Nuclear reactions can be affected (slowed down/sped up) by: (HINT: do
they behave like conventional chemical reactions?)
Temperature
Pressure
Catalysts
All of the above
None of the above
1 point

Moving a gas to a smaller container and holding the container over a Bunsen burner are two modifications that might raise a gas's pressure.

Gas pressure rises as container volume decreases. As a gas's temperature rises inside a rigid container, pressure also rises. The temperature, volume, and particle count of an enclosed gas are all variables that determine its pressure.

We can modify the pressure in two ways. First, we can make the air denser by either decreasing the volume of the container or adding additional air molecules to it.

To know more about pressure visit:-

https://brainly.com/question/9099789

#SPJ1

The mass in gram of aluminum deposited (c) 0.27 g.

The balanced chemical equation for the electrolysis of aluminum chloride is:

2 AlCl3 → 2 Al + 3 Cl2

From this equation, we can see that 2 moles of Al will be produced for every 2 moles of AlCl3 consumed. The molar mass of Al is 27 g/mol, so the mass of Al produced can be calculated using the following formula:

mass of Al = (current × time × molar mass of Al) / (3 × Faraday's constant)

where the current is in amperes, time is in seconds, Faraday's constant is in coulombs per mole of electrons (F = 96500 C), and the factor of 3 in the denominator comes from the stoichiometry of the reaction.

Plugging in the values given in the problem, we get:

mass of Al = (10 A × 96.5 s × 27 g/mol) / (3 × 96500 C/mol) = 0.27 g

Therefore, the answer is (c) 0.27 g.

learn more about electrolysis here

https://brainly.com/question/12994141

#SPJ1

A string is a data type used to represent sequence of characters, such as "12345" which is a sequence of numbers.

String is a data type used in programming languages that consists of a sequence of characters, such as letters, numbers, and symbols, typically used to store and represent text-based information. It is a data type that is used to represent text-based data, such as words and sentences. Strings are essential in programming, as they are used in many different ways, such as storing user input, manipulating text, and representing data in a readable format. Strings are also used to store a variety of data, such as text, numbers, date and time, and other special characters. In many programming languages, strings are immutable, meaning that they cannot be changed once they have been created.

To learn more about string

https://brainly.com/question/14675668

#SPJ9

Al(NO3)3 sample of 6.3 g has an oxygen mass of 7.20 g.

Simply base your solution on the chemical formula provided because a chemical reaction is not provided.

Molar mass of Al2(SO4)3 = 342.15 g/mol

7.20 g Al2 (SO4)3 (1 mol/342.15g) (3mol O/2 mol Al) (1 mol O2/1/2 mol O2) (32g O2/1mol O2) = 4.04 g O2

To learn more about mass of oxygen, refre to:

https://brainly.com/question/12902286

Therefore, the concentration of casein in the milk solution is approximately 1.121 × 10⁻⁵ mol/L.

Concentration is a measure of the amount of a substance present in a given volume or mass of a solution or mixture. It is usually expressed in units of mass per unit volume (e.g. g/L), moles per unit volume (e.g. mol/L), or percentage by mass or volume (e.g. % w/v or % v/v). Concentration is an important concept in chemistry, biochemistry, and many other fields. It allows us to quantify the amount of a substance present in a solution or mixture, and to compare the concentrations of different substances. It is also used to determine the stoichiometry of chemical reactions, to calculate reaction rates, and to monitor the progress of chemical reactions. In general, the concentration of a substance depends on the amount of the substance and the volume or mass of the solution or mixture. Thus, concentration can be changed by adding or removing a substance, or by changing the volume or mass of the solution or mixture.

