Answer:
its 2 on ed I promise do not listen to the brainiest
Explanation:
Answer:
B)2
Explanation:
If the density of a substance is 2.18 g/mL, how would you find the density given that the mass is 0.987 kg and the volume is 4.52 x 102 mL?
Answer:
Explanation:
Convert mass in gms .. 987 gms
Density = mass/ volume
= 987/4.52 x102
= 2.18 g/mL
Which types of matter are made of atoms
a. Mixtures
b. Elements
C. Compounds
D. All of the above
Answer:
D all above yes I think it's all above
Answer: D
Explanation: All of the above.
Plz mark brainliest:)
Pioneer species like Lichens and Mosses inhabit an area after a major disturbance, such as a volcanic eruption. Over time, other species are found in the disturbed areas, and the number of pioneer species decreases. Why does the number of pioneer species get less?
Answer:
The number of pioneer species get less as the area has more soil to support complex plants and the competition decreases the role of pioneer species.
Explanation:
Pioneer species like Lichens and Mosses inhabit an area after a major disturbance, such as a volcanic eruption. However, with time the number of pioneer species decreases.
The number of pioneer species get less as the area has more soil to support complex plants and the competition decreases the role of pioneer species.
Homer notices that his shower is covered in a strange green slime. His friend Barney tells him that coconut juice will get rid of the green slime. Homer decides to check this out by spraying half of the shower with coconut juice. He sprays the other half of the shower with water. After 3 days of "treatment" there is no change in the appearance of the green
Answer:
This strange green slime is a colonization of fungi caused by the humidity of the bathrooms, which to be eradicated requires a non-specific antimicrobial such as sodium hypochlorite that generates an osmotic imbalance producing a fungicidal effect.
Explanation:
The fungi that appear in the form of slime at the microscopic level have many forms of colonization, by adding coconut milk it was assumed that this would generate an environment not suitable for their metabolism and reproduction but this did not happen, therefore they continued their reproduction.
Answer:
Explain?
Explanation:
Name for each compoud
1.CO
2.H2SO4
3CaCO3
4 H202
5NaF
32 N of Force. 37 N force. How strong is the net force and in which direction?
How many moles are in a sample of 2.39 x 10^23 atoms of sodium (Na)
Answer:
The answer is 0.4 molesExplanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\ [/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
[tex]n = \frac{2.39 \times {10}^{23} }{6.02 \times {10}^{23} } \\ = 0.39700996...[/tex]
We have the final answer as
0.4 molesHope this helps you
After lab, all of Darrel's friends looked at his data and laughed and laughed. They told him that he was 30.8% too low in the boiling point he had just recorded. He had recorded a boiling point of 50o C on his data sheet. What is the correct boiling point of the liquid he was working with in lab?
Answer:
100°
Explanation:
For a boiling point is it always 100°
ANSWER ASAP PLEASE!!
What determines how many of each ion is required for an ionic compounds?
please do not look up on google!!!!
Each ion has a single charge, one positive and one negative, so we need only one ion of each to balance the overall charge. When writing the ionic formula, we follow two additional conventions: (1) write the formula for the cation first and the formula for the anion next, but (2) do not write the charges on the ions.
challenges we will face terraforming Mars
When many earthquakes are studied, there is another common pattern that emerges: a "Shadow Zone". This is an area, for any earthquake, on the Earth where direct S-waves don't arrive at all and P waves are refracted. What do you think causes these P waves to be refracted? *
Answer:
Sudden decrease in the velocity at the boundary.
Explanation:
The shadow zone is the zone of the earth from angular distances of 104° to 140° from a known earthquake that does not directly receive any P waves. Now, this shadow zone occurs as a result of S waves getting stopped completely by the liquid core and the P waves being refracted by the liquid core.
From earlier seismic discoveries, this boundary which is the shadow zone that does not directly receive any P-waves was found to be due to the fact that the P-waves were refracted inwards as a result of the sudden decrease in velocity at the boundary.
