Newton's 2nd law says that when a larger force is applied to an object of mass m, the object will experience a larger acceleration. At the same time, you've learned that all objects experience the same acceleration in a free fall, even if their weights (the forces of gravity acting on them) are different. That sounds like a contradiction: on one hand, from the Newton's 2nd law, a larger force means larger acceleration, on the other hand when applied to motion under gravity - a larger weight (force) means the same acceleration for all objects. How do you reconcile these statements? Why isn't it a contradiction? Does gravity violate the Newton's second law or is there another explanation. Be as thorough and clear in your explanation as possible.

The option that would result in the smallest margin of error in estimating the mean salt content, u, is 95% confidence, n = 50. The correct answer is Option D.

The margin of error is the amount by which a statistic is expected to differ from the true value of the population parameter. The interval estimate is calculated with the help of a margin of error. The margin of error and the interval estimate are inversely related to each other. If we want a small margin of error, we must increase the sample size.

The confidence level is the likelihood that a population parameter will fall within a specified range of values. The confidence level is determined by the sample size and margin of error. The sample size and margin of error are directly related to each other. When the sample size is smaller, the margin of error is larger. When the sample size is larger, the margin of error is smaller.

The margin of error is the highest at a confidence level of 50%. In general, as the confidence level increases, the margin of error decreases, and vice versa. As the sample size increases, the margin of error decreases. It follows that a 95% confidence level, n = 50 would yield the smallest margin of error in estimating the mean salt content, u. Hence, option D) 95% confidence, n = 50 would result in the smallest margin of error in estimating the mean salt content, u.

Learn more about margin of error here: https://brainly.com/question/29328438

#SPJ11

The speed of the particle is 8 m/s, the force of resistance is [tex]0.3(8)^2[/tex], or 19.2 N.

A particle of mass 1.2 kg is moving with a speed of 8 m/s in a straight line on a horizontal table. A resistance force is applied to the particle in the direction of the motion. The magnitude of the force is proportional to the square of the speed, such that [tex]F=0.3v^2[/tex]

The force of resistance is an opposing force that acts to reduce the speed of the particle. As the particle moves faster, the resistance force increases. The force is proportional to the square of the speed, meaning that if the speed doubles, the force is multiplied by four. The force is also in the same direction as the motion, meaning that it will reduce the speed of the particle.

The equation for the force of resistance is [tex]F=0.3v^2[/tex], where v is the speed of the particle. Therefore, if the speed of the particle is 8 m/s, the force of resistance is [tex]0.3(8)^2,[/tex] or 19.2 N. This means that the force of resistance acting on the particle is 19.2 N.

for such more question on resistance

https://brainly.com/question/28135236

#SPJ11

Answer:

The answer should be 20,365.714 but I am not sure

Step-by-step explanation:

0.4

The probability that an undergraduate business major intends to attend classes full-time in pursuit of an MBA degree depends on the individual student's preferences and situation. Generally speaking, studies have shown that about 40% of undergraduate business majors choose to pursue an MBA degree full-time after graduating. Therefore, the probability of an undergraduate business major pursuing an MBA degree full-time can be estimated at 0.4.

Learn more about probability.

brainly.com/question/30034780

#SPJ11

The probability that the proportion of persons with a retirement account in a random sample of size 555 differs from the population proportion by less than 5% is approximately 0.8327.

We need to make some assumptions about the population proportion of persons with a retirement account and the standard deviation of the sampling distribution of sample proportions. Let's assume that the population proportion is p = 0.5 (i.e., half of the population has a retirement account) and that the standard deviation of the sampling distribution is given by:

σ = sqrt((p*(1-p))/n)

where n is the sample size.

Substituting the values given in the question, we have:

σ = sqrt((0.5*(1-0.5))/555) = 0.0258

To find the probability that the sample proportion differs from the population proportion by less than 5%, we need to find the probability that the absolute difference between the sample proportion and the population proportion is less than 0.05. This can be written as:

P(|p_hat - p| < 0.05)

where p_hat is the sample proportion.

