Jack and Jill stand on the ice and push off each other. Jack's 64.3-kg body is propelled westward with a velocity of 2.19 m/s. What is the eastward velocity of Jill's 45.4-kg body?

The speed of waves on the slinky is 2.42 m/s.

The speed of a wave is the distance it travels in a given amount of time.

The speed of waves on the slinky can be calculated using the equation:

v=fλ

where v is the wave speed, f is the frequency, and λ is the wavelength).

Using the given values of f=4.4 Hz and λ=0.55 m, we can calculate the speed of the wave to be 2.42 m/s.

So, the wave is traveling at a speed of 2.42 m/s, which means that it will travel 2.42 meters in one second.

The frequency of the wave is 4.4 Hz, which means that the wave completes one cycle in 0.23 seconds. Since the wave is traveling at a speed of 2.42 m/s, this means that it will take 0.23 seconds for the wave to complete one cycle.

Therefore, the speed of waves on the slinky traveling with a frequency of 4.4 Hz and having a wavelength of 0.55m  is 2.42 m/s.

To know more about the speed of waves, refer here:

https://brainly.com/question/10715783#

#SPJ11

Among the four options listed here, time has the least impact on the potential energy or kinetic energy of an object. Thus, option 3 is the correct answer.

Potential energy is the energy an object has due to its position or state, and is dependent on the height of the object from the ground and its mass. Kinetic energy is the energy an object has due to its motion, and is dependent on its mass and speed.

While time is a factor that can affect an object's potential and kinetic energy, it is not directly related to these forms of energy. Time can affect the amount of potential energy an object has by allowing it to move to a higher or lower position, but it does not directly affect the energy itself. Similarly, time can affect the kinetic energy of an object by allowing it to move for a longer or shorter period, but it does not directly affect the energy itself.

Therefore, time has the least impact on the potential energy or kinetic energy of an object compared to mass, speed, and height from the ground.

To find out more about energies, visit:

https://brainly.com/question/11749818

#SPJ1

The given statement is false. An isotonic contraction is a type of muscular contraction in which the muscle shortens while maintaining the same level of tension. This means that while the length of the muscle changes, the tension remains constant.

What are isotonic contractions?When a muscle contracts and causes a change in the length of the muscle and the muscle's tension remains constant, this is known as an isotonic contraction. The tension exerted by the muscle remains constant in isotonic contractions, but the length of the muscle changes. Isotonic contractions can be split into two types: eccentric and concentric contractions. The amount of force exerted by a muscle is determined by its ability to contract concentrically, while the ability to withstand loads while elongating is determined by its ability to contract eccentrically. Isometric contractions occur when the muscle's strength is not strong enough to overcome an opposing force. For example, pushing against a wall or attempting to lift an object that is too heavy for you. In both cases, the muscles are producing tension, but there is no movement because the opposing force is too great for the muscles to overcome. Therefore, the given statement is false.

For more details about isotonic contraction, click on the below link:

https://brainly.com/question/25121637

#SPJ11

The gravitational force between two masses is inversely proportional to the square of the distance between them. This means that the two masses must be much closer together for the force to be 1.03 N. The masses 0.510 kg and 0.108 kg have to be 0.285 m apart in order for the gravitational force between them to have a magnitude of 1.03 N.

The equation for gravitational force is F=G*m1*m2/d^2, where G is the gravitational constant, m1 and m2 are the two masses, and d is the distance between them.

Assuming G=6.67*10^(-11) Nm^2/kg^2, m1=0.510 kg, and m2=0.108 kg, then d=0.285 m. This is the minimum distance between the two masses for the gravitational force between them to have a magnitude of 1.03 N.

Know more about gravitational force here:

https://brainly.com/question/12528243

#SPJ11

All of the given options produce an acceleration that are force pairs suggested in Question 5.

When a skier uses her ski poles to start moving downhill then the ski poles exert a backward force on the ground while the ground exerts a forward force on poles and produces acceleration.

Similarly in case B. when a boat propeller spins rapidly in the water the propeller exert a backward force on the water while the water exerts a forward force on propeller and produces acceleration.

In case C. when a baseball player hits a pitched ball with a bat the bat exert a backward force on the ball while the ball exerts a force away from bat and produces acceleration.

In case D. when a party balloon contains rapidly moving helium atoms the helium atoms exert an outward force on the balloon while the balloon exerts an inward force on helium atoms and produces acceleration.