Here,

First, let's calculate how much casein is in the 1 g of milk powder:

80% of 0.349 g = 0.2792 g of casein

Next, let's calculate the concentration of casein in the milk solution. We'll assume that the milk solution is made by dissolving the 1 g of milk powder in water to make a total volume of 100 mL (or 0.1 L) of solution:

Concentration of casein = mass of casein / volume of solution

Mass of casein = 0.2792 g

Volume of solution = 0.1 L

Concentration of casein = 2.792 g/L or 2.792 mg/mL

Finally, let's calculate the concentration of hydrolyzed casein, which we'll assume is completely broken down into its constituent amino acids. The molecular weight of casein is 24,891 g/mol, so the molecular weight of each amino acid is approximately 110 g/mol (since casein is about 80% amino acids). Therefore, we can estimate that the molecular weight of hydrolyzed casein is about 110 g/mol:

Concentration of hydrolyzed casein = concentration of casein * (molecular weight of casein / molecular weight of hydrolyzed casein)

Concentration of casein = 2.792 mg/mL

Molecular weight of casein = 24,891 g/mol

To calculate the concentration of hydrolyzed casein, we need more information about the degree of hydrolysis of the casein. If we know the percentage of the casein that has been hydrolyzed, we can calculate the concentration of hydrolyzed casein using a similar approach as above.

To know more about concentration,

https://brainly.com/question/30639206

#SPJ9

The equilibrium constant (Kc) for the reaction is 11.8.

The equilibrium constant (Kc) for the reaction can be expressed as follows:

Kc = ([CS2][H2]^4)/([CH4][H2S]^2)

We are given the initial concentrations of CH4 and H2S, as well as the equilibrium concentration of H2. We need to calculate the equilibrium concentrations of CS2, CH4, and H2S before we can calculate Kc.

Let x be the change in concentration of CH4 and H2S, and y be the change in concentration of CS2 and H2 at equilibrium. Then the equilibrium concentrations can be expressed as follows:

[CH4]eq = 0.453 - x

[H2S]eq = 0.827 - x

[CS2]eq = y

[H2]eq = 0.626 + 4x - y

The stoichiometry of the reaction tells us that y = 2x, since 1 mole of CH4 reacts with 2 moles of H2S to produce 1 mole of CS2 and 4 moles of H2. Substituting this into the equations above, we get:

[CH4]eq = 0.453 - x

[H2S]eq = 0.827 - x

[CS2]eq = 2x

[H2]eq = 0.626 + 2x

The equilibrium constant can now be calculated as follows:

Kc = ([CS2][H2]^4)/([CH4][H2S]^2)

Kc = (2x * (0.626 + 2x)^4) / ((0.453 - x)*(0.827 - x)^2)

Substituting the equilibrium concentrations into this equation and solving for x gives:

x = 0.198 M

Substituting this value back into the equilibrium concentrations equations gives:

[CH4]eq = 0.255 M

[H2S]eq = 0.629 M

[CS2]eq = 0.396 M

[H2]eq = 1.115 M

Finally, substituting these equilibrium concentrations into the equilibrium constant equation gives:

Kc = ([CS2][H2]^4)/([CH4][H2S]^2)

Kc = (0.396 * (1.115)^4) / ((0.255)*(0.629)^2)

Kc = 11.8

Learn more about equilibrium constant (Kc) at: https://brainly.com/question/30906972

#SPJ1

When each molecule of Na₂SO4•10H₂O is heated, it loses 10 water molecules.

When Na₂SO₄•10H₂O is heated, it loses water molecules to become anhydrous Na₂SO₄.

The number of water molecules lost can be calculated as follows:

Each molecule of Na₂SO₄•10H₂O contains 10 water molecules, so when it is heated, it loses all of these water molecules.

Therefore, when each molecule of Na₂SO4•10H₂O is heated, it loses 10 water molecules.

Learn more about water molecules here: https://brainly.com/question/30945925

#SPJ1

The value of the equilibrium constant, Ksp, for silver carbonate (Ag2CO3) is 2.07 x 10^-11.

