Order the anionic compounds from the most basic to least basic? 3) 1) 2) Magnify Select One Strongest base Second strongest Match With B 3) Weakest base C 2)

Explanation:

If we look at the definition of the second electron affinity:

The second electron affinity is the enthalpy change when one mole of gaseous 2⁻ ions is formed from one mole of gaseous 1⁻ ions

The equations of the second electron affinity for oxygen and sulfur:

O⁻ (g) + e⁻ → O²⁻ (g)

S⁻ (g) + e⁻ → S²⁻ (g)

This process is endothermic as we are trying to combine an electron with a negative ion, and so we must overcome the repulsion. Applying energy will overcome it.

The second electron affinity is the energy change that occurs when an atom in the gaseous state gains an additional electron.

For both oxygen and sulfur, the second electron affinity values are unfavorable, meaning that the energy change that occurs is endothermic. This means that energy is being absorbed by the atom, and the atom is becoming more stable.
To understand why the second electron affinity values for oxygen and sulfur are unfavorable, it is important to look at the electron configurations of these atoms. Oxygen's electron configuration is 2s22p4, meaning it has 8 electrons in its outermost shell. Sulfur has an electron configuration of 2s22p63s2, meaning it has 16 electrons in its outer shell. Since both of these atoms have a full outer shell of electrons, they are not in need of an additional electron, and therefore do not have a strong tendency to gain one. As a result, it takes a lot of energy for the atom to gain an additional electron, meaning the second electron affinity value is unfavorable (endothermic).

In conclusion, the second electron affinity values for oxygen and sulfur are unfavorable (endothermic) because they already have full outer shells of electrons and do not have a strong tendency to gain an additional electron.

To know more about endothermic reaction  click on below link :

https://brainly.com/question/23184814

#SPJ11

In the "Reactions" section of your Pre-lab notebook, you should have two reaction schemes involving the alkene. The correct answer is option d.

The Pre-lab notebook is a collection of worksheets and pre-lab assignments that students must finish before lab. This may include preparing solutions, making graphs, filling out data tables, or writing lab reports.A pre-lab notebook is a place where students may record and evaluate their work before and during a laboratory session. It is a document that is kept by the student and used to help them comprehend the material that is presented to them.

The Pre-lab notebook is divided into three sections: the Procedures section, the Data section, and the Reactions section. An alkene is a hydrocarbon that contains a carbon-carbon double bond. Alkenes are typically unsaturated and highly reactive. Alkenes are used in a variety of industries, including the production of plastics, synthetic rubbers, and fibers. Alkenes are also used as solvents in many applications.

They are known for their ability to react with a variety of other compounds. This will ensure you cover a range of possible reactions and provide a comprehensive understanding of the alkene's behavior in different situations.

To know more about alkene, refer here:

https://brainly.com/question/31033378#

#SPJ11

Answer:

Sublimation, the dry ice changes to a gas, solid to gas is sublimation

The half-life of the isotope is 11.2 years.

The half-life of a radioactive isotope is the time it takes for half of the atoms in a sample to undergo radioactive decay. For a radioactive isotope with a decay rate of 6.2 percent per year, the half-life can be calculated as follows:

Half-life = ln(2) / (decay rate) = ln(2) / 0.062 = 11.2 years (rounded to the nearest tenth)

To understand this calculation in further detail, it is helpful to consider the concept of radioactive decay in terms of probability. After one half-life has elapsed, there is a 50 percent chance that an atom will have decayed, and a 50 percent chance that it will remain undecayed. After two half-lives have elapsed, there is a 75 percent chance that an atom will have decayed, and a 25 percent chance that it will remain undecayed.

This concept can be applied to the equation above, as the probability of decay during a single time interval is equal to the decay rate multiplied by the length of the time interval. By solving this equation, the half-life of a given radioactive isotope can be determined.

Learn more about half-life here: https://brainly.com/question/1160651.

#SPJ11

The density of the metal is 1.167 g/ml.

The density of the metal can be calculated using the formula for density, ρ:

ρ = m /v

where ρ is the density, m is the mass, and v is the volume.

In this case, the mass of the metal is 31.5g and the volume can be determined by subtracting the initial volume (51mL) from the final volume (78mL) of water in the graduated cylinder. Thus, the volume of the metal is 27mL.

