Plane A has just 1 ton of fuel left and has requested plane B to refuel it. Plane B has 21 tons of fuel. Fuel transfer happens at the rate of 1 ton per minute. Use this information as you work through the activity and find how long it will take to refuel plane A until both planes have the same amount of fuel. Let x be the time in minutes and y be the amount of fuel in tons. The equation y = x + 1 represents the quantity of fuel with respect to time in plane A, and y = -x + 21 represents the quantity of fuel with respect to time in plane B. For each equation, find two points that satisfy the equation

The pages that are filled with stamps ​are 252

From the question, we have the following parameters that can be used in our computation:

Stamps = 900

Empty = 72%

Using the above as a guide, we have the following:

Filled = (1 - Empty) * Stamps

So, we have

Filled = (1 - 72%) * 900

Evaluate

Filled = 252

Hence, 252 are filled

Read more about percentage at

https://brainly.com/question/24877689

#SPJ1

If k is the prime number, then the expression 20k is divisible by 2, 5, and k.

If k = 7, then the expression 20k is divisible by 2, 5, and 7.

Given that:

Expression, 20k

The factor of the expression 20k is given as,

20k = 2 x 2 x 5 x k

20k = 2² x 5 x k

If k is the prime number, then the expression 20k is divisible by 2, 5, and k.

If k = 7, then the expression 20k is divisible by 2, 5, and 7.

More about the Algebra link is given below.

https://brainly.com/question/953809

#SPJ1

Using the stars and bars formula, the number of solution sets for a+b+c+d+e = 18 is 7315, which is obtained by arranging 18 stars and 4 bars in a line, giving a total of 22 objects, and choosing 4 of them to be the bars.

This problem can be solved using the "stars and bars" combinatorial technique. We can think of 18 stars representing the total sum, and 4 bars dividing them into 5 bins.

There are a total of 22 objects (18 stars and 4 bars), and we need to choose the positions of the 4 bars out of the 22 objects, which can be done in (22 choose 4) ways.

Therefore, there are (22 choose 4) = 7315 solution sets of positive integers a, b, c, d, and e that satisfy a+b+c+d+e = 18.

To know more about integers:

https://brainly.com/question/15276410

#SPJ4

The correct answer is: A. At the 0.10 level of significance there is enough evidence to reject the research center's claim that 63% of U.S. adults support more surveillance cameras in public places.

To test whether the research center's claim is supported by the sample data, we need to perform a hypothesis test.

The null hypothesis is that the true proportion of U.S. adults who support using more surveillance cameras in public places is equal to 63%, i.e. H0: p = 0.63. The alternative hypothesis is that the true proportion is different from 63%, i.e. H1: p ≠ 0.63.

We can use the normal approximation to the binomial distribution to calculate the test statistic:

z = (p - p) / sqrt(p(1-p)/n)

where p is the sample proportion, p is the hypothesized proportion, and n is the sample size.

Plugging in the values, we get:

p = 210/300 = 0.7

p = 0.63

n = 300

z = (0.7 - 0.63) / sqrt(0.63*0.37/300)

= 2.24 (rounded to two decimal places)

Using a standard normal distribution table or calculator, we find that the p-value for a two-tailed test at the 0.10 level of significance is approximately 0.025 (rounded to three decimal places). Since this p-value is less than 0.10, we reject the null hypothesis.

Therefore, the correct answer is: A. At the 0.10 level of significance there is enough evidence to reject the research center's claim that 63% of U.S. adults support more surveillance cameras in public places.

To learn more about distribution visit:

https://brainly.com/question/29062095

#SPJ11

The given conditions, we can use them to simulate inventory levels, forecast sales, and make production and procurement decisions.

To generate demand for 100 SKUs that satisfies the given conditions, we can use a random number generator in Excel.

First, we can generate a random demand value for each SKU using the following formula: =NORM.INV(RAND(),(8000-3000)/2+3000,(8000-3000)/6)

This generates a random demand value from a normal distribution with mean = (8000-3000)/2+3000 = 5500 and standard deviation = (8000-3000)/6 = 833.33, ensuring that the mean demand is between 3000 and 8000.

Next, we can calculate the coefficient of variation (CV) for each SKU using the formula: =STDEV.P(A1:A104)/AVERAGE(A1:A104)

Then, we can use Excel's Goal Seek function to adjust the random demand values until the average number of weeks with zero demand and the square of the CV fall within the specified ranges.

For example, we can set up a table with columns for SKU, demand, CV, and weeks with zero demand. Then, we can use the following steps:

Enter random demand values for each SKU using the formula above.

