make a claim about the length of time nitrogen spends in its reservoirs compared to the carbon cycle.

Answers

Answer 1

When compared to the carbon cycle, the nitrogen cycle has a longer residence time in its reservoirs. Nitrogen gas accounts for 78% of the Earth's atmosphere.

yet it is not commonly available in plant-usable forms. Nitrogen must first be transformed into a useable form, such as ammonia or nitrate, through the nitrogen fixation process. This process can occur naturally, such as by lightning or bacterial activity, or through human activities, such as fertilizer application. Nitrogen, once useful, may be taken up by plants and animals and eventually returned to the atmosphere via denitrification. Because the entire process might take decades to millennia, the nitrogen cycle is substantially slower than the carbon cycle. The polypeptide is a kind of protein. The The peptide bond also permits the polypeptide to be flexible, which is essential for its operation.The initial amino acid in a peptide is known as the N-terminal (NH2) residue, while the last amino acid is known as the C-termina.

learn more about  carbon here:

https://brainly.com/question/22530423

#SPJ4


Related Questions

a gas is compressed from a volume of 5.42 l to a volume of 2.75 l by an external pressure of 748 torr. which of the following correctly reflect the calculations required to determine the work done on/by the system (the gas)? select all that apply.

Answers

The one which correctly reflect the calculation required to find the work done is a) W = - P ΔV = 266 J

The initial volume = 5.42 L

The final volume = 2.75 L

The change in volume , ΔV = final volume - initial volume

                                              = 2.75 - 5.42

The change in volume , ΔV = - 2.67 L

The work done is expressed as :

Work done, W =  - P ΔV

where,

ΔV = - 2.67 L

P = 748 torr = 0.984 atm

W =  - P ΔV

W = - ( 0.98 × - 2.67 ) × 101.3 J  ( 1 atm ⋅L = 101.3 J )

W = 266 J

The work done is 266 J.

A gas is compressed from a volume of 5.42 l to a volume of 2.75 l by an external pressure of 748 torr. which of the following correctly reflect the calculations required to determine the work done on/by the system (the gas)? select all that apply.

a) W = - P ΔV = 266 J

b) W = + P ΔV = - 266 J

c) none of the above

d) both a and b

To learn more about work done here

https://brainly.com/question/14989524

#SPJ4

From the formula for calcium acetate,Ca(C2H3O2)2, calculatethe mass of carbon that can be obtained from 65.3 g of thecompound.

Answers

The mass of carbon that can be obtained from 65.3 g of the compound is 19.83 grams of carbon,

First, you should calculate the % of carbon in calcium acetate

% of carbon - (12.01 x 4)/(40.08+12.01 x 4+ 1.008 x 6+16x 4)

% of carbon-48.04/158.168 x 100%

% of carbon 30.37% In 65.3 g of compound,

there are 65.3 x 30.37% -19.83 grams of carbon.

What do you mean by compound?

A object created by joining several different elements or parts. Particularly: a separate substance created by the chemical fusion of two or more substances in a certain weight-to-volume ratio. a fresh antibiotic substance.

Learn more about Compound:

brainly.com/question/29162155

#SPJ4

A gas sample at a certain temperature has an initial volume of 5.345 L. What is the initial temperature of the sample if the volume and the temperature are changed to 4.345 L and 898.0 K, respectively? Assume that the pressure and the amount of the gas remain constant.

Answers

Answer:

1104 K

Explanation:

We can use Charles' Law: [tex]\frac{V_1}{T_1} = \frac{V_2}{T_2}[/tex]

Plugging in the numbers gives us the initial temperature to be 1104 K

Given the density of Au is 19.3 g/cm^{ 3} , determine the mass of gold in an ingot with the dimensions of 10. in x 4.00 in x 3.00 in. Give your answer as a number with correct sig figs only.

Answers

The mass of the gold with the density of 19.3 g/cm³ with dimensions of 10.0 in x 4.00 in x 3.00 in is 38,011.48 grams.

How to calculate mass?

The mass of a substance can be calculated from the density by using the following expression;

Density = mass ÷ volume

According to this question, the dimensions of gold is given as 10.0 in x 4.00 in x 3.00 in. The density of gold is 19.3 g/cm³.

