Differential weathering is when various geologic materials exposed to the same environmental conditions will weather differently depending on their composition. Therefore the correct option is option C.
Differential weathering is a process in which various geologic materials exposed to the same environmental conditions will weather differently depending on their composition.
This can result in the formation of unusual and distinctive landforms, such as the hoodoos in Bryce Canyon National Park, where harder and more resistant rock layers stand above softer, more easily weathered layers.
The differential weathering occurs because different rocks have different physical and chemical properties that affect how they respond to environmental forces such as wind, water, and temperature changes.Therefore the correct option is option C.
For such more question on environmental:
https://brainly.com/question/23946590
#SPJ11
How will foliation in continental metamorphic rocks formed during subduction be oriented?
A) perpendicular to the direction of plate movement
B) parallel to the direction of plate movement
C) oblique to the direction of plate movement
B) parallel to the direction of plate movement.
In the case of foliation in continental metamorphic rocks formed during subduction, the orientation will be:
Foliation is a term used to describe the alignment of minerals in metamorphic rocks, and it typically forms perpendicular to the direction of the maximum compressional stress applied during metamorphism. In subduction zones, the compressional stress is related to the movement of tectonic plates. Thus, the foliation will be oriented perpendicular to the direction of plate movement.
Foliation forms in metamorphic rocks when minerals are reoriented or recrystallized under directed pressure and high temperature. As pressure is applied, minerals with a platy or elongated shape, such as micas and amphiboles, align themselves perpendicular to the direction of maximum stress.
This creates a parallel arrangement of minerals, giving the rock a banded or layered appearance. The orientation of foliation can help determine the direction of applied stress during rock formation, as it is typically perpendicular to the direction of maximum stress.
Learn more about :
Foliation : brainly.com/question/31323478
#SPJ11
As the speed changes what did you notice about the molecules freedom of movement
Water turns from a liquid into a gas known as water vapour. In comparison to molecules in a liquid, gas molecules are more flexible. Gas can expand to fill its container because its molecules are free to move apart.
In the gas phase, a molecule can move, rotate, or vibrate in a variety of different ways. This is referred to as its molecular degrees of freedom. Translational, rotational, and vibrational degrees of freedom are the three different types that exist.
According to the Kinetic molecular theory, as the temperature rises, the energy of each water molecule increases, causing the molecules to move more swiftly. The hydrogen bonds that hold water molecules together begin to dissolve when you heat water to a high enough temperature, which causes the molecules to move too much and cause gas formation.
Learn more about water vapour:
https://brainly.com/question/26133468
#SPJ4
_____ Describe how an entire suite of silicate minerals form from a single basaltic magma as it cools and cryatalizes
Silicate minerals form from basaltic magma through a process called fractional crystallization. As basaltic magma cools and crystallizes, minerals with different compositions and melting points solidify at varying temperatures, creating a suite of silicate minerals.
Initially, basaltic magma contains a mix of elements such as silicon, oxygen, aluminum, iron, magnesium, and more. As the magma cools, the first minerals to crystallize are those with high melting points, like olivine and pyroxene. These minerals are rich in iron and magnesium and are called mafic minerals. As the cooling process continues, the remaining liquid magma becomes more enriched in elements such as aluminum and potassium. This leads to the formation of plagioclase feldspar, which has a lower melting point compared to the mafic minerals. Further cooling causes minerals such as potassium feldspar, quartz, and biotite to form, which are richer in silica and are known as felsic minerals. In this way, a single basaltic magma can produce an entire suite of silicate minerals as it cools and crystallizes. These minerals can eventually form different types of igneous rocks, such as gabbro, diorite, and granite, depending on their composition and the specific conditions during the cooling process. Understanding this process helps geologists study the Earth's crust and provides insight into the formation of various rock types and mineral resources.
Learn more about basaltic magma here
https://brainly.com/question/15185246
#SPJ11
When an object collides with a moon, the energy that forms the impact crater comes from () energy of the object. The size of the impact crater depends upon the () and () of the object.
The energy that forms the impact crater comes from the Kinetic Energy of the object. When an object collides with a moon, it releases an enormous amount of energy that creates an impact crater.
