P_{4}(s) + F_{2}(g) > P*F_{3}(g) calculate the moles of that will be required to produce 27. 5 grams of PF3

The reaction system CO(g) + 2 H2(g) = CH3OH(g) is at equilibrium, meaning that the rate of the forward reaction is equal to the rate of the reverse reaction. If H2 is added to the container, the forward reaction becomes favoured and shifts to the right. This increases the amount of products (CH3OH) formed, and decreases the amount of reactants (CO and H2). As a result, the partial pressure of CO remains the same, while the partial pressure of CH3OH decreases.

This is due to Le Chatelier's Principle, which states that when a system at equilibrium is subjected to an external stress, the system will adjust to minimize the stress. In this case, the stress is the addition of H2, which is favouring the formation of products and disrupting the equilibrium. The system responds by decreasing the amount of products formed and shifting the reaction back to equilibrium.

Know more about equilibrium here:

https://brainly.com/question/3920294

#SPJ11

Moles of lead nitrate used mol Product mass Molar mass Pb 207 g/mol Molar mass N 14 g/mol Molar mass o 16 g/mol =  56 .65 %

moles of Pb([tex]NO_{3}[/tex]) = 14.8 / 331 = 0.0447

∵ moles = mass / molar mass

[tex]Pb(NO_{3}) + 2Cl = pbcl_{2} + 2NO_{3}[/tex]

[tex]\frac{moles of Pb (NO_{3}) }{1} = \frac{moles of Pbcl_{2} }{1}[/tex]

moles of [tex]Pbcl_{2}[/tex] = 0.0447

Theoretical mass of [tex]Pbcl_{2}[/tex] = moles * molar mass

= 0.0447 * 278

= 12.4266

% yield = Actual mass of [tex]Pbcl_{2}[/tex] / Theoretical mass of [tex]Pbcl_{2}[/tex] * 100

= [tex]\frac{7.04}{12.4266} * 100[/tex]

= 56 .65 %

Lead(II) chloride (PbCl2) is an inorganic compound that is white strong under surrounding conditions. It is ineffectively solvent in water. Lead(II) chloride is one of the main lead-based reagents. It likewise happens normally as the mineral cotunnite.

To know more about chloride click here.

brainly.com/question/15296925

#SPJ4

the complete question is:

Begin Scenario An experiment was carried out to make lead chloride from lead nitrate. 7.04 g of lead chloride was obtained from 14.8 g of lead nitrate. Determine the percentage yield of lead chloride. Reactant mass 14.8 g 7.04 g a Determine the moles of lead nitrate, PbNO3, used in the experiment (To avoid introducing rounding errors on intermediate calculations, enter your answer to four significant figures.) Moles of lead nitrate used mol Product mass Molar mass Pb 207 g/mol Molar mass N 14 g/mol Molar mass o 16 g/mol

For N2, 1 is the right whole number coefficient. N2 + 3H2 → 2NH3 is the balanced chemical reaction.

Equal numbers and types of each atom appear on both sides in case of balanced chemical equations, which is why they are called so. A balanced equation must have coefficients that are the simplest whole number ratio. For the chemical equation to adhere to the rule of conservation of mass, it must be balanced.

Equal numbers of atoms from various elements are present in both the reactants and the products in balanced chemical equations. Different elements' atom counts in the reactants and products of unbalanced chemical equations are varied.

To learn more about balanced chemical equations visit:

brainly.com/question/28294176

#SPJ1

1 mole of methane (CH4) is burned it releaes 326.3 KJ of heat then the ΔH for the process in which 8.7 g of methane is burned is 176.8 kJ.

the number of moles of methane in 8.7 g:

molar mass of CH4 = 12.01 + 4(1.01) = 16.05 g/mol

moles of CH4 = 8.7 g / 16.05 g/mol = 0.542 moles

Now, we can use the given information to calculate the heat released:

ΔH = q/n

where q is the heat released and n is the number of moles of methane.

ΔH = (326.3 kJ/1 mol) x (0.542 mol) = 176.8 kJ.

