PART OF WRITTEN EXAMINATION:
Compared to an impressed current system, a galvanic anode system in soil has the following advantage:
A) No external power is required
B) current can easily be adjusted
C) are more suitable for high resistivity soil
D) has a high current capacity

A catalyst will have no effect on the change in enthalpy of a reaction.

A catalyst will have no effect on the change in enthalpy of a reaction. The enthalpy change (ΔH) of a reaction is determined by the difference between the energy of the reactants and the energy of the products. A catalyst can increase the rate of the reaction by providing an alternate reaction pathway with lower activation energy, but it does not change the energy difference between the reactants and products. Therefore, the change in enthalpy (ΔH) remains the same with or without the presence of a catalyst.

Learn more about enthalpy here:

https://brainly.com/question/16720480

#SPJ11

The order of compounds from the start of glycolysis to the end of glycolysis is glucose, glucose-6-phosphate, 1,3-BPG, G3P, and pyruvate.

For more such question on glycolysis

https://brainly.com/question/15413086

#SPJ11

After a recrystallization, a pure substance will ideally appear as a network of large crystals. If this is not the case, it may be worthwhile to reheat the flask and allow the contents to cool more slowly.

The new, stress-free grains form at the grain borders and inside the old, deformed grains as the temperature rises. This takes the place of the deformed grains that strain hardening created. The metal's mechanical characteristics return to their initial, more ductile state, which is also weaker.

The temperature at which the process starts is variable and largely determined by:

length of time

composition of steel

volume of chilly work

The recrystallization temperature is lowered, new grain sizes are reduced, and strain hardening increases. Recrystallization requires between two and twenty percent cold work at a minimum.
After a recrystallization, a pure substance will ideally appear as a network of large crystals. If this is not the case, it may be worthwhile to reheat the flask and allow the contents to cool more slowly. Your answer: large crystals, slowly.

learn more about  recrystallization

https://brainly.com/question/29215760

#SPJ11

1) The activation energy is 80 kJ

2) I represents the activation energy

3) The change in energy is 20 kJ

4) The reaction is endothermic

5) After the catalyst was added the activation energy decreased to 50 kJ

6) The activation energy after the catalyst was added is II

The very minimum of energy needed for a chemical reaction to take place is called activation energy. In order for reactant molecules to transform into products, the energy barrier must be broken.

Chemistry places a lot of emphasis on the idea of activation energy since it affects how quickly a reaction proceeds. The reaction moves more slowly the larger the activation energy.

Learn more about activation energy:https://brainly.com/question/28384644

#SPJ1

The reaction consumes 4.032 g of H₂ and 31.998 g of O₂.

When a spark is passed through a mixture of 1.00 g of H₂ and O₂, water is formed. The chemical equation for the reaction is:

2H₂ + O₂ → 2H₂O

According to the stoichiometry of the equation, 2 moles of H₂ react with 1 mole of O₂ to produce 2 moles of H₂O. The molar mass of H₂O is 18.015 g/mol.

1 mole of H₂ has a mass of 2.016 g, so 1.00 g of H₂ is equivalent to 0.496 mol.

1 mole of O₂ has a mass of 31.998 g, so the amount of O₂ present can be calculated as:

0.496 mol H₂ x (1 mol O₂ / 2 mol H₂) = 0.248 mol O₂

So, the total mass of H₂O formed can be calculated as:

2 mol H₂O x 18.015 g/mol = 36.03 g

This means that 36.03 g of water is formed in the reaction. The masses of H₂ and O₂ consumed can be calculated using their respective stoichiometric coefficients:

2 mol H₂ x 2.016 g/mol = 4.032 g H₂

1 mol O₂ x 31.998 g/mol = 31.998 g O₂

As a result, the reaction uses 4.032 g of H₂ and 31.998 g of O₂.

To know more about the Mixture, here

https://brainly.com/question/9441392

#SPJ1

The given statement " In living systems, ionic compounds generally exist as ionic crystals" is true because ionic compounds can exist as dissolved ions in solution, such as in the case of electrolytes in the body.

Ionic chemicals commonly exist in living systems as solid ionic crystals rather than as individual molecules.

For instance, rather than existing as separate, discrete molecules, the sodium and chloride ions in table salt (NaCl) create a crystal lattice structure.

The presence of ionic connections in numerous biological components, including DNA and proteins, helps to stabilise their structures.

Ionic compounds, however, can occasionally exist as dissolved ions in solutions, as is the case with the body's electrolytes.

