2 mol Mg) x (40.31 g MgO/1 mol MgO) = 12.44 g MgO.
Trial 1's actual MgO production was 27.352 g - 26.692 g, or 0.66 g MgO.
Trial 2's actual MgO production was equal to 0.507 g MgO (27.197 g - 26.690 g).
Trial 1: The percentage of MgO yield is calculated as (0.66 g MgO/16.28 g MgO) x 100% = 4.05%.
Trial 2: MgO yield as a percentage is (0.507 g MgO/12.44 g MgO) times 100%, or 4.07%.
Learn more about percent yield here:
https://brainly.com/question/2506978
#SPJ4
Using the balanced equation below,how many grams of sodiumthiosulfate would be required toproduce 64.3 g NaBr?AgBr + 2Na2S2O3 → Na3Ag(S203)2 + NaBr
Answer: 197.26 g Na2S2O3
Explanation:
64.3/103 (molar mass of NaBr) X 2 moles Na2S2O3 X 158 (molar mass of Na2S2O3.
Which type of reaction does this diagram represent?
A small ball heads toward a large circle labeled superscript 235 upper U. An arrow points to an irregular circle labeled superscript 236 upper U. Another arrow points to a starburst, partially overlaid by 2 blobs labeled superscript 92 upper K r and superscript 141 upper B a, and with 3 small balls heading away from the starburst.
nuclear fusion because nuclei combine to form a heavy nucleus
nuclear fission because an atom is splitting into two large fragments of comparable mass
nuclear fusion because a large amount of energy is being released
nuclear fission because the resulting products are not radioactive
Which one is the answer need this asap! and explanation please!
The diagram represents a nuclear fission reaction where a Uranium-235 nucleus absorbs a neutron, becomes unstable and splits into two fragments releasing energy and neutrons.
What is the difference between nuclear fission and nuclear fusion?Nuclear fission is the process of splitting an atomic nucleus into two or more smaller nuclei with the release of energy, while nuclear fusion is the process of combining two or more atomic nuclei into a larger nucleus with the release of energy.
How is energy released in a nuclear fission reaction?In a nuclear fission reaction, energy is released due to the conversion of a small amount of mass into a large amount of energy, in accordance with Einstein's famous equation E=mc^2. The release of energy occurs when the Uranium-235 nucleus splits into two fragments, releasing neutrons and gamma radiation in the process.
Learn more about nuclear fission here:
https://brainly.com/question/29141330
#SPJ1
13) If 20 liters of hydrogen gas are used, how many liters of nitrogen gas will be
needed for this reaction?
N₂ + 3H₂
2NH3
In this reaction, 20 liters of hydrogen gas must combine with 6.67 litres of nitrogen gas.
What is Nitrogen Gas?
According to the reaction's chemical equation, 1 mole of nitrogen (N2) interacts with 3 moles of hydrogen (H2) to create 2 moles of ammonia (NH3).
This indicates that the reaction's nitrogen:hydrogen ratio is 1:3.
We may set up a percentage using this ratio to calculate the quantity of nitrogen gas required to react with 20 litres of hydrogen gas:
1/3 = x/20
where x is the number of liters of nitrogen gas needed.
Solving for x, we get:
x = (1/3) × 20 = 6.67 liters
What is Hydrogen Gas?Methane, also known as natural gas, can be replaced with hydrogen, a clean fuel. It is the most prevalent chemical element and is thought to make about 75% of the universe's mass. Many hydrogen atoms can be found in water, plants, animals, and, of course, people here on earth.
To know more about Nitrogen Gas
https://brainly.com/question/11426882
#SPJ1
Before scientists publish their data and conclusions in scientific journals, they ask other experts in the same field to review the work and ensure that the results and conclusions are valid. What is this process called?
Before scientists publish their data and conclusions in scientific journals, they ask other experts in the same field to review the work and ensure that the results and conclusions are valid. This is known as Peer review.
