Question Help Find the probability of z occurring in the indicated region of the standard normal distribution. Click here to view page 1 of the standard normal table. Click here to view page 2 of the standard normal table. A Z 0 1.44 P(0

The slope of the line given above which passes through points (-2, -1) and (0, -2) is calculated as: m = -1/2.

To find the slope of the line given above, apply the slope formula, then use the coordinates of any two points on the line to calculate the slope.

Slope of a line (m) = change in y / change in x = y2 - y1 / x2 - x1

We have:

(-2, -1) = (x1, y1)

(0, -2) = (x2, y2)

Plug in the values:

Slope (m) = (-2 -(-1)) / (0 - (-2))

m = -1 / 2

Slope of the line (m) = -1/2

Learn more about the slope of a line on:

https://brainly.com/question/29044610

#SPJ1

To set up the payoff matrix for the variation of the Heads or Tails game, we need to create a 2x2 matrix with the possible outcomes and their corresponding point values.

The payoff matrix will look like this:

          Friend
            H   T
         ---------
You  H  |  -5  5
         ---------
    T  |   3  -3

In this matrix, the rows represent your choices (Head or Tail), and the columns represent your friend's choices (Head or Tail). The numbers in the matrix indicate the points you receive for each combination of choices. A positive number means you gain points, while a negative number means your friend gains points.

For example, if both you and your friend call "heads" (H), your friend wins 5 points, so the value in the corresponding cell is -5. If you call "heads" (H) and your friend calls "tails" (T), you win 5 points, so the value in the corresponding cell is 5. If you call "tails" (T) and your friend calls "heads" (H), you win 3 points, so the value in the corresponding cell is 3. Finally, if both you and your friend call "tails" (T), your friend wins 3 points, so the value in the corresponding cell is -3.

Payoff Matrixhttps://brainly.com/question/31519832

#SPJ11

The proportion of shoppers who can identify the highly advertised trademark is significantly higher than 40% at the 0.01 level of significance.

Let's break it down step-by-step using the provided information:

1. Hypotheses: - Null hypothesis (H0): p = 0.40 (40% of all shoppers can identify the trademark) - Alternative hypothesis (Ha): p > 0.40 (more than 40% of all shoppers can identify the trademark)

2. Level of significance: - α = 0.01

3. Sample information: - n (sample size) = 18 - x (number of successful identifications) = 13 - p-hat (sample proportion) = x / n = 13 / 18 = 0.7222 4. Test statistic

calculation: - We'll use a one-sample z-test for proportions. - z = (p-hat - p) / sqrt((p * (1 - p)) / n) - z = (0.7222 - 0.40) / sqrt((0.40 * (1 - 0.40)) / 18) - z ≈ 2.88 5. Decision: - Since α = 0.01, we'll compare our test statistic to the critical value from the z-table, which is 2.33 for a one-tailed test. - Our test statistic, z ≈ 2.88, is greater than the critical value of 2.33.

Conclusion: Since our test statistic is greater than the critical value at the 0.01 level of significance, we have enough evidence to reject the null hypothesis (H0). This means that there is sufficient evidence to support the claim that more than 40% of all shoppers can identify a highly advertised trademark.

Learn more about critical value,

https://brainly.com/question/28159026

#SPJ11

Answer:

The answer is 37

Step-by-step explanation:

he started with 10 parts. He took one of those 10 so he was left with 9 on the table , then he cut the one into 10 so 10+9= 19. He did the same 2 more times , it means that he took one of the 19 , so 18 on the table and he cut the one into 10 ,therefore, 28. Then he did it one last time , he took one of the 28 so 27 on the table , he cut the one and then finally 27+10= 37 pieces.

Its hard to explain but I think you'll get the idea.

The area of the shaded region will be 8 square unit as per the given figure.

The rectangle has dimensions 2 x 4, so its area is:

Area of rectangle = length x width = 2 x 4 = 8 square units

The triangle has dimensions 4 x 8, so its area is:

Area of triangle = (1/2) x base x height = (1/2) x 4 x 8 = 16 square units

To find the area of the shaded region, we need to subtract the area of the triangle from the area of the rectangle.

