The code for corrosion control of underground storage tank systems by cathodic protection is B) SP0169
Petroleum products are kept in a tank farm before being distributed to end users or retail establishments. A tank farm often has extremely basic amenities. Tanks can be above or below ground, with plumbing to link them to tankers and pipelines to allow fuel to be dispensed and the tanks to be filled. Numerous tank farms are situated close to ports, rail yards, major trucking terminals, and refineries (for convenience). Moving fuel into and out of the farm is made simple by these places. Another possible location for a tank farm is alongside a pipeline that carries petroleum products. In tank farms, cathodic protection systems and grounding systems may be used for corrosion control and safety reasons, respectively.
The correct code for Corrosion Control of Underground Storage Tank Systems by Cathodic Protection is:
B) SP0169
LEARN MORE ABOUT Cathodic Protection
https://brainly.com/question/31557529
#SPJ11
the protein content of most plasma membranes is, on average, about 50p% by weight. myelin has a protein content of about 18% , whereas the internal membranes of mitochondria may be composed of 75u% protein.label the membrane proteins on the diagram.
The plasma membrane is the outer layer of a cell, composed of about 50% protein by weight. The proteins within the plasma membrane are crucial for various functions, such as transportation of molecules, signal transduction, and cell adhesion. These membrane proteins can be integral spanning the entire membrane or peripheral associated with the membrane surface.
The regarding the protein content in various membranes, including plasma membranes, myelin, and the internal membranes of mitochondria. Unfortunately, I cannot label a diagram, but I can provide an explanation for each membrane type. Myelin is an insulating layer that covers the axons of nerve cells, composed of about 18% protein by weight. The main proteins in myelin are myelin basic protein (MBP) and myelin proteolipid protein (PLP). Myelin helps increase the speed of nerve impulse transmission by preventing signal loss through insulation. Mitochondrial Internal Membrane The internal membranes of mitochondria, known as the cristae, are composed of about 75% protein by weight. These proteins are vital for the production of energy in the cell through a process called oxidative phosphorylation. Key proteins include electron transport chain complexes and ATP synthase, which facilitate the generation of ATP, the cell's main energy currency. I hope this information helps you understand the protein content and significance of these different membrane types.
learn more about protein here.
https://brainly.com/question/30986280
#SPJ11
What is the approximate volume of an airbag when it is fully inflated?
Answer:
On average, a driver's side airbag can inflate to a volume of around 60 to 80 liters (16 to 21 gallons), while a passenger's side airbag can inflate to a volume of around 100 to 120 liters (26 to 32 gallons).
Explanation:
The reaction in an airbag involves several elements and compounds, including:
1. Sodium azide (NaN3): This is a primary component of the propellant used in most airbag systems. When heated, sodium azide decomposes into nitrogen gas (N2) and sodium metal.
2. Potassium nitrate (KNO3): This is another component of the propellant that provides additional oxygen to support the combustion of sodium azide.
3. Silica (SiO2): This is a common material used in the manufacture of airbag fabrics. When the airbag inflates, the silica particles in the fabric help to prevent the bag from tearing or puncturing.
4. Nitrogen gas (N2): This is the primary gas produced during the airbag reaction. The nitrogen gas is used to inflate the airbag quickly and provide a cushion between the vehicle occupant and hard surfaces.
5. Carbon dioxide (CO2): This is a secondary gas produced during the airbag reaction. The CO2 is produced as a result of the combustion of sodium azide and the reaction between sodium metal and water vapor present in the air.
Potential
Energy
(kJ)
70
40
20
1. What is the activation energy for this reaction?
2. What is the change in energy for this reaction?
3. Is it exothermic or endothermic?
4. What letter represents the products?
er represents the reactants?
B
Reaction
Coordinate
1. The activation energy for the reaction is 30 KJ
2. The change in energy for the reaction is -20 KJ
3. The reaction is exothermic
4. The letter that represents the products is B
5. The letter that represents the reactants is A
1. How do i determine the activaition energy?The activation energy for the reaction can be obtained as follow:
Energy of reactant = 40 KJPeak energy = 70 KJActivation energy = ?Activation energy = Peak energy - Energy of reactant
Activation energy = 70 - 40
Activation energy = 30 KJ
2. How do i determine the change in energy?The change in energy can be obtain as follow:
Energy of reactant = 40 KJEnergy of product = 20 KJChange in energy = ?Change in energy = Energy of product - energy of reactant
Change in energy = 20 - 40
Change in energy = -20 KJ
3. How do i know if the reaction is exothermic or endothermic?From the above calculation, we can see that the change in energy is negative (i.e -20 KJ).
