The characteristics of the expression of the simple harmonic motion allows to find the results for the expression of the mass- block system are:
A) The constant Ces: C = xinit
B) The ocsntna S is: S = 0
C) The equation of the system is: x = xinit cos wt
D) If the reference system is at some extreme, the equation is:
[tex]L - x_{init} = x_{init} \ cos \ wt[/tex]
The simple harmonic movement is an oscillatory movement where the restoring force is proportional to the displacement, the general equation that describes this movement is indicated.
x = C cos wt + S sin wt
Where x is the displacement C and S are constants. W the angular velocity and t the time.
A) The initial position of the body occurs when the time is zero, t = 0
We substitute.
x = C cos 0 + S sin 0
[tex]x_{init}[/tex] = C
B) The velocity of the particle is defined.
[tex]v= \frac{dx}{dt} \\ v= C w \ sin \ wt - Sw \ cos \ wt[/tex]
The initial velocity occurred for time zero t = 0
v = - S w
It indicates that the initial velocity is zero, since the angular velocity must be different from zero, it implies that the constant is valid.
S = 0
C) The equation for the block remains.
x (t) = [tex]x_{init} \ cos \ wt[/tex]
D) In some cases it is measured with respect to another reference system, the most common are:
For maximum compression it is the zero of the system. The maximum extension is the zero of the system.
In these cases, the change that must be made is
x = [tex]L - x_{min}[/tex] t
we substitute
[tex]L - x_{init} = x_{init} \ cos \ wt[/tex]
L = [tex]x_{init}[/tex] (1 + cos wt)
In conclusion, using the characteristics of the expression of the simple harmonic motion we can find the results for the expression of the mass- block system are:
A) The constant Ces: C = xinit
B) The ocsntna S is: S = 0
C) The equation of the system is: x = xinit cos wt
D) If the reference system is at some extreme, the equation is:
[tex]L - x_{init} = x_{init} \ cos \ wt[/tex]
Learn more about simple harmonic motion here: brainly.com/question/17315536
please paraphrase this paragraph
As a conclusion we first learned what is Discrete Fourier Transform and
why is it very important in signal processing science as it helps us to convert the discrete signal from time domain into frequency domain and the inverse DFT does the opposite converting the signal from frequency domain back into time domain. We have also learned the difference between DFT and the FFT algorithm where the FFT is an efficient
algorithm created to simplify the DFT process as it is faster and more accurate. We also learned how to perform and implement this algorithm using Matlab,
Answer:
The importance of signal processing science as has been made clear. Since we now know that it help to convert discrete signal from time domain to frequency domain. Moreover, we are now aware of the difference in DF5 and FFT algorithms as well as the implementation in Matlab.
Why do you suppose Km values are so frequently standardized and published, drawing attention to the value of Vmax/2, rather than Vmax itself
Km values are standardized because half the Vmax (Vmax/2) is more informative than Vmax. This value (Km) can be used to calculate the affinity of the enzyme by a given substrate.
The Km (Michaelis constant) of the enzyme refers to the value in which the concentration of substrate is equal to half of its maximum velocity (Vmax/2).
This value (Km) is inversely proportional to the affinity of an enzyme by a given substrate.
An enzyme showing a high Km also exhibits a low affinity for its specific substrate, and thereby this enzyme requires a high concentration of the substrate to reach its maximum velocity (Vmax).
In consequence, the Km value is a more informative value than the maximum velocity (Vmax), which only indicates the concentration of an enzyme catalyzing a reaction under ideal conditions.
Learn more in:
https://brainly.com/question/5182881
Jack sits in the chair of a Ferris wheel that is rotating at a constant 0.150 rev/srev/s . As Jack passes through the highest point of his circular part, the upward force that the chair exerts on him is equal to one-fourth of his weight.
What is the radius of the circle in which Jack travels? Treat him as a point mass.
Answer:
Explanation:
At the top of the arc, 3/4 of the acceleration of gravity is use to supply the necessary centripetal acceleration.
0.75g = ω²R
R = 0.75g/ω²
R = 0.75(9.81) / (0.15 rev/s)(2π rad/rev)²
R = 8.283006...