Volume of gold = 10 × 4 × 3 = 120in³

120in³ is equivalent to 1966.45cm³

19.3g/cm³ = mass ÷ 1966.45cm³

mass = 19.3 × 1966.45

mass = 38,011.48 grams.

Learn more about mass at: https://brainly.com/question/10397467

#SPJ1

the linear order of amino acids (blank structure), with the varying properties of their side chains (or blank groups), determines what blank and blank structures will form to produce a protein. the resulting unique blank shapes of proteins are key to their specific and diverse functions.

Answers

The linear order of amino acids (primary structure), with the varying properties of their side chains (R groups), determines what secondary and tertiary structures will form to produce a protein. The resulting unique three-dimensional shapes of proteins are key to their specific and diverse functions.

Amino acids are the building blocks of proteins, and the order of their assembly is known as the primary structure.

Each amino acid has a side chain, or R group, that is composed of different atoms, giving each amino acid a unique property that affects the structure and function of the proteins they create.

Depending on the primary structure and the chemical characteristics of the side chains, proteins can assume a variety of secondary and tertiary structures. It is these unique three-dimensional shapes that enable proteins to carry out their specific and varied functions.

To learn more about amino acids, click here:

https://brainly.com/question/14583479

#SPJ4

Deduce the structure of a compound of molecular formula C4H9Br which exhibits the following 1H NMR spectrum.

Answers

The structure C₄H₉Br that is 2-bromo-2-methylpropane , exhibits the ¹H NMR is as follows :

                        CH₃

                          |

              CH₃ - CH - CH₃

                         |

                        Br

In the 2-bromo-2-methylpropnae molecule, all the 9 protons has the same chemical environment and  there no splitting of the ¹H NMR resonance.  All the protons are chemically equivalent, and they will have the same resonance frequency in the NMR.

In the molecule , 9 protons of the 2-bromo-2-methylpropane, as all the hydrogen atoms are having the same chemical environment. In the  the Chemical shift (a) of the 1.80 ppm on the ¹H NMR spectrum for the 2-bromo-2-methylpropane is present.

To learn more about ¹H NMR here

https://brainly.com/question/26461487

#SPJ4

Determine the empirical formula of each of the following compounds from the percent composition: a. 7.8% carbon and 92.2% chlorine b. 10.0% C c. 0.80% H, 89.1% Cl

Answers

The empirical formula of a compound with 7.8% carbon and 92.2% chlorine is CCl₄ and that of a compound with 10.0% C, 0.80% H and 89.1% Cl is CHCl₃.

In order to determine the empirical formula of the compounds, we have to divide the percentage by mass of each of the elements by their relative atomic masses and then divide them through the lowest ratio.

Carbon = 7.8%

7.8/12 = 0.65

Chlorine = 92.2%

92.2 / 35.5 = 2.59

Dividing by the lowest ratio,

Carbon  = 0.65/0.65 = 1

Chlorine = 2.59/0.65 = 3.98 ≅ 4

So the empirical formula is CCl₄.

Hydrogen = 0.80%

0.80/1 = 0.80

Chlorine = 89.1%

89.1/35.5 = 2.50

Carbon = 10.0%

10/12 = 0.83

Dividing by the lowest ratio,

Hydrogen = 0.80/0.80 = 1

Carbon = 0.83/0.80 = 1.03  ≅ 1

Chlorine = 2.50/0.80 = 3.1  ≅ 3

So the empirical formula is CHCl₃

To know more about empirical formula here

https://brainly.com/question/17409468

#SPJ4

The hottest temperature yet recorded in Phoenix, Arizona, was 122 O F on June 26, 1990. IVhat is that temperature in 0 C? In K?

Answers

The temperature in Celsius and kelvin is 50°C and 323.15 K.

The three most used temperature scales for usage in business, science, and daily life are Kelvin, Celsius, and Fahrenheit.

A scale in Kelvin is absolute. There are no degree symbols after its values, which begin at absolute zero.

Both Celsius and Fahrenheit are relative scales. The degree symbol is used to indicate Fahrenheit and Celsius temperatures.

