The correct statement about reducing agents such as active metals and some metal hydrides is: They often produce hydroxide and flammable H2 when reacting with water. Therefore the correct option is option C.
A substance that contributes electrons to another chemical species, reducing it, is known as a reducing agent. Strong reducing agents include several metal hydrides as well as active metals including sodium, potassium, and calcium. These reducing substances have the ability to form hydroxide ions (OH-) and hydrogen gas (H2) when they come into contact with water.
Therefore, reducing agents like active metals and some metal hydrides are not inert and can react with water to form hydroxide and combustible H2. To avoid mishaps, it is crucial to handle these reducing agents carefully and take the necessary safety measures. Therefore the correct option is option C.
For such more question on hydroxide:
https://brainly.com/question/21393201
#SPJ11
For the following error, select the answer that correctly describes how it will affect the value of the final temperature of the water/solution in the calorimeter:
Some of the NH4NO3 solid was spilled on the lab bench and not successfully added to the calorimeter.
When some of the NH4NO3 solid is spilled on the lab bench and not successfully added to the calorimeter, it will affect the final temperature of the water/solution in the calorimeter.
A calorimeter is a device used to measure the heat of a chemical reaction or physical change. In this case, the reaction between NH4NO3 and water is being measured.Since a smaller amount of NH4NO3 is added to the calorimeter, the reaction's heat production will be less than expected. As a result, the temperature change of the water/solution in the calorimeter will be smaller. This means that the final temperature of the water/solution will be higher than it would have been if the correct amount of NH4NO3 had been added.In summary, spilling some of the NH4NO3 solid on the lab bench and not adding it to the calorimeter will cause the final temperature of the water/solution in the calorimeter to be higher than expected, as less heat is produced by the reaction with a smaller amount of NH4NO3.
Learn more about calorimeter here
https://brainly.com/question/2963957
#SPJ11
Consider the titration of 50. 0 ml of 0. 318 m weak base b (kb = 7. 5 x 10⁻⁶) with 0. 340 m hno₃. What is the ph of the solution before any strong acid has been added? b After 30. 0 mL of HNO: have been added, identify the primary species left in the solution
The pH of the solution before the addition of any strong acid is 12 and the primary species left in the solution are mixture of the weak base and conjugate acid.
a) Before any strong acid has been added, the solution contains only the weak base B. To find the pH of the solution, we can use the expression for the base dissociation constant:
Kb = [BH⁺][OH⁻]/[B]
At equilibrium, we can assume that [OH⁻] ≈ [BH⁺], since the base is weak and only partially dissociates. Therefore:
Kb = [OH⁻]²/[B]
[OH⁻]² = Kb[B]
[OH⁻] = √(Kb[B]) = √(7.5×10⁻⁶ mol/L × 0.318 L) ≈ 5.4×10⁻³ mol/L
Since Kw = [H⁺][OH⁻], we can find the [H⁺] concentration:
Kw = [H⁺][OH⁻]
[H⁺] = Kw/[OH⁻]
= 1.0×10⁻¹⁴ mol²/L² ÷ 5.4×10⁻³ mol/L
≈ 1.9×10⁻¹² mol/L
The pH of the solution is then:
pH = -log[H⁺] ≈ 12
The pH of the solution is therefore roughly 12 prior to the addition of any strong acids.
b) After adding 30.0 mL of HNO₃, we have added:
n(HNO₃) = C(V) = 0.340 mol/L × 0.0300 L = 0.0102 mol
Since the base is weak, we can assume that all of the added HNO₃ reacts with the base, and that the solution is still basic. The base will be partially neutralized to form the conjugate acid BH⁺, which is also weak. The primary species left in the solution will be a mixture of the weak base B, its conjugate acid BH⁺, and any excess HNO₃ that has not reacted with the base.
To know more about pH value, visit,
https://brainly.com/question/26424076
#SPJ4
find the total energy released in mev if 1.8 kg of 23592u were to undergo fission entirely by this reaction.
Fission is a nuclear reaction in which the nucleus of an atom splits into two or more smaller nuclei, along with the release of a large amount of energy. In the case of 23592U, fission occurs when it absorbs a neutron, splitting into two smaller nuclei and releasing several neutrons, as well as a significant amount of energy.
