Rank these cars in order of increasing momentum:

Car A: 1000 Kg moving at 20 m/s
Car B: 1200 Kg moving at 30 m/s Car C: 2000 Kg moving at 3 m/s

1. An increase in concentration increases the speed of reaction.

2. When temperature increases, average speed of molecules increases.

3. Average kinetic motion of molecules in a solution can be measured by measuring the heat in the solution.

As concentration increases, number of molecules in the solution increase, hence the reaction becomes faster. Since these factors increase in value, the frequency of collisions between the reactant molecules in the solution will increase, so the probability of collisions in right orientation and with right energy will be higher. Increase in temperature will increase the average speed and kinetic energy of the  molecules in solution. At constant volume, increased speed of reactant molecules in the solution will increase the probability of collisions in right orientation and right energy. Average kinetic energy of molecules in a solution can be measured using the equation, E=kT , where k = Boltzmann constant.

To know more about solutions, click here: https://brainly.com/question/25326161

#SPJ4

According to the question the molarity of the k2co3 solution will be 1.74 M.

In baked goods like cakes, wafers, and cookies, potash carbonate can take the place of bicarbonate. Foods become significantly healthier and retain a significant amount of their yeast power thanks to the reduction in salt content.

Breads, biscuits, or other baked products can be made using potassium carbonate instead of sodium hydroxide. As a result, meals become considerably healthier and retain a significant amount of their leavening power.

Molarity=No. of moles/Volume of Soln.

M= 6.97/4.00

M= 1.74M

To know more about potassium carbonate visit;

https://brainly.com/question/30231290

#SPJ4

Answer:

Going down a family means the elements are getting larger.  As more electrons surround the positively charged nucleus, they reduce the attractive electrostatic force because they are further away, and existing electrons repulse them.

Explanation:

Electronegativity is a measure of the attraction an element has for electrons.  Fluorine has a high electronegativity (2.98), while Francium does not (0.7).  Fluorine more readily attracts other electrons.  When going down a family on the periodic table, electronegativity decreases.  This is because the existing electrons have already filled the electron shells closest to the positive nucleus.  A new electron arriving near Francium doesn't experience the full attraction of the nucleus since it so far away.  The existing electrons form a repulsive barrier.

Answer:

The separation of sodium and chlorine from sodium chloride

Explanation:

When sodium chloride reacts with water to form the aquated sodium and chloride ions, the entropy increases and thus the reaction is spontaneous

18.26 grams of aluminum can be recovered from a 34. 5 g sample of Al2O3.

Al is the chemical element's symbol, and its atomic number is 13. Aluminum has a density that is around one third that of steel, which is lower than that of most common metals. It has a strong affinity for oxygen, and when exposed to air, creates a protective oxide coating on the surface. Aluminum visually resembles silver due to similarities in colour and light-reflecting properties.

2Al2O3 → 2Al + 3O2

Al2O3 has a molecular weight of 102.

Al's atomic weight is 27.

We may write from the stoichiometric equation:

It is possible to recover 54 g of Al from 102 g of Al2O3.

So, 18.26 g of Al may be recovered from 34.5 g of Al2O3 (54/102).

There fore  18.26 g of aluminium is recovered.

learn more about Aluminum Refer:brainly.com/question/19761029

#SPJ4

Covalent bonds are what occur when nearby atoms share electrons inside a molecule. Atoms share electrons in a covalent connection in order to reach their highest energy level.

Covalent bonds are also referred to as the valence shell because they have the right amount of electrons for a stable noble gas arrangement. Atoms can attain a more stable electron configuration and create a chemical bond because to this sharing of electrons.

The strength of the bond and the characteristics of the compound are determined by the amount of electrons shared, which is dependent on the number of electrons required to fill the valence shells of the atoms involved.

However, certain metal atoms may also create covalent bonds with non-metal atoms. Covalent bonds are commonly formed between non-metal elements. It is significant to remember that there are other types of bonds besides covalent ones, including ionic and metallic bonds.

learn more about Atoms  here:

https://brainly.com/question/1566330

#SPJ4

Answer:

ZnS

Explanation:

Because there are two tetrahedral holes per anion (sulfide ion) and one-half of these holes are occupied by zinc ions, there must be 1 2 1 2 × 2, or 1, zinc ion per sulfide ion. Thus, the formula is ZnS. Check Your Learning

Since the equation for the given reaction is balanced, one mole of AgCl is created for every mole of CaCl2 that reacts. We may utilize the molar mass of CaCl2, which is (40.078 g/mol + 2*35.453 g/mol) = 111.012 g/mol.