The solubility product constant (Ksp) is a measure of the solubility of a sparingly soluble salt. For silver carbonate (Ag2CO3), the equilibrium expression for its dissolution in water is:

Ag2CO3(s) ⇌ 2Ag+(aq) + CO3^2-(aq)

The corresponding equilibrium constant expression for the reaction is:

Ksp = [Ag+]^2[CO3^2-]

where [Ag+] and [CO3^2-] are the molar concentrations of silver ions and carbonate ions in the solution, respectively.

We are given the molar solubility of Ag2CO3, which is 1.28 x 10^-4 M. This means that when Ag2CO3 dissolves in water, it dissociates to form 2Ag+ ions and 1 CO3^2- ion. Therefore, we can assume that the initial molar concentration of Ag+ and CO3^2- in the solution are also 1.28 x 10^-4 M.

Substituting these values into the Ksp expression, we get:

Ksp = [Ag+]^2[CO3^2-] = (1.28 x 10^-4 M)^2(1.28 x 10^-4 M) = 2.07 x 10^-11

To know more about equilibrium constant visit:-

brainly.com/question/10038290

#SPJ1

The volume of 0.1 M ammonia obtained from the reaction is 0.504 L.

The balanced chemical equation for the reaction between ammonium chloride and sodium hydroxide is:

NH4Cl + NaOH → NaCl + H2O + NH3

From the equation, we can see that 1 mole of ammonium chloride produces 1 mole of ammonia.

First, we need to calculate the number of moles of ammonium chloride present in 2.7 g of NH4Cl:

Molar mass of NH4Cl = 14.01 + 1.01 x 4 + 35.45 = 53.49 g/mol

Number of moles of NH4Cl = mass / molar mass = 2.7 g / 53.49 g/mol = 0.0504 mol

Since the reaction goes to completion and we have an excess of sodium hydroxide, all of the ammonia produced will be absorbed by the 0.1 M solution of the absorber.

The concentration of the ammonia solution can be calculated as follows:

0.1 M = moles of NH3 / volume of NH3 solution (in liters)

moles of NH3 = 0.0504 mol (from above)

Volume of NH3 solution = moles of NH3 / 0.1 M = 0.0504 mol / 0.1 M = 0.504 L

Therefore, the volume of 0.1 M ammonia obtained from the reaction is 0.504 L.

Learn more about mole here : brainly.com/question/15356425

#SPJ1

Answer:

C12H22O11 + 12O2 --> 12CO2 + 11H2O

Explanation:

C12H22O11 + 12O2 --> 12CO2 + 11H2O

C = 12

H = 22

O = 11 + 24 = 35

The balanced chemical equation is: C12H22O11 + 12 O2 → 12 CO2 + 11 H2O

C12H22O11 is the chemical formula for sucrose, a disaccharide composed of glucose and fructose monomers linked by a glycosidic bond. Sucrose is commonly known as table sugar and is a common sweetener in food and beverages. It is extracted from sugar cane or sugar beet and is widely used in the food industry.

Yes, it is necessary to balance a chemical equation to ensure that the law of conservation of mass is obeyed. This law states that matter cannot be created or destroyed in a chemical reaction but can only be rearranged into different combinations.

To learn more about mass, visit here:

https://brainly.com/question/19694949

#SPJ1

The molarity of the solution containing 10.25g of BaCO3 dissolved in 250 mL of solution is 0.2984 M.

Divide the moles of solute by the litres of solution to obtain the molarity. A 0.25 mol/L NaOH solution, for instance, has 0.25 mol of sodium hydroxide per litre of the solution.

First, we need to calculate the number of moles of BaCO3 present in 10.25g:

Molar mass of BaCO3 = 137.33 g/mol (1 Ba atom x 137.33 g/mol + 1 C atom x 12.01 g/mol + 3 O atoms x 16.00 g/mol)

Number of moles of BaCO3 = mass / molar mass = 10.25 g / 137.33 g/mol = 0.0746 mol

Next, we need to convert the volume of the solution from milliliters to liters:

250 mL = 250/1000 L = 0.25 L

Now we can calculate the molarity (M) of the solution:

Molarity = moles of solute / volume of solution

Molarity = 0.0746 mol / 0.25 L

Molarity = 0.2984 M

To know more about molarity visit:-

brainly.com/question/8732513

#SPJ1

A 30% NaOH solution has a normality of 0.0833 N.

