polar covalent bonds are formed when the electrons in the bond are not shared equally between the two nuclei. which one of these molecules contains polar bonds?

Answer : There are 5 water molecules per formula unit of the hydrate.

In order to calculate the number of water molecules in a hydrate, we first need to understand what a hydrate is. A hydrate is a compound that contains water molecules bound within its crystal structure. The water molecules are referred to as “water of hydration” and are typically present in a fixed ratio to the other molecules in the compound.

The formula for a hydrate can be written as: AxBy * zH2O, where x and y represent the number of ions in the anhydrous salt and z represents the number of water molecules per formula unit. In order to calculate z, we need to use the information provided in the question. The question tells us that we have 0.02 mol of anhydrous salt and 0.1 mol of water in the sample. we need to divide the number of moles of water by the number of moles of anhydrous salt.

0.1 mol of water / 0.02 mol of anhydrous salt = 5. This means that for every mole of anhydrous salt, there are 5 moles of water. Therefore, the formula for the hydrate can be written as: AxBy * 5H2O. This means that there are 5 water molecules per formula unit of the hydrate. Therefore, z is equal to 5.

Know more about hydrate here:

https://brainly.com/question/11202174

#SPJ11

The molarity of the first solution containing 0.500 mol of NaOH in 2.30 l of the solution is 0.217 M.

The molarity of a solution is defined as the number of moles of solute per liter of solution. In order to calculate the molarity of the given solution, we need to divide the number of moles of solute by the volume of the solution given in liters. Using the formula for molarity, we have;

Molarity = Number of moles of solute / Volume of solution in liters

Given, Number of moles of solute = 0.500 mol

Volume of solution = 2.30 L

Substitute the values of the given information into the molarity formula; Molarity = 0.500 mol / 2.30 L = 0.217 M

You can learn more about molarity at: brainly.com/question/16727614

#SPJ11

The most likely identity of the unknown gas that effuses taking 37s is Oxygen(O₂).

Since the unknown gas effuses out faster, it must be lighter than Xe.

The most likely identity of the unknown gas can be determined using Graham's Law of Diffusion. According to this, the time taken for effusion/diffusion of two different gases under identical conditions is directly proportional to the square roots of their densities or molecular masses. It is given as:

t₂/t₁ = √(M₂/M₁)

where t₂,t₁ are the times taken and M₂, M₁ are the molecular masses.

This ratio is determined by the ratio of the molecular weights of the unknown gas and the sample of Xe. The heavier the molecular weight, the slower the rate of effusion.

Rearranging and plugging in the values as t₂= 75s, t₁= 37s,  M₁= 131g (for Xe), we get M₂ as follows:

M₂= (37/75)² x 131 = 31.8 ≈ 32g

32g corresponds to the molecular weight of O₂ and it is lighter than Xe.

Therefore, the unknown gas that effuses out of the container faster than the sample of Xe, resulting in the unknown gas taking 37 seconds, and the sample of Xe taking 75 seconds is oxygen(O₂).

To know more about effusion, refer here:

https://brainly.com/question/2655041#

#SPJ11

In 1.2 x [tex]10^{24}[/tex] formula units of [tex]Li_{2} (SO)_{4}[/tex], there are roughly 1.993 moles of

[tex]Li_{2} (SO)_{4}[/tex].

Using Avogadro's number, or 6.022 x [tex]10^{23}[/tex] molecules/mol, we can calculate the number of moles of Li2SO4 in 1.2 x [tex]10^{24}[/tex]formula units.

First, we need to figure out how many moles of [tex]Li_{2} (SO)_{4}[/tex]  are needed to equal 1.2 x [tex]10^{24}[/tex]  formula units:

Formula units equal 6.022 x [tex]10^{23}[/tex] per mole of [tex]Li_{2}(SO)_{4}[/tex].

As a result, there are: 1.2 x [tex]10^{24}[/tex] moles of [tex]Li_{2}(SO)_{4}[/tex] in the formula units.

1.993 moles are equal to 1.2 x [tex]10^{24}[/tex] formula units / 6.022 x [tex]10^{23}[/tex] formula units/mol.

Hence, 1.2 × [tex]10^{24}[/tex] formula units of [tex]Li_{2} (SO)_{4}[/tex] contain about 1.993 moles.