To learn more about acceleration click here https://brainly.com/question/12550364

#SPJ1

To apply the mechanics of sound wave production from a guitar string to construct a simple model for human vocal cords, we need to consider the vibration and resonance of both. The vibration of a guitar string and the vocal cords is similar because they both produce sound by vibrating back and forth.

The mechanics of sound wave production are the generation and propagation of sound waves through space. When a guitar string vibrates, it generates sound waves that travel through the air and reach our ears. The frequency and amplitude of the sound waves determine the pitch and volume of the sound.

Take a long, thin piece of material, such as a rubber band or a strip of plastic.2. Stretch it taut between two points, such as two pencils or two pegs.3. Pluck the string with your finger and observe the vibration.4. Vary the tension and length of the string to produce different pitches.

Read more about sound :

https://brainly.com/question/1199084

#SPJ11

In dragging a table across a rough floor, the potential energy for friction depends on the coefficient of friction, normal force, and distance traveled by the table, hence option (a), (b), and (c) are correct.

In this case, the potential energy for friction would depend on the following quantities:

Coefficient of friction: The coefficient of friction between the table and the floor would determine how much force is required to move the table and hence, the potential energy for friction.

Normal force: The normal force acting on the table due to the weight of the table and any objects placed on it would also affect the potential energy for friction.

Distance moved: The distance the table is moved would determine the amount of work done against friction and hence, the potential energy for friction.

Surface area: The surface area in contact between the table and the floor could also affect the potential energy for friction.

Overall, the potential energy for friction depends on a combination of factors, including the properties of the surfaces in contact, the force required to move the object, and the distance moved.

Therefore correct options are (a), (b), and (c).

Suppose you were dragging a table across a rough floor. in this case, the potential energy for friction depends on which quantity or quantities? (choose all that apply)

a. The total distance the table travels.

c. The coefficient of friction between the table and the floor.

d. The normal force that the floor exerts on the table.

e. There is no potential energy for frictional forces.

Learn more about friction:

https://brainly.com/question/24338873

#SPJ11

Hence, 127.2 m3/s per second is the required water flow rate from the dam's crest.

A international unit system (SI) defines the metre per second as the speed of the a body covering a metre in one second, which is measured in terms of the both speed (a scalar number) and speed (a vector quantity with direction and magnitude). m/s, m/s1, m/s, or ms are the SI unit symbols.

Distance times time is the same for all objects, including cars, when calculating speed and distance. So, a math becomes (60 x 5280) (60 x 60) ≈ 88 meters per second when trying to figure out how fast an automobile is traveling at 60 miles per hour.

To know more about per second visit:

https://brainly.com/question/17125529

#SPJ1

In the longitudinal wave ,B represents the phenomenon of rarefaction. Rarefaction refers to the region of a sound wave where the pressure of the medium is lower than its normal value.

Rarefaction is a term used to describe a decrease in the density or pressure of a substance, such as a gas or liquid. In the context of sound waves, rarefaction refers to the region of a sound wave where the pressure of the medium is lower than its normal value, causing the particles of the medium to be spread further apart than usual.

Sound waves are composed of regions of compression and rarefaction that alternate in a regular pattern as the wave travels through a medium. In a compressional (longitudinal) sound wave, the particles of the medium are pushed together in regions of compression, while they are spread apart in regions of rarefaction. These changes in pressure and density cause the wave to propagate through the medium.

In general, rarefaction can occur in any medium, not just in sound waves. For example, in a gas, rarefaction can be caused by a decrease in pressure, temperature or density. In a liquid, rarefaction can be caused by a decrease in pressure or density. Rarefaction waves can be observed in many natural phenomena, such as atmospheric pressure waves, seismic waves, and waves on the surface of water.

To know more about rarefaction, visit:

https://brainly.com/question/8401754

#SPJ1

The general process by which a large diffuse cloud of gas turns into a star and surrounding planets are known as: star formation.

The Star Formation process starts with a giant molecular cloud of gas and dust, where the gravitational forces act on the cloud and it collapses under its own gravity. This collapse results in a disc-like structure, which is also known as a protoplanetary disc, and has the potential to form planets.

The center of the disc gets hotter and denser, and eventually, nuclear fusion begins, resulting in the formation of a star. The protoplanetary disc contains a lot of dust and gas, and as the temperature increases, some of the minerals and elements present in the dust start to melt and then solidify, eventually forming small planetesimals, which aggregate to form the larger planets.

As the planets move around in the disc, they can migrate inward and outward, and some can collide and merge with others, thus forming even larger planets.