We must know the molarity of the solution and the quantity of equivalents of NaOH in each mole in order to establish the normalcy of a 30% NaOH solution.

NaOH's molarity is calculated as follows: (percent concentration / 100) * (density / molar mass)

NaOH's molarity is calculated as follows: (30/100)*(1.11 g/mL)/(40.00 g/mol)

NaOH has a molarity of 0.0833 mol/L.

The quantity of hydroxide ions (OH-) generated by the substance in solution is equal to the number of equivalents of NaOH per mole. There are one equivalents of NaOH because it dissociates in water to create one hydroxide ion per molecule.

To learn more about normality of a solution visit:

brainly.com/question/29120657

#SPJ1

The reaction's percent yield is 84.8%.

To compute the percentage yield of this process, we must first calculate the theoretical yield and then compare it to the actual yield.

According to the balanced equation, 1 mole of Cr2O3 and 2 moles of Al react to form 2 moles of Cr. The chemical molar masses can convert the given masses of Cr2O3 and Al into moles.

44.1 g Cr2O3 x (1 mol Cr2O3 / 151.99 g) = 0.290 mol Cr2O3

35.0 g Al x (1 mol Al / 26.98 g) = 1.297 mol Al

1 mole of Cr2O3 reacts to form 2 moles of Cr, according to the balanced equation. As a result, the theoretical yield of Cr is:

0.290 mol Cr2O3 x (2 mol Cr / 1 mol Cr2O3) x (52.00 g Cr / 1 mol Cr) = 30.2 g Cr

Now we can calculate the percent yield using the formula:

percent yield = (actual yield / theoretical yield) x 100%

The actual yield of Cr is given as 25.6 g, so:

percent yield = (25.6 g / 30.2 g) x 100% = 84.8%

As a result, the reaction's percent yield is 84.8%. This means the reaction did not run completely efficiently, and some reactants were not converted to products.

Learn more about percent yield :

https://brainly.com/question/14714924

Taking into account the definition of wavelength, frecuency and propagation speed, the wavelength of a yellow light with a frequency of 5.2×10¹⁴ Hz is 5.77×10⁻⁷ m.

The length of a wave is the spatial period of the wave, that is, the distance at which the waveform repeats itself. Two consecutive points that have the same phase are normally considered: two maximums, two minimums, two zero crossings (in the same direction).

This is, wavelength is the minimum distance between two successive points on the wave that are in the same state of vibration. It is expressed in units of length (m).

Frequency is a measure of the number (amount of cycles) of waves generated in a unit of time. Its unit is s⁻¹ or hertz (Hz).

The propagation speed is the speed with which the wave propagates in the medium, that is, it is the magnitude that measures the speed at which the wave disturbance propagates along its displacement.

The propagation speed relate the wavelength (λ) and the frequency (f) inversely proportional using the following equation:

v = f×λ

All electromagnetic waves propagate in a vacuum at a constant speed of 3×10⁸ m/s, the speed of light.

In this case, you know:

Replacing in the definition of propagation speed:

3×10⁸ m/s= 5.2×10¹⁴ Hz× λ

Solving:

λ= 3×10⁸ m/s ÷ 5.2×10¹⁴ Hz

λ= 5.77×10⁻⁷ m

In summary, the wavelength of the yellow light is 5.77×10⁻⁷ m.