Methane is a chemical compound that consists of one carbon atom and four hydrogen atoms, with the chemical formula CH4. It is a colorless, odorless, and flammable gas that is the main component of natural gas. Methane is the simplest hydrocarbon molecule and is a major contributor to greenhouse gas emissions. It is produced naturally by the breakdown of organic matter in wetlands, rice paddies, and the digestive systems of some animals.

Learn more about Methane here:

https://brainly.com/question/2127750

#SPJ1

Answer:

c

Explanation:

Answer:

its actually d

Explanation:

I dont know why all I know is c was wrong and d was correct

Answer:

Hair

Explanation:

Colloid is used as thickening agents in industrial products, such as toothpaste, paints, inks, etc. Milk is one of the most common colloids, because of the thickening agents. spray, clouds, fog, etc., are a type of colloid. Paint is a type of colloid because it disperses particles through the paint. Alloy is an example of a colloidal solution. Hair does not have anything to do with colloid.

Unable to tell if this process is endothermic or exothermic because it is not stated whether energy is released or absorbed.

Energy has the ability to perform work. It is a quantifiable quality that may be transferred to a physical system or body, and it can be seen when work is being done. Potential, kinetic, thermal, electrical, chemical, and radioactive forms of energy can all exist.

The energy shift that takes place during the reaction determines the type of reaction, whether it is exothermic or endothermic. It is an exothermic reaction if energy is released during the reaction. On the other side, a reaction is said to be endothermic if energy is absorbed during it[2]. According to the chemical equation, a + 2b + energy ab2.

You can tell whether a chemical process releases or absorbs energy overall by measuring the enthalpy of the reaction. The heat energy change that occurs as reactants turn into products is known as a reaction's enthalpy(H). H is positive if heat is absorbed throughout the process; if heat is emitted, H is negative. Exothermic processes have enthalpies that are less than zero and, as a result, are negative, while endothermic reactions have enthalpies that are more than zero and, as a result, are positive.

We cannot tell if this chemical reaction is endothermic or exothermic because the chemical equation contains no information about the value of energy.

To know more about energy, visit:

https://brainly.com/question/1932868

#SPJ1

Effusion can be defined as the leakage of gas molecules from a container through a tiny hole.

Effusion is one of the important physical properties of gases. It is defined as the process in which gas molecules pass through a tiny hole from one compartment to another. Effusion is based on Graham's law which states that "the rate of effusion of a gas is inversely proportional to the square root of its molecular mass or weight. "This law was proposed by Thomas Graham in 1846. It states that the effusion rate of a gas is inversely proportional to the square root of its molar mass.

Know more about effusion

https://brainly.com/question/2097955

#SPJ11

The definition of effusion is the leakage of gas molecules from a container through a tiny hole.

Effusion refers to the process by which a gas flows through a tiny hole in a container into an area of lower pressure. The rate of effusion can be influenced by factors such as the size of the hole, the mass of the gas molecules, and the temperature of the gas. In effusion, the gas molecules move from an area of higher pressure to an area of lower pressure.

The rate of effusion is influenced by several factors, including the size of the hole, the mass of the gas molecules, and the temperature of the gas. The rate of effusion is directly proportional to the average velocity of the gas particles. Therefore, lighter molecules will effuse faster than heavier molecules. The average distance travelled by a particle between collisions is called mean free path while the spreading of gas molecules through space is called diffusion. Therefore, the answer to the question is "the leakage of gas molecules from a container through a tiny hole."

To know more about effusion, refer here:

https://brainly.com/question/28320456#

#SPJ11

To make a 4 molal solution using 9 mol of NaOH, we need 2250 g of water.

NaOH mass equals moles of NaOH times its molar mass, or 360.00 g.

Molality is defined as moles of solute divided by kilograms of solvent.

When we rewrite the equation, we obtain:

mass of the solvent is equal to the product of the solute's moles and its molality.

Inputting the values provided yields:

mass of the solvent equals 9 mol/4 mol/kg

2.25 kg is the solvent's mass.

The mass of water is then converted from kilogrammes to grammes:

2.25 kg times 1,000 g/kg is the mass of water.

water weighs 2250 g.