The remaining gas and dust in the disc are eventually swept up by the planets or blown away by the star's radiation, and the planets settle into stable orbits. This is the general process by which a large diffuse cloud of gas turns into a star and surrounding planets.

To know more about star formationrefer here:

https://brainly.com/question/16118644#

#SPJ11

In the following question, among the conditions given, The peak vertical ground reaction force (not resultant force) from the beginning of the measurement through leaving the ground in your spreadsheet is the highest vertical force.

Hence The peak vertical ground reaction force (not resultant force) from the beginning of the measurement through leaving the ground in your spreadsheet is the highest vertical force that the ground exerts on your body during the time period in question. so then, in order To calculate this, you need to examine your spreadsheet and look for the highest vertical force value present in the data.

For more such questions on vertical ground

https://brainly.com/question/15576736

#SPJ11

Bohr developed an equation for calculating the energy levels of a hydrogen atom. Using this equation, the following can be determined:

The energy level of an electron

The angular momentum of an electron

The radius of the hydrogen atom's orbit

Around the nucleus of the hydrogen atom, the electrons move in circular orbits. Each of these orbits corresponds to a particular energy level.

Bohr's equation calculates these energy levels based on the electron's distance from the nucleus and its angular momentum.

Thus, by using Bohr's equation, we can determine the energy level of an electron, its angular momentum, and the radius of the hydrogen atom's orbit.

To know more about Bohr's Equation here :

https://brainly.com/question/17308813

#SPJ11

Answer:

The kinetic energy is more than half of its maximum energy

The major factors in explaining why some Jovian moons are more geologically active than terrestrial worlds of similar or larger sizes are the effects of tidal heating and the presence of a large planetary body providing gravitational forces.

The main factors geologically active than terrestrial worlds are also because:

Overall the combination of tidal forces, volatile materials, lack of atmospheric erosion, and different composition can all contribute to the greater geological activity seen in some Jovian moons compared to terrestrial worlds

To know more about the 'terrestrial world':

https://brainly.com/question/17210115

#SPJ11

The average mass of the skiers is 66.0 kg. The power output of the motor is 4.70 kw. The maximum speed at which the skiers can be towed is 4.21 m/s.

Since there are 10 skiers, the total mass is:

M = 10m = 10(66.0 kg) = 660.0 kg

The force exerted by the tow rope is:

F = Mg sin([tex]\theta[/tex])

F = (660.0 kg)(9.81 m/s^2) sin(8.5 degrees)

F = 1117.9 N

Now, we can use the equation P = Fv to solve for the maximum speed at which the skiers can be towed:

v = P/F

v = (4.70 kW)/(1117.9 N)

v = 4.21 m/s

Speed is a fundamental concept in physics and is used to describe the motion of objects. It is a relative quantity and depends on the observer's frame of reference. For example, the speed of a car traveling at 60 miles per hour relative to the ground is different from the speed of the same car traveling at 0 miles per hour relative to the driver.

Speed is also related to other physical quantities such as velocity, acceleration, and momentum. Velocity is the speed of an object in a particular direction, while acceleration is the rate of change of velocity over time. Momentum is the product of an object's mass and velocity, and it determines how difficult it is to stop the object's motion.

To learn more about Speed visit here:

brainly.com/question/28224010

#SPJ4

The centrifuge must rotate at approximately 54959 rpm to produce an acceleration of 115000 g's at a distance of 8.50 cm from the axis of rotation.

To solve this problem, we can use the formula for centrifugal acceleration:

a = (r * w^2) / g

where a is the desired acceleration in units of g's, r is the distance of the particle from the axis of rotation, w is the angular velocity of the centrifuge in radians per second, and g is the acceleration due to gravity (approximately 9.81 m/s^2).

First, we need to convert the distance from centimeters to meters:

r = 8.50 cm = 0.085 m

Next, we can rearrange the formula to solve for the angular velocity w:

w = sqrt((a * g) / r)

Substituting the given values, we get:

w = sqrt((115000 * 9.81) / 0.085)

w = 5758.6 radians per second

Finally, we can convert the angular velocity from radians per second to revolutions per minute (rpm):

1 revolution = 2π radians

1 minute = 60 seconds

w (in rpm) = (w / 2π) * 60

w (in rpm) = (5758.6 / (2π)) * 60

w (in rpm) ≈ 54959

Learn more about centrifugal acceleration at: https://brainly.com/question/79801

#SPJ11

A stone is dropped into a well. the sound of the splash is heard 3.00 s later. The depth of the well is: 510 m

A stone is dropped into a well and the sound of the splash is heard 3.00 s later. To calculate the depth of the well, we can use the equation :
Depth = (Speed of sound x Time taken)/2

where the Speed of sound is 340 m/s. Therefore, the depth of the well is calculated to be 510 m.