Using the formula, the density of the metal is then:

ρ = 31.5 g / 27mL

ρ = 1.167 g/ml

This means that 1 mL of the metal has a mass of 1.167g. Density is an important property of materials, as it affects other properties such as buoyancy. Generally, materials with a higher density will sink in a liquid, while those with a lower density will float.

Learn more about density here: https://brainly.com/question/1354972.

#SPJ11

The layers of the sun can be seen in the image attached.

The sun is composed of several layers, including:

Core: The innermost layer of the sun where nuclear fusion takes place. The temperature in the core is about 15 million degrees Celsius.

Radiative Zone: This layer is between the core and the convection zone. Energy produced in the core is transported through the radiative zone by photons.

Convection Zone: The outermost layer of the sun's interior where hot gas rises and cooler gas sinks. The energy produced in the core is carried to the surface by convection.

Photosphere: The visible surface of the sun where most of the sun's light is emitted. The temperature of the photosphere is around 5,500 degrees Celsius.

Chromosphere: A thin layer above the photosphere that emits a reddish glow during solar eclipses. The temperature of the chromosphere ranges from 4,000 to 10,000 degrees Celsius.

Corona: The outermost layer of the sun's atmosphere, extending millions of kilometers into space. The temperature of the corona is extremely high, around 1 to 3 million degrees Celsius.

Learn more about the sun:https://brainly.com/question/17376727

#SPJ1

The nonzero quantity is Heat Transfer.

Heat Transfer is the only quantity that must be nonzero for a constant pressure process at 300K and 1 atm. This is because Heat Transfer is the amount of energy that is required to maintain constant pressure.

All other quantities in this process, such as Work, Internal Energy, and Enthalpy, are zero for a constant pressure process at a given temperature and pressure.

Therefore, the quantity that is nonzero for this constant pressure process at 300k and 1 atm is Heat Transfer.

To know more about Heat Transfer, refer here:

https://brainly.com/question/13433948#

#SPJ11

A  series of solutions with a range of precisely known analyte concentrations. Option D

A calibration curve is a graphical representation of the relationship between the concentration or amount of a substance, and a signal or measurement obtained from an analytical instrument or assay. The calibration curve is constructed by measuring the signal or response of the instrument or assay at different known concentrations or amounts of the substance, and plotting these values on a graph.

The resulting curve is then used to determine the concentration or amount of the substance in an unknown sample by measuring its signal or response and comparing it to the calibration curve.

Learn more about calibration curve:https://brainly.com/question/29729322

#SPJ1

The statement "it is fine to enter an area where there is a chemical spill as long as you are very careful" is False. because A chemical spill refers to the uncontrolled release of one or more hazardous substances.

A chemical spill refers to the uncontrolled release of one or more hazardous substances, which can include liquids, gases, or solids, which might pose a significant threat to the environment and human health. The person responsible for a chemical spill is responsible for managing, containing, and cleaning up the hazardous material to prevent environmental or public health damage.

Following a chemical spill, there is a protocol to be followed to guarantee that no harmful substances have been released into the environment that may cause harm to the public. The presence of toxic chemicals in a confined area poses a significant threat to human health, making it hazardous to enter that location. Even if the spill is small, entering an area where a chemical spill has occurred is hazardous. The contamination may disperse through the air, and you may inhale it or the substance may adhere to your clothing and skin, putting you at risk. You should not go near a chemical spill if you are not wearing appropriate protective gear. This is because it is not advisable to enter an area where there is a chemical spill.

For more such questions on chemical spill , Visit:

https://brainly.com/question/30256645

#SPJ11

The ability of open systems to fight off deterioration, sustain themselves and grow is Negative Entropy. Correct answer is option C

Negative Entropy is an important concept in thermodynamics and physics, where it is defined as a decrease in the entropy of a system. Entropy is the measure of randomness or disorder in a system, so negative entropy indicates that a system is becoming more organized, or that it is moving away from equilibrium.