Why is it necessary for scientists to publish their results in a peer-reviewed journal before their work is accepted seriously?Research project outcomes are evaluated by the scientific and medical communities after publication in peer-reviewed journals. It also offers guidelines so that additional researchers might carry out the experiment or expand on it to validate the findings.
What are scientific journals' peer-review procedures?Before a paper is published, its quality is evaluated through a process called peer review. To assist editors in deciding whether to publish a manuscript in their journal, independent researchers in the relevant field evaluate submitted manuscripts for originality, validity, and significance.
To know more about scientists visit-
https://brainly.com/question/17319855
#SPJ1
Calculate the mass of copper if 8029.0 J of copper is cooled from 155 oC to 23 oC.
The specific heat of copper is 0.385 J/g*oC.
Copper vessel weight is 155g, or 0.15 kg. Copper has a heat capacity of 8029 J kg 8 K 1. Heat capacity is calculated as follows: 0.15 kg x 8029 J, or 1204.35. The melting temperature of copper metal is 1083 degrees Celsius, and its specific heat is 0.385 J/g.
How do you calculate the mass of the a copper piece?To calculate an element's molarity, just use mean atomic mass listed in the standard table. The average atomic mass of a element copper, which appears just on periodic table as 63.55 AMU, can be used to calculate its molar mass.
How can you determine an element's mass?The number od protons and neutrons in an atom are simply added to determine its atomic mass of that particular atom. Consider an oxygen atom, for instance, which has 8 electrons, 8 protons, and 8 neutrons. To get the atomic structure, just add 8 protons & 8 neutrons.
To know more about metal visit:
https://brainly.com/question/29400906
#SPJ1
do each of the following depend on the amount of substance you have? explain. a. temperature b. thermal energy
Temperature and thermal energy are intrinsic properties that do not depend on the amount of substance you have. Both of these properties depend only on the state of the system and the conditions it is subjected to.
Let's understand this in detail:
1. Temperature measures the average kinetic energy of particles in a system. The temperature of a substance is determined by measuring how much energy is required to raise its temperature by a certain amount.
2. Thermal energy is the total energy of the particles in a system, including both kinetic and potential energy. The amount of thermal energy a substance has depends on the temperature and the number of particles in the system. It is an extrinsic property of a system that depends on the amount of substance present. However, it's worth noting that thermal energy can also be expressed on a per-molecule or per-atom basis as internal energy, which is an intrinsic property. Internal energy is the total energy stored in the particles of a system and is independent of the amount of substance present.
Learn more about intrinsic properties: Would extrinsic or intrinsic properties be more useful in identifying a substance? Why? https://brainly.com/question/28528346
#SPJ11
What is the formula for magnesium ion and iodine ion?
Answer:
MgI2
Explanation:
Mg ion is Mg2+ while I ion is I-
so the formula is MgI2
What best describes the change taking place in section BC of the graph?
a
The intermolecular bonds of the solid state are being broken as particles vibrate faster.
b
The intermolecular bonds of the liquid state are being broken as particles flow faster.
c
The temperature of the solid rises to increase the kinetic energy of its particles.
d
The temperature of the liquid rises to increase the kinetic energy of its particles.
The intermolecular bonds of the solid state are being broken as particles vibrate faster. The solid would be converted into liquid in the process.
What is the process of fusion of a solid?Fusion is the process of melting a solid into a liquid state, which occurs when heat energy is applied to the solid. The heat energy causes the molecules in the solid to vibrate more rapidly, which eventually leads to the breaking of the intermolecular bonds that hold the solid together. Once these bonds are broken, the solid turns into a liquid.
The solid is heated to a temperature at which the intermolecular bonds begin to break. The temperature at which this occurs depends on the material and its specific properties.
Learn more about fusion:https://brainly.com/question/14053504
#SPJ1
You and some friends decide to camp overnight at a beach How and when does a sea breeze form during your trip? How and when does a land breeze form during your trip? Draw a diagram of each type of breeze.
