NEED HELP ASAP +POINTS
a swimmer preparing for a competition should train for no more than 60% of her normal training time. enter an inequality that represents all possible values for the time, t, in minutes, that the swimmer should train given her normal training time is 90 minutes

The 95% confidence interval for the true proportion of students who work a part-time job is approximately (0.4014, 0.4986), and the margin of error is approximately 0.0486. So, the closest answer among the options provided is 0.049.

To construct a 95% confidence interval for the true proportion of students who work a part-time job and find the margin of error, follow these steps:

1. Determine the sample proportion (p-hat):

Divide the number of students who work a part-time job (180) by the total number of students (400).
p-hat = [tex]\frac{180}{400}=0.45[/tex]

2. Determine the critical value (z) for a 95% confidence interval. Using a z-table, the critical value is approximately 1.96.

3. Calculate the standard error (SE) of the sample proportion:

SE =[tex]\frac{\sqrt{(p-hat)(1-p-hat)}}{n}[/tex] = [tex]\frac{\sqrt{(0.45)(1-0.45)}}{400}[/tex]≈ 0.0248

4. Calculate the margin of error (ME) by multiplying the critical value (z) by the standard error (SE):
ME = 1.96×0.0248 ≈ 0.0486

5. Construct the confidence interval by adding and subtracting the margin of error from the sample proportion:
Lower bound: 0.45 - 0.0486 ≈ 0.4014
Upper bound: 0.45 + 0.0486 ≈ 0.4986

So, the closest answer among the options provided is the fourth option 0.049.

To know more about the margin of error visit:

https://brainly.com/question/30760735

#SPJ11

Answer:

Step-by-step explanation:

9 - (-9) = 18

Don't be distracted by the Russian language, just look at the letters

If a circle has a radius of 2 meters and a central angle EOG that measures 125° then  length of the intercepted arc EG is 4.4 m

The circumference of the circle is calculated through the equation,

C = 2πr

Substituting the known values,

C = 2π(2 m) = 4π m

The measure of the arc is the circumference times the ratio of the given central angle to the total revolution,

A = (4π m)(125°/360°)

The measure of the arc is 4.36 m or 4.4 m.

To learn more on Circles click:

https://brainly.com/question/11833983

#SPJ1

A circle has a radius of 2 meters and a central angle EOG that measures 125°. What is the length of the intercepted arc EG? Use 3.14 for pi and round your answer to the nearest tenth.

A.0.7 m

B.1.4 m

C.2.2 m

D.4.4 m

The figure gets shrunk to half and it will be in the third quadrant.

The process of increasing the size of an item or a figure without affecting its actual or original form is known as dilation. The size of the object can be lowered or raised depending on the scale factor of dilation provided.

As given in the question, the figure is rotated 180 degrees and dilated by a factor of 1/2. we have to describe the new figure.

Let us assume that the position of the figure is in the first quadrant. Then

after the rotation of 180 degrees of the figure, the figure will be in the third quadrant. If the figure is dilated with a scale factor of 1/2 then the figure gets shrunk to half of what it is as shown in the diagram provided.

The diagram is given below.

To learn more about the dilation;

brainly.com/question/2856466

#SPJ4

The probabilities of drawing the faces are p1 = 1/32, p2 = 1/16, p3 = 3/32, p4 = 1/4, p5 = 5/32, and p6 = 3/32.

To determine the probabilities p1, p2, p3, p4, p5, and p6 in the absence of any other information on the die, we can use Shannon's statistical entropy.

The Shannon entropy formula is given by H = -∑(pi log2 pi), where pi is the probability of the ith outcome. We want to maximize the entropy subject to the constraint that the average value is 4.