Thus, we can conclude that the reaction is exothermic reaction.
4. How do i know which letter represents product?The letter which represents products given the energy diagram is letter B
5. How do i know which letter represents reactants?
The letter which represents reactants given the energy diagram is letter A
Learn more about activation energy:
https://brainly.com/question/29060218
#SPJ1
A research article indicates that researchers have used an isotope 3H to trace a certain metabolic process. From the symbol that is given, we know this is a hydrogen isotope with
A. three protons.
B. three neutrons.
C. three electrons.
D. one proton and two neutrons.
E. two protons and one neutron.
The answer is B. three neutrons. The symbol for the hydrogen isotope 3H is written as H-3, which means it has one proton and three particles in the nucleus (neutrons and/or protons). Since the atomic number of hydrogen is 1 (which corresponds to the number of protons in the nucleus), we know that this isotope has one proton. Therefore, the remaining three particles in the nucleus must be neutrons.
The neutron is composed of two down quarks, each with 1/3 elementary charge, and one up quark, with 2/3 elementary charge. The nucleus is bound together by the residual effect of the strong force, a fundamental interaction that governs the behaviour of the quarks that make up the individual protons and neutrons.
Subtract the atomic number from the atomic mass.
Since the vast majority of an atom's mass is found its protons and neutrons, subtracting the number of protons (i.e. the atomic number) from the atomic mass will give you the calculated number of neutrons in the atom.
to know more about three neutrons click this link -
brainly.com/question/1328543
#SPJ11
Galvanic anodes are generally used where
A) small amounts of current are required
B) larger amounts of current are required
C) soil resisivity is high
D) in large remote groundbeds
Galvanic anodes are generally used where A) small amounts of current are required.
Galvanic anodes are typically used for cathodic protection, which is a technique used to prevent corrosion of metal structures by making them the cathode in an electrochemical cell. Galvanic anodes work by sacrificing themselves, meaning that they are more easily corroded than the metal structure being protected. As a result, the galvanic anode will corrode and the metal structure will be protected from corrosion.
Galvanic anodes are typically used in situations where only small amounts of current are required, as they have a relatively low current output. This makes them ideal for protecting small metal structures such as pipelines, boats, and offshore platforms. In situations where larger amounts of current are required, impressed current systems are typically used instead.
Soil resistivity is also an important consideration when choosing a cathodic protection system. In general, higher soil resistivity will require a more powerful cathodic protection system in order to provide adequate protection. Galvanic anodes are generally not recommended for use in soils with high resistivity, as they may not be able to provide sufficient protection. In these situations, impressed current systems may be a better choice.
Finally, the use of galvanic anodes may not be practical in large remote ground beds. In these situations, impressed current systems are often used instead, as they are better able to provide the high levels of current required to protect large structures over long distances.
Know more about the wet-set bead.
https://brainly.com/question/31563784
#SPJ11
the equilibrium constant for the reaction of bromine with chlorine to form bromine monochloride is 58.0 at a certain temperature. br2(g) cl2(g) 2brcl(g) what is the equilibrium constant for the following reaction? brcl(g) 1/2 br2(g) 1/2 cl2(g) group of answer choices
The equilibrium constant for the reaction brcl(g) ⇌ 1/2 br2(g) + 1/2 cl2(g) is 232/[tex]x^{2}[/tex], where x is the concentration of BrCl at equilibrium.
The equilibrium constant for the reaction of bromine with chlorine to form bromine monochloride is 58.0 at a certain temperature, given by the equation [tex]br_{2}[/tex](g) + [tex]Cl_{2}[/tex](g) ⇌ 2brcl(g). To find the equilibrium constant for the reaction brcl(g) ⇌ 1/2 [tex]br_{2}[/tex](g) + 1/2 [tex]Cl_{2}[/tex]g), we can use the following equation:
K' = ([BrCl]/([[tex]br_{2}[/tex]]/2)([[tex]Cl_{2}[/tex]]/2))
where K' is the equilibrium constant for the second reaction, and [BrCl], [[tex]br_{2}[/tex]], and [Cl2] are the concentrations of the species at equilibrium. Using the equilibrium constant for the first reaction (K = 58.0) and the stoichiometry of the two reactions, we can write:
K = [tex][BrCl]^2[/tex]/([[tex]br_{2}[/tex]][[tex]Cl_{2}[/tex]])
Simplifying, we get:
K' = 4K/([[tex]br_{2}[/tex]][[tex]Cl_{2}[/tex]])
Substituting the value of K (58.0) and the appropriate concentrations at equilibrium, we get:
K' = 4(58.0)/([(1/2)x]([1/2]x)) = 232/[tex]x^{2}[/tex]
Learn more about equilibrium constant here:
https://brainly.com/question/15118952
#SPJ11
The complete question is :
the equilibrium constant for the reaction of bromine with chlorine to form bromine monochloride is 58.0 at a certain temperature. br2(g) cl2(g) 2brcl(g) what is the equilibrium constant for the following reaction? brcl(g) 1/2 br2(g) 1/2 cl2(g)
a different compound found in food, compound x, is known to decompose over time. to study the reaction a student monitors the molar concentration of compound x in a solution at constant temperature. after collecting and analyzing the data, the following linear graphs as created by plotting [x] versus time. the student proposes that the reaction is zero order with respect to compound x. do you agree or disagree? justify your answer using the data in the graph to the right.