A sea breeze and a land breeze are both caused by differences in temperature and pressure between the land and sea.
What is Land breeze?During the day, the land heats up more quickly than the water, so the air above the land becomes warmer and less dense than the air above the sea. This causes a low-pressure zone to form over the land and a high-pressure zone to form over the sea. The cooler, denser air over the sea then moves inland to replace the rising warm air, creating a sea breeze.
What is sea breeze?During the night, the opposite occurs. The land cools more quickly than the sea, so the air above the land becomes cooler and denser than the air above the sea. This causes a high-pressure zone to form over the land and a low-pressure zone to form over the sea. The cooler, denser air over the land then moves offshore to replace the rising warm air, creating a land breeze.
To know more about temperature visit:-
brainly.com/question/29072206
#SPJ1
Consider these three changes in the possible distributions of six gaseous particles within three interconnected boxes. Part a which change has a positive δs
three changes in the possible distributions of six gaseous particles within three interconnected boxes is Change 1 and Change 3 have the particles more concentrated in one box, which creates less disorder and therefore a lower entropy. So, the correct answer is Change 2.
Three changes in the possible distributions of six gaseous particles within three interconnected boxes. Part a which change has a positive δs are :
Change 1: Six particles in one box, zero particles in the other two boxes
Change 2: Two particles in each box
Change 3: Four particles in one box, one particle in each of the other two boxes
The change with a positive δS is Change 2. This is because entropy, represented by δS, is a measure of the disorder or randomness of a system. In Change 2, the particles are more evenly distributed among the three boxes, which creates more disorder and therefore a higher entropy.
For more question on gaseous particles click on
https://brainly.com/question/24719118
#SPJ11
PROBABLE QUESTION WOULD BE
Consider these three changes in the possible distributions of six gaseous particles within three interconnected boxes. Part a which change has a positive δs (CHECK IMAGE)
How many grams of ammonia are necessary to form 9.09X^23 molecules of water?
Answer:
I forgot dude sorry so sorry
Answer:
255 grams of ammonia
Explanation:
To solve this problem, we need to use the balanced chemical equation for the reaction between ammonia and water:
NH3 + H2O → NH4+ + OH-
From this equation, we can see that one molecule of ammonia reacts with one molecule of water to produce one hydroxide ion (OH-) and one ammonium ion (NH4+). Therefore, we need the same number of molecules of ammonia as water to form the products.
So, if we have 9.09X^23 molecules of water, we need the same number of molecules of ammonia:
9.09X^23 molecules of NH3
To calculate the mass of ammonia required, we need to use the molar mass of ammonia, which is approximately 17 g/mol:
1 mol of NH3 = 17 g
To convert the number of molecules of NH3 to grams, we need to use Avogadro's number:
1 mol = 6.022 × 10^23 molecules
Therefore, the mass of ammonia required is:
9.09X^23 molecules of NH3 * (1 mol/6.022 × 10^23 molecules) * 17 g/mol
= 2.55 × 10^2 g or 255 grams (rounded to two significant figures)
So, we need 255 grams of ammonia to form 9.09X^23 molecules of water.
Which of the following is necessary to do a complete stoichiometric calculation?
a
Add the nuclear masses of the products.
b
Divide the nuclear masses of the reactants.
c
Write the complete balanced chemical equation.
d
Write the number of atoms in 1 mole of the product.
How to differ if a particle is a metal or a non metal
The properties of metals and nonmetals are different, and these differences can be used to differentiate between them. Here are some characteristics that can be used to identify whether a particle is a metal or a nonmetal:
Physical appearance: Generally, metals are shiny, lustrous, and have a metallic luster. Nonmetals, on the other hand, are typically dull, lack luster, and are not shiny.
Conductivity: Metals are good conductors of heat and electricity, while nonmetals are poor conductors.
Malleability and ductility: Metals are generally malleable and ductile, meaning they can be easily shaped or drawn into wires. Nonmetals, however, are brittle and not malleable or ductile.
