miss austin gives her class 6 sets of data and asks them to identify which data set can most accurately be summarized by the mean. what topic is she covering?

In a normal distribution with a mean of 75 and a standard deviation of 5, the approximate value of the median is 75 and approximately 68% of the scores fall between 70 and 75 while 95.45% of the scores lie between two standard deviations below and two standard deviations above the mean.

Standard deviation is a measure of how much variation exists in a set of data. It is used to measure the spread of the data, or how far the data is dispersed from the average. A low standard deviation indicates that data points are close to the average, while a high standard deviation means that the data points are spread out over a wide range of values. Standard deviation is calculated by taking the square root of the variance of the data.

1) The approximate value of the median in a normal distribution with a mean of 75 and a standard deviation of 5 is 75.

2) Approximately 68% of the scores fall between 70 and 75. This can be calculated by using the cumulative probability function for a normal distribution, which is given by: P(x) = 1/2[1 + erf( (x - μ) / (σ*sqrt(2)) ] where μ is the mean, σ is the standard deviation, and erf is the error function. In this case, the cumulative probability of 70 is 0.5 and the cumulative probability of 75 is 0.8413, so the difference of 0.3413 gives the approximate percentage of scores between 70 and 75.

3) Approximately 95.45% of the scores would lie between two standard deviations below and two standard deviations above the mean. This can be calculated by using the cumulative probability function for a normal distribution, which is given by: P(x) = 1/2[1 + erf( (x - μ) / (σ*sqrt(2)) ] where μ is the mean, σ is the standard deviation, and erf is the error function. In this case, the cumulative probability of two standard deviations below the mean is 0.02275 and the cumulative probability of two standard deviations above the mean is 0.97725, so the difference of 0.9545 gives the approximate percentage of scores between two standard deviations below and two standard deviations above the mean.

To know more about standard deviations click-
https://brainly.com/question/475676
#SPJ1

Complete questions as follows-
Given a normal distribution with a mean of 75 and a standard deviation of 5, answer the following questions:

1) What is the approximate value of the median?

2) What percentage of scores fall between 70 and 75?

3) What percentage of the scores would lie between two standard deviations below and two standard deviations above the mean?

Even though the first student scored 150, the expected average IQ score for the remaining four students is still 100.

Explain average

The average is a statistical measure that represents the central tendency of a set of values. It is calculated by adding up all the values and dividing them by the total number of values. The average provides a single value that represents the typical value in the set and is often used to compare different sets of data or to summarize large amounts of data.

According to the given information

Let X be the random variable representing the IQ score of an individual student. Then, the sample mean of the five students, denoted by Y, can be expressed as:

Y = (X1 + X2 + X3 + X4 + X5) / 5

Given that the first student scored 150, the expected value of the sample mean of the remaining four students, denoted by E(Y|X1=150), can be calculated as follows:

E(Y|X1=150) = E((X2 + X3 + X4 + X5) / 4 | X1 = 150)

Since X1 = 150 is an observed value, we can treat it as a constant and apply the linearity of expectation:

E((X2 + X3 + X4 + X5) / 4 | X1 = 150) = (E(X2 | X1 = 150) + E(X3 | X1 = 150) + E(X4 | X1 = 150) + E(X5 | X1 = 150)) / 4

Now, since the sample is random, the remaining four IQ scores are also independent and identically distributed as X, with the same mean of 100. Therefore, we have:

E(X2 | X1 = 150) = E(X3 | X1 = 150) = E(X4 | X1 = 150) = E(X5 | X1 = 150) = E(X)

Thus, we can simplify the expression as:

E(Y|X1=150) = (4E(X) / 4) = E(X) = 100

To know more about average visit

brainly.com/question/27193544

#SPJ1

Answer:

Step-by-step explanation:

If the solutions are x = -3 and x = -1, then (x - 3) (x - 1) will give us our answer. Using the FOIL method,

