Please answer the both questions in the photos below ( will mark brainliest if available + 30p )

Measure of ∠1 = 126 deg, Measure of ∠4 = 54 deg, and measure of ∠7 = 126 deg.

∵ Lines p and q are parallel, and t is transversal,

∴ ∠3 and ∠7 form pair of corresponding angles,

⇒ ∠3 and ∠7 are equal

∴∠7=126 deg.

Also, ∠3 and ∠1 are vertically opposite angles,

∴ ∠3 and ∠1 are equal.

⇒ ∠1=126

Again, as t is a straight line and line p intersects it,

∴ ∠3 and ∠4 form linear pair.

⇒ ∠3 and ∠4 are complementary.

⇒ ∠3+∠4=180

⇒ ∠4+126=180

⇒ ∠4=180-126

⇒ ∠4=54

Hence, measure of ∠1 is 126 deg, that of ∠4 is 54 deg, and that of ∠7 is 126 deg.

For more information on parallel lines and transversals,

https://brainly.com/question/23573963?referrer=searchResults

https://brainly.com/question/13702600?referrer=searchResults

The distance between these two streets on Broad St 0.2 miles.

We must apply the idea of comparable triangles to this issue in order to find a solution. Assume that Thomas St. and Denny Way. are separated by x miles on Broad St. Then, we can establish the ratio shown below:

0.2 miles on Aurora Avenue equals x miles on Broad Street

By cross-multiplying and simplifying, we may find the value of x:

Distance on Aurora Ave / (x * 0.2 miles) on Broad St

Broad Street distance is equal to (x * 0.2 miles)/0.2 miles. (since the distance on Aurora Ave is given as 0.2 miles)

Broad Street: distance = x

As a result, Thomas St. and Denny Way are separated by x miles, or 0.2 miles, on Broad St. Thus, the response is:

Distance between Thomas St and Denny Way on Broad St = 0.2 miles (rounded to the nearest tenth of a mile)

For such more question on distance:

https://brainly.com/question/28551043

#SPJ11

The first quartile is 6, the median is 7.5 and the third quartile is 8.5. The box plot has been attached below.

What is a median?

A data set can be described more accurately than its average by using the median, which is the midpoint of an ordered, ascending or descending list of integers.

The data is given as 5.5, 6, 6, 6.5, 7, 7.5, 8, 8, 8.5, 9, 9.

From this, we get the first quartile to be 6.

The median is 7.5 and the third quartile is 8.5.

The box plot of the data has been plotted and attached below.

Hence, the required solution has been obtained.

Learn more about median from the given link

brainly.com/question/16408033

#SPJ1

Question: There are 11 dancers in a performance. Their ages (in years) are: 5.5, 6, 6, 6.5, 7, 7.5, 8, 8, 8.5, 9, 9.

1. Determine the first quartile, median, and third quartile of the dancers' ages.

2. Drag the movable points to label them on the box plot.

The area of the square with given side 18 cm is 324 square cm.

The equation for a square's surface area A square is a quadrilateral with four equal sides and four right angles, which is how Side x Side is obtained. By multiplying one side's length by the other side's length, which is likewise the same length, one may get the area of a square, which is the amount of space within the square. As a result, Side x Side is the formula for calculating a square's area.

Given that the length of the side of square = 18cm.

The area of the square is given as:

A = (s)(s)

Substituting the value we have:

Area = 324 square cm

Hence, the area of the square is 324 square cm.

Learn more about area of square here:

https://brainly.com/question/30556035

#SPJ1

Answer: x=120

Step-by-step explanation:

If it is a regular polygon then the sum of internal angles is 180 degrees. Each angle should be 60. Since a straight line is 180, 180 - 60 would equal x!

Answer: 120

Step-by-step explanation: A triangle has a sum of 180°. A regular polygon has equal angles, so you divide 180 by 3, getting 60. Next x is supplementary to the adjacent angle, so you must do 180-60, yielding 120° as x.

the height VO of the rectangular pyramid VPQRS is 5 cm.

WHAT IS RECTANGULAR PYRAMID?

A rectangular pyramid is a type of pyramid where the base is a rectangle and the lateral faces are triangles with a common vertex (apex) that is not in the plane of the base. It is a polyhedron with a rectangular base and triangular faces that meet at a single vertex. The height of the pyramid is the perpendicular distance from the apex to the base. The volume of a rectangular pyramid can be calculated using the formula:

V = (1/3) * base area * height

where base area is the area of the rectangular base and height is the perpendicular distance from the apex to the base.