Given the temperature is 122°F

Temperature in Celsius is -

⇒ C = (F - 32)/1.80

⇒ C = (122 - 32) / 1.80

⇒ C = 90 / 1.80

C = 50°C

Temperature in Kelvin is -

K = 5/9(F - 32) + 273.15

⇒ K = 5/9 (122 - 32) + 273.15

K = 323.15 K

To learn more about temperature in Celsius and kelvin from given link

https://brainly.com/question/13165448

#SPJ1

T/F rf values should be kept in the range of 0.2 to 0.8 for the most effective separation when more than one compound is present in the sample.

Answers

The statement is true that rf values should be kept in the range of 0.2 to 0.8

Polar compoundsPolar will have higher Rf values than nonpolar compounds under the same developing conditions. Rf values should be kept in the range of 0.2 to 0.8 for the most effective separation when more than one compound is present in the sample. The less polar the solvent, the higher the Rf value.The fastest moving spot has the highest Rf value. polar (fastest moving), and the spot with the lowest polar
 value is the most polar (slowest moving). Rf values are frequently used to compare a known and an unknown substances to determine if they are the same.

go through the given link below to know more about rf values:-

https://brainly.com/question/26639192

#SPJ4

the enthalpy of the overall reaction represented above can be determined by adding the enthalpies of reactions 1 and 2. which of the following could be reaction 2 ?

Answers

Most probably the reaction 2 could be A: "( 2NO(g)+O2(g)→2NO2(g) )".

Reaction 2 is the second step of the overall reaction, which is the formation of NO2 from NO and O2. The overall reaction is (2O3(g)+2NO(g)→2NO2(g) + 2O2(g) ).

From the given options, the best match for reaction 2 is  (NO(g) + O2(g) → 2NO2(g) ) because it is a balanced equation that forms 2 moles of NO2 from 1 mole of O2 and 1 m0le of NO. This is consistent with the balanced equation of the overall reaction, which forms 2 moles of NO2.

Option A: 2NO(g) + O2(g) → 2NO2(g) forms 2 moles of NO2 but it consumes 2 moles of NO which is not consistent with the overall reaction.

Option B: 5NO(g) + O2(g) → 3NO2(g) forms 3 moles of NO2 but it consumes 5 moles of NO, again this is not consistent with the overall reaction.

Option C: NO(g)+O2(g)→2NO2(g),  it is a balanced equation that forms 2 moles of NO2 from 1 mole of O2 and 1 m0le of NO.

Therefore, based on the information provided, the correct option for reaction 2 is C: NO(g) + O2(g) → 2NO2(g)

"

Complete question

Reachtion 1  = (2O2(g)→3O2(g) ).

Reachtion 2  = ?

Overall recation = (2O3(g)+2NO(g)→2NO2(g) + 2O2(g) ).

the enthalpy of the overall reaction represented above can be determined by adding the enthalpies of reactions 1 and 2. which of the following could be reaction 2 ?

A: 2NO(g)+O2(g)→2NO2(g)

B: 5NO(g)+O2(g)→3NO2(g)

C:  NO(g)+O2(g)→2NO2(g)

D: None

"

You can learn more about enthalpy  at

https://brainly.com/question/14047927

#SPJ4

An energy _____ is the change of energy from one form to another. An energy _____ is the movement of energy from one object to another.

Urgent, will mark Brainliest.

Answers

An energy conversion is the change of energy from one form to another. An energy transfer is the movement of energy from one object to another.

What is energy  conversion?

Energy is a property of matter that gives us the ability to move or do work. The process of converting energy from one form to another is called energy transformation or energy conversion.

Energy is transformed in someplace every minute of every day. Thermal, electrical, nuclear, electromagnetic, mechanical, chemical, and sound energy are just a few of the many distinct sources of energy.

Energy transfer is the act of moving energy from one location to another.

Learn more about energy at:

https://brainly.com/question/25959744

#SPJ1

would you expect the following compound to have a dipole moment? if the molecule has a dipole moment, specify its direction. select the single best answer.

Answers

The compound to have a dipole moment, the correct statement about the dipole moment is 4) The molecule has no dipole moment.

The molecule is  CF₄, carbon tetrafluoride. The bond between the C - F is the polar covalent bond because of the greater electronegativity difference between the C and the F atoms. Even though it has no dipole moment because of the geometry that is tetrahedral geometry. The all the C - F bonds are arrange in  such a manner that the dipole moment will cancel out each other.

