We have shown that there exists some c in (0, 1) such that f(c) = g(c).
By the intermediate value theorem, since f and g are continuous on [0, 1], and f(0) < g(1), there exists some a in the interval [0, 1] such that f(a) = g(1).
Similarly, since f and g are continuous on [0, 1] and f(1) > g(1), there exists some b in the interval [0, 1] such that f(1) > g(b).
Now, consider the function h(x) = f(x) - g(x). Then h is continuous on [0, 1], and h(0) < 0 and h(1) > 0.
By the intermediate value theorem again, there exists some c in the interval (0, 1) such that h(c) = 0, which means that f(c) - g(c) = 0, or f(c) = g(c). Thus, we have shown that there exists some c in (0, 1) such that f(c) = g(c).
To learn more about continuous visit:
https://brainly.com/question/31694381
#SPJ11
right triangles, find the exact values of x and y.
Step-by-step explanation:
the main triangle is an isoceles triangle (both legs are equally long). that means that the height y bergen the 2 legs splits the baseline in half.
therefore,
x = 10/2 = 5
Pythagoras gives us y.
c² = a² + b²
c being the Hypotenuse (the side opposite of the 90° angle). in our case 10.
a and b are the legs. in our case x and y.
10² = 5² + y²
100 = 25 + y²
75 = y²
y = sqrt(75) = 8.660254038...
Use the graph of the rational function to complete the following statement.
As , .
Question content area bottom left
Part 1
As ,
enter your response here.
.
.
.
Question content area right
Part 1
-10
-8
-6
-4
-2
2
4
6
8
10
-10
-8
-6
-4
-2
2
4
6
8
10
x
y
A coordinate system has a horizontal x-axis labeled from negative 10 to 10 in increments of 1 and a vertical y-axis labeled from negative 10 to 10 in increments of 1. A graph has three branches and asymptotes y= 1, x = negative 3 and x =3. The first branch is above y equals 1 and to the left of x equals negative 3 comma approaching both. The second branch opens downward between the vertical asymptotes comma reaching a maximum at left parenthesis 0 comma 0 right parenthesis . The third branch is above y equals 1 and to the right of x equals 3 comma approaching both.
Asymptotes are shown as dashed lines. The horizontal asymptote is y = 1 The vertical asymptotes are x = -3 and x=3
The end behavior of the rational function is described as follows:
As x -> ∞, f(x) -> 1.
What is the horizontal asymptote of a function?The horizontal asymptote is the value of f(x) as x goes to infinity, as long as this value is different of infinity.
For this problem, we have that both when x goes to negative infinity and when x goes to positive infinity, the graph of the function goes to y = 1, hence the end behavior of the function is defined by the horizontal asymptote as follows:
As x -> ∞, f(x) -> 1.
More can be learned about horizontal asymptotes at https://brainly.com/question/4138300
#SPJ1
1. The speeds of all cars traveling on a stretch of Interstate Highway 1-95 are normally distributed with a mean of 68 mph and a standard deviation of 3 mph. a. Write the sampling distribution of mean when the sample is (say) 16 cars (specify the shape, center, standard deviation)? Find the probability that the mean speed of a random sample of 16 cars traveling on this stretch of this interstate highway is less than 66 mph. (Use the appropriate sampling distribution to find the probabilities) b. Find the range to capture the middle 95% of averages. c. Find the range to capture the middle 90% of averages. d. Find the probability to have an average exceed 67 mph.
a. The probability of getting a z-score less than -2.67 is 0.0038
b. The range to capture the middle 95% of averages is 66.56 mph to 69.44 mph.
c. The range to capture the middle 90% of averages is 66.77 mph to 69.23 mph.
d. the probability of having an average exceeding 67 mph is 0.9082.
a. The sampling distribution of the mean of a sample of 16 cars is normally distributed with a mean of 68 mph and a standard deviation of 3/√16 = 0.75 mph. The shape of the distribution is normal, the center is 68 mph, and the standard deviation is 0.75 mph. To find the probability that the mean speed of a random sample of 16 cars is less than 66 mph, we need to calculate the z-score:
z = (66 - 68) / 0.75 = -2.67
Using a z-table, we find that the probability of getting a z-score less than -2.67 is 0.0038.
b. To capture the middle 95% of averages, we need to find the z-scores that correspond to the 2.5th and 97.5th percentiles of the normal distribution. Using a z-table, we find that these z-scores are -1.96 and 1.96, respectively. Then we can use the formula:
68 + (-1.96)(0.75) < μ < 68 + (1.96)(0.75)
which gives us the range of 66.56 mph to 69.44 mph.
c. To capture the middle 90% of averages, we need to find the z-scores that correspond to the 5th and 95th percentiles of the normal distribution. Using a z-table, we find that these z-scores are -1.645 and 1.645, respectively. Then we can use the formula:
68 + (-1.645)(0.75) < μ < 68 + (1.645)(0.75)
which gives us the range of 66.77 mph to 69.23 mph.
d. To find the probability of having an average exceed 67 mph, we need to find the z-score that corresponds to 67 mph:
z = (67 - 68) / 0.75 = -1.33
Using a z-table, we find that the probability of getting a z-score less than -1.33 is 0.0918. Therefore, the probability of having an average exceed 67 mph is 1 - 0.0918 = 0.9082.