Chemical properties: Metals tend to form positive ions, while nonmetals tend to form negative ions.
By examining these properties, it is possible to differentiate between metals and nonmetals.
To learn more about Malleability refer to:
brainly.com/question/1349130
#SPJ4
Two main types of elements with different characteristics are metals and nonmetals. By looking at a particle's physical and chemical characteristics, one may tell if it is a metal or nonmetal.
The following characteristics of metals and nonmetals can be used to distinguish them: Physical Characteristics Nonmetals are drab and lack a metallic shine, whereas metals are often brilliant and have one. Metals can usually be easily formed into various shapes because they are malleable and ductile. Nonmetals have a tendency to break readily and are fragile. Nonmetals are weak conductors of heat and electricity compared to metals. Except for mercury, metals are typically solid at room temperature. At room temperature, nonmetals might be solid, liquid, or gas.
learn more about metals here:
https://brainly.com/question/29404080
#SPJ4
The force that keeps a satellite in Earth’s orbit is directed where?
a.always toward the center of the Earth
b.always away from the center of Earth
c.either toward or away from Earth
d.always in the direction the satellite is moving
The fοrce that keeps a satellite in Earth’s οrbit is directed always away frοm the center οf Earth, sο, οptiοn (b) is cοrrect.
What is distance?Distance is an οbject's οverall mοvement, regardless οf directiοn. Distance refers tο the length οf an οbject's real rοute as a whοle. The displacement οf an οbject between twο pοints is defined as the straight line distance (shοrtest distance), measured frοm οne pοsitiοn tο the οther.
What is fοrce?A bοdy can change its state οf rest οr mοtiοn when an external fοrce acts οn it. It is directed and has a magnitude.
Therefοre, fοrce that keeps a satellite in Earth’s οrbit is directed always away frοm the center οf Earth, sο, οptiοn (b) is cοrrect.
Learn more about distance from the given link.
https://brainly.com/question/26550516
#SPJ1
What is the value for the activation energy of the reaction using the information in the table?
The activation energy is 101, 800J/mol
What is the activation energy?Activation energy is the minimum amount of energy required to start a chemical reaction by breaking the bonds of the reactant molecules. In other words, it is the energy barrier that must be overcome before a chemical reaction can occur.
Given that;
[tex]ln(k2/k1) = -Ea/R(1/T2 - 1/T1)\\ln(5 * 10^-4/4.9 * 10^-3) = -Ea/8.314(1/318 - 1/336)\\-2.28 = -2 * 10^-5 Ea\\Ea = 2.28/2 * 10^-5\\Ea = 101, 800J/mol[/tex]
Learn more about activation energy:https://brainly.com/question/28384644
#SPJ1
A metal can is able to withstand 3,800 kPa before it bursts. The gas in the can has a volume of 235 mL and the pressure is 110 kPa at 25°C. If the can is crushed to a volume of 8. 5 mL and the temperature does not change will it burst? What is the pressure of the gas in the can?
The pressure of a gas is directly proportional to its volume, according to Boyle's Law. this pressure is less than the maximum pressure that the can can withstand (3,800 kPa), the can will not burst.
Therefore, we can use the following equation to find the pressure of the gas in the can after it is crushed: P1V1 = P2V2 where P1 and V1 are the initial pressure and volume of the gas, and P2 and V2 are the final pressure and volume of the gas, respectively. Given that the initial volume (V1) of the gas in the can is 235 mL and the initial pressure (P1) is 110 kPa, we can substitute these values into the equation P1V1 = P2V2 110 kPa × 235 mL = P2 × 8.5 mL Solving for P2, we get: P2 = (110 kPa × 235 mL) / 8.5 mL P2 = 3,027 kPa Therefore, the pressure of the gas in the can after it is crushed to a volume of 8.5 mL is 3,027 kPa. Since this pressure is less than the maximum pressure that the can can withstand (3,800 kPa), the can will not burst.