R = 8.28 m
The center of mass of a 1600 kg car is midway between the wheels and 0.7 m above the ground. The wheels are 2.6 m apart. (a) What is the minimum acceleration A of the car so that the front wheels just begin to lift off the ground
Answer:
Explanation:
I guess we are ASSUMING that this is a rear wheel drive car as a front wheel drive car will never get the front wheel normal force to zero
If we consider it as a statics problem and choose our moment center carefully...say 0.7 m above the rear wheel to ground contact point.
Call the traction force at the rear wheels F
The normal force on the front wheels will be zero, so no moment generated by the front wheels.
Summing moments about our chosen point to zero
1600(9.8)[2.6 / 2] - F[0.7] = 0
F = 291,200
this force will create an acceleration of
a = F/m
a = 291200/1600
a = 182 m/s²
which is about 18.6 times gravity acceleration
For the ballistic missile aimed to achieve the maximum range of 9500 km, what is the maximum altitude reached in the trajectory
Explanation:
The range R of a projectile is given the equation
[tex]R = \dfrac{v_0^2}{g}\sin{2\theta}[/tex]
The maximum range is achieved when [tex]\theta = 45°[/tex] so our equation reduces to
[tex]R_{max} = \dfrac{v_0^2}{g}[/tex]
We can solve for the initial velocity [tex]v_0[/tex] as follows:
[tex]v_0^2 = gR_{max} \Rightarrow v_0 = \sqrt{gR_{max}}[/tex]
or
[tex]v_0 = \sqrt{(9.8\:\text{m/s}^2)(9.5×10^6\:\text{m})}[/tex]
[tex]\:\:\:\:\:\:\:=9.6×10^3\:\text{m/s}[/tex]
To find the maximum altitude H reached by the missile, we can use the equation
[tex]v_y^2 = v_{0y}^2 - 2gy = (v_0\sin{45°})^2 - 2gy[/tex]
At its maximum height H, [tex]v_y = 0[/tex] so we can write
[tex]0 = (v_0\sin{45°})^2 - 2gH[/tex]
or
[tex]H = \dfrac{(v_0\sin{45°})^2}{2g}[/tex]
[tex]\:\:\:\:\:\:= \dfrac{[(9.6×10^3\:\text{m/s})\sin{45°}]^2}{2(9.8\:\text{m/s}^2)}[/tex]
[tex]\:\:\:\:\:\:= 2.4×10^6\:\text{m}[/tex]
The control center of human body is * 1/1 heart
brain
liver
We have ________ sense organs * 1/1
6
4
5
Which energy we get by burning of fuels * 1/1
Solar
Heat
Light
Sources of energy that can be used again and again will never run out * 1/1 Non renewable energy Renewable energy Running water What is called structure that build on rivers to get electricity * 1/1 Dam Check dam Tunnel Which nutrients protect us from diseases * 1/1 Carbohydrate Vitamin and Mineral Protein When is the best time of the day to water your lawn * 1/1 Early morning and late evening Afternoon Night Which of these ways to wash the car saves the most water? * 1/1 Wash it in the driveway with the garden hose Drive it into the lake Take it through a car wash that recycles water Why do we keep food and vegetables in refrigerator? * 1/1
a man can jump 9meteres on the moon.how high can he jump on the earth.
Answer:
You can jump 1.5 feet on Earth.
Explanation:
Because the moons gravity is weaker that earth so it would be easier to jump further on the moon.
Which is the most famous book of the philosopher Alexis karpouzos? I think it is the ''Cosmology, philosophy and physics''.
Answer: Yes, the " Cosmology, philosophy and physics" is the most famous book of the philosopher, Alexis karpouzos. But and the other books are important. For example, the " The self-criticism of science", the "Universal conscilusness" and the "Non-duality".
Explanation:
What is the direction of the torque produced on the crankset by the 2-kg mass attached to the pedal bar
A Torque is a twisting force, or turning moment, it is a vector quantity with both magnitude and direction e.g Turning the handle of a cork-screw clockwise and then counterclockwise will advance the screw first inward and then outward By convention, counterclockwise torques are positive and clockwise torques are negative.
The direction is perpendicular to both the radius from the axis and to the force. It is conventional to choose it in the right hand rule direction along the axis of rotation.
Counterclockwise is the positive rotation direction and clockwise is the negative direction.
Learn more at:
https://brainly.com/question/18253139
A 1.1 kg ball drops vertically onto a floor, hitting with a speed of 23 m/s. It rebounds with an initial speed of 5.0 m/s. (a) What impulse acts on the ball during the contact
Hi there!