Learn more about probability
https://brainly.com/question/24756209
#SPJ4
A particular fruit's weights are normally distributed, with a mean of 692 grams and a standard deviation of 23 grams. If you pick 12 fruit at random, what is the probability that their mean weight will be between 681 grams and 682 grams.
The probability that the mean weight of 12 fruit will be between 681 and 682 grams is 0.0184.
We can solve this problem by using the central limit theorem, which tells us that the distribution of sample means will be approximately normal if the sample size is sufficiently large.
First, we need to calculate the standard error of the mean:
standard error of the mean = standard deviation / sqrt(sample size)
= 23 / sqrt(12)
= 6.639
Next, we can standardize the sample mean using the formula:
z = (x - mu) / (standard error of the mean)
where x is the sample mean, mu is the population mean, and the standard error of the mean is calculated above.
z1 = (681 - 692) / 6.639 = -1.656
z2 = (682 - 692) / 6.639 = -1.506
Using a standard normal distribution table or calculator, we can find the probabilities corresponding to these z-scores:
P(z < -1.656) = 0.0484
P(z < -1.506) = 0.0668
The probability of the sample mean being between 681 and 682 grams is the difference between these probabilities:
P(-1.656 < z < -1.506) = P(z < -1.506) - P(z < -1.656)
= 0.0668 - 0.0484
= 0.0184
Therefore, the probability that the mean weight of 12 fruit will be between 681 and 682 grams is 0.0184.
To learn more about corresponding visit:
https://brainly.com/question/1597341
#SPJ11
find the orthogonal trajectories of the family of curves. (use c for any needed constant.) x2 2y2
To find the orthogonal trajectories of the given family of curves, we first need to understand what the term "orthogonal" means. In simple terms, two lines or curves are said to be orthogonal if they intersect at a right angle. Now, coming back to the problem, the given family of curves can be written as x^2 - 2y^2 = c, where c is a constant.
To find the orthogonal trajectories, we need to differentiate this equation with respect to y, treating x as a constant. This gives us:
-4xy = dy/dx
Now, we need to find the equation of the curves that intersect the given family of curves at a right angle, i.e., the slopes of the curves must be negative reciprocals of each other. Therefore, we can write:
dy/dx = 4xy/k
where k is a constant. To solve this differential equation, we can separate the variables and integrate:
∫dy/4xy = ∫dx/k
ln|y| - ln|x^2| = ln|c| + ln|k|
ln|y/x^2| = ln|ck|
y/x^2 = ±ck
Therefore, the orthogonal trajectories of the given family of curves are given by y = ±kx^2/c, where k is a constant. These curves intersect the original family of curves at right angles.
1. Identify the family of curves: The given equation is x^2 + 2y^2 = c, where c is a constant. This represents a family of ellipses with different sizes depending on the value of c.
2. Calculate the derivative: To find the orthogonal trajectories, we first need to find the derivative of the given equation with respect to x. Differentiate both sides with respect to x:
d/dx(x^2) + d/dx(2y^2) = d/dx(c)
2x + 4yy' = 0
3. Find the orthogonal slope: The slope of the orthogonal trajectory is the negative reciprocal of the original slope. Since the original slope is y', the orthogonal slope is -1/y':
Orthogonal slope = -1/y'
4. Replace the original slope with the orthogonal slope:
2x + 4y(-1/y') = 0
5. Solve for y':
y' = -2x/(4y)
6. Solve the differential equation: Now we have a first-order differential equation to find the equation of the orthogonal trajectories:
dy/dx = -2x/(4y)
Separate variables and integrate both sides:
∫(1/y) dy = ∫(-2x/4) dx
ln|y| = -x^2/4 + k
7. Solve for y:
y = e^(-x^2/4 + k) = C * e^(-x^2/4), where C is a new constant.
The orthogonal trajectories of the given family of curves are represented by the equation y = C * e^(-x^2/4).
Learn more about orthogonal at : brainly.com/question/2292926
#SPJ11
An HR administrator wishes to know the proportion of employees that are currently using a very costly benefit to determine if it is still considered valuable by the staff. If the administrator has no preliminary notion of the proportion of employees using the benefit, how big a sample must she collect to be accurate within 0.09 at the 95% level of confidence?
