please help for this question​

The determinant of each of the given matrices are:

1) -4269

2) -1988

3) -68.92

The determinant of a matrix is a number that is specially defined only for square matrices. Determinants are mathematical objects that are very useful in the analysis and solution of systems of linear equations.

Thus:

1) [tex]\left[\begin{array}{ccc}7&&31\\142&&19\\\end{array}\right][/tex]

The determinant of this 2 x 2 matrix is:

(7 * 19) - (142 * 31) = -4269

2) [tex]\left[\begin{array}{ccc}7&11&21\\55&8&2\\-16&1&-9\end{array}\right][/tex]

The determinant of this 3 x 3 matrix is:

7((8*-9) - (1*2)) + 11((55*-9) - (2*-6)) + 21((55*1) - (8*-16)) = -1988

3) [tex]\left[\begin{array}{ccc}5.07&6.02&2.01\\-30.7&2.5&3.5\\3.55&-1.1&2.35\end{array}\right][/tex]

The determinant of this 3 x 3 matrix is:

5.07[(2.5 * 2.35) - (-1.1 *  3.5)] + 6.02[(-30.7 * 2.35) - (3.5 * 3.55)] + 2.01[(-30.7 * -1.1) - (2.5 * 3.55)] = -68.92

Read more about Determinants at: https://brainly.com/question/14218479

#SPJ1

Transformation is a function that takes points on the plane and maps them to other points on the plane.

Transformations can be applied one after the other in a sequence where you use the image of the first transformation as the pre image for the next transformation.

Find the image for each sequence of transformations.

 Using geometry software, draw a triangle and label the

vertices A, B, and C. Then draw a point outside the

triangle and label it P.

Rotate △ABC 30° around point P and label the image as

△A′B′C ′. Then rotate △A′B′C ′ 45° around point P and

label the image as △A″B″C ″. Sketch your result.

 Make a conjecture regarding a single rotation that will map △ABC to △A″B″C″.

Check your conjecture, and describe what you did.

 Using geometry software, draw a triangle and label the

vertices D, E, and F.

To learn more on transformation click:

brainly.com/question/20211457

#SPJ1

The Volume of Cone is 84.8 m³.

We have,

d = 9 m

r= 4.5 m

H = 4 m

So, Volume of Cone

= 1/3 πr²h

= 1/3 (3.14) (4.5)² (4)

= 1/3 (3.14) (20.25) (4)

= 84.8 m³

Thus, the volume is 84.8 m³.

Learn more about volume here:

https://brainly.com/question/29141488

#SPJ1

The problem with Foofy's conclusion is that she drew a general conclusion from a sample without considering potential biases or confounding factors. To make the report better, she could provide more context, acknowledge potential biases, and make it clear that her conclusion only applies to her sample.

The problem with Foofy's conclusion is that it is based on a biased sample. She only surveyed mothers who were employed outside the home, which does not represent all working women. Therefore, her conclusion cannot be generalized to all working women.

To make the report better, Foofy could specify that her conclusion only applies to mothers who are employed outside the home, rather than all working women.

Additionally, she could improve the study's sampling method by randomly selecting a more representative sample of working women, rather than only surveying mothers who are employed outside the home.

To know more about biased sample:

https://brainly.com/question/29257227

#SPJ1

Answer:

It is a function

Step-by-step explanation:

It's a function because it does not over lapp

The period of the function is 1/60 minutes

As a result, blood pressure changes between each heartbeat as a consequence of these oscilllations happening every second.

Max value = 110 mmHg

the minimum = 50 mmHg.

This suggests that systolic pressure remains at 110 mmHg and diastolic pressure is still maintained at 50 mmHg.

blood pressure peaks occur at times t = (1/2 + 2 * k) / 120 seconds.

(a) The given function is:

p(t) = 80 + 30 * sin(120 * pi * t)

This is equivalent to sinusoidal function in the form of:

p(t) = A + B * sin(C * t)

Where:

A is the baseline value,

B is the amplitude, and

C determines the frequency of the function.

Information given in the problem

A = 80, B = 30, and C = 120 * pi.

The period of a sinusoidal function is given by:

Period = 2 * pi / C

Period = 2 * pi / (120 * pi) = 1/60 minutes

The period of the function is 1/60 minutes, which means that the blood pressure oscillates every 1/60 minutes or 1 second. As a result, blood pressure changes between each heartbeat as a consequence of these oscilllations happening every second.

(b) maximum and minimum values of a sinusoidal function

Max value = A + B

Min value = A - B

Substituting the values of A and B:

Max value = 80 + 30 = 110 mmHg

Min value = 80 - 30 = 50 mmHg

Max value = A + B giving values of 110 mmHg

the minimum is A - B delivering 50 mmHg.