Based on the given information and the graph provided, I agree with the student's proposal that the reaction is zero order with respect to compound x. This is because the graph shows a straight line with a negative slope, indicating that the rate of decomposition of compound x is constant and independent of the concentration of the compound.
In other words, the rate of reaction is not affected by the concentration of the compound, which is a characteristic of zero-order reactions.
Furthermore, the linear relationship between [x] and time also suggests that the reaction follows a first-order kinetic model. This means that the rate of reaction is proportional to the concentration of the compound, but since the graph shows a straight line, the rate must be independent of the concentration, indicating a zero-order reaction.
Additionally, the fact that the reaction occurs at a constant temperature suggests that the reaction is not affected by external factors such as temperature or pressure, which would also support the zero-order kinetics model.
Therefore, based on the evidence presented in the graph and the given information, it can be concluded that the reaction is zero order with respect to compound x.
for more such question on zero order reaction
https://brainly.com/question/21663229
#SPJ11
The diagram below shows a reaction profile for a chemical reaction.
(a) Label parts A-E of the reaction profile above.
(b) Explain the type of reaction the reaction profile represents.
The labelling can be done as C=reactant, E=energy is released and D=Product. The type of reaction the reaction profile represents is exothermic reaction.
Exothermic reactions are chemical naturally occurring and are distinguished by the discharge of energy within the shape of heat or light. One instance of this kind of reaction, when the release comes in the manner of both light and heat, is lighting a match.
The exothermic reaction results in the release of energy as opposed to an endothermic response, which absorbs energy. This energy frequently exceeds the sum of the energies of the reactants. The labelling can be done as C=reactant, E=energy is released and D=Product. The type of reaction the reaction profile represents is exothermic reaction.
To know more about Exothermic reaction, here:
https://brainly.com/question/10373907
#SPJ1
SRB (sulfate reducing bacteria)
A) descrease the corrosion of metal pipe in clay environments
B) decrease the corrosion in all environments
C) accelerate corrosion of metal pipe in clay environments
The SRB (sulfate-reducing bacteria) is a type of bacteria that can reduce sulfate to sulfide. These bacteria can have an impact on the corrosion of metal pipes in various environments. Among the given options C) Accelerate corrosion of metal pipe in clay environments.
The SRB can accelerate the corrosion of metal pipes in clay environments. In these environments, the bacteria produce sulfide, which reacts with the metal surface, forming metal sulfides. This process leads to a localized breakdown of the protective film on the metal surface, exposing the underlying metal to further corrosion. Clay environments provide a suitable habitat for SRB, as they offer the necessary nutrients and anaerobic conditions that these bacteria require to thrive. Consequently, the presence of SRB in clay environments can increase the rate of corrosion of metal pipes, leading to potential failure and the need for costly repairs or replacement.
learn more about corrosion here.
https://brainly.com/question/30531478
#SPJ11
The n=1 electron energy
level of a H atom has an
energy of -21.8 Ã10-19 J. What
is the energy of the n=5 level?
Which atomic model are you
using to solve this problem?
The energy of the n=5 level in a hydrogen atom can be calculated using the Rydberg formula, and is -2.42 × 10^-18 J. The problem is being solved using the Bohr model of the hydrogen atom, which assumes that electrons move in circular orbits around the nucleus.
Explanation: The Bohr model of the hydrogen atom assumes that the electron moves in circular orbits around the nucleus. The energy levels of the electron are quantized and can be calculated using the equation E = -13.6 eV/n^2, where n is the principal quantum number. To convert this to joules, we use the conversion factor
[tex]1 eV = 1.602 × 10^-19 J.[/tex]
Using the given energy of the n=1 level, we can calculate the energy of the electron in joules as E = -21.8 × 10^-19 J. To find the energy of the n=5 level, we can use the Rydberg formula, which gives the energy of any level in a hydrogen atom as E = -13.6 eV/n^2 × (1/n^2 - 1/1^2). Plugging in n=5, we get
[tex]E = -2.42 × 10^-18 J.[/tex]
Therefore, the energy of the n=5 level in a hydrogen atom is -2.42 × 10^-18 J.
