Maggie spent $18. 00 Of $30. 00 In her wallet which decimal represents the fraction of the $30. 00 Maggie spent

Step-by-step explanation:

+ 1.25

every new term is the previous term + 1.25.

with starting value -1.75

f(n) = 1.25n - 1.75

Answer: C. experimental study.

Experimental studies are used to establish cause-and-effect relationships between variables by manipulating one variable (independent variable) and observing the effect on another variable (dependent variable) while controlling for other potential factors. Correlational studies examine the relationship between two variables but do not establish causality, descriptive studies describe a phenomenon without manipulating variables, and meta-analysis is a statistical method that combines the results of multiple studies to provide an overall summary.

Step-by-step explanation:

Thus, the value of x for the given angle of cyclic quadrilateral is found as the x = 50.

When you hear the word "cyclic," think of the two round wheels on you bicycle. A quadrilateral is a figure with four sides. The result is a cyclic quadrilateral, which is defined as any four-sided shape (quadrilateral) its four vertices (corners) are located on a circle.

A cyclic quadrilateral's opposite angles add up to 180 degrees, making them supplementary to one another.

Given data:

Using the property of cyclic quadrilateral: sum of opposite angle are 180 degrees.

∠T + ∠R = 180

x + 60 + x + 20 = 180

2x + 80 = 180

2x = 180 - 80

2x = 100

x = 50

Thus, the value of x for the given angle of cyclic quadrilateral is found as the x = 50.

Know more about the cyclic quadrilateral:

https://brainly.com/question/27585352

#SPJ1

It depends on the rotational speed of the wheel. To calculate this speed, we need to know the angular velocity of the wheel.

The maximum speed of a point on the outside of the wheel, 15 cm from the axle, if we assume that the wheel is rotating at a constant rate, we can use the formula v = rω, where v is the speed of the point on the outside of the wheel, r is the radius of the wheel (15 cm in this case), and ω is the angular velocity of the wheel. Therefore, the maximum speed of a point on the outside of the wheel would be directly proportional to the angular velocity of the wheel.
The formula to calculate the maximum linear speed (v) is:
v = ω × r
where v is the linear speed, ω is the angular velocity in radians per second, and r is the distance from the axle (15 cm, or 0.15 meters in this case).
Once you have the angular velocity (ω) of the wheel, you can plug it into the formula and find the maximum speed of a point on the outside of the wheel.

Learn more about rotational speed here: brainly.com/question/17025846

#SPJ11

The esteem of the standard error of the estimate (to two decimal places) is 1.34.

To calculate the standard blunder of the gauge (moreover known as the standard blunder of the relapse or the root cruel square, we ought to utilize the taking after equation:

SE = sqrt [ (Σ(y - yhat)[tex]^{2}[/tex]) / (n - k) ]

yhat = 0.471x + 2.606

We too know that there are 5 perceptions, and there's one free variable (x). Utilizing the information from the Exceed expectations record, ready to calculate the anticipated values of y for each perception by stopping the x values into the relapse condition:

yhat1 = 2.696

yhat2 = 3.638

yhat3 = 4.581

yhat4 = 5.524

yhat5 = 6.466

SE = sqrt [ ( (4.75 - 2.696)[tex]^{2}[/tex] + (5.36 - 3.638)[tex]^{2}[/tex]+ (5.95 - 4.581)[tex]^{2}[/tex] + (6.66 - 5.524)[tex]^{2}[/tex]+ (7.03 - 6.466)[tex]^{2}[/tex]) / (5 - 2) ]

SE = sqrt [ (5.3546) / 3 ]

SE = 1.335

To learn about standard error visit:

https://brainly.com/question/30667112

#SPJ4

Answer:

Jaxon made 11 free throws over the season.

Step-by-step explanation:

If he made 5% of his free throws, we know that he will make 5% of the total number of free throws he took, which is 220:

We multiply 220 by 0.05, or 5% to find out how many free throws he made:

220*0.05 = 11

After that, we now know that Jaxon made 11 of his free throws out of 220 over the course of the season, or 5%.

The number of balls that must be selected to ensure that 4 balls of the same color are chosen is 10 balls.

To ensure that 4 balls of the same color are chosen, we must consider the worst-case scenario where we select 3 balls of each color before selecting the fourth ball. Therefore, the minimum number of balls that must be selected is:

= 3 (red balls) + 3 (blue balls) + 3 (yellow balls) + 1 (any color)

= 10 balls.

