Kiran swims z laps in the pool. Clare swims 18 laps, which is 95
times as many laps as Kiran. How many laps did Kiran swim?

The percentage of the original area of wetlands currently left in the United States is approximately 50%. So, the correct

option is 50% (option 3).

Percentages are a way of expressing a proportion or a fraction as a part of 100. It is denoted by the symbol "%".

According to the United States Environmental Protection Agency (EPA), it is estimated that about 50% of the original

wetlands in the contiguous United States have been lost since the 1600s due to human activities such as agriculture,

development, and urbanization. Therefore, the correct answer to the question is 50%.

for such more questions on percentages

https://brainly.com/question/24877689

#SPJ11

The percentage of the original area of wetlands currently left in the United States is approximately 50%.

Wetlands are regions of land where the soil is continually or intermittently soaked with water. Wetlands have a particular hydrology, soil, and vegetation mix that results in specialised ecosystems that offer a variety of ecological functions.

There are many different types of habitats where wetlands can be found, such as coastal locations, interior regions, and high-altitude mountain regions. They come in a variety of shapes, such as marshes, swamps, bogs, fens, and estuaries, and can be freshwater, brackish, or saline.

Wetlands are significant for several reasons. For species, such as migrating birds, amphibians, and fish, they offer crucial habitats. They also aid in removing contaminants from water, lessen the effects of flooding, and give people access to recreational activities. Wetlands are crucial for carbon sequestration as well.
Based on the information provided, the question is asking for the approximate percentage of the original area of wetlands currently left in the United States. The answer is approximately 50%.

Learn more about wetlands here:

https://brainly.com/question/30010590

#SPJ11

The goal of the data analysis stage is to figure out how information is currently flowing and why it isn't flowing properly. The statement is True.

The basic purpose of data analysis is to obtain meaningful insights and information from data by examining it. While knowing how information progresses is an important part of this process, the ultimate goal is to get a better knowledge of the data itself, as well as any patterns or correlations that may exist within it.

The process of troubleshooting and problem-solving is more directly tied to determining why information is not flowing properly. This may entail examining the data to discover any abnormalities, mistakes, or inconsistencies that may be interfering with information flow. Once these concerns have been recognized, efforts may be made to fix them and enhance information flow.

Therefore, the statement is true, the goal of the data analysis stage is to figure out how information is currently flowing and why it isn't flowing properly.

Learn more about Data Analysis:

https://brainly.com/question/29214006

#SPJ4

TRUE. In the data analysis step, the focus is on examining and evaluating data to identify patterns, trends, and insights. The goal is to pinpoint any issues or inefficiencies in the way information flows and to determine the root cause of these problems.

By analyzing the data, organizations can gain a better understanding of their processes and identify areas for improvement.
 In the data analysis step, the goal is to examine and understand the current flow of information. This involves analyzing the data to identify patterns, trends, and any potential issues. By pinpointing the reasons why the information is not flowing properly, you can then work towards implementing solutions to improve the efficiency and effectiveness of the data management process.

To learn more about Analysis - brainly.com/question/29926939

#SPJ11

Given statement: The rule of thumb for estimating the time of completion is 1.5 times what you originally think it will be.

Given statement is True.

The reason for this rule of thumb is that tasks often take longer than initially estimated due to unforeseen challenges, dependencies, and other factors that can cause delays.

By estimating the time of completion as 1.5 times the original estimate, you are accounting for these potential delays and allowing for a more realistic timeline.

This rule of thumb is not a hard and fast rule, and there will be cases where tasks take less or more time than 1.5 times the original estimate. However, it can be a helpful guideline for project planning and resource allocation, as it helps to ensure that sufficient time and resources are allocated to complete tasks within a realistic timeframe.

For similar question on estimating.

https://brainly.com/question/597381

#SPJ11

The radius of the water bottle which is in cylindrical shape is approximately 2.12 cm.

A cylinder is a three-dimensional shape that consists of two congruent, parallel circular bases that are connected by a curved lateral surface. The lateral surface of the cylinder is formed by a rectangle that is wrapped around the circular bases.

A cylinder can be thought of as a circular prism, where the bases are circles and the lateral surface is curved. The height of a cylinder is the perpendicular distance between the two bases, and the radius is the distance from the center of the base to the edge of the circular base.