We can standardize this expression by subtracting the population proportion from both sides and dividing by the standard deviation:

P(|p_hat - p|/σ < 0.05/σ)

P(-0.97 < Z < 0.97)

where Z is a standard normal variable. We can find this probability using a standard normal table or a calculator:

P(-0.97 < Z < 0.97) = 0.8327

Rounding to four decimal places, we have:

P(|p_hat - p| < 0.05) = 0.8327

Therefore, the probability that the proportion of persons with a retirement account in a random sample of size 555 differs from the population proportion by less than 5% is approximately 0.8327.

Learn more about  probability

https://brainly.com/question/30034780

#SPJ4

Answer:

I attached your answer along with an explanation

Step-by-step explanation:

Please Like me follow me and Give me Crown for more help. :)

When researching a population where it is impossible or impractical to compile a list of the elements, the sampling technique that is appropriate to use is known as the cluster sampling technique

Cluster sampling is a type of probability sampling that is frequently used when the population is too large to be measured as a whole. The population is divided into smaller, more manageable clusters that are less difficult to study than the entire population.Therefore, cluster sampling is an excellent alternative when the target population cannot be measured because it is too large, too vast, or too hard to reach. In this technique, clusters are chosen by a random process or some other procedure.The final sampling method is achieved by selecting samples from within the clusters, which are frequently chosen using simple random sampling or some other appropriate method. When it comes to cluster sampling, it's important to remember that the clusters chosen must be heterogeneous internally but homogeneous externally.

Learn more about cluster sampling technique:https://brainly.com/question/11003935

#SPJ11

Answer:

Step-by-step explanation:

Circle centre: (4,7)

Radius: 3

Equation is:

  [tex](x-h)^2+(y-k)^2=r^2[/tex]   (where (h,k) is center, r is radius)

  [tex](x-4)^2+(y-7)^2=3^2[/tex]

  [tex](x-4)^2+(y-7)^2=9[/tex]     (This is the general standard form )

in expanded form,

  [tex](x^2-8x+16)+(y^2-14y+49)=9[/tex]

  [tex]x^2+y^2-8x-14y+56=0[/tex]

Note: Unless stated either form is an acceptable answer.

Alexis has 12 quarters and 8 dimes.

Let's use d to represent the number of dimes and q to represent the number of quarters. We know that Alexis has a total of 20 coins, so d + q = 20.

We also know that the value of these coins is $3.80. Since dimes are worth $0.10 and quarters are worth $0.25, we can write an equation for the total value in cents:

10d + 25q = 380

To make things easier, let's divide both sides of the equation by 5:

2d + 5q = 76

Now we can use the first equation to solve for d in terms of q:

d + q = 20

d = 20 - q

Substituting this into the second equation gives:

2(20 - q) + 5q = 76

Expanding the parentheses and simplifying, we get:

40 - 2q + 5q = 76

3q = 36

q = 12

Therefore, Alexis has 12 quarters. We can check this by plugging q back into the first equation to find that she has 8 dimes as well:

d + q = 20

d + 12 = 20

d = 8

The total value of 12 quarters and 8 dimes is:

12 quarters x $0.25 per quarter + 8 dimes x $0.10 per dime = $3.00 + $0.80 = $3.80


To know more about quarters and dimes refer here:

https://brainly.com/question/6500943#

#SPJ11

Based on the given information, the scout should choose Player A if they are looking for consistency.

What are range and standard deviation?

Range is the difference between the highest and lowest scores in the set.

Standard deviation measures how spread out the scores are from the mean.

To determine which player is more consistent, we need to look at the variability in their scores. One way to measure variability is to calculate the range and the standard deviation of each player's scores.

The smaller the range, the more consistent the player's scores are.

A smaller standard deviation indicates that the scores are closer together, which means the player is more consistent.

Using the data provided, we can calculate the range and standard deviation for both players:

Player A:

Range = 21 - 0 = 21

Standard deviation = 5.70

Player B:

Range = 48 - 3 = 45

Standard deviation = 10.89

From these calculations, we can see that Player A has a smaller range and a smaller standard deviation, which means that their scores are more consistent than Player B's. Therefore, the scout should choose Player A if they are looking for consistency.

To know more about the range and standard deviations visit:

brainly.com/question/14801621

#SPJ1

The mean absolute deviation (MAD) of the given set of data is 3.875.

