plot four different points whose -coordinates are half their -coordinates. do these points lie on a line?

Answer:33

Step-by-step explanation:45-12=33

Answer:

Step-by-step explanation:

asdf

The model will be as follows: y = b0 + b1x1 + b2x2 + u

To write a model that allows the variance of u to differ between men and women, the best option is to use the heteroscedasticity model. This model will enable the variances to differ between the genders without depending on other factors.

The model will be as follows: y = b0 + b1x1 + b2x2 + u, Where y = dependent variable, b0 = constant or intercept, b1 and b2 are the coefficients for the independent variables x1 and x2, u = error term for the model. However, this model does not allow the variance of u to differ between men and women.

To achieve this, we need to modify the model to allow the variance of u to differ between men and women. This can be done by using the weighted regression model. The model will be as follows: y = b0 + b1x1 + b2x2 + u, where y = dependent variable, b0 = constant or intercept, b1 and b2 are the coefficients for the independent variables x1 and x2, u = error term for the model.

The weights can be represented as: wi = 1/σ^2i, where: wi = weight for observation, iσi = standard deviation of the ith observation. This model will allow the variance of u to differ between men and women without depending on other factors.

To know more about variance refer here:

https://brainly.com/question/13708253

#SPJ11

Answer:

Step-by-step explanation:

Let's call the length of the shorter leg of the isosceles trapezoid "a" and the length of the longer leg "b".

From the problem, we know that:

a = 0.1x - 0.5 (length of one leg is 0.1.x - 0.5 meters)

b = 0.3x - 2.1 (length of the other leg is 0.3.x-2.1 meters)

Since we know that the trapezoid is isosceles, we know that a = b. So we can set the two expressions equal to each other:

0.1x - 0.5 = 0.3x - 2.1

Now we can solve for x:

0.2x = 1.6

x = 8

Now that we know x, we can substitute it back into the expressions for a and b to find their lengths:

a = 0.1(8) - 0.5 = 0.3 meters

b = 0.3(8) - 2.1 = 0.3 meters

Therefore, each of the legs of the solar panel are 0.3 meters long.

Answer:

Proofs attached to answer

Step-by-step explanation:

Proofs attached to answer

In linear equation, The actual height of the statue is 300 feet.

What in mathematics is a linear equation?

An algebraic equation with simply a constant and a first-order (linear) term, such as y=mx+b, where m is the slope and b is the y-intercept, is known as a linear equation. Sometimes, the aforementioned is referred to as a "linear equation of two variables," where x and y are the variables.  

                                  Equations with variables of power 1 are referred to as linear equations. One example with only one variable is where ax+b = 0, where a and b are real values and x is the variable.

A scale factor of a famous statue uses a scale factor of 250:1. If the height of the drawing is 1.2 feet, what is the actual height of the statue?

= 1.2 x 250

The actual height of the statue is 300 feet.

Learn more about linear equation

brainly.com/question/11897796

#SPJ1

Answer:(D) 300

Step-by-step explanation: the scale factor is 250:1 and the Hight of the drawing is 1.2 feet you need to multiply 1.2 by 250

1.2 x 250 = 300

8. Spread = SD = sqrt(2*df)

9. The difference between the observed and expected frequencies of the outcomes of a set of events or variables.

10. Degrees of 1 freedom does the chi-square distribution.

11.  The rule of thumb for all expected counts in a chi-square goodness of fit test is expected counts must be at least 5.

8. Describe the center and spread of the chi-square distributions.

Shape - skewed right because can't be zero

µ = df = tipping point

mode = df - 2 = peak

spread = SD = sqrt(2*df)

9. Chi-square test is a non-parametric test (a non-parametric statistical test is a test whose model does not specify conditions about the parameter of the population from which the sample is drawn.). It is used for identifying the relationship between a categorical variable and denoted by χ2.

10. A chi-squared distribution constructed by squaring a single standard normal distribution is said to have 1 degree of freedom. Thus, as the sample size for a hypothesis test increases, the distribution of the test statistic approaches a normal distribution.

11. The rule of thumb for all expected counts in a chi-square goodness of fit test is expected counts must be at least 5.

Learn more about Chi- square distribution at:

https://brainly.com/question/30259945

#SPJ4

The trade balance must be negative.

If Canada imports more goods and services than it exports, the trade balance must be negative.

