mine C contient 1000 mg
d'acide ascorbique. Il
se prend dans un verre
d'eau de 20 CL.
1. Une orange contient
115 mg d'acide ascorbique. Combien faut-il d'oranges
pour obtenir la même masse d'acide ascorbique que
le comprimé ?
2. Il faut environ trois oranges pour obtenir 200 mL de
jus. Quelle est la concentration en acide ascorbique
du jus d'orange ?
3. Quel volume de la solution obtenue avec le comprimé
dans le verre contient la même masse d'acide ascor-
bique que ces trois oranges ?
4. Quel volume d'eau faut-il ajouter au verre contenant
le comprimé pour obtenir la même concentration en
acide ascorbique que le jus d'orange ?

Answers

Answer 1

Answer:

Explanation: honestly i don’t speak spanish so please explain with english


Related Questions

at what velocity (in revolutions per minute) will the peak voltage of a generator be 475 v, if its 475 turn, 8.00 cm diameter coil rotates in a 0.250 t field?

Answers

The velocity at which the peak voltage of the generator is 475 V is 95.0 revolutions per minute.

The peak voltage (V) of a generator is given by the equation V = NBAω, where N is the number of turns in the coil, B is the magnetic field strength, A is the area of the coil, and ω is the angular velocity of the coil.

We are given that the coil has 475 turns, a diameter of 8.00 cm, and rotates in a 0.250 T field. We can use these values to find the area of the coil:

radius = diameter/2 = 4.00 cm

[tex]area = π(radius)^2 = 50.27 cm^2[/tex]

Now we can solve for ω:

V = NBAω

[tex]ω = V/(NBA) = (475 V)/(475 turns)(0.250 T)(50.27 cm^2)(1 m^2/10,000 cm^2)(1 rev/2π radians)[/tex]

ω = 95.0 rev/min

Therefore, the velocity at which the peak voltage of the generator is 475 V is 95.0 revolutions per minute.

Learn more about The velocity

https://brainly.com/question/17127206

#SPJ4

1260 RPM. RPM = (Peak Voltage / (2 * pi * coil diameter * magnetic field strength)) * 60 can be used to compute this.

The formula Vp = NABw/2, where N is the number of turns in the coil, A is the coil's area, B is the strength of the magnetic field, and w is the coil's angular velocity, determines the peak voltage produced by a revolving coil. We arrive at w = 2Vp/(NAB) after solving for w. Since the coil diameter rather than the area is provided, we can apply the calculation A = pi*d2/4 to determine the area. After simplifying and substituting the given variables, we get at w = 2 * 475 / (475 * pi * 0.082 * 0.25) = 420 rad/s. Finally, we increase this by 60 / (2 * pi), which gives us 1260 RPM.

learn more about coil here:

https://brainly.com/question/27961451

#SPJ11

ten 7.0-w christmas tree lights are connected in series to each other and to a 120-v source. what is the resistance of each bulb?

Answers

The resistance of each bulb which are connected in series is 20.571 Ω.

Let's find the resistance of each bulb using the given terms:

1. Voltage of source (V_source) = 120 V
2. Number of bulbs (n) = 10
3. Power of each bulb (P) = 7.0 W

We'll use the formula P = V²/R to find the resistance of each bulb.

1: Find the total power of the series.
Total power (P_total) = n * P = 10 * 7.0 W = 70 W

2: Find the total resistance of the series.
Using the formula P_total = V_source^2 / R_total, we can find R_total:
R_total = V_source² / P_total = (120 V)² / 70 W = 14400 / 70 = 205.71 Ω

3: Find the resistance of each bulb.

Since the bulbs are connected in series, the total resistance is the sum of the individual resistances. Therefore, we can find the resistance of each bulb (R_bulb) as follows:

R_bulb = R_total / n = 205.71 Ω / 10 = 20.571 Ω

So, the resistance of each bulb is approximately 20.571 Ω.

Learn more about resistance:

https://brainly.com/question/24858512

#SPJ11

Most battery-powered devices won?t work if you put the battery in backward. But for a device that you plug in, you can often reverse the orientation of the plug with no problem. Part A Explain the difference. a. You can often reverse the plug in the wall because it is an AC. However, a battery is a DC. b. Battery-powered devices are low-powered. c. Battery-powered devices have many defects in their construction d. You can often reverse the plug in the wall because it is a DC. However, a battery is an AC.

Answers

Battery-powered devices require the correct orientation of the battery to function properly.

The difference between being able to reverse the orientation of a plug in a wall outlet versus a battery has to do with the type of electrical current being used.

Wall outlets provide AC (alternating current) power, which means that the direction of the electrical flow switches back and forth rapidly. This means that the orientation of the plug doesn't matter, since the current will flow in either direction.

In contrast, batteries provide DC (direct current) power, which means that the electrical flow only goes in one direction. If a battery is inserted backwards, the current will flow in the wrong direction and the device won't work properly or may even be damaged. Therefore, battery-powered devices require the correct orientation of the battery to function properly.

Learn more about Battery-powered devices

https://brainly.com/question/13530533

#SPJ4

For battery-powered gadgets to operate properly, the battery must be positioned correctly.

The type of electrical current being utilised determines whether a plug in a wall outlet can be turned around vs whether a battery can.

The electricity that comes out of wall plugs is AC (alternating current), which means that the flow of electricity rapidly changes direction. Because the current can flow in either direction, the plug's orientation is irrelevant.