Area of shaded region = Area of the triangle - Area of rectangle

Area of shaded region = 16-8

Area of shaded region = 8

The area of the shaded region will be 8 square units.

Learn more about Area here:

https://brainly.com/question/27683633

#SPJ1

Complete question:

a) Using the Law of Cosines for this triangle, we can write the equation:
d² = (36)² + (3s)² - 2(36)(3s)cos(60°)

b) The second ship must travel at approximately 4.24 miles per hour to be 42 miles apart from the first ship at noon.

(a) To write an equation that relates the speed s and the distance d between the two ships at noon using the Law of Cosines, we first need to determine the distance each ship has traveled by noon. Since they leave at 9 a.m. and we're interested in the distance at noon, they travel for 3 hours.

Ship 1:
Speed: 12 miles per hour
Distance traveled: 12 miles/hour * 3 hours = 36 miles

Ship 2:
Speed: s miles per hour
Distance traveled: s miles/hour * 3 hours = 3s miles

Now, we can form a triangle where Ship 1 travels 36 miles, Ship 2 travels 3s miles, and the distance between them (d) is the third side. The angle between Ship 1 and Ship 2 is 180° - (53° + 67°) = 60°.

Using the Law of Cosines for this triangle, we can write the equation:
d² = (36)² + (3s)² - 2(36)(3s)cos(60°)

(b) To find the speed s that the second ship must travel so that the ships are 42 miles apart at noon, we can plug d = 42 into our equation from part (a) and solve for s.

42² = (36)² + (3s)² - 2(36)(3s)cos(60°)

Solving for s, we get:
s ≈ 4.24 miles per hour (rounded to two decimal places)

So, the second ship must travel at approximately 4.24 miles per hour to be 42 miles apart from the first ship at noon.

Learn more about "speed": https://brainly.com/question/13943409

#SPJ11

The sample space for rolling a fair six-sided die is {1, 2, 3, 4, 5, 6}.

option C.

A sample space describes the possible outcome of an event.

The sample space for rolling a fair six-sided die consists of the six possible outcomes and we can list them as follows;

S = {1, 2, 3, 4, 5, 6}

Each outcome represents the number that appears on the top face of the die after it is rolled. So this sample space contains all the likely outcome each time we roll the die.

Learn more about sample space here: https://brainly.com/question/27325845

#SPJ1

The statement "The sampling distribution of a sample statistic calculated from a sample of n measurements is the probability distribution of the statistic" is true.

The sampling distribution of a sample statistic is indeed the probability distribution of that statistic when calculated from a sample of n measurements.

This concept is important in understanding the variability of sample statistics and making inferences about the population.

Therefore, the statement "The sampling distribution of a sample statistic calculated from a sample of n measurements is the probability distribution of the statistic" is true.

Learn more about "sampling": https://brainly.com/question/24466382

#SPJ11

Area measures the size of a closed curve in square units. It is the degree of the measure of a two-dimensional region enclosed \by a closed bend. It is solved in square units.

The equation for the areas of diverse plane figures are:

Therefore, for composite figures, which are made up of two or more basic figures, the zone can be found by including the ranges of the person figures. Some of the time, it may be essential to subtract ranges that are numbered twice.

Learn more about Area of plane figures from

https://brainly.com/question/4895332

#SPJ1

We can estimate that each square formed by dividing the rectangle has a side length of approximately 5.57 units.

Let's denote the width of the rectangle as x. Then, according to the problem, the length of the rectangle is twice the width, so its length is 2x. The area of the rectangle is given as 62 square units, so we can write:

Area of rectangle = length x width

62 = 2x * x

62 = 2x^2

Solving for x, we get:

x^2 = 31

x ≈ 5.57

Therefore, the width of the rectangle is approximately 5.57 units, and its length is approximately 2 * 5.57 = 11.14 units.