(x - 3) (x - 1)

x^2 - x - 3x + 3

x^3 - 4x + 3 = 0

Your answer is 3

Since cosine is negative and a is in quadrant III, we know that sine is positive. We can use the Pythagorean identity to solve for sine:

sin^2(a) + cos^2(a) = 1

sin^2(a) + (-5/9)^2 = 1

sin^2(a) = 1 - (-5/9)^2

sin^2(a) = 1 - 25/81

sin^2(a) = 56/81

Taking the square root of both sides:

sin(a) = ±sqrt(56/81)

Since a is in quadrant III, sin(a) is positive. Therefore:

sin(a) = sqrt(56/81) = (2/3)sqrt(14)

Becca made a mistake while constructing triangle DEF by using the angles 50°, 65°, and 65°. The mistake she made was violating the triangle inequality theorem.

According to the theorem, the sum of any two sides of a triangle must be greater than the third side. In other words, if we add the lengths of two sides of a triangle, it must be greater than the length of the third side.

Since Becca only used angles to construct the triangle, she did not consider the side lengths of the triangle. Therefore, there is a possibility that the triangle she constructed does not satisfy the triangle inequality theorem, and it may not be a valid triangle.

In order to ensure the triangle is valid, Becca needs to consider the side lengths while constructing the triangle. She could use trigonometric ratios or a ruler and protractor to measure the side lengths and angles accurately.

To know more about triangle inequality theorem here

https://brainly.com/question/1163433

#SPJ4

The length of arc PQ is 110 degrees

Knowing that the arc lengths are in degrees and the total for a circle is 360 degrees then we have the equation

8x - 10 + 6x + 10x + 10 = 360

To solve the equation 8x - 10 + 6x + 10x + 10 = 360 for x, we first need to simplify the left side of the equation by combining like terms:

8x + 6x + 10x - 10 + 10 = 24x

Now the equation becomes:

24x = 360

To solve for x, we need to isolate x on one side of the equation by dividing both sides by 24:

24x/24 = 360/24

x = 15

Therefore, the solution for x is 15.

Arc PQ = 8x - 10

= 8 * 15 - 10

= 110 degrees

Learn more about circle at

https://brainly.com/question/24375372

#SPJ1

Answer:

Answer is 20

Step-by-step explanation:

When two lines intersect each other as a result of that, every opposite angles are equal

so,

6x+20 = 140

6x = 120

x = 120/6

x = 20

Answer:

x = 20

Step-by-step explanation:

Vertically opposite are equal

therefore

6x + 20 = 140

6x = 140-20

6x = 120

6x/6 = 120/6

x = 20

Trigonometric functions are used to model relationships between angles and sides of a right triangle. They are particularly useful in solving problems that involve angles, distances, heights, and lengths that are difficult to measure directly.

For example, consider a problem that involves finding the height of a building. By measuring the length of the shadow cast by the building at a particular time of day, the angle of the sun's rays can be calculated using trigonometry. Once the angle is known, the height of the building can be determined using the tangent function.

In contrast, a non-trigonometric function may not be able to model the relationship between the given quantities in such problems, and may not provide an accurate solution. Therefore, when a problem involves angles or distances that are not directly measurable, trigonometric functions are typically the best tool for setting up and solving the problem.

To know more about trigonometric functions

https://brainly.com/question/6904750

#SPJ4

From the given information, you can deduce that triangle QTR is equilateral and equiangular (all angles are 60 degrees)

b, c, d, and f are true

The opposite angles of a parallelogram are congruent (b)

If 2 parallel lines are cut by a transversal, then the corresponding angles are congruent (d)

Angle RQT is congruent to angle QRT, and angle QRT is congruent to angle S. By the transitive property, angle RQT is congruent to angle S (c)

Transitive property, like c (f)

Answer:

The comparison that is not correct is:

C. -8 > -6

This is not correct because -8 is actually less than -6. Therefore, the correct comparison would be -8 < -6.