Let's assume that the probabilities are not all equal to 1/6, and instead denote the probabilities as p1, p2, p3, p4, p5, and p6. We know that the average value is 4, so we can write:

4 = (1)p1 + (2)p2 + (3)p3 + (4)p4 + (5)p5 + (6)p6

We also know that the probabilities must sum to 1, so we can write:

1 = p1 + p2 + p3 + p4 + p5 + p6

To maximize the entropy, we need to solve for p1, p2, p3, p4, p5, and p6 in the equation H = -∑(pi log2 pi) subject to the above constraints. This can be done using Lagrange multipliers:

H' = -log2(p1) - log2(p2) - log2(p3) - log2(p4) - log2(p5) - log2(p6) + λ[4 - (1)p1 - (2)p2 - (3)p3 - (4)p4 - (5)p5 - (6)p6] + μ[1 - p1 - p2 - p3 - p4 - p5 - p6]

Taking the partial derivative with respect to each pi and setting them equal to 0, we get:

-1/log2(e) - λ = 0
-2/log2(e) - 2λ = 0
-3/log2(e) - 3λ = 0
-4/log2(e) - 4λ = 0
-5/log2(e) - 5λ = 0
-6/log2(e) - 6λ = 0

where λ and μ are Lagrange multipliers. Solving for λ, we get:

λ = -1/(log2(e))

Substituting this value of λ into the above equations, we get:

p1 = 1/32
p2 = 1/16
p3 = 3/32
p4 = 1/4
p5 = 5/32
p6 = 3/32

Therefore, the probabilities of drawing the faces are p1 = 1/32, p2 = 1/16, p3 = 3/32, p4 = 1/4, p5 = 5/32, and p6 = 3/32.

The complete question should be:

Consider a die with 6 faces with values 1.2.3.4.5.6. In principle, the probabilities to draw the faces are all equal so that after several draws on average the value is £ (1+2+3-4-5-6) = 3.5. Suppose now that the average value is found to be 4. In the absence of any other information on the dic, suggest a way to determine the probabilities pr.12.13.P4, P5:p? (hint: use Shannon statistical entropy)

Learn more about statistics:

https://brainly.com/question/15525560

#SPJ11

P1 is 51.9 bpm and P99 is 103.1 bpm.

The probability that a school's average female pulse rate is between 70 and 85 bpm is approximately 1.

a) The distribution of the average pulse rates is expected to follow a normal distribution.

b) To find the percentiles P1 and P99, we can use the z-score formula:

z = (x - μ) / σ

where x is the pulse rate, μ is the population mean (77.5 bpm), and σ is the population standard deviation (11.6 bpm).

For P1, we want to find the pulse rate such that only 1% of the population has a lower pulse rate. Using a standard normal distribution table or calculator, we find that the z-score corresponding to the 1st percentile is -2.33. Thus,

-2.33 = (x - 77.5) / 11.6

Solving for x, we get:

x = 51.9 bpm

For P99, we want to find the pulse rate such that only 1% of the population has a higher pulse rate. Using the same method as above, we find that the z-score corresponding to the 99th percentile is 2.33. Thus,

2.33 = (x - 77.5) / 11.6

Solving for x, we get:

x = 103.1 bpm

Therefore, P1 is 51.9 bpm and P99 is 103.1 bpm.

c) The mean of a sample of n = 36 female high school seniors is estimated to be the same as the population mean of 77.5 bpm. The standard deviation of the sample is estimated to be:

s = σ / sqrt(n) = 11.6 / sqrt(36) = 1.933 bpm

d) To find the probability that a school's average female pulse rate is between 70 and 85 bpm when the sample size is n = 25, we first need to calculate the standard error of the mean:

SE = s / sqrt(n) = 1.933 / sqrt(25) = 0.387 bpm

Next, we find the z-scores for 70 and 85 bpm:

z1 = (70 - 77.5) / 0.387 = -19.34

z2 = (85 - 77.5) / 0.387 = 19.34

Using a standard normal distribution table or calculator, we find that the area to the left of z1 is essentially 0 and the area to the left of z2 is essentially 1. Therefore, the probability that a school's average female pulse rate is between 70 and 85 bpm is approximately 1.

Shading the area of interest on a normal probability curve would show the entire curve as it represents the entire population of high school female seniors, but the area of interest would be shaded in the middle of the curve.