Calculate the CV for each SKU using the formula above.

Calculate the number of weeks with zero demand for each SKU using the formula: =SUM(IF(A1:A104=0,1,0))

Calculate the average number of weeks with zero demand for all SKUs using the formula: =AVERAGE(D1:D104)

Calculate the square of the CV for all SKUs using the formula: =VAR.P(C1:C104)/AVERAGE(B1:B104)^2

Use Excel's Goal Seek function to adjust the demand values until the average number of weeks with zero demand falls between 20 and 40 and the square of the CV falls between 0.30 and 0.85.

To use Goal Seek, we can go to Data > What-If Analysis > Goal Seek, and set up the following:

Set "Set Cell" to the cell containing the average number of weeks with zero demand.

Set "To Value" to a value between 20 and 40.

Set "By Changing Cell" to the range of cells containing the demand values.

Click OK.

Excel will then adjust the demand values until the average number of weeks with zero demand falls within the specified range. We can repeat this process for the square of the CV until it also falls within the specified range

Once we have generated demand values that satisfy the given conditions, we can use them to simulate inventory levels, forecast sales, and make production and procurement decisions.

To learn more about  conditions visit:

https://brainly.com/question/13708575

#SPJ11

The width of each locker is 1 1/4 foot.

We have,

Length = 1 foot

Volume = 7 1/2 cubic feet

Height = 6 foot

So, Volume of Prism = l w h

7 1/2 = (1) w (6)

15/2 = 6w

w= 15/(2 x 6)

w = 5/4

w= 1 1/4 foot

Learn more about Volume here:

https://brainly.com/question/21286447

#SPJ1

The formula for the area of a regular octagon in proportion to its Apothem, which in this case is 18, is used to arrive at the following result. As a result, the area of the Octagon provided is 1,446.

An apothem is  a line from the center of a regular polygon at right angles to any of its sides.

This shape's computation utilizing solely its apothem features several curved bends. To calculate the area, we first divide the octagon into triangles.

We may get the area of the Octagon by multiplying the area of the triangles by the total number.

As a result, the area of the Octagon (A) = (1/2b*h)n.

Where b is the base

          height = h

          n is the number of triangles.

Remember that the total angle in a circle is 360°, thus if all the triangles are equal, we must divide 360° by 8 triangles to find the angle in each triangle's vertex.

Thus, 360°/8 = 45°

As a result, we obtain the angle of our triangle opposite the base.

Remember that the triangle is divided in two such that each triangle is a right-angled triangle.

As a result, for each right angle triangle, the angle opposite the base is given as:

45°/2 = 22.5°

So we use the rule of tangents to calculate the length of the opposite side (x):

That is to say:

x = 18 Tan 22.5°

= 18 * 0.55785173935

≈ 10.04

As a result, if x equals 10.04, the area of that triangle is

= 1/2 * 10.04 * 18 (which is 1/2bh)

= 90.3792

We may deduce from the foregoing that the Area of the triangle with the Apothem is

= 90.3792 * 2

= 180.74

Recall our formula for finding the area of the octagon:

A = (1/2bh)n

A = (108.74) *8

A = 1,445.95

Learn more about Apothem:
https://brainly.com/question/29074297
#SPJ1

To find the area of the regular octagon with center O, divide it into smaller shapes, calculate their areas, and sum them up: (8 * side length^2) + (2 * side length^2 * √2) ≈ 11.3 * side length^2 (rounded to the nearest tenth).

To find the area of a regular octagon with center O, you can divide it into smaller shapes and then sum up their areas.

A regular octagon can be divided into eight congruent isosceles triangles and a square at the center.

Let's assume the side length of the octagon is "s."

Each of the eight isosceles triangles has two equal sides, which are also radii of the octagon, and one base.

The angle between these two radii is 45 degrees because there are 360 degrees in an octagon, and each interior angle of a regular octagon is 135 degrees (360°/8).

This makes each of the two equal angles in the isosceles triangle 67.5 degrees (half of 135 degrees).

You can find the area of one of these isosceles triangles using the formula for the area of a triangle:

Area = (1/2) * base * height

The base is "s," and the height can be calculated using trigonometry:

height = s * sin(67.5 degrees)

Now, you can find the area of one isosceles triangle:

Area of one triangle = (1/2) * s * s * sin(67.5 degrees)

There are eight such triangles in the octagon, so the total area contributed by the triangles is:

Total area of triangles = 8 * (1/2) * s * s * sin(67.5 degrees)

Next, you need to find the area of the square at the center.