The other comparisons are correct:

A. 1 > -9 (true, because 1 is greater than -9)

B. 3 < 6 (true, because 3 is less than 6)

D. -3 < 4 (true, because -3 is less than 4)

Note that both of these absolute value inequalities have the same solution set as 5 < x < 7.

Inequality refers to the state of being unequal, uneven, or unfair in terms of social, economic, political, or other factors. It can be the result of various factors such as discrimination, prejudice, systemic biases, and unequal distribution of resources, opportunities, and power. Inequality can manifest itself in many forms, including income and wealth disparities, unequal access to education, healthcare, and housing, unequal treatment under the law, and marginalization of certain groups based on their race, gender, sexual orientation, religion, or other characteristics. Addressing inequality is an important challenge in creating a more just and equitable society.

to write an absolute value inequality with a solution set of 5 < x < 7, we need to use the form |x - b| < c, where b is the center of the solution set and c is the distance from the center to the edge of the solution set.

In this case, the center of the solution set is (5 + 7)/2 = 6, and the distance from the center to the edge is (7 - 5)/2 = 1.

Therefore, we can write the absolute value inequality as:

[tex]| x - 6 | < 1[/tex]

Alternatively, we can use the form |x - b| > c and write the absolute value inequality as:

[tex]x < 5 or x > 7[/tex]

Note that both of these absolute value inequalities have the same solution set as 5 < x < 7.

To know more about inequalities visit:

https://brainly.com/question/30228778

#SPJ1

Answer: 3 pieces

Step-by-step explanation:First, 6/8 can be converted into fourths by dividing the numerator and the denominator by 2 and we get 3/4. if we want 1/4 slices we divide 3/4 by 1/4 and get 3.

The reasonableness of the estimate depends on the quality and reliability of the data sources and methodology used to arrive at the estimate.

In order to determine whether 12% is a reasonable estimate of the proportion of all Americans who eat chocolate

frequently, we would need to define what is meant by "frequently."

If we define "frequently" as "at least once a week," then 12% may or may not be a reasonable estimate, depending on

the data source and methodology used to arrive at that estimate.

For example, if the estimate is based on a small sample size or a non-representative sample of the population, then it

may not be a reliable estimate of the true proportion of Americans who eat chocolate frequently. Additionally, if the

estimate is several years old, it may not accurately reflect current trends and habits.

On the other hand, if the estimate is based on a large, nationally representative sample of the population, and is

relatively recent, then 12% could be a reasonable estimate of the proportion of Americans who eat chocolate

frequently.

for such more question on frequently

https://brainly.com/question/29985480

#SPJ11

The long-run fraction of time that there is exactly one lightbulb working (event O) is: 0.228.

Let's use the following notation:

Let W denote the event that both lightbulbs are working,

let O denote the event that one lightbulb is working, and

let B denote the event that both lightbulbs are burnt out.

We are given that when both lightbulbs are working (event W), one of them will go out with probability 0.03.

Therefore, the probability that both lightbulbs will still be working on the next day is 1 - 0.03 = 0.97.

On the other hand, when only one lightbulb is working (event O), it will burn out with probability 0.07, and the other lightbulb is already burnt out.

Hence, the probability of moving from O to B is 1.

We can set up the following system of equations to model the probabilities of being in each state on the next day:

P(W) = 0.97P(W) + 0.5P(O)

P(O) = 0.03P(W) + 0.93P(O) + 1P(B)

P(B) = 0.07P(O)

Note that in the first equation, we use 0.97 because the probability of staying in W is 0.97, and the probability of moving to O is 0.5 (because there are two ways for one of the lightbulbs to go out).