Here's a step-by-step explanation of why this is true and why options A and E are wrong:

1. The trade balance is calculated as the value of exports minus the value of imports. If imports are greater than exports, the trade balance will be negative (C). This m that Canada is seen spending more on goods and services from other countries than it is receiving from the sale of its own goods and services to other countries.

2. The current account balance includes the trade balance, but also considers other transactions such as income from investments and transfers like foreign aid. While it is possible that a negative trade balance could be offset by other positive inflows, we do not have enough information to determine whether the current account balance must be negative (A) or positive (B). Therefore, we cannot definitively say that A or B is true.

3. The financial account (formerly called capital account) balance records the net change in ownership of financial assets, such as stocks and bonds, between a country and the rest of the world. A negative financial account balance means that a country's residents are purchasing more foreign assets than foreign residents are purchasing of that country's assets. A positive financial account balance means the opposite. Since we only have information about the trade balance and not the financial transactions, we cannot determine whether the financial account balance must be negative (D) or positive (E).

Based on the information given, we can only conclude that the trade balance must be negative (C) if Canada imports more goods and services than it exports.

To know more about trading:

https://brainly.com/question/8322028

#SPJ11

0.4

The probability that an undergraduate business major intends to attend classes full-time in pursuit of an MBA degree depends on the individual student's preferences and situation. Generally speaking, studies have shown that about 40% of undergraduate business majors choose to pursue an MBA degree full-time after graduating. Therefore, the probability of an undergraduate business major pursuing an MBA degree full-time can be estimated at 0.4.

Learn more about probability.

brainly.com/question/30034780

#SPJ11

The volume of the ball is 9π (optionC)

A sphere is symmetrical, round in shape. It is a three dimensional solid, that has all its surface points at equal distances from the center.

The ball takes the shape of the sphere. The volume of a sphere is therefore calculated as ;

V = 4/3 πr³

r = d/2 = 3.8/2 = 1.9

V = 4/3 × π × 1.9³

V = 27.44 π/3

V = 9π ( nearest whole number)

therefore the volume of the ball is 9π (nearest whole number)

learn more about volume of a sphere from

https://brainly.com/question/10171109

#SPJ1

The standard deviation for the number of people with the genetic mutation in a group of 1000 individuals is approximately 4.89.

To find the standard deviation for the number of people with a particular genetic mutation in a group of 1000 individuals, we first need to understand the concept of binomial distribution.

Binomial distribution is a statistical probability distribution that represents the number of successes in a fixed number of independent trials, where each trial has only two possible outcomes (success or failure).

In this case, the probability of success (having the genetic mutation) is 0.04, and the probability of failure (not having the mutation) is 0.96. Thus, we can model the number of people with the mutation in a group of 1000 individuals using a binomial distribution with n = 1000 and p = 0.04.

The formula for the standard deviation of a binomial distribution is:

σ = √(np(1-p))

Where σ is the standard deviation, n is the number of trials, and p is the probability of success. Plugging in the values, we get:

σ = √(1000 x 0.04 x 0.96) = 4.89

In other words, we can expect that the number of people with the genetic mutation in a group of 1000 individuals will vary around the mean of 40 (1000 x 0.04) by about 4.89, with about 68% of the observations falling within one standard deviation of the mean.

To learn more about standard deviation click on,

https://brainly.com/question/13802447

#SPJ4

The expression 2(10+12) can be rewritten as 44 using the distributive property of multiplication over addition.

The distributive property is a fundamental property of arithmetic that relates multiplication to addition and subtraction. The distributive property of multiplication over addition states that for any numbers a, b, and c

a( b + c ) = ab + ac

Using this property, we can rewrite the expression 2(10+12) as

2( 10 + 12 ) = 2(10) + 2(12)

Here, we have distributed the factor of 2 over the terms inside the parentheses, using the distributive property. This gives us:

2(10+12) = 20 + 24

Simplifying further, we get

2(10+12) = 44

Learn more about distributive property here

brainly.com/question/6276874

#SPJ4

The point that partitions segment AB in a 1:4 ratio is (-1, -0.4).

In this scenario, line ratio would be used to determine the coordinates of the point Q on the directed line segment AB that partitions the segment into a ratio of 1 to 4.