What is the decomposition of 2LiCIO3
25 cm of liquid 'A' and 20 cm of liquid
'B' are mixed at 25°C and the volume of
solution was measured to be 44.8 cm3
then correct reaction is
(A) A Hmix = 0, solution shows
ideal
Answer:
The correct option is;
(B) [tex]\Delta H_{mix} < 0[/tex], solution shows negative deviation
Explanation:
The given parameters are;
The available volume of liquid A = 25 cm³
The available volume of liquid B = 20 cm³
The volume of the solution (mixture) = 44.8 cm³
Therefore, we have;
[tex]\Delta _{mix} V < 0[/tex]
Which is one of the prerequisite for the formation of negative deviation
When a non-ideal solution shows negative deviation according to Raoult's Law, we have;
[tex]\Delta _{mix} H < 0[/tex], we have more heat released due to new molecular interactions.
choose the letter that best describes the behavior of a substance during a phase change:
/A/ neither absorbs or releases energy
/B/ always absorbs energy
/C/ always releases energy
/D/ either absorbs or releases energy
Answer:
/D/ either absorbs or releases energy
Explanation:
During a phase change energy is either absorbed or released.
A phase change is a reversible process which occurs when a substance changes is its state from one form to another.
Phase changes are used to delineate physical changes.
A phase diagram provides a graphic representation of the change. The diagram can be 2 dimensional or 3 dimensional.stages of mitosis in order
Answer:
nucleus formed
prophase
metaphase
anaphase
telophase and cytokinesis
A train in Japan can travel 813.5 miles in 5 hours
Answer:
162.7miles/hr
Explanation:
Given parameters:
Distance covered by the train = 813.5miles
Time taken = 5hours
Unknown:
Speed of the train = ?
Solution:
Speed is a physical quantity.
It is mathematically expressed as;
Speed = [tex]\frac{distance}{time}[/tex]
So, input parameters and solve;
Speed = [tex]\frac{813.5}{5}[/tex] = 162.7miles/hr
Need help ASAP please
Answer:Melting can create steam, kind of like a nukeular plant exept no nukulear rods
What is the mass of an object with a density of 5.7 g/cm^3 and a volume of 48
cm^3? *
Answer:
273.6 g
Explanation:
mass =(density)(volume)
mass=(5.7g/cm^3 )(48 cm^3)
cancel out your cm^3 and your are left with grams
multiply (5.7g)(48)=273.6 g
The mass of an object with a density of 5.7 g/cm³ and a volume of 48 cm³ is 273.6 grams.
What is density?Density is defined as the degree to which a material is packed together.
It is also defined as a mass per unit volume of the substance.
Its SI unit is kilogram per cubic meter or gram per meter.
Density can be expressed as
Density = mass / volume
Mass = density x volume
As given, Density = 5.7 g/cm³
Volume = 48 cm³
So, Mass = 5.7 g/cm³ x 48 cm³
= 273.6 grams
Thus, the mass of an object with a density of 5.7 g/cm³ and a volume of 48 cm³ is 273.6 grams.
To learn more about density, refer to the link below:
https://brainly.com/question/15164682
#SPJ5
Not all protists use flagella or cilia to move. Give an example of another way protists move and identify the type of protist that uses that mode of movement.
Answer: One of the most striking features of many protist species is the presence of some type of locomotory organelle, easily visible under a light microscope. A few forms can move by gliding or floating, although the vast majority move by means of “whips” or small “hairs” known as flagella or cilia, respectively. (Those organelles give their names to informal groups—flagellates and ciliates—of protists.) A lesser number of protists employ pseudopodia. Those same organelles may be used in feeding as well.
Explanation:
Which describes the elements in a given group of the periodic table?
They decrease in atomic mass as you go down the column.
They increase sequentially in atomic number from top to bottom.
They are in the same family, with similar characteristics.
Their properties change according to a pattern as you go down the column.
Answer:
They are in the same family, with similar characteristics.
Explanation:
The elements in a given group of the periodic table are in the same family and with similar characteristics.
Vertical columns on the periodic table are referred to as a group or family. Elements having the same number of electrons in the outermost shell of their atoms are placed one another in vertical columns. Each resulting vertical column is a group or family. Elements in the same group exhibit similar chemical properties because of the same number of electrons in their atoms' valence shells.Which of the following is the correct model of C7H16?
A.
B.
C.
D.
Answer:
D
Explanation:
Option D gives the correct model of C7H16. From the option, one will discover that the model has 7 carbons in the backbone. If you count the attached hydrogen, you will discover that the hydrogen is 16 in total.
This model or skeletal structure of this element represents heptane. Heptane or n-heptane is known to be a straight-chain compound and an alkane. It's chemical formula can also be written as: H₃C(CH₂)₅CH₃ or C₇H₁₆.