The formula for the volume of a cylinder is V = πr^2h, where V is the volume, r is the radius, and h is the height. We can rearrange this formula to solve for the radius:

r = √(V/πh)

Substituting the given values, we have:

r = √(150/π(8.9))

r ≈ 2.12 cm (rounded to two decimal places)

Therefore, the radius of the water bottle is approximately 2.12 cm.

To know more about the Cylinder visit:

brainly.com/question/15891031

#SPJ1

The best center of the speed of the last 10 pitches thrown by a pitcher is the mean

From the question, we have the following parameters that can be used in our computation:

{90, 92, 85, 88, 94, 86, 93, 90, 88, 95}

The possible measure of centers are

In this case, we use the mean

This is because the data values do not have any outlier present in them

Hence, the center is the mean

Read mroe about measure of center at

https://brainly.com/question/17631693

#SPJ1

The estimated regression equation for the given data is y = -30.7 + 3.409x

To develop an estimated regression equation for the given data, we need to use the method of least squares.

The formula for the slope of the regression line is given by:

b = ∑(xi - x)(yi - y) / ∑(xi - x)²

where xi and yi are the individual values of the two variables, x and y are their respective means.

The formula for the intercept of the regression line is given by:

a = y - b × x

where a is the intercept and b is the slope.

Using the given data, we can calculate the values of x, y, b, and a as follows

x = (6 + 11 + 15 + 18 + 20) / 5 = 14

y = (7 + 9 + 12 + 21 + 30) / 5 = 15.8

∑(xi - x)(yi - y) = (6 - 14)(7 - 15.8) + (11 - 14)(9 - 15.8) + (15 - 14)(12 - 15.8) + (18 - 14)(21 - 15.8) + (20 - 14)(30 - 15.8) = 306.8

∑(xi - x)² = (6 - 14)² + (11 - 14)² + (15 - 14)² + (18 - 14)² + (20 - 14)² = 90

b = ∑(xi - x)(yi - y) / ∑(xi - x)² = 306.8 / 90 = 3.409

a = y - b × x = 15.8 - 3.409 × 14 = -30.7

Learn more about regression equation here

brainly.com/question/14184702

#SPJ4

The given question is incomplete, the complete question is:

Given are data for two variables, x and y. Develop an estimated regression equation for these data.

The scientist used 0.786 liters of the liquid for the experiment.

Unit conversion is the process of converting a quantity expressed in one unit of measurement to an equivalent quantity expressed in a different unit of measurement.

To convert between different units of measurement, we need to use conversion factors, which relate to the two units.

In this case, the conversion factor is 1 liter = 1000 milliliters, which allows us to convert from milliliters to liters by dividing by 1000.

Here we have

A scientist used 786 millimeters  

To convert milliliters to liters, we need to divide by 1000 since there are 1000 milliliters in one liter.

So, to convert 786 milliliters to liters, we divide by 1000:

786 milliliters ÷ 1000 = 0.786 liters

Therefore,

The scientist used 0.786 liters of the liquid for the experiment.

Learn more about Unit conversion at

https://brainly.com/question/19420601

#SPJ1

Complete Question:

A scientist used 786 milliliters of a liquid for an experiment. How many liters of the liquid did the scientist use for this experiment?

The expression that represents the total price of buying g pounds of grapes, b pounds of bananas, and p pounds of pears is Total cost = $2.19g + $0.59b + $1.49p

In this case, we need to use the given prices per pound of each fruit to calculate the total cost of purchasing a certain amount of each fruit. We can do this by multiplying the price per pound by the number of pounds of each fruit we want to buy, and then adding up these values.

So, to create the expression, we can start by using the given prices to calculate the cost of each fruit:

Grapes: $2.19/pound

Bananas: $0.59/pound

Pears: $1.49/pound

Next, we can use the variables g, b, and p to represent the number of pounds of each fruit we want to buy. We then multiply each price by its respective variable to get the cost of each type of fruit:

Cost of grapes: $2.19/g x g = $2.19g

Cost of bananas: $0.59/b x b = $0.59b

Cost of pears: $1.49/p x p = $1.49p

Finally, we can add up the costs of all three types of fruit to get the total cost:

Total cost = $2.19g + $0.59b + $1.49p

To know more about expression here

https://brainly.com/question/14083225

#SPJ4

The model have 4 degrees of freedom if a regression model has a sample of 30 observations using a dependent variable, 3 independent variables, and a constant.