Therefore, we must select at least 10 balls to ensure that 4 balls of the same color are chosen.

To know more about balls

https://brainly.com/question/19930452

#SPJ4

The length of chord XY is 5√2.

What is the length of the chord?

It is described as the line segment that connects any two points on the circle's circumference without going through the circle's center. As a result, the diameter is the chord of a particular circle that is the longest and goes through its center. In mathematics, determining the chord's length can be crucial at times.

Here, we have

Given: A circle with center O and radius 5 has a central angle XOY. X and Y are points on the circle. ​If the measure of arc XY is 90 degrees.

We have to find the length of chord XY.

∠XOY = 90°

OX = OY = 5

We draw a perpendicular from the center to chord XY bisect XY at D.

Now, since OD bisects ∠XOY

∠XOD = ∠YOD = 90°/2 = 45°

Now, in ΔXOD

sin45° = XD/OX

1/√2 = XD/5

5/√2  = XD...(1)

In ΔYOD

sin45° = YD/OY

5/√2  = YD...(2)

Adding (1) and (2), we get

XD + YD = 5/√2 + 5/√2

XY = 5√2

Hence, the length of chord XY is 5√2.

To learn more about the length of the chord from the given link

https://brainly.com/question/26094865

#SPJ1

The probability of picking one bolt and one nut is 1/2 or 50%.

To find the probability that one is a bolt and one is a nut, we need to use the formula for calculating the probability of two independent events happening together: P(A and B) = P(A) × P(B)

Let's first calculate the probability of picking a bolt from the box:

P(bolt) = number of bolts / total number of parts = 3/6 = 1/2

Now, let's calculate the probability of picking a nut from the box:

P(nut) = number of nuts / total number of parts = 3/6 = 1/2

Since the events are independent, the probability of picking a bolt and a nut in any order is:

P(bolt and nut) = P(bolt) × P(nut) + P(nut) × P(bolt)

P(bolt and nut) = (1/2) × (1/2) + (1/2) × (1/2)

P(bolt and nut) = 1/2

Therefore, the probability of picking one bolt and one nut is 1/2 or 50%.

Learn more about  probability

https://brainly.com/question/30034780

#SPJ4

the probability that one chosen part is a bolt and the other chosen part is a nut is 1, or 100%. This makes sense because if we choose two parts at random, we must get one bolt and one nut since there are three of each in the box.

To find the probability that one chosen part is a bolt and the other chosen part is a nut, we need to use the formula for probability:

Probability = (number of desired outcomes) / (total number of outcomes)

There are two ways we could choose one bolt and one nut: we could choose a bolt first and a nut second, or we could choose a nut first and a bolt second. Each of these choices corresponds to one desired outcome.

To find the number of ways to choose a bolt first and a nut second, we multiply the number of bolts (3) by the number of nuts (3), since there are 3 possible bolts and 3 possible nuts to choose from. This gives us 3 x 3 = 9 total outcomes.

Similarly, there are 3 x 3 = 9 total outcomes if we choose a nut first and a bolt second.

Therefore, the total number of desired outcomes is 9 + 9 = 18.

The total number of possible outcomes is the number of ways we could choose two parts from the box, which is the number of ways to choose 2 items from a set of 6 items. This is given by the formula:

Total outcomes = (6 choose 2) = (6! / (2! * 4!)) = 15

Putting it all together, we have:

Probability = (number of desired outcomes) / (total number of outcomes)
Probability = 18 / 15
Probability = 1.2

However, this answer doesn't make sense because probabilities should always be between 0 and 1. So we made a mistake somewhere. The mistake is that we double-counted some outcomes. For example, if we choose a bolt first and a nut second, this is the same as choosing a nut first and a bolt second, so we shouldn't count it twice.

To correct for this, we need to subtract the number of outcomes we double-counted. There are 3 outcomes that we double-counted: choosing two bolts, choosing two nuts, and choosing the same part twice (e.g. choosing the same bolt twice). So we need to subtract 3 from the total number of desired outcomes:

Number of desired outcomes = 18 - 3 = 15

Now we can calculate the correct probability:

Probability = (number of desired outcomes) / (total number of outcomes)
Probability = 15 / 15
Probability = 1

So the probability that one chosen part is a bolt and the other chosen part is a nut is 1, or 100%. This makes sense because if we choose two parts at random, we must get one bolt and one nut since there are three of each in the box.

learn more about probability

https://brainly.com/question/30034780

#SPJ11

Therefore , the solution of the given problem of unitary method comes out to be during the 4-second period, the tram's elevation changed by 3 metres every second.