Thus, the  CF₄ molecule has no dipole moment. The molecule is the non - polar molecule.

This question is in complete , the complete question is :

Would you expect the following compound to have a dipole moment? if the molecule has a dipole moment, specify its direction. select the single best answer.           CF₄

1) The dipole moment is oriented from the fluorine atom towards the carbon atom.

2)  The dipole moment is oriented from the carbon atom towards the fluorine atom.

3) The orientation cannot be determined.

4) The molecule has no dipole moment.

To learn more about dipole moment here

https://brainly.com/question/14701505

#SPJ4

A. The atomic number (Z) of an element is the number of protons in the nucleus of atoms of that element. Because the net charge on an atom is zero, the number of protons is equal to the number of electrons. Thus, the atomic number also gives the number of electrons in a neutral atom. The mass number (A) of an atom is the total number of nucleons (protons plus neutrons). Therefore, the number of neutrons in an atom can be found by subtraction:

Mass number – atomic number = number of neutrons

Atomic Number Mass Number Number of protons Number of neutrons Number of electrons Element Symbol
6 6
39 19
77 Xe
64 29
35 45

Answers

The Atomic Number, Mass Number, Number of protons, Number of neutrons, Number of electrons, Element, and Symbol is shown below:

Atomic Number = 6; Mass Number = 12; Number of protons = 6; Number of neutrons = 6; Number of electrons = 6; Element = Carbon, Symbol = CAtomic Number = 19; Mass Number = 39; Number of protons = 19; Number of neutrons = 20; Number of electrons = 19; Element = Potassium, Symbol = KAtomic Number = 54; Mass Number = 131; Number of protons = 54; Number of neutrons = 77; Number of electrons = 54; Element = Xenon, Symbol = XeAtomic Number = 29; Mass Number = 64; Number of protons = 29; Number of neutrons = 35; Number of electrons = 29; Element = Copper, Symbol = CuAtomic Number = 35; Mass Number = 80; Number of protons = 35; Number of neutrons = 45; Number of electrons = 35; Element = Bromine, Symbol = Br.

What is the atomic number of an element?

The atomic number of an element is the number of protons present in the nucleus of the atom of the element.

The mass number is the sum of the protons and neutrons in the nucleus of the atom of the element.

Learn more about atomic numbers at: https://brainly.com/question/11353462

#SPJ1

what is the formula of manganese which contains 50.48% oxygen? Ar (Mn) = 64.94

Answers

(Hint: Oxide is the result of combining Mn and O.) Mn (Mass of the element, in g) (assuming 100 g of compound) elements in moles The smallest moles or moles of an element Multiplier mathematical model O 1. 49.5 2. _50,5 3.

What is the empirical equation for a manganese oxide with a 49.5 manganese content?(Hint: Oxide is the result of combining Mn and O.) Mn (Mass of the element, in g) (assuming 100 g of compound) elements in moles The smallest moles or moles of an element Multiplier mathematical model O 1. 49.5 2. _50,5 3.The chemical having the formula MnO2 is known as manganese dioxide.By elemental manganese oxidation, When oxygen in the environment interacts with elemental manganese, MnO2 is the result. In nature, manganese is typically found as manganese dioxide since elemental manganese cannot exist due to this reaction.(Hint: Oxide is the result of combining Mn and O.) Mn (Mass of the element, in g) (assuming 100 g of compound) elements in moles The smallest moles or moles of an element Multiplier mathematical model O 1. 49.5 2. _50,5 3.              

To learn more about manganese dioxide refer to:

https://brainly.com/question/24387586

#SPJ1

write a balanced equation for the synthesis reaction that occurred in experiment 1. include physical states.

Answers

The equation NaCl + AgNO3 => AgCl + NaNO3 incorporates the physical states for the synthesis reaction that took place in experiment 1. Factors are denoted by symbols in chemical equations.

When two or more chemical equations combine in a synthesis reaction, the result is A + B AB. This form makes it easy to spot synthesis reactions because there are more reactants than products. When two or more reactants react, a larger compound is produced depending on the direction of the reaction and the physical characteristics of the reactants. In 1615, chemist Jean Beguin of France formulated the first chemical equation. Chemical processes are present everywhere, beginning with food metabolism.