To calculate the total energy released in MeV if 1.8 kg of 23592U were to undergo fission entirely by this reaction, we need to use the equation E=mc². Here, E represents the energy released, m represents the mass of the uranium, and c represents the speed of light. The mass of 1.8 kg of 23592U can be converted to atomic mass units (amu) by dividing by Avogadro's number, which gives us approximately 1.08 x 10²⁵ amu. The energy released per fission of 23592U is approximately 200 MeV. Thus, the total energy released by the fission of 1.8 kg of 23592U can be calculated as follows: E = mc² E = (1.08 x 10²⁵ amu) x (1.66 x 10⁻²⁷ kg/amu) x (2.998 x 10⁸ m/s)² x (2 fissions/atom) x (200 MeV/fission) E = 3.88 x 10¹⁷ J Converting this to MeV, we get: E = (3.88 x 10¹⁷ J) / (1.602 x 10⁻¹³ J/MeV) E = 2.42 x 10³⁰ MeV Therefore, if 1.8 kg of 23592U were to undergo fission entirely by this reaction, it would release a total energy of approximately 2.42 x 10³⁰ MeV.
Learn more about neutrons here-
https://brainly.com/question/28992636
#SPJ11
questions 4-7 are related to the following organic synthesis reaction. there are four total reactions associated with this reaction sequence. questions 4 and 5 will be multiple choice and questions 6 and 7 will be short answer. question 4 - what is the necessary reagent to accomplish step 1 of this reaction sequence?
To accomplish step 1 of this organic synthesis reaction, the necessary reagent is sodium hydride (NaH). This is a strong base commonly used in organic synthesis to remove acidic hydrogen atoms and form new carbon-carbon bonds. In this reaction, NaH is used to deprotonate the alpha carbon of the ketone, forming an enolate ion.
The enolate ion then attacks the electrophilic carbon of the ester in an aldol condensation reaction, resulting in the formation of a beta-hydroxyketone product.
NaH is preferred over other bases because it is highly reactive and can be easily removed from the reaction mixture by filtration. Additionally, it does not add any unwanted byproducts to the reaction, making it a clean and efficient choice. Other bases, such as potassium tert-butoxide or lithium diisopropylamide (LDA), could also be used in this reaction, but NaH is often the preferred choice due to its high reactivity and ease of use.
for more such questions on sodium hydride
https://brainly.com/question/13061869
#SPJ11
4. Which type of nuclear reaction has the reactants with a greater mass than the products?
Fusion
Fission
Answer:
NUCLEAR FISSION
Explanation:
According to Einstein's equation, E = mc2, where
m
is the mass and
c
is the speed of light states that mass can be converted to energy and vice-versa. In nuclear fission, the mass of reactants is more than mass of the products. The difference in mass is called the mass defect. This mass is converted into energy
Methane (CH4) is used in laboratory burner. When 1 mole of methane burns at constant pressure, it produces 804 kJ of heat and does 3 kJ of work.1. What is the value of ÎHÂ for the combustion of one mole of methane?2. What is the value of ÎEÂ for the combustion of one mole of methane?
The answers are 1. the value of ΔH° for the combustion of one mole of methane is -801 kJ/mol and 2. the value of ΔE° for the combustion of one mole of methane is also -801 kJ/mol.