Simplifying the system of equations, we get:

0.03P(W) - 0.5P(O) = 0

-0.03P(W) + 0.07P(O) - 1P(B) = 0

0P(W) - 0.07P(O) + 1P(B) = 0

Solving for P(O), we get:

P(O) = 0.3P(W)

Substituting this into the second equation, we get:

-0.03P(W) + 0.07(0.3P(W)) - P(B) = 0

Simplifying, we get:

P(B) = 0.004P(W)

We also know that the sum of the probabilities of being in each state must be 1:

P(W) + P(O) + P(B) = 1

Substituting the expressions for P(O) and P(B), we get:

P(W) + 0.3P(W) + 0.004P(W) = 1

Solving for P(W), we get:

P(W) = 0.762

Therefore, the long-run fraction of time that there is exactly one lightbulb working (event O) is:

P(O) = 0.3P(W) = 0.228.

Approximately 22.8% of the time, there will be exactly one lightbulb working.

For similar question on probabilities.

https://brainly.com/question/28764815

#SPJ11

Using the standard normal distribution, we find that approximately 73.8% of workers receive wages between $4.75 and $5.69 per hour. Using the inverse of the standard normal distribution, we find that the highest 5% of hourly wages are greater than approximately $6.09.

Using a standard normal distribution table or calculator with a mean of 5.25 and a standard deviation of 0.60, we can find that approximately 79.42% of workers receive wages between $4.75 and $5.69 per hour.

Using a standard normal distribution table or calculator, we can find the z-score corresponding to the highest 5% of wages, which is approximately 1.645.

Then, we can solve for x in the equation z = (x - μ) / σ, where z is the z-score, μ is the mean of 5.25, and σ is the standard deviation of 0.60. This gives us x = zσ + μ, which is approximately $6.09 per hour. Therefore, the highest 5% of hourly wages are greater than $6.09 per hour.

To know more about standard normal distribution:

https://brainly.com/question/29509087

#SPJ4

The value of x for the intersecting chords is derived to be 1.9 and the segment FS is equal to 18

The property of intersecting chords states that in a circle, if two chords intersect, the product of the lengths of the segments of one chord is equal to the product of the lengths of the segments of the other chord.

UF × FS = VF × FT

8(10x - 1) = 9 × 16

80x - 8 = 144

80x = 144 + 8 {collect like terms}

80x = 152

x = 152/80 {divide through by 80}

x = 1.9

FS = 10(1.9) - 1 = 18

Therefore, the value of x for the intersecting chords is derived to be 1.9 and the segment FS is equal to 18

Read more about intersecting chords here:https://brainly.com/question/13950364

#SPJ1

Out of a group of ten men & eight women, there are 1320 possible ways to form a committee of two men and one woman.

Numbers are mathematical units of measurement and labelling. It is a sign or collection of symbols that are used to represent a quantity, usually a real or integer number.

Out of a group of ten men & eight women, there are 1320 possible ways to form a committee of two men and one woman. The idea of combination can be used to arrive to this number.

Calculating the number of possible combinations of a given number of things is done mathematically using the concept of combination. C(n,r) = n! / (r! (n - r)!), where n is the total number of items and r is the number of things to be picked at a time, is the formula used to compute it. In this instance, r is the number of persons to be picked, which is 3, and n is the total number of people to be chosen from the group, which is 18, consisting of 10 males and 8 women.

As a result, there are a total of 10 ways for men and 8 ways for women to form a committee of two men and one woman C(18,3) = 18! / (3! (18 - 3)!) = 18! / (3! 15!) = 1320.

Thus, there are 1320 different methods to create a committee of two men and one woman out of a group of ten men and eight women.

To know more about Combination, visit:

https://brainly.com/question/28065038

#SPJ1

The two column proof is written as follows

Statement                                                           Reason

MA = XR                                           given (opposite sides of rectangle)

MK = AR                                           given (opposite sides of rectangle)

arc MA = arc RK                               Equal chords have equal arcs

arc MK = arc AK                               Equal chords have equal arcs

An arc is a portion of the circumference of a circle, and a chord is a line segment that connects two points on the circumference.

If two chords in a circle are equal in length, then they will cut off equal arcs on the circumference. This is because the arcs that the chords cut off are subtended by the same central angle.