For such more question on electrolytes:

https://brainly.com/question/1581652

#SPJ11

If we say 2p6, the 2 corresponds to the energy level, and the 6 corresponds to the number of electrons in those orbitals.

In the electron configuration notation, the term "2p6" describes the arrangement of electrons in an atom's valence shell. The "2" in this term refers to the principal quantum number, which indicates the energy level of the valence shell. The "p" refers to the type of orbital, specifically the "p" orbital. The "6" indicates the total number of electrons present in that set of "p" orbitals. Therefore, the term "2p6" tells us that the valence shell of the atom has two energy levels and contains six electrons in the "p" orbitals. Overall, electron configuration notation helps us understand the electronic structure of atoms and their chemical properties.

Learn more about valence shell here:

https://brainly.com/question/12166861

#SPJ11

When OSHA uses a TLV (Threshold Limit Value) in regulations, the TLV becomes a mandatory PEL (Permissible Exposure Limit). This means that employers must ensure workers' exposure to the hazardous substance does not exceed the established PEL, which is based on the TLV. OSHA enforces these PELs to protect workers from potential health hazards in the workplace.

When OSHA uses a TLV in regulations, the TLV becomes a non-mandatory recommendation for occupational exposure limits. OSHA has established its own Permissible Exposure Limits (PELs) which are legally enforceable and mandatory. While OSHA may consider TLVs when establishing or revising PELs, the TLV does not automatically become a PEL. OSHA may also use other sources of information to establish or revise PELs. Additionally, OSHA does not require that TLVs be updated annually, although some organizations that establish TLVs may choose to update them on a regular basis.

Learn more about Threshold Limit Value here: brainly.com/question/30563012

#SPJ11

The class of reaction for the reaction of piperylene with sulfonic acid  to form piperylene sulfone is a chemical addition reaction.

Piperylene (also known as 1,3-pentadiene) is an unsaturated hydrocarbon with two carbon-carbon double bonds. In the reaction with sulfonic acid the double bond of piperylene adds to the sulfur atom of sulfonic acid , forming a sulfonic acid intermediate. This intermediate then reacts with oxygen to form the final product, piperylene sulfone.

The reaction is reversible, meaning that piperylene sulfone can also react with sulfonic acid  to reform the intermediate sulfonic acid and piperylene. Therefore, this reaction can also be classified as an equilibrium reaction.

Learn more about   sulfone

https://brainly.com/question/30882736

#SPJ4

The criterion of -850mV is referenced to the silver-silver chloride electrode (Ag/AgCl).  Therefore the correct option is option C.

In electrochemistry, the silver-silver chloride electrode is frequently used as a standard reference electrode in studies of corrosion and other electrochemical reactions.

The potential of the silver-silver chloride electrode, which is defined at 0.1976 V vs the standard hydrogen electrode (SHE) at 25°C, is stable and repeatable.

In investigations on corrosion, the corrosion potential—the potential at which the rate of corrosion is minimized—is frequently determined using the criterion of -850 mV.

The corrosion potential is normally evaluated in relation to the silver-silver chloride electrode, and a corrosion study's standard criterion is typically a potential of -850 mV versus Ag/AgCl. Therefore the correct option is option C.

For such more question on electrode:

https://brainly.com/question/28302450

#SPJ11

The treatment of acetylene with a suitable base, such as lithium hydroxide or lithium amide, results in the formation of lithium acetylide. This compound is used as a reagent in organic synthesis in the formation of carbon-carbon bonds.

In the partial synthesis of the antitumor natural product ( ⁻) acutiphycin, lithium acetylide was utilized as a key reagent. The first step in this process involved the formation of lithium acetylide through the treatment of acetylene with a suitable base.
The structure of lithium acetylide can be drawn as follows:
Li⁺
|
C≡C⁻

Carbon-carbon double bonds have more energy than carbon-carbon single bonds, which is a given.

Since bond energy and bond strength are directly inversely related, double bonds will be stronger than single bonds and triple bonds will be the strongest of all bonds.

The bond length of a carbon-carbon bond and bond energy are inversely related. This implies that the bond will be shorter and vice versa depending on the amount of bond energy.

Learn more about carbon-carbon bond  here

https://brainly.com/question/12156863

#SPJ11

Microscale reactions involve reaction mixtures with volumes significantly less than 5 mL (usually in the microliter range).