1. The value of ΔH° for the combustion of one mole of methane can be calculated using the first law of thermodynamics:ΔH° = ΔE° + PΔVWhere ΔE° is the change in internal energy of the system, P is the pressure, and ΔV is the change in volume. Since the combustion is done at constant pressure, ΔV is equal to the volume of the gaseous products minus the volume of the gaseous reactants, which is negligible. Therefore, we can assume that ΔV is zero and simplify the equation to:ΔH° = ΔE° + PΔV = ΔE°Given that 1 mole of methane produces 804 kJ of heat and does 3 kJ of work, the change in internal energy can be calculated as:[tex]ΔE° = q + w = -804 kJ + 3 kJ = -801 kJ/mol[/tex]Therefore, the value of ΔH° for the combustion of one mole of methane is -801 kJ/mol.2. The value of ΔE° for the combustion of one mole of methane can be calculated using the same equation as above:[tex]ΔE° = q + w = -804 kJ + 3 kJ = -801 kJ/mol[/tex]Therefore, the value of ΔE° for the combustion of one mole of methane is also -801 kJ/mol.The difference between ΔH° and ΔE° is that ΔH° accounts for any work done by the system, while ΔE° only accounts for the change in internal energy of the system. In this case, since the work done is negligible compared to the heat produced, the values of ΔH° and ΔE° are almost identical.For more such question on combustion
https://brainly.com/question/24113573
#SPJ11
Given the following nucleoside or nucleotide, identify the correct name or abbreviation.cytidine deoxyuridine uridine CDP deoxycytidine
The specific names and abbreviations of nucleosides and nucleotides depend on the specific nitrogenous base and sugar present, all the answers are below:
Cytidine is a nucleoside composed of the pyrimidine base cytosine and the five-carbon sugar ribose. Deoxyuridine is a nucleoside composed of the pyrimidine base uracil and the sugar deoxyribose. Uridine is a nucleoside composed of the pyrimidine base uracil and the sugar ribose. CDP, or cytidine diphosphate, is a nucleotide composed of the nucleoside cytidine, two phosphate groups, and one diphosphate group. Deoxycytidine is a nucleoside composed of the pyrimidine base cytosine and the sugar deoxyribose.In summary, nucleosides are composed of a nitrogenous base and a sugar molecule, while nucleotides are composed of a nucleoside, one or more phosphate groups, and other functional groups. The specific names and abbreviations of nucleosides and nucleotides depend on the specific nitrogenous base and sugar present.For more such question on abbreviations
https://brainly.com/question/14587349
#SPJ11
What happens if an air conditioner is used in a house that is not well insulated and not well sealed?
Several problems can happen if an air conditioner is operated in a house that is not properly sealed and insulated.
Higher energy costs may result from the air conditioner having to work harder to maintain the intended temperature.
Through fractures, gaps, and inadequately insulated walls, the cold air generated by the air conditioner may escape the home, causing uneven cooling and discomfort for the residents.
Learn more about air conditioner at:
https://brainly.com/question/13143746
#SPJ1
true or false,an orbital is a probability map showing exactly where an electron can be found in an atom.
True, an orbital is a probability map showing exactly where an electron can be found in an atom. In an atom, electrons reside in specific regions called orbitals. These orbitals describe the probability distribution of an electron's position in a three-dimensional space around the nucleus of the atom. An orbital does not show the exact path or trajectory of an electron, but it provides a representation of the regions where an electron is most likely to be found.
There are various types of orbitals, such as s, p, d, and f orbitals, which differ in their shapes and energies. Electrons within these orbitals are organized into energy levels or shells. As you move away from the nucleus, the energy levels and the number of electrons in each shell increase. The distribution and arrangement of electrons in orbitals play a vital role in determining the chemical and physical properties of an atom.
In summary, an orbital represents a probability map that indicates the most likely locations for an electron within an atom, providing valuable information about the atom's structure and behavior.
For more information on energy levels see:
https://brainly.com/question/29736874
#SPJ11
Energy is the ________.
A) work that has been done
B) motion that moves things
C) amount remaining to do work in the future
D) capacity to do work
E) chemical bonds between atoms and molecules
Energy is the capacity to do work. Therefore the correct option is option D.
A force acting over a distance is what is meant by the term "work" in physics. Energy is the capacity to exert a force across a distance or to perform labour.
Kinetic energy (energy of motion), potential energy (energy held in an object due to its position or state), thermal energy (energy resulting from the motion of atoms and molecules), and electromagnetic energy (energy carried by electromagnetic waves, such as light) are only a few examples of the various forms that energy can take.
Even though it might be connected to an object's motion, energy is not the same as actual motion. Chemical bonds between atoms and molecules can also be related to energy because they need energy to be released or input in order to break or form. Therefore the correct option is option D.
For such more question on Energy:
https://brainly.com/question/29339318
#SPJ11
the pressure exerted by a gas on its container is directly proportional to select one: a. the volume of the container. b. the mass of the individual gas molecules. c. the centigrade temperature of the gas. d. the number of molecules of gas in the sample. e. the fahrenheit temperature of the gas.