This can be seen in the evolution of life, where species become more complex and adaptive over time, as well as in the growth of technology, where innovations allow us to become more efficient and productive. In essence, Negative Entropy is the power that allows open systems to improve and evolve. Therefore Correct answer is option C

Know more about thermodynamics here:

https://brainly.com/question/1368306

#SPJ11

Answer: 100cm3 of gas at 27°c exert a pressure of 750mmHg. Calculate its pressure if it's volume is increased to 250cm3 at 127°c? In Chemistry

Explanation:

The pH of a solution if 10 ml of a 1 M HCl solution is added to 10 ml of a 1 M NaOH solution can be calculated as follows:

First, let's find the number of moles of HCl and NaOH in the solution. Number of moles of HCl = Concentration of HCl x Volume of HClNumber of moles of HCl = 1 M x (10 ml/1000 ml)Number of moles of HCl = 0.01 molesNumber of moles of NaOH = Concentration of NaOH x Volume of NaOHNumber of moles of NaOH = 1 M x (10 ml/1000 ml)Number of moles of NaOH = 0.01 molesNext, let's find the net number of moles of H+ and OH- ions.Number of moles of H+ ions = Number of moles of NaOH - Number of moles of HCl.Number of moles of H+ ions = 0.01 - 0.01Number of moles of H+ ions = 0 molesNumber of moles of OH- ions = Number of moles of HCl - Number of moles of NaOHNumber of moles of OH- ions = 0.01 - 0.01Number of moles of OH- ions = 0 molesSince the net number of moles of H+ ions and OH- ions is zero, the solution is neutral. The pH of a neutral solution is 7. Therefore, the pH of the solution is 7.

To know more about pH  click on below link :

https://brainly.com/question/491373#

#SPJ11

Answer : When mixing 538 grams of a substance into 647 ml of water, the concentration of the resulting solution in g/L is 0.83.

The concentration of the resulting solution in g/L can be calculated by dividing the mass of the substance (538 g) by the total volume of the solution (647 ml). This gives us a result of 0.83 g/L.

To further explain this calculation, we must first understand the concepts of mass and volume. Mass is a measure of the amount of matter an object contains. Volume, on the other hand, is the amount of space occupied by a given object. When mixing 538 grams of a substance into 647 ml of water, we are creating a solution with a certain concentration of the substance.

To calculate the concentration of the resulting solution, we must divide the mass of the substance (538 g) by the total volume of the solution (647 ml). This gives us a result of 0.83 g/L.

Know more about mass here:

https://brainly.com/question/14014782

#SPJ11

The empirical formula of the given compound can be determined as follows the CHOS or C3H4O3.

According to the given data, the compound citric acid contains 37.51% C, 4.20% H, and 58.29% O by mass. So, let's assume that we have 100 g of citric acid, and then, we can find the masses of each element present in it: Mass of carbon = 37.51 gMass of hydrogen = 4.20 g. Mass of oxygen = 58.29 g.

Next, we need to convert the masses into the number of moles using the molar masses of the elements. The molar mass of carbon = 12.01 g/mol, Number of moles of carbon = 37.51 g / 12.01 g/mol = 3.124 molMolar mass of hydrogen = 1.01 g/molNumber of moles of hydrogen = 4.20 g / 1.01 g/mol = 4.158 molMolar mass of oxygen = 16.00 g/molNumber of moles of oxygen = 58.29 g / 16.00 g/mol = 3.643 follow, we need to find the simplest whole-number ratio of these moles by dividing them by the smallest number of moles, which is 3.124 mol: Carbon = 3.124 mol / 3.124 mol = 1Hydrogen = 4.158 mol / 3.124 mol = 1.33 ≈ 1Oxygen = 3.643 mol / 3.124 mol = 1.17 ≈ 1So, the empirical formula of citric acid is CHOS or C3H4O3.

Read more about carbon:

https://brainly.com/question/19083306

#SPJ11

The aldol reaction involves the reaction of an aldehyde or ketone with an enolate ion to form a β-hydroxyaldehyde or β-hydroxyketone, followed by a dehydration to form a double bond.

The aldol reaction is an important organic reaction in the formation of new carbon–carbon bonds. The reaction is named after the aldol reaction product, which contains both aldehyde and alcohol groups.