Some benefits of microscale chemistry include option (c) and (d) which can be explained as :

c. Reduced chemical waste: Microscale reactions use smaller amounts of reagents, which reduces the amount of chemical waste produced.

d. Faster work-ups: Microscale reactions typically require less time for mixing and reaction completion, which can lead to faster work-ups.

However, option a is not a benefit of microscale chemistry because smaller reaction volumes generally lead to smaller amounts of product. Option b is also not a benefit of microscale chemistry as the number of pieces of glassware used is not directly related to the reaction scale.

To know more about the microscale reactions refer here :

https://brainly.com/question/28476291#

#SPJ11

The chemical equation of the overall reaction is [tex]NO_{2}Cl[/tex] (g) + Cl (g) → 2[tex]NO_{2}[/tex] (g) + [tex]Cl_{2}[/tex] (g). Also, Cl (g) as an intermediate in this mechanism, its chemical formula is simply Cl.

To know about the decomposition of nitryl chloride, we have to

1. To write the chemical equation of the overall reaction, we must first add the two given reactions:

Reaction (1):  [tex]NO_{2}Cl[/tex]  (g) → 2[tex]NO_{2}[/tex] (g) + Cl (g)
Reaction (2): Cl (g) +  [tex]NO_{2}Cl[/tex]  (g) → 2[tex]NO_{2}[/tex] (g) + [tex]Cl_{2}[/tex] (g)

When we add these two reactions together, we get:
[tex]NO_{2}Cl[/tex] (g) + Cl (g) → 2[tex]NO_{2}[/tex] (g) + [tex]Cl_{2}[/tex] (g)

This is the chemical equation of the overall reaction.

2. To identify any intermediates in this mechanism, we look for species that are produced in one reaction and consumed in another.

In this case, Cl (g) is produced in Reaction (1) and then consumed in Reaction (2). Therefore, Cl (g) is an intermediate in this mechanism.

3. As we identified Cl (g) as an intermediate in this mechanism, its chemical formula is simply Cl.

To know more about Decomposition of Nitryl Chloride:

https://brainly.com/question/14207841

#SPJ11

Toxic gases and radioactive gases are the two categories of materials that require special engineering for chemical hoods.

The design and construction of the hoods must take into consideration the potential hazards of these materials to ensure the safety of workers and prevent any release of harmful substances into the surrounding environment. Chemical hoods are a critical component of laboratory safety and must be carefully designed and maintained to protect workers and the surrounding area from exposure to hazardous materials. Special engineering is needed to ensure that the hood is properly vented and that any radiation that is emitted is contained and not released into the environment.

To learn more about hoods click here https://brainly.com/question/30450882

#SPJ11

Answer:

The balanced chemical equation for the reaction of Na with H₂O is:

2Na + 2H₂O → 2NaOH + H₂

According to the given data, 4.00 x 10^2 mL of H₂ gas is produced at STP. We can use the ideal gas law to determine the number of moles of H₂ gas produced: PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

At STP, P = 1 atm and T = 273 K, so:

V = nRT/P = (1 mol)(0.0821 L atm/mol K)(273 K)/(1 atm) = 22.4 L

Therefore, 4.00 x 10^2 mL of H₂ gas is equal to 0.4 L.

We can use the stoichiometry of the balanced chemical equation to relate the moles of H₂ gas produced to the moles of Na required:

2 mol Na : 1 mol H₂

x mol Na : 0.5 mol H₂

x = 0.25 mol Na

The molar mass of Na is 22.99 g/mol, so:

0.25 mol Na x 22.99 g/mol = 5.75 g Na

Therefore, 5.75 grams of Na are needed to liberate 4.00 x 10^2 mL of H₂ gas at STP

The correct options based on the information will be:

Enhanced boiling points can be attributed to heightened intermolecular forces since more energy is demanded to break the bonds between molecules in a liquid state and transform them into a gaseous phase.

The presence of strong intermolecular force characterizes Bromine. Fluorine, on the other hand, serves as a gas when under standard temperature and pressure conditions because it experiences weak intermolecular forces consequent to its nonpolar nature and limited size.

Due to the involvement of polarizable electrons and larger proportions, Bromine remains in its liquid state while kept at standard temperature and pressure, attesting thereby to a stronger intermolecular bond compared with Fluorine's relatively weaker bonding property.

Learn more about bond on

https://brainly.com/question/25965295

#SPJ1

Among the given functional groups of an amino acid, the "coh with an o atom double-bonded to the carbon.