to get the number of moles. Molar mass divided by mass equals a mole. moles equal 30 g / 111.012 g/mol, or 0.270 mol. CaCl2 and AgCl react 1:1, hence 0.270 mol of AgCl will be created from 0.270 mol of CaCl2 in this reaction. We may use the molar mass of AgCl, which is (107.868 g/mol + 35.453 g/mol) = 143.321 g/mol, to get the mass of AgCl created. mass is determined by multiplying the number of moles by the molar mass. mass = 143.321 g/mol x 0.270 mol, or 38.89 g Therefore, 38.89 g of AgCl will In chemistry, a mole is a unit of measurement that is used to represent how much a chemical compound is present. Avogadro's number, or 6.022 x 1023, of particles makes up one mole of a material. The mole is an useful way to express extremely large amounts of atoms, ions, or molecules since this quantity is so huge. The mole is based on the mass and number of atoms or molecules in a sample of a material.

learn more about  mole here:

https://brainly.com/question/26416088

#SPJ4

To estimate the minimum detectable concentration of H2O2, we need to determine the amount of heat released during the reaction between catalase and hydrogen peroxide and compare it with the minimum detectable temperature rise. The reaction between catalase and hydrogen peroxide can be represented as follows:

2H2O2 (aq) + Catalase --> 2H2O (l) + O2 (g)

The amount of heat released during the reaction can be calculated using the equation:

ΔH = - n * ΔH°

Where n is the number of moles of H2O2 and ΔH° is the standard enthalpy of reaction for the reaction between catalase and hydrogen peroxide. The standard enthalpy of reaction can be estimated from the standard enthalpies of formation of the reactants and products.

Since the heat released by the reaction is proportional to the number of moles of H2O2, we can calculate the minimum detectable concentration of H2O2 by dividing the minimum detectable heat release by the heat capacity of the hydrogen peroxide solution and the ΔH°.

Assuming a heat capacity of 4.184 kJ/kg/K for the hydrogen peroxide solution and a temperature rise of 0.02oC, the minimum detectable heat release can be calculated as follows:

ΔQ = mcΔT

Where m is the mass of the hydrogen peroxide solution and c is the heat capacity.

Let's assume the mass of the hydrogen peroxide solution is 100 g. Then, the minimum detectable heat release can be calculated as follows:

ΔQ = (100 g) * (4.184 kJ/kg/K) * (0.02 K) = 0.83 kJ

The minimum detectable concentration of H2O2 can then be calculated as follows:

n = ΔQ / ΔH°

learn more about  hydrogen here:

brainly.com/question/28937951

#SPJ4

The complete chemical formula for the unknown compound P₄Sₓ  is  P₄S₆.

The given unknown compound has the formula P₄Sₓ , where P stands for phosphorus and S stands for sulphur. "X" stands for a whole number which denotes the number of sulphur atoms in the compound.

To determine the value of "X" we need to know the ratio between P and S. There are 4 phosphorus atoms present in the compound.

Since it is given that, we have 6.3 moles of phosphorus(P) and 9.4 moles of sulphur (S). In order to express this in terms of 1, we can divide both sides by 6.3 moles to get a ratio of 1 to 1.5

P= 6.3/6.3= 1

S= 9.4/6.3=1.5

This implies, for every 1 P, there is 1.5 S . So, for 4 P we get;

P= 1× 4= 4

S= 1.5× 4= 6

Thus, for every 4 P we will have 6 S.

Hence, the complete chemical formula is P₄S₆.

To know more about chemical formula here

https://brainly.com/question/13208174

#SPJ4

Answer: Neutron

Explanation:

Protons have a positive charge (+).

Electrons have a negative charge (-).

Neutrons have no charge.

Water is necessary for life. b) Nearly colorless property of water has the least impact on life

While all of the properties of water are important for life, the property of being nearly colorless is the one that affects life the least. The other properties, such as hydrogen bonding, cohesiveness, high heat capacity, and high heat of vaporization, all play critical roles in the functioning of living organisms and the environment. Hydrogen bonds between water molecules give water its high surface tension, which allows for the cohesion of water molecules that allows for the movement of water in plants, and the cohesion and adhesion property of water that allows for the movement of water in rivers and oceans. High heat capacity and high heat of vaporization are also important for maintaining a stable temperature range for living organisms.

Learn more about hydrogen bonding here:

https://brainly.com/question/15099999

#SPJ4

The identity of the metal that has a mass of 45.9g and volume or 17.0mL is aluminium (2.7g/mL) (option B).