To learn more about molal solution visit:

brainly.com/question/26921570

#SPJ1

The molecule becomes oxidized when a glucose molecule loses a hydrogen atom due to an oxidation-reduction reaction.

Let's understand this in detail:

1. Oxidation is when the loss of electrons or gain of oxygen atoms takes place from an atom or molecule. In a chemical reaction, if a molecule is oxidized, it will lose electrons or hydrogen or gain oxygen atoms. Oxidation leads to the loss of electrons, resulting in the molecule becoming more positively charged.

2. Reduction is a process in which there is the gain of electrons or loss of oxygen atoms from an atom or molecule. In a chemical reaction, if a molecule is reduced, it will gain electrons or hydrogen or lose oxygen atoms. Reduction leads to the gain of electrons, making the molecule more negatively charged.

3. Glucose is a simple sugar that is the primary energy source for the body's cells. Glucose is a carbohydrate broken down during cellular respiration in the presence of oxygen to produce ATP molecules.

4. The molecule becomes oxidized when a glucose molecule loses a hydrogen atom due to an oxidation-reduction reaction. Oxidation leads to the loss of electrons, resulting in the molecule becoming more positively charged.

Learn more about oxidation-reduction: Describe the process of oxidation in terms of electrons AND energy. https://brainly.com/question/25886015

The number of moles of NaClO that were added to the water are calculated to be 6.23 × [tex]10^{-11}[/tex] mol.

In this case, we know that the pH of the solution is 10.50. Using the formula of pH, we can find the concentration of hydrogen ions.

The pH of a solution can be calculated using the following formula:

pH = -log[[tex]H^+[/tex]]

where [[tex]H^+[/tex]] is the concentration of hydrogen ions in the solution.

Plugging in the values.

10.50 = -log[[tex]H^+[/tex]]

[tex][H^+]=10^{10.50}[/tex]

[tex][H^+] =3.162 \times 10^{-11} mol/L[/tex]

Now, let us find concentration of NaClO.

Since sodium hypochlorite is a salt, it dissociates in water to form ions.

The balanced equation for the dissociation of sodium hypochlorite is:

NaClO(s) → [tex]Na^+(aq) + ClO^-(aq)[/tex]

The concentration of sodium hypochlorite can be calculated from the concentration of hypochlorite ions using the stoichiometry of the reaction.

Since there is a 1:1 ratio between NaClO and , the concentration of NaClO is also [tex]3.162 \times 10^{-11} mol/L[/tex].

To find the number of moles of NaClO added to the solution, we need to multiply the concentration by the volume:

moles NaClO = concentration x volume

moles NaClO = [tex]3.162 \times 10^{-11} mol/L \times 2L[/tex]

moles NaClO = 6.23 × [tex]10^{-11}[/tex] mol.

Therefore, the number of moles of NaClO that were added to the water is 6.23 × [tex]10^{-11}[/tex] mol..

To learn more about pH refer:

brainly.com/question/30934747

#SPJ11

A simple experiment to determine the specific binding, nonspecific binding, and total binding of an agonist at a single concentration would involve the following steps:

1. Pre-incubate a set of samples containing the agonist and various concentrations of the competitive antagonist. This will allow you to calculate the fractional inhibition of binding (FIB) of the agonist by the antagonist.

2. Use the easy assay to measure the binding of the agonist to its target. This will give you the total binding of the agonist.

3. To calculate the nonspecific binding of the agonist, subtract the total binding from the FIB. This will give you an estimate of the amount of agonist that binds to sites other than the target.

4. Finally, to calculate the specific binding of the agonist, subtract the nonspecific binding from the total binding. This will give you an estimate of the amount of agonist that binds to its target.

Using this experiment, you can quickly determine the specific, nonspecific, and total binding of an agonist at a single concentration. This is a valuable tool for understanding how drugs interact with their targets and can be used to optimize drug design and development.