The size of the impact crater depends upon the mass and velocity of the object. The greater the mass and velocity of the object, the larger the impact crater will be. In detail, the kinetic energy of the object is transformed into heat and shock waves during the collision. This creates a powerful force that excavates the material and forms the crater. Additionally, the angle of impact, the composition of the object, and the surface of the moon can also affect the size and shape of the impact crater. Overall, the formation of impact craters is an important process that has shaped the surface of many celestial bodies in our solar system.
The size of the impact crater depends upon the mass and velocity of the object. Firstly, Understand that the energy responsible for the impact crater is kinetic energy, which is defined as the energy an object possesses due to its motion then Recognize that the size of the impact crater is influenced by the object's mass and velocity. Mass refers to the amount of matter in the object, while velocity is the speed at which the object is travelling in a specific direction.
and finally note that a larger mass or a higher velocity will generally result in a larger impact crater, as more kinetic energy is being transferred during the collision.
To know more about Kinetic Energy visit:
https://brainly.com/question/26472013
#SPJ11
About half of the ash produced by Mount St. Helens came from ______, and the other half was the result of ______.
About half of the ash produced by Mount St. Helens came from the vertical blast that occurred on May 18, 1980. This blast sent a plume of ash and gas straight up into the atmosphere, which then fell back down onto the surrounding area as ash.
The other half of the ash was the result of the pyroclastic flows that occurred during the eruption. These flows were composed of hot gas and ash that traveled down the sides of the mountain at high speeds, destroying everything in their path. As they moved, they picked up additional material from the ground, adding to the volume of ash that was ultimately ejected into the atmosphere. The eruption of Mount St. Helens was one of the most significant volcanic events in recent history, and it produced a staggering amount of ash and other materials that impacted the environment and communities in the surrounding area. While the ash from the eruption has largely settled, the effects of the eruption can still be seen in the landscape today, serving as a reminder of the power and unpredictability of natural disasters.
Learn more about Mount St. Helens here
https://brainly.com/question/13620918
#SPJ11
A container holds 100 atoms of an isotope. This isotope has a half-life of 1.5 months. How many atoms of the radioactive isotope will be in the container after 3 months?
A) 25 atoms
B) 33 atoms
C) 50 atoms
D) 100 atoms
The atoms of the radioactive isotope will be in the container after 3 months is C) 50 atoms. An isotope is a variation of an element that has a different number of neutrons in its nucleus.
Some isotopes are unstable and will decay over time, releasing energy and/or particles in the process. This is what we call a radioactive isotope.
The half-life of a radioactive isotope is the amount of time it takes for half of the atoms in a sample to decay. In this case, the half-life of the isotope is 1.5 months, meaning that after 1.5 months, 50 of the 100 atoms in the container will have decayed.
After another 1.5 months (a total of 3 months), another half of the remaining 50 atoms will have decayed, leaving only 25 atoms. However, since we started with 100 atoms, and only 50 have decayed, that means there are still 50 atoms of the radioactive isotope left in the container. Therefore, the answer is C) 50 atoms.
Learn more about half-life here:
brainly.com/question/24710827
#SPJ11
What does "-zoic" in the eras of the geologic time scale refer to?
A)Water
B)Rock
C)Life
D)Fossilization
C) Life. The term "-zoic" in the eras of the geologic time scale refers to life. The suffix is derived from the Greek word "zoe", which means life. In the context of geology, it is used to denote different time periods characterized by specific types of life forms, rock formations, and fossilization processes.
The "-zoic" in the eras of the geologic time scale refers to life. This suffix is used to indicate a period in Earth's history that is characterized by a particular type of life, such as the Paleozoic era (which is marked by the proliferation of marine life and the emergence of the first land plants and animals) or the Mesozoic era (which is known as the "Age of Dinosaurs"). Fossilization, on the other hand, refers to the process by which organic material is preserved in rock over time, leading to the creation of fossils.
Learn more about Fossilization here: brainly.com/question/31419516
#SPJ11
What does an igneous rock with a pyroclastic texture tell a geologist?
An igneous rock with a pyroclastic texture tells a geologist that it was formed through explosive volcanic activity. Pyroclastic texture refers to the fragmented and explosive nature of the volcanic eruption that led to the formation of the rock.