To learn more about moles visit:

brainly.com/question/26416088

#SPJ9

(a) We would need 7 pies to serve a slice of pie with each cup of hot chocolate.

(b) There would be 6 slices of pie left over.

From item 6, we know that there are 50 cups of hot chocolate to be served.

Since each pie can be cut into 8 slices, we would need to serve 50/8 = 6.25 pies.

Since we cannot serve a fractional pie, we would need to round up to the next whole number of pies, which is 7.

To find out how many slices of pie would be left over, we need to calculate the total number of slices of pie and subtract the number of slices used to serve the hot chocolate.

Total number of slices of pie = 7 pies x 8 slices per pie = 56 slices

Number of slices used to serve the hot chocolate = 50 slices

Therefore, the number of slices of pie left over would be:

56 slices - 50 slices = 6 slices

Learn more about pieces of pie here: https://brainly.com/question/11694372

#SPJ1

The given statement "every atom in the universe emits energy in the form of a nucleus" is False.

In the universe, every atom does not emit energy in the form of a nucleus. It is not true in the case of every atom in the universe. But it is true that every atom in the universe emits energy.

According to the Bohr model of the atom, an electron orbiting an atomic nucleus emits radiation when it changes its energy level. The radiation emitted by the electron is in the form of a photon of electromagnetic energy. This is a spontaneous process and it is called spontaneous emission. It can be said that every atom in the universe emits energy.

Therefore, it is false that every atom in the universe emits energy in the form of a nucleus.

To know more about the atom, refer here:

https://brainly.com/question/1566330#

#SPJ4

The partial pressure of CH₄ in the mixture is 239 torr.

We can use the mole fraction of methane (CH4) to calculate its partial pressure in the mixture. First, we need to convert the masses of each component into moles:

moles of CH₄ = 90.0 g / 16.04 g/mol = 5.61 mol

moles of Ar = 10.0 g / 39.95 g/mol = 0.250 mol

Next, we can calculate the total moles of gas in the mixture,

total moles = moles of CH₄ + moles of Ar = 5.61 mol + 0.250 mol = 5.86 mol

Now we can calculate the mole fraction of CH₄,

mole fraction of CH₄ = moles of CH₄ / total moles = 5.61 mol / 5.86 mol = 0.957

Finally, we can use the mole fraction and total pressure to calculate the partial pressure of CH₄,

partial pressure of CH₄ = mole fraction of CH₄ x total pressure = 0.957 x 250 torr = 239 torr

To know more about mixture, here

brainly.com/question/20853110

#SPJ4

Answer:Gco is 0.953

Explanation:

2.62 moles of glucose can react with 15.7 moles of oxygen. The balanced chemical equation for the combustion of glucose is:

C6H12O6 + 6O2 → 6CO2 + 6H2O

From the equation, we can see that for every mole of glucose that reacts, 6 moles of oxygen are required. Therefore, the number of moles of glucose that can react with 15.7 moles of oxygen can be calculated as follows:

Number of moles of glucose = (Number of moles of oxygen) / 6

Number of moles of glucose = 15.7 / 6

Number of moles of glucose = 2.62

Therefore, 2.62 moles of glucose can react with 15.7 moles of oxygen.

To know more about oxygen, visit :

https://brainly.com/question/13370320

#SPJ1

The molarity of the solution prepared by mixing 100.0 ml of the solution made in number 3 with 900.0 ml of 0.0250 m NaCl is 0.1225 M.

We first calculate the moles of NaCl present in 900.0 ml of 0.0250 m NaCl solution.The formula to calculate the moles of solute is given as:

Moles of solute = molarity x volume (in liters)

So, the moles of NaCl in 900.0 ml of 0.0250 m NaCl solution would be:

Moles of NaCl = 0.0250 x (900.0/1000) = 0.0225 mol

Calculate the total volume of the mixed solution.The total volume of the mixed solution would be the sum of the volumes of the two solutions used in the mixing process.Total volume of mixed solution = 100.0 ml + 900.0 ml = 1000.0 ml or 1.0 L

Calculate the total number of moles of NaCl in the mixed solution.Total moles of NaCl in the mixed solution = moles of NaCl in 900.0 ml of 0.0250 m NaCl solution + moles of NaCl in 100.0 ml of the solution made in number 3

Total moles of NaCl in the mixed solution = 0.0225 mol + 0.100 mol = 0.1225 mol

Calculate the molarity of the mixed solution.The molarity of the mixed solution would be the number of moles of solute present in the solution per liter of solution.