Standard Normal Distribution Table
Round up to the next whole number
The HR administrator must collect a sample size of 108 employees to be accurate within 0.09 at the 95% confidence interval.
To determine the necessary sample size, we need to use the formula:
[tex]n = \frac{(z^2 )(p) (1-p)}{E^2}[/tex]
Where:
- n = sample size
- z = the z-score for the desired level of confidence (in this case, 1.96 for 95%)
- p = the estimated proportion of employees using the benefit (since we have no preliminary notion, we will use 0.5 as the most conservative estimate)
- E = the desired margin of error (0.09)
Plugging in these values, we get:
[tex]n = \frac{(1.96^2 )(0.5) (1-0.5)}{0.09^2}[/tex]
n = 107.92 = 108
We round up to the next whole number since we can't have a fraction of a person in our sample.
To know more about the confidence interval visit:
brainly.com/question/29680703
#SPJ11
[tex]f(x)=\frac{x^{2} }{x+1}[/tex]
Find the derivative of [tex]f(x)[/tex] by using first principles.
Step-by-step explanation:
which of the principles and the question is not clear i saw something different before i clicked on it
Answer:
[tex] \dfrac{x^2 + 2x}{(x + 1)^2} [/tex]
Step-by-step explanation:
[tex] f(x) = \dfrac{x^2}{x + 1} [/tex]
[tex] \dfrac{d}{dx} \dfrac{x^2}{x + 1} = [/tex]
[tex] = \dfrac{d}{dx} [(x^2)(x + 1)^{-1}] [/tex]
[tex]= (x^2)(-1)(x + 1)^{-2} + (x + 1)^{-1}(2x)[/tex]
[tex] = \dfrac{-x^2}{(x + 1)^{2}} + \dfrac{2x}{x + 1} [/tex]
[tex] = \dfrac{-x^2}{(x + 1)^{2}} + \dfrac{2x^2 + 2x}{(x + 1)^2} [/tex]
[tex] = \dfrac{x^2 + 2x}{(x + 1)^2} [/tex]
Can one of the triangle congruence theorem listed below be used to show the two triangles are congruent?
Answer:
Vertical angles are congruent, so the two triangles are congruent by AAS (Angle-Angle-Side).
None of the theorems listed can be used to show congruence.
In a large city, the average number of lawn mowings during summer is normally distributed with mean u and standard deviation 0-8.7. If I want the margin of error for a 90% confidence interval to be +3, I should select a simple random sample of size (4 decimal points)
To achieve a margin of error of +3 for a 90% confidence interval for the average number of lawn mowings during summer in a large city with a mean of u and a standard deviation of 0-8.7, a simple random sample of size 18 should be selected.
To determine the sample size needed to achieve a margin of error of +3 for a 90% confidence interval, we can use the formula:
n = (z * σ / E)^2
where n is the sample size, z is the z-score for the desired confidence level (in this case, 1.645 for 90% confidence), σ is the standard deviation, and E is the margin of error.
Substituting the given values into the formula, we get:
n = (1.645 * 0.8 / 3)^2 = 17.18
Rounding up to the nearest whole number, we get a sample size of 18.
Therefore, to achieve a margin of error of +3 for a 90% confidence interval for the average number of lawn mowings during summer in a large city with a mean of u and a standard deviation of 0-8.7, a simple random sample of size 18 should be selected. This sample size ensures that the estimate of the population means based on the sample mean is within +3 of the true population mean with 90% confidence.
To learn more about Standard deviation, visit:
https://brainly.com/question/475676
#SPJ11
The relationship between training costs (x) and productivity () is given by the following formula, y -3x + 2x2 + 27. a. Will Nonlinear Solver be guaranteed to identify the level of training that maximizes productivity? Ο Nο Yes b. If training is set to 5, what will be the resulting level of productivity? (Round your answer to the nearest whole number.) Level of productivity
a. Yes. Nonlinear Solver will be guaranteed to identify the level of training that maximizes productivity b. If training is set to 5, the resulting level of productivity is 62.
a. Yes, Nonlinear Solver will be guaranteed to identify the level of training that maximizes productivity.
This is because the formula given is a quadratic equation with a positive coefficient for the x-squared term (2x2), indicating a concave upward curve. The maximum point of a concave upward curve is always at the vertex, which can be found using the Nonlinear Solver.
b. If training is set to 5, the resulting level of productivity can be found by substituting x=5 into the equation:
y = -3x + 2x^2 + 27
y = -3(5) + 2(5)^2 + 27
y = -15 + 50 + 27
y = 62
Therefore, the resulting level of productivity when training is set to 5 is 62 (rounded to the nearest whole number).
Know more about productivity here:
https://brainly.com/question/2992817
#SPJ11
number of employees 1 2 3 4 10
number of customers 8 4 13 17 39
Would a linear or exponential model for the relationship between the number of employees and number of customers be more appropriate? Explain how you know.
