Phosphorus-32 has a half-life of 14.0 daysdays. starting with 2.00 gg of 32p32p, how many grams will remain after 112 daysdays pearson?

Taking into account the definition of density, the density of mercury is 15.3 g/mL.

Density is defined as the property that matter has to compress into a given space and it allows us to measure the amount of mass in a certain volume of a substance.

The expression for the calculation of density is:

density= mass÷ volume

It can be deduced that density is inversely proportional to volume: the smaller the volume occupied by a given mass, the higher the density.

In this case, you know that:

Replacing in the definition of density:

density= 306 g÷ 20 mL

Solving:

density= 15.3 g/mL

In summary, the density of mercury is 15.3 g/mL.

Learn more about density:

brainly.com/question/952755

brainly.com/question/1462554

#SPJ1

The pH of a solution prepared by diluting 3.0 mL of 2.5 M HCl to a final volume of 100 mL with H₂O is 1.12.

Given data :

Original concentration of HCl before dilution (C₁) = 2.5 M

Volume of HCl to be diluted (V₁) = 3.0 mL

Final volume of HCl after diluting (V₂) = 100 mL

Final concentration of HCl after dilution (C₂) = ?

To Calculate the final concentration of solution, equation used is -

                               C₁.V₁ = C₂.V₂

Putting values in equation,

2.5 M x 3.0 mL = C₂ x 100 mL

C₂ = 2.5 M x 3.0 mL

             100 mL

C₂ = 0.075 M

When HCl is diluted with H₂O, it dissociates. The chemical equation of dissociation reaction of HCl is -

                       HCl(aq) ⇄ H⁺(aq) + Cl⁻(aq)

Concentration of HCl = concentration of H⁺ = 0.075 M

Using equation of pH,

                       pH = -log[H⁺]

pH = -log[0.075]

pH = 1.12

To learn more about pH and diluted solution,

brainly.com/question/9965274

#SPJ4

By ideal gas approximation, the temperature of methane gas is 361.01 K.

We need to know about the ideal gas theory to solve this problem. The ideal gas is assumed that there is no interaction between particles in a gas. It can be determined by the equation

P . V = n . R . T

where P is pressure, V is volume, n is the number of moles gas, R is the ideal gas constant (8.31 J/mol.K) and T is temperature.

From the question above, we know that

V = 20 L = 0.02 m³

P = 30 x 10⁵ Pa

n = 20 moles

By substituting the following parameters, we get

P . V = n . R . T

30 x 10⁵ . 0.02 = 20 . 8.31 . T

166.2T = 6 x 10⁴

T = 361.01 K

Find more on ideal gas at: https://brainly.com/question/25290815

#SPJ4

The balanced equation is:

2Cr^+3(aq) +7H2O(l) --> Cr2O7^2-(aq) + 14H^+(aq)

What is balanced equation?

A chemical equation is a symbol- and formula-based symbolic representation of a chemical reaction, with the reactant entities presented on the left side and the product entities on the right.

A balanced equation is one for a chemical reaction in which the overall charge and the number of atoms for each component are the same for both the reactants and the products. In other words, the mass and charge of both sides of the reaction are equal.

To learn more about balanced equation click the given link

https://brainly.com/question/26227625

#SPJ4

Answer:

Because they are corrosive. Acids are extremely corrosive to all body tissue, especially eyes and skin. Due to this powerful corrosiveness, acids are highly toxic.

Explanation:

A weak acid ha has a ph of 5.0. if 1.0 mol of this acid and 0.1 mol of naoh were dissolved in one liter of wat,er The weak acid is partly neutralised by the alkali: HA(aq)+NaOH(aq)→NaA(aq)+H2O(l).

Chemistry uses a pH scale to categorize an aqueous solution's acidity or basicity. The term pH originally meant "potential of hydrogen." In comparison to basic or alkaline solutions (solutions with higher H+ ion concentrations), acidic solutions have lower pH values measured.

The p Hscale is logarithmic and inversely proportional to the amount of hydrogen ions present in the solution.

M is equal to mol dm3. At a temperature of 25 °C (77 °F), basic solutions are defined as those with a pH greater than 7, and acidic solutions as those with a pH lower than 7. Solutions having a pH of 7 are regarded as neutral at this temperature (e.g. pure water). Temperature affects the pH's neutral value, which drops to below 7 if the temperature exceeds 25 °C.