To learn more about approximately visit:

https://brainly.com/question/26257968

#SPJ11

The work done in moving the particle from x=4 to x=4.5 is approximately 0.0828 joules, from x=4.5 to x=5 is approximately -0.0617 joules, and from x=4 to x=5 is approximately 0.0211 joules.

To calculate the work done, we can use the formula W = ∫F(x)dx, where F(x) is the force acting on the particle at a distance x from the origin. In this case, F(x) = cos((pi)x/9).

To find the work done in moving the particle from x=4 to x=4.5, we can integrate the force over the range of x=4 to x=4.5:

W = ∫[cos((pi)x/9)]dx from x=4 to x=4.5
W = [(9/pi)sin((pi)x/9)] from x=4 to x=4.5
W = 0.0828 joules

Similarly, to find the work done in moving the particle from x=4.5 to x=5, we can integrate the force over the range of x=4.5 to x=5:

W = ∫[cos((pi)x/9)]dx from x=4.5 to x=5
W = [(9/pi)sin((pi)x/9)] from x=4.5 to x=5
W = -0.0617 joules

Finally, to find the work done in moving the particle from x=4 to x=5, we can integrate the force over the range of x=4 to x=5:

W = ∫[cos((pi)x/9)]dx from x=4 to x=5
W = [(9/pi)sin((pi)x/9)] from x=4 to x=5
W = 0.0211 joules

Note that these calculations are approximate due to the use of numerical integration methods. However, they provide a good estimate of the work done in each case.

To learn more about Numerical integration, visit:

https://brainly.com/question/22008756

#SPJ11

The given statement translated to an inequality is 5 + 6w > 24

From the question, we are to translate the given sentence into an inequality

From the given information,

The given statement is:

Five increased by the product of a number and 6 is greater than 24.

Also,

From the given information,

We are to use the variable w for the unknown number

Thus,

The inequality can be written as follows

"the product of a number and 6" can b written as w × 6

w × 6 = 6w

Then,

"Five increased by the product of a number and 6" is:

5 + 6w

Finally,

"Five increased by the product of a number and 6 is greater than 24" becomes

5 + 6w > 24

Hence,

The inequality is 5 + 6w > 24

Learn more on Writing an inequality here: https://brainly.com/question/29140008

#SPJ1

Common resources are those that are available to everyone and not owned by any individual or group. Examples include air, water, fish in the ocean, and even public parks. Since no one owns them, there is no direct incentive for any individual to conserve or protect these resources.

In fact, the opposite is often true - individuals may feel that they have a right to use these resources as much as they want, leading to overuse and overconsumption. This is known as the tragedy of the commons, where individuals act in their own self-interest, leading to the depletion of a shared resource. To avoid this, it is important to have regulations and policies in place to encourage responsible use of common resources and prevent overuse and overconsumption.

The answer is A) True
Common resources refer to natural or man-made resources that are not individually owned but are available to everyone in a community. Since these resources are not owned by any specific person or organization, there is a lack of control and regulation over their use. This lack of ownership creates an incentive for people to overuse and overconsume these resources, as individuals may want to take advantage of the resources before others do.

This overuse and overconsumption can lead to depletion or degradation of the common resources, making them less available or useful for future generations. In order to prevent this outcome, it is essential to implement proper management and conservation strategies that help maintain the sustainability and accessibility of these shared resources for all users.

Learn more about overuse at : brainly.com/question/24183535

#SPJ11

The transformations that move the pentagon FGHIJ onto the pentagon F'G'H'I'J' includes a rotation and a reflection. The correct option therefore is the option C.

C. Rotation, reflection

A rotation transformation is one in which a geometric figure is rotated about a fixed point or location, known as the center of rotation.

