limiting reactant and percent yield

Answer:

The balanced chemical equation shows that 1 mole of Ca reacts with 2 moles of H2O to produce 1 mole of Ca(OH)2 and 1 mole of H2.

Therefore, to react with 2.0 moles of Ca, we need 2.0 moles of Ca x (2 moles H2O / 1 mole Ca) = 4.0 moles of H2O.

So, 4.0 moles of H2O are needed to exactly react with 2.0 moles of Ca.

Hydrolysis occurs when Fe2O3 is dissolved in water, resulting in the formation of Fe(OH)3 and H+ ions. For every Fe in Fe2O3, there are 1.5 O. Thus, the iron content of Fe2O3 is reduced.

Water in the liquid state serves as the solvent in an aqueous solution. In other words, water molecules surround and integrate solute (dissolved) ions and molecules into their web of bonds. Following that, the dissolved species dispersed all over the water.

Aqueous solutions are made up of water and one or more dissolved materials. Solids, gases, or other liquids can all dissolve in an aqueous solution.

To know more about Hydrolysis visit:-

brainly.com/question/10840252

#SPJ1

Question:

How Many Particles Fe2O3 Will Produce In An Aqueous Solution (In Water).

Answer:333.3333 mL or 333mL

Explanation:

M1V1 = M2 V2

M1= 3.00 M

V2= 2500 ml

M2= 0.400M

V1= solving for

V1= M2V2/M1

0.400 X 2500 / 3.00  =

Answer:

c

Explanation:

formation is an igneous rock

Answer:

To solve this problem, we need to use the balanced chemical equation for the reaction between oxygen gas (O₂) and potassium chloride (KCI) to form potassium chlorate (KCIO₃):

2KCI + 3O₂ → 2KCIO₃

We can use the given mass of O₂ (20.8 g) and the molar mass of O₂ (32.00 g/mol) to find the moles of O₂:

20.8 g O₂ x (1 mol O₂ / 32.00 g O₂) = 0.65 mol O₂

According to the balanced equation, 3 moles of O₂ react with 2 moles of KCI to produce 2 moles of KCIO₃. Therefore, we can use the moles of O₂ to find the moles of KCIO₃:

0.65 mol O₂ x (2 mol KCIO₃ / 3 mol O₂) = 0.43 mol KCIO₃

Finally, we can use the molar mass of KCIO₃ (122.55 g/mol) to convert moles of KCIO₃ to grams of KCIO₃:

0.43 mol KCIO₃ x (122.55 g KCIO₃ / 1 mol KCIO₃) = 52.71 g KCIO₃

Therefore, the grams of KCIO₃ that can be produced from 20.8 g O₂ is 52.71 g KCIO₃. However, the problem does not ask for the grams of KCIO₃, but instead asks for the grams of KCIO, which is not a valid compound. It is possible that there is a typo in the problem and that it should have asked for the grams of KCIO₃ instead.

Explanation:

Most of the volume of an atom is taken up by the Electron clouds, and most of the mass of an atom is found in the nucleus.

Most of the volume of an atom is taken up by the electron clouds. This is because electrons occupy the space surrounding the nucleus in orbitals and they have a relatively large amount of space between them. The electron clouds represent the region in which electrons are likely to be found at any given time.

Most of the mass of an atom is found in the nucleus. The nucleus is made up of protons and neutrons, which have a much larger mass compared to electrons. Although the nucleus is much smaller in size compared to the electron clouds, it contains almost all of the mass of an atom.

To learn more about atom refer to:

brainly.com/question/30898688

#SPJ4

Answer:

Condensation is the process that took place when the water droplets formed on the grass.

Explanation:

Condensation is the process that took place when the water droplets formed on the grass. This occurs when airborne water vapour meets a colder surface, like the grass blades in the morning, and transforms into liquid form, generating tiny water droplets on the surface.

To calculate the growth rate of the wolf pack, we need to find the difference between the birth rate and death rate and divide that by the total wolf population. Therefore, the growth rate of the wolf pack is 0.27%.