The pressure exerted by a gas on its container is directly proportional to the volume of the container. This relationship is known as Boyle's Law, named after the physicist Robert Boyle who first discovered it in the 17th century. Boyle's Law states that when the temperature of a gas remains constant, the pressure and volume of the gas are inversely proportional to each other. In other words, as the volume of the container decreases, the pressure of the gas increases, and vice versa.
This relationship can be explained by the behavior of gas molecules. When a gas is contained in a container, its molecules are constantly colliding with the walls of the container. The more molecules there are, the more collisions there will be, and the greater the pressure will be. However, if the volume of the container is decreased, there will be less space for the molecules to move around in, so they will collide more frequently with the walls of the container, resulting in a higher pressure.
In contrast, the mass of the individual gas molecules, the centigrade temperature of the gas, and the fahrenheit temperature of the gas do not have a direct effect on the pressure exerted by the gas on its container. These factors may affect other properties of the gas, such as its density or its behavior under different conditions, but they are not directly related to Boyle's Law. Similarly, the number of molecules of gas in the sample may affect the pressure of the gas, but only insofar as it affects the volume of the container, which is the primary determinant of pressure in Boyle's Law.
for more such questions on volume
https://brainly.com/question/29796637
#SPJ11
Give the common name for each of the following molecular compounds.
NH3 is ___ and H2O is ___ .
NH3 is commonly known as ammonia and H2O is commonly known as water. Molecular compounds are formed by the combination of two or more non-metal elements.
These compounds are also known as covalent compounds as they are held together by covalent bonds. Covalent bonds are formed by the sharing of electrons between two atoms. Molecular compounds are characterized by their low melting and boiling points and are generally poor conductors of electricity.
NH3, which is ammonia, is a colourless gas with a pungent odour. It is used in the production of fertilizers, cleaning agents, and as a refrigerant. NH3 is composed of one nitrogen atom and three hydrogen atoms. It is a basic compound and reacts with acids to form ammonium salts.
H2O, which is water, is a colourless, odourless, and tasteless liquid. It is essential for all forms of life on Earth and is the most common substance on Earth's surface. Water is composed of two hydrogen atoms and one oxygen atom. It is a polar compound, which means it has a positive and negative end. Water is a versatile solvent and is capable of dissolving many substances.
In conclusion, NH3 is commonly known as ammonia and H2O is commonly known as water. These molecular compounds have unique properties and are essential to life on Earth.
To learn more about molecular compounds, refer:-
https://brainly.com/question/30328923
#SPJ11
Which pair of properties describes the elements in Group 18?
F. They are chemically stable and liquid at room temperature.
G. They have eight valence electrons and are flammable.
H. They are magnetic and boil at low temperatures.
J. They are gaseous at room temperature and chemically stable
The correct option is J, They are gaseous at room temperature and chemically stable" which correctly describes the properties of the elements in Group 18.
Room temperature is typically defined as the temperature range at which a substance or reaction is carried out under normal laboratory conditions, without the need for specialized equipment or procedures to control the temperature. Room temperature is usually considered to be around 20-25 degrees Celsius (68-77 degrees Fahrenheit), although this can vary slightly depending on the specific laboratory or experiment.
At room temperature, most common substances are in a stable, solid or liquid state, and many chemical reactions can take place at a reasonable rate without the need for additional heating or cooling. However, it is important to note that certain reactions or materials may require more precise temperature control in order to ensure accurate results or prevent safety hazards.
To learn more about Room temperature visit here:
brainly.com/question/8739174
#SPJ4
In a many-electron atom, only the electrons at the ______ level will participate in covalent bonding.
In a many-electron atom, only the electrons at the outermost energy level will participate in covalent bonding.
The valence shell is the outermost energy level of an atom. It contains the electrons that are most likely to be involved in chemical interactions, such as covalent bonding. Covalent bonding occurs when two atoms share one or more electrons in order to achieve a more stable electron configuration. The electrons in the valence shell of each atom are the ones that are shared in this process. Therefore, only the electrons in the valence shell of a many-electron atom will participate in covalent bonding.
To learn more about covalent bonding click here https://brainly.com/question/14509196
#SPJ11
What did Neil Armstrong earn a master’s degree in from the University of Southern California?
Neil Armstrong earned a Master of Science degree in Aerospace Engineering from the University of Southern California in 1970.