To find the height VO of the rectangular pyramid VPQRS, we can use the formula for the volume of a pyramid:

V = (1/3) * base area * height

where base area is the area of the rectangle formed by the base of the pyramid, and height is the height of the pyramid.

We are given that the volume of the pyramid is 100 cm³. We can also find the base area by multiplying the length PQ by the width QR:

base area = PQ * QR = 10 cm * 6 cm = 60 cm²

Substituting these values into the formula for the volume of a pyramid, we get:

100 cm³ = (1/3) * 60 cm² * height

Simplifying, we get:

height = (100 cm³ * 3) / (60 cm²)

height = 5 cm

Therefore, the height VO of the rectangular pyramid VPQRS is 5 cm.

To know more about rectangle visit:-

https://brainly.com/question/2607596

#SPJ1

Answer:

c = 18

Step-by-step explanation:

expand the factor in j(x) and compare like terms with k(x)

j(x) = 2(x + 3)² ← expand factor using FOIL

    = 2(x² + 6x + 9) ← distribute parenthesis by 2

   = 2x² + 12x + 18

compare to k(x) = 2x² + 12x + c

the 2 expressions are equivalent when c = 18

Parker is wrong, as the volume of the cube container is obtained as [tex]\frac{1}{512} t^9u^{12}[/tex].

What is volume?

Each thing in three dimensions takes up some space. The volume of this area is what is being measured. The space occupied within an object's borders in three dimensions is referred to as its volume. It is sometimes referred to as the object's capacity.

The volume of a cube is given by the formula V = s³, where s is the length of one side of the cube.

In this case, the length of the container is given as [tex]\frac{1}{8} t^3u^4[/tex].

To find the volume of the cube, we need to cube this length -

[tex]V=\big(\frac{1}{8} t^3u^4\big)^3[/tex]

Simplifying this expression using the rules of exponents, we get -

[tex]V=\big(\frac{1}{8}\big)^3 \times (t^3)^3 \times (u^4)^3[/tex]

[tex]V =\frac{1}{512} t^9u^{12}[/tex]

So, the actual volume of the container is [tex]\frac{1}{512} t^9u^{12}[/tex], not [tex]\frac{1}{12} t^9u^{12}[/tex] as Parker said.

Therefore, Parker is incorrect.

To learn more about volume from the given link

https://brainly.com/question/1972490

#SPJ1

The result would be (C) 27 if the above statement is accurate.

Three categories of integers exist: Zero (0) (0) Good integers (Natural numbers) Integer Negatives (Additive inverse of Natural Numbers).

As the two numbers are consecutive, we will refer to the smaller integer as "x" and the larger one as "x + 1".

In accordance with the issue, we have:

2x + (1/2)(x + 1) = 33

To eliminate the fraction, multiply everything by 2 and you obtain the following:

4x + x + 1 = 66

If we simplify, we get:

5x = 65

When we multiply both parts with 5, we get:

x = 13

Hence, 13 is the smaller number while 14 is the larger number.

The two integers' total is:

13 + 14 = 27

Hence, the response is (C) 27.

To know more about integers, visit:

https://brainly.com/question/929808

#SPJ1

The graph's scales could be represented by the x-axis, which could be labelled from 0 to 12 with a scale of 1, and the y-axis, which could be labelled from 0 to 100 with a scale of 10.

The horizontal scale used in a graph is called the X axis. Measurements on the coordinate plane are made using it as a reference line. The position of an object on that plane is described by its distance from the x and y axes.

All potential data that can be graphed is represented by the numbers on the X and Y axes. Each number here is different by ten. Scale is the name for this. On a coordinate grid, scale is the distance between each square.

To know more about graph's scales visit:-

https://brainly.com/question/30874892

#SPJ1

Answer:

Let x be the length of the base of the triangle, then the height h is given by h = 2x - 3 (since the height is 3 inches less than twice the length of the base).