The difference between births less deaths and the difference between immigrants and emigrants in a given country, territory, or geographic area at a given year is what is used to describe the annual increase in population size.

Growth rate = (birth rate - death rate) / total population

Birth rate = 15/51 = 0.294

Death rate = 8/51 = 0.157

Total population = 51

Growth rate = (0.294 - 0.157) / 51 = 0.137 / 51 = 0.0027 or 0.27%

To know more about birth rate visit:-

brainly.com/question/626780

#SPJ1

To calculate the difference in volume between the total volume of water and ethanol that were mixed to prepare the solution and the actual volume of the solution, we must first calculate the mass of ethanol present in the solution. We can do this by multiplying the molarity of ethanol (8.407 M) by the volume of ethanol present (529.0 mL) and the molar mass of ethanol (46.07 g/mol).

Mass of ethanol = 8.407 M x 529.0 mL x 46.07 g/mol = 24617.3 g

We can then calculate the volume of ethanol in the solution by dividing the mass of ethanol (24617.3 g) by the density of ethanol (0.7893 g/mL):

Volume of ethanol = 24617.3 g/0.7893 g/mL = 31202.1 mL

Therefore, the difference in volume between the total volume of water and ethanol that were mixed to prepare the solution and the actual volume of the solution is:

Difference in volume = Volume of ethanol + Volume of water - Actual volume of solution

Difference in volume = 31202.1 mL + 594.0 mL - (529.0 mL + 594.0 mL) = 277.1 mL

The difference in volume between the total volume of water and ethanol that were mixed to prepare the solution and the actual volume of the solution is 277.1 mL.

For more questions related to difference in volume, refer here:

https://brainly.com/question/30717869#

#SPJ11

At the final temperature, the ice has melted completely and the water has cooled down to the same temperature. Therefore, we can set the final temperature as T_f for both ice and water.

To determine the final temperature of the system, we need to use the principle of conservation of energy. The energy lost by the water when it cools down must be equal to the energy gained by the ice when it melts and warms up. We can express this as:

Q_water = Q_ice

where Q_water is the heat lost by the water and Q_ice is the heat gained by the ice.

The heat lost by the water can be calculated using the formula:

Q_water = m_water * C_water * ΔT

where m_water is the mass of water, C_water is the specific heat capacity of water, and ΔT is the change in temperature of water.

The heat gained by the ice can be calculated using the formula:

Q_ice = m_ice * L_f + m_ice * C_ice * ΔT

where m_ice is the mass of ice, L_f is the heat of fusion of ice, C_ice is the specific heat capacity of ice, and ΔT is the change in temperature of ice

Now we can set up the equation:

m_water * C_water * (T_i - T_f) = m_ice * L_f + m_ice * C_ice * (T_f - T_i)

To know more about temperature visit:-

brainly.com/question/29072206

#SPJ1

Mole fraction of the water in the solution made using 145.7 g of water and 120.0 g of ethanol is 0.7564 mole.

Mass of water = 145.7 g

molar mass of water = 18.02 g/mole

Number of moles = mass ÷ molar mass

                             = 145.7 g ÷ 18.02 g/mole

                             = 8.085 mole

mass of ethanol = 120 g

molar mass of ethanol = 46.07 g/mole

Number of moles = mass ÷ molar mass

                              = 120 g ÷ 46.07 g/mole

                              = 2.6047 mole

Total number of moles = moles of water + moles of ethanol

                                      = 8.085 mole + 2.6047 mole

                                      = 10.6897 mole

The term mole fraction is also known as molar fraction. It is defined as unit of the amount of a constituent divided by the total amount of all constituents in a mixture.

Mole fraction of water = moles of water ÷ Total number of moles

                                     = 8.085 mole ÷  10.6897 mole

                                     = 0.756335

                                     = 0.7564 mole approximately.