The rock is made up of ash, cinders, and other volcanic debris that were ejected into the atmosphere during the eruption and then settled and solidified into the rock form. This type of igneous rock provides valuable information to geologists about the history of the volcanic activity in the region. For example, the size and distribution of the fragments in the rock can indicate the intensity and duration of the eruption, while the mineral composition of the rock can help identify the source of the magma. Additionally, the presence of pyroclastic textures in a rock can also provide clues about the environmental conditions that existed during the eruption, such as the temperature, pressure, and the presence of water. Overall, studying igneous rocks with pyroclastic textures can help geologists better understand the geological history of a region and the volcanic activity that shaped it.
Learn more about igneous rock here
https://brainly.com/question/18297174
#SPJ11
which of following rock types does NOT involve dissolved gas in the magma?
a. tuff
b. pumice
c. scoria
d. diorite
e. vesicular basalt
The rock type that does NOT involve dissolved gas in the magma is diorite (option d). Diorite is an intrusive igneous rock that is formed from the slow cooling
solidification of magma deep underground. Unlike volcanic rocks such as tuff, pumice, scoria, and vesicular basalt,
It forms from the slow cooling and solidification of magma deep within the Earth's crust. Unlike the other rock types listed in the question, diorite does not involve dissolved gas in the magma. Tuff, pumice, scoria, and vesicular basalt are all formed from volcanic activity, which involves the rapid cooling and solidification of magma that has dissolved gas (usually water vapor) in it. As the magma rises to the surface and encounters lower pressure, the dissolved gas comes out of solution and forms bubbles, creating a porous or vesicular texture in the resulting rock.
Learn more about solidification here:
https://brainly.com/question/21278640
#SPJ11
which of the following is not correct for el nino event?a.during el nino events, convection is over the central pacificb.during el nino events, rising air is over the central pacificc.warm water is over the central pacific ocean during el nino eventd.during el nino events, rising air is over the western pacific
The appropriate response that is inapplicable to the El Nio occurrence is Rising air is present across the western Pacific during El Nio events. The best decision is Option D.
When an El Nio event occurs, surface waters in the eastern and central tropical Pacific warm, which may have an impact on air circulation. The area with the most convection and rising air moves eastward towards the central Pacific as a result of this warming.
Convection (option a), rising air (option b), and warm water (option c) are all present over the central Pacific during El Nio events. Therefore, for El Nio-related events, option (d) is untrue. Option D is the right choice as a result.
For such more question on Pacific:
https://brainly.com/question/10576035
#SPJ11
Which of these factors may significantly influence atmospheric temperature changes?
A. concentration of greenhouse gases,B. variations in solar radiance, C. amount of aerosis in the atmosphere, E. Earth's orbital and tilt variations
All of the factors listed (A, B, C, and E) can significantly influence atmospheric temperature changes.
A. Greenhouse gas concentration: The number of greenhouse gases, such as carbon dioxide, methane, and water vapor, in the atmosphere can trap heat and promote the greenhouse effect, raising atmospheric temperatures.
B. Solar radiation fluctuations: Changes in the amount of solar energy that enters the Earth's atmosphere, such as variations in solar radiation brought on by sunspot cycles or modifications in solar activity, can have an effect on atmospheric temperatures.
C. The number of aerosols in the atmosphere: Both natural and man-made processes can release aerosols into the atmosphere, such as sulfate and fine particulate matter. By diffusing and absorbing sunlight, these aerosols can alter the Earth's energy balance, which can have an impact on atmospheric temperatures.
E. Earth's orbital and tilt variations: Long-term changes in the Earth's orbital and tilt variations, such as Milankovitch cycles, can affect how much sunlight is received by various portions of the planet and how intensely it does so, which in turn can affect atmospheric temperatures.
All of these elements are crucial climate change drivers and have a big impact on how the atmosphere's temperature varies in various time frames, from short-term fluctuations to long-term trends.