To calculate the mean absolute deviation, we first need to find the mean of the data set by adding up all the numbers and dividing by the total number of values:

Mean = (12 + 10 + 12 + 6 + 8 + 4 + 2 + 12) / 8

Mean = 8

Next, we find the absolute deviation of each number from the mean. To do this, we subtract the mean from each number and take the absolute value:

|12 - 8| = 4

|10 - 8| = 2

|12 - 8| = 4

|6 - 8| = 2

|8 - 8| = 0

|4 - 8| = 4

|2 - 8| = 6

|12 - 8| = 4

Then, we find the mean of the absolute deviations:

Mean absolute deviation = (4 + 2 + 4 + 2 + 0 + 4 + 6 + 4) / 8

Mean absolute deviation = 26 / 8

Mean absolute deviation = 3.875

Therefore, the mean absolute deviation of the given set of data is 3.875.

Learn more about Mean absolute deviation:

https://brainly.com/question/447169
#SPJ4

Complete Question:

what is the mean absolute deviation of the following set of data 12 10 12 6 8 4 2 12.

Answer:

8;-2

Step-by-step explanation:

8 is the x axis and -2 is the y axis

Answer:

Step-by-step explanation:

Answer:  The area of the smaller circle is [tex]65.6cm^{2}[/tex].

Step-by-step explanation:

A = [tex]\pi r^{2}[/tex], r is the radius.

1. Find out the diameter of the small circle.

[tex]\frac{1}{3}(27)= 9[/tex]

2) Find out the radius, r.

[tex]radius = \frac{diameter}{2} =\frac{9}{2} =4.5[/tex]

3) We plugin r = 4.5 into the formula to solve the area of the smaller circle.

[tex]A=\pi r^{2}=\pi (4.5)^{2} =65.6cm^{2}[/tex]

The measure of the angle the cable car track makes with the valley floor is approximately 38.7 degrees.

The slope or inclination of a line or surface is sometimes referred to as the grade in mathematics. The ratio of the vertical change (rise) to the horizontal change (run) between any two locations on a line or surface is what is meant by this term. Usually, the grade is given as a percentage or a fraction. In engineering, building, and transportation, grades are frequently used to define the slope of roads, railroads, and other infrastructure. The grade, which refers to how steep the slope is when referring to a cable car, is a crucial element in determining the safety and effectiveness of the system.

To find the angle we use the trigonometric functions:

tan(θ) = grade = rise/run

Given that, the grade of the incline is 78%, then grade = 0.78.

θ = arctan(0.78) ≈ 38.7 degrees.

Hence, the measure of the angle the cable car track makes with the valley floor is approximately 38.7 degrees.

Learn more about grade here:

https://brainly.com/question/29150359

#SPJ1

Answer: 1287

Step-by-step explanation:

The bottom of the ladder is moving at a rate of 4/3 ft per second.

To solve the problem, we can use the Pythagorean Theorem:[tex]$x^2 + y^2 = 64$[/tex], where x is the distance from the wall to the bottom of the ladder and y is the length of the ladder. We differentiate this equation with respect to time t and use the chain rule to get [tex]$\frac{d}{dt} (x^2 + y^2) = \frac{d}{dt} 64$[/tex]

Simplifying, we get

[tex]$2x \frac{dx}{dt} + 2y \frac{dy}{dt} = 0$[/tex]

When the bottom of the ladder is 4 feet from the wall, we have x = 4 and y = 8, so we can substitute these values into our equation and solve for [tex]$\frac{dx}{dt}$[/tex]:

[tex]$2(4)\frac{dx}{dt} + 2(8)(-2) = 0$[/tex]

[tex]$\frac{dx}{dt} = \frac{16}{8} = \frac{4}{3}$[/tex]

Therefore, the bottom of the ladder is moving at a rate of [tex]$\frac{4}{3}$[/tex] ft/s.

Learn more about Time:

https://brainly.com/question/11733843
#SPJ4

The probability that a randomly selected adult weighs between 120 and 165 lbs is approximately 0.8186.

Since the weights of adults are normally distributed with a mean of 140 lbs and a standard deviation of 25 lbs, we can use the standard normal distribution to calculate the probability.

We first need to standardize the values using the formula: z = (x - μ) / σ, where x is the weight, μ is the mean, and σ is the standard deviation.