To learn more about Mole fraction

https://brainly.com/question/14783710

#SPJ4

Answer:

To answer this question, one must first understand the stoichiometric equation for this particular reaction. The equation states that for each one mole of calcium hydroxide (Ca(OH)2) that reacts with one mole of hydrofloric acid (HF), one mole of calcium fluoride (CaF2) and one mole of water (HOH) is produced. Therefore, if 0.5 moles of hydrofloric acid are reacted with the calcium hydroxide, then 0.5 moles of calcium fluoride will be produced.

To calculate the mass of calcium fluoride that will be produced, one must first look up the atomic mass of both calcium and fluorine and multiply them by the number of moles of each that are present in the reaction. In this case, the atomic mass of calcium is 40.08 and the atomic mass of fluorine is 19. Therefore, the mass of calcium fluoride that will be produced is equal to (40.08 x 0.5) + (19 x 0.5) = 29.54 g.

In conclusion, if 0.5 moles of hydrofloric acid are reacted with calcium hydroxide, then a mass of 29.54 g of calcium fluoride will be produced.

Answer:

The balanced chemical equation for the combustion of methane (CH4) with oxygen (O2) is:

CH4 + 2O2 → CO2 + 2H2O

This equation tells us that for every mole of methane that reacts, we get 2 moles of water produced. So, for 3 moles of methane, we would get:

3 moles CH4 × (2 moles H2O / 1 mole CH4) = 6 moles H2O

Now we need to convert moles of water to mass. The molar mass of water (H2O) is 18.015 g/mol. So, the mass of water produced is:

6 moles H2O × 18.015 g/mol = 108.09 g

Therefore, if 3 moles of methane reacts with oxygen to produce carbon dioxide and water, 108.09 g of water is produced.

Explanation:

If the pressure contributed by CH4 is 111.2 atm, the pressure due to NH3 would be 109.1 atm.

To solve the problem, we can use the ideal gas law equation:

PV = nRT

where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is temperature.

We need to find the pressure due to NH3, so let's start by finding the number of moles of each gas:

Now, we can use the pressure contributed by CH4 to find the total pressure:

Ptotal = PCH4 + PNH3

111.2 atm = PCH4 + PNH3

Finally, we can solve for the pressure due to NH3:

Therefore, the pressure due to NH3 is 109.1 atm.

More on pressure can be found here: https://brainly.com/question/12977546

#SPJ1

Answer:

Explanation:

λν = c

Wavelength, λ (lambda), times frequency, ν (nu), equals the speed of light.

c = 3.0 x 108 m/s

===

We are given a wavelength of 483 nanometers.  1 nanometer = 1x10^-9 meter.   483nm = 4.83x10^-7 meters

---

λν = c

ν = c/λ

ν = (3.0x10^8 m/s)/(4.83x10^-7 m)

ν = 6.21x10^14 Hz  (1/s)

The factor that is most sensitive to changes in temperature is the fraction of molecules with energy greater than the activation energy.

The statement that best represents the effect of temperature on reaction rates is called the Arrhenius equation. It is expressed as [tex]k = Ae^{-Ea/RT},[/tex]

where k is the rate constant,

A is the pre-exponential factor or frequency factor,

Ea is the activation energy,

R is the gas constant, and T is the absolute temperature.

At high temperatures, the reaction rate increases, and at low temperatures, the reaction rate decreases.

The Arrhenius equation shows that the rate constant depends on two factors:

the activation energy and the fraction of molecules with energy greater than the activation energy.

Thus, the most sensitive factor to changes in temperature is the fraction of molecules with energy greater than the activation energy.

To learn more about Activation energy refer: https://brainly.com/question/28384644

#SPJ11

The mass of methane (CH4) must be burned to give 1575 kJ of energy is 28.4 g.

The first step is to determine the number of moles of methane required to produce 1575 kJ of energy. We can do this using the conversion factor provided:

891 kJ of energy is produced by 1 mole of methane (CH4)

1575 kJ of energy is produced by how many moles of methane?