Density is the measure of the mass of matter contained by a unit volume. The density of a substance can be calculated using the following formula;

Density = mass ÷ volume

According to this question, if a sample of metal has a mass of 45.9g and occupies a volume of 17.0 mL, the density can be calculated as follows:

Density = 45.9g ÷ 17.0mL

Density = 2.7g/mL

Therefore, the identity of the metal is aluminium with a density of 2.7g/mL.

Learn more about density at: https://brainly.com/question/6107689

#SPJ1

Answer:

Therefore, the mass of 3.24 x 10^-15 molecules of CO2 is approximately 7.304 x 10^-14 grams.

Explanation:

To calculate the mass of a certain number of molecules of a substance, you need to know the molar mass of the substance and convert the number of molecules to moles.

The molar mass of CO2 is 44.01 g/mol. To convert the number of CO2 molecules to moles, we can use Avogadro's number which is 6.022 x 10^23.

So, moles of CO2 = (3.24 x 10^-15 ) / (6.022 x 10^23)

mass of CO2 = moles * molar mass = (3.24 x 10^-15 ) / (6.022 x 10^23) * 44.01 g/mol = 7.304 x 10^-14 g

Therefore, the mass of 3.24 x 10^-15 molecules of CO2 is approximately 7.304 x 10^-14 grams.

Water is released and passes through a turbine to produce electricity.

A mechanical device called a turbine transforms the kinetic energy of moving water into mechanical energy. A generator is then used to turn this mechanical energy into electrical energy. A shaft connects the turbine and generator, allowing the turbine to spin the generator and generate power. The turbine's blades spin as the water passes past it, spinning the generator, which produces power. This method is referred to as hydropower and is a renewable energy source.

The ideas Faraday established form the foundation of how a generator works. He discovered that moving a magnet past a conductor makes electricity flow. In a large generator, electromagnets are made by circulating direct current through loops of wire wound around stacks of magnetic steel laminations. These are called field poles and are mounted on the perimeter of the rotor.

To learn more about hydroelectric power generation:

https://brainly.com/question/8934285

#SPJ4

We can calculate the number of moles of magnesium that is equivalent to the bromobenzene used:

n_Mg = n_Br * 1.25 = 0.020mol * 1.25 = 0.025mol

Finally, we can calculate the mass of magnesium:

m = n * M

m = 0.025mol * 24.31 g/mol = 0.6 g.

So the mass of magnesium turnings equivalent to the amount of bromobenzene used is 0.6 g.

A molar equivalent is a unit of measurement that corresponds to the number of moles of a reactant that is needed to react with one mole of another reactant.

Bromobenzene is a clear, colorless liquid with a pleasant odor. It is primarily used as a solvent and motor oil additive, and in making other chemicals.

To know more about solvent, visit here:

https://brainly.com/question/14797683

#SPJ4

Basalt is an ingenious salt which is found near the surface. Limestone fossils are found in sedimentary sequences and they are old by 2.7 billion years. Sand stones with trilobites are old about 500 million years.

Rocks are the major parts of the tectonic plates of earth, There are broadly three classes of rocks namely, sedimentary rocks, igneous rocks and metamorphic rocks.

Basalt is a type of well grained igneous rocks found near the surface of earth. Rapid cooling of lava rich in Mg and Ca composes Basalt rock

Limestone, a form of carbonate sedimentary rock composed primarily of calcium carbonate (CaCO3). The minerals calcite and aragonite, which are various crystal forms of CaCO3, make up the majority of its material. When these minerals separate from water that has dissolved calcium, limestone is created.

Sileous sandstone is a typical component of nearshore deposits about 500-600 million years of age. This often grades into siltstone and shale as it moves into the sea, with finer-grained sediment accumulating in deeper water to create these rocks.

Shale rocks with ammonites have an age of about 70 million years. Ammonites are spiral shaped fossilized shells of marine animals.

Find more on rock types:

https://brainly.com/question/30016535

#SPJ1

The chemical formula for ferric ion (Fe3+) is Fe(III) or Fe3+. To calculate the number of ions contained in a given quantity of a material, multiply the number of moles by FeBr3 Avogadro's number.