Learn more about nucleus here:
https://brainly.com/question/17704494
#SPJ11
Draw the higher energy chair conformation of cis-1,3-dimethylcyclohexane
This is the higher energy chair conformation of cis-1,3-dimethyl cyclohexane.
H
|
H----C----H
| | |
H C----H
| |
H CH3
|
CH3
An energy chair is a representation of the conformational energy of a cyclohexane molecule. Cyclohexane is a six-carbon cyclic molecule with sp3 hybridized carbons and all of its carbon atoms are connected by single bonds. The energy chair is a 3D representation of cyclohexane in which the molecule is depicted as a chair-like structure.
The energy chair is used to show the different conformations of cyclohexane, which can interconvert through a process known as ring flipping. The chair conformation represents the lowest energy state of cyclohexane, while other conformations, such as the boat or twist-boat conformation, are higher in energy. The energy levels of the different conformations of cyclohexane are determined by the angle of the carbon-carbon bonds and the steric hindrance between the hydrogen atoms attached to the carbons. The chair conformation is the most stable because it minimizes steric hindrance and maximizes the overlap of orbitals between adjacent carbons.
To learn more about Energy chair visit here:
brainly.com/question/13479093
#SPJ4
For the reaction AB (g) â A (g) + B (g), rate = k[AB]2, k = 0.200 L/molâs, and [AB]0 = 1.50 M. What is [AB] after 10.0 s?
The main answer to the question is [AB] = 0.113 M. The concentration of AB after 10.0 s can be calculated using the integrated rate law for a second-order reaction.
The rate law for the given reaction is rate = k[AB]^2.
To determine the concentration of [AB] after a certain time, we can use the integrated rate law for a second-order reaction, which is:
1/[AB]t - 1/[AB]0 = kt
Where [AB]t is the concentration of AB at time t, [AB]0 is the initial concentration of AB, k is the rate constant, and t is the time elapsed.
Plugging in the given values, we get:
1/[AB]t - 1/1.50 = (0.200 L/mol*s)(10.0 s)
Solving for [AB]t, we get:
[AB]t = 0.113 M
Therefore, the concentration of AB after 10.0 s is 0.113 M.
Hence, The concentration of AB after 10.0 s can be calculated using the integrated rate law for a second-order reaction. Plugging in the given values, we get [AB]t = 0.113 M.
learn more about reaction click here:
https://brainly.com/question/11231920
#SPJ11
What class of chemicals is incompatible with hydrides, carbides and alkali metals?
Pyrophorics
Reducing agents
Bases
Water or aqueous solutions
Hydrides, carbides, and alkali metals are typically reactive reducing agents, which can donate electrons and undergo oxidation in a chemical reaction. Therefore the correct option is option B.
In a chemical reaction, oxidising agents are compounds that have a propensity to take electrons and go through reduction. Compatibility problems with oxidising agents can lead to fire, explosion, the production of poisonous fumes, or the emission of heat.
When exposed to air, pyrophorics spontaneously catch fire, and they frequently work as reducing agents as well. While reducing agents like hydrides, carbides, and alkali metals are frequently incompatible with oxidising agents, pyrophorics can also be incompatible with oxidising agents. These particular substances are specified in the question. Therefore the correct option is option B.
For such more question on reducing agents:
https://brainly.com/question/18370994
#SPJ11
Which kind of sampling system uses a pump to draw air over a sorbent material?
Active
Passive
Dynamic
Constant-pressure
The type of sampling system that uses a pump to draw air over a sorbent material is an active sampling system.
Active sampling systems use a pump to draw air over a sorbent material in order to collect a sample. The pump creates a vacuum to draw air from the environment and then passes it over a sorbent material such as activated charcoal or silica gel. The sorbent material collects particles, gases and vapors from the air, which can then be analyzed. This type of system is ideal for measuring short-term, intermittent exposure to pollutants and is often used to monitor workplace air quality.
To learn more about silica gel click here https://brainly.com/question/30009290
#SPJ11
igh levels of fructose-2,6-bp reciprocally regulate glycolysis and gluconeogenesis. fructose-2,6-bp inhibits flux through the glycolytic pathway by increasing the activity of phosphofructokinase-1 . flux through the gluconeogenic pathway is inhibited by fructose-2,6-bp, which decreases the activity of phosphofructokinase-1 .