We know that:
I = Δp = m(vf - vi)
Plug in the given values. Remember to take into account direction ⇒ let the rebound velocity be positive and initial be negative.
I = 1.1(5 - (-23)) = 30.8 Ns
All circuits include
a battery, wires, and a switch.
an energy source, a resistor, and a battery.
a battery, a light bulb, and a switch.
an energy source, a load, and wires.
Answer:
a battery, wires, and a switch.
Explanation:
All circuits include?
plz answer the question.
Answer:
A. Determine the equation of constraints
What is a list of all the states of matter?
Answer:
3
Explanation:
state of matter are solid
liquid and
gases
Answer:
3
Explanation:
state of a matter are solid liquid and gas
A car with an initial position of 10.0 m
and an initial velocity of 16.0 m/s accelerates at an average rate of 0.50 m/s2 for 4.0 s. What is the car’s position after 4.0 s?
Answer:
78
Explanation:
x=xi+vi(t)+1/2a(t)^2
x=10+16(4)+1/2(0.50)(4)^2
x=74+4
x=78 m
Objects 1 and 2 attract each other with a gravitational force of 12 units. If the mass of Object 2 is tripled, then the new gravitational force will be _____ units.
Explanation:
Fgravity = G*(mass1*mass2)/D².
G is the gravitational constant, which has the same value throughout our universe.
D is the distance between the objects.
so, if you triple one of the masses, what does that do to our equation ?
Fgravitynew = G*(3*mass1*mass2)/D²
due to the commutative property of multiplication
Fgravitynew = 3* G*(mass1*mass2)/D² = 3* Fgravity
so, the right answer is 3×12 = 36 units.
two billiard balls moving along the same line hit each other head-on. each has a mass of 0.220 kg; one has an initial velocity of 1.84 m/s, the other an initial velocity of 0.530 m/s. if the collision is elastic, what are their final velocities? ignore friction.
Hi there!
Since the collision is elastic, we must also satisfy the following condition:
Ei = Ef, or:
KEi = KEf
Begin by writing an expression for momentum. (p = mv) Remember that one ball's direction is negative; in this instance, we can let the second ball be moving LEFT.
mv1 + mv2 = mvf1 + mvf2
0.220(1.84) + 0.220(-.530) = 0.220(vf1 + vf2)
0.2882/0.220 = vf1 + vf2
1.31 = vf1 + vf2
Now, we can express this as a conservation of energy:
1/2mv1² + 1/2mv2² = 1/2mvf1² + 1/2mvf2²
Plug in values and simplify:
0.403315 = 1/2m(vf1² + vf2²)
Simplify further:
3.6665 = vf1² + vf2²
Use the equation derived from momentum above and solve for one variable:
vf2 = 1.31 - vf1
Plug in this expression for vf2:
3.6665 = vf1² + (1.31 - vf1)²
Expand:
3.6665 = vf1² + 1.7161 - 2.62vf1 + vf1²
Simplify:
1.9504 = -2.62vf1 + 2vf1²
Solve for vf1 using a graphing calculator:
vf1 = -0.53 m/s or 1.84 m/s; we must figure out which one is correct.
Since v1 is heading to the right initially with a velocity of 1.84 m/s, we know that the ball's velocity could not have stayed the same in both magnitude and direction, so the final velocity must be -0.53 m/s.
Now, we can solve for the velocity of the other ball (initial of 0.53 m/s):
vf2 = 1.31 - (-0.53) = 1.84 m/s.
Now, you could have also made the connection that when two balls of the SAME MASS experience an ELASTIC collision, the velocities are simply "exchanged" from one to another. I just used this more "extensive" method to prove this.
An object is dropped from a vertical height of 1.89 m above the balcony level. What is the object’s speed when it is 2.20 m below the balcony level if 10.0% energy is lost due to the air resistance? Does it matter when to apply 10% loss before V calculations or after? [8.49m/s] [yes it does, 0.9Energy result in √0.9Velocity]
a.
The object's speed at 2.20 m below balcony level is 8.74 m/s
Let the balcony level be 0 m and the height above the balcony level be positive and height below the balcony level negative.