Molarity of the mixed solution = Total moles of NaCl in the mixed solution / Total volume of the mixed solution

Molarity of the mixed solution = 0.1225 mol / 1.0 L = 0.1225 M

Therefore, the molarity of the solution prepared by mixing 100.0 ml of the solution made in number 3 with 900.0 ml of 0.0250 m NaCl is 0.1225 M.

More on molarity: https://brainly.com/question/30363118

#SPJ11

The molar mass of the unknown monoprotic organic acid is 180.0 g/mol. by titration. If 6.12 ml of the naoH solution is required to neutralize the sample.

In order to determine the molar mass of the unknown monoprotic organic acid, follow the steps given below:

Step 1:

Calculate the number of moles of NaOH used in the titration by using the formula given below:

n(NaOH) = M(NaOH) × V(NaOH)

= 0.157 mol/L × 0.00612 L

= 9.62 × 10^-4 mol

Step 2:

Calculate the number of moles of the acid used in the titration by using the formula given below:

n(acid) = n(NaOH)

= 9.62 × 10^-4 mol

Step 3:

Calculate the mass of the acid used in the titration by using the formula given below:

mass(acid) = n(acid) × M(acid) = 0.173 gM(acid) = mass(acid) / n(acid)

= 0.173 g / 9.62 × 10^-4 mol

= 180.0 g/mol

Therefore, the molar mass of the unknown monoprotic organic acid is 180.0 g/mol.

For more such questions on molar mass , Visit:

https://brainly.com/question/21334167

#SPJ11

The entropy change per mole of gas is -1.387R.

The entropy change per mole of gas in a process in which an ideal gas is compressed to one-fourth of its original volume at a constant temperature can be calculated as follows:

Let us denote the original volume as V₁, the final volume as V₂, and the number of moles of the gas as n. The entropy change can be calculated using the formula:

ΔS = nR ln (V₂/V₁)

Therefore, the entropy change per mole of gas is given by:

ΔSper mole = R ln (V₂/V₁)

In this case, V₁ = 4V₂ and so,

ΔSper mole = R ln (1/4) = - R ln 4 = -2.303 R log 4 = -1.387R

Thus, the entropy change per mole of gas when an ideal gas is compressed to one-fourth of its original volume at a constant temperature is -1.387R.

To know more about entropy change, refer here:

https://brainly.com/question/4526346#

#SPJ11

The equation for the ionization of a weak acid in water is HA + H₂O ⇌ H₃O⁺ + A⁻, and the equilibrium constant expression for this reaction is K = [H₃O⁺ ][A⁻]/[HA].

The ionization of a weak base in water is B + H₂O ⇌ OH⁻ + BH+, and the equilibrium constant expression for this reaction is K = [OH⁻][BH⁺]/[B].

Weak acids and bases partially dissociate into their ions in aqueous solutions. For a weak acid, HA, the equilibrium expression for its ionization is HA + H₂O ⇌  H₃O⁺  + A⁻, and the corresponding equilibrium constant expression is K = [ H₃O⁺ ][A-]/[HA].

The same process happens with a weak base, B, where the equilibrium expression is B + H₂O ⇌ OH⁻ + BH⁺, and the corresponding equilibrium constant expression is K = [OH⁻][BH⁺]/[B]. Thus, the equations for the ionization of both weak acids and bases and the corresponding equilibrium constant expressions can be

To know more about equilibrium constant  click on below link:

https://brainly.com/question/15118952#

#SPJ11

The equilibrium reaction for the formation of cobalt(II) complex when cobalt(II) chloride is dissolved in ethanol and then water is added is given by the following equation:

CoC₂l + 4 ethanol → Co(C₂H₅OH)₄Cl₂

When the cobalt(II) chloride is dissolved in ethanol, a cobalt(II) complex is formed. The complex is a tetrahedral molecule with four ethanol molecules attached to the cobalt ion. When water is added, it causes the equilibrium reaction to shifting to the right, with more of the cobalt(II) complex being formed. This is because the water molecules can displace the ethanol molecules from the complex, allowing the complex to form. The reaction can be expressed as:

CoC₂H₅OH)₄Cl₂ + 4 H₂O ↔ Co(H₂O)₄Cl₂ + 4 C₂H₅OH

In conclusion, the equilibrium reaction for the formation of cobalt(II) complex when cobalt(II) chloride is dissolved in ethanol and then water is added can be given as:

CoCl₂ + 4 ethanol → Co(C₂H₅OH)₄Cl₂ + 4 H₂O ↔ Co(H₂O)₄Cl₂ + 4 C₂H₅OH.