There is an open bond at the carbon" group would be in the ionized state at high pH. This functional group represents the carboxyl group (-COOH) of an amino acid, which acts as an acid and donates a proton to form a negatively charged carboxylate ion (-[tex]COO^-[/tex]) at high pH.

The other functional group, "[tex]ch2oh[/tex] with an open bond at the carbon," represents the hydroxyl group (-OH) of an amino acid, which does not undergo ionization at high pH. The remaining functional groups are not present in amino acids and do not undergo ionization under physiological conditions.

To know more about functional groups

https://brainly.com/question/696051

#SPJ4

Answer:

Pascal (1 N/m²) (Pa) 101,325 Pa = 1 atm.

Pounds per square inch (psi) 14.7 psi = 1 atm.

Torr (1 mmHg) 760 torr = 1 atm.

Inches of Mercury (in Hg) 29.92 in Hg = 1 atm.

Atmosphere (atm) 1 atm = 1 atm.

Hope this helps :)

Pls brainliest...

The resulting pressure at 0°C is approximately 499.3 mm Hg.

To solve this problem, we can use the combined gas law equation, which relates the pressure, volume, and temperature of a gas:

(P1 × V1) / T1 = (P2 × V2) / T2

Where:

P1 = Initial pressure

V1 = Initial volume (assumed constant in this case)

T1 = Initial temperature

P2 = Final pressure (what we're trying to find)

V2 = Same volume as V1 (assumed constant in this case)

T2 = Final temperature

We can plug in the given values:

P1 = 545.0 mm Hg

V1 = constant

T1 = 24.0°C + 273.15 = 297.15 K (converted to Kelvin)

P2 = unknown

V2 = constant

T2 = 0°C + 273.15 = 273.15 K (converted to Kelvin)

Now we can solve for P2:

(P1 × V1) / T1 = (P2 × V2) / T2

P2 = (P1 × V1 × T2) / (V2 × T1)

Since V1 and V2 are constant (the volume is assumed to stay the same), we can simplify the equation:

P2 = (P1 × T2) / T1

Plugging in the values:

P2 = (545.0 mm Hg × 273.15 K) / 297.15 K

P2 = 499.3 mm Hg (rounded to 3 significant figures)

Therefore, the resulting pressure at 0°C is approximately 499.3 mm Hg.

Learn more about  resulting pressure

https://brainly.com/question/28588069

#SPJ4

The monatomic ion with a charge of 1+ and the electron configuration of [Kr]4d105s2 is the ion of silver, Ag+. There is one unpaired electron in the ground state of this ion.

The electron configuration [Kr]4d105s2 corresponds to the neutral atom of silver (Ag). When silver loses one electron to form a 1+ ion, the electron is removed from the 5s orbital, leaving the ion with the electron configuration [Kr]4d105s1. The 4d and 5s orbitals are close in energy, so there is a possibility for one of the unpaired electrons in the 4d orbital to be promoted to the 5s orbital, resulting in a fully filled 4d subshell and one unpaired electron in the 5s orbital. In this case, since only one electron is removed from the neutral atom, there will be one unpaired electron in the ground state of the Ag+ ion.

Learn more about ion here:

https://brainly.com/question/14982375

#SPJ11

0.32mm is the vertical length between 1 mL divisions on the graduated cylinder. The mass of the graduated cylinder is 0.070g.

Inner Diameter = 23 mm

Outer Diameter= 25 mm

Density = 2. 23 [tex]g/cm3[/tex]

Volume =  100 mL

The volume of a cylinder is calculated by:

v = 2 * (π) * r * r * h

Here radius r is the unknown term. To calculate the radius of the cylinder,

r = (Outer Diameter - Inner Diameter) /2

r = (25 mm - 23 mm)/2

r = 1 mm

Calculating the height of the cylinder,

h = 100 mL / π*r*r

h  = 100 mL / π*1

h = 100 / π mm

height  = 31.8 mm x 100 = 0.32mm

To calculate the mass of the cylinder

m = ρV

V = π * r* r* h

V = π*(1 mm)*(100 mm) / 1000

V= 0.0314 [tex]cm^3[/tex]

m = ρV = 2.23 [tex]g/cm^3[/tex] × 0.0314 [tex]cm^3[/tex]

m = 0.070 g

Therefore, we can conclude that the mass of the graduated cylinder is 0.070g.

To learn more about Cylinder

https://brainly.com/question/18948497

#SPJ4

Approximately 11.8 grams of P₂O₅ will be produced when 17.0 g of PH₃ is mixed with 16.0 g of O₂ in the following reaction.

