molecular formula of C4H5​

Answer:

Percent error = 3.7%

Explanation:

Given data:

Density of Al cylinder = ?

Weight of cylinder = 18 g

Diameter = 1.3 cm

Height = 5.2 cm

Actual density of Al = 2.7 g/cm³

Percent error = ?

Solution:

First of all we will calculate the volume of cylinder through given formula.

V = πr²h

r = diameter /2

V = 22/7 × (0.65 cm)²× 5.2 cm

V = 22/7 × 0.4225cm²× 5.2 cm

V = 6.89 cm³

Now we will calculate the density.

d = m/v

d = 18 g/ 6.89 cm³

d = 2.6 g/cm³

Percent error:

Percent error = measured value - actual value /actual value × 100

Percent error = 2.6g/cm³ - 2.7g/cm³ /2.7g/cm³  × 100

Percent error = 3.7%

Negative sign shows that measured or experimental value is less than actual value.

Answer:

C. molten rock below Earth’s surface

Explanation:

This question is incomplete, the complete question is;

Tonksite is a solid at 300.00K.  At 300.00 K its enthalpy of sublimation is 66.00 kJ/mol. The sublimation pressure at 300.00 K is 5.00 × 10⁻⁴ atm

Calculate the sublimation pressure of the solid at the melting point of 400.00 K assuming that the enthalpy of sublimation is not a function of temperature.

Answer: the sublimation pressure of the solid at the melting point is  0.3727 atm

Explanation:

Given that;

T1 = 300 K

T2 = 400 K

H_sub = 66 kJ/mol = 66000 J/mol

P1 = 5.00 × 10⁻⁴ atm

p2 = ?

now using the expression

log( p2 / 5.00 × 10⁻⁴ ) = (H_sub / R ×  2.303 ) (( T2 - T1) / T1T2)

now we substitute of given values into the expression

log(p2/p1) = (66000 / 8.314 ×  2.303 ) (( 400 - 300) / 300 × 400 )

p2 = 0.3727 atm

therefore the sublimation pressure of the solid at the melting point is  0.3727 atm

Answer:

true

Explanation:

hope it helps

Answer:

I'm pretty sure it's true

Explanation:

20 characters

Answer:

Explanation:

Silk and wool

Answer:

silk and wool fibers are obtained from animals ​

Explanation:

good luck :)

Answer:

C6H1206

Explanation:

C6H12O6 is a monomer of carbohydrates also known as glucose, so it is not an electrolyte at all.

Answer:

u measure how much power it has

Explanation:

for example u can power a light bulb woth it if u can it was 100eg energy

Answer:

molar mass of unknown gas = 1.987 g/mol

Explanation:

First, the number of moles of the unknown gas is found

Using the ideal gas equation: PV = nRT

P = 1.00 atm, V = 5.00 L, T = 298.15 K, R = 0.082 L.atm.mol⁻¹K⁻¹

n = PV/RT

n = (1.00 atm * 5.00 L)/(298.15 K *0.082 L.atm.mol⁻¹K⁻¹)

n = 0.2109 moles

Molar mass = mass/ number of moles

molar mass = 0.419 g/ 0.2109 mols

molar mass of unknown gas = 1.987 g/mol

The molar mass of unknown gas by using ideal gas equation = 1.987 g/mol.

This equation gives the relation between pressure, volume, temperature as given below:

[tex]PV = nRT[/tex]

P = 1.00 atm, V = 5.00 L, T = 298.15 K, R = 0.082 L.atm.mol⁻¹K⁻¹

Substitute the above values in the above equation as follows:

n = (1.00 atm * 5.00 L)/(298.15 K *0.082 L.atm.mol⁻¹K⁻¹)

n = 0.2109 moles

[tex]Molar mass = mass/ number of moles[/tex]

Calculate molar mass by using the above equation,

molar mass = 0.419 g/ 0.2109 moles

The molar mass of unknown gas = 1.987 g/mol

Find more information about ideal gas equation here,

brainly.com/question/4147359

Answer : The number of moles of precipitate, [tex]PbBr_2[/tex] formed will be 0.01 moles.