There would be 1.00 x Avogadro's number of Fe(III) ions in 1.00 mole of Fe(III) (FeBr3). The value of Avogadro's number is 6.022 x 1023 atoms or ions per mole. So there are roughly 6.022 x 1023 Fe(III) ions in 1.00 mole of FeBr3. Although commercially accessible at a low cost, FeBr3 may be made by treating iron metal with bromine:2 Fe+3 Br2 2 FeBr3 FeBr3 decomposes to ferrous bromide over 200 °C: 2FeBr3 + Br2 = 2FeBr2 + Br2 Because chlorine has a higher oxidizing activity, iron(III) chloride is much more stable. FeI3 is unstable because iron(III) oxidizes.For every mole of iron (III) bromide, which has the formula FeBr3 F e B r 3, three moles of bromide ions are present. The chemical compound with the formula FeBr3 is iron(III) bromide.

learn more about FeBr3  here:

https://brainly.com/question/8430600

#SPJ4

Answer:To find the amount of energy needed to warm the piece of copper from 11°C to 27°C, you can use the formula:

Energy = (mass of copper) x (specific heat of copper) x (change in temperature)

So in this case, the energy would be:

Energy = (3.8 grams) x (0.32 Joules/((1g)(1°C))) x (27°C - 11°C)

Energy = 3.8 x 0.32 x 16

Energy = 12.288 Joules

Therefore, 12.288 Joules of energy is needed to warm the piece of copper from 11°C to 27°C.

Explanation:

A molecule will always be polar if it has polar bonds.

For a molecule to be polar, it must have polar bonds and have those bonds organized in such a way that the bond dipoles do not cancel each other out. Molecules that are polar have both positively and negatively charged parts. A common polar substance is water. Because of its structure and the types of bonds it contains, the molecule has a slight positive charge at one end (the hydrogen end) and a slight negative charge at the other (the oxygen end). Due to the uneven distribution of electrons among the atoms and the asymmetrical nature of the water molecule, the hydrogen atoms at one pole of the molecule are positively charged, while the oxygen atoms at the other pole are negatively charged (side). We use the term "electrically polar" to describe the water molecule.

To learn more about polar molecule, click here:

https://brainly.com/question/13992278

#SPJ4

The prediction that is supported by the information in the table is: "K will give up an electron more easily than Br."

This can be determined by looking at the electron configuration of K and Br. Potassium (K) is located in group 1 of the periodic table and has one valence electron in its outermost shell. Bromine (Br) is located in group 17 of the periodic table and has seven valence electrons in its outermost shell. The closer an element is to the edge of a group, the more likely it is to lose electrons and form a positive ion (cation). As K is closer to the edge of group 1 and has fewer valence electrons than Br, it is more likely to lose an electron and become a cation, K+.

To know more about electron please refer: https://brainly.com/question/28977387

#SPJ4

Carbohydrates usually contain a carbonyl (=O) and hydroxyl (−OH) functional group.

Carbonyl (=O) and hydroxyl (=OH) functional groups are typically present in carbohydrates. In polysaccharides, where the hydroxyl groups typically establish hydrogen bonds with the carbonyl groups, the carbonyl group joins with a carbon atom to form a ring structure. Amino, carboxyl, and R are the functional groups found in proteins (variant). Note: Complex assemblies are created when proteins interact with other biological macromolecules and one another.

Based on the functional monomer found in carbs, this classification was created. Ketone and aldehyde serve as monomers in carbohydrates. That suggests that carbs are divided into aldose and ketose. Depending on how many carbon atoms there are, carbohydrates can be divided into numerous categories.

Learn more about carbohydrates here:

https://brainly.com/question/29775112

#SPJ4

The Maillard reaction creates brown pigments in cooked meat in a very specific way: by rearranging amino acids and certain simple sugars, which then arrange themselves in rings and collections of rings that reflect light in such a way as to give the meat a brown color.

The advanced Maillard reaction involves breaking down the Amadori product into a variety of fission products that are composed of the sugar-amino complex. In the ultimate Maillard reaction, amino compounds and sugar fragments condense to form polymerized proteins and brown pigments called melanoidins. In the Maillard reaction, an organic chemical process, reducing sugars and amino acids combine to create a complex brew of chemicals. The distinct flavour and aroma of browned food are the result of this process. The French chemist Louis Camille Maillard's name is associated with the Maillard reaction.

Learn more about amino acids here:

https://brainly.com/question/13266141

#SPJ4

When 1,1-dibromo-4-methylhexane is treated first with excess sodium amide and quenched with water will give 1-bromo-4-methylhexane as the final product. This reaction is a reductive amination.

Here the sodium amide acts as a reducing agent to convert the C=C double bond into a C-C single bond and the nitrogen atom acts as a nucleophile to displace the bromine atom. The catalytic hydrogenation is then used to reduce the remaining C-Br bond to a C-H bond, which results in 1-bromo-4-methylhexane.

Learn more about Catalysis here: https://brainly.com/question/27950063

#SPJ4

The NaCl solution has a 1.7 L volume.

Molarity (M) is calculated by dividing the volume of the solution (V) in liters by the number of moles of solute (n). Not moles of solute per liter of solvent, but rather moles of solute per liter of solution, is a crucial distinction to make when defining molarity.

The volume of the NaCl solution is 1.7 L.