The aldol addition reaction has three mechanistic steps, which are deprotonation, nucleophilic attack, and protonation. These steps are explained below:

(1) Deprotonation: In the first step of the aldol reaction, the base removes a proton from the α-carbon of the carbonyl compound, which leads to the formation of the enolate ion.

The enolate ion is a resonance-stabilized anion that contains a negative charge on the oxygen atom and a double bond between the carbon and oxygen atoms.

(2) Nucleophilic attack: In the second step of the aldol reaction, the enolate ion acts as a nucleophile and attacks the carbonyl group of another molecule of the aldehyde or ketone.

This leads to the formation of a β-hydroxyaldehyde or β-hydroxyketone intermediate.

(3) Protonation: In the final step of the aldol reaction, the β-hydroxyaldehyde or β-hydroxyketone intermediate is protonated by the acid.

This leads to the formation of the aldol addition product, which contains a new carbon–carbon bond.

Thus, the aldol addition reaction involves three mechanistic steps, which are deprotonation, nucleophilic attack, and protonation.

These steps are essential for the formation of the aldol addition product, which contains a new carbon–carbon bond.

The aldol reaction is an important organic reaction that is widely used in the synthesis of natural products and pharmaceuticals.

to know more about aldehyde refer here:

https://brainly.com/question/30722723#

#SPJ11

The pH value of the resulting solution assume the volume of the solution is not affected by this addition is 3.283.

The pH scale determines how acidic or basic water is. The range is 0 to 14, with 7 representing neutrality. Acidity is indicated by pH values below 7, whereas baseness is shown by pH values above 7. In reality, pH is a measurement of the proportion of free hydrogen and hydroxyl ions in water.

In this Question, HF is a Weak Acid and RbF is a weak Base - HNO3  is a strong acid.

HF reaction in aqueous medium

HF +  H2O  --------- H3O+  + F -  

RbF +  H2O  ----  Rb+ +  F -

pH (Original)  =  pKa  +  log ( [salt ] / [Acid] )  

We donot need to calculate pH original -which is for the original solution before adding the strong acid.

HF is a weak acid - so in a buffer solution its dissociation is negligible - so it does not affect the H+  ion concentration much.

When a 0.012 mol of HNO3  is added to the buffer solution , it dissociates in H+ and NO-3  .

H+ ions dissociated from the Acid react with F -  and produce HF . As a result the acid concentration will increase to the extent of 0.012 mol  and the salt concentration reduces by the same extent - 0.012 mol.

So the formula for New pH changes to

pH (New)  =  pKa  +  log ( [salt ] - 0.012 mol / [Acid] + 0.012 mol)

Here , 0.012 mol are added to 281 mL solution,

Concentration of HNO3,  M = number of moles / Vol in litres  

                                            =  0.012 mol / 281 mL

                                            =  0.012 mol / 281  / 1000

                                           = [0.012 mol x 1000]  / 281 L  =  0.043 M

As pKa = -log(Ka)  ,  

Given  [salt ] =  0.480 M ,  [Acid] =  0.318 M

                   = - log(Ka) +  log [ (0.480 M - 0.043 M) / (0.318 M + 0.043 M) ]

                        =  - log (6.31 x 10-4 )   +  log ( 0.437 / 0.361)

      pH (New)    =  3.20 + 0.083  = 3.283.

Learn more about pH value:

https://brainly.com/question/10603602

#SPJ4

Complete question:

A biochemist wanted to adjust the pH of 281 mL of a buffer solution composed of 0.318 M HF and 0.480 M RbF (K, = 6.31e - 04) by adding 0.012 moles of HNO3. Determine the pH of the resulting solution: pH number (rtol=0.02, atol=1e-08)

Answer:

Multiple scientists, including Albert Einstein, David Bohm, John Bell, and Roger Penrose, have challenged certain aspects of quantum theory due to differing views about particle behavior, hidden variables, and consciousness. Despite the challenges, quantum theory remains widely accepted as one of the most accurate and well-tested frameworks in modern physics.

UV active compounds are those that fluoresce when exposed to a UV lamp. Upon exposure to UV light, these compounds absorb energy and promote an electron from the HOMO to the LUMO. Consider which wavelengths are included in the UV range. CH2=CH2, CH2=CH-CH=CH-CH=CH, CH2=CH-CH=CH-CH=CH-CH=CH, CH2=CH-CH2-

CH=CH, and CH, =CH-CH=CH are all examples of UV active compounds.