Learn more on circle theorem at:

https://brainly.com/question/6240879

#SPJ1

Answer:

The y-intercept is at (0, 8).

Answer: (0,8)

Step-by-step explanation: The line only touches the Y-axis Once and its on 8

A statement that is best supported by the data in the box plots include the following: H. the interquartile range of the data for the community college is greater than the interquartile range of the data for the university.

In Mathematics and Statistics, a box plot is a type of chart that can be used to graphically represent the five-number summary of a data set with respect to locality, skewness, and spread.

Mathematically, interquartile range (IQR) of a data set is typically calculated as the difference between the first quartile (Q₁) and third quartile (Q₃):

Interquartile range (IQR) of university = Q₃ - Q₁

Interquartile range (IQR) of university = 15 - 9

Interquartile range (IQR) of university = 6.

For the community college, we have;

Interquartile range (IQR) = 15 - 6

Interquartile range (IQR) = 9.

Therefore, 9 is greater than 6.

Read more on interquartile range (IQR) here: brainly.com/question/17658705

#SPJ1

a) Classroom:

Perimeter = 2(length + breadth) = 2(10m + 8m) = 36m

Area = length x breadth = 10m x 8m = 80m^2

Volume = length x breadth x height = 10m x 8m x 3m = 240m^3

b) Box:

Perimeter = 2(length + breadth) = 2(40cm + 25cm) = 130cm

Area = 2(length x breadth + length x height + breadth x height) = 2(40cm x 25cm + 40cm x 30cm + 25cm x 30cm) = 41500cm^2

Volume = length x breadth x height = 40cm x 25cm x 30cm = 30000cm^3

c) Cabinet:

Perimeter = 2(length + breadth) = 2(80cm + 70cm) = 300cm

Area = 2(length x breadth + length x height + breadth x height) = 2(80cm x 70cm + 80cm x 2m + 70cm x 2m) = 12640cm^2

Volume = length x breadth x height = 80cm x 70cm x 2m = 112000cm^3

Note: It's important to use consistent units in calculations. In this case, I converted the dimensions to a common unit (meters or centimeters) before performing the calculations.

Learn more about perimeter from

https://brainly.com/question/12980902

#SPJ1

Para entender mejor esta función, podemos expandirla y simplificarla:

f(x) = (x+2)(-x+6)

f(x) = [tex]-x^2 + 4x + 12[/tex]

Esta es una función cuadrática, lo que significa que tiene la forma de una parábola. El término cuadrático ([tex]-x^2[/tex]) hace que la parábola tenga una concavidad hacia abajo, lo que significa que el valor máximo de la función se encuentra en el vértice de la parábola.

Podemos encontrar el valor del precio de venta que maximiza la ganancia utilizando la fórmula x = -b/(2a), donde "a" es el coeficiente del término cuadrático y "b" es el coeficiente del término lineal.

En este caso, a = -1 y b = 4, por lo que:

x = -4/(2-1)

x = -4/-2

x = 2

Por lo tanto, el precio de venta que maximiza la ganancia es de 2 por unidad. Si se venden las unidades a este precio, la ganancia total sería de:

f(2) = [tex]-2^2 + 4(2) + 12[/tex]

f(2) = -4 + 8 + 12

f(2) = 16 dólares

Es importante tener en cuenta que la función f(x) también puede ser utilizada para calcular la ganancia total para cualquier precio de venta "x". Por ejemplo, si se venden las unidades a 3 por unidad, la ganancia sería:

f(3) = [tex]-3^2 + 4(3) + 12[/tex]

f(3) = -9 + 12 + 12

f(3) = 15 dólares

for such more question on mejor esta

https://brainly.com/question/1030576

#SPJ11

Answer:

Step-by-step explanation:

its a rectanlge

Answer:

1

Step-by-step explanation:

First of all we use the "law of sines"

to get the measure/length we need the opposing angle of it of the side, now in this case the missing side is x

and its opposing angle is missing so using common sense, the sum of angles in the triangle is 180°

180°=70°+51°+ x

x = 180°-121°

=59°

Using law of sines:

(sides are represented by small letters/capital letters are the angles)

a/sinA= b/sinB= c/sinC

We have one given side which is "9"

so,

9/sin70= x/sin59

doing the criss-cross method,

9×sin59=sin70×x

9×sin59/sin70=x

x=8.2 (answer 1)

I hope this was helpful <3

the answer is (D) XY = 11 mm, YZ = 12 mm, XZ = 28 mm would NOT form a triangle with vertices X, Y, and Z.