The area of a triangle is given by the formula A = (1/2)bh, where b is the base and h is the height. We are given that the total area of the triangle is 7 square inches, so we can write:

(1/2)(x)(2x - 3) = 7

Multiplying both sides by 2 to eliminate the fraction, we get:

x(2x - 3) = 14

Expanding the left side, we get:

2x^2 - 3x = 14

Subtracting 14 from both sides, we get:

2x^2 - 3x - 14 = 0

We can now use the quadratic formula to solve for x:

x = (-b ± sqrt(b^2 - 4ac))/(2a)

where a = 2, b = -3, and c = -14. Plugging in these values, we get:

x = (-(-3) ± sqrt((-3)^2 - 4(2)(-14)))/(2(2))

= (3 ± sqrt(169))/4

= (3 ± 13)/4

Taking the positive value for x (since the length of the base must be positive), we get:

x = (3 + 13)/4

= 4

Therefore, the length of the base is 4 inches. To find the height h, we can use the formula h = 2x - 3:

h = 2(4) - 3

= 5

So the height of the triangle is 5 inches.

A linear equation to represent the line shown on the graph is given as:

y = 2x - 2.

General point-slope form is:

y = mx + c

(x1, y1) = (3, 2)

y intercept = -2

m = (2 + 2)/(2 - 0)

m = 2

y = 2x + (-2)

y = 2x - 2

Thus,  a linear equation to represent the line shown on the graph is given as: y = 2x - 2.

Know more about point-slope form

https://brainly.com/question/6497976

#SPJ1

The correct question is-

Write a linear equation to represent the line shown on the graphs shown by question 7.

[tex]~~~~~~~~~~~~\textit{distance between 2 points} \\\\ P(\stackrel{x_1}{19}~,~\stackrel{y_1}{10})\qquad Q(\stackrel{x_2}{26}~,~\stackrel{y_2}{13})\qquad \qquad d = \sqrt{( x_2- x_1)^2 + ( y_2- y_1)^2} \\\\\\ PQ=\sqrt{(~~26 - 19~~)^2 + (~~13 - 10~~)^2} \implies PQ=\sqrt{( 7 )^2 + ( 3 )^2} \\\\\\ PQ=\sqrt{ 49 + 9 } \implies PQ=\sqrt{ 58 }\implies PQ\approx 7.62 \\\\[-0.35em] ~\dotfill[/tex]

[tex]~~~~~~~~~~~~\textit{middle point of 2 points } \\\\ P(\stackrel{x_1}{19}~,~\stackrel{y_1}{10})\qquad Q(\stackrel{x_2}{26}~,~\stackrel{y_2}{13}) \qquad \left(\cfrac{ x_2 + x_1}{2}~~~ ,~~~ \cfrac{ y_2 + y_1}{2} \right) \\\\\\ \left(\cfrac{ 26 +19}{2}~~~ ,~~~ \cfrac{ 13 +10}{2} \right) \implies \left(\cfrac{ 45 }{2}~~~ ,~~~ \cfrac{ 23 }{2} \right)\implies \stackrel{ \textit{\LARGE M} }{\left(22\frac{1}{2}~~,~~11\frac{1}{2} \right)}[/tex]

Aiden's estimated the length of a piece of rope as 8.5 inches, while its actual length is 7.1 inches. Therefore, the percent error of Aiden's estimate is 11.3%.

To calculate the percent error, you first need to find the difference between the actual length and the estimated length. Subtract 7.1 inches from 8.5 inches and you get 1.4 inches. This is the difference between the two lengths.
Next, divide the difference by the actual length and multiply by 100. The equation is: (difference/actual length) * 100. So, (1.4/7.1)*100 = 11.3%. Therefore, the percent error of Aiden's estimate is 11.3%.
It is important to be accurate when making measurements and estimates. A small difference in numbers can lead to a large error in the final result. Knowing the percent error can help you to improve your measurements and estimates and achieve greater accuracy.

For more such percent error related questions

https://brainly.com/question/5493941

#SPJ11

The statement that "when dealing with fixed effects, a de-meaned model approach is superior to the lsdv approach because the de-meaned model gives us more accurate coefficient estimates" is true.

Fixed effects are a type of regression technique used to understand the effect of a single variable across different groups (such as across countries, across states, across individuals, etc.) by comparing the variance of the variable within each group to the variance of the variable across all groups.

When conducting a fixed effects regression, researchers must choose between the least squares dummy variable (LSDV) and de-meaned model approaches.Both models produce unbiased estimates of the coefficients, but the LSDV model has an advantage in that it provides more flexibility when dealing with interactions between fixed effects and time-varying covariates. On the other hand, the de-meaned model is preferred for reasons of computational efficiency and it can handle certain types of data that the LSDV model cannot (such as panel data with a small number of time periods).

for such more question on Fixed effects

https://brainly.com/question/29563847

#SPJ11

Answer:

What do you mean?

Step-by-step explanation:

Some questions are new and have not been answered yet.