1575 kJ / 891 kJ/mol = 1.77 mol

Next, we can use the molar mass of methane to convert it from moles to grams:

Molar mass of methane = 12.01 g/mol (for carbon) + 4 x 1.01 g/mol (for hydrogen) = 16.05 g/mol

Mass of methane = number of moles x molar mass

Mass of methane = 1.77 mol x 16.05 g/mol = 28.4 g

Therefore, 28.4 g of methane must be burned to produce 1575 kJ of energy.

Learn more about the mass of methane at

https://brainly.com/question/17756207

#SPJ4

Answer:

A. The acidic concentration of a solution can be determined by titrating with a strong base. You calculate the number of moles of strong base required to reach the equivalence point of the titration. Then, using the mole ratio from the balanced neutralization equation, convert from moles of strong base to moles of acid. [source, Khan Academy]

B. The endpoint is reached in a titration when the indicator used changes color (i.e, pink).

Explanation:

For B, if you do it correctly, the equivalence point is eventually reached and this is signified by the change in color of the indicator in the analyte solution.

The depth range of the epilimnion in this lake is most likely a. 0 to 3 meters. Option A is correct.

To determine the depth range of the epilimnion, we need to identify the layer of the lake where the temperature change is most rapid, which indicates the transition between the warm surface layer and the colder deep layer.

Looking at the temperature readings, we can see that there is a significant temperature difference between the surface layer (0-3 meters) and the layer below (4-7 meters).

However, the temperature change between 4-7 meters and 8-12 meters is not as dramatic, indicating that the transition between the warm surface layer and the colder deep layer occurs somewhere between 3 and 8 meters.

Hence, A. 0 to 3 is the correct option.

To know more about depth range here

https://brainly.com/question/29103133

#SPJ4

The amount of heat transferred would be -8.85 kJ.

To calculate the heat transferred, we need to first determine the limiting reactant, which is the reactant that is completely consumed in the reaction. This will determine the amount of product that can be formed and hence the amount of heat released.

We start by calculating the moles of sulfur and oxygen:

Moles of sulfur = 0.54 g / 32.06 g/mol = 0.0168 mol

Moles of oxygen = 0.54 g / 31.998 g/mol = 0.0169 mol

The balanced equation shows that 2 moles of sulfur react with 3 moles of oxygen to produce 2 moles of sulfur trioxide. So, the ratio of moles of sulfur to oxygen in the reaction is 2:3. Since the ratio of moles of sulfur to oxygen in the reactants is less than 2:3, oxygen is the limiting reactant.

The amount of sulfur trioxide produced can be calculated using the mole ratio from the balanced equation:

Moles of sulfur trioxide produced = 0.0169 mol * (2 mol SO3 / 3 mol O2) = 0.0112 mol

The heat transferred in the reaction can be calculated using the heat of reaction per mole of sulfur trioxide:

Heat transferred = 0.0112 mol * (-790 kJ/mol) = -8.85 kJ

More on heat transfer can be found here: https://brainly.com/question/13433948

#SPJ1

Answer:

Thermal energy is the sum of the kinetic and potential energy of all the atoms in an object or substance.

(This statement is true for ideal gases, but for solids and liquids, thermal energy also includes the energy associated with intermolecular forces.)

Carbon NMR spectroscopy is a powerful analytical tool for determining the number of unique carbons present in a molecule, as well as their respective chemical environments. By analyzing the quartet, doublet, and singlet peaks, scientists can identify unique carbon environments and the associated chemical structure of the molecule.

Carbon NMR spectroscopy produces a spectrum of signals that represent the unique chemical environment of each carbon atom in a molecule. The number of carbon signals in the spectrum corresponds to the number of carbons in the molecule, meaning all carbons will be detected in the NMR spectrum. In most carbon NMR spectra, the carbon signals appear as quartet, doublet, and singlet peaks, each of which represent different types of carbon environments.

For example, consider the structure of toluene. CH3 peaks. The methyl peak will appear further upfield than the carbons of the ring. This is because the methyl group has a more electronegative environment than the ring carbons due to the three hydrogens that are attached to the carbon, resulting in a higher electron density. As a result, the methyl peak will appear further upfield than the carbons of the ring.

