potassium nitrate is used for a variety of applications, including fertilizer, rocket fuel, and fireworks. how many formula units of potassium nitrate are in a 25 g sample?

The metal hydroxide that should be soluble in water among LiOH, CuOH, AgOH, Cu(OH)₂, and TlOH is LiOH.

1. LiOH: Lithium hydroxide (LiOH) is an alkali metal hydroxide, and alkali metal hydroxides are generally soluble in water. So, LiOH is soluble.

2. CuOH: Copper(I) hydroxide (CuOH) is a transition metal hydroxide, which are typically insoluble. Therefore, CuOH is not soluble.

3. AgOH: Silver hydroxide (AgOH) is also a transition metal hydroxide and is insoluble in water.

4. Cu(OH)₂: Copper(II) hydroxide (Cu(OH)₂) is another transition metal hydroxide and is insoluble in water.

5. TlOH: Thallium hydroxide (TlOH) is also a transition metal hydroxide, and like most transition metal hydroxides, it is insoluble in water.

In conclusion, among the given metal hydroxides, LiOH is soluble in water.

To know more about metal hydroxide, refer here:

https://brainly.com/question/14407261#

#SPJ11

If you conducted this coupling step under acidic conditions, you expect the reaction rate to be affected because at low pH values, the carboxylic acid is transformed into a more electrophilic species, which is easily attacked by the nucleophile, and the yield of the amide bond would be high.

In organic synthesis, coupling reactions are common, and they include the combination of a nucleophile with an electrophile to form a covalent bond. The coupling reaction between a carboxylic acid and an amine is a straightforward way to synthesize an amide in the presence of an activating agent (a molecule that can increase the electrophilicity of the carboxylic acid).

It is worth noting that there are various methods for synthesizing amides, including chemical and enzymatic methods. Coupling reactions are the most frequent chemical methods used for the synthesis of amides.

Learn more about nucleophile at:

https://brainly.com/question/6357352

#SPJ11

The pH value of the resulting solution assume the volume of the solution is not affected by this addition is 3.283.

The pH scale determines how acidic or basic water is. The range is 0 to 14, with 7 representing neutrality. Acidity is indicated by pH values below 7, whereas baseness is shown by pH values above 7. In reality, pH is a measurement of the proportion of free hydrogen and hydroxyl ions in water.

In this Question, HF is a Weak Acid and RbF is a weak Base - HNO3  is a strong acid.

HF reaction in aqueous medium

HF +  H2O  --------- H3O+  + F -  

RbF +  H2O  ----  Rb+ +  F -

pH (Original)  =  pKa  +  log ( [salt ] / [Acid] )  

We donot need to calculate pH original -which is for the original solution before adding the strong acid.

HF is a weak acid - so in a buffer solution its dissociation is negligible - so it does not affect the H+  ion concentration much.

When a 0.012 mol of HNO3  is added to the buffer solution , it dissociates in H+ and NO-3  .

H+ ions dissociated from the Acid react with F -  and produce HF . As a result the acid concentration will increase to the extent of 0.012 mol  and the salt concentration reduces by the same extent - 0.012 mol.

So the formula for New pH changes to

pH (New)  =  pKa  +  log ( [salt ] - 0.012 mol / [Acid] + 0.012 mol)

Here , 0.012 mol are added to 281 mL solution,

Concentration of HNO3,  M = number of moles / Vol in litres  

                                            =  0.012 mol / 281 mL

                                            =  0.012 mol / 281  / 1000

                                           = [0.012 mol x 1000]  / 281 L  =  0.043 M

As pKa = -log(Ka)  ,  

Given  [salt ] =  0.480 M ,  [Acid] =  0.318 M

                   = - log(Ka) +  log [ (0.480 M - 0.043 M) / (0.318 M + 0.043 M) ]

                        =  - log (6.31 x 10-4 )   +  log ( 0.437 / 0.361)

      pH (New)    =  3.20 + 0.083  = 3.283.