Batteries, on the other hand, deliver DC (direct current) power, which refers to electrical flow that only occurs in one direction. The device won't function properly or might even be harmed if a battery is inserted backwards since the current will flow in the wrong direction. As a result, batteries must be oriented appropriately for battery-powered gadgets to work properly.

Learn more about Battery-powered devices here:

https://brainly.com/question/13530533

#SPJ11

why should ay be close to 9.8 m/s2, with the other two being close to 0? why should all three gyroscope values be essentially 0?

Answers

The values you mentioned are related to the motion of a typical object near the surface of the Earth.

The acceleration due to gravity, represented by "g", is approximately 9.8 [tex]m/s^2[/tex] at sea level. This value is constant and acts vertically downward, so it's common to see it represented as a negative value in equations. If an object is at rest on a level surface, then its acceleration in the x and y directions should be close to zero. This is because the object is not moving in those directions, so it's not accelerating.

Regarding the gyroscope values, a gyroscope is a device that measures angular velocity or rotation rate. If a gyroscope is at rest or is not undergoing any rotation, its output should be zero. This is because there is no change in angular velocity to measure. So, if all three gyroscope values are essentially zero, it suggests that the device is not rotating or undergoing any significant angular velocity changes.

In summary, the values you mentioned are related to the motion of objects on or near the Earth's surface, and their values reflect the physical laws that govern that motion.

Learn more about gyroscope

https://brainly.com/question/30214363

#SPJ4

a student is 2.50m away from a convex lens while her image is 1.80m from the lens, what is the focal length?

Answers

To find the focal length of a convex lens, we can use the formula:
1/f = 1/di + 1/do

Where f is the focal length, di is the distance of the image from the lens, and do is the distance of the object from the lens.

We are given that the student is 2.50m away from the lens, so do = 2.50m. We are also given that the image is 1.80m from the lens, so di = 1.80m.

Plugging these values into the formula, we get:
1/f = 1/1.80 + 1/2.50

Simplifying this equation, we get:
1/f = 0.5556

Multiplying both sides by f, we get:
f = 1.80 / 0.5556

Solving for f, we get:
f ≈ 3.24 meters

Therefore, the focal length of the convex lens is approximately 3.24 meters.

To know more about focal length of a convex lens:

https://brainly.com/question/1031772

#SPJ11

A convex lens is 1.80 meters from a student who is 2.50 meters distant, and its focal length is 1.04 meters.

To solve this problem, we can use the lens equation:

1/f = 1/do + 1/di

where f is the focal length of the lens, do is the object distance (distance of the object from the lens), and di is the image distance (distance of the image from the lens).

In this problem, the object distance is do = 2.50 m and the image distance is di = 1.80 m. We can plug these values into the lens equation and solve for the focal length:

1/f = 1/do + 1/di

1/f = 1/2.50 + 1/1.80

1/f = 0.4 + 0.56

1/f = 0.96

f = 1/0.96

f ≈ 1.04 meters

Therefore, the focal length of the convex lens is approximately 1.04 meters.

To learn more about focal length, refer:-

https://brainly.com/question/29870264

#SPJ11

a loop of area 0.08 m2 is rotating at constant angular speed. it rotates at 87 rev/s with the axis of rotation perpendicular to a 0.08 t magnetic field. if there are 1017 turns on the loop, what is the maximum voltage induced in it? answer in units of v.

Answers

The maximum voltage induced in the loop is 82.05 volts. The EMF is negative.

The maximum voltage induced in the loop can be calculated using the formula:

EMF = -NΔΦ/Δt

Where EMF is the induced electromotive force, N is the number of turns in the loop, ΔΦ is the change in magnetic flux, and Δt is the time interval over which the change occurs.

In this case, the loop has an area of 0.08 m2 and is rotating at a constant angular speed of 87 rev/s, which corresponds to an angular velocity of 544.89 rad/s. The magnetic field is perpendicular to the axis of rotation, so the change in magnetic flux is given by:

ΔΦ = B*A*cos(θ)*Δt

Where B is the magnetic field strength, A is the area of the loop, θ is the angle between the magnetic field and the normal to the loop (which is 90 degrees in this case), and Δt is the time interval over which the change occurs.

Since the loop is rotating at a constant speed, the time interval over which the change occurs is equal to the time it takes for the loop to complete one revolution, which is:

Δt = 1/87 s

Plugging in the given values, we get:

ΔΦ = (0.08 T)*(0.08 m2)*(1)*(1/87 s) = 0.000921 Tm2/s

Next, we can calculate the induced EMF using the formula:

EMF = -NΔΦ/Δt

Plugging in the given values, we get:

EMF = -(1017)*(0.000921 Tm2/s)/(1/87 s) = -82.05 V

Since the EMF is negative, this means that the induced voltage is in the opposite direction to the direction of the current flow in the loop.

For more such questions on EMF.

https://brainly.com/question/14300059#

#SPJ11

the amplitude of the electric field of an electromagnetic wave is 196. v/m. what is the amplitude of the magnetic field of the electromagnetic wave?

Answers

The amplitude of the magnetic field of the electromagnetic wave is 6.53 x 10^-7 T.

To find the amplitude of the magnetic field of an electromagnetic wave, we need to use the relationship between the electric and magnetic fields in an electromagnetic wave.