Fructose-2,6-bisphosphate (Fru-2,6-BP) is an important regulator of glycolysis and gluconeogenesis in cells.
Fru-2,6-BP is a regulator of both glycolysis and gluconeogenesis through its effects on the activity of phosphofructokinase-1. By increasing the activity of phosphofructokinase-1, Fru-2,6-BP facilitates glycolysis and inhibits gluconeogenesis.
Conversely, when the level of Fru-2,6-BP is decreased, phosphofructokinase-1 activity is decreased, which results in increased gluconeogenesis and decreased glycolysis.
Thus, Fru-2,6-BP plays an important role in the regulation of glycolysis and gluconeogenesis and helps to maintain a balance between these two pathways.
In summary, high levels of Fru-2,6-BP can inhibit flux through the glycolytic pathway by increasing the activity of phosphofructokinase-1, while flux through the gluconeogenic pathway is inhibited by decreasing the activity of phosphofructokinase-1.
Know more about glycolysis here
https://brainly.com/question/14076989#
#SPJ11
the person or device that receives the wave or information
the term has to start with ob
The person or device that receives the wave or information (the term has to start with ob) is an "observer," as an observer is someone or something that is able to detect and take note of the information or waves that are being transmitted or propagated.
The role of an observer is important in many fields, such as science, engineering, and communication. In science, an observer is critical to conducting experiments and making observations that can help further our understanding of the natural world. In engineering, an observer might be used to detect and analyze vibrations or other physical phenomena that could be important for maintaining the safety and reliability of structures or machines (devices).
Learn more about the wave here.
https://brainly.com/question/13028933
#SPJ1
Categorize each process as endothermic or exothermic.
1. Endothermic processes:
Melting ice: When ice melts, it absorbs heat from its surroundings to convert from a solid to a liquid state.Photosynthesis: Plants use energy from the sun to convert carbon dioxide and water into glucose and oxygen.2. Exothermic processes:
Burning wood: When wood is burned, it releases heat and light into the surroundings as the energy stored in the chemical bonds is released.Respiration: When we breathe, we release energy in the form of heat as our bodies break down glucose and release carbon dioxide and water.Endothermic processes in chemistry are those that absorb heat from their surroundings, resulting in a decrease in temperature of the surroundings. These processes require energy input to occur and often involve the breaking of chemical bonds. Some examples of endothermic processes include melting of ice, evaporation of water, and the reaction between baking soda and vinegar. In an endothermic reaction, the energy required to break the bonds of the reactants is greater than the energy released when new bonds are formed in the products.
Therefore, the overall change in energy of the system is positive, meaning energy is absorbed from the surroundings. Endothermic reactions are important in many industrial processes, such as the production of ammonia and the cracking of petroleum. Additionally, endothermic processes play a crucial role in biological systems, such as photosynthesis, where plants convert light energy into chemical energy in an endothermic reaction.
To learn more about Endothermic processes visit here:
brainly.com/question/8897369
#SPJ4
One mole of a gas is compressed at a constant temperature of 400 k from p = 0. 1 bar to p = 10 bar. Find the change in gibbs free energy for this process
The change in Gibbs free energy for the given process is -15,269 J/mol.
The change in Gibbs free energy for a gas undergoing a reversible isothermal process can be expressed as:
ΔG = -RT ln (p₂/p₁)
where ΔG is the change in Gibbs free energy, R is the gas constant (8.314 J/mol*K), T is the temperature in Kelvin, and p₁ and p₂ are the initial and final pressures, respectively.
Substituting the given values, we have:
ΔG = -8.314 J/mol*K * 400 K * ln (10 bar / 0.1 bar)
ΔG = -8.314 J/mol*K * 400 K * ln (100)
ΔG = -8.314 J/mol*K * 400 K * 4.605
ΔG = -15,269 J/mol
Therefore, the change in Gibbs free energy for the given process is -15,269 J/mol.
Learn more about Gibbs free energy,
https://brainly.com/question/20358734
#SPJ4
Does any solid ag2cro4 from when 2. 7x10-5 g of agno3 is dissolved in 15. 0 ml of 4. 0x10-4 m k2cro4? (ksp of ag2cro4 2. 6 x 10-12)
The ion product is smaller than the solubility product. Therefore, no solid [tex]Ag_2Cr_O4[/tex] will form under these conditions, and all of the Ag+ and [tex]Cr_O4_2[/tex]- ions will remain in the solution.