In a linear regression model, the degrees of freedom for the model are calculated as the number of independent variables plus one (for the constant or intercept term). Therefore, in this case, since the model has 3 independent variables and a constant, the degrees of freedom for the model would be 3 + 1 = 4.

The degrees of freedom for the model represent the number of parameters estimated from the data to build the model. These parameters are the coefficients or weights of the independent variables and the constant term.

The degrees of freedom for the model are used to calculate the F-statistic, which is a measure of the overall significance of the regression model. The F-statistic is calculated as the ratio of the explained variance to the unexplained variance of the model, and it is compared to the F-distribution with degrees of freedom (k, n-k-1), where k is the number of independent variables and n is the sample size.

To know more about regression model here

https://brainly.com/question/16972231

#SPJ4

The distance of the base of the tower and the airplane is 348.5 ft,  and the right option is 4. 348.5 ft.

Distance is the length between two points.

To calculate the distance of the base of the tower and the airplane, we use the formula below.

Formula:

Where:

From the diagram,

Given:

SUbstitute these values into equation 1 and solve for A

Hence, the right option is 4. 348.5 ft.

Learn more about Distance here: https://brainly.com/question/26046491

#SPJ1

Answer:

To determine which ratio is proportional to 80:60, we need to simplify the ratio by dividing both terms by their greatest common factor. In this case, the greatest common factor of 80 and 60 is 20, so:

80/20 = 4

60/20 = 3

Therefore, the simplified ratio is 4:3.

Now we can compare this ratio to the given options to see which one is proportional to 4:3:

16:15 is not proportional

16:12 is proportional (since 16/4 = 4 and 12/3 = 4)

18:15 is not proportional

18:12 is proportional (since 18/3 = 6 and 12/2 = 6)

Therefore, the ratio that is proportional to 80:60 is 16:12.

The value of C of is 49/4

Completing the square is a technique for converting a quadratic polynomial of the form to the form for some values of h and k. In other words, completing the square places a perfect square trinomial inside of a quadratic expression.

10k²+7k+C , to find the value of c that will make the expression a perfect square we divide b by 2 and Square it.

Since b = 7

therefore c =( b/2)²

c = (7/2)² = 49/4

therefore the value of C is 49/4.

The expression can now be written as;

10k²+7k +49/4

and it can be simplified as;

40k²+28k +49

learn more about completing the square from

https://brainly.com/question/13981588

#SPJ1

Answer:  the answer is A. 14.

Step-by-step explanation: In each trial of the reenactment, Scott chooses one card from the stack and records its digit. Based on the given data, a digit of or 1 speaks to a objective scored, and a digit of 2 through 9 speaks to a missed endeavor.

Out of the 5 endeavors per amusement, on the off chance that Scott scores precisely 2 objectives, it implies he missed 3 endeavors. Subsequently, the likelihood of this occasion can be calculated as:

P(exactly 2 objectives) = (0.2)²(0.8)³ = 0.008192

This likelihood can be utilized to discover the anticipated number of diversions in which Scott scores precisely 2 objectives, by duplicating it by the overall number of diversions reenacted:

Anticipated number of recreations = P(exactly 2 objectives) × Add up to number of recreations = 0.008192 × 84 ≈ 0.68

Adjusting to the closest entire number, we get that Scott is anticipated to score precisely 2 objectives in 1 diversion out of the 84 recreated diversions.

The equation (x + 6)^2 + (y + 4)^2 = 36 is in the standard form of the equation of a circle:

(x - h)^2 + (y - k)^2 = r^2

where (h, k) is the center of the circle, and r is the radius of the circle. Comparing this with the given equation, we see that the center of the circle is (-6, -4), and the radius of the circle is 6.

Therefore, the signal is located at the point (-6, -4), which is the center of the circle. This is the point from which the radio signal is transmitted.

The range of the signal is the distance from the center of the circle to any point on the circumference of the circle, which is equal to the radius of the circle.

In this case, the radius is 6, which means that the range of the signal is 6 units in all directions from the center. This means that any receiver within 6 units of the center can pick up the radio signal transmitted from this source.