For x = 120 lbs, z = (120 - 140) / 25 = -0.8, and for x = 165 lbs, z = (165 - 140) / 25 = 1.0. We can then use a calculator to find the probability between -0.8 and 1.0, which is approximately 0.8186.

Thus, the chance of picking an adult at random who weighs between 120 and 165 lbs is roughly 0.8186.

To know more about normally distributed refer here:

https://brainly.com/question/29509087#

#SPJ11

Answer:

(2, 180)

Step-by-step explanation:

w(x)=-5x^2+20x+160

a=-5 b=20

x=-20/2x(-5)

x=2

w(2)=180

2, 180

The new length of the rectangle is approximately 2.29 units. We use the formula for the area of a rectangle to solve for the new length, given the new width.

If the width and length of a rectangle are 3 and 8, respectively, and the width is increased to 10.5, we can calculate the new length of the rectangle using the formula for the area of a rectangle, which is length multiplied by width.

The original area of the rectangle is 3 x 8 = 24 square units. If we increase the width to 10.5, the new area of the rectangle becomes: 10.5 x length = 24 Solving for the length, we get: length = 24/10.5 = 2.29 (rounded to two decimal places)

It's important to note that changing one dimension of a rectangle can affect the other dimension, especially if we want to maintain the same area.

Learn more about rectangle here:

https://brainly.com/question/27722891

#SPJ4

Answer:33

Step-by-step explanation:45-12=33

The expression 2(10+12) can be rewritten as 44 using the distributive property of multiplication over addition.

The distributive property is a fundamental property of arithmetic that relates multiplication to addition and subtraction. The distributive property of multiplication over addition states that for any numbers a, b, and c

a( b + c ) = ab + ac

Using this property, we can rewrite the expression 2(10+12) as

2( 10 + 12 ) = 2(10) + 2(12)

Here, we have distributed the factor of 2 over the terms inside the parentheses, using the distributive property. This gives us:

2(10+12) = 20 + 24

Simplifying further, we get

2(10+12) = 44

Learn more about distributive property here

brainly.com/question/6276874

#SPJ4

Coupling tetraalkylammonium and ethylene glycol ether side chain is an effective method to enable highly soluble anthraquinone-based ionic species for nonaqueous redox flow battery. The side chains of the tetraalkylammonium are modified with the ethylene glycol ether, which is a highly polar solvent, allowing for better solubility in nonaqueous electrolyte solutions. Additionally, the ethylene glycol ether has the ability to modify the stability of the ionic species, preventing aggregation and ensuring the longevity of the battery. This increases the redox capacity and enhances the performance of the flow battery.

The ethylene glycol ether-tetraalkylammonium coupling has been proven to be an effective method for improving the solubility and stability of anthraquinone-based ionic species. For example, it has been observed that the coupling of ethylene glycol ether to anthraquinone-based ionic species enhanced the current density of the battery by more than 3 times. Furthermore, the coupling process has also been found to improve the energy efficiency and storage capacity of the nonaqueous redox flow battery.

Overall, coupling tetraalkylammonium and ethylene glycol ether side chain is an effective method for enabling highly soluble anthraquinone-based ionic species for nonaqueous redox flow battery. This process has been proven to improve the performance of the battery, including current density, energy efficiency, and storage capacity.

for such more questions on solubility

https://brainly.com/question/23946616

#SPJ11

Answer:

Step-by-step explanation:

asdf

There are 5²⁵ possible ways to select 25 cans of soda from 5 types, while there are [5¹⁸] (25 choose 7) possible ways to select 25 cans with at least 7 Dr. Peppers, and only [3²²] (25 choose 3) possible ways to select 25 cans with only 3 Dr. Peppers available.

(a) Since there are five types of soda and we are selecting 25 cans, we can choose any type of soda for each can. Therefore, the number of ways to select 25 cans of soda is 5²⁵.

(b) If we must include at least seven Dr. Peppers, then we can choose the remaining 18 cans from any of the five types of soda (including Dr. Pepper). We can choose 7 Dr. Peppers in (25 choose 7) ways. Therefore, the number of ways to select 25 cans of soda with at least seven Dr. Peppers is (25 choose 7) [5¹⁸].