This suggests that systolic pressure remains at 110 mmHg and diastolic pressure is still maintained at 50 mmHg.

(c)  the time at which the blood pressure is at its maximum, we solve for t when the sinusoidal function is at its peak.

sin(120 * pi * t) = 1

Taking the inverse sine of both sides:

120 * pi * t = pi/2 + 2 * pi * k (where k is an integer)

Solving for t:

t = (1/2 + 2 x k)/120 (for k = 0, 1, 2, ......)

implying that blood pressure peaks occur at times t = (1/2 + 2 * k) / 120 seconds.

Learn more about blood pressure at

https://brainly.com/question/12977978

#SPJ1

Answer: 3

Step-by-step explanation:

The scale factor is the proportional ratio from one figure to another.

Notice the corresponding lengths are CE≅JS, TC≅TJ, and TE≅TS.

Comparing CE and JS, the length for CE is 4, and the length for JS is 12.

[tex]4*3=12[/tex]

This means the scale factor is 3. To be sure, let's try the other side.

TC and TE have the same lengths. They are both 5 in length. TS is 15 in length.

[tex]5*3=15[/tex]

This confirms that the scale factor is 3.

The equation of the dilated line is 9x + 15y = 10.

In Geometry, a scale factor can be defined as the ratio of two corresponding side lengths or diameter in two similar geometric objects, which can be used to either vertically or horizontally enlarge (increase) or reduce (compress) a function representing their size.

Generally speaking, the transformation rule for the dilation of a geometric object or equation based on a specific scale factor of 3 is given by this mathematical expression:

(x, y)      →    (SFx, SFy)

Where:

Therefore, the transformation rule for this dilation is given by;

(x, y)      →    (3x, 3y)

3(3x + 5y) = 10

9x + 15y = 10.

Read more on dilation here: https://brainly.com/question/16814005

#SPJ1

The expressions for [tex]x^6[/tex] can be varied, one such basic expression is [tex](x^n)^m[/tex], where n and m are positive integers equal to 2 and 3.

A grouping of numbers, variables, and operations like addition, subtraction, multiplication, division, exponentiation and more is known as an expression. A single number or variable can be an expression it can also include a combination of terms or functions.

By simplifying the [tex]x^6[/tex] we can get the expression-

[tex]x^6=(x^2)^3 \\\\x^6=(x^3)^2\\\\x^6=x^2 * x^4 \\\\x^6=(x^2 + 1 - 1)^6\\\\x^6=(x^3 - x^2 + x - 1 + 1)^2[/tex]

all these expressions represent [tex]x^6[/tex].

Learn more about integers at:

brainly.com/question/15276410

#SPJ1

Answer:

The result for the difference in lung cancer worry between males and females was not statistically significant in Hahn's (2017) study (t(45)=0.69, p > 0.05). The results for the differences in worry between smokers and nonsmokers, and those who did and did not graduate high school, were statistically significant with p values less than 0.05.

Step-by-step explanation:

Answer: Linear

Step-by-step explanation:

I can tell from the table because there is a difference of 4 between each y value.

I dont know what the other blanks will be because i cant see the options. But it shouldnt be too hard to fill out

The coordinates of the focus of the parabola y = -(1/8)x² - 2x - 4 is (-8, 2).

y = -(1/8)x² - 2x - 4

Given by the equation y = -(1/8)x² - 2x - 4,

To find the focus of the parabola we first need to put the equation in standard form:

y = a(x - h)² + k

Where (h, k) is the vertex of the parabola, and a is a constant that determines the shape and size of the parabola.

Completing the square on the x terms, we get:

y = -(1/8)(x² + 16x + 64) - 4 + 8

= -(1/8)(x + 8)² + 4

Comparing this to the standard form, we see that the vertex is (-8, 4) and a = -1/8.

Since the coefficient of x² is negative, the parabola opens downwards.

The focus of the parabola is located at a distance of 1/(4a) units from the vertex, on the axis of symmetry, which is a vertical line passing through the vertex.

Substituting the value of a, we get:

= 1/(4a)

= 1/(4(-1/8))

= 2

Therefore, the focus of the parabola is located 2 units below the vertex, on the line x = -8.

So the focus has coordinates (-8, 2).

Learn more about parabola here: https://brainly.com/question/31142122

#SPJ1

The value of reserve rate is 5%

Given that;

Solitary savings bank received initially amount of $2000.

Now, Let x% percent be kept as reserve then (100-x)% will be loaned out which would be deposited in other bank.

The other bank would keep x% of (100 - x) and again loan the remaining amount.

Thus the total deposits of this cycle would be a geometric series as

⇒ 2000[1 + (100 - x)% + (100 - x)²%+(100-x)² +...]