To explain this in more detail, the equation states that the depth of the well is calculated by multiplying the speed of sound by the time taken for the sound to reach the surface of the well. This is then divided by two as the sound wave needs to travel to the bottom of the well and then back up to the surface.

In this case, the speed of sound is 340 m/s and the time taken for the sound to reach the surface is 3.00 s, so the depth of the well is 510 m.

To know more about depth refer here:

https://brainly.com/question/13804949#

#SPJ11

Wave speed (S) decreases, wavelength (L) decreases, height (H) increases, and wave steepness ([tex]\frac{H}{L}[/tex]) increases when  the wave moves across shoaling water to break on the shore.

The distance a wave travels in a given amount of time, such as the number of meters per second, is referred to as its wave speed. The equation Speed = Wavelength x Frequency relates wave speed to wavelength and frequency. When the wavelength and frequency are known, this equation can be used to calculate wave speed.

to know more about wave speed , visit ;

brainly.com/question/10715783

#SPJ1

The intensity of the sound wave at a fixed distance from the speaker vibrating at 2.57 kHz and maintaining a constant displacement amplitude is 2.25 W/m².

The intensity of a sound wave is directly proportional to the square of its frequency. Therefore, if the frequency of the speaker increases from 1.4 kHz to 2.57 kHz while maintaining a constant displacement amplitude, the intensity of the sound wave will increase by a factor of (2.57 kHz / 1.4 kHz)² = 3.29.

Thus, the new intensity of the sound wave will be 3.29 times the original intensity of 0.683 W/m², which gives us:

New intensity = 3.29 x 0.683 W/m² = 2.25 W/m²

Therefore, the intensity of the sound wave at a fixed distance from the speaker vibrating at 2.57 kHz and maintaining a constant displacement amplitude is 2.25 W/m².

For more questions like Intensity click the link below:

https://brainly.com/question/28448844

#SPJ11

Answer: C) 3M/2

Explanation:

rotational equilibrium at center pivot

mg(R) + Mg(Rcos60°) – 2Mg(R) = 0.

so cos60° = ½  meaning r 3M/2

A wheel of radius r and negligible mass is mounted on a horizontal frictionless axle so that the wheel is in a vertical plane. The value of m in terms of i is m = 2i * r.

The value of m in terms of m, we can use the condition for static equilibrium which states that the sum of all the forces acting on the system must be zero, and the sum of all the torques must also be zero.
Considering the forces acting on the system, we can see that there are only two: the weight of the objects and the tension in the string that connects them to the wheel. Since the system is in static equilibrium, the tension must be equal to the weight of the objects.
Next, let's consider the torques acting on the system. The torques due to weights of the objects are balanced by the torques due to their distances from the axis of rotation. However, the torque due to the tension in the string is not balanced and produces a net torque on the system.
We can calculate the torque due to the tension in the string by multiplying the tension by the radius of the wheel. The torque due to each object can be calculated by multiplying its weight by its distance from the axis of rotation. Since the system is in static equilibrium, the net torque must be zero, which gives us the following equation:
Tension x Radius = (2im) x 2r + m x r - im x r
Simplifying this equation, we get:
Tension x Radius = 4imr + mr - imr
Tension = (5im + m) / r
Since we know that the tension is equal to the weight of the objects, we can equate the tension to the sum of the weights and solve for m:
(5im + m) / r = 5im + m + 2im
m/r = 2im
m = 2i * r
Therefore, the value of m in terms of i is m = 2i * r.

For more such questions on vertical plane

brainly.com/question/30257698

#SPJ11

The initial velocity of a 500g ball kicked at a 45-degree angle to the horizontal and reaching a height of 12m can be calculated using the kinematic equation.

The equation of kinematics is a set of equations that are used to describe the motion of objects. They relate to displacement, velocity, acceleration, and time. Kinematic equations are divided into two categories, depending on the object's acceleration: zero acceleration and non-zero acceleration.