Using the principle of conservation of energy, the total energy at a vertical height of 1.89 m above the balcony level equals the total mechanical energy when the object is 2.20 m below the balcony level and
So, E = E'
U + K + f = U' + K' + f'
where U = initial potential energy at 1.89 m = mgh, K = initial kinetic energy at 1.89 m = 0 J(since it is released from rest), f = energy loss at 1.89 m = 0 J, U' = final potential energy at 2.20 m below balcony level = mgh', K = final kinetic energy at 2.20 m = 1/2mv², f' = energy loss at 1.89 m = 10%U = 0.10mgh(since 10% of the initial energy is lost).
So,
U + K + f = U' + K' + f'
mgh + 0 + 0 = mgh' + 1/2mv² + 0.10mgh
mgh = mgh' + 1/2mv² + 0.10mgh
Dividing through by m, we have
gh = gh' + 1/2v² + 0.10gh
So, gh - 0.10gh = gh' + 1/2v²
0.90gh = gh' + 1/2v²
1/2v² = 0.90gh - gh'
1/2v² = g(0.90h - h')
v² = 2g(0.90h - h')
Taking square-root of both sides, we have
v = √[2g(0.90h - h')]
where v = velocity of object at 2.20 m below balcony level, h = height above the balcony level = 1.89 m, h' = height below the balcony level = -2.20 m and g = acceleration due to gravity = 9.8 m/s²
Substituting the values of the variables into the equation, we have
v = √[2g(0.90h - h')]
v = √[2 × 9.8 m/s²{0.90 × 1.89 m - (-2.20 m)}]
v = √[2 × 9.8 m/s²(1.701 m + 2.20 m)]
v = √[2 × 9.8 m/s²(3.901 m)]
v = √[76.4596 m²/s²]
v = 8.74 m/s
So, the object's speed at 2.20 m below balcony level is 8.74 m/s
b.
Yes it does matter when we apply 10% loss before V calculations
We need to apply the 10 % loss before V calculations because this would give us a proper value for V since the energy is lost before V is obtained.
So, yes it does matter when we apply 10% loss before V calculations
Learn more about speed of a falling object here:
https://brainly.com/question/18732868
The car on this ramp starts from rest. When released, it
accelerates at a constant rate. It has an initial position of 12 cm
from the top of the ramp, and has an average velocity of 1.20 m/s
for a total of 1.80 s. Which is the correct final position of the car?
Answer:
Explanation:
s 0.12 + 1.20(1.80) = 2.28 m from the top.
A clothes dryer in a home draws a current of 10 amps when connected on a special 220-volts household circuit.what is the resistance of the dryer?
Answer:
22Ω
Explanation:
if V ⇒ voltage
I ⇒ current
R ⇒ resistance
V = IR
220 = 10 x R
220 / 10 = R
22 = R
What happens when the object is placed at F? Explain
your answer.
Answer:
Sample Response: No image will be formed because the rays will not converge to or diverge from a common point.
Explanation:
Someone with a force of 900 N does not float in a freshwater pool. To prevent them from sinking, 20 N must be applied in an upward fashion. What is their volume and average density?
Explanation:
The buoyant force [tex]F_B[/tex] is defined as
[tex]F_B = \rho_wgV[/tex]
where [tex]\rho_w[/tex] is the density of the displaced fluid (freshwater), g is the acceleration due to gravity and V is the volume of the submerged object. In the case of freshwater, its density is [tex]997\:\text{kg/m}^3.[/tex] Since the buoyant force is 20 N, we can solve for the volume of the displaced fluid:
[tex]F_B = \rho_wgV \Rightarrow V = \dfrac{F_B}{\rho_wg}[/tex]
Plugging in the values, we get
[tex]V = \dfrac{20\:\text{N}}{(997\:\text{kg/m}^3)(9.8\:\text{m/s}^2)}[/tex]
[tex]\:\:\:\:\:= 2.05×10^{-3}\:\text{m}^3[/tex]
Recall that the weight of an object in terms of its density and volume is given by
[tex]W = \rho gV[/tex]
Using the value for the volume above, we can solve for the density of the object as follows:
[tex]\rho = \dfrac{W}{gV} = \dfrac{900\:\text{N}}{(9.8\:\text{m/s}^2)(2.05×10^{-3}\:\text{m}^3)}[/tex]
[tex]\:\:\:\:\:= 44,798\:\text{kg/m}^3[/tex]
A rock is thrown off a cliff with a speed of 5 m/s downward. How far will it fall after 7 seconds have elapsed?