Learn more about pH value:

https://brainly.com/question/10603602

#SPJ4

Complete question:

A biochemist wanted to adjust the pH of 281 mL of a buffer solution composed of 0.318 M HF and 0.480 M RbF (K, = 6.31e - 04) by adding 0.012 moles of HNO3. Determine the pH of the resulting solution: pH number (rtol=0.02, atol=1e-08)

The compounds containing anions from the most basic to least basic are:1) B (Strongest base)2) C3) A (Weakest base)The order of basicity of anionic compounds can be determined using the periodic table. The correct answer is B>C>A.

Anions are larger than their corresponding atoms due to the addition of one or more electrons. As a result, anions have lower effective nuclear charges and therefore are more basic than their parent atoms. The larger the anion, the more basic it is. The order of basicity of anionic compounds is as follows:

B > C > A

Where, B is the most basic anionic compound, C is the second most basic anionic compound, A is the least basic anionic compound

Therefore, the order of the anionic compounds from the most basic to least basic is B > C > A. To order the anionic compounds from the most basic to least basic, follow these steps: Identify the anions present in each compound., Determine the conjugate acid of each anion, Compare the strength of the conjugate acids, Order the anionic compounds based on the strength of their conjugate acids (the weaker the conjugate acid, the stronger the base).

To know more about anions, refer here:

https://brainly.com/question/30581995#

#SPJ11

The statement "it is fine to enter an area where there is a chemical spill as long as you are very careful" is False. because A chemical spill refers to the uncontrolled release of one or more hazardous substances.

A chemical spill refers to the uncontrolled release of one or more hazardous substances, which can include liquids, gases, or solids, which might pose a significant threat to the environment and human health. The person responsible for a chemical spill is responsible for managing, containing, and cleaning up the hazardous material to prevent environmental or public health damage.

Following a chemical spill, there is a protocol to be followed to guarantee that no harmful substances have been released into the environment that may cause harm to the public. The presence of toxic chemicals in a confined area poses a significant threat to human health, making it hazardous to enter that location. Even if the spill is small, entering an area where a chemical spill has occurred is hazardous. The contamination may disperse through the air, and you may inhale it or the substance may adhere to your clothing and skin, putting you at risk. You should not go near a chemical spill if you are not wearing appropriate protective gear. This is because it is not advisable to enter an area where there is a chemical spill.

For more such questions on chemical spill , Visit:

https://brainly.com/question/30256645

#SPJ11

The original volume of the container is 5.40 L.

The given final volume of a container when heated is 15.5 L. The container expands when heated from 159 K to 456 K.  

The formula used to solve this problem is:

V1 = (V2 × T1) / T2

V1 is the original volume of the container

V2 is the final volume of the container

T1 is the final temperature of the container

T2 is the initial temperature of the container

Let's substitute the given values in the above formula:

V1 = (15.5 × 159) / 456V1 = 5.40 L

Therefore, the original volume of the container is 5.40 L.

To know more about original volume click here:

https://brainly.com/question/12014506

#SPJ11

After three half-lives, the concentration of the reactant will be 1/8 of its initial concentration. This means that the remaining concentration of the reactant after three half-lives will be 8 m.

A second order reaction is one that has a rate proportional to the product of the concentration of two reactants or the square of the concentration of one reactant. In this case, the rate of the reaction is given by the equation:

r = k[A]²

The half-life of a reaction is the amount of time it takes for the concentration of the reactant to decrease by half. The half-life of a second-order reaction is given by the equation:

t½ = 1 / (k[A]₀)

Where k is the rate constant, [A]₀ is the initial concentration of the reactant, and t½ is the half-life of the reaction. After one half-life, the concentration of the reactant will be [A] = [A]₀ / 2

After two half-lives, the concentration of the reactant will be [A] = [A]₀ / 4

After three half-lives, the concentration of the reactant will be [A] = [A]₀ / 8

Given that the initial concentration of the reactant is 64 M, the concentration of the reactant after three half-lives is:

[A] = [A]₀ / 8[A] = 64 / 8[A] = 8 M

Therefore, the concentration of the reactant that is left after three half-lives is 8 M.

For more such questions on half-life , Visit:

https://brainly.com/question/23191712

#SPJ11

The density of heavy water at 20°C is 1.107 g/mL.  


At 20°C, the density of normal water is 0.9982 g/ml.