To learn more about ph from the given link:

https://brainly.com/question/12609985

#SPJ4

Thermoplastics are those types of plastics that could be used several times because they could be melted and recycled.

A plastic is a material that is produced from monomer materials. In effect, plastics are polymers. The monomeric units that compose plastics could be made from natural or synthetic sources. There are two types of plastics;

Thermoplastics

Thermosets

The thermoplastics are those types of plastics that could be used several times because they could be melted and recycled. As such, there is a lot of research into the use of thermoplastics.

Learn more about thermoplastics:https://brainly.com/question/13100040

#SPJ4

Frequency of light = 0.705 x 10^16  per second.

Frequency: It is the quantity of waves passing a particular area in a predetermined period of time. Unit of frequency is second ^-1.

Wavelength: A wave's wavelength is the separation between its two subsequent crests or troughs. It is calculated using the wave direction. Unit of wavelength is meters.

Speed of light: the rate at which light waves move through various substances. In particular, it has now been determined that the speed of light in a vacuum is exactly 299,792,458 meters per second.

Inverse correlation exists between frequency and wavelength.

f ∝ 1/ λ

∴f = c /λ

where,

c is the speed of light (3 x 108 m/s), and f represents frequency.

λ is wavelength

∴ f = 3 x 10^8 / 4.25 x 10^-8

  f = 0.705 x 10^16  /s

Hence, frequency of the light wave will be 0.705 x  10^16  /s

To learn more about frequency refer- https://brainly.com/question/254161

#SPJ9

The concentration of a was 0.65 m at 33 s. the initial concentration of a was ________ m.

What is the concentration of a solution?

The quantity of solute in a solvent is used to define the concentration of a solution in chemistry. A solution is said to have more solute when it is a concentrated solution, and it contains more solvent when it is a dilute solution. The amount of solute that has dissolved in a specific volume of solvent or solution is measured as solution concentration. The term "concentrated" refers to a solution that has a significant amount of dissolved solute.

The following reaction has a second order in [A] and a rate constant of 0.025 M-1 s-1:

A→B

Thus the concentration is 1.4m.

To learn more about concentration of a solution from the given link below,

https://brainly.com/question/17206790

#SPJ4

It is said that two substances are entirely miscible when they combine to create a single homogenous phase in all ratios. When two substances, like oil and water, are essentially insoluble in one another, they are said to be immiscible.

The substance present in the highest amount is the solvent in all solutions, whether gaseous, liquid, or solid, and the substance(s) present in the least amount is/are the solute (s). The solvent and the solute need not be in the same physical state, although the solvent's physical state typically dictates the nature of the solution. The solute is considered to be soluble in the solvent if they can combine to form a homogenous solution.

Learn more about Substance here-

https://brainly.com/question/24372098

#SPJ4

The value of K(a) is 1.4 × 10⁻⁴.

The pH scale is used in chemistry to determine whether an aqueous solution is basic or acidic. Historically, pH stood for "potential of hydrogen." The pH values of acidic solutions are typically lower than those of basic or alkaline solutions.

A weak monoprotic acid, lactic acid (HA) dissociates in accordance with the following equilibrium:

HA ⇋ H⁺ + A⁻

K(a) = [H⁺] × [A⁻] / [HA]

If C is the initial acid concentration and x is the dissociated concentration of each product, then the expression at equilibrium is:

K(a) = x² / ( C− x )

Now substituting the values C = 0.10 m and the ph of lactic acid is 2.43 in:

x = [H+]

[H+] = 10^{− pH}

10⁻²·⁴³ = 3.63 × 10⁻³ M

Therefore,

K(a) = x² / ( C − x )

K(a) = ( 3.63 × 10⁻³ M)² / ( 0.10 M − 3.63 × 10⁻³ M )

K(a) = 1.4 × 10⁻⁴

Learn more about pH here:

https://brainly.com/question/172153

#SPJ4

The question that can be answered by science is What are the effects of low pH in soil. So, the correct option for this question is D.

Science is a branch of scientific study which involves the knowledge application and understanding of the social world and natural world on the basis of evidences.

Science deals with the natural phenomena and nature. So, the soil is an abiotic component of nature.

It can be classified broadly into the three categories such as Physics, Chemistry, and biology. Each sub-classification tells and demonstrates its own field of studies.

In the soil depends, the low pH depends on various factors like the complexity of the organisms living on a particular area, resources, etc.