Now, we are asked to estimate the side length of each square that can be formed by dividing the rectangle into two equal parts. Since the area of each square is half of the area of the rectangle, we can write:

Area of each square = (1/2) × (length × width)

Area of each square = (1/2) × (2x × x)

Area of each square = x^2

Substituting the value of x from above, we get:

Area of each square ≈ 31

The side length of each square ≈ √31 ≈ 5.57

To learn more about rectangle

https://brainly.com/question/28993977

#SPJ4

The answer to Converting 15 degrees Celsius using the formula for converting Celsius temperature into Fahrenheit temperature is 59 degrees Fahrenheit.

To convert 15 degrees Celsius (C) into Fahrenheit (F) using the formula F = 9/5 C + 32, follow these steps:

1. Substitute the given Celsius temperature (15 degrees) into the formula: F = 9/5 * 15 + 32
2. Multiply 9/5 by 15: (9/5) * 15 = 27
3. Add 32 to the result from step 2: 27 + 32 = 59

So, 15 degrees Celsius is equal to 59 degrees Fahrenheit.

Learn more about  Fahrenheit (F)  temperature: https://brainly.com/question/25677592

#SPJ11

Answer:

To find the slope of the tangent line to the path of the particle at the point where t = 2, we first need to find the values of x(2) and y(2), as well as their derivatives x'(2) and y'(2).

Using the given parametric functions, we can find:

x(2) = ∫ x'(t) dt = ∫ t sin(t) dt = -t cos(t) + sin(t) + C

where C is the constant of integration.

Since we want x(2), we can evaluate the above expression at t = 2:

x(2) = -2 cos(2) + sin(2) + C

Similarly, we can find:

y(2) = ∫ y'(t) dt = ∫ (5e^(-3t) + 2) dt = (-5/3)e^(-3t) + 2t + C'

where C' is the constant of integration.

Again, since we want y(2), we can evaluate the above expression at t = 2:

y(2) = (-5/3)e^(-6) + 4 + C'

Now we can find the derivatives x'(2) and y'(2) by taking the derivative of x(t) and y(t), respectively, and evaluating them at t = 2:

x'(2) = 2 sin(2) - cos(2)

y'(2) = (5/3)e^(-6)

Therefore, at t = 2, the particle is at the point (x(2), y(2)) = (-2 cos(2) + sin(2) + C, (-5/3)e^(-6) + 4 + C'), and the slope of the tangent line to the path of the particle at this point is given by:

dy/dx = (dy/dt)/(dx/dt) = y'(2)/x'(2)

Substituting the values we found:

dy/dx = [(5/3)e^(-6) + 4 + C']/(2 sin(2) - cos(2))

Since we don't have enough information to find the value of C', we cannot find an exact value for the slope. However, we can simplify the expression by using the trigonometric identities:

sin(2) = 2 sin(1) cos(1)

cos(2) = cos^2(1) - sin^2(1)

where we let t = 1 for simplicity. Then, we can substitute these expressions and simplify:

dy/dx = [(5/3)e^(-6) + 4 + C']/(4 sin(1) cos(1) - cos^2(1) + sin^2(1))

dy/dx = [(5/3)e^(-6) + 4 + C')/(4 sin(1) cos(1) - 1)

Therefore, the slope of the tangent line to the path of the particle at the point where t = 2 is given by the above expression.

Step-by-step explanation:

The slope of the tangent line to the path of the particle at the point where t=2 is approximately 1.55. To find the slope of the tangent line to the path of the particle at the point where t=2,

we need to use the derivatives of x(t) and y(t).

First, we can find the slope of the tangent line by using the formula:

slope = dy/dx = (dy/dt)/(dx/dt)

So, we need to find both dy/dt and dx/dt.

Given that x′(t)=t sin t, we can find dx/dt by taking the derivative of x(t):

dx/dt = x′(t) = t sin t

Given that y′(t)=5e−3t+2, we can find dy/dt by taking the derivative of y(t):

dy/dt = y′(t) = 5e−3t+2

Now, we can find the slope of the tangent line at t=2 by plugging in these values:

slope = (dy/dt)/(dx/dt) = (5e−3t+2)/(t sin t) = (5e−6+2)/(2 sin 2)

Therefore, the slope of the tangent line to the path of the particle at the point where t=2 is approximately 1.55.