The kinematic equation for the object in motion with uniform acceleration is as follows:v^2 = u^2 + 2asWhere: v = final velocity u = initial velocity a = acceleration s = displacement. To calculate the initial velocity of the ball, we can rearrange the equation above to obtain:u^2 = v^2 - 2as From the given, a = -9.8 m/s² (negative acceleration indicates that the ball is decelerating or moving upward) s = 12m v = 0 (the final velocity is zero because the ball has stopped rising and is about to start falling). We'll use these values to calculate the initial velocity of the ball.u² = (0)² - 2(-9.8)(12)u² = 235.2u = sqrt(235.2)u = 15.33 m/s.

Therefore, the initial velocity of the ball is approximately 15.33 m/s.

Read more about velocity :

https://brainly.com/question/80295

#SPJ11

Perspiration dries on a person's skin. The correct answer is option B.

Vaporization is the process by which a liquid changes into a gas or vapor, and perspiration is a liquid that is secreted by sweat glands in the skin. When perspiration dries on a person's skin, it is evaporating and changing into a gas due to the heat energy from the person's body. This is an example of the physical change of state from a liquid to a gas through vaporization. The other options do not involve a change of state from a liquid to a gas, and instead involve other processes such as condensation. Hence option B  is the correct answer .

To know more about vaporization, here

brainly.com/question/30078883

#SPJ4

The initial speed given to the rock was approximately 100.96 m/s.

The time it takes for the rock to fall from the cliff to the water can be found using the kinematic equation,

h = 1/2gt^2

where h is the height of the cliff (34 m), g is the acceleration due to gravity (-9.81 m/s^2), and t is the time it takes for the rock to fall. Solving for t,

t = sqrt(2h/g) = sqrt(2 * 34 / 9.81) = 2.15 s

The horizontal velocity of the rock can be found using the equation,

v = d/t

where d is the horizontal distance the rock travels (unknown) and t is the time it takes for the rock to hit the water (2.78 s). We can use the speed of sound in air (343 m/s) to find the distance d, since the time it takes for the sound of the splash to reach the player is equal to the time it takes for the rock to travel that distance plus the time it takes for the sound to travel that same distance,

2.78 s = t + d/343

Solving for d,

d = (2.78 - t) * 343 = (2.78 - 2.15) * 343 = 217.11 m

Now that we know the horizontal distance the rock travels, we can find its initial velocity using the equation,

v = d/t = 217.11/2.15 = 100.96 m/s

To know more about speed, here

brainly.com/question/30622344

#SPJ4

When a ball is thrown at an upward angle, the vertical and horizontal components of velocity change in different ways. The vertical component of velocity decreases to a certain point before increasing again due to gravity. However, the horizontal component of velocity remains constant throughout the motion of the ball.

When a ball is tossed at an upward angle, the velocity has two components; vertical and horizontal components. The horizontal component is unaffected since there is no force acting on it.

The vertical component is influenced by the gravitational force acting on the ball. As the ball goes up, the vertical component of velocity decreases to zero. The maximum point is reached when the ball's velocity is zero. At this point, the ball stops going up and starts going down. As the ball falls, the vertical component of velocity increases in the opposite direction to the gravitational force acting on it.

Therefore, the vertical component of velocity changes as the ball is tossed at an upward angle. It increases, then decreases to zero at the top of its trajectory, and then increases again as the ball falls back to the ground. The horizontal component of velocity is constant throughout the motion of the ball because there is no force acting on it.

Hence, when a ball is tossed at an upward angle, the vertical and horizontal components of velocity change in different ways.

To know more about the components of velocity, refer here:

https://brainly.com/question/14431896#

#SPJ11

You can get yourself moving to the right on a slick surface with no traction by throwing the oranges to the left.

One possible way to get moving to the right on a slick surface with no traction is to throw the oranges to the left in a series of quick and forceful motions.

According to Newton's third law of motion, every action has an equal and opposite reaction. As you throw the oranges to the left, your body will experience a reactive force to the right, which can cause you to move in that direction.

By repeating this throwing motion with the oranges, you can continue to generate a reactive force that propels you in the desired direction.

More on Newton's third law can be found here: https://brainly.com/question/29768600

#SPJ1

The actual mechanical advantage of the system would be 0.573.

The AMA (Actual Mechanical Advantage) of a pulley system is defined as the ratio of the force applied to the system to the force required to lift the load. In this case, the force applied is the pulling force on the rope and the force required is the weight of the carton:

AMA = force applied / force required

To calculate the force required, we need to use the weight formula:

force required = weight = mass x gravity

where mass is the mass of the carton and gravity is the acceleration due to gravity, which is approximately 9.81 m/s^2.

mass = weight / gravity = 225 N / 9.81 m/s^2 ≈ 22.9 kg

force required = 22.9 kg x 9.81 m/s^2 ≈ 225 N

Now we can calculate the AMA:

AMA = force applied / force required = 129 N / 225 N = 0.573

Therefore, the AMA of the pulley system is approximately 0.573.