According to this relationship, the amplitude of the magnetic field is equal to the amplitude of the electric field divided by the speed of light (c). Therefore, if the amplitude of the electric field of an electromagnetic wave is 196 V/m, the amplitude of the magnetic field can be calculated as follows:

Amplitude of magnetic field = Amplitude of electric field / Speed of light
Amplitude of magnetic field = 196 V/m / 3 x 10^8 m/s
Amplitude of magnetic field = 6.53 x 10^-7 T

It is important to note that the amplitude of the magnetic field and the electric field of an electromagnetic wave are perpendicular to each other and are responsible for the wave's propagation through space.

To learn more about : electromagnetic

https://brainly.com/question/13874687

#SPJ11

A train car with a mass of 2000 kg is traveling east at 10 m/s. It is approaching another train car with a mass of 1000 kg also traveling east at 3 m/s. After the trains collide, the more massive train car continues east at 6 m/s. What is the new velocity of the less massive train car?

Answers

The new velocity of the less massive train car has a velocity of 10 m/s after the collision.

What is velocity?

Velocity is a measure of the rate and direction of an object's motion. It is a vector quantity, meaning it has both magnitude and direction. Velocity is typically represented by the equation v = s/t, where v is the velocity, s is the displacement (or distance travelled), and t is the time taken. Velocity is often confused with speed, which is the measure of the magnitude of an object's motion. Speed is a scalar quantity and is represented by the equation s = t/v.

The total momentum of the two train cars before the collision is calculated by multiplying the mass of each car by its velocity.

The total momentum of the system before the collision is 2000 kg x 10 m/s + 1000 kg x 3 m/s = 23000 kg m/s.

The total momentum of the system after the collision is 2000 kg x 6 m/s + 1000 kg x v, where v is the velocity of the less massive train car after the collision.

Therefore, we can set up the equation 23000 = 12000 + 1000v and solve for v.

v = 10 m/s.

To learn more about velocity

https://brainly.com/question/24445340

#SPJ1

as per subpart b, a physician who is a member of the research team on a study involving nonviable neonates may assist the treating physicians in determining whether neonates are nonviable. True or false?

Answers

True a significant factor in algal blooms and the excessive growth of aquatic vegetation that results in competition for sunlight and congestion.

What exactly is a contest?

Job competition is fierce. Computer firms compete fiercely with one another. The two businesses are in opposition to one another.It can also be described more broadly as the either direct or indirect relationship between species that affects fitness when they share a resource.When there is monopolistic competition, several vendors offer differentiated goods—goods with minor differences but similar functions.

An organism is what?

Therefore, every animal, plant, mould, protist, organism, or archaeon found on Earth would be considered an organism. There are numerous methods to categorise these species.a single organism that uses its organs to carry out its life's functions

To know more about organism visit:

https://brainly.com/question/13278945

#SPJ1

Leonardo and his friends have gotten into aggressive music that celebrates owning and flaunting expensive things and other signs of success. The
music's lyrics often boast about criminal behavior being the road to luxury and fame. Leonardo's sister Francesca listens to some of the same music,
but she thinks it's important for her brother and his friends to recognize the songs aren't a good influence. What is the BEST comment Francesca
could make to Leonardo about his music?
OA.
OB.
O C.
"I get why you like it, but you know it's not real life, right?"
"You and your friends look like fools trying to be the people in those songs."
"If you want to live that kind of life, you'd better start acting like it."
OD. "None of the guys you listen to are really that rich."

Answers

The best comment Francesca could make to Leonardo about his music is A. "I get why you like it, but you know it's not real life, right?"

What is the BEST comment Francesca could make to Leonardo about his music?

This comment acknowledges Leonardo's interest in the music and doesn't come across as an attack on his taste or his friends. At the same time, it gently challenges the idea that the lyrics represent a desirable or realistic lifestyle.

It's important for Leonardo and his friends to understand that the behavior celebrated in the songs is often illegal or harmful and doesn't lead to long-term success or happiness.

Option B comes across as insulting and judgmental, which may cause Leonardo to become defensive or dismiss Francesca's concerns. Option C is not a helpful comment because it reinforces the idea that criminal behavior is a viable path to success. Option D is not necessarily true, and even if it were, it doesn't address the larger issue of the negative influence the music may have on Leonardo and his friends.

Learn more about music here:https://brainly.com/question/26138624

#SPJ1

in this simplified version of the sgd update there is a clear relationship between momentum and the batch size . what is that relation? specifically, let's assume we train a model with momentum and a batch size . how should we change the momentum if we now have a gpu with more memory and can use a batch size of ? specify the momentum that would lead to equivalent gradient updated in the simplified sgd update equation above. round to two decimal digits (e.g. 0.12).

Answers

The equivalent gradient updates as momentum 0.9 with batch size B = 32 in the simplified SGD update equation.

What is the relation?

The relationship between momentum and batch size in the simplified version of SGD update is that increasing the batch size leads to a decrease in the effective learning rate, which in turn requires an increase in momentum to maintain the same level of stability.

If we train a model with momentum and a batch size of B, and now have a GPU with more memory and can use a batch size of B', we should increase the momentum by a factor of sqrt(B/B') to maintain the same level of stability.