More on equation of circles can be found here: https://brainly.com/question/23799314

#SPJ1

The explanation of how to convert a general form equation to a standard form equation is given below:

Let's first look at how to convert a general form equation to a standard form equation. Given a general form equation:

x^2 + y^2 + Dx + Ey + F = 0

Complete the square for both x and y:

a. Divide the coefficients D and E by 2, and square the results. Let's call these values Cx and Cy:

Cx = (D/2)^2

Cy = (E/2)^2

b. Add and subtract Cx and Cy on both sides of the equation:

x^2 + Dx + Cx + y^2 + Ey + Cy = -F + Cx + Cy

Rearrange the equation to form the standard form equation:

a. Group the x and y terms and rewrite as perfect squares:

(x + D/2)^2 + (y + E/2)^2 = -F + Cx + Cy

b. Now, compare this to the standard form equation:

(x - h)^2 + (y - k)^2 = r^2

c. Identify the values of h, k, and r:

h = -D/2

k = -E/2

r^2 = -F + Cx + Cy

Now let's see how to convert a standard form equation to a general form equation. Given a standard form equation:

(x - h)^2 + (y - k)^2 = r^2

Expand the squares:

(x^2 - 2hx + h^2) + (y^2 - 2ky + k^2) = r^2

Rearrange the equation to form the general form equation:

x^2 + y^2 - 2hx - 2ky + h^2 + k^2 - r^2 = 0

Compare this to the general form equation:

x^2 + y^2 + Dx + Ey + F = 0

Identify the values of D, E, and F:

D = -2h

E = -2k

F = h^2 + k^2 - r^2

Now you can convert equations between the general form and the standard form. If you're missing some variables in the general form equation, just treat them as zero and proceed with the same steps.

Read more about standard forms here:

https://brainly.com/question/19169731

#SPJ1

Answer:

f(x) is the blue graph, g(x) is the red graph.

x^2 - 3x + 17 - (2x^2 - 3x + 1) = 16 - x^2

16 - x^2 = 0 when x = -4, 4

So the area between these two graphs is (using the TI-83 graphing calculator):

fnInt (16 - x^2, x, -4, 4) = 85 1/3

Three trigonometric ratios are Sin C=21/29,Cos C=20/29, Tan C=21/20.

Trigonometric ratios, also known as trigonometric functions, are mathematical functions that relate the angles of a right triangle to the lengths of its sides. The three primary trigonometric ratios are sine (sin), cosine (cos), and tangent (tan), which are defined as follows:

In the given triangle;

AB=21

BC=20

AC=29

Calculating trigonometric ratios;

Sin C=Perpendicular/Hypotenuse

=AB/AC

=21/29

Cos C=Base/Hypotenuse

=BC/AC

=20/29

Tan C=Perpendicular/Base

=AB/BC

=21/20.

To know more about hypotenuse, visit:

https://brainly.com/question/29407794

#SPJ1

Therefore, the solution is equation (x, y) = (52/7, -10/7).

To solve the system of equations by elimination, we need to eliminate one of the variables. We can do this by multiplying one or both equations by a constant to create opposite coefficients for one of the variables. Then, we can add or subtract the equations to eliminate that variable and solve for the other variable. Here's how to solve the given system of equations:

Multiply the first equation by 3 and the second equation by 2 to create opposite coefficients for y:

[tex]3(x - 2y = 12) - > 3x - 6y = 36[/tex]

[tex]2(-5x + 3y = -44) - > -10x + 6y = -88[/tex]

Add the equations to eliminate y:

[tex]3x - 6y + (-10x + 6y) = 36 + (-88)[/tex]

[tex]-7x = -52[/tex]

Solve for x by dividing both sides by -7:

[tex]x = 52/7[/tex]

Substitute x = 52/7 into either equation to solve for y. Using the first equation:

[tex]52/7 - 2y = 12[/tex]

[tex]-2y = 12 - 52/7[/tex]

[tex]-2y = 72/7 - 52/7[/tex]

[tex]-2y = 20/7[/tex]

[tex]y = -(10/7)[/tex]

Check the solution by substituting the values of x and y into both equations:

[tex]x - 2y = 12 - > 52/7 - 2(-10/7) = 12 (true)[/tex]

[tex]-5x + 3y = -44 - > -5(52/7) + 3(-10/7) = -44 (true)[/tex]

Therefore, the solution is (x, y) = (52/7, -10/7).