Explanation : Given,

Concentration of NaBr = 0.200 M

Volume of solution = 100.0 mL = 0.1 L      (1 L = 1000 mL)

First we have to calculate the moles of NaBr.

[tex]\text{Moles of NaBr}=\text{Concentration of NaBr}\times \text{Volume of solution in L}[/tex]

[tex]\text{Moles of NaBr}=0.200M\times 0.1L=0.02mol[/tex]

Now we have to calculate the moles of precipitate, [tex]PbBr_2[/tex] formed.

The balanced chemical reaction is:

[tex]2NaBr(aq)+Pb(NO_3)_2(aq)\rightarrow PbBr_2(s)+2NaNO_3(aq)[/tex]

From the balanced chemical reaction we conclude that:

As, 2 moles of NaBr react to give 1 mole of [tex]PbBr_2[/tex]

So, 0.02 moles of NaBr react to give [tex]\frac{0.02}{2}=0.01[/tex] mole of [tex]PbBr_2[/tex]

Therefore, the number of moles of precipitate, [tex]PbBr_2[/tex] formed will be 0.01 moles.

The number of mole of the precipitate (i.e PbBr₂) formed when 100 mL of 0.2 M NaBr react with excess Pb(NO₃)₂ is 0.01 mole

Volume = 100 mL = 100 / 1000 = 0.1 L

Molarity of NaBr = 0.2 M

Mole = Molarity x Volume

Mole of NaBr = 0.2 × 0.1

2NaBr(aq) + Pb(NO₃)₂(aq) → PbBr₂(s) + 2NaNO₃ (aq)

From the balanced equation above,

2 moles of NaBr reacted to produce 1 mole of PbBr₂.

Therefore,

0.02 mole of NaBr will react to produce = [tex]\frac{0.02}{2} \\\\[/tex] = 0.01 mole of PbBr₂.

Thus, the number of mole of the precipitate (i.e PbBr₂) produced from the reaction is 0.01 mole

Learn more: https://brainly.com/question/19572703

Answer:

ΔU = −55.45 kJ

Explanation:

From first law of thermodynamics in chemistry, we have;

ΔU = Q + W

where;

ΔU is change in internal energy

Q is the net heat transfer

W is the net work done

We are given;

Q = 74.6 kJ

But Q will be negative since heat is released

Thus;

ΔU = -74.6 kJ + W

We are given;

Constant pressure; P = 35 atm = 35 × 101325 = 3546375 N/m²

Volume before reaction; Vi = 8.2 L = 0.0082 m³

Volume after reaction; V_f = 2.8 L = 0.0028 m³

Now,

W = -P(V_f - V_i)

W = - 3546375(0.0028 - 0.0082)

W = 19.15 KJ

Thus;

ΔU = Q + W

ΔU = -74.6 kJ + 19.15 KJ =

ΔU = −55.45 kJ

Answer:

A chemical formula tells us the number of atoms of each element that is in a compound. It contains the symbols of the atoms for the elements present in the compound as well as how many there are for each element in the form of subscripts.

Hope this helps! please mark me brainliest!

God bless :)

Answer:

6.25e-6 is the value of the equilibrium constant

Explanation:

we have this equation

[tex]PbBr(s) ----- Pb^{2+}(aq) + 2Br(aq)[/tex]

When at a state of equilibrium,

we have the concentration of Pb^2+ to be 0.01

we have the concentration of Br^- to be 0.025

the equilibrium constant concentration of both pure solids and liquid s are said to be equal to 1

[PbBR2] = 1

such tht

Keq = [Pb^2+] x [Br-]^2

we already know the values of these from the above.

0.01x0.025^2

= 0.01 x 0.000625

= 0.00000625

= 6.25 x 10^-6

= 6.25e^-6

Answer:I think it would be the third one.

Explanation:

Answer:

2.28 atm

Explanation:

V₁ = 2.33L,  V₂ = 1.08L

T₁ = 289K,  T₂ = 304K

P₁ = 1.05 atm, P₂ = ?