To find the equivalent momentum for the simplified SGD update equation, we can use the formula:

momentum' = momentum * sqrt(B/B')

For example, if we initially trained with momentum = 0.9 and batch size B = 32, and now have a GPU with enough memory to use batch size B' = 64, we would calculate:

momentum' = 0.9 * sqrt(32/64) = 0.9 * 0.7071 = 0.64 (rounded to two decimal digits)

Therefore, using a momentum of 0.64 with batch size B' = 64 would lead to equivalent gradient updates as momentum 0.9 with batch size B = 32 in the simplified SGD update equation.

Learn more about SGD

brainly.com/question/30244812

#SPJ11

A loose spiral spring carrying no current is hung from a ceiling. When a switch is thrown so that a current exists in the spring, do the coils move closer together move farther apart not move at all

Answers

The coils in the spring will move farther apart when a current is passed through it because of the solenoid effect.

The solenoid effect describes the way a loose spiral spring expands when a current is fed through it. An electric current flows through a coil of wire to create a solenoid, a type of electromagnet. A magnetic field is produced when current passes through the coil, and the magnetic field lines are parallel to the axis of the coil. The amount of current flowing through the coil and the number of wire turns within the coil determines how strong the magnetic field is.

Because a loose spiral spring behaves like a coil of wire, the solenoid effect is seen in this situation. The magnetic field that is created around a spring when a current is sent through it has lines that are parallel to the spring's axis. The interaction between the magnetic field and the spring's current produces a force that pushes the coils apart.

To learn more about solenoids, refer to:

https://brainly.com/question/4340558

#SPJ4

what magnitude force is required to give a helicopter of mass m an acceleration of 0.10g upward?what work is done by this force as the helicopter moves a distance h upward?

Answers

A) The magnitude force required to give a helicopter of mass M an acceleration of 0.10 g upward is F = 0.981 M N.

B) The work done by the force as the helicopter moves a distance h upward is W = 0.981 Mh N.

A) The force required to give a helicopter of mass M an acceleration of 0.10 g upward can be calculated using Newton's Second Law of Motion, which states that the force applied to an object is equal to the object's mass multiplied by its acceleration. The acceleration given is 0.10g, which can be converted to meters per second squared (m/s²) as follows:

0.10 g = 0.10 × 9.81 m/s² = 0.981 m/s²

Thus, the force required can be calculated as:

F = M × a

F = M × 0.981 N

B) To calculate the work done by the force as the helicopter moves a distance h upward, we can use the formula for work done by a constant force, which is:

W = F × d × cos(θ)

where W is the work done, F is the force applied, d is the displacement, and θ is the angle between the force and the displacement vectors. In this case, the displacement is upward and the force is also upward, so θ = 0 and cos(θ) = 1.

The work done by the force as the helicopter moves a distance h upward is:

W = F × h × cos(θ)

W = F × h

Substituting the value of F from Part A, we get:

W = 0.981 M N × h

To learn more about force the link:

https://brainly.com/question/26115859

#SPJ4

The complete question is:

A) What magnitude force is required to give a helicopter of mass M an acceleration of 0.10 g upward? Express your answer in terms of the variable M and appropriate constants.

B) What work is done by this force as the helicopter moves a distance h upward? Express your answer in terms of the variables M,h, and appropriate constants.

10. A roller coaster accelerates at 8.75 m/s² from rest to a final velocity of 70 m/s. How long does it
take to speed up?

Answers

A roller coaster accelerates at 8.75 m/s² from rest to a final velocity of 70 m/s it takes 8 sec to speed up.

How to calculate time?Using the equation v = u + at, we can find:70 m/s for final velocityThe roller coaster starts at rest, therefore u = starting velocity = 0 m/s.8.75 m/s2 for acceleration and time, respectivelyWhen we solve for t, we obtain:t = (v - u) / at = (70 m/s - 0 m/s) / 8.75 m/s2 t = 8 sec.In light of this, the roller coaster's acceleration takes 8 seconds.The rate of change in an object's velocity with respect to time is known as acceleration in mechanics. The vector quantity of accelerations. The direction of the net force that is acting on an object determines its acceleration.

For more information on time of roller coaster kindly visit to

https://brainly.com/question/18002471

#SPJ1

if hydrogen is the most common element in the universe, why do we not see the lines of hydrogen in the spectra of the hottest stars?

Answers

The reason we do not see the lines of hydrogen in the spectra of the hottest stars is due to the ionization of hydrogen atoms at high temperatures.

In these stars, the temperatures are so high that the electrons in the hydrogen atoms are stripped away, leaving behind only the protons. This ionized hydrogen does not produce the same spectral lines as neutral hydrogen, which is what we typically observe in cooler stars. Instead, the spectra of hot stars are dominated by lines from ionized metals, such as helium, carbon, and oxygen. So while hydrogen is indeed the most common element in the universe, its presence in the spectra of hot stars is not as prominent due to ionization.

More on hydrogen: https://brainly.com/question/30077093

#SPJ11

which type of spectrum contains dark bands that represent wavelengths intercepted by a material between a radiation source and the earth?

Answers

The type of spectrum being referred to is an absorption spectrum. Here are the steps involved in creating an absorption spectrum:

1) A radiation source emits a continuous spectrum of light, which contains all wavelengths of visible light.

2) The light from the radiation source passes through a material, such as a gas, liquid, or solid.

3) The material absorbs certain wavelengths of light that are specific to its chemical composition.