The density of heavy water, which is composed of two atoms of deuterium instead of hydrogen, we must consider the difference in size between hydrogen and deuterium atoms.

Although the atomic masses of hydrogen and deuterium are slightly different, the difference in size is more significant, with deuterium atoms being about twice the size of hydrogen atoms.

Thus, when deuterium atoms are part of the water, the overall density of the water is greater.

This can be quantified using the following equation:

Density (heavy water) = [2*mass of hydrogen + mass of deuterium] / [2*volume of hydrogen + volume of deuterium]

The density of heavy water at 20°C is 1.107 g/ml, which is about 11% higher than that of normal water.

This increase in density is due to the larger size of deuterium atoms when compared to hydrogen atoms.

In conclusion, the density of heavy water at 20°C can be calculated by accounting for the difference in size between hydrogen and deuterium atoms.

This yields a value of 1.107 g/ml, which is 11% higher than that of normal water.

to know more about density refer here:

https://brainly.com/question/29775886#

#SPJ11

The temperature should be raised by 28.15°C to run 100 times faster than it does at room temperature with the catalyst.

To determine the temperature increase needed to make the catalyzed reaction run 100 times faster, we can use the Arrhenius equation:

[tex]k_{2}[/tex]/[tex]k_{1}[/tex] = e^(-Ea/R * (1/[tex]T_{2}[/tex] - 1/[tex]T_{1}[/tex])

Where [tex]k_{1}[/tex] and [tex]k_{2}[/tex] are the rate constants at temperatures [tex]T_{1}[/tex] and [tex]T_{2}[/tex], Ea is the activation energy (98.4 kJ mol-1), and R is the gas constant (8.314 J [tex]K^{-1}[/tex] [tex]mol^{-1}[/tex]).

Since we want the reaction to be 100 times faster, k2/k1 = 100. Now we can rearrange the equation and solve for [tex]T_{2}[/tex]:

1/[tex]T_{2}[/tex] - 1/[tex]T_{1}[/tex] = -R * ln(100)/Ea

Assuming room temperature ([tex]T_{1}[/tex]) is 298 K (25°C), we can plug in the values:

1/[tex]T_{2}[/tex] - 1/298 = -8.314 * ln(100)/98,400

1/[tex]T_{2}[/tex] = 1/298 + (8.314 * ln(100)/98,400)

[tex]T_{2}[/tex] = 1 / (1/298 + (8.314 * ln(100)/98,400))

Now, calculate the value of [tex]T_{2}[/tex]:

[tex]T_{2}[/tex] ≈ 326.3 K

To convert [tex]T_{2}[/tex] to °C, subtract 273.15:

[tex]T_{2}[/tex] = 326.3 - 273.15 ≈ 53.15°C

Therefore, you would need to raise the temperature by approximately 28.15°C (53.15 - 25) to make the catalyzed reaction run 100 times faster.

To know more about Arrhenius Equation:

https://brainly.com/question/16994409

#SPJ11

Answer: 100cm3 of gas at 27°c exert a pressure of 750mmHg. Calculate its pressure if it's volume is increased to 250cm3 at 127°c? In Chemistry

Explanation:

The equilibrium equation for the dissolution of potassium chloride (KCl) in water can be represented as:

KCl(s) ⇌ K+(aq) + Cl-(aq)

What is Equilibrium?

In chemistry, equilibrium refers to the state of a chemical reaction where the concentrations of reactants and products no longer change with time. At this stage, the forward and reverse reactions occur at the same rate, resulting in no net change in the concentrations of reactants and products. It is denoted by a double arrow (⇌) between the reactants and products in a chemical equation. The equilibrium point is reached when the rate of the forward reaction equals the rate of the reverse reaction. The equilibrium constant, Keq, is a quantitative measure of the equilibrium concentration of reactants and products.

In this equation, KCl is the solid salt, and the arrow indicates the reversible reaction between the solid and its constituent ions in the aqueous solution. The dissociation of KCl in water results in the formation of potassium ions (K+) and chloride ions (Cl-) in the solution. When the rate of the forward reaction is equal to the rate of the reverse reaction, the solution is said to be in a state of dynamic equilibrium. In a saturated solution of KCl, the concentration of the dissolved ions is at its maximum value at equilibrium, and the undissolved solid salt is in equilibrium with its dissolved ions.