He pursued this degree while working as a NASA astronaut His thesis was focused on the stability of a lunar landing vehicle during the final phase of descent.
In 1962, Armstrong joined NASA as a civilian test pilot and astronaut. He soon became part of the Gemini and Apollo space programs. During his tenure at NASA, he piloted the Gemini 8 mission in 1966. He also commanded the Apollo 11 mission in 1969, where he became the first person to set foot on the Moon.
Learn more about Neil Armstrong, here:
https://brainly.com/question/30763002
#SPJ1
What bonds of the reactants are broken in this reaction? What bonds are formed in the product?
Endothermic bonds of the reactants are broken in this reaction. Exothermic bonds are formed in the product.
Reactants are substances that undergo chemical reactions to form products. They are the starting materials that are consumed during a chemical reaction. Reactants can be either a single element or a compound, and they typically interact with each other in specific ways to produce new chemical compounds.
In a chemical equation, reactants are written on the left side of the arrow, and products are written on the right side. The number of atoms and the type of atoms in the reactants and products must be equal, according to the law of conservation of mass. Chemical reactions occur when reactant molecules collide with sufficient energy to overcome the activation energy barrier. The reactants then rearrange their atoms to form new products with different properties.
To learn more about Reactants visit here:
brainly.com/question/13005466
#SPJ4
What is the concentration of K^+ in 0. 15 M of K_2 S?
The molar concentration of [tex]K^+[/tex] in 0.15 M of [tex]K_2S[/tex] is 0.30 M.
The molar concentration is defined as the number of moles in one liter of solution. It has a unit of Molar or M.
The molar concentration of the solution is 0.15 M. It gives the following ions in an aqueous solution.
[tex]K_2S[/tex] --------> [tex]2K^+[/tex] + [tex]S^{2+[/tex]
The molar concentration of the ions can be calculated by multiplying the stoichiometric coefficient of the ion
Thus, the molar concentration of the ion [tex]S^{2-[/tex] = 0.15
= 0.15 M
Thus, the molar concentration of the ion [tex]K^+[/tex] = 2 * 0.15
= 0.30 M
0.30 M is the molar concentration of ions of potassium.
Learn more about Molar concentration:
https://brainly.com/question/29366031
#SPJ4
3. Which reaction is only experimental?
Fission
Fusion
Both
Nuclear fission is only experimental however, nuclear fusion is not experimental.
What are Nuclear fission and Fusion?Fission generates energy by breaking heavier atoms, such as uranium, into smaller atoms like iodine, cesium, strontium, xenon, and barium, to mention a few.
Fusion, on the other hand, is the joining of light atoms, such as two hydrogen isotopes.
Both are nuclear reactions that generate energy, but they are not the same. Fusion is the joining of two light nuclei to create a larger nucleus, whereas fission is the breaking of a heavy nucleus into two lighter ones.
Learn more about Nuclear fission and Fusion here:
https://brainly.com/question/3992688
#SPJ1
Report Table KSP. 2: Titation Calculations (calcium hydroxide solubility in water) Table view List view Titration of saturated Ca(OH)2 in water with HCI Trial 1 Trial 2 Final buret reading (mL) 12. 65 12. 45 Initial buret reading (mL) 1. 75 1. 81 Volume of HCI added (mL) 10. 9 10. 64 Concentration of OH (M) 0. 000533 0. 000533 Complete the following ICE table using your titration data and the stoichiometry of the dissolution reaction
The average value of [Ca2+] and use to the Ksp of Ca(OH)2 is 1.14 x [tex]10^{-5}[/tex].