These absorbed wavelengths correspond to the energy levels of the electrons in the material's atoms or molecules.

4) The remaining light that passes through the material is a spectrum that has dark bands or lines where the absorbed wavelengths should be. These dark bands represent the wavelengths that were absorbed by the material.

5) The resulting spectrum is an absorption spectrum that can be used to identify the elements or compounds present in the material.

To summarize, an absorption spectrum contains dark bands that correspond to the specific wavelengths of light that are absorbed by a material between a radiation source and the earth. By analyzing the absorption spectrum, scientists can identify the composition of the material.

To know more about absorption spectrum :

https://brainly.com/question/14282264

#SPJ11

A mechanic exerts a force of 55 N on a 0.015 m2 hydraulic piston to lift a small automobile. The piston the automobile sits on has an area of 2.4 m2. What is the weight of the automobile?

Answers

The force needed to lift the car is 8800 N, which is its weight.

What kind of forces do hydraulic systems produce?

In hydraulic systems, forces are transferred from one area to another inside an incompressible fluid, such as water or oil. Most aircraft's landing gear and braking systems are hydraulic. In order to function, pneumatic systems need a compressible fluid like air.

The smaller piston received a 55 N force from the mechanic, and its surface area was 0.015 m². We may determine the pressure used by the mechanic using the pressure formula P = F/A:

P = F/A = 55 N / 0.015 m² = 3666.67 Pa

This pressure is transmitted to the larger piston with an area of 2.4 m². The force on the larger piston can be calculated using the formula F = PA:

F = PA = 3666.67 Pa x 2.4 m² = 8800 N

To know more about force visit:-

https://brainly.com/question/13191643

#SPJ1

A client reports general malaise and has a temperature is 103.8°F (39.9°C). What is the rationale for administering a prescribed aspirin, an antipyretic, to this client?
Antipyretics protect vulnerable organs, such as the brain, from extreme temperature elevation.
Temperatures in excess of 99.5°F (37.5°C) can result in seizure activity.
Lower temperatures inhibit the protein synthesis of bacteria.
Most antipyretics have been shown to have little effect on core temperature but alleviate discomforts.

Answers

A client reports general malaise and has a temperature is 103.8°F (39.9°C). What is the rationale for administering a prescribed aspirin, an antipyretic, to this client

step-by-step explanation:

Step 1: A client reports general malaise and has a temperature of 103.8°F (39.9°C).

Step 2: The high temperature is an indication that the body is fighting an infection or inflammation.

Step 3: Antipyretics, such as aspirin, work by blocking the production of certain chemicals in the body that cause fever.

Step 4: Lowering the body temperature can help alleviate the discomfort associated with fever and reduce the risk of complications, such as seizures or dehydration.

Step 5: Aspirin is a commonly prescribed antipyretic that can be effective in reducing fever.

Step 6: The rationale for administering a prescribed aspirin, an antipyretic, to this client is to lower the body temperature and alleviate the discomfort associated with fever.

Step 7: It is important to follow the prescribed dosage and instructions for aspirin to avoid potential side effects or interactions with other medications.

                 

Step 8: If the fever persists or worsens, it is important to seek medical attention to determine the underlying cause and ensure appropriate treatment.

To know more about Antipyretics :

https://brainly.com/question/30758739

#SPJ11

at what speed do a bicycle and its rider, with a combined mass of 90 kg , have the same momentum as a 1600 kg car traveling at 4.8 m/s ? express your answer to two significant figures and include the appropriate units.

Answers

The momentum of an object is defined as the product of its mass and velocity. Therefore, we can set up an equation where the momentum of the bicycle and rider is equal to the momentum of the car:

(m_bicycle + m_rider)v_bicycle = m_carv_car

where m_bicycle and m_rider are the masses of the bicycle and rider (assumed to be combined), v_bicycle is the velocity of the bicycle and rider, m_car is the mass of the car, and v_car is the velocity of the car.

Substituting the given values, we get:

(90 kg)v_bicycle = (1600 kg)(4.8 m/s)

Solving for v_bicycle, we get:

v_bicycle = (1600 kg)(4.8 m/s)/(90 kg) = 85.3 m/s

Therefore, the bicycle and rider would have to travel at a speed of 85.3 m/s to have the same momentum as the car traveling at 4.8 m/s.

which particles have positive charges, and which have negative charges? sort the particles into positive and negative charged.

Answers

Protons have a positive charge, neutrons have no charge, and electrons have a negative charge.

The three fundamental particles in an atom are protons, neutrons, and electrons. Protons have a positive charge and are located in the nucleus of the atom, along with neutrons, which have no charge. Electrons have a negative charge and orbit the nucleus. The number of protons in an atom determines its atomic number, which in turn determines the element to which it belongs.

The number of electrons in an atom determines its chemical properties, as they are involved in chemical bonding with other atoms. The charges of the particles are important in determining the behavior of atoms in chemical reactions and in the formation of molecules and compounds.

To know more about charge, here

brainly.com/question/3412043

#SPJ4

--The complete question is, Which fundamental particles have positive charges, and which have negative charges?--

at the sea level the airplane can takeoff at the speed of 150mi/hr. what is the required takeoff speed at albuquerque

Answers

To determine the required takeoff speed at Albuquerque, we need to consider the difference in air density between sea level and the altitude of Albuquerque.

As altitude increases, air density decreases, which can have a significant effect on aircraft performance.