The UV active compounds in the given list are CH2=CH-CH=CH-CH=CH, CH2=CH-CH=CH-CH=CH-CH=CH, and CH2=CH-CH2-CH=CH. These compounds will **fluoresce** when exposed to a **UV lamp** and absorb energy to promote an electron from the HOMO to the LUMO.

To determine if a compound is UV active, consider the presence of **chromophores** within the molecule. Chromophores are functional groups that absorb UV light, typically containing conjugated double bonds or aromatic rings. In this case, the first three compounds have conjugated double bonds, making them UV active. The fourth compound, CH=CH-CH=CH, lacks sufficient conjugation to be UV active.

For more similar questions on topic dissociate

brainly.com/question/15321204

#SPJ11

The nature of the bond indicated in the diagram above would be the nonpolar covalent bond. That is option A.

A Nonpolar Covalent bond is defined as the type of chemical bond that is formed when electrons are shared equally between two atoms.

While polar covalent bond is defined as the type of chemical bond that is formed when electrons are shared unequally between two atoms.

For example, molecular oxygen (O2) is nonpolar because the electrons will be equally distributed between the two oxygen atoms.

Therefore the type of bond that is indicated in the diagram above is a nonpolar covalent bond.

Learn more about covalent bond here:

https://brainly.com/question/29630777

#SPJ1

True, a saturated hydrocarbon has the maximum amount of hydrogens attached to the carbon skeleton.

Hydrocarbons are organic molecules that are made up of only carbon and hydrogen atoms. They may be composed of chains of various lengths, rings of various sizes, or a combination of both. The simplest hydrocarbons, such as methane (CH4), ethane (C2H6), and propane (C3H8), are gaseous at room temperature, whereas larger hydrocarbons are liquids, such as hexane (C6H14), or solids, such as hexadecane (C16H34).

Unsaturated hydrocarbons have carbon-carbon double or triple bonds in their structures, indicating that they are not completely saturated with hydrogen atoms. These hydrocarbons are commonly referred to as alkenes or alkynes, respectively. Alkenes have one double bond, whereas alkynes have one triple bond.

Read more about hydrocarbon :

https://brainly.com/question/22047391

#SPJ11

The original volume of the container is 5.40 L.

The given final volume of a container when heated is 15.5 L. The container expands when heated from 159 K to 456 K.  

The formula used to solve this problem is:

V1 = (V2 × T1) / T2

V1 is the original volume of the container

V2 is the final volume of the container

T1 is the final temperature of the container

T2 is the initial temperature of the container

Let's substitute the given values in the above formula:

V1 = (15.5 × 159) / 456V1 = 5.40 L

Therefore, the original volume of the container is 5.40 L.

To know more about original volume click here:

https://brainly.com/question/12014506

#SPJ11

When animals consume food containing large polymeric molecules, such as proteins, carbohydrates, and nucleic acids, their digestive system breaks down these molecules into smaller components that can be absorbed and utilized by the body.

Mechanical digestion occurs in the mouth and stomach, where food is broken down into smaller pieces through chewing and mixing with digestive enzymes and acids. Chemical digestion occurs primarily in the small intestine, where enzymes and other compounds break down complex molecules into smaller components.

Proteins, for example, are broken down into their constituent amino acids by proteases, while carbohydrates are broken down into simple sugars like glucose and fructose by amylases. Nucleic acids are broken down into nucleotides by nucleases.

Once these molecules are broken down, they are absorbed into the bloodstream through the walls of the small intestine and transported to the liver, where they are further metabolized and distributed to other parts of the body as needed. The body then uses these molecules to build new proteins, carbohydrates, and nucleic acids or to generate energy through cellular respiration. Any excess molecules are typically stored for later use or eliminated from the body as waste.

To know more about molecules, here

brainly.com/question/4745152

#SPJ4

--The complete question is, What happens to large polymeric molecules in food once they are eaten by animals?--

These are all examples of chemical hazardous waste. Chemical hazardous waste is waste that is flammable, reactive, corrosive, or toxic. It can include things like unused pesticides, paint, cleaning products, or batteries.