Learn more about tangent line here:

brainly.com/question/31244717

#SPJ11

The  maximum allowable slope for a wheelchair ramp is 1/12 or approximately 0.0833.

a) The maximum allowable slope for a wheelchair ramp can be calculated using the ratio of the rise to the horizontal distance. According to federal building codes, the maximum rise is 1 inch for every 12 inches of horizontal distance. Therefore, the maximum allowable slope is:

Maximum allowable slope = Rise / Horizontal distance
= 1 inch / 12 inches
= 1/12

So, the maximum allowable slope for a wheelchair ramp is 1/12 or approximately 0.0833.

b) Let's assume that the maximum rise of the ramp is h and the corresponding horizontal distance is x. We can use the slope formula to find the slope of the ramp:

Slope = rise / run
= h / x

According to federal building codes, the maximum allowable slope is 1/12. Therefore, we can set up an equation to represent this:

h / x <= 1/12

Multiplying both sides by x, we get:

h <= x/12

So, the height of the ramp above the ground cannot exceed x/12. Therefore, the linear function that models the height of the ramp above the ground as a function of the horizontal distance x is:

h(x) = kx, where k is a constant that represents the slope of the ramp.

However, we know that the maximum allowable slope is 1/12. So, k must be less than or equal to 1/12. Therefore, the linear function that models the height of the ramp above the ground as a function of the horizontal distance x is:

h(x) = (1/12)x.

Visit to know more about Slope:-

brainly.com/question/16949303

#SPJ11

Using Table B at line 133, the consumers assigned to treatment 1 are those numbered 4, 5, 7, 1, and 8.

The table displaying the treatments in a design with two factors would be: | | Ambient scent | |----------|--------------| | Product density | Seashore (A) | Enclosed space (B) | No scent | | Jam-packed | 2 | 1 | 3 | | Minimally stocked | 4 | $ | 6 |

To randomly assign the 30 subjects to the six treatments, we would first label the subjects from 01 through 30. Then, we would use Table B starting at line 133 to randomly select the appropriate number of subjects for each treatment. For example, to randomly assign 5 consumers to treatment 1, we would use Table B to select 5 numbers from 01 through 30, and label those subjects as treatment 1. We would then repeat this process for each of the six treatments. An example of this would be: Assign = 5 consumers to each of the six treatments. Label the subjects from 01 through 30. Randomly select 5 numbers for treatment 1, then 5 of the remaining consumers for treatment 2, and so on. Using Table B at line 133, the consumers assigned to treatment 1 are those numbered 4, 5, 7, 1, and 8.

Learn more about Product density,

https://brainly.com/question/1354972

#SPJ11

We can proceed with finding the specific solution using either method mentioned above.

The order of the differential equation is 2.

Since the auxiliary equation has complex roots (±3i), we know that the general solution to the differential equation will involve sine and cosine functions.

To find the specific solution, we can use the method of undetermined coefficients or variation of parameters. However, we first need to check for any singular points or irregular singular points in the equation.

Since the coefficient of y is a polynomial in x and the coefficient of y" is also a polynomial in x, there are no singular points or irregular singular points in the equation.

Therefore, we can proceed with finding the specific solution using either method mentioned above.

To learn more about undetermined visit:

https://brainly.com/question/13202932

#SPJ11

The point V(3, 5) is reflected over the x axis, the new point is V'(3, -5)

Reflection is a type of transformation. Transformation is the movement of a point either up, left, right or down in the coordinate plane.

Reflection is a rigid transformation because it conserves the size and shape of the figure.

If a point A(x, y) is reflected over the x axis, the new point is A'(x, -y)

The coordinate of point V is (3, 5). If the point is reflected over the x axis, the new point is V'(3, -5)

Find out more on reflection at: https://brainly.com/question/26494295

#SPJ1

No, it is not possible for a binary relation to be both symmetric and antisymmetric because a relation cannot be both symmetric and antisymmetric unless it is the empty relation, as the properties of symmetry and antisymmetry contradict each other for non-empty sets.