To know more about cobalt(II) complex, refer here:

https://brainly.com/question/6462267#

#SPJ4

The pressure of the gas is approximately 4.57 atm or 438.629 kPa

The Ideal gas law or general gas equation states that "the pressure multiplied by volume is equal to moles multiply by the universal gas constant multiply by temperature.

It is expressed as;

PV = nRT

Where P is pressure, V is volume, n is the amount of substance, T is temperature and R is the ideal gas constant ( 0.08206 Latm/molK )

Given that;

First, we need to convert the temperature to Kelvin:

T (K) = T (Celsius) + 273.15

T (K) = 93.5 + 273.15

T (K) = 366.65 K

Now we can substitute the given values into the formula:

PV = nRT

P = nRT / V

P = ( 6 × 0.08206 × 366.65 ) / 41.7

P = 4.33 atm

Convert to kPa by multiplying the pressure value by 101.3

P = ( 4.33 × 101.3 ) kPa

P = ( 4.33 × 101.3 ) kPa

P = 438.629 kPa

The pressure is approximately 4.57 atm or 438.629 kPa.

Learn more about Ideal Gas Law here: brainly.com/question/4147359

#SPJ1

The unit of measurement for a surface area that has degrees Fahrenheit as the height and time as the width would be square degrees Fahrenheit x time.

Surface area is a measurement of the total area that the surface of an object occupies. The surface area is measured in square units. If the surface of an object is rectangular or square, it is calculated by multiplying the length of the object by the width of the object. For the curved surfaces, the formula for the surface area is complicated. However, the concept of square units remains the same for curved surfaces.

Fahrenheit is a unit of temperature that is used to measure the temperature of an object. This is used primarily in the United States and other countries that have adopted the Imperial system of units. It is based on a scale of 180 degrees between the freezing and boiling points of water, where the freezing point is 32°F and the boiling point is 212°F.

To learn more about Fahrenheit; https://brainly.com/question/30391112

#SPJ11

The pH of hydroxylamine will be 8.76.

The first step is to write the balanced equation for the reaction of hydroxylamine with water:

NH₂OH + H₂O ⇌ NH₃OH⁺ + OH⁻

The Kb expression for this reaction is:

Kb = [NH₃OH⁺][OH⁻] / [NH₂OH]

We are given the Kb value as 6.6 x 10⁻⁹, so we can use this to find the concentration of hydroxylamine that has been deprotonated:

Kb = [NH₃OH⁺][OH⁻] / [NH₂OH]

6.6 x 10⁻⁹ = x² / (0.050 - x)

Assuming that x is very small compared to 0.050, we can simplify the expression as follows:

6.6 x 10⁻⁹ = x² / 0.050

x² = 3.3 x 10⁻¹⁰

x = 5.7 x 10⁻⁶ M

Now that we have the concentration of hydroxide ions, we can use this to find the pH of the solution:

pOH = -log[OH-] = -log(5.7 x 10⁻⁶) = 5.24

pH = 14.00 - pOH = 8.76

Therefore, the pH of a 0.050 M solution of hydroxylamine is 8.76.

Learn more about pH on:

https://brainly.com/question/172153

#SPJ11

Picric acid and phenol, Salicylic acid and phenol & Benzylamine and aniline can be separated using liquid-liquid extraction but Triethylamine and diethylamine & 3-nitrobenzoic acid and 2-nitrobenzoic acid cannot be separated using liquid-liquid extraction.