A linear or exponential model would not model the relationship between the number of employees and number of customers
Would a linear or exponential model the relationshipFrom the question, we have the following parameters that can be used in our computation:
number of employees 1 2 3 4 10
number of customers 8 4 13 17 39
Testing a linear model
To do this, we calculate the difference between the y values
So, we have
13 - 4 = 4 - 8
9 = -4 ---- this is false
So, the function is not a linear function
Testing an exponential model
To do this, we calculate the ratio of the y values
So, we have
13/4 = 4/8
3.25 = 1/2 ---- this is false
So, the function is not an exponential function
Read more about functions at
https://brainly.com/question/4138300
#SPJ1
(e) A company has 8000 employees. 3600 of them belong to a certain labour union. A
committee of 20 people must be selected. If the selection is random, what is the probability
that 12 of the selected people belong to the labour union?
The probability that exactly 12 of the selected people belong to the labor union is approximately 0.167 or 16.7%.
To solve this problem, we can use the binomial probability formula:
[tex]P(X = k) = (n choose k)p^{k}(1 - p)^{(n - k)}[/tex]
where:
- P(X = k) is the probability of getting k successes (12 in this case)
- n is the number of trials (20 in this case)
- p is the probability of success (belonging to the labor union, which is 3600/8000 or 0.45)
- (n choose k) is the number of ways to choose k items from a set of n items, which is given by the binomial coefficient formula (n! / (k! (n-k)!))
So, plugging in the values we get:
[tex]P(X = 12) = (20 choose 12) (0.45)^{12} (1 - 0.45)^{(20 - 12)}\\ = (167,960)(0.45)^{12}(0.55)^{8}\\ = 0.167[/tex]
Therefore, the probability that exactly 12 of the selected people belong to a labor union is approximately 0.167 or 16.7%.
To know more about the calculation of probability visit:
https://brainly.com/question/24756209
#SPJ11
A mountain climber stands on level ground 300 m from the
base of a cliff. The angle of elevation to the top of the clif
is 58°. What is the approximate height of the cliff? Show
your work on paper and submit the paper to me.
The approximate height of the cliff, given the angle of elevation would be 480. 09 meters.
How to find the height of the cliff ?One approach to determining the cliff's height involves applying trigonometry's tangent function . In this instance, a given angle of elevation (58°) and 300 meters' distance from its base are known.
The tangent function is defined as:
tan (angle) = opposite side / adjacent side
tan ( 58 ° ) = h / 300
h = 300 x tan(58°)
h = 300 x 1. 6003
= 480. 09 meters
Find out more on height at https://brainly.com/question/14524817
#SPJ1
During a construction project, engineers used explosives to excavate 140 feet of tunnel into a mountain. But because of time constraints and environmental concerns, they brought in a tunnel boring machine (TBM) to excavate the rest of the tunnel. The data table lists some observations an engineer made about the length of the tunnel after the TBM was introduced.
The equation that represents the length of the completed tunnel based on the number of days is y = 45x + 140.
Option A is the correct answer.
We have,
From the table,
We take two ordered pairs:
(15, 815) and (20, 1040)
Now,
The equation can be written as y = mx + c.
And,
m = (1040 - 815) / (20 - 15)
m = 225/5
m = 45
And,
(15, 815) = (x, y)
815 = 15 x 45 + c
c = 815 - 675
c = 140
Now,
y = mx + c
y = 45x + 140
Thus,
The equation that represents the length of the completed tunnel based on the number of days is y = 45x + 140.
Learn more about equation of a line here:
https://brainly.com/question/23087740
#SPJ1
1/20 ÷ 5 could someone answer this
The value of the expression is 1/100.
We have,
To solve this expression, we can use the division property of fractions which states that dividing by a fraction is the same as multiplying by its reciprocal.
So, we have:
1/20 ÷ 5
= 1/20 x 1/5 (reciprocal of 5 is 1/5)
= 1/100 (multiply numerator with numerator and denominator with denominator)
Therefore,
The simplified result is 1/100.
Learn more about expressions here:
https://brainly.com/question/3118662
#SPJ1
What equation is graphed in this figure?
Oy+2=-(-2)
Oy-4--(z+2)
Oy-3=(z+1)
Oy+1=-(z-3)
-4 -2
ty
ne
-2-
2
The equation of the graph is determined as y - 1 = 5x/3.
What is the equation of the graph?