A relation is symmetric if for any elements x and y in the set, if (x,y) is in the relation, then (y,x) is also in the relation. This means that the relation is symmetric around the diagonal.

On the other hand, a relation is antisymmetric if for any elements x and y in the set, if (x,y) is in the relation and (y,x) is in the relation, then x=y. This means that the relation is asymmetric around the diagonal.

If a relation is both symmetric and antisymmetric, then it means that for any elements x and y in the set, if (x,y) is in the relation, then (y,x) is also in the relation, and x=y. This implies that the relation is only defined on pairs of identical elements, and therefore it is the diagonal relation, which is reflexive, symmetric, and antisymmetric.

In summary, the only binary relation that is both symmetric and antisymmetric is the diagonal relation, which is defined as {(x,x) : x is an element of the set}.

To learn more about binary relation visit : https://brainly.com/question/13915405

#SPJ11

It is important to recognize and be aware of confirmation bias to engage in more unbiased and evidence-based thinking.

(a) To calculate the probability of dying from COVID conditional on being unvaccinated, Pr(D|U), using Bayes' rule, we can write:

Pr(D|U) = (Pr(U|D) * Pr(D)) / Pr(U)

Where:

Pr(D) is the probability of dying from COVID (unknown)

Pr(U|D) is the probability of being unvaccinated given that the person died from COVID (given as 0.53)

Pr(U) is the probability of being unvaccinated (unknown)

Similarly, to calculate the probability of dying from COVID conditional on being vaccinated, Pr(D|V), we can write:

Pr(D|V) = (Pr(V|D) * Pr(D)) / Pr(V)

Where:

Pr(V|D) is the probability of being vaccinated given that the person died from COVID (1 - Pr(U|D) = 1 - 0.53 = 0.47)

Pr(V) is the probability of being vaccinated at least once (given as 0.93)

The relative likelihood of dying with and without vaccination can be assessed by comparing Pr(D|U) and Pr(D|V). If Pr(D|U) is significantly higher than Pr(D|V), it suggests that being unvaccinated increases the likelihood of dying from COVID. If Pr(D|V) is close to or higher than Pr(D|U), it suggests that vaccination provides a protective effect against severe outcomes of COVID.

However, without knowing the value of Pr(D) (the overall probability of dying from COVID), we cannot make a specific comparison between Pr(D|U) and Pr(D|V). The calculation only provides conditional probabilities based on the given information.

To further analyze the relative likelihood, additional data or information on the overall probability of dying from COVID is needed.

(b) The type of error that people who believe vaccinations are not effective based on the almost equal fractions of vaccinated and unvaccinated deaths from COVID are committing is known as a "base rate fallacy."

The base rate fallacy occurs when individuals ignore or downplay the prior probabilities or base rates of events and focus solely on the conditional probabilities or specific outcomes. In this case, the base rate would be the overall vaccination rate in the population, which is not taken into account when comparing the fractions of vaccinated and unvaccinated deaths.

While it may be true that the fractions of vaccinated and unvaccinated deaths are similar, the base rate of vaccination in the population also needs to be considered. If a significant portion of the population is vaccinated, it is expected that there will be vaccinated individuals among the deaths, simply due to the larger number of vaccinated individuals.

To properly evaluate the effectiveness of vaccinations, it is important to compare the rates of COVID-related hospitalizations or deaths between vaccinated and unvaccinated individuals while taking into account the overall vaccination rate in the population. This broader analysis provides a more accurate assessment of the effectiveness of vaccines in preventing severe outcomes of COVID.

(c) The bias that is at work in this situation is known as "confirmation bias."

Confirmation bias refers to the tendency to selectively focus on or interpret information in a way that confirms pre-existing beliefs or hypotheses while ignoring or discounting evidence that contradicts those beliefs. In this case, individuals who already believe that vaccinations are not effective are exhibiting confirmation bias by concentrating their attention on the death rates of the entirely unvaccinated and disregarding the strong evidence for the efficacy of the vaccine.

Despite the information provided that only 1.7% of the deceased have received three doses of the vaccine while approximately 53% of the population has received three doses, individuals with confirmation bias tend to dismiss or downplay this evidence. They may actively seek out information or arguments that align with their preconceived notions while ignoring or dismissing information that challenges their beliefs.