moles of [tex]K_2Cr_O4[/tex]= (4.0x[tex]10^{-4}[/tex] M) x (0.0150 L) = 6.0x[tex]10^{-6}[/tex] mol
Since [tex]K_2Cr_O4[/tex] dissociates into two [tex]Cr_O4_2[/tex]- ions, we have:
[[tex]Cr_O4_2[/tex]-] = 2 x (6.0x[tex]10^{-6}[/tex] mol / 0.0150 L) = 8.0x[tex]10^{-4}[/tex] M
We can use the mass of [tex]AgN_O3[/tex] dissolved to calculate the moles of Ag+ ions:
moles of Ag+ = (2.7x[tex]10^{-5}[/tex] g / 169.87 g/mol) = 1.59x[tex]10^{-7}[/tex] mol
Now we can use these ion concentrations to calculate Q:
Q = [Ag+]²[[tex]Cr_O4_2[/tex]-] = (1.59x[tex]10^{-7}[/tex])² x (8.0x[tex]10^{-4}[/tex]) = 2.54x[tex]10^{-17}[/tex]
Solubility is a fundamental concept in chemistry that refers to the ability of a substance, called the solute, to dissolve in another substance, called the solvent, to form a homogeneous mixture, known as a solution. The solubility of a substance is usually expressed in terms of the maximum amount of solute that can dissolve in a given amount of solvent at a specific temperature and pressure, known as the solubility limit.
This limit is dependent on several factors, such as the nature of the solute and solvent, temperature, pressure, and the presence of other solutes. The solubility of a substance can have significant effects on various chemical reactions, physical properties, and biological processes. For example, the solubility of a gas in a liquid can affect the rate of chemical reactions, and the solubility of certain drugs in the bloodstream can affect their efficacy and toxicity.
To learn more about Solubility visit here:
brainly.com/question/28170449
#SPJ4
(subject is astronomy)
Part B When writing a science paper, you need several different sources of information. These sources can be books or websites. Remember to use the most credible sources. Some websites present things as evidence that may not have a scientific base. You must be able to identify reliable sites so the data in your presentation is credible. Sources that end in .edu (school and college websites) and .gov (government websites such as NASA.gov) are the most trustworthy. However, sometimes students, not scientists, write content for .edu websites. Because the content may not have been checked by scientists, read any .edu website carefully to determine whether it is reliable. Some .org and .com sites, such as Smithsonian.com, are also credible, but you have to read the content carefully to determine how legitimate it is. When you review a source, ask yourself these questions about the website’s author, content, and sources: Who authored the article? Is the author a scientific expert in stars and galaxies? What is the purpose of the article? Does the article state facts that can be proven by evidence, or is it made up of opinions? When was the article written? Do other credible sources support the statements in this article? Which scientific studies support the information in the article? Find two to three credible websites that you can use to find information for your paper. Write them down. They can be e-books, magazines, websites, and so on. Also, write down one to two sentences for each source explaining how the source will help you. Show how you will cite your sources at the end of your presentation using MLA (Modern Language Association) citation methods.
In the liberal arts and humanities, MLA (Modern Language Association) style is most frequently used to compose papers and cite sources.
Thus, Brief parenthetical citations in the text that are keyed to an alphabetical list of the works cited at the end of the work are a feature of the MLA style.
With the publication of the most recent edition, the MLA citation style has undergone substantial alterations.
Building trust in the knowledge and ideas we share with one another may be more crucial than ever, and for almost a century, this has been the guiding principle of MLA style, a set of writing and documentation.
Thus, In the liberal arts and humanities, MLA (Modern Language Association) style is most frequently used to compose papers and cite sources.
Learn more about MLA, refer to the link:
https://brainly.com/question/28567993
#SPJ1
a scientist has an unknown substance and has identified that it is a carbohydrate. he is choosing another property to determine whether the substance is a monosaccharide or a polysaccharide. which of the following properties will be most useful?
To determine whether the unknown carbohydrate substance is a monosaccharide or a polysaccharide, the most useful property for the scientist to investigate would be the molecular size and structure of the substance.
Monosaccharides are simple sugars with smaller molecular structures, while polysaccharides are larger and consist of multiple monosaccharide units bonded together.
The combination of two monosaccharides results in a disaccharide, which can be classified as a disaccharide.
These are created through the blending of sugars. Since water is released after the reaction is finished, the process is called hydrolysis.
The glycosidic linkage joins two monosachrrides together. Maltose, sucrose, and lactose are a few prevalent examples.
A big molecule's chemical link is broken by the water molecule in a hydrolysis reaction, resulting in the formation of smaller molecules.
Comparatively speaking, a disaccharide is a larger molecule than a monosaccharide. Or disaccharide is twice as big as monosaccharide in another world. In order to create two smaller monosaccharides, water and disaccharide must react during the hydrolysis process.