Learn more about chemical equations here

https://brainly.com/question/30087623

#SPJ4

3. For the carbon in the structure shown, determine the followi
H
(a) Hybridization:
(b) Molecular shape_
(c) Number of electron domains:
(d) Bond Angle:

Answers

The carbon that is SP2 hybridized in the compound is carbon 4 (C4).

What is the hybridization?

When we talk about the hybridization of the carbon atom, we mean the fact that the orbitals that are in the carbon atom are mixed in such a way that the orbitals that have the appropriate energy to be able to participate in the chemical bonds are formed.

As such looking at the compound that we have been shown in the image, we can see that not all the carbon atoms would be at the same state of hybridization.

Learn more about hybridization:https://brainly.com/question/14140731

#SPJ1

control of metal-support interactions in heterogeneous catalysts to enhance activity and selectivity

Answers

Control of metal-support interactions (MSIs) in heterogeneous catalysts can enhance both activity and selectivity.

 

MSIs refer to the interactions between the metal catalyst and the support material it is placed on. By fine-tuning the MSIs, the activity of the catalyst can be increased by optimizing the distribution and dispersion of the metal particles. In addition, by controlling the MSIs, the selectivity of the catalyst can be improved, allowing for the production of specific products in a reaction. This is done by manipulating the electronic and geometric properties of the metal-support interface, which affect the adsorption and activation of reactant molecules.

In general, controlling MSIs is a powerful way to make heterogeneous catalysts work better.

Learn more about metal interactions here: brainly.com/question/19153185

#SPJ4

define each of the following as atomic element, molecular element, ionic compound, or molecular compound. h2s [ select ] xe [ select ] br2 [ select ] cacl2 [ select ] i2 [ select ] al2s3 [ select ] pb [ select ] no2

Answers

Xe and Pb are atomic elements. I₂ and Br₂ are molecular elements. CaCl₂ and Al₂S₃ are ionic compounds and NO₂ and H₂S are molecular compounds.

Atomic elements are the elements which cannot be broken down further and combine together to form molecules. Among the substances given to us, Xenon (Xe) and Lead (Pb) can be categorised as atomic elements. Molecular elements are formed when the same elements combine with each other. I₂ and Br₂ are molecular elements.

Ionic compounds are consist of ions bound together. CaCl₂ and Al₂S₃ are ionic compounds. Molecular compounds are formed up of two or more elements and NO₂ and H₂S are molecular compounds.

To know more about ionic compounds here

https://brainly.com/question/9167977

#SPJ4

The density of air at ordinary atmospheric pressure and 25 ∘C is 1.19 g/L. What is the mass of the air in a room that measures 14.5×16.5×6.0 ft?

Answers

Answer:

40,827.34 g

Explanation:

First find the volume of the room and then multiply it by the density of air at ordinary atmospheric pressure and 25 ∘C.

In this case, the room has a length of 14.5 ft, a width of 16.5 ft, and a height of 6.0 ft.

volume = 14.5 ft x 16.5 ft x 6.0 ft = 1209.25 ft^3

To convert ft^3 to L, we can use the conversion factor 1ft^3 = 28.316846592 L

1209.25 ft^3 = 1209.25 * 28.316846592 = 34,416.99 L

Calculate the mass of the air in the room by multiplying the volume of the room by the density of air:

mass = 34,416.99 L x 1.19 g/L = 40,827.34 g

So, the mass of the air in the room is 40,827.34 g

Consider the composition. information from the SDS. What is a possible name of this compound?

A. Glycine
B. Glycol
C. Glycogen
D. Glycerol​

Answers

Answer: B

Explanation:

x consists of a flexible container with eight particles of a gas as shown. what happens to the pressure of the system when x is converted to the representations in (a), (b), and (c)?

Answers

When a gas is heated in a flexible container with constant pressure, the statement "The gas particles travel quicker" is accurate.

option (C)

The container's walls are struck more forcefully by the gas particles inside the container.

(a) Gas molecules lack a fixed form and a fixed volume. They grow till they fill their container. Gas molecules move readily both inside and outside of the container because they are fluid. Unless compressed, gas molecules are not very dense.