The dissolution reaction of calcium hydroxide in water can be represented as:
Ca(OH)2 (s) ⇌ Ca2+ (aq) + 2 OH- (aq)
The ICE table for the dissolution reaction is as follows:
Initial: Ca(OH)2 (s) -- --
Change: - +x +2x
Equilibrium: Ca(OH)2 (s) x 2x
Using the titration data, we can calculate the moles of H+ added to the solution:
Trial 1: 0.0109 L x 0.1045 M = 0.00114 moles H+
Trial 2: 0.01064 L x 0.1045 M = 0.00111 moles H+
Trial 1: [OH-] = 0.00114 moles / (0.025 L x 2) = 0.0228 M
Trial 2: [OH-] = 0.00111 moles / (0.025 L x 2) = 0.0222 M
Using the ICE table, we can calculate the concentration of Ca2+:
Trial 1: [Ca2+] = 2x = 2(0.0228 M) = 0.0456 M
Trial 2: [Ca2+] = 2x = 2(0.0222 M) = 0.0444 M
Finally, we can calculate the average value of [Ca2+] and use it to calculate the Ksp of Ca(OH)2:
[Ca2+]avg = (0.0456 M + 0.0444 M) / 2 = 0.0450 M
Ksp = [Ca2+][OH-]² = (0.0450 M)(0.0225 M)² = 1.14 x [tex]10^{-5}[/tex]
Ksp, or the solubility product constant, is a term used in chemistry to describe the equilibrium constant of a sparingly soluble salt in a solvent. When salt is added to a solvent, it may not completely dissolve due to its limited solubility. At this point, the salt particles in the solution start to interact with the solvent molecules, forming a saturated solution.
The Ksp is a measure of the concentration of ions in the saturated solution, which is in equilibrium with the undissolved salt. It is calculated by multiplying the concentrations of the dissociated ions raised by their stoichiometric coefficients in the balanced chemical equation for the dissolution reaction. Ksp values are unique to each sparingly soluble salt and depend on factors such as temperature, pressure, and the solvent used.
To learn more about Ksp visit here:
brainly.com/question/31384943
#SPJ4
what is the conjugate acid for NH3
The conjugate acid of NH₃ is NH₄⁺, When ammonia accepts a proton (H+), it becomes NH₄⁺. In this reaction, NH₃ is the base and NH₄⁺ is the conjugate acid, because NH₄⁺ is formed by the addition of a proton to NH₃ .
Ammonia (NH₃) is a weak base because it can accept a proton (H+) to form its conjugate acid, ammonium ion (NH₄⁺). In this reaction, ammonia (NH₃) acts as a Bronsted-Lowry base by accepting a proton (H+) to form ammonium ion (NH₄⁺), which acts as a Bronsted-Lowry acid. The key concept to understand here is the relationship between a weak base and its conjugate acid. A weak base can accept a proton to form its conjugate acid, which is always one proton (H+) more than the original weak base.
Learn more about conjugate acids here.
https://brainly.com/question/31229565
#SPJ1
A first-order reaction of A â B has a rate constant of 3.5 s-1. How long will it take for the concentration of A to decrease to 25% of its initial amount?
It will take approximately 0.793 seconds for the concentration of A to decrease to 25% of its initial amount.
The rate law for a first-order reaction is expressed as -d[A]/dt = k[A], where [A] represents the concentration of A and k is the rate constant.
To determine the time required for A to decrease to 25% of its initial amount, we need to use the integrated rate law for a first-order reaction, which is ln([A]/[A]0) = -kt. Here, [A]0 is the initial concentration of A and t is the time elapsed. We can rearrange this equation to solve for t as t = ln([A]0/[A]) / k.
Substituting the given values, we have k = 3.5 s-1 and [A]/[A]0 = 0.25. Plugging these values into the equation, we get t = ln(1/0.25) / 3.5 s-1, which simplifies to t = 0.793 s. Therefore, it will take approximately 0.793 seconds for the concentration of A to decrease to 25% of its initial amount.
To know more about concentration, visit:
https://brainly.com/question/10725862
#SPJ11
Chemistry help!!!! Answer all the blank please and thanks! (WIll give brainliest)
Boric acid is a monoprotic and Lewis acid. B(OH)[tex]_3[/tex] + H[tex]_2[/tex]O ⇌ [BO(OH)[tex]_2[/tex]]− + H[tex]_3[/tex]O+ and HBO[tex]_2[/tex] + H[tex]_2[/tex]O ⇌ [BO[tex]_2[/tex]]− + H[tex]_3[/tex]O+ are the reactions for ionisation of boric acid.
In particular, orthoboric acid is a boron, oxygen, plus hydrogen chemical having the formula B(OH)3. Trihydroxidoboron, hydrogen orthoborate, and boracic acid are other names for it. It occurs naturally as the substance known as sassolite and is typically found as colourless crystals.