In the given reaction, PH₃ reacts with O₂ to form P₂O₅. To determine the amount of P₂O₅ produced, we need to use stoichiometry. First, we should identify the balanced chemical equation for this reaction:

4PH₃ + 6O₂ → P₂O₅ + 6H₂O

Next, we should convert the given masses of reactants (PH₃ and O₂) into moles using their respective molar masses:

For PH₃: 1 mole = (1P + 3H) = (1x31.0 + 3x1.0) = 34.0 g/mol
17.0 g PH₃ × (1 mol PH₃ / 34.0 g PH₃) ≈ 0.5 mol PH₃

For O₂: 1 mole = (2O) = (2x16.0) = 32.0 g/mol
16.0 g O₂ × (1 mol O₂ / 32.0 g O₂) = 0.5 mol O₂

Now, we'll use the stoichiometry from the balanced equation to find the limiting reactant, which determines the amount of P₂O₅ produced:

For PH₃: 0.5 mol PH₃ × (1 mol P₂O₅ / 4 mol PH₃) = 0.125 mol P₂O₅
For O₂: 0.5 mol O₂ × (1 mol P₂O₅ / 6 mol O₂) ≈ 0.083 mol P₂O₅

Since the O₂ reaction yields a smaller amount of P₂O₅, O₂ is the limiting reactant. Finally, we can convert the moles of P₂O₅ produced into grams using its molar mass:

For P₂O₅: 1 mole = (2P + 5O) = (2x31.0 + 5x16.0) = 142.0 g/mol
0.083 mol P₂O₅ × (142.0 g P₂O₅ / 1 mol P₂O₅) ≈ 11.8 g P₂O₅

So, approximately 11.8 grams of P₂O₅ will be produced in this reaction.

To know more about stoichiometry, refer to the link below:

https://brainly.com/question/28780091#

#SPJ11

The chemical equation that corresponds to the first ionization energy (IE) of the chlorine atom is option A, which is Cl(g) + e- → Cl+(g).

Ionization energy is the energy required to remove an electron from an atom or ion in the gaseous state. The first ionization energy of chlorine represents the energy required to remove one electron from a chlorine atom in the gas phase to form a positively charged ion (Cl+). Among the given options, only option A represents this process. In this equation, Cl(g) represents a chlorine atom in the gas phase, e- represents an electron, and Cl+(g) represents a positively charged ion of chlorine in the gas phase. Therefore, the correct answer is option A.

learn more about ionization energy

https://brainly.com/question/20658080

#SPJ11

Monoatomic ions, also known as monoatomic species, are ions that consist of only one atom.

The oxidation number for monoatomic ions is equal to the charge of the ion itself. For example, the oxidation number of the monatomic ion Na+ is +1, while the oxidation number of the monatomic ion Cl- is -1. It is important to note that the oxidation number for monatomic ions is always a whole number, since the ion itself consists of only one atom. Monatomic ions are single atoms with a charge, either positive or negative. Positive ions (cations) have a net positive charge and negative ions (anions) have a net negative charge.

To learn more about oxidation number click here https://brainly.com/question/29257381

#SPJ11

The Gibbs energy change is a better parameter which is used to determine the spontaneity or feasibility of a process. If the value of Gibbs free energy change is negative, then the process is spontaneous.

The maximum amount of energy available to the system that can be converted into useful work during a process is called the Gibbs energy. It is denoted by G.

The equation connecting equilibrium constant and G is:

ΔG° = -RT lnK

-8.314 × 298 × ln 4.6 × 10⁻² = 7.62 kJ

E°cell = 0.0592/n log K

0.0592 / 2 log 4.6 × 10⁻² = -0.022 V

To know more about Gibbs free energy, visit;

https://brainly.com/question/9179942

#SPJ1

The first law of thermodynamics, also known as the law of conservation of energy, states that energy cannot be created or destroyed, only transferred or converted from one form to another. The second law of thermodynamics states that the entropy (or disorder) of a closed system will tend to increase over time.

The first law of thermodynamics, sometimes referred to as the law of conservation of energy, holds that energy can only be transferred or changed from one form to another and cannot be created or destroyed.

The entropy (or disorder) of a closed system will often tend to rise with time, according to the second law of thermodynamics.

These rules significantly affect both chemical processes and living things. The first law of thermodynamics states that the system's total energy must not change throughout chemical processes and that any energy changes must be counterbalanced by oppositely polarised energy changes elsewhere in the system.