Here common ratio is,

(100 - x) / 100 = 1 - 0.01x <

for all possible x

This series is infinite and sum of this would be

= sum of geometric series

= 2000 (1/ (x/100)

= 200000/x

This is given as, 40000

Hence, equate and simplify to get;

⇒ x = 5%

So, The value of reserve rate is 5%

Learn more about the percent visit:

https://brainly.com/question/24877689

#SPJ1

To calculate the three-sigma control limits, we first need to find the mean and standard deviation of the sample.

Here, we have,

The mean is:

μ = (4 + 12 + 16 + 8 + 9 + 6 + 5 + 12 + 15 + 7 + 6 + 4 + 2 + 11) / 14 = 8.071

The standard deviation is calculated using the standard deviation formula and is arrived at:

σ = 4.319

The three-sigma control limits are:

Upper control limit = μ + 3σ = 8.071 + (3 × 4.319) = 20.027

Lower control limit = μ - 3σ = 8.071 - (3 × 4.319) = -3.886

b. We can check if the process is in control by looking at whether any of the data points fall outside of the control limits.

From the given data, we can see that the maximum number of complaints is 16, which is well within the upper control limit of 20.027. The minimum number of complaints is 2, which is also well within the lower control limit of -3.886.

Therefore, based on the given data, we can conclude that the process is in control.

Learn more about mean and standard deviation here:

brainly.com/question/28108712

#SPJ1

The essay, "I, Pencil," illustrates that production of an ordinary wood pencil used for writing d. involves the cooperative efforts of millions of people, whose actions are directed through markets.

I, Pencil, an essay by Leonard Read portrays that the manufacture of a common wood pencil utilized for writing necessitates the collective efforts of millions of human beings whose activities are strictly regulated through markets.

The paper conveys that though an ordinary pencil looks like such a straightforward item, it is actually created from a complex system of people, procedures, and materials from far and wide. From timber harvesters who procure the wood, to the miners who take graphite out from the ground, to the employees in manufacturing plants who produce the finished article, the lead holder necessitates the orderly collaboration of multiple individuals and enterprises.

Find out more on I, Pencil at https://brainly.com/question/18514944

#SPJ1

Answer:

C is correct because parallel lines cut by a transversal form congruent alternate interior angles.

Answer:

The common ratio is 5.

30 ÷ 5 = 6.

Let n = 1 be the first term of this sequence.

[tex]a(n) = 6( {5}^{n} )[/tex]

6,000 mL is equal to 6 litres

A unit of measurement is a definite magnitude of a quantity, defined and adopted by convention or by law, that is used as a standard for measurement of the same kind of quantity.

We know that 6,000 mL  is equal to 6L

One litre is equal to 1000 ml

1 l = 1000 ml

6 l=6000 ml

Hence,  6,000 mL is equal to 6 litres

To learn more on Unit of Measurement click:

https://brainly.com/question/15402847

#SPJ1

Answer:

One.

Step-by-step explanation:

This polynomial has only one variable, which is x*. We can treat z and 7 as constants. Therefore, the polynomial is linear and can be written as:

5x* + c

where c = 7 - 3z.

A linear polynomial has either one root (when the coefficient is non-zero) or zero roots (when the coefficient is zero). Therefore, the given polynomial has exactly one root, which is:

x* = -c/5 = -(7 - 3z)/5 = (3z - 7)/5

Answer:16.484

Step-by-step explanation:

find the area of a regular polygon with n sides and radius r, we can use the formula:

Area = (n * r^2 * sin(2*pi/n)) / 2

where pi is the mathematical constant pi (approximately equal to 3.14159).

Plugging in n = 14 and r = 1, we get:

Area = (14 * 1^2 * sin(2*pi/14)) / 2

= (14 * sin(pi/7)) / 2

≈ 16.484

Therefore, the area of the polygon with 14 sides and a radius of 1 unit is approximately 16.484 square units.

Domain where x is not equal to 3 and a range where y is not equal to 2 for function  (x+5)/(x-3)

Domain = Set of all input values of a function.

range = set of all output values of a function.

Given: Domain:  x≠3 ; range = y≠2

We do not include a value for domain if it makes the expression indeterminant .

Since all the functions in options are fractions, here the denominator does not equal to 0.

But in option C and D, the denominator can be zero if x=3.

So , domain for then it x ∈ R-3

for option C if 2=2(x+5)/(x-3)

x-3=x+5

-3=5 which is not possible

Where as in option D, 2=(x+5)/(x-3)

2x-6=x+5

x=11

Hence, domain where x is not equal to 3 and a range where y is not equal to 2 for function  (x+5)/(x-3)

To learn more on Functions click:

https://brainly.com/question/30721594

#SPJ1

Which function has a domain where x does not =3 and a range where y does not =2? A. f(x)=(x-5)/(x+3) B. f(x)=2(x+5)/(x+3) C. 2(x+5)/(x-3) D. (x+5)/(x-3)

The expansion and simplification of the expression, (3x - 2)(2x² + 5x - 1) is 6x³ + 11x² - 13x + 2.