So, the question that can be answered by science is "What are the effects of low pH in soil". Thus, the correct option for this question is D.

To learn more about soil pH,

brainly.com/question/13941039

#SPJ1

The electric force on a proton 1.9 fm from the surface of the nucleus 3.1 × 10² N

It is known that charge on xenon nucleus is  equal to +54e. And, charge on the proton is  equal to +e. So, radius of the nucleus is as follows.

           r = [tex]\frac{6.0}{2}[/tex]

          = 3.0 fm

Let us assume that nucleus is a point charge. Hence, the distance between proton and nucleus will be as follows.

                = (1.9 + 2.5) fm

                = 4.4fm

Therefore, electrostatic repulsive force on proton is calculated as follows.

             F = [tex]\frac{1}{4\pi E_{0} } \frac{q_{1} q_{2} }{d^{2} }[/tex]

Putting the given values into the above formula as follows.

          F = [tex]\frac{1}{4\pi E_{0} }\frac{q_{1} q_{2} }{d^{2} }[/tex]

             = 9×10⁹×[tex](\frac{54 * 1.6 *10^{-19} }{4.4 * 10^{-15} } )[/tex]²

                 = 311.2 N

Thus, we ca conclude that 3.1 × 10² N is that the electric force on a proton 1.9 fm from the surface of the nucleus.

The nucleus may be a collection of particles called protons, which are charged , and neutrons, which are electrically neutral. Protons and neutrons are successively made up of particles called quarks.

The nucleus (plural, nuclei) may be a positively charged region at the center of the atom. It consists of two sorts of subatomic particles packed tightly together. The particles are protons, which have a positive charge , and neutrons, which are neutral in charge

A nucleus of an atom has protons and neutrons. we all know that a proton has a charge of + 1 , while a neutron has no charge, or 0. Therefore, the nucleus of an atom will always have a charge .

Learn more about nucleus of a charged particle :

brainly.com/question/16334935

#SPJ4

One of the most ambiguous characteristics of dense neutron-rich materials is the high-density behavior of nuclear symmetry energy.

The nuclear symmetry energy describes how the binding energy changes as a nuclear system's neutron to proton ratio changes. Given that it only pertains to the dual nature of nuclear systems, this is one of the most crucial aspects of nuclear physics in general. As a result, it is one of the most important physical variables that influences how many phenomena and nuclear processes behave in terms of physics. This review article provides an overview of the function and significance of the nuclear symmetry energy in many study areas, as well as the reliability of its estimation from phenomenology and the microscopic many-body theory.

To learn more about nuclear symmetry energy from the given link:

brainly.com/question/28480750

#SPJ4

The mass of the given object will be 186.3g

Given,

Density of the object is 9.22g/cm³

volume of the object is 20.21 cm³

we have to find out mass of the object with the help of these two terms.

As we know,

Density = mass / volume

mass. = density × volume

mass = 9.22 g/cm³ × 20.21 cm³

mass = 186.3 g

Therefore mass of given object is 186.3g.

Learn more about Density here:

https://brainly.com/question/1354972

#SPJ9

If you have .387mol steam, then you used .387 mol CO, and 3*.387 mole H2.  to seek out the molar concentration of CO and H2, subtract what was used from the initial.  the quantity of CH4 of course is the same as H2O.

co(g) h2o(g) ⇀↽ co2(g) h2(g).

What is equilibrium?

Equilibrium is the state in which market supply and demand balance each other, and as a result, prices become stable. Generally, an over-supply for goods or services causes prices to travel down,  which ends up in higher demand. The balancing effect of supply and demand leads to a state of equilibrium.

To know more about equilibrium go to the given link:

https://brainly.com/question/13414142

The total quantity of creosol solution is q1 = 8.25ml.

a flavourless, strong, oily liquid, CH3OC6H3(CH3)OH, made from guaiac resin and beechwood tar; it is an active ingredient in creosote and is used as an antibacterial. Word genesis.

total quantity (q2) = 50 ml

concentration of final solution

C2 = 1:150

= 1/150 * 100

= 0.66%

quantity of stock * concentration of stock = quantity of final solution * concentration of final solution

q1 * c1 = q2 * c2

q1 = 50 * 0.66/4

q1 = 8.25ml

to learn more about creosal solution go to -

https://brainly.com/question/13930404

#SPJ4

Volumetric pipetts, volumetric flasks and burette are the most accurate, the glassware makers calibrate these to a high level of accurасу.