Learn more about wavelength, frecuency and propagation speed:

brainly.com/question/2232652

#SPJ1

Answer:

1- volume of balloon = 0.46949 L
2- volume = 0.71399 L
3- V = 0.28510 L = 285.102 mL
4- V = 1.80537 L

Explanation:
It's all about Charles' law

Charles' law: The volume of an ideal gas is directly proportional to the absolute temperature AT CONSTANT PRESSURE.

then, we conclude that:

[tex]\frac{V_{1} }{T_{1} } = \frac{V_{2} }{T_{2} }[/tex]

in which V1 : initial volume in Liters, T1: initial temperature in Kelvin, V2: final volume in Liters, T2: final temperature in Kelvin.

*Temperature in Kelvin = Temperature in Celsius + 273

in Q1:

[tex]\frac{0.5}{22+273} =\frac{V_{2} }{4+273}[/tex]

[tex]V_{2} = \frac{0.5(4+273)}{22+273} = 0.46949 L[/tex]

in Q2:

[tex]\frac{0.4}{293} = \frac{V_{2}}{523}[/tex]

[tex]V_{2} = \frac{523 * 0.4 }{293} = 0.71399 L[/tex]

in Q3:

[tex]\frac{0.25}{292} = \frac{V_{2}}{333}[/tex]

[tex]V_{2} = \frac{333*0.25}{292} = 0.285102 L = 285.102mL[/tex]

in Q4:

[tex]\frac{2}{298} = \frac{V_2}{269}[/tex]

[tex]V_2 = \frac{2*269}{298} = 1.80537 L[/tex]

This means that the molality of solutes in the blood of fish in the Antarctic Ocean must be at least -1.08 m to prevent it from freezing at -2°C.

Concentration refers to the amount of a solute (the substance being dissolved) that is present in a given amount of a solvent (the substance doing the dissolving). It is typically expressed as the amount of solute per unit volume or mass of the solution. There are several different ways to express concentration, including mass concentration, molar concentration, molality, and mole fraction. Concentration is an important concept in chemistry and is used to describe the strength of solutions, as well as to calculate reaction rates, equilibrium constants, and other properties of chemical systems.

Here,

(a) To prevent the blood of fish in the Antarctic Ocean from freezing, the concentration of solutes (such as salts or proteins) in their blood must be high enough to lower the freezing point of water below -2°C. The molality (moles of solute per kilogram of solvent) of the blood can be calculated using the formula:

ΔTf = Kf * m

where ΔTf is the change in freezing point, Kf is the freezing point depression constant for water (1.86°C/m), and m is the molality of the solution.

ΔTf = -2°C - 0°C = -2°C

Kf = 1.86°C/m

Therefore, m = ΔTf / Kf = -2°C / 1.86°C/m = -1.08 m

This is a very high concentration, but it is a reasonable physiological concentration for these fish as they have adapted to living in such extreme environments.

(b) The special type of protein in the blood of these fish that prevents it from freezing is called an antifreeze protein (AFP). The mechanism by which AFPs prevent ice formation is known as the adsorption inhibition mechanism. AFPs bind to the surface of ice crystals, preventing them from growing and aggregating, and thus inhibiting ice formation. This allows the fish to maintain fluidity of their blood and bodily fluids in subzero temperatures. The exact mechanism of how AFPs adsorb to the ice surface is still being studied, but it is thought to involve specific amino acid residues and hydrogen bonding interactions between the protein and the ice surface.

To know more about concentration,

https://brainly.com/question/29276511

#SPJ9

The molarity of the solution is 0.0833 M.

The molarity (M) of a solution is defined as the number of moles of solute dissolved per liter of solution.

It is the measure of the concentration of any solute per unit volume of the solution.

In this case, we are given that there are 0.25 moles of NaOH dissolved in 3.0 liters of solution.

To find the molarity, we divide the number of moles by the volume in liters:

Molarity = moles of solute / volume of solution

Molarity = 0.25 moles / 3.0 L

Molarity = 0.0833 M

Therefore, the molarity is 0.0833 M.