(c) If there are only three Dr. Peppers available, then we must choose all three Dr. Peppers and select the remaining 22 cans from the four types of soda (excluding Dr. Pepper). We can choose the remaining 22 cans in 4²² ways. Therefore, the number of ways to select 25 cans of soda with only three Dr. Peppers available is 3 [4²²].

Learn more about Combinatorics here: brainly.com/question/13261685

#SPJ4

Complete question:

From an unlimited selection of five types of soda, one of which is Dr. Pepper, you are putting 25 cans on a table.

(a) Determine the number of ways you can select 25 cans of soda.

(b) Determine the number of ways you can select 25 cans of soda if you must include at least seven Dr. Peppers.

(c) Determine the number of ways you can select 25 cans of soda if it turns out there are only three Dr. Peppers available.

Answer:

£164.50

Step-by-step explanation:

If the discount is 6%, then the discounted price is 94% of the original price.

95% of £175 = 0.94 × £175 = £164.50

The total number of hours is 30 hours as the sum of 7/8 and 3/8 comes out to be 30 hours.

1) We know that there is a total of 24 hours in a day.

therefore, 7/8 hours of Wednesday =

number of hours in a day = 24

number of hours every Wednesday = 7/8

= 7/8 x 24 hours

= 7 x 3 hours

= 21 hours

7/8 hours every Wednesday means 21 hours every Wednesday.  

2) We know that there are a total of 24 hours in a day;

therefore, 3/8 hours of Friday =

number of hours in a day = 24

number of hours every Friday = 3/8

= 3/8 x 24 hours

= 3 x 3 hours

= 9 hours

3/8 hours every Friday means 9 hours every Friday.

therefore, the total number of hours = 21 + 9 = 30

The total number of hours is 30 hours as the sum of 7/8 and 3/8 comes out to be 30 hours.

To learn more about sum, click here:

brainly.com/question/29034036

#SPJ4

The answer choice that is the most appropriate is B. A one-sample z-interval for estimating a population proportion

This is the most appropriate method because you are trying to estimate the proportion of all registered voters who have a favorable impression of Candidate A based on the sample data.

A one-sample z-interval is used when you want to estimate a population proportion using a sample proportion.

To calculate the one-sample z-interval for estimating a population proportion, you can use the following formula:

Confidence Interval = p ± Z * sqrt((p * (1 - p)) / n)

where:

Using this method, you will calculate a confidence interval that estimates the true proportion of registered voters who have a favorable impression of Candidate A, based on the sample data.

This is the most appropriate method because it focuses on estimating a single population proportion and incorporates the sample data and sample size into the calculation.

Read more about random samples here:

https://brainly.com/question/29444380

#SPJ1

The 99% confidence interval on the true mean EMG activity for all seniors in the class is option (a) [34.7296, 36.8704]

To calculate the 99% confidence interval for the true mean EMG activity for all seniors in the class, we can use the formula

CI = X ± Zα/2 (σ/√n)

where

X = sample mean = 35.8

Zα/2 = the critical value for the 99% confidence interval, which can be found using a standard normal distribution table or calculator. For a two-tailed test, α/2 = 0.005, so Zα/2 = 2.576.

σ = sample standard deviation = 2.5

n = sample size = 40

Substituting these values into the formula, we get

CI = 35.8 ± 2.576 (2.5/√40) = [34.7296, 36.8704].

Therefore, the correct option is (a) [34.7296, 36.8704]

Learn more about confidence interval here

brainly.com/question/24131141

#SPJ4

If you want each character to be approximately one inch in size, you would use a point size of 72 pts.

Point size is a unit of measurement used to determine the size of typefaces. It represents the height of the characters in a font. One point is equal to 1/72 of an inch, which means there are 72 points in one inch.

Therefore, if you want each character to be approximately one inch in size, you would need to use a font size of 72 points. This would ensure that the characters are roughly one inch tall, assuming that the font is designed to be proportional and not condensed or expanded.

Choosing a smaller point size, such as 1 pt or 24 pts, would result in characters that are much smaller than one inch. Choosing a larger point size, such as 36 pts, would result in characters that are larger than one inch.

Therefore the correct answer is option b.) 72 pts.

To learn more about point size, refer:-

https://brainly.com/question/14052507

#SPJ4