The equation of the graph is calculated by applying the general equation of a line form.
y = mx + c
where;
m is the slope of the graphc is the y intercept = 1The slope of the graph is calculated as follows;
m = Δy/Δx
m = (y₂ - y₁ ) / (x₂ - x₁ )
m = ( -4 - 1 ) / (3 - 0)
m = -5/3
y = -5x/3 + 1
y - 1 = 5x/3
Learn more about equation of line here: https://brainly.com/question/13763238
#SPJ1
QUESTION 4 RPM Choose one. 1 point My fan rotates at 143 RPM (Revolutions per minute), and it has been on for 87 seconds. How many times has it rotated? 143 O 87 230 O 207 6032 O 12441 1.64 A sword does 14 points of damage each second. An axe does 25 points of damage every 3 seconds. Which weapon will do more damage over the course of a minute? O Axe O Both are equal O Sword O Neither QUESTION 9 Probability Choose one. 1 point What is the percent probability of rolling a six on a single six sided die? For this, the spreadsheet should be displaying whole numbers. O 0.6 O 50% O 17% O 83% O 100%
The times it rotates is given by 207 rotations, the weapon that will do the more damage is sword and percent probability of rolling a six on a single six sided die is 17%.
Probability refers to potential. A random event's occurrence is the subject of this area of mathematics. The range of the value is 0 to 1. Mathematics has included probability to forecast the likelihood of certain events. The degree to which something is likely to happen is basically what probability means. You will understand the potential outcomes for a random experiment using this fundamental theory of probability, which is also applied to the probability distribution.
a) Number of rotation in 1min = 143
No of rotation in 60 seconds = 143
No. of rotation in 1 seconds = 143/60
number of rotation in 87 seconds = 143/60 x 87 = 207 rotations.
b) Sword damage 14 in 1 seconds
Axe damage is 25 in 3 seconds
so in 1 seconds it is 25/3
Sword damage in 1 min = 14 x 60 = 840 units
Axe damage in 1 min = 25/3 x 60 = 500 units
Swords will do more damage in 1 min .
c) Probability = No of favorable outcome / Total number of outcome x 100
= Total outcomes = {1, 2, 3, 4, 5, 6}
= 1/6 = 100
= 17%.
Therefore, percent probability is 17%.
Learn more about Probability:
https://brainly.com/question/22690728
#SPJ4
Answer the following questions for the function
f(x) = x sqrt(x^2 + 36) defined on the interval - 5 ≤ r ≤ 6. F(x) is concave down on the interval x = to x =
f(x) is concave up on the interval x = to x = The inflection point for this function is at x = The minimum for this function occurs at x = The maximum for this function occurs at x =
f(x) is concave down on the interval -5 ≤ x ≤ -6 and 0 ≤ x ≤ 6.
f(x) is concave up on the interval -6 ≤ x ≤ 0.
To determine where f(x) is concave up or concave down, we need to calculate the second derivative of f(x):
f(x) = x √([tex]x^2[/tex] + 36)
f'(x) = √[tex]x^2[/tex] + 36) + [tex]x^2[/tex] √([tex]x^2[/tex] + 36)
f''(x) = (x ([tex]x^2[/tex] +72) )/(([tex]x^2[/tex]+36)[tex]^(3[/tex]/2))
To find where f(x) is concave up or concave down, we need to find where f''(x) > 0 (concave up) or f''(x) < 0 (concave down).
f''(x) = 0 when x = 0 or x = +/-6.
Thus, f(x) is concave down on the interval -5 ≤ x ≤ -6 and 0 ≤ x ≤ 6, and concave up on the interval -6 ≤ x ≤ 0.
The inflection point for this function is at x = 0.
To find the minimum and maximum for this function, we need to look at the endpoints and critical points of the interval -5 ≤ x ≤ 6.
f(-5) = -5√61 and f(6) = 6√72, so the minimum occurs at x = -5 and the maximum occurs at x = 6.
Therefore:
f(x) is concave down on the interval -5 ≤ x ≤ -6 and 0 ≤ x ≤ 6.
f(x) is concave up on the interval -6 ≤ x ≤ 0.
The inflection point for this function is at x = 0.
The minimum for this function occurs at x = -5.
The maximum for this function occurs at x = 6.
To know more about inflection point, here
https://brainly.com/question/25918847
#SPJ4
A woman wants to construct a box whose base length is twice the base width. The material to build the top and bottom is $9/m^2 and the material to build the sides is $6/m^2. If the woman wants the box to have a volume of 70 m3, determine the dimensions of the box (in metres) that will minimize the cost of production. What is the minimum cost?
The minimum cost of production is $278.46.
The base width of the box be x, then the base length is 2x. Let the height of the box be h.