However, if we need exactly 25.0 ml to make up a 'standard' solution, only a volumetric flask would be appropriate

To know more about volumetric flask   visit : https://brainly.com/question/19517011

#SPJ4

The separation of the components of a mixture is based upon the fact that each component has different physical properties. The components of a mixture are separated based on their physical properties.

For example, crude oil is mixture consist of several different hydrocarbons (alkanes, alkenes...).

This hydroalkanes can be separated from mixture (crude oil) using distilation (usually fractional distillation), because they have different boiling points (physical properties).

Mixture is composed of at least two substances.

Pure substance is made of only one type of atom (element) or only one type of molecule (compound), mixtures and solutions are made from two or more types of pure substances.

Mixtures can be separeted by physical means, while compounds cannot.

There is a definite recipe to make each mixture, because composition of mixture can vary.

Missing options:

First question, I can choose from CHEMICAL or PHYSICAL

Second question, I can choose from HOMOGENOUS, UNIFORM, PHYSICAL or CHEMICAL.

More about physical property: brainly.com/question/19921381

#SPJ4

Prefix of appropriate number between 0.1 and 1000 a) 45.320MN, b) 568 hm c) 5.63ug

a) Convert to a prefix that allows the value to be between 0.1 and 1000

               45, 320 kn × [tex]\frac{MN}{1000kn} = 45.320MN[/tex]

(b) 568(105) mm converting to prefix value between 0.1 to 1000

              568× 10 ⁵ mm = 568 ˣ 10⁵ ˣ 10⁻³m

            =    568 × 10²m

            =  568 hm

(c) 0.00563 mg conversion to prefix number in between 0.1 to 1000

                  0.00563 ˣ 10⁻³

                    = [tex]\frac{5.63}{10^{6} }g[/tex]

                   = 5.63 × 10⁻⁶g

                   = 5.63ug

A prefix to the name comes before the molecule. The prefix of the molecule's name is predicated on the number of carbon atoms. for instance , a sequence of six carbon atoms would be named using the prefix hex-. The suffix to the name is an ending that's applied that describes the types of chemical bonds in the molecule.

Dec is for ten carbons. The prefixes for identical groups are mono, di, tri, tetra, penta, hexa, hepta, octa, nona, and deca. Mono is never used in organic chemistry.

Learn more about prefix in organic chemistry :

brainly.com/question/23596769

#SPJ4

The thickness of the aluminum foil in millimeters is 0.0147 mm

The density of a substance is simply defined as the mass of the subtance per unit volume of the substance. Mathematically, it can be expressed as

Density = mass / volume

Density = mass / volume

Thus,

Volume = mass / density

Volume of aluminum = 3.686 / 2.699

Volume of aluminum = 1.366 cm³

Divide by 28316.8 to express in ft³

Volume of aluminum = 1.366 / 28316.8

Volume of aluminum = 4.82×10⁻⁵ ft³

Volume = area × thickness

Divide both sides by area

Thickness = volume / area

Thickness = 4.82×10⁻⁵ / 1

Thickness = 4.82×10⁻⁵ ft

Multiply 304.8 to express in mm

Thickness = 4.82×10⁻⁵ × 304.8

Thickness = 0.0147 mm

Learn more about density:

https://brainly.com/question/952755

#SPJ4

Complete question

A sheet of aluminum foil has a total area of 1.000ft2and a mass of 3.686g. What is the thickness of the foil inmillimeters? (The density of aluminum is 2.699g/cm3)

The correct option is (d) 5-methyl-3-heptanone.

The IUPAC name of the given compound is 5-methyl-3-heptanone.

The International Union of Pure and Applied Chemistry (IUPAC) is the foremost expert on chemical terminology and nomenclature, including the naming of new elements in the periodic table, standardized measurement techniques, atomic weights, and a wide range of other data that has undergone rigorous analysis.

The longest chain of carbons connected by a single bond, whether in a continuous chain or a ring, serves as the foundation for IUPAC nomenclature. According to a particular set of priorities, all deviations, whether multiple bonds or atoms other than carbon and hydrogen are denoted by prefixes or suffixes.

1. First, identify the longest C-chain. Here it is a 7-C chain (-hept)

2. Give the smallest number of functional group (C-3-Ketone)

3. Substitutional group C-5: methyl

Therefore, the IUPAC name of the compound is 5-methyl-3-heptanone.