In particular, the reduced air density means that the airplane needs to achieve a higher ground speed in order to generate enough lift to take off.

To calculate the required takeoff speed at Albuquerque, we can use the following equation:

V2 = V1 x √(rho2/rho1)

where:

V1 = takeoff speed at sea level (given as 150 mph)

rho1 = air density at sea level (standard value of 1.225 kg/m^3)

rho2 = air density at Albuquerque (can be looked up or calculated using atmospheric models)

V2 = required takeoff speed at Albuquerque (what we want to find)

Let's assume that Albuquerque is at an altitude of 5,312 feet (the airport elevation).

Using atmospheric models or tables, we can find that the air density at this altitude is approximately 0.860 kg/m^3.

Now we can substitute the values into the equation:

V2 = 150 mph x √(0.860 kg/m^3 / 1.225 kg/m^3)

V2 = 150 mph x 0.806

V2 = 121 mph (rounded to the nearest whole number)

Therefore, the required takeoff speed at Albuquerque is approximately 121 mph. This is lower than the takeoff speed at sea level due to the reduced air density at higher altitudes.

To know more about speed visit link :

https://brainly.com/question/13780167

#SPJ11

A ball of mass M swings in a horizontal circle at the end of a string of radius R at an initial tangential speed v0 as it undergoes uniform centripetal motion. A student gradually pulls the string inward such that the radius of the circle decreases, as shown in the figure. Which of the following predictions is correct regarding the angular momentum and rotational inertia of the ball about the axis of revolution as the ball is pulled inward? The angular momentum of the ball increases. The rotational inertia of the ball about the axis of revolution decreases. A The angular momentum of the ball increases. The rotational inertia of the ball about the axis of revolution stays the same. B The angular momentum of the ball remains constant. The rotational inertia of the ball about the axis of revolution decreases. C The angular momentum of the ball remains constant. The rotational inertia of the ball about the axis of revolution stays the same. D

Answers

As the ball is pulled inward, the radius of the circle decreases, which means that the tangential speed of the ball must increase in order to maintain uniform centripetal motion. Option (A)

This increase in tangential speed means that the angular velocity of the ball also increases, as angular velocity is directly proportional to tangential speed divided by the radius of the circle.

Since angular momentum is given by the product of rotational inertia and angular velocity, any change in angular velocity will result in a change in angular momentum.

As a result, the proper prediction for the angular momentum and rotational inertia of the ball about the axis of revolution as the ball is drawn inward is: A) The angular momentum of the ball rises. The rotational inertia of the ball about the axis of revolution remains constant.

Learn more about tangential speed

https://brainly.com/question/29860420

#SPJ4

13. what type of lens is used to make a magnifying glass? a) converging b) diverging c) either type would work equally well.

Answers

Option (a).

A converging lens is used to make a magnifying glass, which works by bending light to create a magnified image.

The curved surface of the lens helps to focus and magnify the object being viewed.

Learn more about lens https://brainly.com/question/15123066

#SPJ11

newton's second law: a box of mass 50 kg is at rest on a horizontal frictionless surface. a constant horizontal force f then acts on the box and accelerates it to the right. it is observed that it takes the box 8.0 seconds to travel 32 meters. what is the magnitude of the force?

Answers

The magnitude of the force is 25 Newtons.

We can use Newton's second law, which states that the net force (F_net) acting on an object is equal to its mass (m) times its acceleration (a):

[tex]fnet = m*a[/tex]

The final velocity can be calculated using the formula:

[tex]v = d/t[/tex]

where d is the distance travelled and t is the time taken. Plugging in the values, we get:

v = 32 m / 8.0 s

v = 4.0 m/s

Therefore, the acceleration is:

a = Δv / Δt

a = 4.0 m/s / 8.0 s

a = 0.5 m/s^2

Now we can use Newton's second law to find the magnitude of the force:

F_net = 50 kg * 0.5 m/s^2

F_net = 25 N

To know more about newton's second law:

https://brainly.com/question/13447525

#SPJ4

4. in the heat transfer relation for a heat exchanger, what is the quantity f called? what does it represent? can f be greater than 1?

Answers

In the heat transfer relation for a heat exchanger, the quantity f is called the "effectiveness." It represents the ratio of the actual heat transfer rate in the heat exchanger to the maximum possible heat transfer rate under the given conditions.

The quantity f in the heat transfer relation for a heat exchanger is called the heat transfer coefficient correction factor. It represents the ratio of the actual heat transfer coefficient to the theoretical heat transfer coefficient. It takes into account the effects of fluid properties, flow conditions, and heat exchanger geometry on the heat transfer process.

Yes, f can be greater than 1. This occurs when the actual heat transfer coefficient is higher than the theoretical heat transfer coefficient, which can happen when there are enhancements to the heat transfer surface or when the fluid flow is optimized.

To know more about heat transfer coefficient correction factor:
https://brainly.com/question/30981087

#SPJ11

A mass of 25. 0 kg is acted upon by two forces: is 15. 0 n due east and is 10. 0 n and due north. The acceleration of the mass is

Answers

the acceleration of the mass is 0.7212 m/s^2.

To find the acceleration of the mass, we need to first determine the net force acting on it. We can do this by using vector addition to add the two forces together.