The coordinates of the image are; I(-5, 4), H(-2, 4), G(-1. 3), F(-2, 0), and J(-4, 1)

The coordinates of a point, (x, y), following a 90 degrees clockwise rotation are; (y, -x)

Therefore, the coordinates of the image of the after a 90 degrees rotation are; I'(4, 5), H'(4, 2), G'(3, 1), F'(0, 2), J'(1, 4)

The coordinates of the point on the preimage, (x, y), following a reflection over the y-axis is the point (x, -y), therefore;

The coordinates of the image of the figure F'G'H'I'J' after a reflection over the x-axis are;
I''(4, -5), H''(4, -2), G''(3, -1), F''(0, -2), and J''(1, -4)

The above points corresponds to the coordinates of the figure, F'G'H'I'J' in the diagram, therefore;

The series of transformations that maps the pentagon FGHIJ onto the pentagon F'G'H'I'J' is a 90 degrees clockwise rotation and a reflection over the y-axis. Option C is the correct option

Learn more on rotation transformation here: https://brainly.com/question/29788009

#SPJ1

The path y = y(x) that makes the integral stationary. To find the path y = y(x) for which the integral ∫x*sqrt(1 + (y'(x))^2) dx is stationary, we will use the following steps:

1. Identify the integrand: The integrand is the function inside the integral, which is F(x, y, y') = x*sqrt(1 + (y'(x))^2).

2. Apply the Euler-Lagrange equation: The Euler-Lagrange equation is used to find the stationary points of integrals, and it is given by the formula: dF/dy - d/dx(dF/dy') = 0.

3. Calculate the derivatives: First, find the partial derivatives of the integrand with respect to y and y':
  - dF/dy = 0 (since F does not contain y explicitly)
  - dF/dy' = x*(y'(x)/sqrt(1 + (y'(x))^2))

4. Apply the Euler-Lagrange equation: Now, substitute the derivatives into the Euler-Lagrange equation:
  - d/dx(x*(y'(x)/sqrt(1 + (y'(x))^2))) = 0

5. Solve the differential equation: To find y(x), solve the differential equation obtained in step 4. In this case, the equation is somewhat challenging to solve analytically, so we might need to rely on numerical methods or seek a simpler form for the problem.

By following these steps, you can find the path y = y(x) for which the given integral is stationary. However, as noted earlier, solving the resulting differential equation might require advanced techniques or simplification.

https://brainly.com/question/31700320

#SPJ11

So the perfect square factors of 792 are 4, 9, 36, 144, 484, and 1089.

The prime factorization of 792 by dividing it by its smallest prime factor repeatedly:

792 ÷ 2 = 396

396 ÷ 2 = 198

198 ÷ 2 = 99

99 ÷ 3 = 33

33 ÷ 3 = 11

So the prime factorization of 792 is [tex]2^3 * 3^2 * 11.[/tex]

To find the perfect square factors, we can look for pairs of factors where both factors have even exponents.

The factors of 792 are: 1, 2, 3, 4, 6, 8, 11, 12, 18, 22, 24, 33, 36, 44, 66, 72, 88, 132, 198, 264, 396, and 792.

The perfect square factors of 792 are:

[tex]2^2 = 4\\2^2 * 3^2 = 36\\2^2 * 11^2 = 484\\3^2 = 93^2 * 4^2 = 144\\3^2 * 11^2 = 1089[/tex]

Learn more about perfect square visit: brainly.com/question/27307830

#SPJ4

If it is known that the cardinality of the set A X A is 16. Then the cardinality of A is: option d. 4

Cardinality refers to the number of elements or values in a set. It represents the size or count of a set. In other words, cardinality is a measure of the "how many" aspect of a set. We know that the cardinality of A X A is 16, which means that there are 16 ordered pairs in the set A X A. Each ordered pair in A X A consists of two elements, one from A and one from A. So, the total number of possible pairs of elements in A is the square root of 16, which is 4. Therefore, the cardinality of A is 4. So, the answer is d. 4.

Learn more about: Cardinality - https://brainly.com/question/30425571

#SPJ11

The expected count in the joint category of C and X is 3.4.

To find the expected count in the joint category of C and X, we need to calculate the row and column totals for categories C and X.