Learn more about  Equilibrium from given link

https://brainly.com/question/517289

#SPJ1

The element with an atomic number of 11 that gets its symbol from the Latin word "natrium" is Sodium. Its symbol is "Na".

The symbol for sodium is Na, which is derived from the Latin word natrium. Sodium is a soft, silvery-white, highly reactive metal that is a member of the alkali metal group. It is an important element for many biological processes and is commonly found in salt (sodium chloride).

The other elements listed in the question are chlorine, iron, and nitrogen. Chlorine has an atomic number of 17, iron has an atomic number of 26, and nitrogen has an atomic number of 7. None of these elements gets their symbol from the Latin word natrium.

For more question on atomic number click on

https://brainly.com/question/11353462

#SPJ11

Probable question would be

with an atomic number of 11, which of these elements gets its symbol from the latin word natrium?

Sodium

Chlorine

Iron

Nitrogen

The partial pressure of Ar is 0.219 * 1,380 mmHg = 301 mmHg.

The partial pressure of a gas in a mixture is equal to the mole fraction of that gas times the total pressure of the mixture.

The mole fraction of Ar in this mixture is 1.50/6.81 = 0.219. Thus, the partial pressure of Ar is 0.219 * 1,380 mmHg = 301 mmHg.

The ideal gas law states that the pressure of a gas is directly proportional to its number of moles and inversely proportional to its volume.

This law is expressed in the equation PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

In a mixture of gases, each gas behaves independently according to the ideal gas law. Thus, the total pressure of the mixture is the sum of the partial pressures of each gas.

The partial pressure of a gas is equal to its mole fraction times the total pressure. The mole fraction of a gas is the number of moles of that gas divided by the total number of moles of all gases in the mixture.

In the example provided, the total pressure of the mixture is 1,380 mmHg, the number of moles of CO2 is 1.27, the number of moles of CO is 3.04, and the number of moles of Ar is 1.50.

The total number of moles of all gases in the mixture is 1.27 + 3.04 + 1.50 = 6.81. The mole fraction of Ar is 1.50/6.81 = 0.219. Thus, the partial pressure of Ar is 0.219 * 1,380 mmHg = 301 mmHg.

To  know more about partial pressure refer here:

https://brainly.com/question/13199169#

#SPJ11

The compound that has a boiling point closest to that of Argon is HF. This is because HF has the strongest intermolecular forces (hydrogen bonding) among the given compounds.

The boiling point of a compound depends on the strength of the intermolecular forces that exist between the molecules. The stronger the intermolecular forces, the higher the boiling point.

The weaker the intermolecular forces, the lower the boiling point. The boiling point of Argon is -186°C. Out of the given compounds, the boiling point of HF is the closest to the boiling point of Argon.

The boiling point of HF is -83.8°C. This is because HF has hydrogen bonding which is the strongest intermolecular force among the given compounds. The other compounds such as Cl2, F2, HCl, and NaF, have weaker intermolecular forces than HF. Therefore, they have a lower boiling point than HF.

Learn more about HF here:

https://brainly.com/question/14581360#


#SPJ11

Answer : The molar mass of magnesium is 24.305 g/mol

To calculate the mass of magnesium that participated in the chemical reaction, you need to know the number of moles of magnesium and the molar mass of magnesium. The molar mass of magnesium is 24.305 g/mol. Multiply the number of moles of magnesium by the molar mass of magnesium to calculate the mass of magnesium that participated in the chemical reaction.  

For example, if you were given that the number of moles of magnesium is 0.25 moles, then you can calculate the mass of magnesium by multiplying 0.25 moles by 24.305 g/mol. This gives a result of 6.076 g of magnesium that participated in the chemical reaction.

To sum up, calculating the mass of magnesium that participated in the chemical reaction requires knowing the number of moles of magnesium and the molar mass of magnesium. The molar mass of magnesium is 24.305 g/mol, and you can calculate the mass of magnesium that participated in the chemical reaction by multiplying the number of moles of magnesium by the molar mass of magnesium.