Using the Pythagorean theorem, we can find the magnitude of the diagonal force:

sqrt[[tex](15N)^{2}[/tex] + [tex](10N)^{2}[/tex]] = sqrt[225 + 100] = sqrt(325) = 18.03 N

The direction of this force can be found using the inverse tangent function:

theta =[tex]tan^{-1}(10.0N/15.0N)[/tex] = 33.69 degrees north of east

We can now use vector addition to find the net force on the mass:

F_net = sqrt[[tex](15N)^{2}[/tex] + [tex](10N)^{2}[/tex]] = 18.03 N, at an angle of 33.69 degrees north of east

To find the acceleration of the mass, we can use Newton's second law, which states that the net force acting on an object is equal to its mass times its acceleration:

F_net = ma

Solving for the acceleration, we get:

a = F_net / m = 18.03 N / 25.0 kg = 0.7212 m/s^2

Therefore, the acceleration of the mass is 0.7212 m/s^2.

Learn more about Vector Addition:

https://brainly.com/question/19420810

a ? is a wheel with a concave edge for supporting a moving rope that is changing direction.

Answers

is a wheel with a concave edge for supporting a moving rope that is changing direction.

A sheave is a wheel with a concave edge for supporting a moving rope that is changing direction. A sheave helps to reduce friction and increase efficiency when managing ropes in various applications.

The term you are looking for is "pulley". A pulley is a simple machine that consists of a wheel with a grooved rim or concave edge, which is designed to support a moving rope or cable and change its direction of motion. Pulleys are commonly used in various applications, such as lifting heavy objects, moving loads, and transmitting power between machines.

They can also be combined with other pulleys and mechanical systems to create complex machines that perform a wide range of tasks.

To know more about  direction of motion:

https://brainly.com/question/3421105

#SPJ11

a bridge of length 50.0 m and mass 8.20 104 kg is supported on a smooth pier at each end as shown in the figure below. a truck of mass 2.50 104 kg is located 15.0 m from one end. what are the forces on the bridge at the points of support?

Answers

The forces at the left support are 1.61 x 105 N upward and the forces at the right support are 8.88 × 105 N downward by taking into account the forces acting on the bridge and the vehicle.

Finding the forces on a bridge with a truck positioned 15.0 metres from one end and piers supporting it at each end is the task at hand in this challenge. The truck weighs 2.50 x 104 kg, whereas the bridge is 50.0 metres long and 8.20 x 104 kg in weight.

The forces acting on the bridge at its places of support must be determined using Newton's laws of motion. We may determine that the forces at the left support are 1.61 x 105 N upward and the forces at the right support are 8.88 × 105 N downward by taking into account the forces acting on the bridge and the vehicle.

Learn more about forces:

https://brainly.com/question/30526425

#SPJ4

The complete question:

A bridge of length 50.0 m and mass 8.20×10^4 kg is supported on a smooth pillar at each end as shown. A truck of mass 2.50×10^4 kg is located 15.0 m from one end. What are the forces of the bridge at the points of support?

a father with twice the mass of his daughter is watching her skate as he is standing still on ice with his skates on. she approaches him with speed v and then grabs him so that it is a perfectly inelastic collision. at what speed do the two of them move, i.e. what is their center of mass velocity? assume the ice is frictionless and there is no wind resistance.

Answers

The center of mass velocity after the perfectly inelastic collision is Vf = v/3.

To determine the center of mass velocity after the perfectly inelastic collision between the father and daughter on frictionless ice with no wind resistance.

Step 1: Assign variables to the given information.
Let the mass of the father be 2m and the mass of the daughter be m. The daughter approaches the father with a speed of v, and the father is initially at rest.

Step 2: Apply the conservation of momentum principle.
In a collision, the total momentum before the collision equals the total momentum after the collision. Let Vf represent the final velocity of both the father and daughter after the collision. The initial momentum is given by:

p_initial = (mass_daughter × v_daughter) + (mass_father × v_father)

Since the father is initially at rest, his initial velocity is 0:

p_initial = (m × v) + (2m × 0) = m × v

Step 3: Calculate the total momentum after the collision.
After the collision, the combined mass of the father and daughter is 2m + m = 3m. The final momentum is:

p_final = (mass_combined) × Vf = (3m) × Vf

Step 4: Set the initial momentum equal to the final momentum and solve for the final velocity, Vf.
m × v = (3m) × Vf

Divide both sides by 3m:

Vf = (m × v) / (3m)

The mass m cancels out:

Vf = v / 3

You can learn more about the center of mass at: brainly.com/question/29576405

#SPJ11

when a charged particle moves perpendicularly to a uniform magnetic field, what best describes its trajectory? when a charged particle moves perpendicularly to a uniform magnetic field, what best describes its trajectory? a sinusoidal curve a circle a straight line a parabola

Answers

When a charged particle moves perpendicularly to a uniform magnetic field, its trajectory is a circle. Here option B is the correct answer.

When a charged particle moves perpendicularly to a uniform magnetic field, its trajectory follows a circular path. This phenomenon is known as the Lorentz force, named after the Dutch physicist Hendrik Lorentz who discovered it in the late 19th century.

The Lorentz force arises due to the interaction between the magnetic field and the charged particle's electric field. When a charged particle moves through a magnetic field, it experiences a force perpendicular to both the direction of its motion and the direction of the magnetic field. This force causes the charged particle to move in a circular path with a constant radius and a constant speed.