To know more about the effects of atmospheric temperature changes:
https://brainly.com/question/2345783
The answer is ALL OF THESE (E)
The factors that may significantly influence atmospheric temperature changes include:
A. Concentration of greenhouse gases
B. Variations in solar radiance
C. Amount of aerosols in the atmosphere
D. Earth's orbital and tilt variations
All of these factors can have a significant impact on atmospheric temperature by either trapping heat, affecting the amount of sunlight reaching the Earth's surface, or altering the distribution of solar energy across the planet.
use your model to predict the relative positions of the earth, sun, and moon when the moon is full.
Based on the model of the relative positions of the Earth, Sun, and Moon, we can predict that during a full moon:
The Earth is located in between the Sun and the Moon.The Moon is on the opposite side of the Earth from the Sun.The Sun, Earth, and Moon are aligned in a straight line, with the Earth in the middle.This alignment causes the Sun's light to fully illuminate the side of the Moon that faces the Earth, resulting in a bright full moon visible from Earth.
It is important to note that this model is based on the relative positions of the Earth, Sun, and Moon, and does not take into account other factors that may affect the appearance of the full moon, such as atmospheric conditions or the location of the observer on Earth.
To know more about solar system refer to-
https://brainly.com/question/12075871
#SPJ11
Subduction zone metamorphism
A. All of the possible answers are correct.
B. is similar to contact metamorphism.
C. forms the metamorphic rock blueschist.
D. involves high temperatures and low pressure.
Subduction zone metamorphism forms the metamorphic rock blueschist. Option C is correct
Subduction zone metamorphism occurs at convergent plate boundaries where one tectonic plate is forced beneath another, resulting in high pressure and low temperature conditions. This type of metamorphism can lead to the formation of blueschist, a blue-colored metamorphic rock that forms under high pressure and low temperature conditions. Therefore, option C is correct. Option A is incorrect as it is too general, while option B and D are incorrect as they do not accurately describe subduction zone metamorphism. Blueschist is a type of metamorphic rock that forms under high-pressure, low-temperature conditions during subduction zone metamorphism. It typically has a blue color due to the presence of the mineral glaucophane, which forms in the presence of high-pressure, low-temperature conditions. Blueschist often forms in subduction zones where oceanic crust is being subducted beneath another plate. The high pressure and low temperature conditions necessary for blueschist formation are typically found at depths of 15 to 30 kilometers within the Earth's crust. Blueschist is an important rock type because it can provide important information about the tectonic history and evolution of an area.
Learn more about metamorphism here:
https://brainly.com/question/1100440
#SPJ11
The eruption of Mt. St. Helens in 1980
A. was triggered by a landslide on its northern flank.
B. produced lava flows that traveled at the speed of sound and flattened forests.
C. occurred without warning, killing 60 people.
D. was the largest volcanic eruption ever recorded.
The eruption of Mt. St. Helens in 1980 was triggered by a landslide on its northern flank. Option A is correct.
On May 18, 1980, a massive landslide on the northern flank of Mount St. Helens caused a violent eruption, sending a plume of ash and gas more than 15 miles into the atmosphere. The landslide was triggered by an earthquake that caused the north face of the mountain to collapse, which in turn released a massive explosion of hot gas, ash, and rock. The eruption of Mt. St. Helens was one of the most destructive volcanic events in U.S. history, causing widespread devastation to the surrounding area and killing 57 people. While the eruption did produce pyroclastic flows, which are fast-moving clouds of hot gas and ash that can flatten forests, they did not travel at the speed of sound. The eruption was also not the largest volcanic eruption ever recorded.
Learn more about flank here:
https://brainly.com/question/28586842
#SPJ11
Two minerals that are unlikely to coexist in the same igneous rock are what?
Two minerals that are unlikely to coexist in the same igneous rock are quartz and olivine. These minerals have different chemical compositions and form under different temperature and pressure conditions, making their simultaneous presence in a single igneous rock unlikely.
Two minerals that are unlikely to coexist in the same igneous rock are quartz and olivine. This is because quartz typically forms in cooler, more silica-rich environments, while olivine forms in hotter, more magnesium-rich environments. So, in most cases, these two minerals would not be found together in the same igneous rock, as the conditions for their formation are typically mutually exclusive.
Know more about minerals here:
https://brainly.com/question/13770820
#SPJ11
causes of summer monsoon
A trough, or downward fold, called a(n) _____ is formed when a rock is deformed through folding.