Know more about magnesium here:

https://brainly.com/question/1533548

#SPJ11

Answer:

The oxidation of an aldehyde can be achieved using a variety of oxidizing agents, including potassium permanganate (KMnO4), chromium trioxide (CrO3), and silver oxide (Ag2O). The specific oxidizing agent used will depend on the conditions and desired yield.

For example, if we want to prepare acetic acid, we can oxidize ethanol (an alcohol) using a strong oxidizing agent like potassium permanganate. Alternatively, we can oxidize acetaldehyde (an aldehyde) using a milder oxidizing agent like silver oxide.

Therefore, any aldehyde can be used to prepare a carboxylic acid by oxidation, but the specific oxidizing agent and reaction conditions may vary depending on the aldehyde and desired yield.

The aldehyde that is need for the preparation of the acid is CH3(CH2)8CH(Cl)CHO

It is not possible to directly prepare an acid from an aldehyde as an aldehyde is already an oxidized form of a primary alcohol, which can be further oxidized to form a carboxylic acid.

Aldehydes can be oxidized to carboxylic acids using strong oxidizing agents such as potassium permanganate (KMnO4) or chromic acid (H2CrO4). The reaction conditions need to be carefully controlled to avoid over-oxidation of the aldehyde to carbon dioxide.

Learn more about aldehyde:https://brainly.com/question/30665943

#SPJ1

One way that the layers of the atmosphere help to maintain life on Earth is by absorbing and scattering harmful solar radiation, such as ultraviolet (UV) radiation.

The ozone layer, which is located in the stratosphere layer of the atmosphere, absorbs most of the Sun's harmful UV radiation, preventing it from reaching the Earth's surface where it can cause DNA damage and skin cancer. Additionally, the atmosphere helps regulate the Earth's temperature by trapping heat from the Sun through the greenhouse effect, which is essential for maintaining a stable and habitable climate. The atmosphere also contains oxygen, which is necessary for the survival of many living organisms.

To know more about scattering click here:

brainly.com/question/3292565

#SPJ4

The empirical formula of the given compound can be determined as follows the CHOS or C3H4O3.

According to the given data, the compound citric acid contains 37.51% C, 4.20% H, and 58.29% O by mass. So, let's assume that we have 100 g of citric acid, and then, we can find the masses of each element present in it: Mass of carbon = 37.51 gMass of hydrogen = 4.20 g. Mass of oxygen = 58.29 g.

Next, we need to convert the masses into the number of moles using the molar masses of the elements. The molar mass of carbon = 12.01 g/mol, Number of moles of carbon = 37.51 g / 12.01 g/mol = 3.124 molMolar mass of hydrogen = 1.01 g/molNumber of moles of hydrogen = 4.20 g / 1.01 g/mol = 4.158 molMolar mass of oxygen = 16.00 g/molNumber of moles of oxygen = 58.29 g / 16.00 g/mol = 3.643 follow, we need to find the simplest whole-number ratio of these moles by dividing them by the smallest number of moles, which is 3.124 mol: Carbon = 3.124 mol / 3.124 mol = 1Hydrogen = 4.158 mol / 3.124 mol = 1.33 ≈ 1Oxygen = 3.643 mol / 3.124 mol = 1.17 ≈ 1So, the empirical formula of citric acid is CHOS or C3H4O3.

Read more about carbon:

https://brainly.com/question/19083306

#SPJ11

Answer: The important gas that we inhale when we breathe is oxygen (O2).

It is necessary for the process of respiration. Respiration is a vital process that takes place in all living cells, including human cells. In this process, glucose (sugar) and oxygen are converted into energy (ATP), carbon dioxide (CO2), and water (H2O).

During the process of inhalation, the air enters the body through the mouth and nose. Afterward, it moves down the trachea and then into the lungs. Once inside the lungs, oxygen molecules pass through the thin walls of the capillaries and into the bloodstream, where it is transported to the rest of the body. Oxygen is essential for the proper functioning of the body.

It is used by the cells to produce energy, which is used to power various biological processes. Without oxygen, our cells would not be able to function, and we would die.