The radius of the circular path is determined by the particle's mass, charge, and speed, as well as the strength of the magnetic field. Specifically, the radius is proportional to the particle's momentum and inversely proportional to the magnetic field strength.

The circular motion of a charged particle in a magnetic field is fundamental to many applications in physics and engineering. For example, it is the basis of the operation of particle accelerators, mass spectrometers, and MRI machines.

To learn more about magnetic fields

https://brainly.com/question/3160109

#SPJ4

Complete question:

When a charged particle moves perpendicularly to a uniform magnetic field, what best describes its trajectory? when a charged particle moves perpendicularly to a uniform magnetic field, what best describes its trajectory?

A - a sinusoidal curve

B - a circle

C - a straight line

D - a parabola

Other Questions
the graph below displays the amount of time to the nearest hour spent on homework per week for a sample of students. which measures of center and variability would be most appropriate to describe the given distribution? the debts that rhonda's company will repay within the next _____ are considered to be current debt. The Song: Disney's Part of your world 1. What is the speakers tone in this song? 2. What persona is the speaker trying to become? 3. Is this song an example of a monologue? Explain why or why not? 4. What is the extended metaphor in the song? 5. Provide one example of how imagery is shown in the song. Royal, Inc., is considering a change in its cash-only sales policy. The new terms of sale would be net one month. The required return is 64 percent per month. Current Policy New Policy Price per unit $ 780 $ 780Cost per unit $ 570 $ 570 Unit sales per month 840 890Calculate the NPV of the decision to switch. (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.) NPV $_______ a report claims that the proportion of all adults who are vegetarians is 0.12. believing this claimed value is incorrect, a researcher surveys a large random sample of 1,000 adults and finds that 140 of the adults in the sample are vegetarians. what will the test statistic be equal to in this example? as you are engaging in calculations, try not to do a lot of rounding until you get to the very end, and choose the answer below that is closest to what you calculate. a. 2.5 b. 1.4 c. 1.9 d. 0.3 d. less than 0.1 Why is having free time good for mental health please answer help tcpa regulation, lead gen advertiser tend to shift to lead-to-sales, lead-to-installation. why? how does it works price reductions offered on products and services to stimulate demand during off-peak seasons are referred to as Triangle D has been dilated to create triangle D. Use the image to answer the question.image of a triangle labeled D with side lengths of 2.7, 4.8, 4.2 and a second triangle labeled D prime with side lengths of x, 1.6, 1.4Determine the scale factor used. 2 3 one third one half A recliner is discounted by $190. If the original price is $800, estimate the sale price by first rounding each number to the nearest hundreds The total market value of the common stock of the Okefenokee Real Estate Company is $13.5 million, and the total value of its debt is $8.5 million. The treasurer estimates that the beta of the stock is currently 1.8 and that the expected risk premium on the market is 9%. The Treasury bill rate is 4%. Assume for simplicity that Okefenokee debt is risk-free and the company does not pay tax.a. What is the required return on Okefenokee stock? (Do not round intermediate calculations. Enter your answer as a percent rounded to 2 decimal places.)Required return %b. Estimate the company cost of capital. (Do not round intermediate calculations. Enter your answer as a percent rounded to 2 decimal places.)Cost of capital %c. What is the discount rate for an expansion of the company's present business? (Do not round intermediate calculations. Enter your answer as a percent rounded to 2 decimal places.)Discount rate %d. Suppose the company wants to diversify into the manufacture of rose-colored spectacles. The beta of unleveraged optical manufacturers is 1.15. Estimate the required return on Okefenokee's new venture. (Do not round intermediate calculations. Enter your answer as a percent rounded to 2 decimal places.)Required return % Your client wants to prepay $15 million in notes, which bear interest at a fixed rate of 7.5% per annum, payable quarterly. The notes do not provide for any payments of principal other than at maturity and there are 27 months until maturity. The Note Purchase Agreement provides for the payment of a "Make-Whole Amount" in the vent of prepayment of principal. This is an amount, not less than zero, which is the amount by which (i) the present value of all remaining payments of principal and interest that would be due with regard to the amount of principal that is be prepaid, discounted to the present date by a "Reinvestment Yield," exceeds (ii) the amount of principal that is being prepaid. The "Reinvestment Yield" is equal to the sum of (a) 75 basis points plus (y) the yield to maturity implied by the U.S. Treasury yields for the remaining contractual term of the principal being paid. The current implied US Treasury yield for obligations with 27 months remaining in their term is 2.45%.What is the applicable Make-Whole Amount that is due in connection with the prepayment? Show the Excel formula you used to compute the answer. A parasympathomimetic drug would have no effect on the adrenal gland.O TrueO False What is the difference of the fractions? 4/7 - 10/7 how long ago did the northern atlantic ocean begin to open up or start spreading You find PBB Corp's 2.9% bonds at a price quote of ($)97.3 on the finra.org website. The bond pays semiannually and matures 6 months from now. How many the bond's YTM is _____%. which type of rescue has limited means of entry and exit, is not designed for continuous occupancy, and may include cisterns/wells and utility vaults? gatorade is a well-known drink brand that almost every active person is familiar with, whether you are a professional athlete, hiker, or regular at the gym. the best distribution strategy for this product would be multiple choice intensive. specialized. selective. multichannel. exclusive. consider these functions f(x)=3x^3+8x-2 k(x)=4x what is the value of k(f(x)