Free-fall Acceleration is -10 m/s^2
I also need the Formula
Answer:
Explanation:
s = s₀ + v₀t + ½at²
if the throw point is origin and UP the positive direction and ignoring air resistance.
s = 0 + (-5)(7) + ½(-10)(7²)
s = 0 - 35 - 245
s = - 280 m
If the penny is thrown horizontally at 25 m/s from the 170 meter building, how long will it take for the penny to hit the ground?
9514 1404 393
Answer:
about 5.89 seconds
Explanation:
The penny will hit the ground at the same time it would if it were simply dropped. The equation for the vertical motion is ...
h(t) = -4.9t^2 +170 . . . . . where 170 is the initial height in meters
h(t) = 0 when ...
4.9t^2 = 170
t = √(170/4.9) ≈ 5.89
The penny will hit the ground in about 5.89 seconds.
PLEASE HELP!
A 9kg particle is initially at rest at x=0. It is subject to a single force Fx (N) which varies with x (m) as shown in the
diagram
F
2
1
0
ББ by
x
- 1
1
-2
The kinetic energy of the particle when it is at x = 3 m is:
Hi there!
With a Force/Displacement curve, we must take the integral (area underneath the curve) to calculate the work done.
We know that:
W = ΔKE
Calculate the work by finding the area underneath the force curve from
x = 0 to 3 m:
We can use a trapezoid:
A = 1/2(3 + 2)(3) = 7.5 J
This is the amount of work done, and since the object starts from rest:
7.5J = KEf - KEi (0 J)
7.5J = KEf = 7.5 J
what does stimlus mean
Answer:
a thing or event that evokes a specific functional reaction in an organ or tissue.
or
a thing that rouses activity or energy in someone or something; a spur or incentive.
Just before it strikes the ground, what is the watermelon's kinetic energy?
Answer:
Answer: At its lowest point, the kinetic energy of a watermelon just as it touches the ground is zero if it does not touch anything on its way down.
Explanation:
This is because that upon having been dropped from a height, an object no longer has any kinetic energy at all. Kinetic energy transforms to gravitational potential energy during the fall and there's nothing left over for kinetic once you stop accelerating anymore. Fortunately, things don't stay still until they land very often! For example, if a person catches the fruit with his hands after some air resistance slows him down - making him more similar in speed to the lag of the trajectory - then he'll be able to share some of his saved up gravitational potential with that watermelon and do some
A tennis player strikes the tennis ball with an initial velocity of 44.7 m/s horizontally. The ball is initially 1.28 m above the ground and 12.9 m from the 0.914 m tall net. Does the tennis ball make it over the net?
Hi there!
We can begin by finding the total time taken for the ball to reach the net using the equation:
dₓ = vₓt
12.9 = 44.7t
12.9/44.7 = t = 0.289 s
Now, we can use the following equation to solve for displacement in the Y direction:
d = y₀ + vit + 1/2at²
There is no initial vertical velocity, so:
d = y₀ + 1/2at²
Plug in known values:
d = 1.28 + 1/2(-9.8)(0.289²)
d = 0.87m
Thus, since 0.87 m < 0.914 m, the tennis ball does NOT make it over the net.
Objects 1 and 2 attract each other with a gravitational force of 179 units. If the distance separating objects 1 and 2 is changed to four times the original value (i.e., quadrupled), then the new gravitational force will be ______ units.
Explanation:
Fgravity = G*(mass1*mass2)/D²
G is the gravitational constant throughout the universe.
D is the distance between the 2 objects.
the distance is now quadrupled.
Fgravitynew = G*(mass1*mass2)/(4D)² =
= G*(mass1*mass2)/(16D²) =
= (G*(mass1*mass2)/D²) / 16 = Fgravity/16
the new gravitational force will be 179/16 = 11.1875 units
A flywheel having constant angular acceleration requires 4.70 s to rotate through 164 rad . Its angular velocity at the end of this time is 101 rad/s . Find the angular velocity at the beginning of the 4.70 s interval. Find the angular acceleration of the flywheel.
Answer:
A) -31.2 rad/s
B) 28.1 rad/s^2
Explanation:
A 2 kg ball is rolling down a hill at a constant speed of 4 m/s. How much kinetic energy does the ball have?