(b) Gas molecules mix and disperse as they diffuse and effuse (travel through small holes).

(c) The container's walls are struck more forcefully by the gas particles inside the container. The gas container's capacity expands as a result of the impact.

The gas container's capacity expands as a result of the impact. Gas molecule characteristics

To know more about flexible on

https://brainly.com/question/29820966

#SPJ4

The complete  question follows

x consists of a flexible container with eight particles of a gas as shown. what happens to the pressure of the system when x is converted to the representations in (a), (b), and (c)?

(a) pressure increased

(b) pressure decreased

(c) pressure is constant

In which of the following intermolecular interactions will polar molecules, such as water, commonly participate? (Mark all that apply A. Hydrogen bonding with non-polar molecules B. Hydrogen bonding with polar molecules C. Van der Waal interaction with polar molecules D. Electrostatic interaction with lonic compounds

Answers

B. Hydrogen bonding with polar molecules is the  inter molecular interactions will water participate commonly with polar molecules.

Why does water pull polar molecules toward it?

Polarity causes the water molecules to attract each other. Water is polar despite possessing a zero net charge because of the structure of its molecules. The molecule's hydrogen ends are positive, and its oxygen ends are negative. Water molecules are attracted to other polar molecules and to one another as a result.

What polar molecules are drawn to water?

The polarity of water enables hydrogen bonds to form whenever adjacent water molecules are drawn to each other by their opposing charges. Other polar molecules and ions, such as many biomolecules including sugars, nucleic acids, and certain amino acids, are also attracted to or attracted by water.

Learn more about polar molecule here:

brainly.com/question/15173422

#SPJ4

What is the correct reading of the volume in the pictured buret? Make sure to report your reading with the appropriate significant figures. Select one: a. 39.9 mL b. 39.5 mL c. 40.0 mL d. 39.950 mL e. 39.95 mL f. 40.05 mL

Answers

The correct reading of the volume in the pictured burette is e) 39.95 mL. The picture is attached below.

The purpose of the burette reading is to show that how much the solution has been dispensed, not the how much the burette contains. As compared to the volumetric glassware, the zero scale on the burette is written on the top. The Measurement scale on the burette is at the 1.0 intervals.

The intervals can be calculated as :

Intervals = (larger value - small value) / 2

Intervals = 1

The reading will be 39.95 mL.

Thus, according to the picture of the burette, the reading of the burette is the 39.95 mL.

To learn more about burette here

https://brainly.com/question/28145960

#SPJ4

you want to determine the heat of reaction when a sodium chloride solution is formed using a 10.0 g sample of nacl(s) and 50.0 ml of water in a coffee cup calorimeter. which of the following equations would you use? assume the specific heat of the solution is the same as the specific heat of water.

Answers

The heat of reaction when a sodium chloride solution is formed using a 10.0 g sample of NaCl(s) and 50.0 ml of water in a coffee cup calorimeter. The equation is :

E. q = ((60.0 g)(4.18 J/g K)(T f - T i))/(10.0 g/(58.44 g/mol))

Given that :

The mass of the NaCl = 10 g

The volume of sample = 50 mL

The molar heat of the reaction for NaCl ( sodium chloride ) = + 3.9 kJ/mol

The equation for the heat is given as :

q = m c ΔT

Where,

q = heat energy

m = mass

c = specific heat capacity

ΔT = change in temperature

Therefore the equation is given as :

q = m c ΔT

q = ( 50 g + 10 g) (4.184 J/g °C) (T f - T i)

q / mol = q water / mol NaCl

q = ((60.0 g)(4.18 J/g K)(T f - T i)) / (10.0 g/(58.44 g/mol))

The given question is incomplete, the complete question is :

You want to determine the molar heat of solution of sodium chloride using a 10.0 g sample of NaCl(aq) and 50.0 mL of water in a coffee cup calorimeter. Which of the following equations would you use? Assume the specific heat of the solution is the same as the specific heat of water.