Where V₁ and V₂ are initial and final volume respectively

T₁ and T₂ are initial and final temperature respectively

P₁ and P₂ are initial and final pressure respectively

The formula to be used here is the general gas equation:

P₁V₁/T₁=P₂V₂/T₂

1.05 × 2.23/289 = P₂ × 1.08/304

P₂ × 1.08 × 289 = 1.05 × 2.23 × 304

P₂ = (1.05 × 2.23 ×304) ÷ (1.08 × 289)

P₂ = 711.82 ÷ 312.12

P₂ = 2.28 atm

Answer:

The theoretical yield of CaS is 6.01 g.

Explanation:

The balanced reaction is given as:

[tex]Ca+S\rightarrow CaS[/tex]

The molar mass of Ca and S is 40.08 and 32.065 g/mol respectively.

Number of moles = [tex]\frac{Mass}{Molar Mass}[/tex]

So, 7.19 g of Ca contains [tex](\frac{7.19}{40.08})[/tex] mol of Ca or 0.179 mol of Ca

Also, 2.67 g of S contains [tex](\frac{2.67}{32.065})[/tex] mol of S or 0.0833 mol of S

According to the balanced equation:

1 mol of Ca produces 1 mol of CaS

So, 0.179 mol of Ca produces 0.179 mol of CaS

According to the balanced equation:

1 mol of S produces 1 mol of CaS

So, 0.0833 mol of S produces 0.0833 mol of CaS

As the least number of mol of CaS (product) is produced from S , therefore, S is the limiting reactant.

So, thoretically, 0.0833 mol of CaS is produced.

The molar mass of CaS is 72.143 g/mol.

So, the mass of 0.0833 mol of CaS is [tex](0.0833\times 72.143)[/tex] g or 6.01 g

Hence, the theoretical yield of CaS is 6.01 g.

Answer:

29.8

Explanation:

The formula for volume is mass/ density, so 59/1.98. 29.8 is the answer.

Answer:

Explanation:

Half life of radioactive materials do not depend upon the mass of the material . It only depends upon the nature of radioactive materials . The half life of 20 g is 232 seconds . That means 20 gram will be reduced to 10 gram in 232 seconds .

Half life of 80 gram is also 232 seconds . So , 80 gram will be reduced to 40 gram in 232 second .

Answer:

[tex]p=26683.2Pa[/tex]

Explanation:

Hello,

In this case, since the pressure is computed via:

[tex]p=h*\rho*g[/tex]

Whereas h is the 0.520-m height, [tex]\rho[/tex] is the 13600-kg/m³ density and the g the 9.81-m/s² gravity. Thus, the pressure in Pa is:

[tex]p=0.20m*13,600 \frac{kg}{m^3} *9.81\frac{m}{s^2} \\\\p=26683.2\frac{kg*\frac{m}{s^2} }{m^2} =26683.2\frac{N}{m^2}\\ \\p=26683.2Pa[/tex]

Best regards.

Answer:

swap

Explanation: because it is a low wet land

Answer:

4.   swamp

5.   Island

Plz mark brainliest:)

Answer:

[tex]T=2.78x10^3 \°C[/tex]

Explanation:

Hello,

In this case, considering that the safe temperature may be computed via the ideal gas law as we now the pressure, mass and volume via the dimensions:

[tex]V=\pi r^2 h=\pi *(41.0cm)^2*49.2cm=2.60x10^5cm^3*\frac{1L}{1000cm^3} =260L[/tex]

The pressure in atm is:

[tex]P=3.70MPa*\frac{1x10^6Pa}{1MPa} \frac{1atm}{101325Pa} =36.5atm[/tex]

And the moles considering the mass and molar mass (66 g/mol) of dinitrogen difluoride (N₂F₂):

[tex]n_{N_2F_2}=2.50kg*\frac{1000g}{1kg}*\frac{1mol}{66g} =37.9mol[/tex]

In sich a way, by applying the ideal gas equation, which is not the best assumption but could work as an approximation due to the high temperature, the temperature, with three significant figures, will be:

[tex]T=\frac{PV}{nR}=\frac{36.5Pa*260L}{37.9mol*0.082\frac{atm*L}{mol*K} }\\ \\T=3053.6K-273.15\\\\T=2.78x10^3 \°C[/tex]

Best regards.