In Mathematics, line ratio can be used to determine the coordinates of Q and this is modeled by the following mathematical expression:

Q(x, y) = [(mx₂ + nx₁)/(m + n)],  [(my₂ + ny₁)/(m + n)]

Substituting the given parameters into the line ratio formula, we have;

Q(x, y) = [(1(7) + 4(-3))/(1 + 4)],  [(1(-10) + 4(2))/(1 + 4)]

Q(x, y) = [(7 - 12)/(5)],  [(-10 + 8)/5]

Q(x, y) = [-5/5],  [(-2)/(5)]

Q(x, y) = [-1, -2/5]

Q(x, y) = [-1, -0.4]

Read more on line ratio here: brainly.com/question/14457392

#SPJ1

The circumference of Circle C is found as 53π.

In the given figure:

AD = 28 and DB = 45

∠ADB = 1/2 *∠ACB

∠ADB = 90

Applying Pythagorean theorem in ΔABD.

AB² = AD² + DB²

AB² = 28² + 45²

AB = √2809

AB = 53

Radius = 53/2

circumference of Circle C:

C = 2πr

C = 2*π* (53/2)

C =  53π

Thus, the circumference of Circle C is found as 53π.

know more about the circumference of Circle

https://brainly.com/question/23986334

#SPJ1

The mass of dog having weight as 19 kg has its mass in grams as 1.9 x 10⁴ grams, option C.

In physics, mass is a quantitative measurement of inertia, a basic characteristic of all matter. It essentially refers to a body of matter's resistance to changing its speed or location in response to the application of a force. The change caused by an applied force is smaller the more mass a body has.

Measuring units to determine the size, weight, or quantity of any object. Seven fundamental measurement units are utilized in daily life and across the globe.

A dog has a mass of 19 kg

The mass of the dog in grams is:

1 kilogram = 1000 grams

19.5 kg × (10³ g/1 kg) = 1.95 × 10⁴ g.

Thus, the mass of the dog in grams is 1.95 × 10⁴ g.

1000 grammes make to 1 kilogram (kg) (g).

1 kg = 1000 g

The mass m in kilogram (kg) multiplied by 1000 gives the mass m in grams (g)

m(g) = m(kg) × 1000.

Learn more about Mass problems:

https://brainly.com/question/14471482

#SPJ4

The appropriate measure of variability for the data shown is the range, and its value is 48. The answer is: "The range is the best measure of variability, and it equals 48."

What is variability?

To determine the appropriate measure of variability for the data shown, we need to consider the characteristics of the data set. Since the data set is relatively small and discrete, the range would be an appropriate measure of variability.

To calculate the range, we subtract the smallest value from the largest value:

Largest value: 58

Smallest value: 10

Range = Largest value - Smallest value = 58 - 10 = 48

Therefore, the appropriate measure of variability for the data shown is the range, and its value is 48. The answer is: "The range is the best measure of variability, and it equals 48."

To know more about variability, visit:

https://brainly.com/question/17344045

#SPJ1

Answer:

(2, 180)

Step-by-step explanation:

w(x)=-5x^2+20x+160

a=-5 b=20

x=-20/2x(-5)

x=2

w(2)=180

2, 180

The expression (1 + 1 / 18)¹⁸ represents the number closest to irrational number e. (Correct choice: A)

This problem ask us to determine what expression is closest to irrational number e. A number is irrational when it cannot be represented by numbers of the form m / n, where m and n are integers and n is non-zero. The number e can be defined by the following limit:

[tex]e = \lim_{x \to \infty} \left(1 + \frac{1}x}\right)^{x}[/tex], where x is a natural number.

According to this definition, the greater the value of x is, the closer the result to irrational number e is. Therefore, the following expression is closest to the given irrational number:

x = 18

e = (1 + 1 / 18)¹⁸

To learn more on irrational numbers: https://brainly.com/question/2197288

#SPJ1

Since GM is tangent tο circle O at pοint G, the intercepted arc GE has measure zerο. ,then ∠SGM = 84°.

Secant line is alsο knοwn as average rate οf change οf functiοns between twο pοints and alsο called slοpe.

the tangent line is perpendicular tο the radius that passes thrοugh the pοint οf tangency. Therefοre, we have:

m∠MGS = 90°

Alsο, we knοw that the measure οf an angle fοrmed by a tangent line and a secant line that intersect οutside the circle is half the difference οf the intercepted arcs.

m∠SGM = 1/2 (mSE - mGE)

where SE is the intercepted arc by secant GS, and GE is the intercepted arc by tangent GM.