learn more about pressure at :
https://brainly.com/question/12971272
#SPJ4
Determine the number of σ bonds and π bonds in each of the molecules. H 2 C = CCl 2 number of σ bonds: 1 number of π bonds: 1 HOOC − COOH number of σ bonds: 1 number of π bonds: 0 FHC = C = CHF number of σ bonds: number of π bonds: This molecule consists of a four membered carbon ring with two double bonds, one between carbons 1 and 2 and the other between carbons 3 and 4. A hydrogen is attached to each of the four carbons. Number of σ bonds: number of π bonds:
in H2C=CCl2: σ bonds = 3, π bonds = 1, in HOOC−COOH: π bonds = 0, σ bonds = 14, FHC=C=CHF: σ bonds= 7, π bonds = 2.
H2C=CCl2:
Number of σ bonds: 3 (2 C-H bonds and 1 C-Cl bond)
Number of π bonds: 1 (C=C double bond)
HOOC−COOH:
Number of σ bonds: 14 (8 C-H bonds, 4 C-O bonds, and 2 O-H bonds)
Number of π bonds: 0
FHC=C=CHF:
Number of σ bonds: 7 (4 C-H bonds, 2 C-F bonds, and 1 C-C bond)
Number of π bonds: 2 (2 C=C double bonds in the carbon ring)
In the molecule H2C=CCl2, there are three sigma bonds and one pi bond. The sigma bonds are formed due to the overlap of orbitals between the carbon atoms and hydrogen and chlorine atoms. The pi bond is formed by the sideways overlap of unhybridized p orbitals on the two carbon atoms in the double bond.
In the molecule HOOC−COOH, there are 14 sigma bonds and no pi bonds. The sigma bonds are formed due to the overlap of orbitals between the carbon, hydrogen, and oxygen atoms. This molecule is an example of a carboxylic acid, and the two carboxyl functional groups are connected by a carbon-carbon single bond.
learn more about Sigma bond here:
https://brainly.com/question/30000552
#SPJ4
if 30.0mL of 0.500 M KOH are needed to neutralize 10.0mL of HCl of unknown concentration, what is molarity of the H?
The molarity of the HCl solution is 1.50 M if 30.0 mL of 0.500 M KOH is required to neutralise 10.0 mL of unknown concentration of HCl.
The exact number of moles of KOH are required to neutralise 500 ml of 1.0 M HCl?Knowing the number of moles of solute present in 1 L (103 mL) of solution is known as knowing the molarity. Thus, 0.50 moles of potassium hydroxide are needed for a total neutralisation.
KOH + HCl → KCl + H2O
moles KOH = volume x molarity = 30.0 mL x 0.500 mol/L = 0.0150 mol
HCl molarity is calculated as moles / volume HCl.
We are given the volume of HCl as 10.0 mL, which is equivalent to 0.0100 L.
moles HCl = moles KOH = 0.0150 mol
molarity HCl = moles HCl / volume HCl = 0.0150 mol / 0.0100 L = 1.50 M
To know more about molarity visit:-
https://brainly.com/question/8732513
#SPJ1
Q. 3 What is the relative rate of diffusion of NH 3 compared to He? Does NH 3 effuse faster or
slower than He?
the relative rate of diffusion of NH3 compared to He is 0.485 and NH3 deffuse slower than He
NH3 has a molar mass of 17 g/mol and He has a molar mass of 4 g/mol. We can calculate the relative rate of diffusion of NH3 compared to He using Graham's law of diffusion as follows:
Relative rate of diffusion = (Molar mass of He / Molar mass of NH3) squared
Relative diffusion rate =
[tex] \sqrt{4 g/mol / 17 g/mol)} [/tex]
The relative rate of diffusion is equal to the square root of 0.235.
Diffusion rate relative = 0.485
As a result, the relative rate of diffusion of NH3 versus He is approximately 0.485.