Old ammunition or fireworks, lithium-sulfur batteries, wastes containing cyanides or sulfides, and chlorine bleach and ammonia are examples of Household hazardous waste.What is hazardous waste?Hazardous waste is a waste material that is harmful to human health or the environment. Every year, households and businesses generate hazardous waste in various forms. Because hazardous waste may be flammable, poisonous, reactive, or corrosive, it requires special disposal procedures. Hazardous wastes must be properly disposed of to safeguard human health and the environment.Household hazardous waste (HHW) is the type of waste that can be found in a typical home. This waste is produced by households when they use products that contain harmful chemicals. Old ammunition or fireworks, lithium-sulfur batteries, wastes containing cyanides or sulfides, and chlorine bleach and ammonia are examples of household hazardous waste.

For more such questions on hazardous waste

https://brainly.com/question/4055432

#SPJ11

Answer:

c.no is a correct answer

2.27 M is the molarity of a solution made by dissolving 1.25moles of Na[tex]_2[/tex]CrO[tex]_4[/tex] in enough water to form exactly 0.550 l of solution.

A chemical solution's concentration is measured in molarity (M). It refers to the solute's moles per litre of solution. Keep in mind that this is not the same as solvent in litres (a common error). Although molarity is a useful unit, it does have one significant drawback. Temperature impacts a solution's volume, therefore when the temperature varies, it does not stay constant. Typically, you convert grammes of solute to moles and then divide this quantity by litres of solution because you cannot measure solute in moles physically.

Molarity = moles of solute/volume of solution in liters

Molarity = 1.25 moles/0.550 L = 2.27 M

To know more about molarity, here:

https://brainly.com/question/31545539

#SPJ12

The partial pressure of Ar is 0.219 * 1,380 mmHg = 301 mmHg.

The partial pressure of a gas in a mixture is equal to the mole fraction of that gas times the total pressure of the mixture.

The mole fraction of Ar in this mixture is 1.50/6.81 = 0.219. Thus, the partial pressure of Ar is 0.219 * 1,380 mmHg = 301 mmHg.

The ideal gas law states that the pressure of a gas is directly proportional to its number of moles and inversely proportional to its volume.

This law is expressed in the equation PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

In a mixture of gases, each gas behaves independently according to the ideal gas law. Thus, the total pressure of the mixture is the sum of the partial pressures of each gas.

The partial pressure of a gas is equal to its mole fraction times the total pressure. The mole fraction of a gas is the number of moles of that gas divided by the total number of moles of all gases in the mixture.

In the example provided, the total pressure of the mixture is 1,380 mmHg, the number of moles of CO2 is 1.27, the number of moles of CO is 3.04, and the number of moles of Ar is 1.50.

The total number of moles of all gases in the mixture is 1.27 + 3.04 + 1.50 = 6.81. The mole fraction of Ar is 1.50/6.81 = 0.219. Thus, the partial pressure of Ar is 0.219 * 1,380 mmHg = 301 mmHg.

To  know more about partial pressure refer here:

https://brainly.com/question/13199169#

#SPJ11

The correct reduction half-reaction for the given chemical equation (Zn(s) + CuSO₄(aq) → Cu(s) + ZnSO₄(aq)) is:

Cu²⁺(aq) + 2e⁻ → Cu(s)

1. First, let's identify the species that are changing their oxidation states in the reaction. It's zinc (Zn) and copper (Cu).

2. Zn is undergoing oxidation, as it is losing electrons and forming Zn²⁺ in ZnSO₄. Cu²⁺ from CuSO₄ is gaining electrons and forming elemental copper (Cu).

3. Now, we'll focus on the copper half-reaction to find the reduction half-reaction. Reduction is the process of gaining electrons, so we need to identify the half-reaction where Cu²⁺ gains electrons.

4. The given reduction half-reaction is Cu²⁺(aq) + 2e⁻ → Cu(s), which represents the process where Cu²⁺ ions from the copper sulfate solution gain two electrons to form solid copper.