A trough, or downward fold, called a syncline, is formed when a rock is deformed through folding. This occurs when layers of rock are subject to compressive stress, causing them to bend and buckle.
As the rock layers are forced downward in the center of the fold, a trough or syncline is created. The rock layers on either side of the syncline curve upwards, forming an upward fold or anticline. The shape of the fold is dependent on the amount of stress and the type of rock involved in the deformation.
The formation of synclines and anticlines is an important aspect of structural geology and can provide insight into the history of the rocks and the forces that shaped them.
Learn more about anticline here:
brainly.com/question/2737818
#SPJ11
During the early Neolithic Era, people relied on domesticated animals to provide each of the following except
A hides for clothes
B. Labor to pull plows
C. Manure for the soil
D. Meat, cheese, and milk for food
Read the case study on the Magaliesberg Mountains in FIGURE 2.1 before answering the questions that follow. Resistant layer Lass resistant rock 2.1.1 A + 2.1.2 B The rocks of the Bushveld Igneous Complex contains the world's richest source of platinum group minerals, chromite and vanadium. The Magaliesberg Mountains Lie about 40 km north-west of Tswane. The Mountains are the Southern boundary of the Bushveld Igneous Complex. It formed over 2 000 million years ago. It is a huge saucer-shaped intrusion. Identify the structural landform depicted in FIGURE 2.1. Identify the slopes labelled A and B on the landform. Refer to F (1 x 1) (1) (2 x (2) 2.2.1 2.2.2
The structural landform that is shown in the text is an intrusive igneous landform, and it is known as a saucer-shaped intrusion.
What are the rock?Landforms refer to characteristics present on the surface of the Earth, comprising geographical elements like hills, gorges, flatlands or highlands.
According to the details given in the question, is identified as the Bushveld Igneous Complex, an intrusive igneous landform that emerged more than two billion years ago. The gigantic intrusion, shaped like a saucer, comprises the planet's most abundant reserves of chromite, vanadium, as well as that of platinum group minerals.
Learn more about rock from
https://brainly.com/question/26046551
#SPJ1
analyze the sedimentary rocks ni fgi. a6.3.1. below each photograph, describe the rock briefly, using your observations of its apparent composition (what ti is made of), texture (the size, shape, and arrangement of its parts), and anything else you notice that might help you to interpret the rock.
to always consider the context of the rock in terms of its environment and geological history when interpreting your observations.
1. Composition: Observe the rock and determine what materials it is made of. Common components include sand, silt, clay, organic matter, or mineral fragments. 2. Texture: Examine the size, shape, and arrangement of the components within the rock. Consider whether the rock has well-sorted or poorly-sorted particles, the grain size, and if the grains are angular or rounded. 3. Additional Observations: Note any other features of the rock that may help in interpretation, such as color, layering or bedding, presence of fossils, or any unique features that could provide insights into the rock's formation or depositional environment. Remember to always consider the context of the rock in terms of its environment and geological history when interpreting your observations.
Learn more about rock here:https://brainly.com/question/19930528
#SPJ11
Anyone who searches for an ore deposit is called a(n) ______________.
Anyone who searches for an ore deposit is called a prospector. A prospector is a person who explores the land to find valuable minerals, metals, or other geological resources.
Prospecting can involve various methods such as geological mapping, geophysical surveys, drilling, and sampling. The goal of a prospector is to locate a deposit that contains enough valuable material to justify the cost of mining and extraction. Prospecting can be a challenging and time-consuming process, requiring a lot of skill and experience. Prospectors must have a good understanding of geology, as well as the economic factors that determine the viability of a deposit. In addition, they must be able to navigate difficult terrain, work in remote locations, and deal with unpredictable weather conditions. Overall, prospecting is an important first step in the mining process. Without prospectors, we would not have access to many of the valuable resources that we rely on in our daily lives.
Learn more about prospector here
https://brainly.com/question/30368948
#SPJ11
If a rock undergoes folding and is compressed to form an upward arch, this is a(n) _____ type fold.
If a rock undergoes folding and is compressed to form an upward arch, this is a type of anticline fold.
Anticline folds are characterized by an upward arch of rock layers, formed when the layers are compressed and pushed together from both sides. The central axis of an anticline fold is usually oriented parallel to the direction of compression, and the layers of rock on either side of the axis dip away from the center of the fold.