Learn more about molarity here:https://brainly.com/question/9273453

#SPJ1

We would require 7.07 g of iron to generate 8 g of copper.

It is a common metal in the Earth's crust that is thick, glossy, and silver-gray in color. By mass, iron is the fourth most prevalent metal in the crust of the Earth and the most prevalent element overall.

The reaction between copper(II) sulfate and iron is a redox process in which copper(II) ions are reduced to copper metal and iron is oxidized to iron(II) sulfate. The reaction's chemically balanced equation is as follows:

Fe(s) + CuSO4(aq) → Cu(s) + FeSO4(aq)

The balanced equation reveals that the molar ratio of copper to iron is 1:1. Therefore, 1 mole of copper is created for every mole of iron utilized.

We must first convert the mass of copper to moles, and then apply the mole ratio to determine how many moles of iron are required to generate 8 g of copper.

Copper has a molar mass of 63.55 g/mol. As a result, the amount of copper produced is:

8 g / 63.55 g/mol = 0.126 moles

Since iron and copper have a mole ratio of 1:1, we require as many moles of iron as we do with copper:

0.126 moles of Cu = 0.126 moles of Fe

Iron has a molar mass of 55.85 g/mol. The required amount of iron is thus:

0.126 moles x 55.85 g/mol = 7.07 g of Fe

Hence, we would require 7.07 g of iron to generate 8 g of copper.

To know more about iron, visit:

https://brainly.com/question/18500540

#SPJ1

The molar solubility of BaF2 in a solution containing 0.33 M KF(aq) is 4.4 × [tex]10^{-4}[/tex] M

What is Solubility?

Solubility is a measure of the maximum amount of a substance that can dissolve in a given solvent at a specific temperature and pressure. In other words, it is the concentration of a solute in a saturated solution at a particular temperature and pressure.

To solve this problem, we need to write the balanced chemical equation for the dissolution of BaF2:

BaF2(s) ⇌ Ba2+(aq) + 2F-(aq)

And the solubility product expression (Ksp) for this reaction is:

Ksp = [Ba2+][F-]^2 = 1.8 ×[tex]10{-7}[/tex]

We know that KF is a soluble salt, and in aqueous solution, it completely dissociates into K+ and F- ions:

KF(aq) → K+(aq) + F-(aq)

When KF is added to a solution containing BaF2, the F- ions will react with the Ba2+ ions from the BaF2 to form more BaF2. This process is described by the following equation:

BaF2(s) + KF(aq) ⇌ BaF2·KF(aq)

The equilibrium constant for this reaction can be written as:

K = [BaF2·KF(aq)]/[BaF2][KF(aq)]

Now, let's define the molar solubility of BaF2 as "x". Then, we can write the concentration of Ba2+ and F- ions in terms of "x":

[Ba2+] = x

[F-] = 2x

[K+] = 0.33 M

At equilibrium, the concentrations of Ba2+, F-, and K+ ions will satisfy the equation:

K = [Ba2+][F-]^2/[BaF2][KF(aq)]

Substituting the values we have into this equation:

1.4 × [tex]10^{-4}[/tex] = x × [tex]2x^{2}[/tex] / [(1 - x)(0.33)]

Solving for "x", we get:

x = 4.4 × [tex]10^{-4}[/tex] M

Learn more about Solubility from the given link

https://brainly.com/question/23946616

#SPJ1

A gas is considered to be inactive if, under a specific set of circumstances, no molecular interactions occur.

A gas is considered to be inert if it does not easily experience chemical interactions with other chemicals and does not easily produce chemical compounds as a result. The noble gases, formerly known as the neutral gases, frequently do not combine with a wide variety of substances. Inert gases are typically used to prevent unintended chemical reactions from deteriorating a sample.

The oxygen and wetness in the air cause these unwanted chemical reactions, which are frequently oxidation and hydrolysis reactions. Because several of the noble gases can be made to respond under specific circumstances, the word "inert gas" is context-dependent. The most widely used inert gas is purified argon gas because of its large natural abundance (78.3% N2, 1% Ar in air) and cheap relative expense.