The diagonals of this square are equal to the sides of the octagon (s).

The area of the square is:

Area of square = s * s

Now, add the areas of the triangles and the square to find the total area of the octagon:

Total area of octagon = Total area of triangles + Area of square

Total area of octagon = 8 * (1/2) * s * s * sin(67.5 degrees) + s * s.

Now, you can calculate the area of the octagon by plugging in the values:

Total area = 8 * (1/2) * s^2 * sin(67.5 degrees) + s^2

Using the value of sin(67.5 degrees) ≈ 0.9239 (rounded to four decimal places):

Total area ≈ 8 * (1/2) * s^2 * 0.9239 + s^2

Simplify:

Total area ≈ 4 * s^2 * 0.9239 + s^2

Total area ≈ 3.6956s^2 + s^2

Total area ≈ 4.6956s^2

Now, you can round this to the nearest tenth if necessary.

The area of the regular octagon with side length "s" is approximately 4.7s^2 square units.

For similar question on regular octagon.

https://brainly.com/question/30131610

#SPJ2

Answer: 10º

Step-by-step explanation:

You add 92 with 78, which will give you 170. Then, you subtract 180 with 170 which gives you 10º

The largest three-digit number that can be written in the form 3m + 2n is 1997.

To find the largest three-digit number that can be written in the form 3m + 2n, we need to maximize both m and n while staying within the constraints of being positive integers.

Let's start by considering the maximum value for m. Since m is multiplied by 3, we want m to be as large as possible while still being a positive integer. The largest positive integer value for m in this case is 333, as 334 would result in a four-digit number.

Next, let's consider the maximum value for n. Similarly, we want n to be as large as possible while still being a positive integer. The largest positive integer value for n is 499, as 500 would also result in a four-digit number.

Now, let's substitute these values into the expression 3m + 2n:

3(333) + 2(499) = 999 + 998 = 1997

To know more about Exponent refer here:

https://brainly.com/question/5497425

#SPJ11

The proportion of individuals with the common attribute in the first sample is 0.525, while in the second sample, it is 0.728.

We have,
To analyze these samples, we can calculate the proportion of individuals with a common attribute in each sample.

Step 1: Calculate the proportion for the first sample
Divide the number of people with the common attribute (21) by the total number of people in the sample (40).
Proportion 1 = 21/40 = 0.525

Step 2: Calculate the proportion for the second sample
Divide the number of people with the common attribute (1528) by the total number of people in the sample (2100).
Proportion 2 = 1528/2100 = 0.728

Thus,

The proportion of individuals with the common attribute in the first sample is 0.525, while in the second sample, it is 0.728.

Learn more about proportions here:

https://brainly.com/question/31548894

#SPJ11

We reject the null hypothesis and conclude that there is strong evidence to support the claim that the mean composite satisfaction rating for the XYZ-Box exceeds 42.

The null and alternative hypotheses are:

H_0: mu <= 42

H_a: mu > 42

Using the sample mean, sample size, and population standard deviation given, we can calculate the test statistic:

z = (x - mu) / (sigma / sqrt(n))

z = (42.85 - 42) / (2.65 / sqrt(68))

z = 2.56

Using a standard normal distribution table or calculator, we can find the critical values for each significance level:

a = 0.10: z_crit = 1.28

a = 0.05: z_crit = 1.645

a = 0.01: z_crit = 2.33

a = 0.001: z_crit = 3.09

Since our test statistic is greater than the critical value at a = 0.10 and a = 0.05, we reject the null hypothesis at these levels. However, we fail to reject the null hypothesis at a = 0.01 and a = 0.001.

To calculate the p-value, we can use a standard normal distribution table or calculator to find the probability that a z-score is greater than or equal to our test statistic:

p-value = P(Z >= 2.56)

p-value = 0.0052

Since the p-value is less than all of the given significance levels, we reject the null hypothesis and conclude that there is strong evidence to support the claim that the mean composite satisfaction rating for the XYZ-Box exceeds 42.

To learn more about hypothesis visit:

https://brainly.com/question/31319397

#SPJ11

Essie would need approximately 0.03 gallons of paint (2.61 ÷ 100) to cover the entire exterior of the jewelry box.

To calculate how much paint Essie needs, you need to know the surface area of the jewelry box. The surface area is the sum of the areas of all the faces of the box.

Assuming the jewelry box is rectangular in shape, you can calculate the surface area using the following formula:

Surface area = 2lw + 2lh + 2wh

Where l, w, and h are the length, width, and height of the box, respectively.