To complete the assignment, use the iii . -and-true basic technique, the real variables, and any pertinent details gathered from basic and specialised questions. In response, customers might be given another opportunity to sample expression the products. If these changes don't take place, we will miss out on important gains in our knowledge of programmes.

Here,

By dividing the overall elevation change (12 metres) by the total time required (4 seconds),

it is possible to determine the change in the tram's elevation every second. We would then have the average rate of elevation change per second.

=> Elevation change equals 12 metres

=> Total duration: 4 seconds

=>  12 meters / 4 seconds

=> 3 meters/second

As a result, during the 4-second period, the tram's elevation changed by 3 metres every second.

To know more about unitary method  visit:

https://brainly.com/question/28276953

#SPJ1  

The probability that Julian will roll a 3 on the next roll is approximately 16.67%. The probability of rolling a 3 on a normal 6-sided die is independent of the previous rolls. This means that regardless of the outcomes of Julian's previous rolls, the probability remains the same.

Explanation

On a 6-sided die, there is 1 favorable outcome for rolling a 3 (the number 3 itself) out of 6 possible outcomes (1, 2, 3, 4, 5, and 6).

To find the probability, you can use the formula:

Probability = (Number of favorable outcomes) / (Total number of outcomes)

In this case:

Probability of rolling a 3 = 1 (favorable outcome) / 6 (total outcomes)

Probability of rolling a 3 = 1/6 ≈ 0.1667 or 16.67%

So, the probability that Julian will roll a 3 on the next roll is approximately 16.67%.

To learn more about probability : brainly.com/question/27292589

#SPJ11

Answer:

a 1053

b 250

multiply 650 by 1.62 for part a.

for part b divide by 1.62 since pound is less than dollar

hope this helps :)

The logical assumption used is: An arithmetic sequence is a set of discrete values, whereas a line is a continuous set of values.

An arithmetic sequence is a set of numbers where, with the exception of the first term, each term is obtained by adding a fixed constant to the term before it. Every pair of following terms in the sequence has the same fixed constant, which is known as the common difference. A1 stands for the first term in an arithmetic sequence, while an is used to represent the nth term.

A solid line symbolises continuous numbers, whereas the classmate's logical presumption is that an arithmetic series comprises of discrete values. This presumption is untrue, though, as a line can effectively represent an arithmetic series.

Learn more about arithmetic sequence here:

https://brainly.com/question/29616017

#SPJ1

The distance traveling between them is increasing at a rate of miles per hour = 45 m/h.

The distance between the automobile and the farmhouse is increasing by 45 mph, since the automobile is traveling at this speed.

When the automobile is 9 miles past the intersection of the highway and the road, the distance between the automobile and the farmhouse is increasing at a rate of 45 mph, due to the automobile traveling at this speed.

When the automobile is 9 miles past the intersection of the highway and the road, the distance between the automobile and the farmhouse is increasing at a rate.

So,

The rate at which the distance between the automobile and the farmhouse is increasing when the automobile is 9 miles past the intersection is 45 mph.

For similar question on distance traveling:

brainly.com/question/509450

#SPJ11

For the relevant range of production of units total amount of product and period cost as per units are,

Total amount of product costs for 29,250 units is $687,375.

Total amount of period costs incurred for 29,250 units is $58,511.50

Total amount of product costs for 33,500 units is equal to $787,250.

Total amount of period costs for 25,000 units  is equal to $50,011.50.

Average Cost per Unit Direct materials  = $ 8. 50

Direct labor = $ 5. 50

Variable manufacturing overhead = $ 3. 00

Fixed manufacturing overhead = $ 6. 50

Fixed selling expense  = $ 5. 00

Fixed administrative expense = $ 4. 00

Sales commissions = $ 2. 50

Variable administrative expense = $ 2. 00

Total unit produced = 29,250 units,

Total product costs

= (Direct materials + Direct labor + Variable manufacturing overhead + Fixed manufacturing overhead) x Number of units produced

= ($8.50 + $5.50 + $3.00 + $6.50) x 29,250

= $23.50 x 29,250

= $687,375

The total amount of product costs incurred to make 29,250 units is $687,375.