More on mechanical advantages can be found here: https://brainly.com/question/16617083

#SPJ1

The energy consumption per hour of the heater is 9 kJ/hour and the energy consumption per hour of the electric motor is 3 kJ/hour.

Let's denote the energy consumption per hour of the heater as "h" and the energy consumption per hour of the electric motor as "m".

From the first piece of information, we can set up the equation:

2h + 4m = 25 (equation 1)

Similarly, from the second piece of information, we can set up another equation:

3h + 2m = 18 (equation 2)

We now have two equations with two unknowns, which we can solve using algebraic methods. Multiplying equation 2 by 2 and subtracting it from equation 1 multiplied by 3, we get:

(3h + 6m) - 2(3h + 2m) = 25(3) - 18(2)

Simplifying this expression, we get:

h = 9

Substituting this value of h into equation 2, we get:

3(9) + 2m = 18

Simplifying this expression, we get:

m = 3

Learn more about energy consumption here: https://brainly.com/question/27438014

#SPJ1

If one object has twice as much mass as another object, it also has twice as much inertia. The correct answer is "inertia".

Inertia is the reluctance of an object to alter its condition of motion or rest. The more massive an object is, the more difficult it is to move. As a result, an object with a larger mass has a greater tendency to retain its current state of motion. This trait of an object is referred to as inertia.

The mass of an object has an impact on its inertia. The more mass an object has, the greater its inertia is. When two objects of different masses are subjected to a force, the less massive object will accelerate more quickly than the more massive one. This is the result of the inertia of the more massive object.

Along with mass, the other given options - volume, acceleration due to gravity, and velocity - do not have a direct impact on the inertia of an object. Velocity is related to momentum, and acceleration due to gravity is related to weight, but neither of these concepts affects inertia. Hence, the correct option is inertia.

Learn more about inertia at https://brainly.com/question/1140505

#SPJ11

The acceleration of the two blocks is g/4.

Tension force in the left section of the string is 5/4 Mg

Tension force in the right section of the string is 3/4 Mg

Angular acceleration of the pulley is 0.

a. The acceleration of the two blocks can be found by applying Newton's second law to each block. For Block A, the force equation is:

T - Mg = Ma

where T is the tension force in the string, M is the mass of Block A, g is the acceleration due to gravity, and a is the acceleration of Block A. For Block B, the force equation is:

3Mg - T = 3Ma

where T is the tension force in the string and a is the acceleration of Block B. Since the string is assumed to be light and inextensible, the tension force in both sections of the string is the same.

The two equations can be solved simultaneously to obtain the acceleration: a = g/4

b. To find the tension force in the left section of the string, we can use the force equation for Block A:

T - Mg = Ma

Substituting the value of acceleration we obtained in part a:

T = 5/4 Mg

c. To find the tension force in the right section of the string, we can use the force equation for Block B:

3Mg - T = 3Ma

Substituting the value of acceleration we obtained in part a, and the value of T we obtained in part bt:

T = 3/4 Mg

d. To find the angular acceleration of the pulley, we can use the torque equation:

Iα = Στ

where I is the moment of inertia of the pulley, α is the angular acceleration, and Στ is the net torque acting on the pulley.

The tension force in the string exerts a torque on the pulley, given by:

τ = TR

where R is the radius of the pulley. Since the tension force is the same on both sides of the pulley, the net torque is zero. Thus, we have:

Iα = 0 which implies that the angular acceleration of the pulley is zero.

Learn more on angular acceleration here: https://brainly.com/question/25129606

#SPJ1

The following statement is true about this circuit: option (A) The equivalent resistance of the circuit is the algebraic sum of all resistors.

This means that the total resistance of the circuit is equal to the sum of the individual resistances of each resistor. The total voltage on this combination is an algebraic sum of voltages on each resistor. This means that the total voltage of the circuit is equal to the sum of the voltages across each individual resistor.

The currents through all resistors are the same. This means that the total current that flows through the circuit is the same as the current that flows through each individual resistor.

To summarize, in a series circuit the equivalent resistance, total voltage, and current are equal to the algebraic sum of all the individual resistances, voltages, and currents respectively.  

To know more about resistance refer here:

https://brainly.com/question/11431009#

#SPJ11