1. Picric acid and phenol can be separated using liquid-liquid extraction. Picric acid is a stronger acid (pKa ~0.4) than phenol (pKa ~10). Adding aqueous NaOH will deprotonate picric acid and make it soluble in the aqueous layer, while phenol remains in the organic layer. Then, the two compounds can be separated.
2. Salicylic acid and phenol can also be separated using liquid-liquid extraction. Salicylic acid (pKa ~3) is more acidic than phenol (pKa ~10). Adding aqueous NaHCO3 will deprotonate salicylic acid, making it soluble in the aqueous layer, while phenol remains in the organic layer. The compounds can then be separated.
3. Triethylamine and diethylamine cannot be easily separated via liquid-liquid extraction, as both are bases (pKb values are similar). Aqueous HCl, NaOH, or NaHCO3 will not be effective in separating these compounds. Alternative separation methods, like distillation, may be needed.
4. 3-nitrobenzoic acid and 2-nitrobenzoic acid cannot be separated using liquid-liquid extraction, as they have similar acidity (pKa values are close) and will react similarly with HCl, NaOH, or NaHCO3. Alternative separation methods, like chromatography, should be considered.
5. Benzylamine and aniline can be separated using liquid-liquid extraction. Benzylamine is a weaker base (pKb ~4.2) than aniline (pKb ~9.4). Adding aqueous HCl will protonate aniline, making it soluble in the aqueous layer, while benzylamine remains in the organic layer. The two compounds can then be separated.

To learn more about picric acid; https://brainly.com/question/14866072

#SPJ11

When raising solvent temperature, solvent-solute collisions become more frequent and more energetic.

In chemistry, a solvent is a substance capable of dissolving another substance, usually a solid, liquid, or gas, to produce a homogeneous solution (mixture). The most common solvent is water, although there are other solvents that are widely used in many different industries. In a solvent, a solute is a substance that dissolves. It is usually a solid, but it can also be a liquid or a gas.

When a solute dissolves in a solvent, it forms a homogeneous solution.The solute will dissolve in the solvent when they collide. If the solute is in the solid-state, a solvent-solute collision may only occur if the solute dissolves in the solvent. The rate and frequency of solvent-solute collisions are impacted by a variety of factors, including solvent temperature. When solvent temperature is increased, the kinetic energy of solvent molecules is also increased, resulting in more frequent and energetic collisions.

Learn more about homogeneous solution at:

https://brainly.com/question/3293242

#SPJ11

Organic molecules are those that contain carbon and often hydrogen atoms bonded together, and they are the building blocks of life.

Carbon is an element that is essential to life on Earth and is the central atom in organic compounds. It can form covalent bonds with other elements such as hydrogen, oxygen, nitrogen, and sulfur.

Carbon has the unique ability to form long chains of molecules, branched structures, and rings that are essential to the structure and function of organic molecules.

Organic molecules include carbohydrates, lipids, proteins, and nucleic acids. Carbohydrates are sugars and starches that provide energy to living organisms.

Lipids are fats and oils that are important for insulation and energy storage. Proteins are complex molecules that carry out many functions in the body, such as catalyzing chemical reactions and providing structure to cells.

Nucleic acids are DNA and RNA, which carry genetic information and are essential for the synthesis of proteins.

Oxygen is another element that is essential to life on Earth. It is often found in organic molecules, especially in carbohydrates and lipids.

Oxygen is important for respiration, the process by which living organisms use energy stored in organic molecules to carry out cellular processes.

In respiration, oxygen reacts with organic molecules such as glucose to produce carbon dioxide, water, and energy in the form of ATP.

Organic molecules contain carbon and often hydrogen atoms bonded together, and they are the building blocks of life.

Carbon has the unique ability to form long chains of molecules, branched structures, and rings that are essential to the structure and function of organic molecules.

Oxygen is another element that is often found in organic molecules and is important for respiration.

to know more about organic molecules refer here:

https://brainly.com/question/10504103#

#SPJ11

The concentration of perchlorate ion in the solution that has a ph of 3.158 is 7.9 × 10−4 M.

Perchloric acid has the chemical formula HClO4. When it dissolves in water, it completely dissociates into H+ ions and ClO4- ions. The pH of a solution is defined as the negative logarithm of the hydrogen ion concentration [H+].A perchloric acid solution with a pH of 3.158 has an [H+] of 7.9 × 10−4 M, according to the following formula:

pH = −log [H+]

The concentration of the perchlorate ion [ClO4-] can be calculated using the following formula:

Kw = [H+][OH-] = 1 × 10-14 = [H+]2[H+] = 1 × 10-14[H+] = √(1 × 10-14) = 1 × 10-7M[OH-] = Kw/[H+] = (1 × 10-14) / (1 × 10-7) = 1 × 10-7M

The concentration of ClO4- is equal to the concentration of H+ because they are present in equal amounts as a result of complete dissociation of perchloric acid: [ClO4-] = [H+] = 7.9 × 10−4 M.