Learn more about monosaccharide here
https://brainly.com/question/780562
#SPJ11
Which domain is the most complex and why
All three domains of life (Bacteria, Archaea, and Eukarya) are complex in their own ways.
Bacteria and Archaea are both prokaryotic and lack a nucleus and other membrane-bound organelles, but they are still able to perform many complex functions.
Eukarya, on the other hand, are characterized by the presence of a nucleus and other membrane-bound organelles, which allows for even greater complexity and specialization of cell functions.
Thus, it is difficult to say which domain is the most complex as every domain has certain unique features.
Learn more about Bacteria, here:
https://brainly.com/question/8008968
#SPJ1
Corrosive chemicals usually involve what kind of reaction(s)?
- Acid-base
- Redox
- Acid base plus redox
- Acid base and/or redox
Corrosive chemical typically involve either acid-base reactions or redox reactions, and sometimes both. Therefore the correct option is option D.
A corrosive chemical can interact with a substance in an acid-base reaction by either giving or receiving protons, which can harm the substance.
For instance, powerful acids that react with the metal to produce hydrogen gas, such as hydrochloric acid, can corrode metals. Redox reactions include the transfer of electrons from or to a substance by corrosive chemicals, which causes the substance to degrade.
For instance, iron rusts because iron oxidises, which occurs when iron loses electrons to oxygen in the presence of water. Some caustic substances can also conduct redox as well as acid-base reactions. For instance, sulfuric acid can corrode metals by oxidising the metal and causing an acid-base interaction. Therefore the correct option is option D.
For such more question on chemical:
https://brainly.com/question/29886197
#SPJ11
Calculate the number of moles of carbon dioxide CO₂ produced by 3.5 Moles of Baking Soda NaHCO3.
1NaHCO3 + 1HC2H302—>1NaC2H3O2 + 1CO2 + 1H2O
Answer: The number of moles of carbon dioxide produced by 3.5 moles of baking soda is 3.5 moles.
Explanation:
PART OF WRITTEN EXAMINATION:
Oxidation
A) increases the negative charge of an atom or compound
B) decreases the positive charge of an atom or compound
C) is independent of reduction
D) occurs when the electrons are lost from an atom or compound
Oxidation D) occurs when the electrons are lost from an atom or compound. Oxidation refers to a chemical reaction where there is a transfer of electrons from one substance to another.
During oxidation, the substance that loses electrons is known as the reducing agent while the substance that gains electrons is known as the oxidizing agent. When an atom or compound loses electrons during oxidation, it becomes more positively charged, and this results in a decrease in its negative charge.
For example, when iron rusts, it undergoes oxidation as it loses electrons to oxygen. The iron atoms lose their electrons, and as a result, they become positively charged. This causes the iron compound to have a more positive charge than it did before the oxidation process.
In summary, oxidation occurs when electrons are lost from an atom or compound, which results in a decrease in the negative charge of the compound or atom.
Learn more about oxidizing agent here:
brainly.com/question/10547418
#SPJ11
g o analyze the data following the experiment, two excel plots will be made. the slope of the integrated rate law will be used to determine the
When analyzing the data from an experiment, it is common to use excel plots to visualize the results. In this case, two excel plots will be made. The first plot will be used to determine the integrated rate law, which is a mathematical equation that describes the rate of a reaction over time.
The second plot will be used to determine the slope of the integrated rate law.
The slope of the integrated rate law is an important parameter that can be used to determine the order of a reaction. The order of a reaction describes how the rate of the reaction changes as the concentration of reactants changes. For example, a first-order reaction is one in which the rate is directly proportional to the concentration of the reactant, while a second-order reaction is one in which the rate is proportional to the square of the concentration of the reactant.
To determine the slope of the integrated rate law, it is necessary to plot the natural logarithm of the concentration of the reactant versus time. The slope of this plot is equal to the negative of the rate constant for the reaction. By comparing the slope of the integrated rate law to the known values for the rate constant of a first-order or second-order reaction, it is possible to determine the order of the reaction.
In summary, analyzing the data from an experiment involves creating excel plots to visualize the results. The slope of the integrated rate law is an important parameter that can be used to determine the order of a reaction. This is done by plotting the natural logarithm of the concentration of the reactant versus time and comparing the slope to known values for the rate constant of a first-order or second-order reaction.
To know more about integrated rate law, refer to the link below:
https://brainly.com/question/8314253#
#SPJ11
The higher the concentration of
hydrogen ions
A) the lower the pH
B) the lower the oxygen
C) the higher the pH
D) the higher the oxygen
The higher the concentration of hydrogen ions A) the lower the pH. In a solution, the concentration of hydrogen ions (H+) determines its pH. The pH scale ranges from 0 to 14, with a pH of 7 being neutral.