This compound is known to be one of the main components of gasoline. It is known to be a volatile organic compound and a clear and colorless liquids with a petroleum-like odor.
Answer: D
Explanation: Just took the test
what is the name of CCI3
carbon trichlorine????
Carbon tetrachloride, also known by many other names (such as tetrachloromethane, also recognised by the IUPAC, carbon tet in the cleaning industry, Halon-104 in firefighting, and Refrigerant-10 in HVACR) is an organic compound with the chemical formula CCl4.
You are conducting an experiment with two very reactive substances. One will react with oxygen (O) and other substances in the air, and the other will react to metal in a container. What type of environment can you seal them in so they only react with each other?
Answer:
seal them in a glass container in an atmosphere of argon (Ar) gas
Explanation:
What is force and motion
Answer:
In physics, a force is any interaction that, when unopposed, will change the motion of an object. A force can cause an object with mass to change its velocity (which includes beginning moving from a state of rest), i.e., to accelerate. Force can also be described intuitively as a push or a pull.
lol
Volcanic belts form along
a.
islands in the Pacific Ocean.
b.
North American mountain ranges.
c.
the boundaries of Earth’s plates.
d.
the coast of Antarctica.
Please select the best answer from the choices provided
Why are biopharmaceuticals in high demand?
Answer:
the market is largely driven by the growing population, increasing burden of chronic disease, and rising inclination toward targeted therapy.
Explanation:
also, the huge demand of biopharmaceutical is facilitated by an accelerating focus in research and related investment.
What suprising result is explained using this model
Answer:
B. A few positive particles bounced back because they were pushed away from the positive center.
Explanation:
The result of the experiment conducted by Rutherford shows that a few positive particles bounced back because they were pushed away from the positive center.
This is the central theme of Rutherford's experiment on a thin gold foil.
In 1911, Rutherford performed the gold foil experiment that gave the modeling of the atomic structure a great boost. He bombarded a thin gold foil with alpha particles. He discovered that most of the alpha particles passed through the foil while a few of them were deflected back. This led him to postulate that an atom has a small positively charged center where nearly all the mass is concentrated.Does the use of lithium cause human health problems?
Answer:
Yes
Explanation:
Lithium can cause nausea, diarrhea, dizziness, change in heart rhythm, muscle weakness, fatigue, and a dazed feeling
Continued use of Lithium could mean fine tremor, frequent urination, and thirst
Source: Webmd.com
How does the valence electron configuration (entire last energy level configuration) relate to the group number on the Periodic Table? Use the shorthand notation in your discussion.
Answer:
The valence electron configuration determines the group to which an element belongs to.
Explanation:
The valence electron configuration of an atom of an element refers to the number of electrons in that atoms outermost shell.
The valence electron configuration is related to the group number of an element in that the number of electrons in the valence shell of an atom of an element determines the group to which an element belongs to. For example, all elements having one valence electron belong to group IA of the periodic table. Similarly, all elements having seven valence electrons belong to group VIIA of the periodic table.
This is because, since the reactivity of an element is related to its ability to either gain or lose a certain number of electrons in its valence shell, elements having same number of valence electrons have similar chemical properties.
How many atoms are in the following formula?
3Al2O3
Answer:
15 atoms total
Explanation:
2 Al atoms + 3 O atoms = 5 Al2O3 atoms
5 Al2O3 atoms * 3 = 15
another way to do it is:
2 Al atoms * 3 = 6 Al atoms
3 O atoms * 3 = 9 O atoms
6+9 =15 atoms total
The number of atoms in the given 3Al₂O₃ is 15 atoms.
What are atoms?Atoms are the smallest unit of every matter. It contains charged particles present inside the atoms. They are electrons, protons, and neutrons. Atoms are of four types, description, isotopes, radioactive, and ions.
These atoms are the ions, that are charged, and the charged ions make bonds with each other to form compounds. Aluminum oxide is a compound that is formed by combining aluminum and oxygen atoms.
The compound is 3Al₂O₃
This means there are three moles of aluminum, and three moles of oxygen.
2 Al atoms + 3 O atoms = 5 Al₂O₃ atoms
5 Al₂O₃ atoms x 3 = 15
The elaborative way is:
2 Al atoms x 3 = 6 Al atoms
3 O atoms x 3 = 9 O atoms
6 + 9 =15 atoms total
Thus, the number of atoms is 15 atoms.
To learn more about atoms, refer to the link:
https://brainly.com/question/25620560
#SPJ2