A white powder that dissolves in water. It is a weak acid that can react using alcohols to produce borate esters as well as a variety of borate anions and salts. Boric acid is a monoprotic and Lewis acid. B(OH)[tex]_3[/tex] + H[tex]_2[/tex]O ⇌ [BO(OH)[tex]_2[/tex]]− + H[tex]_3[/tex]O+ and HBO[tex]_2[/tex] + H[tex]_2[/tex]O ⇌ [BO[tex]_2[/tex]]− + H[tex]_3[/tex]O+ are the reactions for ionisation of boric acid.
To know more about Boric acid, here:
https://brainly.com/question/14879930
#SPJ1
Distinguish between ionic and covalent compounds under the following properties:
(a) Strength of forces between constituent elements
(b) Solubility of compounds in water
(c) Electrical conduction in substances a) Ionic compounds have strong force of attraction between the oppositely charged ions (e.g Na+Cl−) so they are solids . Covalent compounds have weak force of attractio between their molecules so they are usually liquids or gases.
(b) IOnic compounds are soluble in water but covalent compounds are insoluble in water.
(c) Ionic compounds conduct electricity when dissolved in water or when melted because they contains they (charged particles) But covalent, compounds like glucose do not conduct electricity because they do not contain ions.
(a) Ionic compounds have strong electrostatic forces of attraction and Covalent compounds have weaker forces of attraction between their molecules. (b) Ionic compounds are generally soluble in water, while covalent compounds are often insoluble in water. (c) Ionic compounds conduct electricity when dissolved in water or melted and Covalent compounds, do not conduct electricity.
Ionic and covalent compounds are two types of chemical compounds that differ in their properties. Here are the differences between ionic and covalent compounds based on three properties:
(a) Strength of forces between constituent elements: Ionic compounds are formed by the transfer of electrons from one atom to another, resulting in the formation of ions with opposite charges that are held together by strong electrostatic forces of attraction. Covalent compounds are formed by the sharing of electrons between atoms, resulting in the formation of molecules that are held together by weaker intermolecular forces.
(b) Solubility of compounds in water: Ionic compounds are generally soluble in water because they can dissociate into ions that can be hydrated by water molecules. Covalent compounds are generally insoluble in water because they do not dissociate into ions and are not attracted to water molecules.
(c) Electrical conduction in substances: Ionic compounds can conduct electricity when dissolved in water or when melted because the ions are free to move and carry an electric charge. Covalent compounds do not conduct electricity because they do not have free ions to carry an electric charge.
To know more about Ionic and covalent compounds, refer to the link below:
https://brainly.com/question/14451130#
#SPJ11
How many electron pairs are shared (i.e., how many bonds are present) in each of the following molecules and ions?
1. CO
2. O2
3. ClO
4. CN
1. CO: 3 electron pairs are shared.
2. O₂: Two electron pairs are shared.
3. ClO: 1 electron pair is shared.
4. CN: Three electron pairs are shared.
Here's the information about the shared electron pairs (bonds) in each of the molecules and ions:
1. CO - Carbon Monoxide has a triple bond between C and O, which means 3 electron pairs are shared.
2. O₂ - Oxygen molecule has a double bond between the two O atoms, which means 2 electron pairs are shared.
3. ClO - Chlorine Monoxide has a single bond between Cl and O, which means 1 electron pair is shared.
4. CN - Cyanide ion has a triple bond between C and N, which means 3 electron pairs are shared.
For more such questions on Electron pairs.
https://brainly.com/question/18651326#
#SPJ11
A combustion reaction is given below:
2 C8H18(l) + 25 O2(g) --> 16 CO2(g) + 18 H2O(g)
Which of the following is true about the total number of reactants and the total number of products in the reaction shown below?
Question 7 options:
27 moles of reactants chemically change into 34 moles of products
27 kilograms of reactants chemically change into 34 grams of products
27 atoms of reactants chemically change into 34 atoms of products
27 grams of reactants chemically change into 34 grams of products
27 moles of reactants chemically change into 34 moles of products. Option A
What is a chemical reaction?One or more chemicals, referred to as reactants, are transformed into one or more new substances, referred to as products, during a chemical reaction. Chemical bonds between atoms, ions, or molecules are broken and created during chemical reactions.