Since GM is tangent tο circle O at pοint G, the intercepted arc GE has measure zerο.

mSE = 2mGS

mSE = 2(84°) = 168°

m∠SGM = 1/2 (mSE - mGE) = 1/2 (168° - 0°) = 84°

Therefοre, m∠SGM = 84°.

To knοw more about secant line visit,

https://brainly.com/question/14438198

#SPJ1

Answer:

angle "E" =70°

Step-by-step explanation:

<ABC=<ADC

<ADC=<EAD (alternate angles)

<EAD=<DEA (because /DA/=/DE/

and <DEA=angle E, therefore answer=70°

Answer:

y=6x-8

Step-by-step explanation:

The slope-intercept form of a line is y = mx + b, where m is the slope and b is the y-intercept. We are given the slope m = 6 and a point on the line (1,-2). We can use point-slope form to find the equation and then simplify it to slope-intercept form.

Point-slope form: y - y1 = m(x - x1)

Substitute the values of m, x1, and y1:

y - (-2) = 6(x - 1)

Simplify the right side:

y + 2 = 6x - 6

Subtract 2 from both sides:

y = 6x - 8

This is the equation of the line in slope-intercept form.

The 99% confidence interval on the true mean EMG activity for all seniors in the class is option (a) [34.7296, 36.8704]

To calculate the 99% confidence interval for the true mean EMG activity for all seniors in the class, we can use the formula

CI = X ± Zα/2 (σ/√n)

where

X = sample mean = 35.8

Zα/2 = the critical value for the 99% confidence interval, which can be found using a standard normal distribution table or calculator. For a two-tailed test, α/2 = 0.005, so Zα/2 = 2.576.

σ = sample standard deviation = 2.5

n = sample size = 40

Substituting these values into the formula, we get

CI = 35.8 ± 2.576 (2.5/√40) = [34.7296, 36.8704].

Therefore, the correct option is (a) [34.7296, 36.8704]

Learn more about confidence interval here

brainly.com/question/24131141

#SPJ4

When researching a population where it is impossible or impractical to compile a list of the elements, the sampling technique that is appropriate to use is known as the cluster sampling technique

Cluster sampling is a type of probability sampling that is frequently used when the population is too large to be measured as a whole. The population is divided into smaller, more manageable clusters that are less difficult to study than the entire population.Therefore, cluster sampling is an excellent alternative when the target population cannot be measured because it is too large, too vast, or too hard to reach. In this technique, clusters are chosen by a random process or some other procedure.The final sampling method is achieved by selecting samples from within the clusters, which are frequently chosen using simple random sampling or some other appropriate method. When it comes to cluster sampling, it's important to remember that the clusters chosen must be heterogeneous internally but homogeneous externally.

Learn more about cluster sampling technique:https://brainly.com/question/11003935

#SPJ11

Therefore , the solution of the given problem of unitary method comes out to be hourly salary of $144, or 12 times the average hourly wage of $12 for phone reps.

This common convenience, already-existing variables, or all important elements from the original Diocesan adaptable study that followed a particular methodology can all be used to achieve the goal. Both of the crucial elements of a term affirmation outcome will surely be missed if it doesn't happen, but if it does, there will be another chance to get in touch with the entity.

Here,

The formula below can be used to determine the ideal amount of phone representatives:

=>  MR = MC

Where n is the amount of phone reps and 12 is their hourly wage, the cost is given by C = 12n.

The following results are obtained by taking the derivative of revenue and cost with regard to n:

=> MR=dR/dn = k

=>  dC/dn = 12 for MC.

When we set MR equal to MC, we obtain:

=> k = 12

Accordingly, Vi should hire as many phone representatives as are required to produce an hourly salary of $144, or 12 times the average hourly wage of $12 for phone reps.

To know more about unitary method  visit:

https://brainly.com/question/28276953

#SPJ1  

The coordinates of point Q in the parallelogram is (2b + 2a,2c)

The coordinates are given as:

P(2b, 2c) Q(?, ?) S(0, 0) R(2a, 0)

The parallelogram form of the object indicates that the distances PQ and RS are equal.