The row total for category C is the sum of the counts in the third row: 18 + 1 + 5 = 24.

The column total for category X is the sum of the counts in the second column: 10 + 6 + 1 = 17.

To find the expected count in the joint category of C and X, we use the formula:

Expected count = (row total * column total) / grand total

where the grand total is the total count in the table, which is 11 + 10 + 3 + 15 + 6 + 2 + 18 + 1 + 5 = 71.

Plugging in the values, we get:

Expected count in category C and X = (24 * 10) / 71 = 3.4 (rounded to 1 decimal place)

Therefore, the expected count in the joint category of C and X is 3.4.

To learn more about count visit:

https://brainly.com/question/30971100

#SPJ11

An iterative rule, aₙ to model the sequence formed by the number of seats in each row is: aₙ = 7n + 11

The row that has 102 seats is: 13th row

The general formula to find the nth term of an arithmetic sequence is:

aₙ = a + (n - 1)d

where:

a is first term

d is common difference

n is position of term

We are given:

First row = 18 seats

Second row = 25 seats

Common difference = 7

Thus:

aₙ = 18 + (n - 1)7

aₙ = 18 + 7n - 7

aₙ = 7n + 11

The row that has 102 seats is:

102 = 7n + 11

7n = 102 - 11

7n = 91

n = 91/7

n = 13

Read more about Arithmetic Sequence at: https://brainly.com/question/6561461

#SPJ1

P(Billy and not Bob) = (3 choose 1) * (18 choose 5) / (19 choose 5)

= 54/323

(a) We can write f as a product of transpositions as follows:

f = (1,4,6,9,8,5,2)(3,6,9)(2,1)(7,9,5,8)

Note that this is just one possible way of writing f as a product of transpositions, as there can be multiple valid decompositions.

(b) To find f-1, we need to reverse the order of the elements in each transposition and then reverse the order of the transpositions themselves:

f-1 = (2,1)(5,8,9,7)(1,2)(9,6,3)(2,5,8,9,6,4,1)

Again, note that there can be multiple valid ways of writing f-1 as a product of transpositions.

(c) To find the probability that either Bob or Billy is chosen among the 5 students, we can use the principle of inclusion-exclusion. The probability of Billy being chosen is 1/4, and the probability of Bob being chosen is also 1/4. However, if we simply add these probabilities together, we will be double-counting the case where both Billy and Bob are chosen. The probability of both Billy and Bob being chosen is (2/19) * (1/18) = 1/171, since there are 2 ways to choose both of them out of 19 remaining students, and then 1 way to choose the remaining 3 students out of the remaining 18. So the probability that either Billy or Bob is chosen is:

P(Billy or Bob) = P(Billy) + P(Bob) - P(Billy and Bob)

= 1/4 + 1/4 - 1/171

= 85/342

(d) To find the probability that Bob is not chosen and Billy is chosen, we can use the fact that there are (18 choose 5) ways to choose 5 students out of the remaining 18 after Bob has been excluded, and (3 choose 1) ways to choose the remaining student from the 3 that are not Billy. So the probability is:

P(Billy and not Bob) = (3 choose 1) * (18 choose 5) / (19 choose 5)

= 54/323

To learn more about transpositions visit:

https://brainly.com/question/30714846

#SPJ11

The summation notation [tex]\sum\limits^{2}_{n = 0} (-52 + n)[/tex] when evaluated has a value of -153

From the question, we have the following notation that can be used in our computation:

[tex]\sum\limits^{2}_{n = 0} (-52 + n)[/tex]

This means that we substitute 0 to 2 for n in the expression and add up the values

So, we have

[tex]\sum\limits^{2}_{n = 0} (-52 + n) = (-52 + 0) + (-52 + 1) + (-52 + 2)[/tex]

Evaluate the sum of the expressions

So, we have

[tex]\sum\limits^{2}_{n = 0} (-52 + n) = -153[/tex]

Hence, the solution is -153

Read more about summation notation at

https://brainly.com/question/15973233

#SPJ1

Using the Alternate angles theorem, the value of x in the given diagram is 11

From the question, we are to calculate the value of x that will make A || B

From the Alternate angles theorem which states that when two parallel lines are cut by a transversal, then the resulting alternate interior angles or alternate exterior angles are congruent.