Learn more about inert gas

https://brainly.com/question/3637358

#SPJ1

Answer:

Assuming that the addition of 5.00 mL of 0.011 M HCl to 50.00 mL of pure water does not significantly affect the volume of the solution:

Calculate the number of moles of HCl added:

moles HCl = concentration x volume = 0.011 mol/L x 0.00500 L = 5.50 x 10^-5 mol

Calculate the total volume of the solution:

total volume = 50.00 mL + 5.00 mL = 55.00 mL = 0.055 L

Calculate the concentration of H+ ions in the solution:

[H+] = moles HCl / total volume = 5.50 x 10^-5 mol / 0.055 L = 1.00 x 10^-3 M

Calculate the pH of the solution:

pH = -log[H+] = -log(1.00 x 10^-3) = 3.00

Therefore, the pH of the solution is 3.00.

Explanation:

That leaves us with options A and C. We know that the red liquid forms the top layer, and if it is less dense than both the green and blue liquids, then option A is correct.

What is Density?

Density is a physical property that describes the amount of mass per unit volume of a substance. It is a measure of how much matter is packed into a given amount of space.

Where mass is the amount of matter in an object and volume is the amount of space that the object occupies.

Based on the information given in the question, we can conclude that the liquids have different densities, with the most dense liquid forming the bottom layer and the least dense liquid forming the top layer. Therefore, option D is ruled out.

Since the green liquid forms the bottom layer, it must be more dense than both the blue and red liquids. Therefore, option B is ruled out.

Learn more about Density from given link

https://brainly.com/question/26364788

#SPJ1

a. The gas-phase enthalpy change for the reaction, ΔH is 272 kJ/mol.

b. The reaction is endothermic

c. The information provided makes it impossible to tell if the reaction is spontaneous in the given direction or not.

To determine the gas-phase enthalpy change using bond dissociation enthalpies, we use the formula below:

Using the OWL Table Reference, we can obtain the following bond dissociation energies:

C-H bond dissociation energy: 413 kJ/mol

C-Br bond dissociation energy: 276 kJ/mol

O-H bond dissociation energy: 463 kJ/mol

Breaking the bonds in the reactants requires:

3 C-H bond energies: 3 x 413 kJ/mol = 1239 kJ/mol

1 C-Br bond energy: 276 kJ/mol

1 O-H bond energy: 463 kJ/mol

Forming the bonds in the products releases:

3 C-O bond energies: 3 x 360 kJ/mol = 1080 kJ/mol

1 H-Br bond energy: 366 kJ/mol

The gas-phase enthalpy change for the reaction is:

ΔH = (bond energies of reactants broken) - (bond energies of products formed)

ΔH = (1239 kJ/mol + 276 kJ/mol + 463 kJ/mol) - (1080 kJ/mol + 366 kJ/mol)

ΔH = 272 kJ/mol

b. The reaction requires energy to proceed and is, therefore, endothermic.

c. To determine whether the reaction is likely to proceed spontaneously in the direction written, the Gibbs free energy change (ΔG) of the reaction must be known.

The Gibbs free energy change is related to the enthalpy change (ΔH) and the entropy change (ΔS) by the equation:

ΔG = ΔH - TΔS

The data provided is not enough to determine if the reaction is spontaneous in the given direction or not.

Learn more about exothermic and endothermic reactions at: brainly.com/question/14711757

#SPJ1

Answer:

As a general rule of thumb, compounds that involve a metal binding with either a non-metal or a semi-metal will display ionic bonding. Compounds that are composed of only non-metals or semi-metals with non-metals will display covalent bonding and will be classified as molecular compounds.

The correct option is d;  A is false but R is true , Examples include wastewater (sometimes called effluent) released by a manufacturing, an oil refinery, or a wastewater treatment facility, as well as pollution from leaky septic systems, chemical and oil spills, and unlawful dumping.