Know more about NMR spectroscopy here:

https://brainly.com/question/28523860

#SPJ11

The concentration of the solution is 7.02 × 10⁻⁴ mol/L.

The Beer-Lambert law or Beer's law states that the amount of light absorbed by a solution is directly proportional to the concentration of the absorbing material in the solution, the path length, and the absorption coefficient.

According to Beer's law,

A = εcl

where A is the absorbance, ε is the molar absorptivity, c is the concentration, and l is the path length.

Let's find the concentration of the solution from the given data using Beer's law.

A = εcl

0.929 = ε × c × l

Let's find the molar absorptivity (ε) from the data given.

Experimental beer's law for copper(ii) ions in solution at 814 nm was determined to be

ε = 1.32 × 10³ mol⁻¹ L cm⁻¹

From the data given, the path length is not mentioned.

Let's consider the path length as 1 cm.

So, l = 1 cm.

0.929 = (1.32 × 10³ mol⁻¹ L cm⁻¹) × c × 1 cmc

= 0.929/1.32 × 10³ mol/L

= 7.02 × 10⁻⁴ mol/L

The concentration of the solution is 7.02 × 10⁻⁴ mol/L.

To learn more about The Beer-Lambert law refer to:

https://brainly.com/question/30404288

#SPJ11

We can determine the equilibrium concentration when we are given the initial concentration and reaction of an acid or base. In the given reaction,

HA is an acid that dissociates in water to form its conjugate base A− and a hydronium ion H3O+.

HA(aq) + H2O(l) ⇌ A−(aq) + H3O+(aq)

For any weak acid, the dissociation constant is defined as follows:

Ka = [A−][H3O+]/[HA]

We can determine the equilibrium concentration from the above formula by using the initial concentration.

Let’s consider a weak acid HA with an initial concentration of [HA]0.

It will form [A−] and [H3O+] at equilibrium.

If the degree of dissociation of the acid is x, then the concentration of [H3O+] at equilibrium will be [H3O+] = x, and the concentration of [A−] will be [A−] = x. And the concentration of [HA] at equilibrium will be [HA] = [HA]0 − x.

So, we can write the equilibrium expression for the dissociation of HA as:

Ka = [A−][H3O+]/[HA]Ka = x * x/([HA]0 − x)

By solving the above equation, we can obtain the value of x, which is the degree of dissociation of the acid.

At equilibrium, the equilibrium concentration of HA is [HA] = [HA]0 − x. The equilibrium concentration of A− is [A−] = x. The equilibrium concentration of H3O+ is [H3O+] = x. Thus, we can determine the equilibrium concentration from the initial concentration of a weak acid or base without using the equilibrium constant Kc.

#SPJ11

Learn more about equilibrium: What is true of a reaction that has reached equilibrium? https://brainly.com/question/2051941

The forward reaction for Reaction B is endothermic, as indicated by the negative change in enthalpy (-91 kJ/mol) for the forward reaction.

If Reaction B was at equilibrium and then was heated, the amount of CH₃OH would be less after the reaction adjusts to the new temperature. This is because the forward reaction is endothermic, meaning that an increase in temperature would shift the equilibrium towards the reactants side to counteract the increase in temperature.

If the pressure in the container of Reaction B was increased, the amount of CH₃OH would be more after the reaction adjusts to the new pressure. This is because the forward reaction produces fewer moles of gas than the reverse reaction, so increasing the pressure would shift the equilibrium towards the side with fewer moles of gas (the products side) to counteract the increase in pressure.

If H₂ was added to Reaction B at equilibrium, the amount of CH₃OH would be more after the reaction adjusts. This is because H₂ is a reactant in the reverse reaction, so adding more H₂ would shift the equilibrium towards the products side to counteract the increase in H₂.