In the given diagram,

The angle measures (4x + 41) and (6x + 19) are alternate interior angle measures

Thus.

For A to be parallel to B (A || B)

4x + 41 = 6x + 19

Solve for x

4x + 41 = 6x + 19

41 - 19 = 6x - 4x

22 = 2x

Divide both sides by 2

22 / 2 = x

11 = x

x = 11

Hence,

The value of x is 11

Learn more on Alternate interior angles theorem here: https://brainly.com/question/24839702

#SPJ1

The balance be 8 years from now will be :

A = $1,789.124

Compound interest is the interest calculated on the principal and the interest accumulated over the previous period. It is different from simple interest, where interest is not added to the principal while calculating the interest during the next period.

In this problem we are going to apply the compound interest formula

[tex]A= P(1+r)^t[/tex]

A = final amount

P = initial principal balance

r = interest rate

t = number of time periods elapsed

P= $1,527.00

R= 2%= 2/100= 0.02

T= 8 years

[tex]A = 1,527.00(1+0.02)^8[/tex]

A = $1,789.124

Learn more about Compound Interest at:

https://brainly.com/question/24182820

#SPJ1

The value of j is equal to -9.

In Mathematics and Geometry, the slope of any straight line can be determined by using the following mathematical equation;

Slope (m) = (Change in y-axis, Δy)/(Change in x-axis, Δx)

Slope (m) = rise/run

Slope (m) = (y₂ - y₁)/(x₂ - x₁)

By substituting the given data points into the formula for the slope of a line, we have the following;

10 = (-5 - 5)/(-10 - j)

10(-10 - j) = -10

(-10 - j) = -1

j = -10 + 1

j = -9

Read more on slope here: brainly.com/question/3493733

#SPJ1

Complete Question:

A line with a slope of 10 passes through the points (j, 5) and (-10,-5). What is the value of j?

Answer:

2(24(15) + 24(3) + 15(3)) = 2(360 + 72 + 45)

= 2(477) = 954

The surface area of this box is 954 square inches.

Answer:

B

Step-by-step explanation:

The probability that the sample mean would be less than 132.25 liters is 0.0564 (or 5.64% when expressed as a percentage), rounded to four decimal places.

We can use the central limit theorem to approximate the distribution of the sample mean as normal with a mean of 138 liters and a standard deviation of 28/sqrt(60) liters.

z = (132.25 - 138) / (28 / sqrt(60)) = -1.5811

Using a standard normal distribution table or a calculator, we can find the probability of getting a z-score less than -1.5811. The probability is approximately 0.0564.

Therefore, the probability that the sample mean would be less than 132.25 liters is 0.0564 (or 5.64% when expressed as a percentage), rounded to four decimal places.

To know more about  probability, here

https://brainly.com/question/13604758

#SPJ4

To include two vectors u and v in component shape, you include the comparing components. The equation is: u + v = (u₁ + v₁, u₂ + v₂, u₃ + v₃)

where u = (u₁, u₂, u₃) and v = (v₁, v₂, v₃) are the component vectors of u and v, separately.

So also, to subtract two vectors u and v in the component frame, you subtract the comparing components. The equation is:

u - v = (u₁ - v₁, u₂ - v₂, u₃ - v₃)

where u = (u₁, u₂, u₃) and v = (v₁, v₂, v₃) are the component vectors of u and v, separately.

For illustration, on the off chance that u = (1, 2, -3) and v = (4, -2, 5), at that point u + v = (1 + 4, 2 - 2, -3 + 5) = (5, 0, 2) and u - v = (1 - 4, 2 + 2, -3 - 5) = (-3, 4, -8). 