Once you know the surface area, you can determine how much paint is needed by using the coverage rate of the paint. Coverage rate is the amount of surface area that can be covered by a gallon of paint.

For example, if the jewelry box has dimensions of 10 inches by 8 inches by 6 inches, the surface area would be:

Surface area = 2(10 x 8) + 2(10 x 6) + 2(8 x 6)

Surface area = 160 + 120 + 96

Surface area = 376 square inches

If the coverage rate of the paint is 100 square feet per gallon, then you can convert the surface area from square inches to square feet by dividing by 144 (since there are 144 square inches in a square foot):

376 square inches ÷ 144 = 2.61 square feet

So, Essie would need approximately 0.03 gallons of paint (2.61 ÷ 100) to cover the entire exterior of the jewelry box.

Learn more about surface area

https://brainly.com/question/29298005

#SPJ4

By solving the system of equations, we get x1 = 21, x2 = 40, and x3 = 401.

(a) The given statement, "Every system of linear equations for which the coefficient matrix is square has a unique solution" is false because a square coefficient matrix can lead to a unique solution, no solution, or infinitely many solutions, depending on the determinant and the properties of the matrix.

(b) The given statement, "Every system of equations has a solution" is false because some systems of equations may have no solution, such as when the equations represent parallel lines in a linear system. Remember that when solving a system of linear equations, it is crucial to verify the correctness of the given equations and follow the appropriate steps.

To solve the system of equations given, we first need to write it in the form of a coefficient matrix.

21 + 23 = 1
40 + 0 + 503 = 3
401 + x₂ + 403 = 2

can be written as

| 1 1 0 |   | x₁ |   | 1 |
| 0 1 503 | * | x₂ | = | 3 |
| 0 1 0 |   | x₃ |   | 2 |

where x₁ = 21, x₂ = 40, and x₃ = 401.

(a) The statement is false. A square coefficient matrix does not guarantee a unique solution. It is possible for a system of linear equations with a square coefficient matrix to have no solutions or infinitely many solutions.

(b) The statement is also false. A system of equations may not have a solution if the equations are inconsistent, meaning they contradict each other. In other cases, the system may have infinitely many solutions.

Therefore, we cannot assume that every system of linear equations has a solution.

Learn more about linear equations at https://brainly.com/question/28732353

#SPJ11

The mean of the sampling distribution of means always equals the mean of the underlying raw score population when the sample size is large. This is known as the central limit theorem, which is a fundamental principle in statistics that describes the behavior of sample means.

The central limit theorem states that as the sample size increases, the distribution of sample means approaches a normal distribution with a mean equal to the population means and a standard deviation equal to the population standard deviation divided by the square root of the sample size. This means that the larger the sample size, the more representative the sample mean is of the population mean.

The central limit theorem is important in statistical analysis because it allows us to make inferences about population parameters based on sample data. By calculating the mean and standard deviation of the sampling distribution of means, we can estimate the population means and assess the probability of obtaining certain sample means.

However, it is important to note that the central limit theorem applies only to random samples from a population with finite variance. It may not hold for non-random samples or populations with infinite variances. Additionally, the theorem assumes that the sample means are independent and identically distributed and that the sample size is sufficiently large.

To learn more about Sampling distribution, visit:

https://brainly.com/question/15201212

#SPJ11

A quadrilateral with one pair of parallel sides is called a trapezoid.

A quadrilateral is a polygon with four sides.

It can have different types based on its properties such as angles and sides.

One way to classify a quadrilateral is by its sides.

A quadrilateral with one pair of parallel sides is called a trapezoid.

A trapezoid has two parallel sides called the bases and two non-parallel sides called legs.

The height or altitude of a trapezoid is the perpendicular distance between the bases.

To learn more on Quadrilateral click:

https://brainly.com/question/29934440

#SPJ1

Answer:

Step-by-step explanation:

Jackson will have 112 cards in his collection after 7 years. The Option D is correct.

The difference between the number of cards in year 2 and year 3 is:

= 48 - 32

= 16

Note: Its covers a span of 3 - 2 = 1 year. Therefore, the average number of cards added per year between years 2 and 3 is 16/1 = 16.

Now we can estimate the number of cards Jackson will have in year 7 by stating the following formula:

= Number of cards in year 5 + (Average number of cards added per year) x (Number of years from year 5 to year 7)

= 80 + 16 x (7 - 5)

= 80 + 32

= 112 cards

Read more about cards

brainly.com/question/28714039

#SPJ1

In the first scenario, the researcher is interested in studying the effects of the environment on encoding and retrieving. To do this, they select a sample of college students and ask them to memorize a list of eclectic vocabulary words in a vibrant orange room.