To know more about equation visit:

https://brainly.com/question/10413253

#SPJ1

The expression that gives the area as a function of the width is 4w²+3w.( option B)

The area of a shape is the space occupied by the boundary of a plane figures like circles, rectangles, and triangles.

The area of a rectangle is expressed as ;

A = l×w, where l is the length and w is the width.

Since the length is 3 inches more than four times the width, then;

l = 3+4w

Representing 3+w for l in the area formula, then we have;

A = (3+4w)(w)

A = 4w²+3w

therefore the expression that represents the area is 4w²+3w

learn more about area of rectangle from

https://brainly.com/question/2607596

#SPJ1

The correct statement regarding the null hypothesis is: the null hypothesis claims the opposite of what the researcher believes.

The null hypothesis is the claim that no relationship exists between two sets of data or variables being analyzed. The

null hypothesis is that any experimentally observed difference is due to chance alone, and an underlying causative

relationship does not exist, hence the term "null".

In research, the null hypothesis is a statement of no effect or no relationship between variables, while the alternative

hypothesis represents the effect or relationship the researcher is interested in demonstrating.

The purpose of statistical testing is to determine whether there is enough evidence to reject the null hypothesis in

favor of the alternative hypothesis.

for such more question on null hypothesis

https://brainly.com/question/25263462

#SPJ11

Since they can't rent for a fraction of a day, the maximum number of days they can rent the small car with insurance is 10 days.

The total cost of renting a small car with insurance is:

$465 = $25x + $21x

Simplifying and solving for x, we get:

$465 = $46x

x = 10.11

Since they can't rent for a fraction of a day, the maximum number of days they can rent the small car with insurance is 10 days.

Learn more about insurance below.

https://brainly.com/question/25221455

#SPJ1

Step-by-step explanation:

rotate the triangle in your mind (or as actual picture on your phone or computer), so that the right angle is the bottom right or bottom left, and C being the opposite bottom angle.

then we see

28 = cos(C) × 35

21 = sin(C) × 35

and so,

sin(C) = 21/35 = 3/5

cos(C) = 28/35 = 4/5

tan(C) = sin(C)/cos(C) = 3/5 / 4/5 = 3/4

Answer:

6x² + 19x + 15

Step-by-step explanation:

(2x+3)(3x + 5)

= 6x² + 10x + 9x + 15

= 6x² + 19x + 15

So, the answer is 6x² + 19x + 15

The distance between the two points can be found to be, and the number that goes beneath the radical symbol is 80.

To find the distance between two points in a plane, you can use the distance formula derived from the Pythagorean theorem. The distance formula is:

d = √[(x₂ - x₁)² + (y₂ - y₁)²]

where (x₁, y₁) and (x₂, y₂) are the coordinates of the two points.

In this case, the coordinates of the two points are (-4, 1) and (4, 5). So, x₁ = -4, y₁ = 1, x₂ = 4, and y₂ = 5.

Now, apply the distance formula:

d = √[(4 - (-4))² + (5 - 1)²]

d = √[(8)² + (4)²]

d = √(64 + 16)

d = √80

Find out more on distance at https://brainly.com/question/7243416

#SPJ1

The total area of the figure with of the semicircle and triangle is 12.27 sq. ft.

Half of a circle is known as a semicircle, and the diameter of the circle is equal to the length of the semicircle's straight edge. A sector of a circle is a section of a circle that is bounded by an arc, two radii, and both. A semicircle is always half of a circle and has a constant central angle of 180 degrees, but a sector can be any part of a circle and has a central angle that can vary from 0 to 360 degrees. This is the major distinction between the two.

Given, the diameter of the semicircle is 3 ft, so its radius is 1.5 ft.

Now, area of the semicircle is given as:

A = 1/2 * pi * (1.5)² = 1.77 sq ft

The area of the triangle is:

A = 1/2 * 3 ft * 7 ft = 10.5 sq ft

Adding the areas we have the total area of the figure:

1.77 sq ft + 10.5 sq ft = 12.27 sq ft

Hence, the total area of the figure is 12.27 sq. ft.