Learn more about oxygen here:

https://brainly.com/question/13905823#


#SPJ11

Answer: Hydrogen chloride is a diatomic molecule, consisting of a hydrogen atom H and a chlorine atom Cl connected by a polar covalent bond.

Answer: There are 8 anions and 6 cations in the unit cell.

There are 8 anions and 6 cations in the unit cell. The unit cell consists of a cube, with an anion, 'a', at each corner, an anion in the center, and a cation, 'x', at the center of each face.

The cube is made up of 8 cubes, each of which is made up of one anion at each corner, and one cation at the center. Therefore, there are 8 anions in the unit cell, one at each corner. In addition, there is an anion in the center of the unit cell.

The 6 cations are located in the center of each of the faces of the cube. The cations are located in the middle of each face and therefore, there are 6 cations in the unit cell.

In total, there are 8 anions and 6 cations in the unit cell.

Learn more anions and cations here:

https://brainly.com/question/20781422#

#SPJ11

True, a saturated hydrocarbon has the maximum amount of hydrogens attached to the carbon skeleton.

Hydrocarbons are organic molecules that are made up of only carbon and hydrogen atoms. They may be composed of chains of various lengths, rings of various sizes, or a combination of both. The simplest hydrocarbons, such as methane (CH4), ethane (C2H6), and propane (C3H8), are gaseous at room temperature, whereas larger hydrocarbons are liquids, such as hexane (C6H14), or solids, such as hexadecane (C16H34).

Unsaturated hydrocarbons have carbon-carbon double or triple bonds in their structures, indicating that they are not completely saturated with hydrogen atoms. These hydrocarbons are commonly referred to as alkenes or alkynes, respectively. Alkenes have one double bond, whereas alkynes have one triple bond.

Read more about hydrocarbon :

https://brainly.com/question/22047391

#SPJ11

Answer: Benzene has a boiling point of 80oC, toluene has a boiling point of 110 oC, and xylene has a boiling point of 130 oC. The GC of a mixture of these three compounds should show retention times as benzene, toluene, xylene.

The GC of a mixture of these three compounds should show retention times as. The correct answer is Option C; benzene, toluene, xylene. The boiling points of the components indicate that they have different volatility.

Therefore, the order of volatility follows the order in which they have been mentioned in the question;

benzene < toluene < xylene

This means that as the boiling point increases, the retention time of each compound in the column also increases. Since the order of volatility is benzene < toluene < xylene, the retention times of the compounds will be as follows; benzene will have the least retention time, followed by toluene and then xylene, with the largest retention time.

Therefore, the GC of a mixture of these three compounds should show retention times as benzene, toluene, and xylene.

Learn more about retention here:

https://brainly.com/question/29709076#



#SPJ11

520.67 liters of HCl gas are required to make concentrated hydrochloric acid (11.6 mol/L) at 25°C and 1 atm pressure. while assuming ideal behavior.

To make concentrated hydrochloric acid (11.6 mol/L) at 25°C and 1 atm pressure, the volume of HCl gas needed is 520.67 L.

Assuming ideal behavior,

Molarity (M) = number of moles of solute/volume of solution in liters (L)

Given:

Molarity (M) = 11.6 mol/L

Volume of solution (V) = ?

Temperature (T) = 25°C

Pressure (P) = 1 atm

We can use the ideal gas law to find the volume of HCl gas required to make 1 L of concentrated HCl. Then, we can use this value to find the volume of HCl gas required to make a certain volume of concentrated HCl. The ideal gas law is given as:

PV = nRT

where: P is pressure, V is volume of the gas, n is the number of moles of gas, R is the gas constant, T is the temperature. We can rearrange the ideal gas law to solve for volume:

V = nRT/PAt

standard temperature and pressure (STP), 1 mole of an ideal gas occupies 22.4 L.