Know more about agonist here:

https://brainly.com/question/14286421

#SPJ11

The balanced chemical equation for the reaction between quicklime (calcium oxide, CaO) and water (H2O) is as follows:

CaO + H2O → Ca(OH)2

This equation represents a classic example of an acid-base reaction, in which the calcium oxide, which is a basic oxide, reacts with water, a proton donor, to form calcium hydroxide, a strong base. The reaction is exothermic and releases a significant amount of heat, making it useful for various industrial applications, such as in cement production and as a desiccant.

Calcium hydroxide, also known as slaked lime, is a white crystalline solid that is sparingly soluble in water and has many applications in agriculture, construction, and environmental remediation.

For such more questions on Quicklime

https://brainly.com/question/17325078

#SPJ4

1. The empirical formula for the sweetener is C₅H₆O

2. The molecular formula for the sweetener is C₁₀H₁₂O₂

The empirical formula for the sweetener can be obtained as follow:

Divide by their molar mass

C = 3 / 12 = 0.25

H = 0.3 / 1 = 0.3

O = 0.8 / 16 = 0.05

Divide by the smallest

C = 0.25 / 0.05 = 5

H = 0.3 / 0.05 = 6

O = 0.05 / 0.05 = 1

Thus, the empirical formula is C₅H₆O

The molecular formula for the sweetener can be obtained as follow:

Molecular formula = empirical × n

Molecular formula = mass number

Thus,

Empirical × n = mass number

[C₅H₆O]n = 164

[(12 × 5) + (1 × 6) + 16]n = 164

[60 + 6 + 16]n = 164

82n = 164

Divide both sides by 82

n = 164 / 82

n = 2

Molecular formula = [C₅H₆O]n

Molecular formula = [C₅H₆O]₂

Molecular formula = C₁₀H₁₂O₂

Learn more about empirical formula:

https://brainly.com/question/29153210

#SPJ1

Number of moles of citric acid used to neutralize the NaOH solution is 0.0467 mol, and the molarity of the citric acid solution is 0.1168 M.

Ratio of a solvent's moles to a solution's total liters is defines as molarity.

As moles of NaOH = moles of citric acid

and moles of NaOH = volume of NaOH solution x concentration of NaOH

moles of NaOH = 0.2 L x 0.7 M

moles of NaOH = 0.14 mol

Since citric acid and NaOH react in a 1:3 molar ratio (i.e., one mole of citric acid reacts with three moles of NaOH), the number of moles of citric acid used to neutralize the NaOH solution is:

here, moles of citric acid = (moles of NaOH)/3

moles of citric acid = 0.14 mol / 3

So, moles of citric acid = 0.0467 mol

molarity of citric acid = moles of citric acid / volume of citric acid solution (in L)

molarity of citric acid = 0.0467 mol / 0.4 L

So, molarity of citric acid = 0.1168 M

Therefore,  number of moles of citric acid used to neutralize the NaOH solution is 0.0467 mol, and the molarity of the citric acid solution is 0.1168 M.

To know more about molarity, refer

https://brainly.com/question/14469428

#SPJ1

Acid deposition is caused when sulphur dioxide (SO2) and nitrogen oxides (NOx) are emitted into our atmosphere. These chemicals SO2 and NOx, react with water, oxygen and other chemicals to form both sulphuric and nitric acids.

Two advantages of buying concentrated products rather than dilute products are that they are generally more cost-effective than dilute products because they require less packaging, transportation, and storage space. And the second advantage is that concentrated products offer greater flexibility and customizability compared to dilute products.

The level of harm a chemical poses depends on various factors, including the specific chemical involved, its concentration, and the mode of exposure. In general, concentrated and dilute chemicals can be harmful if used or mishandled.

Concentrated chemicals can be particularly hazardous because they contain a higher concentration of the active ingredient, which means that a smaller amount of the chemical can have a more potent effect. This can increase the risk of accidental exposure, which can be dangerous or even fatal.

To learn more about acid, visit here:

https://brainly.com/question/14072179

#SPJ1

To estimate the sugar concentration in a gummy bear, we first need to determine the mass of sugar in the gummy bear.