How to solve the question?

To determine whether a triangle can be formed using the given side lengths, we need to apply the Triangle Inequality Theorem, which states that the sum of any two sides of a triangle must be greater than the third side.

Let's check each option:

A. XY = 11 mm, YZ = 12 mm, XZ = 18 mm

To form a triangle, we need to check whether the sum of any two sides is greater than the third side. Let's check:

XY + YZ = 11 mm + 12 mm = 23 mm > XZ = 18 mm

YZ + XZ = 12 mm + 18 mm = 30 mm > XY = 11 mm

XY + XZ = 11 mm + 18 mm = 29 mm > YZ = 12 mm

All the combinations are greater than the third side, so a triangle can be formed with these side lengths.

B. XY = 16 mm, YZ = 12 mm, XZ = 23 mm

Let's check whether the sum of any two sides is greater than the third side:

XY + YZ = 16 mm + 12 mm = 28 mm > XZ = 23 mm

YZ + XZ = 12 mm + 23 mm = 35 mm > XY = 16 mm

XY + XZ = 16 mm + 23 mm = 39 mm > YZ = 12 mm

Again, all the combinations are greater than the third side, so a triangle can be formed with these side lengths.

C. XY = 16 mm, YZ = 17 mm, XZ = 18 mm

Let's check whether the sum of any two sides is greater than the third side:

XY + YZ = 16 mm + 17 mm = 33 mm > XZ = 18 mm

YZ + XZ = 17 mm + 18 mm = 35 mm > XY = 16 mm

XY + XZ = 16 mm + 18 mm = 34 mm > YZ = 17 mm

All the combinations are greater than the third side, so a triangle can be formed with these side lengths.

D. XY = 11 mm, YZ = 12 mm, XZ = 28 mm

Let's check whether the sum of any two sides is greater than the third side:

XY + YZ = 11 mm + 12 mm = 23 mm < XZ = 28 mm

YZ + XZ = 12 mm + 28 mm = 40 mm > XY = 11 mm

XY + XZ = 11 mm + 28 mm = 39 mm > YZ = 12 mm

The first combination is less than the third side, so a triangle cannot be formed with these side lengths.

Therefore, the answer is (D) XY = 11 mm, YZ = 12 mm, XZ = 28 mm would NOT form a triangle with vertices X, Y, and Z.

To know more about triangles visit :-

https://brainly.com/question/17335144

#SPJ1

Translate the solid circle 2 units to the left and 2 units down and dilate the solid circle by a scale factor of 2. and the circles are similar

(a) To move the solid circle exactly onto the dashed circle, we need to perform the following transformations:

Therefore, the blank spaces should be filled as follows:

Translate the solid circle 2 units to the left and 2 units down.

Dilate the solid circle by a scale factor of 2.

(b) Yes, the original solid circle and the dashed circle are not similar, because they have different radii.

This is because all circles are similar

Read more about transformation at

https://brainly.com/question/27224272

#SPJ1

Answer:

135.07 mm2

Step-by-step explanation:

height = 10.39 mm

area = 135.07 mm2

Answer:

7

(

x

−

2

)

−

7

x

−

14

=

0

7

(

x

−

2

)

−

7

x

−

14

=

07

(

x

−

2

)

−

7

x

−

14

=

0

Step-by-step explanation:

Answer: 0 = 0

Step-by-step explanation: i showed the steps with these screen shots