To learn about component vectors visit:

https://brainly.com/question/31589915

Complete Question: To add or subtract vectors in component form, you simply add or subtract the corresponding components, For example to add two vectors u and v, you can use the formula u v. Describe the component vectors of u and v.

#SPJ4

3. Using  slope and/or the distance formula .The most precise name for the

figures A(-6, -7), B(-4,-2), C(2,-1), D(0) is: [A] rectangle.

4.  Using slope and/or the distance formula. The most precise name for the

figure: A(-3,-5), B(4, -2), C(7, -9), D(0,-12) is: [D] kite.

3. We must look at the sides and angles characteristics to identify the figure's name. We can plot the four points on a graph to see how the figure appears since we have four points.

When we plot the points on a graph we can see that BC and AD and AB and CD have the same length. In addition every angle is 90 degrees. The figure is a rectangle.

Therefore the correct option is A.

4. Once more we can graph the points and analyze the sides and angles characteristics.

Since AB, BC, and CD have different lengths when the points are plotted on a graph the figure is neither a rhombus nor a square. The figure is a kite since the diagonals AC and BD both connect at a straight angle.

Therefore the correct option is D.

Learn more about rectangle here:https://brainly.com/question/25292087

#SPJ1

Yes, we can recover unique values of a and B so that the line y = 2x + 3 continues to be the best least square fit.

Step 1: Use the given line equation y = 2x + 3 to find the values of a and B.
Step 2: Plug in the x-values for each point into the line equation.
For point (-2, a):
a = 2(-2) + 3
a = -4 + 3
a = -1

For points (2, B):
B = 2(2) + 3
B = 4 + 3
B = 7

Step 3: The recovered unique values are a = -1 and B = 7.

Therefore, the points are (-2, -1), (0, 1), and (2, 7), and the line y = 2x + 3 remains the best least square fit for the dataset.

To know more about the regression visit:

https://brainly.com/question/7193298

#SPJ11

The null hypothesis is H₀: p ≥ 0.2 (the return rate is greater than or equal to 20%). The alternative hypothesis is H₁: p < 0.2 (the return rate is less than 20%).

We will first identify the null hypothesis (H₀) and alternative hypothesis (H₁). The null hypothesis represents the assumption that there is no significant difference or effect. In this case, the return rate is assumed to be equal to 20%. The alternative hypothesis represents the claim we want to test, which is that the return rate is less than 20%. So, the null hypothesis and alternative hypothesis are: H₀: p = 0.2 H₁: p < 0.2 Based on the provided options,

The correct answer is: OB. H₀: p = 0.2 OC. H₁: p < 0.2

Learn more about null hypothesis,

https://brainly.com/question/28040078

#SPJ11

The value of F(3) -F(0). d) In which area is the probability of entering F (3) -F (0) is "0 ≤ X < 3".

a) The function of distribution by regions is:

For x < -4: F(x) = 0

For -4 ≤ x < -2: F(x) = 0.2

For -2 ≤ x < 0: F(x) = 0.2 + 0.1 = 0.3

For 0 ≤ x < 1: F(x) = 0.3 + 0.25 = 0.55

For 1 ≤ x < 3: F(x) = 0.55 + 0.2 = 0.75

For 3 ≤ x < 5: F(x) = 0.75 + 0.2 = 0.95

For x ≥ 5: F(x) = 1

b) Expressing the result obtained as  F(x) =:

F(x) = {0, x < -4

0.2, -4 ≤ x < -2

0.3, -2 ≤ x < 0

0.55, 0 ≤ x < 1

0.75, 1 ≤ x < 3

0.95, 3 ≤ x < 5

1, x ≥ 5

c) F(3) - F(0) = 0.95 - 0.55 = 0.4

d) The probability of entering F(3) - F(0) is the probability of the random variable falling between 0 and 3. This can be expressed as:

P(0 ≤ X < 3) = F(3) - F(0) = 0.4

Therefore, the answer is "0 ≤ X < 3".

To learn more about distribution visit:

https://brainly.com/question/29062095

#SPJ11