The zeros of the polynomial function f(x) are 3, -[(2 -i√2) / 3] and  -[(2 + i√2) / 3]

To find the zeros of the polynomial function f(x), we need to find the values of x for which f(x) = 0.

We can start by factoring out a common factor of 3x^2 from the polynomial:

f(x) = 3x^3 - 5x^2 - 10x - 6

f(x) = 3x^2(x - 5/3) - 2(5x + 3)

Now, we can set each factor equal to zero and solve for x:

3x^2(x - 5/3) - 2(5x + 3) = 0

3x^3 - 5x^2 - 10x - 6 = 0

x = 3, -[(2 -i√2) / 3],  -[(2 + i√2) / 3]

Learn more on zeros of function here;

https://brainly.com/question/20901045

https://brainly.com/question/2833285

#SPJ1

1. Definition of Congruence:∠ RSU ≅ ∠ VST

2. Definition of Congruence: m∠ RSU = m∠ VST

3. Angle Addition Postulate: m∠ RSU + m∠ USV = m/RSV

4. Angle Addition Postulate: m∠ VST + m∠  USV = m∠ UST

5. Transitive Property: m∠ RSU + m∠ USV = m∠ UST

6. Substitution Property: m∠ RSV = m∠ UST

7. Definition of Congruence: ∠ RSV ≅ ∠ UST

In mathematics, a relation R on a set X is said to have a transitive property if, for all elements a, b, c in X, whenever R relates a to b and b to c, then R also relates a to c.

This is shown in the case of number 6 where :

m∠ RSU + m∠ USV = m∠ UST

The transitive property is also shown in  equality states where all values of a, b, and c, if a = b, and b = c, then a = c.

Learn  more about the transitive property  at: https://brainly.com/question/2437149

#SPJ1

Answer:

Trinominal

Step-by-step explanation:

By definition, Trinominals are those expressions having 3 values, in this case, x^2, x, and the constant 6 are the values.

hope it helps.

Answer:

x = - 4 , x = 4

Step-by-step explanation:

the expression is undefined if the denominator equals zero

equate the denominator to zero and solve for x

x² - 16 = 0 ( add 16 to both sides )

x² = 16 ( take square root of both sides )

x = ± [tex]\sqrt{16}[/tex] = ± 4

that is the expression is undefined when x = - 4 or x = 4

An expression for the difference between their earnings is 2G - G.

In order to write a linear equation to describe this situation, we would assign variables to John's earnings and Grace's earnings respectively, and then translate the word problem into a linear equation as follows:

Since John earns twice as much as his wife Grace, a linear equation that models the situation is given by:

J = 2G

100 = 50

For the difference between their earnings, we have the following:

Difference = J - G

Difference = 2G - G

Read more on expression here: brainly.com/question/25767785

#SPJ1

The volume of the rectangular prism in cubic feet is solved to be

The volume of a rectangular prism is given by the formula

V = l x w x h,

where

l, w, and h represent the length, width, and height of the prism, respectively.

in the problem, the dimensions are:

Therefore, the volume is:

= 1.5 feet * 3.5 feet * 2 feet

= 10.5 feet³

That is to say the volume of the prism is 10.5 feet³

Learn more about rectangular prism at:

https://brainly.com/question/128724

#SPJ1

The area of the given trapezoid above would be = 1.2m²

A trapezoid is defined as a quadrilateral that has four sides with a pair of parallel sides.

To calculate the area of the trapezoid the formula below should be used. That is;

Area = 1/2 (a+b) h

where;

a= 1.7m

b = 0.7m

h = sin∅ = opposite/hypotenuse

where;

opposite = ?

hypotenuse =1.4

sin 45° = h/1.4

h= 0.707106781 ×1.4

h = 1m

Area= 1/2 (1.7+0.7) × 1

= 1.2 m²

Learn more about area here:

https://brainly.com/question/28020161

#SPJ1

The solution to the given problem of speed comes out to be v=21.12m/s.

How quickly something is moving is measured by its speed at a distance. How far an object moves in one unit of time is determined by its speed. Speed is calculated as follows: speed = distance * time. The most widely used speed measurement units are meters per second (m/s), kilometers per hour (km/h), and miles per hour (mph) (mph).

Here,

Given :  A 2.0 m long cord is supporting a 3.3 kg lump of clay.