Given that the gummy bear has a mass of 2.3 g and 12% of its mass is sugar, we can calculate the mass of sugar in the gummy bear as follows:

Mass of sugar = 12% x 2.3 g = 0.276 g

Next, we need to convert the volume of the gummy bear to liters, since concentration is typically expressed in units of moles per liter. Since 1 mL = 0.001 L, the volume of the gummy bear is:

Volume of gummy bear = 1 mL = 0.001 L

Now we can calculate the sugar concentration in the gummy bear in units of moles per liter. The molar mass of sugar is about 342 g/mol, so the number of moles of sugar in the gummy bear is:

Number of moles of sugar = 0.276 g / 342 g/mol = 0.000807 mol

Therefore, the sugar concentration in the gummy bear is:

Sugar concentration = number of moles of sugar / volume of gummy bear

= 0.000807 mol / 0.001 L

= 0.807 mol/L

So, the estimated sugar concentration in a gummy bear is 0.807 mol/L.

To know more about concentration, visit :

https://brainly.com/question/10725862

#SPJ1

4 half-lives will occur during this period of time.

Formula used :

where,

a = amount of reactant left after n-half lives and

time t = Initial amount of the reactant.

decay constant = half life of an isotope

n = number of half lives

We have :

a = ?

t = 552 days

n = 4

4 half-lives will occur during this period of time.

The balloon has a 1.88 L volume after cooling in the fridge.

To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas:

(P₁V₁)/T₁ = (P₂V₂)/T₂

Where P is pressure, V is volume, and T is temperature. We can assume that the pressure remains constant since the balloon is open to the atmosphere. Thus, we can simplify the equation to:

(V₁)/T₁ = (V₂)/T₂

Substituting the given values, we have:

V₂ = (V₁ x T₂) / T₁

V₂ = (2.0 L x 276.15 K) / 293.15 K

V₂ = 1.88 L

Therefore, the volume of the balloon after cooling in the refrigerator is 1.88 L.

To learn more about volume refer to:

brainly.com/question/14710169

#SPJ4

The molarity of 2. 0 liters of an aqueous solution that contains 0. 50 mole of potassium iodine, KI is 0.25 M.  

The molarity of an aqueous solution can be calculated using the following formula:  

Molarity = moles of solute / liters of solution.

In this case, we have 0.50 mole of potassium iodine (KI) and 2.0 liters of solution.

Plugging these values into the formula, we get:
Molarity = 0.50 mole / 2.0 liters = 0.25 M
The molarity of the aqueous solution is 0.25 M.

Molarity is a unit of concentration that is commonly used in chemistry. It is defined as the number of moles of solute per liter of solution. The symbol for molarity is M, and it is expressed in units of moles per liter (mol/L).

Molarity is an important concept in chemistry because it allows scientists to describe the concentration of a solution in a quantitative way. It is often used in laboratory experiments to determine the amount of reactant needed or the amount of product produced in a chemical reaction.

For more question on molarity click on

https://brainly.com/question/30404105

#SPJ11

The double replacement reaction's chemical equation for balancing between AgNO3(aq) and Na2CO3(aq) is: 2AgNO3(aq) + Na2CO3(aq) → Ag2CO3(s) + 2NaNO3(aq)

When sodium chloride (NaCl) solution and silver nitrate (AgNO3) are mixed, the ions of both compounds exchange. The consequence is the formation of white precipitates of sodium nitrate solution (NaNO3) and silver chloride (AgCl).

Take a known quantity of standard sodium chloride (e.g., 10 mL diluted to 100 mL for standardised 0.0141 N agNO3 or 50 mL diluted to 100 mL for standardised 0.141 N agNO3). Add 1.0 mL of K2CrO4 indicator solution, 1 spatula of calcium carbonate, and titrate the mixture with AgNO3 to a pinkish-yellow endpoint.

To know more about mixture visit:-

https://brainly.com/question/24898889

#SPJ1

It dοes nοt break dοwn after it is dispοsed οf is likely a negative impact οf pοlyurea. sο, οptiοn (b) is cοrrect.

A chemical reactiοn is the transfοrmatiοn οf οne οr mοre chemicals, knοwn as reactants, intο οne οr mοre new cοmpοunds, knοwn as prοducts. The change in cοncentratiοn οf any οf the reactants οr prοducts per unit οf time can be used tο determine the rate οr speed οf a reactiοn. It is determined by the equatiοn rate = time + cοncentratiοn.