Confirmation bias can hinder rational decision-making and prevent individuals from objectively evaluating new information or updating their beliefs based on the available evidence. It is important to recognize and be aware of confirmation bias to engage in more unbiased and evidence-based thinking.

To learn more about probability visit:

https://brainly.com/question/15124899

#SPJ11

The appropriate area of the composite figure with given dimensions is given by option b.  71.77cm² (nearest hundredth).

Composite figure consist of a triangle and rectangle from which semicircle is cut.

Diameter of the semicircle = 7cm

Radius of the semicircle 'r' = 3.5 cm

Area of the semicircle = ( 1/2) πr²

                                     = ( 1/2) × 3.14 × (3.5)²

                                     = 19.2325cm²

length of the rectangle = 10cm

Width of the rectangle = 7cm

Area of the rectangle = length × width

                                    = 10 × 7

                                     = 70cm²

base of the triangle = 7cm

height of the triangle = 6cm

Area of the triangle = ( 1/2) × base × height

                                = ( 1/2) × 7 × 6

                                = 21 cm²

Appropriate area  of the composite figure

= Area of the triangle + area of the rectangle - area of semicircle

= 21 + 70 - 19.2325cm²

= 71.7675cm²

= 71.77cm² ( nearest hundredth )

Therefore, the area of the composite figure is equal to option b.  71.77cm².

learn more about area here

brainly.com/question/30966932

#SPJ1

The distance of a circular path can be found using the formula for the circumference of a circle, which is C = πd.

The distance of a circular path can be calculated using the formula for the circumference of a circle. The circumference of a circle is the distance around the circle and can be found by multiplying the diameter of the circle by pi (π), which is a mathematical constant equal to approximately 3.14159.

The formula for the circumference of a circle is:

C = πd

where C represents the circumference of the circle, and d represents the diameter of the circle.

To calculate the distance of a circular path, we first need to know the circumference of the circle. If we know the radius of the circle, we can find the diameter by multiplying the radius by 2. Once we have the diameter, we can use the formula above to find the circumference.

Alternatively, if we know the length of the circular path or the angle through which we have traversed, we can use trigonometric functions to calculate the radius and then use the formula above to find the circumference.

To learn more about circular paths

https://brainly.com/question/28832526

#SPJ4

Complete question:

"What formula or equation can be used to calculate the distance of a circular path?"

The total radius of a cone with a radius of 4in and a height of 12in is 8in.

The total radius of a cone is the sum of the radius of the base and the slant height of the cone. The slant height of a cone can be found using the Pythagorean theorem, which states that the square of the slant height is equal to the sum of the square of the height and the square of the radius of the base.

So, to find the total radius of the cone, we need to calculate the slant height and add it to the radius of the base.

Slant height = sqrt(radius² + height²)

= √(4² + 12²)

= √(160)

= 12.65in (rounded to two decimal places)

Total radius = radius + slant height

= 4in + 12.65in

= 16.65in

≈ 8in (rounded to two decimal places)

Therefore, the total radius of the cone is approximately 8 inches.

Learn more about cone

https://brainly.com/question/30253224

#SPJ4

The area of the rectangle is 62.4 square centimeters.

The area of a rectangle is a measure of the amount of space enclosed by the rectangle in two-dimensional (2D) space. It is the product of the length and width of the rectangle, and is usually expressed in square units.

The area of a rectangle will be given by the formula;

Area = Length × Width

where "Length" represents the length of one side of the rectangle, and "Width" represents the length of the other side of the rectangle.

Given that the length of the rectangle is 9.6 cm and the width is 6.5 cm, we can substitute these values into the formula;

Area = 9.6 cm × 6.5 cm

Calculating the area using these values;

Area = 62.4 cm²

To know more about area of the rectangle here

https://brainly.com/question/8663941

#SPJ1

The total area is given as 1600 sq. ft

The formula used to calculate the area of a square is A = s^2, where "A" depicts the area and "s" represents the length of one side of the square.