The volume of the box is given by:
V = base area × height
[tex]70 = x[/tex] × [tex]2x[/tex] × [tex]h[/tex]
[tex]h = 35/x^2[/tex]
The cost of producing the box is given by:
[tex]C = 2[/tex] ×[tex](cost of top/bottom) + 4[/tex] × [tex](cost of side)[/tex]
[tex]C = 2[/tex]× [tex]9[/tex]× [tex](2x[/tex] × [tex]x) + 4[/tex] × [tex]6[/tex] × [tex](2x + 2h)[/tex]
[tex]C = 36x^2 + 48xh[/tex]
Substituting the expression for h obtained above:
[tex]C = 36x^2+ 48x(35/x^2)[/tex]
[tex]C = 36x^2+ 1680/x[/tex]
To minimize C, we take the derivative with respect to x and set it to zero:
[tex]dC/dx = 72x - 1680/x^2 = 0[/tex]
[tex]72x = 1680/x^2[/tex]
[tex]x^3 = 1680/72[/tex]
[tex]= 23.33[/tex]
x = 2.82 m (rounded to two decimal places)
Substituting this value of x in the expression for h, we get:
[tex]h = 35/(2.82)^2[/tex]
[tex]= 4.34 m[/tex] (rounded to two decimal places)
Therefore, the dimensions of the box that minimize the cost of production are:
[tex]Base width = x = 2.82 m[/tex]
[tex]Base length = 2x = 5.64 m[/tex]
[tex]Height = h = 4.34 m[/tex]
To find the minimum cost, we substitute these values of x and h in the expression for C:
[tex]C = 36(2.82)^2 + 1680/(2.82)[/tex]
[tex]C = $278.46[/tex] (rounded to two decimal places)
Therefore, the minimum cost of production is $278.46.
To know more about cost of production visit:
https://brainly.com/question/4133859
#SPJ4
A construction crew has just built a new road. They built the road at a rate of 6 kilometers per week. They built 7. 68 kilometers of road. How many weeks did it take them?
We can use the formula:
distance = rate × time
where distance is the total length of the road built, rate is the speed at which the road was built, and time is the number of weeks it took to build the road.
Substituting the given values, we get:
7.68 kilometers = 6 kilometers/week × time
To solve for time, we can divide both sides of the equation by 6 kilometers/week:
7.68 kilometers ÷ 6 kilometers/week = time
Simplifying the left-hand side, we get:
1.28 weeks = time
Therefore, it took the construction crew approximately 1.28 weeks to build the road.
A search plane covers 50 square miles of countryside. How many hectares does the plane search?
1,295
12.95
129.5
12,950
The number of hectares that the plane search is 129450 hectares
How many hectares does the plane search?From the question, we have the following parameters that can be used in our computation:
A search plane covers 50 square miles of countryside
This means that
Area = 50 square miles of countryside
As a general rule
1 square miles = 258.999 hectares
Substitute the known values in the above equation, so, we have the following representation
50 * 1 square miles = 258.999 hectares * 50
Evaluate
50 square miles = 129450 hectares
Hence, the number of hectares is 129450 hectares
Read mroe about metric units at
https://brainly.com/question/28234927
#SPJ1
you wish to test the following claim ( ) at a significance level of . you obtain 25.4% successes in a sample of size from the first population. you obtain 20.3% successes in a sample of size from the second population. for this test, you should not use the continuity correction, and you should use the normal distribution as an approximation for the binomial distribution. what is the test statistic for this sample? (report answer accurate to three decimal places.) test statistic
The test statistic for this sample is z = (0.254 - 0.203) / (p_hat * (1 - p_hat) * (1/n1 + 1/n2))
Based on the given information, we can set up the hypotheses as follows:
Null hypothesis: p1 - p2 = 0
Alternative hypothesis: p1 - p2 > 0
where p1 represents the proportion of successes in the first population and p2 represents the proportion of successes in the second population.
Since the sample sizes are large (n1 and n2 are not given, but we can assume they are large enough for the normal approximation to hold), we can use the normal distribution to approximate the sampling distribution of the difference in sample proportions.
The test statistic for this sample can be calculated as follows:
z = (p1 - p2) / sqrt(p_hat * (1 - p_hat) * (1/n1 + 1/n2))
where p_hat = (x1 + x2) / (n1 + n2), x1 and x2 are the number of successes in the two samples respectively.
Plugging in the given values, we get:
p_hat = (0.254n1 + 0.203n2) / (n1 + n2)
z = (0.254 - 0.203) / sqrt(p_hat * (1 - p_hat) * (1/n1 + 1/n2))
Since the significance level is not given, we cannot determine the critical value for the test. However, we can use the test statistic to calculate the p-value for the test, which is the probability of observing a difference in sample proportions as extreme as the one we observed (or more extreme) under the null hypothesis.
Once we have the p-value, we can compare it to the significance level to make a decision about whether to reject or fail to reject the null hypothesis.
Note: It is important to mention that using the normal approximation without the continuity correction may not always be accurate, especially when the sample sizes are small or the proportion of successes is close to 0 or 1. In such cases, it is recommended to use other methods (such as exact tests or simulation) that do not rely on the normal approximation.