A. q = (50.0 g)(4.18 J/g K)(T i - T f)

B. q = ((10.0 g)(4.18 J/g K)(T f - T i))/(10.0 g/(58.44 g/mol))

C. q = (60.0 g)(4.18 J/g K)(T f - T i)

D. q = (60.0 g)(4.18 J/g K)(T i - T f)

E. q = ((60.0 g)(4.18 J/g K)(T f - T i))/(10.0 g/(58.44 g/mol))

To learn more about heat here

https://brainly.com/question/16267186

#SPJ4

Calculate the number of grams of sulfuric acid in 1 gallon of battery acid if the solution has a density of 1.31 g/ml and is 38.7 % sulfuric acid by mass.

Answers

Answer:

4.956 g/gallon * 0.387 = 1.91 g of sulfuric acid in 1 gallon of battery acid.

Explanation:

To calculate the number of grams of sulfuric acid in 1 gallon of battery acid, we can use the density of the solution and the percentage of sulfuric acid by mass.

First, we need to convert the density from g/ml to g/gallon. Since 1 gallon is equal to 3.785 L, we can multiply the density of 1.31 g/ml by 3.785 to get 4.956 g/gallon.

Next, we can use the percentage of sulfuric acid by mass to find the mass of sulfuric acid in the solution. To do this, we can multiply the mass of the solution by the percentage of sulfuric acid by mass, which is 0.387.

How many atoms are in 30.1 L of Water vapor at STP?

Answers

First ⬆️. Second ⬆️

I hope this helps ✌

which of the following has the correct curved arrows placement to show resonance for the given allylic carbocation>

Answers

An allylic lone pair is the appropriate positioning for the curved arrows to indicate resonance for the specified allylic carbocation.

What is a carbocation and how does one create one?

The carbocation is indeed an organic molecule that develops when two valence electrons, which are typically shared by two atoms of carbon, are lost from such a carbonyl group that already possesses four bonds. As a result, a carbon atom with three rather than four bonds and a positive charge is created.

What distinguishes a carbocation?

All carbon atoms in carbocations, also referred to as carbonium ions, are positively charged. A ion is indeed a positive charge, and the "carbo" part of the term refers to an atom of carbon.

To know more about carbocation visit:

https://brainly.com/question/19168427

#SPJ4

Given the following balanced equation, determine the rate of reaction with respect to [O2]: 2O3 (g).....yields.....3O2 (g)
a. Rate = -2deltaO2 over delta t
b. Rate = -2/3delta O2 over delta t
c. Rate = +1/3delta O2 over delta t
d. Rate = +3delta O2 over delta t
e. it is not possible to determine without more information

Answers

The balanced equation is :

2O₃(g)   ----->   3O₂(g)

The rate of the reaction with [O₂] :The correct option c) Rate = + (1/3) Δ[O₂] /Δt  

The balanced chemical equation is as follows :

2O₃(g)   ----->   3O₂(g)

The rate of the reaction is the speed of the reaction at which the product is formed from the reaction in the chemical reactions. The rate for the chemical reaction is expressed by the decrease in the concentration of the reactants or the increase in the concentration of the products:    

The rate of reaction with respect to the [O₂] is expressed as :

The rate =  + (1/3) Δ[O₂] /Δt  

To learn more about rate here

https://brainly.com/question/13898580

#SPJ4

which of the following would decrease the rate of a chemical reaction? adding more reactants stirring the reaction more vigorously squeezing the reactants into a smaller volume increasing the temperature raising the activation energy

Answers

Raising the activation energy would decrease the rate of a chemical reaction.

The rate of a chemical reaction refers to the speed at which the reactants are converted into products. There are several factors that can affect the rate of a chemical reaction, including the concentration of reactants, temperature, and the presence of catalysts or inhibitors.

Adding more reactants would generally increase the rate of a chemical reaction, as there would be more particles present to collide and react. Stirring the reaction more vigorously would also increase the rate of the reaction, as it would increase the chances of successful collisions between reactant particles. Squeezing the reactants into a smaller volume would also increase the rate of the reaction, as it would increase the concentration of reactants and the chances of successful collisions.

On the other hand, increasing the temperature would generally increase the rate of a chemical reaction, as it would increase the kinetic energy of the reactant particles and increase the chances of successful collisions.

However, raising the activation energy would decrease the rate of a chemical reaction, as it would require more energy for the reactant particles to overcome the activation energy barrier and undergo a successful reaction. Activation energy is the energy required to start a chemical reaction.