Therefore, the number of moles of HCl gas required to make 1 L of concentrated HCl is given as:

11.6 mol/L × 1 L = 11.6 moles

We can substitute these values into the ideal gas law equation and solve for the volume of HCl gas required to make 1 L of concentrated HCl:

V = nRT/PV = (11.6 mol) × (0.08206 L·atm/K·mol) × (298 K)/(1 atm)V

= 260.51 L

However, we are interested in finding the volume of HCl gas required to make a certain volume of concentrated HCl. We can use the following conversion factor to find the volume of HCl gas required:

1 L concentrated HCl = 260.51 L HCl gas

We can use dimensional analysis to solve for the volume of HCl gas required to make 1 L of concentrated HCl:

11.6 mol/L × 1 L concentrated HCl × (260.51 L HCl gas/1 L concentrated HCl) = 3020.37 L HCl gas

However, this calculation gives the volume of HCl gas required to make 1 L of concentrated HCl.

We are interested in finding the volume of HCl gas required to make a certain amount of concentrated HCl.

We can use the following formula to solve for the volume of HCl gas required to make a certain amount of concentrated HCl:

V2 = V1 × (M1/M2)

where:V1 is the volume of concentrated HCl needed

M1 is the molarity of concentrated HCl

M2 is the molarity of the HCl gas

V2 is the volume of HCl gas needed

We can substitute the given values into the formula and solve for

V2:V2 = (1 L) × (11.6 mol/L)/(0.08206 L·atm/K·mol × 298 K)V2

= 520.67 L

Therefore, 520.67 liters of HCl gas are required to make concentrated hydrochloric acid (11.6 mol/L) at 25°C and 1 atm pressure.

For more such questions on ideal behavior , Visit:

https://brainly.com/question/28302575

#SPJ11

The volume of NaOH solution used in the titration is 22.50 mL or 0.0225 L. The molarity of the NaOH solution is 0.210 mol/L.

To determine the molarity of the NaOH solution, we can use the balanced chemical equation for the reaction between NaOH and KHP:

NaOH + KHP → NaKP + H2O

From the equation, we can see that one mole of NaOH reacts with one mole of KHP. Therefore, the number of moles of NaOH used in the titration can be calculated by:

moles NaOH = molarity of NaOH solution × volume of NaOH solution used (in liters)

The volume of NaOH solution used in the titration is 22.50 mL or 0.0225 L.

To calculate the molarity of the NaOH solution, we need to determine the number of moles of NaOH used in the titration. From the balanced equation, we can see that one mole of KHP reacts with one mole of NaOH. The mass of KHP used in the titration is 0.969 g, which corresponds to the number of moles of KHP used:

moles KHP = mass of KHP / molar mass of KHP

= 0.969 g / 204.22 g/mol

= 0.004738 mol

Since the stoichiometry of the reaction is 1:1, the number of moles of NaOH used in the titration is also 0.004738 mol. Substituting these values into the above equation, we get:

0.004738 mol = molarity of NaOH solution × 0.0225 L

Solving for the molarity of the NaOH solution, we get:

molarity of NaOH solution = 0.004738 mol / 0.0225 L

= 0.210 mol/L

To learn more about molarity

https://brainly.com/question/8732513

#SPJ4

There is 73 3/4 liters of milk left in the vessel.

John drank 14 1/4 liters of milk and Joe drank 12 1/2 liters of milk. This means that a total of 26 3/4 liters of milk was consumed from the vessel. 112 1/2 liters of milk was the total amount of milk in the vessel, so if we subtract the 26 3/4 liters that was consumed from the vessel, we can calculate the remaining amount of milk left in the vessel.

Calculate the total amount of milk that was consumed.

John drank 14 1/4 liters of milk and Joe drank 12 1/2 liters of milk. This means that a total of 26 3/4 liters of milk was consumed from the vessel.

Calculate the amount of milk left in the vessel.

The total amount of milk in the vessel was 112 1/2 liters. If we subtract the 26 3/4 liters that was consumed from the vessel, we can calculate the remaining amount of milk left in the vessel: 112 1/2 liters - 26 3/4 liters = 73 3/4 liters.

In this problem, we needed to calculate the amount of milk left in the vessel after two people drank from it. We did this by first calculating the total amount of milk that was consumed (John drank 14 1/4 liters of milk and Joe drank 12 1/2 liters of milk). Then, we calculated the remaining amount of milk left in the vessel by subtracting the amount of milk consumed from the total amount of milk in the vessel (112 1/2 liters - 26 3/4 liters = 73 3/4 liters).