More on test-statistic: https://brainly.com/question/16244531
#SPJ11
For a four strokes engine, the camshaft that controls the valves a timing rotates at a. Double the engine rotational speed b. Half the engine rotational speed
c. Same engine rotational speed
d. none of the options
The correct answer is option (c) same engine rotational speed.
In a four-stroke engine, the camshaft rotates at half the speed of the crankshaft. The camshaft controls the opening and closing of the engine valves, which allows for the intake of fuel and air and the expulsion of exhaust gases.
When the engine rotational speed is doubled, the crankshaft will rotate twice as fast, but the camshaft will still rotate at half the speed of the crankshaft. This means that the camshaft will still rotate at the same speed as before, and the valve timing will remain the same.
Similarly, when the engine rotational speed is halved, the camshaft will still rotate at half the speed of the crankshaft. This means that the camshaft will still rotate at the same speed as before, and the valve timing will remain the same.
Therefore, the correct answer is option (c) same engine rotational speed.
To learn more about camshaft visit:
https://brainly.com/question/4435994
#SPJ11
A television researcher watched the Simpsons and determined that Bart Simpson makes a bad decision every 1/4 of an hour. If the television researcher saw Bart make 13 bad decisions, how many hours did the researcher watch the Simpsons ?
The television researcher watched the Simpsons for 3 and 1/4 hours.
To find the number of hours the researcher watched the Simpsons, we need to use the given information that Bart makes a bad decision every 1/4 of an hour. This means that in one hour (or 4/4 of an hour), Bart makes 4 bad decisions.
To find how many hours the researcher watched, we can divide the number of bad decisions by 4:
13 bad decisions ÷ 4 bad decisions per hour = 3.25 hours
Therefore, the researcher watched the Simpsons for 3 and 1/4 hours.
Learn more about basic maths
https://brainly.com/question/14660509
#SPJ4
42 inches divided by wht give me 3 ft and 6 inch
42 inches divided by 1 gives the measurement 3 feet and 6 inches.
We have to find what number divides the number 42 inches to 3 feet and 6 inches.
We know that the conversion of measurement units,
1 foot = 12 inches
3 feet = 3 × 12 inches = 36 inches
3 feet 6 inch = 36 + 6 = 42 inches
So the required number divides 42 inches in to 42 inches itself.
Any number divided by 1 gives the same number.
So the required number is 1.
Hence the unknown number which divide 42 inches to 3 feet and 6 inches is 1.
Learn more about Division here :
https://brainly.com/question/4933139
#SPJ1
The half-life of a radioactive substance is 3200 years. Find the quantity q(t) of the substance left at time t > 0 if q(0) = 20 g
The quantity q(t) of a radioactive substance left at time t > 0 with a half-life of 3200 years can be found using the formula: q(t) =
[tex]q(0) * 0.5^(t/3200)[/tex]
after 6400 years, only 10 grams of the substance will be left. where q(0) is the initial quantity of the substance.
Given q(0) = 20 g, we can find q(t) for any time t > 0 using the formula above. For example, if we want to find q(6400) - the quantity of the substance left after 6400 years - we can substitute t = 6400 in the formula and get: q(6400) =
[tex]20 * 0.5^(6400/3200)[/tex]
= 10 g.
After 6400 years, only 10 grams of the substance will be left. It is important to note that the half-life of a radioactive substance is the time it takes for half of the substance to decay.
After one half-life (3200 years), the initial quantity of the substance will be reduced to half (10 g). After two half-lives (6400 years), it will be reduced to one-fourth (5 g), and so on.
Learn more about radioactive here:
https://brainly.com/question/1770619
#SPJ4
Mr. Turner has two Algebra 1 classes. With one class, he lectured and the students took notes. In the other class, the students worked in small groups to solve math problems. After the first test, Mr. Turner recorded the student grades to determine if his different styles of teaching might have impacted student learning.
Class 1: 80, 81, 81, 75, 70, 72, 74, 76, 77, 77, 77, 79, 84, 88, 90, 86, 80, 80, 78, 82
Class 2: 70, 90, 88, 89, 86, 86, 86, 86, 84, 82, 77, 79, 84, 84, 84, 86, 87, 88, 88, 88
1. Analyze his student grades by filling in the table below. Which class do you think was the lecture and which was the small group? Why?
2. Draw histograms OR box plots to easily compare the shapes of the distributions.
3. Which measure of center and spread is more appropriate to use? Explain.
Answer:
1. Based on the grades, it is likely that Class 1 was the lecture class and Class 2 was the small group class. This is because the grades in Class 1 have a wider range (70-90) and a larger variance, while the grades in Class 2 are more tightly clustered together (82-90) and have a smaller variance.
2. Histograms or box plots could be drawn to compare the shapes of the distributions, but we cannot do this through text.