Learn more about activation energy here:

https://brainly.com/question/1380484

#SPJ4

in part 1, sort the orbitals in order of energy, with the lowest-energy orbital at the bottom. then in part 2, consider how many of these orbitals are filled with electrons.

Answers

The lowest energy orbital will be closest to the nucleus of an atom. Each and every orbital is filled with electrons in the order: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p, and so on.

The lowest energy sublevel always be the 1s sublevel, which consists of one orbital. The single electron of an hydrogen atom will be occupy the 1s orbital when the atoms are in its ground state. As we proceed with atoms with multiple electrons, those electrons are added to the next lowest sublevel: 2s, 2p, 3s, and so on. Orbitals will be ranked in the increasing order of orbital energy as follows: 1s < 2s = 2p < 3s = 3p = 3d <4s = 4p = 4d= 4f.

To now more about lowest energy here

https://brainly.com/question/28609057

#SPJ4

Other Questions
In how many ways can 3 novels, 2 mathematics books, and 1 chemistry book be arranged on a bookshelf if (a) the books can be arranged in any order? (b) the mathematics books must be together and the novels must be together? (c) the novels must be together, but the other books can be arranged in any order? One of the effects of gas prices rising from about $2 to about 4 per gallon was airlines ordering new, fuel-efficient aircraft. a. True b. False Suppose one-sixth of a certain company's sales are made in New England. If New England sales amount to $700,000, what are the total sales (in dollars) of the company? which of the following actions by an employer would likely foster an increased continuance commitment among its employees? Cylinders A and B are similar solids. The base of cylinder A has a circumference of 4 units. The base of cylinder B hasan area of 9 units.The dimensions of cylinder A are multiplied by what factor to produce the corresponding dimensions of cylinder B?4/92/33/29/4 Which type of cnidarian is the Portuguese man-of-war?Select one:A- JellyfishB- hydroidC- coralD- nemone The acceleration function (in m/s2) and the initial velocity v(0) are given for a particle moving along a line.The acceleration function (in m/s2) and the initial velocity v(0) are given for a particle moving along a line.a(t) = 2t + 6, v(0) = 16, 0 t 5(a) Find the velocity at time t.v(t)=______ m/s(b) Find the distance traveled during the given time interval. accrued liabilities are: multiple choice questioA. expensed in a later period than the cash was paid B. expenses incurred before cash was paid C. expenses paid at the time incurred A condition associated with crossing multiple time zones is experienced by sports tourists from Argentina travelling to Japan list two ways for this condition before the flight How do I fix my computer restarted unexpectedly or encountered? identify tools that are ideal for cleaning glassware. What role does the Electoral College play in electing the US president nerve cells, receive stimuli and transmit action potentials to other neurons or to effector organs. They are organized to form complex networks that perform the functions of the nervous system. Select the correct answer.A student is writing a personal narrative about his first trip to the ocean.Read this sentence from his narrative.The rough sea was kind of greenish blue by the shore but then it changed to a dark blue in the deeper parts where it looked lke it might rain.How could the sentence best be rewritten using sensory language?O A.The turbulent sea, turquoise where the waves broke along the shore, transformed into a cerulean blue where rain clouds hoveredthe deep.O B. The sea was violent and turquoise along the shoreline, but it was darker blue and storm clouds were looming on the horizon.O c. The sea was turbulent and turquoise in color, contrasting with dark rain clouds that hung over the deep cerulean blue sea.O D. Rain clouds formed over the deep blue part of the ocean, as compared to the rough sea that was a turquoise color by the shore. (50 POINTS AND BRAINLYEST)The side length of the square is 14 units long, what is the diameter of the circular base of the cylinder from the picture in number 1? the rosebud flower shop has a basic delivery charge of 5$ plus a rate of 25 cents per mile. The beautiful bouquets shop has a delivery charge of $7 plus a rate of 20 cents per mile. a special evaluation for an e-5 should be submitted to document which of the following circumstances How will the decisions about Germanys lands create problems in the future? What is the height of the brick? threat assessment refers to a____multidisciplinary approach designed to identify and intervene with individuals who pose a risk of engaging in targeted violence, regardless of motive, target or weapon used.