This essentially means that the area obtained through this formula is equivalent to the outcome produced by squaring the measure for one of its sides.

To clarify, if an object in the shape of a square has a sidereal extension of 5 spatial units, then it's overall measurement will equal 25 quadrangular units (5 x 5 = 25).

It is particularly pertinent to note that expressions for physical space, such as those associated with centimeters, meters or even feet are invariably employed when referring to areas corresponding to squares.

Read more about area here:

https://brainly.com/question/25292087

#SPJ1

Answer:

D) The MEAN is the average of the numbers in the data set.

The correct statement is:

D) The MEAN is the average of the numbers in the data set.

In mathematics and statistics, the term "mean" refers to the average of a set of variables. There are various ways to determine the mean, including geometric means, harmonic means, and simple arithmetic means (putting the numbers together and dividing the result by the quantity of observations).

The statement about the mean provides a definition of a measure of central tendency and is a useful starting point in deciding which measure to use.

The other statements are not relevant to deciding which measure of central tendency to use.

A) The mode can be used for numerical data as well as non-numerical data.

B) The range is not a measure of central tendency, it is a measure of dispersion or variability.

C) The median is often used to avoid the effect of extreme values, but it is not specific to data sets with extreme values.

D) The Mean is the average of the numbers in the data set.

To learn more about the mean;

brainly.com/question/13451489

#SPJ2

This indicates that the project reduced the student council's savings by $96.

The price of the bags is as follows:

$8 bags x $6 each bag = $48.

Each backpack's paper and pens will set you back $6.

Consequently, the price of the paper and pens for all 8 bags x $6 each = $48.

Consequently, $48 + $48 = $96 is the total cost of the backpacks, paper, and pens.

Therefore, This indicates that the project reduced the student council's savings by $96. Since the project cost $96 to complete, the savings were reduced by that sum.

Learn more about cost here : brainly.com/question/28147009

#SPJ1

Answer:

I think its 42

Step-by-step explanation:

Hope u get the right answer!

The mean of the sample is 140 and the standard deviation of the sample is 3.572.

To determine the mean and standard deviation for a sample of 60 data points selected from a population with a mean of 140 and a variance of 13:

Step 1: Identify the population mean and variance.
The population mean (μ) is 140, and the population variance (σ²) is 13.

Step 2: Determine the sample mean.
The sample mean is equal to the population mean = 140.

Step 3: Calculate the standard error.
The standard error (SE) is the standard deviation of the sample mean, which is calculated as the square root of the population variance (σ) divided by the square root of the sample size (n). In this case, n = 60.

SE = σ / √n = √(13) / √(60) ≈ 0.4605

Step 4: Calculate the sample standard deviation.
The sample standard deviation (s) is equal to the standard error multiplied by the square root of the sample size.

s = SE * √n = 0.4605 * √(60) ≈ 3.572

So, for the sample of 60 data points, the mean is 140, and the standard deviation is approximately 3.572.

Know more about standard deviation here:

https://brainly.com/question/24298037

#SPJ11

All of the expressions are not a factor of the polynomial function 4x³ − 7x²+x+6

From the question, we have the following parameters that can be used in our computation:

The polynomial function 4x³ − 7x²+x+6

To check the expression that is not a factor, we set the expression to 0, solve for x and calculate the value of the polynomial at this x value

If the result is not zero (0), then it is not a factor of the polynomial

Using the above as a guide, we have the following:

x - 1 gives x = 1

So, we have

4(1)³ − 7(1)² + (1) + 6 = 4

x - 2 gives x = 2

So, we have

4(2)³ − 7(2)² + (2) + 6 = 12

x + 1 gives x = -1

So, we have

4(-1)³ − 7(-1)² + (-1) + 6 = -6

x + 2 gives x = -2

So, we have

4(-2)³ − 7(-2)² + (-2) + 6 = -56

None of the expressions give a solution of 0

Hence, all of the expressions are not a factor of the polynomial function

Read more about polynomial function at

https://brainly.com/question/7693326

#SPJ1

Answer:

69

Step-by-step explanation:

180-45=135

69 is the nearest angle degree.