In the second scenario, the professor is interested in determining if psychology students study more than the average college student. To test this hypothesis, the professor records the weekly study rate of a sample of 20 psychology students and compares it with the University's data on the average number of hours each week a typical college student studies. By comparing these two sets of data, the professor can determine if psychology students do indeed study more than the average college student. This research design allows the professor to test their hypothesis and draw conclusions about the study habits of psychology students compared to other college students.
A researcher is interested in examining the effects of the environment on encoding and retrieving information. To do this, they select a sample of college students and instruct them to memorize a list of eclectic vocabulary words in a vibrant orange room. This process is known as encoding, where the students are transforming the information into a form that can be stored in their memory.

After the encoding phase, the researcher divides the sample into two groups: one group remains in the orange room, while the other half is taken to a drab beige room. The students are then tested on their ability to recall the studied words, which is the process of retrieving information from memory.

In a separate study, a professor believes that psychology students study more than the average college student due to their understanding of the benefits of distributed practice. To test this hypothesis, the professor collects data by recording the weekly study rate of a sample of 20 psychology students. This data is then compared to the university's data on the average number of hours each week that a typical college student studies. By comparing these two sets of data, the professor can determine if psychology students indeed study more than the average college student.

Learn more about :

vocabulary  : brainly.com/question/25312924

#SPJ11

Answer:undefined

Step-by-step explanation:

straight up and down lines are undefined

The steps that Scott would have to follow in the long division problem include divisions and additions and would result in 5. 793 .

Follow these steps to solve the long division problem with 25.16 as divisor and 145.75 as dividend:

Next, perform the long division operation solely utilizing whole numbers:

Since there are no further digits to perform computations on within the divisor, we can express the remainder as a fraction over the divisor--utilizing notation where the remaining total is represented as 1, 995 / 2, 516.

Add the decimal to the quotient :

= 5 + 0. 793

= 5. 793

Find out more on long division at https://brainly.com/question/25289437

#SPJ1

Step-by-step explanation:

Base area is 6 in x 4 in = 24 in^2

Now if you multiply by the height  you will get the VOLUME in units of   in^3

We can see that 7/4 is located between 3/4 and 1 on the first interval, and 9/4 is located between 2 and 5/2 on the second interval.

To partition each whole number interval into fourths, divide each interval by 4. Label 7/4 between 3/4 and 1 and label 9/4 between 2 and 5/2 on an extended scale from 0 to 3.

To partition each whole number interval into fourths, we can divide each interval by 4. For example, the interval from 0 to 1 can be divided into fourths as follows:

0 -------- 1/4 -------- 1/2 -------- 3/4 -------- 1

Now, to label 7/4 and 9/4 on this scale, we can extend it by adding another interval from 1 to 2 and dividing it into fourths as well. This would give us the following scale:

0 -------- 1/4 -------- 1/2 -------- 3/4 -------- 1 -------- 5/4 -------- 3/2 -------- 7/4 -------- 2 -------- 9/4 -------- 5/2 -------- 11/4 -------- 3

So we can see that 7/4 is located between 3/4 and 1 on the first interval, and 9/4 is located between 2 and 5/2 on the second interval.

Learn more about whole number

https://brainly.com/question/29766862

#SPJ4

Answer:

The sum of the interior angles of any quadrilateral is 360 degrees.

So, let x be the measure of the fourth angle. Then we can write the equation:

98 + 139 + 80 + x = 360

Simplifying this equation gives:

317 + x = 360

Subtracting 317 from both sides gives:

x = 43

Therefore, the measure of the fourth interior angle of this convex quadrilateral is 43 degrees.

Step-by-step explanation:

The measure of the fourth interior angle of the convex quadrilateral is 43 degrees. To find the measure of the fourth interior angle of a convex quadrilateral, we'll use the following terms: interior, angles, quadrilateral, and measure.

Step 1: Remember that the sum of interior angles of a quadrilateral is always 360 degrees.

Step 2: Add the three given interior angles: 98 + 139 + 80 = 317 degrees.

Step 3: Subtract the sum of the three angles from the total sum of quadrilateral angles (360 degrees) to find the measure of the fourth angle: 360 - 317 = 43 degrees.

The measure of the fourth interior angle of the convex quadrilateral is 43 degrees.