More on Perchloric acid: https://brainly.com/question/29089251

#SPJ11

Phenolphthalein is a commonly used indicator in acid-base titrations because it changes color at a pH around 8.2-10.0.

Phenolphthalein itself is a weak acid and has a specific equilibrium between its acidic and basic forms. When added to an acidic solution, it is predominantly in the acidic form and colorless. As the titration progresses and the solution becomes more basic, the equilibrium shifts towards the basic form which is pink.

The amount of indicator used in the titration should be kept to a minimum to avoid affecting the accuracy of the results. Using too much indicator can affect the stoichiometry of the reaction, leading to inaccurate results.

Therefore, only a small amount of phenolphthalein, typically two drops, is used to minimize its impact on the titration while still providing a clear visual indication of the endpoint.

To learn more about phenolphthalein refer to:

brainly.com/question/14804470

#SPJ4

The activation energy of the reaction, given that the rate constant has tripled when the temperature rose from 25 °C to 65 °C, is 42.6 kJ/mole.


Activation energy is the minimum energy required for a reaction to take place. It is calculated using the Arrhenius equation, which states that the rate constant, k, is proportional to the exponential of negative activation energy (Ea) divided by the gas constant (R) multiplied by the absolute temperature (T).

As the rate constant has tripled when the temperature increased, the activation energy can be calculated as Ea = -R * (1/T2 - 1/T1).

Plugging in the given temperature values of 25 °C and 65 °C and the gas constant, R, the activation energy is 42.6 kJ/mole.

To know more about rate constant click on below link:

https://brainly.com/question/14977272#

#SPJ11

Answer: Phase change from solid to gas will have a more dramatic increase in entropy.

This is because gas has the highest entropy of all phases. Gas has the highest entropy because its molecules are moving randomly, and it has the greatest amount of disorder. In addition, the transition from solid to gas involves both increasing temperature and changing the arrangement of particles from an ordered solid to a disordered gas. This results in a significant increase in entropy.

Phase transition refers to the process of changing from one phase of matter to another. When a substance changes from one phase to another, its entropy changes. Entropy refers to the degree of disorder or randomness in a system, and it is related to the number of ways that a system can be arranged. When the degree of disorder increases, the entropy also increases.

In summary, phase change from solid to gas has a more dramatic increase in entropy. This is because gas has the highest entropy of all phases, and the transition from solid to gas involves both increasing temperature and changing the arrangement of particles from an ordered solid to a disordered gas, resulting in a significant increase in entropy.



Learn more about entropy here:
https://brainly.com/question/13135498#

#SPJ11

The problem can be solved using Boyle's Law. The final pressure of the gas in the cylinder is 289.31 Pa.

Boyle's law is a gas law that describes the relationship between the pressure and volume of a gas at a constant temperature. Boyle's Law states that the pressure and volume of a gas are inversely proportional when temperature is held constant. Mathematically, it can be expressed as:

P₁V₁ = P₂V₂

where P₁ and V₁ are the initial pressure and volume, and P₂ and V₂ are the final pressure and volume.

We can plug in the given values to solve for the final pressure:

P₁ = 156 Pa

V₁ = 910 mL = 0.91 L

V₂ = 490 mL = 0.49 L

P₁V₁ = P₂V₂

156 Pa × 0.91 L = P₂ × 0.49 L

P₂ = (156 Pa × 0.91 L) / 0.49 L

P₂ = 289.31 Pa

Therefore, the final pressure is 289.31 Pa.

To find out more about Boyle's Law, visit:

https://brainly.com/question/30367067

#SPJ1

To calculate the mass of CH4N2O dissolved,

we need to follow these steps:

1. Determine the freezing point depression:
ΔTf = T(freezing point of pure X) - T(freezing point of solution) = -0.10°C - (-2.1°C) = 2°C

2. Calculate the molality (m) of the solution using the freezing point depression constant (Kf) and the freezing point depression (ΔTf):
ΔTf = Kf × m
m = ΔTf / Kf = 2°C / 2.85°C·kg/mol = 0.7018 mol/kg

3. Find the moles of CH4N2O in the solution:
moles of CH4N2O = molality × mass of solvent (in kg)
moles of CH4N2O = 0.7018 mol/kg × 0.600 kg = 0.4211 mol

4. Calculate the mass of CH4N2O using its molar mass (60.06 g/mol):
mass of CH4N2O = moles × molar mass = 0.4211 mol × 60.06 g/mol = 25.29 g

Rounded to 2 significant digits,

the mass of CH4N2O dissolved is 25 g.