Most sewage is liquid waste. It is the waste water created by human activity from places like homes, businesses, hospitals, and workplaces that includes both liquid and solid wastes. Water, which contains dissolved and suspended pollutants, makes up the majority of it. Wastewater arises from typical life processes: bathing, toilet flushing, laundry, dishwashing, etc.

It emanates from home and domestic sources. Commercial wastewater originates from non-domestic sources such beauty parlors, taxidermie, furniture restoration, music instrument washing facilities, and car body shops.

Learn more about wastewater treatment

https://brainly.com/question/29751879

#SPJ1

Full Question ;

The following question consists of two statements- Assertion (A) and Reason (R), An the question by selecting the suitable option given below. Assertion (A): Sewage is the dirty water that is generated by human activities.

Reason (R): Biogas is used to generate electricity.

(a) both A and R are true, and R is the correct explanation of A

(b) both A and R are true, and R is not the correct explanation of A

(c) A is true but R is false.

(D) A is false but R is true

Answer:

6 mol CO2

Explanation:

According to the equation, 6 moles of O2 will produce 6 moles of CO2, so the ratio is 1:1

therefore 6 moles of O2 will produce 6 moles of CO2

2 Na2O (s) + 2 Cl2 (g)  4 NaCl (s) + O2 is the general equation for the reaction that generates NaCl and O2 from Na2O and Cl2. (g).

The interaction of sodium with chlorine (Cl) to form sodium chloride is an illustration of a synthesis reaction. (NaCl). The chemical formula for this reaction is 2Na + Cl2 2NaCl.

Sodium is oxidised (its oxidation number grows from 0 in Na to +1 in NaCl) and chlorine is reduced (its oxidation number reduces from 0 in Cl2 to 1 in NaCl) sodium chloride is created when these two elements react.

To know more about reaction visit:-

https://brainly.com/question/28984750

#SPJ1

Answer:

Step 1/2

First, we need to write the balanced chemical equation for the reaction: H2O(l) + CO2(g) → H2CO3(aq)

Step 2/2

Next, we can write the expression for the equilibrium constant, Kc, which is defined as the product of the concentrations of the products raised to their stoichiometric coefficients divided by the product of the concentrations of the reactants raised to their stoichiometric coefficients: Kc = [H2CO3] / ([H2O][CO2]) Therefore, the correct answer is 3. Kc = [H2CO3]^2/[H2O][CO2].

if it helped you please mark me a brainliest :))

The equilibrium constant expression for the reaction: H2O + CO2 (g) → H2CO3 (aq) is represented as [H2CO3] / ([H2O][CO2]). The concentration of water is usually omitted as it is a pure liquid.

The equilibrium constant expression for the given reaction: H2O + CO2 (g) → H2CO3 (aq) is often represented as the ratio of the concentrations of the products to the reactants, raised to the power of each concentration's stoichiometric coefficient. In this case, the expression for the equilibrium constant (Kc) would be: [H2CO3] / ([H2O][CO2]). Note that the concentration of water is not generally considered in the expression since water is a pure liquid.

https://brainly.com/question/32445000

#SPJ2

The reactants are hydrochloric acid (HCI) and sodium hydroxide (NaOH). The products formed as a result of the reaction are sodium chloride (NaCl) and water (H₂O).

NaCl is not a reactant, but rather a compound formed as a product in the reaction between HCI and NaOH. H₂O is not a reactant in the first two reactions mentioned, but it is a product formed in the reaction between NaCl and H₂O, and in the reaction between HCI and NaOH.

What is salt?

salt refers to any ionic compound formed by the reaction between an acid and a base. The term "salt" is used to describe the product of this type of reaction because it often forms crystals with a crystalline structure that is similar to that of table salt (sodium chloride).

To know more about hydrochloric acid visit:-

https://brainly.com/question/15102013

#SPJ1