To know more about IUPAC naming, visit: https://brainly.com/question/11859599

#SPJ4

The correct question is:

"What is the IUPAC name of the following compound?

(a) 2-ethyl-4-hexanone

(b) 3-methyl-5-heptanone

(c) 5-ethyl-3-hexanone

(d) 5-methyl-3-heptanone"

Answer:

false

Explanation:

Pseudoscience is a field of study where researchers claim to be scientific in their research and adopt some of the procedures of science, but fail to fulfill the criteria effectively.

The orbitals overlap to form the c-h bond in ethene, the s-sp2 orbital overlaps to create the C-H bond.

What is sp2 hybridisation?

Three sp2 orbitals, each with a 33% s character and a 67% p character, are created when one s orbital and two p orbitals hybridize. When an atom has three electron groups surrounding it, this kind of hybridization is necessary.

Trigonal hybridization is another name for the sp2 process. One's' orbital and two 'p' orbitals of equivalent energy are combined to create the new hybrid orbital known as sp2. At 1200, a combination of s and p orbitals developed in trigonal symmetry.

To learn more about sp2 hybridisation click the given link

https://brainly.com/question/17426049

#SPJ4

The pH of a solution prepared is 1.12.

c₁(HCl) = 2.5 M; original concentration of the solution of hydrochloric acid (HCl), before it gets diluted

V₁(HCL) = 3.5 ml; the volume of HCl to be diluted

V₂(HCl) = 100 ml; final volume of HCl after dilution.

c₂(HCl) = ?; final concentration of the solution of HCl, after dilution

c₁ · V₁ = c₂ · V₂; formula to calculate concentration of a solution

c₂(HCl) = c₁ · V₁ ÷ V₂.

c₂(HCl) = 2.5 M · 3.0 ml ÷ 100 ml

c₂(HCl) = 0.075 M

Chemical dissotiation of hydrochloric acid:

HCl(aq) → H⁺(aq) + Cl⁻(aq)

c(HCl) = c(H⁺) = 0.075 M

pH = -logc(H⁺)

pH = -log(0.075 M)

pH = 1.12; potential of hydrogen

More about diluted solution: brainly.com/question/24881505

#SPJ4

Add a trace of acidic acid to the eluting solvent mixture.

TLC is the acronym for thin layer chromatography. This type of chromatography occurs when we have an eluting solvent and a stationary phase such as a thick adsorbent paper on a support.

In a chromatography, there is a stationary phase and a mobile phase. The stationary phase here is the sold support while the mobile phase is the eluting solvent which carried the mixture to be separated.

This stationary phase is spotted with the mixture to be eluted and the chromatogram is observed on the stationary phase. We know that an acid would be eluted by a polar solvent.

If the chromatogram is a stretched circle that appears rounder as you move a little farther then you have to add a trace of acidic acid to the eluting solvent mixture.

Learn more about TLC:https://brainly.com/question/17562109

#SPJ1

Missing parts;

You are running a reaction to make a carboxylic acid, but what appears to be the product spot is too low on the tlc plate and is elongated, i.e., it isn't a nice circle but is stretched out a lot. To make this spot rounder and move a little farther, which of the following is most likely to work?

Using a more polar eluting solvent mixture.

Adding a trace of ammonium hydroxide to the eluting solvent mixture.

Adding a trace of water to the eluting solvent mixture.

Adding a trace of methanol to the eluting solvent mixture.

Adding a trace of acidic acid to the eluting solvent mixture.

The elements that react violently with chlorine are;

We know that chlorine is very highly reactive element that is found in group 17 of the periodic table. Owing to the fact that chlorine is highly reactive, it does not occur free in nature. This is why we always find in combined state.

The elements of group 1 could react violently with chlorine to produce a chloride and these elements are;

Learn more about reaction with chorine;https://brainly.com/question/19425987

#SPJ4

Siderophores are specialized molecules that are released to bind ferric ion (fe3) and convey it into the cell.

What is siderophores?

Microorganisms like bacteria and fungus secrete siderophores, which are tiny, highly-affinity iron-chelating molecules. They assist the organism in absorbing iron. Despite the fact that siderophore functions are now understood to have a wider spectrum. The recognized strongest agents for binding Fe3+ are siderophores.

The main purpose of siderophores, which are tiny molecular iron chelators made by microorganisms, is to remove iron from the host and give germs access to this vital metal nutrient.

To learn more about siderophores click the given link

https://brainly.com/question/15118379

#SPJ4