As a result, NH3 diffuses more slowly than He. Similarly, because effusion rate is proportional to square root of molar mass, NH3 will effuse more slowly than He.
learn more about molar mass here:
https://brainly.com/question/22997914
#SPJ4
An earthquake happens along a line. Which of the subsequent isn't true about faults
A. It is found toward land
B. It is where fault cyclone starts
C. It will be found under the ocean
D. It is an opportunity within the Earth's crust
Answer: D.
Explanation: it is an opportunity within the Earth's crust.
find the molarity of a solution with 952 grams of ammonium carbonate are dissolved to make 1750 ml of solution
The molarity of a solution with 952 grams of ammonium carbonate dissolved to make 1750 ml of solution is: 0.54 mol/L.
The molarity of a solution can be calculated by dividing the amount of solute (in this case ammonium carbonate) by the volume of the solution. In this case, 952 grams of ammonium carbonate are dissolved in 1750 mL of solution. Therefore, the molarity of the solution can be calculated as follows:
Molarity = (952 g ammonium carbonate) / (1750 mL solution) = 0.54 mol/L
To calculate the molarity, first, we need to calculate the moles of ammonium carbonate. We can do this using the molar mass of ammonium carbonate, which is 53.49 g/mol. We divide the mass of ammonium carbonate by its molar mass to get the number of moles:
(952 g ammonium carbonate) / (53.49 g/mol) = 17.77 mol
Then, we divide this number by the volume of the solution (in liters):
(17.77 mol) / (1750 mL/1000 mL/L) = 0.54 mol/L
Therefore, the molarity of the solution is 0.54 mol/L.
To know more about molarity refer here:
https://brainly.com/question/16727614#
#SPJ11
Is this Correct also i dont know what the last one is? Chem work please.
Therefore, 8 moles of aluminum would require 12 moles of chlorine to react completely and produce 8 moles of aluminum chloride.
What is reaction?A reaction is a process that leads to the transformation of one set of chemical substances to another. In other words, a chemical reaction is the breaking of chemical bonds in reactants and the formation of new chemical bonds to create products. Chemical reactions involve the rearrangement of atoms and electrons, leading to the formation of new substances with different properties than the original substances.
Here,
The balanced equation is:
2 Al + 3 Cl2 → 2 AlCl3
a. According to the balanced equation, 2 moles of aluminum reacts with 3 moles of chlorine to produce 2 moles of aluminum chloride. Therefore, 4 moles of aluminum chloride would require:
4 moles AlCl3 x (3 moles Cl2 / 2 moles AlCl3) = 6 moles Cl2
So, 4 moles aluminum chloride is equivalent to 6 moles chlorine.
b. Similarly, according to the balanced equation, 2 moles of aluminum reacts with 2 moles of aluminum chloride. Therefore, 1 mole of aluminum chloride would require:
1 mole AlCl3 x (2 moles Al / 2 moles AlCl3) = 1 mole Al
So, 1 mole aluminum chloride is equivalent to 1 mole aluminum.
c. Finally, using the mole ratios from parts (a) and (b), we can determine the number of moles of chlorine that would be produced if 8 moles of aluminum reacted:
8 moles Al x (2 moles AlCl3 / 2 moles Al) x (3 moles Cl2 / 2 moles AlCl3) = 12 moles Cl2
To know more about reaction,
https://brainly.com/question/30564957
#SPJ1
Why is there no reaction between solid magnesium metal and aqueous sodium nitrate? Use this activity series to help you.
Answer:
Because magnesium cannot displace sodium from solutions.
How many grams of Na2S2O3, would be required to produce 64.3 g NaBr? 2AgBr + Na₂S₂O3 → Ag2S₂O3 + 2NaBr Na₂S₂O3 158.12 g/mol NaBr 102.89 g/mol 1 ?] g Na₂S₂O3 Mass Na₂S₂O, (g) : Enter
Taking into account the reaction stoichiometry, 49.41 grams of Na₂S₂O₃ is required to produce 64.3 g NaBr.