First step: Information is given

The molarity of sodium chloride is 1.8 M.

The mass of sodium chloride is 175 grams.

The molecular weight of sodium chloride is 58.44 g/mol.

Step 2: Calculate the moles of sodium chloride.

Mass NaCl divided by molar mass NaCl equals moles of NaCl.

58.44 grams/mole of sodium chloride, or 175.0 grams

2.995 moles are equal to one NaCl mole.

3. Calculate the volume of the solution.

Ratio of volume to mole

Volume equals Molarity times Molar NaCl.

Volume = 1.9 M / 2.995 M

= 1.66 to 2.7 liters in volume.

The NaCl solution has a 1.7 L volume.

To learn more about volume of solution from given link

https://brainly.com/question/14502489

#SPJ1

Complete Question -

Calculate the volume in liters of a 1.8M sodium chloride solution that contains 175. g of sodium chloride (NaCI). Round your answer to 2 significant digits.

At room temperature in a vacuum, the distance r in nanometers beyond which the interaction energy between a barium ion and a bromide ion drops below kt is 334400 nm.

The electrostatic force between two charges is expressed mathematically as, [tex]F_e=k\frac{Q_1\times Q_2}{r^2}[/tex] where Q₁ and Q₂ represent the charges, r represents the distance between the charges, and k (9×10⁹ Nm²/C²) represents the Coulombs constant.

Also, charge on Barium,

[tex]\begin{aligned}Q_1&=+2p\\&= \mathrm{2\times1.6\times10^{-19}\;C}\\&= \mathrm{3.2\times10^{-19}\;C}\end{aligned}[/tex]

The charge on Bromide ion,

[tex]\begin{aligned}Q_2&=-1p\\&= \mathrm{-1\times1.6\times10^{-19}\; C} \\&= \mathrm{-1.6\times10^{-19}\; C}\end{aligned}[/tex]

Then,

[tex]\begin{aligned} F_e&=\frac{(9\times10^9\times 3.2\times10^{-19}\times1.6\times10^{-19})}{r^2}\\&= \frac{(46\times10^{-29})}{r^2}\end{aligned}[/tex]

Also, F= kT where k represents the Boltzmann constant and T represents the room temperature (298 K).

Then,

[tex]\begin{aligned}F&=\mathrm{1.38\times10^{-23}\;J/K\times298\;K}\\&=\mathrm{41.124\times 10^{-22}\; J}\end{aligned}[/tex]

Solving both forces,

[tex]\begin{aligned}\frac{46\times10^{-29}}{r^2}& = 41.124 \times 10^{-22}\\r^2&=\frac{46\times10^{-29}}{41.124 \times 10^{-22}}\\&=1.1185\times10^{-7}\\r&=\mathrm{3.344\times10^{-4}\;m}\\&=\mathrm{334400\;nm}\end{aligned}[/tex]

The required answer in nanometers is 334400 nm.

To know more about electrostatic force:

https://brainly.com/question/9774180

#SPJ4

Moles=Concentration x Volume

Moles = 0.100 x (75/1000) = 0.0075 moles.

We can use the molar mass of AgCl to calculate the mass of AgCl precipitate formed:

Mass of AgCl = moles of AgCl x molar mass of AgCl

mass of AgCl = 0.0075 moles x 143.32 g/mole

mass of AgCl = 1.07 g

It is well verified that AgCl is insoluble in water while NaCl and KCl are soluble. Hence, AgCl is very much less soluble than NaCl or KCl.

The base of silver is weak, whereas chlorine acid is strong. When the weak base responds with a strong acid, it forms acidic salt. It indicates the salt that produces acidic pH, becomes a base when liquefied in water.

To know more about acid, visit here:

https://brainly.com/question/14072179

#SPJ4

The concentration of the unknown acid is calculated to be 9.6605/ volume of the unknown acid

The following formula can be used to calculate the concentration of the unknown acid;

as we know moles is concentration multiply by volume

so,

C₁V₁ = n₁

C₂V₂ = n₂

Where C is concentration v is volume and n is moles. C₁V₁ is unknown acid and  C₂V₂ is KOH

At the equivalence point;

n₁ =n₂

Therefore;

C₁V₁ =  C₂V₁

Assuming that the volume of KOH is 13.90 ml and that (concentration of the unknown acid) = 0.695 M

Therefore, C₁ or concentration of unknown acid can be calculated as follows;

C₁V₁ =  C₂V₂

C₁ =  C₂V₂ /  V₁

C₁ =  0.695 x 13.90  / V₁

Ca = 9.6605 / V₁

Learn more about concentration https://brainly.com/question/13024825

#SPJ4