To know more about diluted milk  click on below link :

https://brainly.com/question/30203634#

#SPJ11

The solubility of KHT (solid) in pure water compared with the solubility of KHT (solid) in a 0.1 M KCl solution is predicted to be higher in the 0.1 M KCl solution. This is because the KCl solution has a higher ionic strength, increasing the solubility of ionic compounds like KHT.

Let's understand this in detail:

What is solubility?

Solubility is defined as the ability of a substance to dissolve in a particular solvent under certain conditions. It measures the maximum amount of solute that can be dissolved in a given amount of solvent at a particular temperature, pressure, and other conditions.

Solubility of KHT in pure water:

KHT (Potassium hydrogen tartrate) is a weak acid salt that has low solubility in pure water. The solubility of KHT in pure water is affected by various factors such as temperature, pH, and pressure. The solubility of KHT in pure water is around 4.4 g/L at room temperature.

Solubility of KHT in 0.1 M KCl solution: The solubility of KHT in a 0.1 M KCl solution is predicted to be higher than in pure water. KCl is an ionic salt dissociating in water to produce K+ and Cl- ions. The presence of KCl increases the ionic strength of the solution. This ionic strength improves the solubility of other ionic compounds, such as KHT. KHT has a higher solubility in a 0.1 M KCl solution than in pure water due to this reason.

#SPJ11

Learn more about solubility: Explain how you would find the solubility of a solute https://brainly.com/question/23946616

by use identical respirometers. An intermediary in this process is pyruvate.

Pyruvate is a crucial intermediary in several metabolic processes, including gluconeogenesis, fermentation, cellular respiration, fatty acid production, etc. Pyruvate is created near the conclusion of the glycolysis process. Through Kreb's cycle, pyruvate gives energy to living cells.

Pyruvate is a crucial intermediate that can be employed in a number of anabolic and catabolic pathways, including as oxidative metabolism, glucose re-synthesis (gluconeogenesis), cholesterol synthesis (de novo lipogenesis), and maintenance of the tricarboxylic acid (TCA) cycle flow.

To know more about respirometers visit:-

https://brainly.com/question/15609292

#SPJ1

Answer: The pH of the solution is 9.22.

Explanation:

The given solution is a mixture of 200 mL of 0.20 M NaH2PO4 and 200 mL of 0.60 M Na2HPO4. NaH2PO4 is a weak acid and Na2HPO4 is a weak base. When they are mixed, they undergo a buffer solution.

The Henderson-Hasselbalch equation for a buffer is:

pH = pKa + log ([A-]/[HA])

Where,

pKa = -log Ka (dissociation constant of the acid)

[HA] = concentration of the acid (NaH2PO4)

[A-] = concentration of the conjugate base (HPO42-)

The pKa value for NaH2PO4 is 7.21 (at 25°C). The concentrations of the acid and the conjugate base can be calculated as follows:

For NaH2PO4:

moles of NaH2PO4 = 0.20 M x 0.2 L = 0.04 mol

concentration of NaH2PO4 = 0.04 mol / 0.4 L = 0.10 M

For Na2HPO4:

moles of Na2HPO4 = 0.60 M x 0.2 L = 0.12 mol

concentration of Na2HPO4 = 0.12 mol / 0.4 L = 0.30 M

Using the Henderson-Hasselbalch equation and substituting the values:

pH = 7.21 + log ([HPO42-]/[H2PO4-])

pH = 7.21 + log (0.30/0.10)

pH = 9.22

Therefore, the pH of the solution is 9.22.

The nature of the bond indicated in the diagram above would be the nonpolar covalent bond. That is option A.

A Nonpolar Covalent bond is defined as the type of chemical bond that is formed when electrons are shared equally between two atoms.

While polar covalent bond is defined as the type of chemical bond that is formed when electrons are shared unequally between two atoms.

For example, molecular oxygen (O2) is nonpolar because the electrons will be equally distributed between the two oxygen atoms.

Therefore the type of bond that is indicated in the diagram above is a nonpolar covalent bond.

Learn more about covalent bond here:

https://brainly.com/question/29630777

#SPJ1