In order to expand and simplify an expression, we need to multiply out the brackets and then simplify the resulting expression by collecting the like terms.

Therefore, let's expand and simplify the expression.

Hence,

(3x - 2)(2x² + 5x - 1)

Therefore, let's multiply

(3x - 2)(2x² + 5x - 1)  = 6x³ + 15x² - 3x - 4x² - 10x + 2

6x³ + 15x² - 3x - 4x² - 10x + 2 = 6x³ + 15x² - 4x² - 3x - 10x + 2

6x³ + 15x² - 4x² - 3x - 10x + 2 = 6x³ + 11x² - 13x + 2

learn more on expression here: https://brainly.com/question/28400521

#SPJ1

The graph that correctly shows the boundary line for y ≤ 2x − 4, is B. Graph B.

The inequality y ≤ 2x − 4, shows that the y - intercept is - 4. What this means is that the boundary line must pass through ( 0, - 4 ). As Graphs C and D do not cross ( 0, - 4 ), neither of them can be the boundary line.

Also, when representing an inequality on a graph, the signs of ≤ and ≥ are presented with a solid line. > and < are the ones presented with a broken line. This means that Graph A cannot the boundary line for the inequality.

Find out more on graphs at https://brainly.com/question/24372553

#SPJ1

Answer:

I think its 221

Step-by-step explanation:

Answer:

Step-by-step explanation:The function y=log(x) is translated 1 unit right and 2 units down.

(1) F(s) = 5+1 / (s^2 + 28s + 2)

To perform partial fraction expansion, we first need to factor the denominator:

s^2 + 28s + 2 = (s + 14 - sqrt(194))(s + 14 + sqrt(194))

We can then write:

F(s) = A / (s + 14 - sqrt(194)) + B / (s + 14 + sqrt(194))

where A and B are constants to be determined.

Multiplying both sides by the denominator and simplifying, we get:

5+1 = A(s + 14 + sqrt(194)) + B(s + 14 - sqrt(194))

Setting s = -14 - sqrt(194), we get:

5+1 = B(2sqrt(194))

Solving for B, we get:

B = (5+1) / (2sqrt(194))

Setting s = -14 + sqrt(194), we get:

5+1 = A(2sqrt(194))

Solving for A, we get:

A = (5+1) / (2sqrt(194))

Thus, the partial fraction expansion of F(s) is:

F(s) = [(5+1) / (2sqrt(194))] / (s + 14 + sqrt(194)) + [(5+1) / (2sqrt(194))] / (s + 14 - sqrt(194))

To find the inverse Laplace transform, we can use the table of Laplace transforms or MATLAB. Using MATLAB, we get:

ilaplace(F(s)) = (5+1) / (2sqrt(194)) * (exp(-14t) / sqrt(194)) * (cosh(sqrt(194)t) + sinh(sqrt(194)t))

(2) F(s) = s^2 + 3s + 1 / (s + 2)(s^2 + 8s + 1)

To perform partial fraction expansion, we first need to factor the denominator:

s^2 + 8s + 1 = (s + 4 - sqrt(15))(s + 4 + sqrt(15))

We can then write:

F(s) = A / (s + 2) + B / (s + 4 - sqrt(15)) + C / (s + 4 + sqrt(15))

where A, B, and C are constants to be determined.

Multiplying both sides by the denominator and simplifying, we get:

s^2 + 3s + 1 = A(s + 4 - sqrt(15))(s + 4 + sqrt(15)) + B(s + 2)(s + 4 + sqrt(15)) + C(s + 2)(s + 4 - sqrt(15))

Setting s = -4 + sqrt(15), we get:

-4 + sqrt(15) = A(-4 + sqrt(15) + 4 + sqrt(15))

Solving for A, we get:

A = (-4 + sqrt(15)) / (2sqrt(15))

Setting s = -4 - sqrt(15), we get:

-4 - sqrt(15) = A(-4 - sqrt(15) + 4 + sqrt(15))

Solving for A, we get:

A = (-4 - sqrt(15)) / (-2sqrt(15))

Setting s = -2, we get:

-1 = B(-2)(-2 + 4 + sqrt(15))

Solving for B, we get:

B = (-1) / (2sqrt(15) + 4)

Setting s =

Answer: Given the following equations, determine the x value(s) that result in an equal output for both functions. f(x) = 3* g(x)=4x+1. C0 and 2.

Step-by-step explanation:

Given the following equations, determine the x value(s) that result in an equal output for both functions. f(x) = 3* g(x)=4x+1. C0 and 2.