5. To confirm this, we can check the other options provided:

a. Ag⁺(aq) + Cl⁻(aq) → AgCl(s) - This is a precipitation reaction

b. Fe²⁺(aq) → Fe³⁺(aq) + e⁻ - This is an oxidation half-reaction involving iron

c. HF(aq) + OH⁻(aq) → H₂O(l) + F⁻(aq) - This is an acid-base neutralization reaction

So, the correct reduction half-reaction for the given chemical equation is Cu²⁺(aq) + 2e⁻ → Cu(s).

to know more about half-reaction refer here:

https://brainly.com/question/13109589#

#SPJ11

We just use molar mass for FeF3 (129.9 g/mol) to calculate the number  moles in 3.5grammes of FeF3. Hence, just 3.5 x 129.9 = 4546.5 moles of FeF3 need to be multiplied.

An object's mass is determined by how much matter it has. Something that has more substance will weigh heavier overall. For instance, because an elephant contains more stuff than a mouse does, it has a heavier mass.

55.8+3⋅19=116 g/mole24 g116 g/mol=0.207 moles of FeF3

0.207 moles×6.022×23molecules/mole=1.2×1023molecules

A thing's mass is how much matter it contains. Using a balance, scientists frequently determine mass. A beam balance or perhaps an electronic balance can be used to measure the mass of solids directly. Measure a liquid's volume, then use the density table to determine the liquid's mass.

To know more about mass  visit:

https://brainly.com/question/15959704

#SPJ1

1. I modeled a decomposition reaction.

2. used hydrogen peroxide (H2O2) as the compound for the reaction.

3. The reaction is exothermic. This is because the decomposition of hydrogen peroxide releases heat and energy, which can be observed through the effervescence or bubbling of the solution.

4. I recorded a video demonstrating the experiment and the resulting reaction.

5. A closed system is suitable for this reaction because it follows the law of conservation of mass, which states that mass cannot be created or destroyed, only transferred or transformed.

6. The potential energy diagram for this reaction would show the reactants at a higher energy level (400 KJ) and the products at a lower energy level (200 KJ), with the difference in energy being released as heat and energy.

7. The reaction is exothermic because it releases heat and energy, as observed through the effervescence or bubbling of the solution.

8. Factors that could affect the reaction rate include temperature, catalysts, and concentration of the reactants.

What is decomposition reaction?

A decomposition reaction is a type of chemical reaction in which a compound breaks down into two or more simpler substances. This type of reaction usually requires the addition of energy, such as heat or light, to break the bonds holding the compound together.

To know more about decomposition reaction, visit:

https://brainly.com/question/16987748

#SPJ1

In summary, the mass percent of the sulfuric acid solution is 29.89%, the molality is 4.35 mol/kg, and the normality is 7.5 N.

To calculate the mass percent, molality, and normality of the 3.75 M sulfuric acid solution, follow these steps:
First let's calculate the mass of 1 liter of the solution:
We know, Density = mass/volume. So, mass = density × volume = 1.230 g/mL × 1000 mL = 1230 g
Now, calculating the mass of sulfuric acid (H2SO4) in 1 liter of the solution:
Molarity = moles of solute/volume of solution. So moles of solute = molarity × volume = 3.75 mol/L × 1 L = 3.75 mol
The molar mass of H2SO4 = (2 × 1.01) + (32.07) + (4 × 16) = 98.08 g/mol
Mass of H2SO4 = moles × molar mass = 3.75 mol × 98.08 g/mol = 367.8 g
To Calculate the mass percent of H2SO4:
Mass percent = (mass of solute / mass of solution) × 100
= (367.8 g / 1230 g) × 100 = 29.89%
To Calculate the molality of H2SO4:
Molality = moles of solute / mass of solvent (in kg)
Mass of solvent = mass of solution - mass of solute = 1230 g - 367.8 g = 862.2 g = 0.8622 kg
Molality = 3.75 mol / 0.8622 kg = 4.35 mol/kg
To Calculate the normality of H2SO4:
Normality = molarity × number of equivalents per mole
For H2SO4, there are 2 acidic hydrogens (protons) that can be released, so the number of equivalents per mole = 2.
Normality = 3.75 M × 2 = 7.5 N
In summary, the mass percent of the sulfuric acid solution is 29.89%, the molality is 4.35 mol/kg, and the normality is 7.5 N.

Learn more about mass percent, molarity and normality here, https://brainly.com/question/20349446

#SPJ11