Contrarily, chemical reactions will tend to move in a manner that increases entropy, or disorder, according to the second law of thermodynamics.

For such more question on thermodynamics:

https://brainly.com/question/13059309

#SPJ11

The fraction of benzoic acid that is in the dissociated form in the solution is 0.81%, or 0.0081 as a decimal.

To calculate the fraction of benzoic acid that is in the dissociated form in an aqueous solution, we need to first write the equilibrium expression for the dissociation of benzoic acid:

C₆H₅COOH (aq) + H₂O (l) ⇌ C₆H₅COO- (aq) + H₃O⁺ (aq)

The equilibrium constant expression for this reaction is:

K = [C₆H₅COO⁻][H₃O⁺] / [C₆H₅COOH]

where [C₆H₅COO⁻], [H₃O⁺], and [C₆H₅COOH] represent the concentrations (in mol/L) of the benzoate ion, hydronium ion, and undissociated benzoic acid, respectively.

The value of the equilibrium constant (K) for the dissociation of benzoic acid is 6.5 × 10⁻⁵ at 25°C.

To calculate the fraction of benzoic acid that is in the dissociated form, we can use the following equation:

α = [C₆H₅COO⁻] / [C₆H₅COOH] × 100%

where α represents the fraction of benzoic acid that is in the dissociated form, expressed as a percentage.

At equilibrium, the concentrations of the benzoate ion and hydronium ion will be equal, since the reaction is a 1:1 reaction. Therefore, we can substitute [C₆H₅COO⁻] = [H₃O⁺] into the equilibrium constant expression and rearrange to solve for [H₃O⁺]:

K = [C₆H₅COO⁻][H₃O⁺] / [C₆H₅COOH]

6.5 × 10⁻⁵ = [H₃O⁺]² / [C₆H₅COOH]

[H₃O⁺]] = √(6.5 × 10⁻⁵ × [C₆H₅COOH])

Now, we can substitute this value of [H₃O⁺] into the equation for α and simplify:

α = [C6H5COO-] / [C₆H₅COOH] × 100%

α = (√(6.5 × 10⁻⁵ × [C₆H₅COOH)) / [C₆H₅COOH] × 100%

α = 0.81%

Therefore, by calculating we can say that the fraction of benzoic acid that is in the dissociated form in the solution is 0.81%, or 0.0081 as a decimal.

To know more about the benzoic acid refer here :

https://brainly.com/question/24052816#

#SPJ11

There are 0.45 parts of sodium chloride in 100 parts of the 0.45% solution.

When we talk about a solution, we refer to a homogeneous mixture of two or more substances. The substance that dissolves in the solution is called the solute, while the substance in which the solute dissolves is called the solvent.
In this case, the solute is sodium chloride, which is a common salt, and the solvent is water. Sodium chloride 0.45% refers to the concentration of the salt in the solution. It means that there are 0.45 grams of sodium chloride per 100 milliliters of solution.
When we say "parts," we can refer to any unit of measurement, such as grams or milliliters. Therefore, we can say that there are 0.45 parts of sodium chloride in 100 parts of solution. This means that in a liter of solution (1000 milliliters), there are 4.5 grams of sodium chloride.
In conclusion, the answer to the question is 0.45 parts of sodium chloride in 100 parts of solution. This concentration is commonly used in medical applications, such as intravenous fluids, to replace lost fluids and electrolytes in the body.

learn more about sodium chloride Refer: https://brainly.com/question/19371678

#SPJ11

The order in which the anions will be precipitated when soluble Pb2+ is added to a solution will depend on their respective solubility product constants (Ksp).

An anion with a lower Ksp value will precipitate first, followed by the anion with the next lowest Ksp value and so on. Therefore, without knowing the specific anions present in the solution and their respective Ksp values, it is impossible to determine the exact order in which they will be precipitated.

Solubility is a term used in chemistry to describe a material's capacity to mix with another substance, the solvent. The opposing property is called insolubility, or the solute's inability to produce such a solution.

The term "solubility" is used to describe the greatest quantity of a chemical that may dissolve in a given amount of solvent at a particular temperature, using the chemical AgCl (silver chloride) as an example. Due to its limited solubility in water, silver chloride only partially dissolves to form a saturated solution. On the other hand, molar solubility is the quantity of AgCl that may dissolve in a litre of solvent to form a saturated solution.

Learn more about Ksp here

https://brainly.com/question/31384470

#SPJ11

Answer:
A Compound

Explanation:

got it right