A carbοnyl functiοnal grοup (C=O) cοnnects the twο amine grοups (-NH 2) in the mοlecule. Isοcyanates and amines' alternating mοnοmer units interact with οne anοther tο prοduce urea bοnds in a pοlyurea. A carbamic acid intermediate is prοduced when isοcyanates react with water tο prοduce ureas.

Therefοre, it dοes nοt break dοwn after it is dispοsed οf is likely a negative impact οf pοlyurea. sο, οptiοn (b) is cοrrect.

Learn more about reaction from the given link.

https://brainly.com/question/11231920

#SPJ1

The molecular formula of Ascorbic acid is C6H8O6 having the molar mass of 176.14 g/ mole.

Ascorbic acid is known as the chemical name for Vitamin C. Ascorbic acid is commonly found in high concentrations in citrus fruit. This acid is also found in tomatoes, broccoli, and many other fruits and vegetables. Vitamin C is a nutrient of the body needs to form blood vessels, cartilage, muscle and collagen in bones. This vitamin is also vital to the body's healing process.

A molecular formula is defined as a chemical formula of a molecular compound that shows the kinds and numbers of atoms present in a molecule of the compound. This is a way of presenting information about the chemical proportions of atoms that constitute a particular chemical compound or molecule using chemical element symbols and numbers.

A molecule of the ascorbic acid will have a mass of 176.124 atomic mass units.

This is determined by adding 6 X 12.011 for carbon + 8 X 1.008 for hydrogen + 6 X 15.999 for oxygen.

This is equals to the 72.066 for carbon + 8.064 for hydrogen + 95.994 for oxygen. Added together, these equal 176.124 molecular mass.

To learn more about  Ascorbic acid

https://brainly.com/question/16996726

#SPJ4

Yes, a supersaturated solution will return back to being a saturated solution once a solute crystal has been added.

A supersaturated solution is a solution that contains more dissolved solute than would be possible under normal circumstances at a given temperature and pressure. In a supersaturated solution, the solute molecules are able to remain dissolved in the solvent even though they would normally begin to precipitate out of the solution. This can happen when a solution is prepared by dissolving a solute in a solvent at an elevated temperature and then cooling the solution rapidly, preventing the solute from crystallizing out of the solution. Supersaturated solutions are often unstable and will eventually return to a saturated state if given the opportunity to do so, such as by the addition of a seed crystal or agitation of the solution.

When a solute crystal is added to a supersaturated solution, it provides a nucleation site for the solute to crystallize. As the solute molecules attach to the crystal, they are removed from the solution, causing the concentration to decrease. Eventually, the concentration will decrease to the point where it becomes saturated, and no more solute will dissolve.

Thus, adding a solute crystal to a supersaturated solution causes the excess solute to come out of the solution and return it to a saturated state.

Learn more about supersaturated solution below.

https://brainly.com/question/20536909

#SPJ1

Depending on the severity of the hypothermia, emergency medical care may include one or more of the following measures to increase the body temperature: Rewarming that is done passively. It is sufficient to cover someone suffering from moderate hypothermia with heated blankets .

Remove damp garments with care. Warm, dry jackets or blankets should be used in lieu of damp items. If more warming is required, it should be done gradually. Apply warm, dry compresses to the center of the body, such as the neck, chest, and groin.

Frostbite, or tissue loss induced by tissue freezing, is one of the most prevalent problems linked with hypothermia. Chilblains are caused by nerve and blood vessel injury. Gangrene is also known as tissue death.

Learn more about hypothermia

https://brainly.com/question/1406304

#SPJ1

Answer:

The leadership of Steve Jobs could best be described as a transformational leadership theory. Transformational leaders inspire and motivate their followers by creating an inspiring vision and encouraging creativity, innovation, and change. They also use emotional appeals to get followers to invest in the vision and create a sense of unity and common purpose among the team. Steve Jobs' use of enthusiastic language and charisma to inspire his team reflects the qualities of a transformational leader.