As the layers are pushed together, they may also be deformed and bent, creating the folding patterns that can be observed in the rock. Overall, anticline folds are an important geological feature that can provide insights into the history and evolution of the Earth's crust.
Learn more about central axis here:
brainly.com/question/20426325
#SPJ11
Famine is one example of how volcanoes can have a(n) ___ effect on humans, by lowering agricultural production and killing livestock that humans depend upon for survival.
Volcanoes have the potential to cause devastating effects on humans, including famine. This is because volcanic eruptions can release ash and other materials that can damage crops and decrease agricultural production.
In addition, volcanic ash can contaminate water sources and cause illness in livestock, leading to the death of animals that humans rely on for food and other resources.The impact of a volcanic eruption on agriculture and livestock can be severe, especially in developing countries where these resources are crucial for survival. However, with proper preparedness and response measures, the impact of volcanic eruptions on agricultural and livestock systems can be mitigated. This includes developing strategies for protecting crops and animals, improving communication systems for early warning of potential eruptions, and ensuring that emergency food and water supplies are available in affected areas. Ultimately, a comprehensive approach to disaster management that includes consideration of the impacts of volcanic activity on agricultural and livestock systems can help to reduce the human impact of these events.
Learn more about humans here
https://brainly.com/question/24067944
#SPJ11
In recent years, global positioning system (GPS) stations and satellites have been used to closely monitor ______ for signs of volcanic activity.
In recent years, global positioning system (GPS) stations and satellites have been used to closely monitor ground deformation for signs of volcanic activity.
GPS stations and satellites have been employed in recent years to carefully monitor ground deformation for indications of volcanic activity.
These instruments can pick up even minute changes in the ground's surface, including elevation or subsidence, which may be a sign of magma movement underground.
In recent years, global positioning system (GPS) stations and satellites have been used to closely monitor ground deformation for signs of volcanic activity.
Scientists can gain a better understanding of a volcano's behaviour and perhaps even forecast an eruption by tracking these changes over time.
For such more question on volcanic:
https://brainly.com/question/1156480
#SPJ11
Answer:
1. drones
2. robots
3. cyber attacks
Explanation:
got it right on edge. 2023
Which ocean is associated with most tsunamis?
A) Pacific Ocean
B) Arctic Ocean
C) Indian Ocean
D) Atlantic Ocean
The Pacific Ocean is associated with most tsunamis.
The Pacific Ocean is commonly known as the "Ring of Fire" due to the presence of numerous underwater earthquakes and active volcanoes. This region is responsible for producing most of the world's tsunamis, as earthquakes and volcanic eruptions can generate powerful ocean waves that can travel thousands of miles across the ocean before reaching land.
In recent history, some of the most devastating tsunamis have occurred in the Pacific Ocean, including the 2004 Indian Ocean tsunami, the 2011 Tohoku earthquake and tsunami in Japan, and the 2018 Sulawesi earthquake and tsunami in Indonesia.
While tsunamis can occur in other oceans as well, the Pacific Ocean remains the most susceptible due to its high seismic activity.
Learn more about tsunamis here:
https://brainly.com/question/14782736
#SPJ11
Explain/provide examples of each of the effects of the Columbian Exchange listed
The Columbian Exchange refers to the exchange of plants, animals, diseases, and ideas between the Old World and the New World following Christopher Columbus's first voyage to the Americas in 1492.
The effects of this exchange were widespread and had significant impacts on both the Old and New Worlds. Here are some examples of the effects of the Columbian Exchange: Biological exchange: The exchange of plants and animals had a significant impact on agriculture and food production. For example, maize, potatoes, and tomatoes were introduced to Europe, while horses, cows, and pigs were introduced to the Americas. These new crops and animals greatly increased food production and helped feed growing populations. Disease exchange: The exchange of diseases had a devastating impact on the New World, as the native populations had no immunity to many of the diseases brought by Europeans. Diseases such as smallpox, measles, and influenza killed millions of people in the Americas. In contrast, there were few diseases in the New World that had a significant impact on Europeans.