Answer:

true

Explanation:

I'm not sure why cause I dont know how to explain but it's TRUE

Answer:

True  

Explanation:

The particles moving faster in a substance the hotter it gets.

Answer: The answer is 5.15x10^22

Explanation:

The formula unit present in a teaspoon of salt [tex]NaCl[/tex] having a mass of about 5.0 g is [tex]5.15 \times10^{22}[/tex] formula units.

Molar mass, also known as molecular weight, is the mass of one mole of a substance. It is calculated by summing up the atomic masses of all the atoms in a molecule. The unit of molar mass is grams per mole (g/mol).

Now, to determine the number of formula units in a teaspoon of salt (NaCl), we need to use Avogadro's number and the molar mass of NaCl.

Avogadro's number [tex](N_a)[/tex] is approximately. [tex]6.022 \times10^{23}[/tex] formula units per mole.

The molar mass of [tex]NaCl[/tex] is the sum of the atomic masses of sodium (Na) and chlorine ([tex]Cl[/tex]), which are approximately 22.99 g/mol and 35.45 g/mol, respectively.

To calculate the number of formula units in 5.0 g of [tex]NaCl[/tex], we can follow these steps:

Now, calculate the number of moles of [tex]NaCl[/tex] using its molar mass:

Moles = Mass / Molar mass

Moles = [tex]5.0 g[/tex] / [tex](22.99 g/mol + 35.45 g/mol)[/tex]

Calculate the number of formula units using Avogadro's number:

Formula units = [tex]Moles \times Avogadro's number[/tex]

Let's perform the calculation:

Molar mass of [tex]NaCl[/tex]= [tex]22.99 g/mol + 35.45 g/mol = 58.44 g/mol[/tex]

Moles of [tex]NaCl[/tex] = [tex]5.0 g[/tex] / [tex]58.44 g/mol[/tex] ≈ [tex]0.0856 mol[/tex]

Formula units = [tex]0.0856 mol \times (6.022 \times 10^{23})[/tex] formula units/mol ≈ [tex]5.15 \times10^{22}[/tex]formula units.

Therefore, there are approximately [tex]5.15 \times10^{22}[/tex] formula units in a teaspoon of salt ([tex]NaCl[/tex]) having mass [tex]5.0 g[/tex].

Learn more molar mass about here:

https://brainly.com/question/31545539

#SPJ2

Answer. After cytokinesis is completed at end of meiosis - I two haploid cells are formed.on:

Answer:

C. TWO HAPLOID CELLS ARE FORMED

Explanation:

I TOOK THE EDGUNITY TEST AND I GOT IT CORRECT

Answer:

= .7567105263

Explanation:

1 atm = 760 mmHg

575.1 mmHg (1 atm/760mmHg) = .7567105263 atm

Answer: The answer is D.

Explanation:

The form of energy associated with the motion, position, or shape of an object is called mechanical energy. An object's mechanical energy is a combination of its potential energy and its kinetic energy. The basketball has both potential energy and kinetic energy.

Hope this helps!

Answer:

See detailed explanation.

Explanation:

Hello.

In this case, it is firstly necessary to cite that EGS accounts enhanced geothermal systems which are man-made reservoirs, placed where lots of  hot rock is present but there is lack natural permeability, which requires a fluid to be injected into the subsurface to re-open it and therefore creating permeability.

Typically, water has been used for this purpose, but due to the current issue on saving water alternative methods such as supercritical fluids has been being implemented because they have better dynamic properties such as lower viscosities and therefore larger flow velocities, supercritical CO2 is easy and cheap to get as low temperatures are required to turn it in supercritical condition.

Best regards.!

Answer:

380

Explanation:

Answer:

1) Increases

2) decreases

3) increases

4) decreases

Explanation:

When the intermolecular forces in a liquid increases, the greater vapour pressure of the liquid decreases accordingly.

Since the vapour pressure is proportional to temperature, as temperature increases, the vapour pressure increases alongside.

As intermolecular forces increases, the boiling point increases accordingly since more energy is required to break intermolecular bonds.

Lastly, the greater the surface area, tell greater the vapour pressure since more liquid surface area is now available.