A pH below 7 indicates an acidic solution, while a pH above 7 represents a basic or alkaline solution.
The relationship between pH and the concentration of hydrogen ions is inversely proportional, meaning that as the concentration of hydrogen ions increases, the pH value decreases. Consequently, a higher concentration of hydrogen ions results in a lower pH, making the solution more acidic.
It is important to note that the pH scale is logarithmic, meaning that each change of one unit in pH represents a tenfold change in the concentration of hydrogen ions. For example, a solution with a pH of 3 is ten times more acidic than a solution with a pH of 4 and a hundred times more acidic than a solution with a pH of 5.
Oxygen levels, on the other hand, are not directly related to the concentration of hydrogen ions or pH in this context. Therefore, options B and D are not accurate. Similarly, option C is not correct, as a higher concentration of hydrogen ions corresponds to a lower pH, not a higher one.
To learn more about hydrogen ions, refer:-
https://brainly.com/question/7641960
#SPJ11
A student dissolved only 40 grams of NaCI in 80 grams of water that is at 90°C. To make this a saturated solution, the student must add to the solution
1) 10 g of NaCI
3) 10 g of H20
2) 20 g of NaCI
4) 20 g of H20
Solubility is a measure of the maximum amount of a substance (solute) that can dissolve in a given amount of solvent at a specified temperature and pressure.
Given information,
Amount of known solute (NaCl) = 40 grams
Amount of known solvent = 80 grams
Let the amount of unknown solute be x
We know that,
Amount of known solute/Amount of known solvent = Amount of unknown solute/Amount of unknown solvent
40/80 = x/100
As solubility is expressed in 100 grams.
x = 40 × 100/80
x = 50 grams
Thus, the solubility of NaCl is 50/100 grams of water. The solution already contains 40 grams of NaCl. It requires only adding 10 grams of NaCl to make the solution saturated. Hence, option A is correct.
Learn more about solubility, here:
https://brainly.com/question/31493083
#SPJ1
in the reaction of nitrogen gas with oxygen gas to produce nitrogen oxide, what is the effect of adding more oxygen gas to the initial reaction mixture? the reaction is shown below. select one: a. the equilibrium shifts to produce more n2. b. the equilibrium shifts to produce more no. c. the equilibrium is not affected. d. extra catalyst is required to reach equilibrium. e. the temperature of the reaction mixture is raised.
The correct answer to the question is (b) the equilibrium shifts to produce more NO when more oxygen gas is added to the initial reaction mixture. No extra catalyst is required to reach equilibrium. The reaction of nitrogen gas with oxygen gas to produce nitrogen oxide is represented by the equation N2(g) + O2(g) ⇌ 2NO(g).
When more oxygen gas is added to the initial reaction mixture, it will cause the equilibrium to shift to produce more nitrogen oxide (NO). This is because the reaction is endothermic and therefore, an increase in the concentration of reactants (oxygen gas) will drive the reaction in the forward direction to form more product (nitrogen oxide).
According to Le Chatelier's principle, when a system at equilibrium is disturbed, it will try to counteract the disturbance to re-establish equilibrium. In this case, the addition of oxygen gas causes a disturbance, which the system counters by increasing the rate of the forward reaction, resulting in an increase in the concentration of nitrogen oxide (NO).
Therefore, the correct answer to the question is (b) the equilibrium shifts to produce more NO when more oxygen gas is added to the initial reaction mixture. No extra catalyst is required to reach equilibrium, and the temperature of the reaction mixture may or may not change depending on the specific conditions of the reaction.
for more such questions on equilibrium .
https://brainly.com/question/19340344
#SPJ11
Thermally-insulating gloves should be used when
- Nitrile or butyl gloves are not available
- When handling hot or cold objects
- A high degree of dexterity is needed
- "Double-gloving" is not possible
Thermally-insulating gloves should be used when handling hot or cold objects and when nitrile or butyl gloves are not available.
They are especially useful when a high degree of dexterity is needed and "double-gloving" is not possible. These gloves are designed to provide protection from extreme temperatures while also offering insulation to keep the hands warm or cool. They are a must-have for anyone working in environments with extreme temperatures, and can greatly reduce the risk of injury or discomfort. Latex gloves provide excellent grip and flexibility, making them ideal for tasks that require precision and dexterity. They are also breathable and provide some insulation from hot and cold temperatures.
To learn more about gloves click here https://brainly.com/question/30427786
#SPJ11