3. The most appropriate measure of center for these data sets is the mean, since the distributions are approximately symmetric. The most appropriate measure of spread for these data sets is the standard deviation, since the distributions are not strongly skewed and there are no extreme outliers.
Step-by-step explanation:
The correct values are,
Q1 Q2 IQR Mean Median MAD
Class 1 76.25 81.75 5.5 79.35 79.50 3.12
Class 2 84 88 4 84.60 86 3.85
What is mean by Subtraction?Subtraction in mathematics means that is taking something away from a group or number of objects. When you subtract, what is left in the group becomes less.
Now, The first step is to arrange the grades in the classes in ascending order.
Class 1: 70, 72, 74, 75, 76, 77, 77,77, 78, 79, 80, 80, 80, 81, 81, 82, 84, 86, 88, 90
Class 2: 70, 77, 79, 82, 84, 84, 84, 84, 86, 86, 86, 86, 86, 87, 88, 88, 88, 88, 89, 90
Hence, We get;
Q1 for class 1= 1/4(n + 1) = 21/4 = 5.25 = 76.25
Q2 for class 2 = 1/4(n + 1) = 5.25 = 84
Q3 for class 1= 3/4(n + 1) = 15.75 = 81.75
Q3 for class 2 = 3/4(n + 1) = 15.75 = 88
And,
IQR for class 1 = Q3 - Q1 = 81.75 - 76.25 = 5.50
IQR for class 2 = Q3 - Q1 = 88 - 84 = 4
Mean for class 1 = sum of grades / total number of grades = 1587 / 20 = 79.35
Mean for class 2 = sum of grades / total number of grades= 1692 / 20 = 84.6
Median for class 1 = (n + 1) / 2 = 21/2 = 10.5 = 79.50
Median for class 1 = (n + 1) / 2 = 21/2 = 10.5 = 86
Since, We know that;
MAD = 1/n ∑ l x - m(x) l
Where: n = number of observations
x = number in the data set
m = mean
Hence,
Mean absolute deviation for class 1 = 62. 3/ 20 = 3.12
Mean absolute deviation for class 2. = 77/ 20 = 3.85
Learn more about the subtraction visit:
https://brainly.com/question/17301989
#SPJ2
Find the inverse function of the function f(x)=−3x/8 .
The inverse function of the function f(x) = -3x/8 is f⁻¹(x) = -8x/3
To find the inverse of a function, we need to switch the roles of x and y and then solve for y.
Let's begin by rewriting the function f(x) in terms of y:
y = f(x) = -3x/8
Now, let's switch x and y:
x = -3y/8
Next, we'll solve for y:
x = -3y/8
8x = -3y
y = -8x/3
So the inverse function of f(x) = -3x/8 is f⁻¹(x) = -8x/3
To learn more on Functions click:
https://brainly.com/question/30721594
#SPJ1
Which of the following statements is false concerning the hypothesis testing procedure for a regression model?The F-test statistic is used.An α level must be selected.The null hypothesis is that the true slope coefficient is equal to zero.The null hypothesis is rejected if the adjusted r2 is above the critical value.The alternative hypothesis is that the true slope coefficient is not equal to zero.
The statements that is false concerning the hypothesis testing procedure for a regression model is "The null hypothesis is rejected if the adjusted r2 is above the critical value".
The statement that the null hypothesis is rejected if the adjusted r2 is above the critical value is false concerning the hypothesis testing procedure for a regression model.
The F-test statistic is used to test the overall significance of the regression model, and an α level must be selected to determine the level of significance.
The null hypothesis is that the true slope coefficient is equal to zero, which means that there is no linear relationship between the dependent variable and the independent variable.
The alternative hypothesis is that the true slope coefficient is not equal to zero, which means that there is a linear relationship between the dependent variable and the independent variable.
The adjusted R-squared value is a measure of the goodness of fit of the regression model and represents the proportion of the variation in the dependent variable that is explained by the independent variable(s) in the model.
The null hypothesis is rejected if the F-test statistic is above the critical value, which indicates that the regression model is statistically significant and the independent variable(s) have a significant linear relationship with the dependent variable.
Know more about regression model here:
https://brainly.com/question/29657622
#SPJ11
Find the distance between the points given.
(3, 4) and (6, 8)
5
√22
√7
Answer:
To find the distance between two points, we can use the distance formula:
d = sqrt((x2 - x1)^2 + (y2 - y1)^2)
where (x1, y1) and (x2, y2) are the coordinates of the two points.
In this case, the two points are (3, 4) and (6, 8), so we have:
d = sqrt((6 - 3)^2 + (8 - 4)^2)
d = sqrt(3^2 + 4^2)
d = sqrt(9 + 16)
d = sqrt(25)
d = 5
Therefore, the distance between the points (3, 4) and (6, 8) is 5 units.
It's worth noting that the values 5√22 and √7 do not match the above