Learn more about interior angle here:

brainly.com/question/21156833

#SPJ11

The Fourier transform of x(t) is zero for all frequencies.

(a) x(t) = δ(t-1)

Using the time-shifting property of the Fourier transform, we have:

F{δ(t-a)} = e^{-j2πf a}

Therefore,

F{x(t)} = F{δ(t-1)} = e^{-j2πf (1)}

The Fourier transform of x(t) is a complex exponential at frequency f = 1:

F{x(t)} = e^{-j2π} = cos(2π) - j sin(2π) = -1

(b) x(t) = δ(t-1) + δ(t+1)

Using the linearity property of the Fourier transform and the time-shifting property, we have:

F{x(t)} = F{δ(t-1)} + F{δ(t+1)} = e^{-j2πf (1)} + e^{j2πf (1)}

The Fourier transform of x(t) is a sum of two complex exponentials at frequencies f = ±1:

F{x(t)} = e^{-j2π} + e^{j2π} = cos(2π) - j sin(2π) + cos(2π) + j sin(2π) = 0

Therefore, the Fourier transform of x(t) is zero for all frequencies.

To learn more about frequencies visit:

https://brainly.com/question/5102661

#SPJ11

There are 19 orange fish and 12 red fish in the tank. This was found by setting up and solving a system of equations based on the given information.

We can set up a system of equations. Let x be the number of red fish in the tank. We know that the total number of fish is 31, so the number of orange fish must be 31 - x.

We also know that there are 7 more orange fish than half the number of red fish, which can be written as: 31 - x = 7 + 0.5x. Solving for x, we get: 1.5x = 24. x = 16

Hence, there are 16 red fish in the tank. To find the number of orange fish, we can substitute x = 16 into the equation we derived earlier: 31 - 16 = 15. 15 = 7 + 0.5(16). 15 = 15. Hence, there are 15 orange fish in the tank.

Learn more about equations here:

https://brainly.com/question/15707224

#SPJ4

The mean replacement time for the quartz timepieces produced by Company XYZ is 15.7 years with a standard deviation of 1.2 years. The company wants to provide a warranty so that only 1.5% of the quartz timepieces will be replaced before the warranty expires.

To find the time length of the warranty, we can use the formula for z-score:

z = (x - μ) / σ

where x is the value, we want to find, μ is the mean, σ is the standard deviation and z is the corresponding z-score.

We can use a z-score table or calculator to find that the z-score corresponding to 1.5% is approximately -2.33.

-2.33 = (x - 15.7) / 1.2

Solving for x gives:

x = 13.9 years (rounded to one decimal place)

Therefore, Company XYZ should provide a warranty of 13.9 years so that only 1.5% of the quartz timepieces will be replaced before the warranty expires.

#SPJ11

Learn more through a similar question: https://brainly.com/question/31170896.

The relative frequency of the coin turning up heads in this experiment is 0.47

First, let's determine the number of times the coin came up heads. Maria flipped the coin 60 times, and it came up tails 32 times. Therefore, it came up heads 60 - 32 = 28 times. Now, let's calculate the relative frequency of the coin turning up heads. The relative frequency is the ratio of the number of times an event occurs to the total number of trials.

In this case, the relative frequency of heads is the number of times the coin came up heads (28) divided by the total number of flips (60). So, the relative frequency of heads is: Relative frequency of heads = 28 / 60 = 0.4666...

Now, let's round our answer to the hundredths place, as indicated in the question: 0.4666... ≈ 0.47

Learn more about relative frequency here: brainly.com/question/30466267

#SPJ11

Answer:

$270.00

Step-by-step explanation:

Simple Interest, describes interest that only applies to the principle balance (aka first balance). In the graph, that is represented by the green line.

The correct answer is option (d) (2.21, 3.21).

To construct a 90% confidence interval for the population mean, we will use the formula:

CI = x ± z* (σ/√n)

where x is the sample mean, σ is the population standard deviation, n is the sample size, and z* is the z-score that corresponds to the desired confidence level.

Since we are given the population standard deviation, we can use it directly in the formula. The sample mean is also given as 2.30, so we just need to find the appropriate z-score. For a 90% confidence level, the z-score is 1.645.

Substituting the given values in the formula, we get:

CI = 2.30 ± 1.645 * (0.89/√15)

Simplifying this expression, we get:

CI = (2.21, 3.21)

Therefore, the correct answer is option (d) (2.21, 3.21).

To learn more about confidence visit:

https://brainly.com/question/28969535

#SPJ11