Reaction stoichiometryIn first place, the balanced reaction is:
2 AgBr + Na₂S₂O₃ → Ag₂S₂O₃ + 2 NaBr
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
AgBr: 2 molesNa₂S₂O₃: 1 moleAg₂S₂O₃: 1 moleNaBr: 2 molesThe molar mass of the compounds is:
AgBr: 187.76 g/moleNa₂S₂O₃: 158.12 g/moleAg₂S₂O₃: 327.86 g/moleNaBr: 102.89 g/moBy reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
AgBr: 2 moles ×187.76 g/mole= 375.52 gramsNa₂S₂O₃: 1 mole ×158.12 g/mole= 158.12 gramsAg₂S₂O₃: 1 mole ×327.86 g/mole= 327.86 gramsNaBr: 2 moles ×102.89 g/mole= 205.78 gramsMass of Na₂S₂O₃ requiredThe following rule of three can be applied: If by reaction stoichiometry 205.78 grams of NaBr are produced by 158.12 grams of Na₂S₂O₃, 64.3 grams of NaBr are produced by how much mass of Na₂S₂O₃?
mass of Na₂S₂O₃= (64.3 grams of NaBr× 158.12 grams of Na₂S₂O₃) ÷205.78 grams of NaBr
mass of Na₂S₂O₃= 49.41 grams
Finally, 49.41 grams of Na₂S₂O₃ is required.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
#SPJ1
A 50 lb weight (22,679 grams) made completely out of iron has rusted. How much rust, Fe2O3, in grams will it produce?
The mass of rust that will be produced would be 32,438 g or 32.44 kg.
Stoichiometric problemThe molecular weight of Fe2O3 is 159.69 g/mol.
The balanced equation for the rusting of iron is:
4Fe + 3O2 → 2Fe2O3
From the equation, 4 moles of iron react with 3 moles of oxygen to produce 2 moles of Fe2O3.
The weight of iron in 50 lb is:
50 lb = 22.68 kg = 22,680 g
One mole of Fe has a mass of 55.85 g, so 22,680 g of iron is:
22,680 g / 55.85 g/mol = 406.1 mol of Fe
From the balanced equation, 2 moles of Fe2O3 are produced for every 4 moles of Fe that reacts. So, the number of moles of Fe2O3 produced is:
(2/4) x 406.1 mol = 203.1 mol
The mass of Fe2O3 produced is:
203.1 mol x 159.69 g/mol = 32,438 g
Therefore, the weight of rust produced is 32,438 g or 32.44 kg.
More on stoichiometric problems can be found here: https://brainly.com/question/14465605
#SPJ1
fill in the blank from the image pls
AHe has
electrons.
Question 4
Lit has
electrons.
8,026
gn
protons,
protons,
么
))
MAR
2 pts
neutrons, and
3 pts
neutrons, and
Answer:
it has 2 protons 2 electrons and 2 neutrons
do you think that cyclohexane would behave similarly to water toward the charged rod? explain why or why not. be specific about the role that polarity plays in the interaction with the rod.
No, cyclohexane would not behave similarly to water toward the charged rod.
Let's understand this in detail:
1. The primary reason for this difference is the polarity of the two substances. Water is a polar molecule, while cyclohexane is non-polar.
2. Polarity plays a crucial role in interacting with the charged rod. Polar molecules, like water, have a separation of charges due to the difference in electronegativity between their constituent atoms, which leads to the formation of a dipole moment.
3. This dipole moment allows water molecules to align themselves and interact with the charged rod, causing them to be attracted or repelled based on the charge of the rod.
4. Contrastingly, cyclohexane, a non-polar molecule, has an even distribution of electrons and no dipole moment. Therefore, it does not have a charge separation and cannot align or interact with the charged rod in the same way as water molecules.
5. This lack of interaction with the charged rod means that cyclohexane will not behave similarly to water in this scenario.
Learn more about polarity: Polarity is related to? https://brainly.com/question/29300412
#SPJ11