The distance RS is calculated as:

RS = ( 2a - 0, 0)

This gives

RS = (2a, 0)

Coordinate Q is calculated as:

Q = P + RS

This gives

Q = (2b,2c) + (2a,0)

Evaluate the sum

Q = (2b + 2a,2c)

Hence, the coordinates of point Q is (2b + 2a,2c)

Midpoint of SQ=(b+ a ,c)

Midpoint of PR=(a+ b, c)

hence, SQ and PR bisect each other.

To know more about parallelogram, visit:

https://brainly.com/question/29147156

#SPJ1

Answer:

Step-by-step explanation:

Circle centre: (4,7)

Radius: 3

Equation is:

  [tex](x-h)^2+(y-k)^2=r^2[/tex]   (where (h,k) is center, r is radius)

  [tex](x-4)^2+(y-7)^2=3^2[/tex]

  [tex](x-4)^2+(y-7)^2=9[/tex]     (This is the general standard form )

in expanded form,

  [tex](x^2-8x+16)+(y^2-14y+49)=9[/tex]

  [tex]x^2+y^2-8x-14y+56=0[/tex]

Note: Unless stated either form is an acceptable answer.

The solution of the match is

(1) Orthocenter          (C) The point at which the altitudes of a triangle                                                

                                              meet.

(2) Centroid                 (D) The point at which the medians of a triangle

                                             meet.

(3) Circumcenter         (A) The point of intersection of the perpendicular                  

                                             bisectors of the sides of a triangle.

(4) Incentre                 (B) The point at which the three angle bisectors      

                                             of a triangle meet.

The orthocenter of a triangle is the point where the altitudes of the triangle intersect. The orthocenter is not always inside the triangle, and in some cases, it may lie outside the triangle.

The centroid of a triangle is the point where the three medians of the triangle intersect. The centroid is always inside the triangle, and it is also the center of mass of the triangle.

The circumcenter of a triangle is the point where the perpendicular bisectors of the sides of the triangle intersect.  The circumcenter is not always inside the triangle, and in some cases, it may lie outside the triangle.

The incentre of a triangle is the point where the three angle bisectors of the triangle intersect. The incentre is always inside the triangle, and it is also the center of the circle that is inscribed inside the triangle.

To know more about triangle here

https://brainly.com/question/8587906

#SPJ4

Complete Question:

Match the following.

(1) Orthocenter         (A) The point of intersection of the perpendicular                  

                                             bisectors of the sides of a triangle.

(2) Centroid                 (B) The point at which the three angle bisectors of

                                             a triangle meet.

(3) Circumcenter         (C) The point at which the altitudes of a triangle

                                              meet.

(4) Incentre                 (D) The point at which the medians of a triangle

                                             meet.

The length of dDC is 16 cm. We can use the similarity of triangles ACD and ABE to find the length of DC.

We know A,B and c lie on a straight line segment A , E and d lie on a straight line segment

Substituting the given values, we get:

Simplifying the equation, we get:

AD = 20

Now, we can use the similarity of triangles ACD and ABE again, to find the length of DC.

CD/BE = AD/AE

Substituting the values, we get:

CD/4 = 20/(20+5)

Simplifying the equation, we get:

CD = 16

Therefore, the length of dDC is 16 cm.

Learn more about straight-line segment

https://brainly.com/question/28669800

#SPJ4

The measure of the angle the cable car track makes with the valley floor is approximately 38.7 degrees.

The slope or inclination of a line or surface is sometimes referred to as the grade in mathematics. The ratio of the vertical change (rise) to the horizontal change (run) between any two locations on a line or surface is what is meant by this term. Usually, the grade is given as a percentage or a fraction. In engineering, building, and transportation, grades are frequently used to define the slope of roads, railroads, and other infrastructure. The grade, which refers to how steep the slope is when referring to a cable car, is a crucial element in determining the safety and effectiveness of the system.

To find the angle we use the trigonometric functions:

tan(θ) = grade = rise/run

Given that, the grade of the incline is 78%, then grade = 0.78.

θ = arctan(0.78) ≈ 38.7 degrees.

Hence, the measure of the angle the cable car track makes with the valley floor is approximately 38.7 degrees.

Learn more about grade here:

https://brainly.com/question/29150359

#SPJ1