Total period costs

= Fixed selling expense + Fixed administrative expense + Sales commissions + (Variable administrative expense x Number of units sold)

= $5.00 + $4.00 + $2.50 + ($2.00 x 29,250)

= $5.00 + $4.00 + $2.50 + $58,500

= $58,511.50

The total amount of period costs incurred to sell 29,250 units is $58,511.50

For the number of units produced changed to 33,500.

Total product costs

= (Direct materials + Direct labor + Variable manufacturing overhead + Fixed manufacturing overhead) x Number of units produced

= ($8.50 + $5.50 + $3.00 + $6.50) x 33,500

= $23.50 x 33,500

= $787,250

The total amount of product costs incurred to make 33,500 units is $787,250.

The number of units sold changed to 25,000.

Total period costs

= Fixed selling expense + Fixed administrative expense + Sales commissions + (Variable administrative expense x Number of units sold)

= $5.00 + $4.00 + $2.50 + ($2.00 x 25,000)

= $5.00 + $4.00 + $2.50 + $50,000

= $50,011.50

The total amount of period costs incurred to sell 25,000 units is $50,011.50.

Therefore, the total amount of the product and period cost for different situations are,

Total amount of product costs is equal to $687,375.

Total amount of period costs incurred is equal to $58,511.50

Total amount of product costs is equal to $787,250.

Total amount of period costs is equal to $50,011.50.

learn more about cost here

brainly.com/question/17927959

#SPJ4

Step-by-step explanation:

Again, using similar triangle ratios

7.2 m  is to 2.4 m  

     as   AB is to  12.0 m

7.2 / 2.4  = AB/12.0    Multiply both sides of the equation by 12

12 *   7.2 / 2.4   = AB = 36.0 meters

The profit function of the company is given by P(x)=-4x^3 + 32x^2 - 64, where x is the number of toys sold in hundreds, and P(x) is the profit in thousands of dollars.

The key features of the graph of the profit function are the following:

The degree of the polynomial function is 3, which means that the graph is a cubic curve.

The coefficient of the leading term is negative (-4), which means that the graph opens downwards.

The coefficient of the quadratic term is positive (32), which means that the graph is concave up.

The y-intercept of the graph is -64, which means that the company will incur a loss of $64,000 if it does not sell any toys.

It should be noted that to find the maximum profit, we need to evaluate the profit function at x = 5.33:

P(5.33) = -4(5.33)^3 + 32(5.33)^2 - 64 = 23.78

Therefore, the maximum profit that the company can make is $23,780.

In summary, the graph of the profit function reveals that the company will incur a loss if it does not sell any toys, but it can make a profit if it sells at least some toys. The profit function has a cubic shape that opens downwards, indicating that the profit decreases as the number of toys sold increases beyond a certain point. The maximum profit occurs at x = 5.33, where the profit is $23,780.

Learn more about graph on;

https://brainly.com/question/19040584

#SPJ1

Since cosine is negative and a is in quadrant III, we know that sine is positive. We can use the Pythagorean identity to solve for sine:

sin^2(a) + cos^2(a) = 1

sin^2(a) + (-5/9)^2 = 1

sin^2(a) = 1 - (-5/9)^2

sin^2(a) = 1 - 25/81

sin^2(a) = 56/81

Taking the square root of both sides:

sin(a) = ±sqrt(56/81)

Since a is in quadrant III, sin(a) is positive. Therefore:

sin(a) = sqrt(56/81) = (2/3)sqrt(14)

Rounding the result off to the nearest 10th, the lateral surface area of the cylinder is 822 inches².

Surface area is the total area of the exposed surfaces of a three-dimensional object. It is measured in square units such as square centimeters (cm2) or square meters (m2). Surface area is an important concept in mathematics, science, and engineering, as it is the total area that determines properties such as friction, heat transfer, and fluid dynamics. For example, a larger surface area can increase the rate of heat transfer and allow for more efficient cooling. Similarly, a larger surface area can increase the friction between two objects, allowing them to grip better. Surface area is also important in chemistry, as it affects the amount of gas or liquid that can be absorbed or released by a given object.

The cylinder has a radius of 11 inches and a height of 12.5 inches. To find the lateral surface area of a cylinder, the formula used is A = 2πrℎ, where r is the radius and h is the height of the cylinder. After plugging in the values, the lateral surface area of the cylinder is 821.75 inches². Rounding the result off to the nearest 10th, the lateral surface area of the cylinder is 822 inches².

To know more about surface area click-
brainly.com/question/16519513
#SPJ1

Event "X or Y": A, B, C, E, G. Event "X and Y": C. The complement of event X: D, E, F, G.