To learn more about mass of CH4N 2O, visit:

https://brainly.com/question/30570470

#SPJ11

The number of moles of Helium gas that could occupy the container when the volume is increased to 500 mL is 9.05 mol.

We can use the combined gas law to solve this problem:

(P1 x V1) / (n1 x T1) = (P2 x V2) / (n2 xT2)

where;

We know that the pressure and temperature are constant, so we can simplify the equation to:

V1/n1 = V2/n2

Solving for n2, we get:

n2 = (V2n1) / V1

Plugging in the values, we get:

n2 = (500 mL * 4.00 mol) / 221 mL

n2 = 9.05 mol

Learn more about number of moles here: https://brainly.com/question/13314627

#SPJ1

the radioactive decay of c14 which is used in estimating the age of archaeological  after 2500 years, 0.0027 mol of c14 remain in the sample.

The amount of c14 remaining after 2500 years can be calculated using the first-order rate equation:

N(t) = N0 * e^(-kt)

where N0 is the initial amount of c14, N(t) is the amount remaining after time t, k is the decay constant, and e is the base of the natural logarithm. The half-life of c14 is given as 5725 years, which means that k can be calculated as:

k = ln(2)/t1/2 = ln(2)/5725

Substituting the values given in the problem, we get:

k = ln(2)/5725 = 1.21 * 10^-4 /year

Now, we can use the rate equation to find the amount of c14 remaining after 2500 years:

N(2500) = 0.0035 * e^(-1.21*10^-4 * 2500) = 0.0027 mol

For more similar questions on radioactive decay,

brainly.com/question/29107025

#SPJ11

Answer: In the movie Dark Waters, the call from the Kigers is significant because it leads to the discovery of a link between unexplained cattle deaths and pollution caused by the chemical company DuPont.

Explanation: In the movie Dark Waters, the call from the Kigers is the key moment that sets off the plot. The Kigers, who are farmers in West Virginia, call Robert Bilott, a corporate defense attorney, and ask for his help in investigating the strange deaths of their cattle. Bilott is reluctant to take on the case at first, but he eventually agrees to visit the Kigers' farm and see the situation for himself.

During his visit, Bilott discovers that the Kigers are just one of many families in the area who have experienced unexplained deaths and illnesses among their livestock, as well as health problems among their own family members. Bilott begins to suspect that the cause of these health issues is pollution from a nearby chemical plant owned by DuPont, a multinational chemical company.

Bilott takes on the case and begins a long and difficult legal battle against DuPont, uncovering evidence that the company had long known about the dangers of the chemicals it was using - specifically a substance called PFOA, which was used in the production of Teflon - but had covered up the evidence and misled regulators and the public about the risks.

In the end, the call from the Kigers is significant because it leads to the discovery of a link between unexplained cattle deaths and pollution caused by DuPont, and sets off a series of events that ultimately lead to the exposure of corporate wrongdoing and the pursuit of justice for those affected by the pollution. The Kigers' call is a catalyst for change, prompting Bilott to take action and exposing the truth about a powerful and deceitful corporation.

Hope this helps, and have a great day!

The masses of calcium chloride (CaCl2) and water used to form the mixture are 61.18 g and 134.22 g, respectively.

The mass of calcium chloride (CaCl2):
The percentage of calcium chloride (CaCl2) in the mixture is 31.5%.

Multiply the total mass of the mixture (195.4 g) by 31.5% to find the mass of calcium chloride (CaCl2) in the mixture:
Mass of calcium chloride (CaCl2) = (195.4 g) x (31.5%) = 61.18 g

The mass of water:
Subtract the mass of calcium chloride (CaCl2) from the total mass of the mixture (195.4 g) to find the mass of water in the mixture:

Mass of water = (195.4 g) - (61.18 g) = 134.22 g

Therefore, masses of calcium chloride (CaCl2) and water used to form the mixture are 61.18 g and 134.22 g, respectively.

to know more about calcium chloride refer here:

https://brainly.com/question/15296925#

#SPJ11