Cultural exchange: The Columbian Exchange also led to the exchange of ideas, religions, and technologies. For example, Europeans introduced Christianity to the Americas, while Native Americans introduced new methods of agriculture and medicine to Europeans. Environmental change: The introduction of new plants and animals also had a significant impact on the environment. For example, the introduction of cattle and sheep to the Americas led to overgrazing, which contributed to soil erosion and desertification. In Europe, the introduction of American crops such as maize and potatoes led to population growth and urbanization. Overall, the Columbian Exchange had both positive and negative effects on both the Old and New Worlds. While it led to increased food production and the exchange of ideas and technologies, it also had devastating consequences for native populations in the Americas.
Learn more about Exchange here:
https://brainly.com/question/26407800
#SPJ11
What is one theory that explains the cause of ice ages?
Answer:
a chain reaction of positive feedbacks triggered by periodic changes in the Earth's orbit around the sun
Explanation:
In general, it is felt that ice ages are caused by a chain reaction of positive feedback triggered by periodic changes in the Earth's orbit around the Sun. These feedbacks, involving the spread of ice and the release of greenhouse gases, work in reverse to warm the Earth up again when the orbital cycle shifts back.
Using the data given in the text, calculate Venus's angular diameter, as seen by an observer on Earth, when the planet is (a) at its brightest, (b) at greatest elongation, and (c) at the most distant point in its
To calculate Venus's angular diameter, we can use the formula θ = 2arctan(d/2D), where θ is the angular diameter, d is the physical diameter, and D is the distance from Earth to Venus.
According to the text, Venus's physical diameter is 12,104 km and its average distance from Earth is 41 million km.
(a) At its brightest, Venus is at its closest distance to Earth, which is about 38 million km. Plugging these values into the formula, we get θ = 0.65 arcseconds.
(b) At greatest elongation, Venus is at a distance of about 100 million km from Earth. Using the same formula, we get θ = 0.24 arcseconds.
(c) At the most distant point in its orbit, Venus is about 261 million km away from Earth. The formula gives us θ = 0.09 arcseconds.
In summary, Venus's angular diameter varies depending on its distance from Earth. When it's closest to Earth, it appears largest, and when it's farthest away, it appears smallest.
To know more about Venus refer here:
https://brainly.com/question/29566394#
#SPJ11
the star alderamin has an apparent magnitude of 2.4 and an absolute magnitude of 1.4. the star merak has an apparent magnitude of 2.4 and absolute magnitude of 0.5. assuming that neither star has been dimmed by interstellar clouds, we can say for sure that merek is
The apparent magnitude of a star is its brightness as seen from Earth, while the absolute magnitude is its brightness if it were located at a standard distance of 10 parsecs (about 32.6 light years) away from Earth. Based on the given information, we can conclude that Merak is brighter than Alderamin because it has a smaller absolute magnitude (-0.5 compared to 1.4).
This means that if both stars were located at the same distance from Earth, Merak would appear brighter than Alderamin. However, since they have the same apparent magnitude of 2.4, we can assume that they are at different distances from Earth.
In fact, since Merak has a smaller absolute magnitude, it must be closer to Earth than Alderamin. This illustrates the usefulness of absolute magnitude in determining the true brightness of stars, regardless of their distance from Earth.
To know more about star mass refer here:
https://brainly.com/question/31393602?referrer=searchResults
#SPJ11
the process of abrasion, where rock and smaller sized sediment at the glacier's base scrapes at underlying bedrock, may lead to glacial _________
The process of abrasion, where rock and smaller sized sediment at the glacier's base scrapes at underlying bedrock, may lead to glacial erosion.
This is because the constant scraping and grinding of the glacier against the bedrock can slowly wear it down, carving out valleys, fjords, and other landforms in the process.
As the glacier moves forward, it can pick up and transport large amounts of sediment, further contributing to erosion.
Additionally, the meltwater that flows from the glacier can also cause erosion as it carries sediment and debris away from the glacier and deposits it elsewhere.
Overall, abrasion plays a significant role in shaping the landscapes of areas where glaciers are present, and its effects can be seen in the unique and dramatic landforms that are created through glacial erosion.
To know more about glacial erosion refer here:
https://brainly.com/question/13053372#
#SPJ11