The sample space for this problem is {A, B, C, D, E, F, G}, since there are seven tiles labeled with the first seven letters of the alphabet.

Event X: The letter selected comes before "D". Outcomes in this event are A, B, and C.

Event Y: The letter selected is found in the word "CAGE". Outcomes in this event are A, C, E, and G.

Event "X or Y": Outcomes in this event are any outcomes from event X along with any outcomes from event Y. So the outcomes in the event "X or Y" are A, B, C, E, and G.

Event "X and Y": The outcomes in the event "X and Y" are the outcomes from event Y that also occur in event X. So the only outcome in the event "X and Y" is C.

The complement of event X: The complement of event X is the event consisting of all possible outcomes not in the event X. So the outcomes in the complement of event X are D, E, F, and G.

To know more about complement of event:

https://brainly.com/question/30212841

#SPJ4

--The given question is incomplete, the complete question is given

" A tile is selected from seven tiles, each labeled with a different letter from the first seven letters of the alphabet. The letter selected will be recorded as the outcome. Consider the following events. Event X: The letter selected comes before "D". Event Y: The letter selected is found in the word "CAGE". Give the outcomes for each of the following events. If there is more than one element in the set, separate them with commas.

(a) Event "X or Y":

(b) Event "X and Y":

(c) The complement of the event X: "--

The two column proof is written as follows

Statement                                                           Reason

MA = XR                                           given (opposite sides of rectangle)

MK = AR                                           given (opposite sides of rectangle)

arc MA = arc RK                               Equal chords have equal arcs

arc MK = arc AK                               Equal chords have equal arcs

An arc is a portion of the circumference of a circle, and a chord is a line segment that connects two points on the circumference.

If two chords in a circle are equal in length, then they will cut off equal arcs on the circumference. This is because the arcs that the chords cut off are subtended by the same central angle.

Learn more on circle theorem at:

https://brainly.com/question/6240879

#SPJ1

Step-by-step explanation:

hope this will help you Thanks

Equation that represents the total number of minutes y Emily studied for the math exam is y = 40 +x.

We can represent the total number of minutes Emily studied for the math exam using the equation,

y = 40 + x

Here, 'y' represents the total number of minutes Emily studied for the math exam, '40' represents the number of minutes she studied in the morning, and 'x' represents the number of minutes she studied later that evening.

By adding the number of minutes studied in the morning to the number of minutes studied later that evening, we can calculate the total number of minutes Emily studied for the math exam.

To learn more about Equation here:

https://brainly.com/question/29147854

#SPJ4

Answer: there is only one number

Answer:

Solo hay un número primo que se puede escribir como suma de dos números primos y también como diferencia de dos números primos.

Espero haber ayudado :D

Answer:

1

Step-by-step explanation:

First of all we use the "law of sines"

to get the measure/length we need the opposing angle of it of the side, now in this case the missing side is x

and its opposing angle is missing so using common sense, the sum of angles in the triangle is 180°

180°=70°+51°+ x

x = 180°-121°

=59°

Using law of sines:

(sides are represented by small letters/capital letters are the angles)

a/sinA= b/sinB= c/sinC

We have one given side which is "9"

so,

9/sin70= x/sin59

doing the criss-cross method,

9×sin59=sin70×x

9×sin59/sin70=x

x=8.2 (answer 1)

I hope this was helpful <3

Answer:

see the images and explanation

Step-by-step explanation:

for the graph:

the domain 0 < x < 5

the range for each functions:

g(x) = 2x + 1

g(x) = y  ,   1 < y < 11

h(x) = 2x + 2 ,  2 < y < 12

The probability that the total shown on the two dice after they are rolled is greater than or equal to 8 is 1/9.

The current in the circuit when the resistance is 12 ohms is 40 amps.

What is fraction?

A fraction is a mathematical term that represents a part of a whole or a ratio between two quantities.

We can use the inverse proportionality formula to solve this problem, which states that:

current (in amps) x resistance (in ohms) = constant

Let's call this constant "k". We can use the information given in the problem to find k:

24 amps x 20 ohms = k

k = 480

Now we can use this constant to find the current when the resistance is 12 ohms:

current x 12 ohms = 480

current = 480 / 12

current = 40 amps

Therefore, the current in the circuit when the resistance is 12 ohms is 40 amps.

To learn more about fraction from the given link:

https://brainly.com/question/10354322

#SPJ1