Two swing up to an absolute maximum of 0.080 meters

Ball and clay's subsequent impact velocity

=>√(2*10*0.08)=1.264m/s

To find the velocity of the ball before collision

0.21*v=(3.3+0.21)*1.264

v=21.12m/s

Therefore, the solution to the given problem of speed comes out to be v=21.12m/s.

To know more about speed, visit

brainly.com/question/2004627

#SPJ4

The correct sequence of transformations is: reflect across the y-axis and then translate 9 units to the right.

In everyday parlance, transformation refers to a mathematical function. A transformation is defined as the invertible function from any set X to its own set X or any other set Y. The transformation for any term may merely signal that the geometric component of this particular function is being studied.

The correct sequence of transformations that could have been used to transform triangle ABC to produce triangle A′′B′′C′′ is:

Triangle ABC was reflected across the y-axis and then translated 9 units right.

To see why, let's compare the coordinates of the corresponding vertices of both triangles:

A (-6, 2) ---> A'' (6, -5)

B (-3, 6) ---> B'' (3, -1)

C (-3, 2) ---> C'' (3, -5)

If we reflect triangle ABC across the y-axis, we obtain a new triangle A'B'C' with vertices:

A' (6, 2)

B' (3, 6)

C' (3, 2)

Then, if we translate triangle A'B'C' 9 units to the right, we obtain triangle A''B''C'':

A'' (6+9, 2) = (15, 2)

B'' (3+9, 6) = (12, 6)

C'' (3+9, 2) = (12, 2)

Which has the same coordinates as triangle A''B''C'' given in the problem statement. Therefore, the correct sequence of transformations is: reflect across the y-axis and then translate 9 units to the right.

Learn more about transformation on:

https://brainly.com/question/27996647

#SPJ1

Answer:

The equation in slope-intercept form of the line perpendicular to y = -3x + 1 and passing through (2, 2) is y = (1/3)x + 4/3.

Step-by-step explanation:

To find the equation of the line perpendicular to y = -3x + 1 and passing through the point (2, 2), we first need to determine the slope of the line we are looking for.

The slope of any line perpendicular to y = -3x + 1 will be the negative reciprocal of the slope of y = -3x + 1. The slope of y = -3x + 1 is -3, so the slope of the line we want is the negative reciprocal of -3, which is 1/3.

So the slope of the line we want is 1/3. We also know that the line passes through the point (2, 2). We can now use the point-slope form of the equation of a line to find the equation of the line we want:

y - y1 = m(x - x1)

where m is the slope of the line, and (x1, y1) is the point the line passes through.

Substituting m = 1/3, x1 = 2, and y1 = 2, we get:

y - 2 = (1/3)(x - 2)

Multiplying both sides by 3, we get:

3y - 6 = x - 2

Subtracting x from both sides, we get:

-x + 3y = 4

So the equation of the line perpendicular to y = -3x + 1 and passing through the point (2, 2) is -x + 3y = 4, which is in standard form. We can also write it in slope-intercept form:

3y = x + 4

y = (1/3)x + 4/3

So the equation of the line we want in slope-intercept form is y = (1/3)x + 4/3.

Hope this helps you! Sorry if it doesn't. If you need more help, ask me! :]

Given:-

[tex] \: [/tex]

[tex] \: [/tex]

Solution:-

[tex] \underline{ \: \sf{[a = 3.8] \: }}[/tex]

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \textsf{put the value of a = 3.8}[/tex]

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

━━━━━━━━━━━━━━━━━━━━━━━

[tex] \underline{ \sf \: [a = 7]\: }[/tex]

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \textsf{ \: put the value of a = 7 \: }[/tex]

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

━━━━━━━━━━━━━━━━━━━━━━━

[tex] \underline{ \sf{[a = -7.2]}}[/tex]

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \textsf{ \: put the value of a = -7.2 \: }[/tex]

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

━━━━━━━━━━━━━━━━━━━━━━━

hope it helps! :)

The value of angle E and angle F are both 22.8°

Circle theorem includes the concept of tangents, sectors, angles, the chord of a circle and proofs. A circle is the locus of all points in a plane which are equidistant from a fixed point.

The theorem that states that the angle at the center is twice the angle at the circumference is applied in this scenario.

angle P = angle of arc DG = 45.6°

therefore angle E = 1/2 angle of arc DG

= 1/2 × 45.6

= 22.8°

angle E = angle F = 22.8° . This because angle in the same segment are equal.

therefore angle E = angle F = 22.8°

learn more about circle geometry from

https://brainly.com/question/24375372

#SPJ1