Learn more about area of semicircle here:

https://brainly.com/question/16952186

#SPJ1

Here are the given expressions and their respective variables and coefficients:

12s + 4t | Variables: s, t | Coefficients: 12, 4

46rs + 10x | Variables: r, s, x | Coefficients: 46, 10

12q + 14x | Variables: q, x | Coefficients: 12, 14

10x + 10y | Variables: x, y | Coefficients: 10, 10

17rs + 32x | Variables: r, s, x | Coefficients: 17, 32

5x + 7y - 12z | Variables: x, y, z | Coefficients: 5, 7, -12

36ab + 70m | Variables: a, b, m | Coefficients: 36, 70

3r + 19a + 10m | Variables: r, a, m | Coefficients: 3, 19, 10

7k + 16m | Variables: k, m | Coefficients: 7, 16

8r + 5s | Variables: r, s | Coefficients: 8, 5

9h + 120m | Variables: h, m | Coefficients: 9, 120

12k + m | Variables: k, m | Coefficients: 12, 1

7g + 15h + w | Variables: g, h, w | Coefficients: 7, 15, 1

4c - 8d + 12f | Variables: c, d, f | Coefficients: 4, -8, 12

6t + 17r - 35j | Variables: t, r, j | Coefficients: 6, 17, -35

Read more about Coefficients here:

https://brainly.com/question/1038771

#SPJ1

For events A and B to be independent, the condition that must be true is:
P(A ∩ B) = x * y

The correct condition that must be true if events A and B are independent is:

P(A ∩ B) = P(A) x P(B).

where P(A) is the probability of event A, P(B) is the probability of event B, and P(A ∩ B) is the probability of both events A and B occurring together.

In other words, if events A and B are independent, then the probability of both events occurring together is equal to the product of their individual probabilities.

When two events A and B are independent, the following condition must be true:
P(A ∩ B) = P(A) * P(B)
In your case, the probability of event A is x, and the probability of event B is y.

Therefore, the correct answer is:

P(A ∩ B) = x*y

For similar question on condition.

https://brainly.com/question/10739947

#SPJ11

Sampled 200 delinquent credit card accounts instead of 100, the margin of error would decrease.

Sampled 200 delinquent credit card accounts, the margin of error for the sample mean at a 95% confidence level would be $80.164.

Smaller than the margin of error we found earlier for a sample size of 100.

The margin of error for the sample means at a 95% confidence level, we need to use the formula:
[tex]Margin of error = z\times (standard deviation / square root of sample size)[/tex]
[tex]z\times[/tex] is the z-score for the 95% confidence level, which is 1.96.
So, plugging in the given values, we get:
[tex]Margin of error = 1.96 \times  (578 / \sqrt 100)[/tex]
[tex]Margin of error = 1.96 \times 57.8[/tex]
Margin of error = 113.008
Therefore, the margin of error for the sample mean at a 95% confidence level is $113.008.
Repeated samples of 100 delinquent credit card accounts and computed the sample mean each time, we would expect the true population mean to be within $113.008 of our sample mean about 95% of the time.
The margin of error is inversely proportional to the square root of the sample size. So, as the sample size increases, the margin of error decreases.
To see this, let's plug in the new sample size into the margin of error formula:
[tex]Margin of error = 1.96 \times (578 / \sqrt 200)[/tex]
[tex]Margin of error = 1.96 \times 40.9[/tex]
Margin of error = 80.164

For similar questions on Margin

https://brainly.com/question/30404882

#SPJ11

The monthly interest rate is the annual interest rate divided by 12

To calculate the monthly interest rate, we need to divide the annual interest rate by 12 (since there are 12 months in a year).

So if the annual interest rate is 8%, the monthly interest rate can be calculated as:

Monthly interest rate = Annual interest rate / 12

Monthly interest rate = 8% / 12

Monthly interest rate = 0.6667%

Therefore, the monthly interest rate would be 0.6667%.

Read more about interest at

https://brainly.com/question/24924853

#SPJ1

In a standard additions method workup the information from the linear regression that is most closely related to the unknown concentration is this:  the intercept of the linear regression line.

In the standard additions method workup, the information that is most closely related to the unknown concentration is the intercept of the linear regression line.

The reason why this is the case is that the intercept represents the y-value of the regression line where the line crosses the y-axis. This y-axis is the value of the dependent variable when the independent variable or concentration is zero. So, by solving for the intercept, we can determine the concentration of the unknown sample.

Learn more about linear regression here:

https://brainly.com/question/25987747

#SPJ1