If H₂ was added to Reaction B at equilibrium, the amount of CO would be less after the reaction adjusts. This is because CO is a product in the forward reaction, so adding more H₂ would shift the equilibrium towards the products side to counteract the increase in H₂, resulting in a decrease in CO.

To learn more about endothermic refer to:

brainly.com/question/23184814

#SPJ4

The molarity of Tylenol is 0.21 M, rounded to two significant figures. Hence, the correct option is (B) i.e. 0.21 M.

To find the molarity of Tylenol, we need to know the number of moles of acetaminophen present in 5 mL of medicine.

First, let's calculate the molecular weight of acetaminophen:

C = 12.011 g/mol x 8 = 96.088 g/mol

H = 1.008 g/mol x 9 = 9.072 g/mol

N = 14.007 g/mol x 1 = 14.007 g/mol

O = 15.999 g/mol x 2 = 31.998 g/mol

Total molecular weight = 96.088 g/mol + 9.072 g/mol + 14.007 g/mol + 31.998 g/mol = 151.165 g/mol

Next, we can use the given mass of acetaminophen in 5 mL of medicine to calculate the number of moles:

0.16 g acetaminophen x (1 mol / 151.165 g) = 0.001058 mol

Finally, we can use the definition of molarity to calculate the molarity of Tylenol:

Molarity = moles of solute / volume of solution in liters

Since we have 0.001058 moles of acetaminophen in 5 mL of medicine, which is equivalent to 0.005 L of solution, we can calculate the molarity as:

Molarity = 0.001058 mol / 0.005 L = 0.2116 M

To know more about molarity please refer: brainly.com/question/8732513

#SPJ1

Answer: True

Explanation: Chadwick, a British physicist, worked to isolate the neutral particle that Rutherford had proposed.  This particle, known as the neutron, was hypothesized by Rutherford to exist within atomic nuclei. In 1932, Chadwick successfully conducted experiments that confirmed the existence of the neutron and provided evidence for its role in nuclear structure.

Rutherford's model of the atom suggested that the nucleus contains positively charged protons and that electrons orbit around it. However, this model could not explain why the positively charged protons did not repel each other and cause the nucleus to break apart. Rutherford proposed the existence of neutral particles, later identified as neutrons, to account for the stability of the atomic nucleus.

Chadwick's work involved bombarding various elements with alpha particles and observing the resulting radiation. Through careful experimentation, he was able to demonstrate that the radiation consisted of neutrons, which had the ability to penetrate and interact with atomic nuclei without being deflected by electromagnetic forces. This discovery revolutionized our understanding of atomic structure and paved the way for further advancements in nuclear physics.

Learn more about James Chadwick here: https://brainly.com/question/11833036.

Answer:

True

Explanation:

I answered so the person who answered first can get branliest!

Answer:

Based on the given scenario, Hodah's leadership style can be described as a transactional theory. This theory suggests that leaders provide rewards or punishments based on the performance of their followers. In this case, Hodah has devised a bonus system to motivate the sales team to perform better by providing them with incentives such as gift cards for every new client and pallets of paper sold. This approach focuses on providing rewards to motivate and improve performance.

The number of chlorine atoms present in 2 molecules of CCl₄ is 4.82×10²⁴ atoms

We'll begin by obtaining the mole of chlorine, Cl present in 2 molecules of CCl₄. This is shown below:

1 molecule of CCl₄ contains 4 moles of Cl

Therefore,

2 molecule of CCl₄ will contain = 2 × 4 = 8 moles of Cl

Finally, we shall determine the number of chlorine atoms present in the compound. Details below:

1 mole of Cl = 6.02×10²³ atoms

Therefore,

8 moles of Cl = (8 mole × 6.02×10²³ atoms) / 1 mole

8.1 moles of Li = 4.82×10²⁴ atoms

Thus, we can conclude that the number of chlorine atoms is 4.82×10²⁴ atoms

Learn more about number of atoms:

brainly.com/question/15488332

#SPJ1

Complete question:

How many chlorine atoms are there in 2 molecules of CCl₄