When we look at the reaction, we can see that the statement that is true about the total number of reactants and the total number of products in the reaction 27 moles of reactants chemically change into 34 moles of products.
Learn more about reaction:https://brainly.com/question/9601381
#SPJ1
A 9.5 L flask contains 0.85 g O2 at a temperature of 25.8oC. The pressure inside the flask is _______ atm (round your answer to the thousandth place).
The pressure inside the flask is 0.976 atm (rounded to the thousandth place).
We can use the Ideal Gas Law, which states:
PV = nRT
where:
P = pressure
V = volume
n = number of moles
R = gas constant
T = temperature
We can rearrange this equation to solve for the pressure:
P = nRT/V
We are given the volume V = 9.5 L, the number of moles n = 0.85 g / 32 g/mol (since O2 has a molar mass of 32 g/mol), and the temperature T = 25.80C = 298.95 K. The gas constant R is 0.08206 L atm / (mol K).
Substituting these values into the equation, we get:
P = (0.85 g / 32 g/mol) * (0.08206 L atm / (mol K)) * (298.95 K) / (9.5 L)
P = 0.976 atm
Therefore, the pressure inside the flask is 0.976 atm (rounded to the thousandth place).
To learn more about pressure in a flask visit:
brainly.com/question/30003139
Consider the following unbalanced redox reaction: niso4 (aq) cr (s) → ni (s) cr2(so4)3 (aq) how many moles of electrons are transferred in the balanced reaction?
The number of electrons transferred in the balanced reaction NiSO₄(aq) + 2Cr(s) → Ni(s) + Cr₂(SO₄)₃(aq) + 3e⁻ are 3.
To balance the given redox reaction, we need to first identify the oxidation states of the elements in the reactants and products. In NiSO₄, the oxidation state of Ni is +2, while in Ni(s) it is 0. In Cr(s), the oxidation state of Cr is 0, while in Cr₂(SO₄)₃, it is +3.
We can balance the equation by adding electrons (e-) to one of the species. The oxidation half-reaction is,
Cr → Cr³⁺ + 3e⁻
The reduction half-reaction is,
Ni²⁺ + 2e⁻ → Ni
By multiplying the oxidation half-reaction by 2 and adding it to the reduction half-reaction, we get the balanced equation:
NiSO₄(aq) + 2Cr(s) → Ni(s) + Cr₂(SO₄)₃(aq) + 3e⁻
In this balanced equation, 3 moles of electrons are transferred.
To know more about balancing redox reaction, visit,
https://brainly.com/question/27907895
#SPJ4
Complete question - Consider the following unbalanced redox reaction,
NiSO₄(aq) + Cr(s) → Ni(s) + Cr₂(SO₄)₃(aq) how many moles of electrons are transferred in the balanced reaction?
A chemist places CaCO3 in one flask and KBr in another. Water is added to both flasks and the mixture in the first flask is added to the second. Which choice below correctly describes the results of this experiment?
Question 1 options:
Both of the compounds in the flasks will dissolve when water is added and K2CO3 will precipitate from the reaction.
Both of the compounds in the flasks will dissolve when water is added and CaBr2 will precipitate from the reaction.
The CaCO3 will not dissolve in water, but the KBr will dissolve. There is no change upon mixing the two flasks.
The KBr will not dissolve in water, but the CaCO3 will dissolve. There is no change upon mixing the two flasks.
Both of the compounds in the flasks will dissolve when water is added and there is no precipitate from the reaction.
The correct choice is: The CaCO3 will not dissolve in water, but the KBr will dissolve. There is no change upon mixing the two flasks.
This is because calcium carbonate (CaCO3) is insoluble in water, while potassium bromide (KBr) is soluble in water. When water is added to the flask containing CaCO3, it will not dissolve, and the same will happen when water is added to the flask containing KBr. When the two mixtures are combined, there will be no reaction between the two compounds, so no precipitate will form. Therefore, the only compound remaining in the solution will be KBr.
Learn more about calcium carbonate here:
https://brainly.com/question/13565765
#SPJ11
Match the letter of each location along the axon with the correct description of what is occurring at that position.1. At location (C), the membrane potential changes sign (from a positive value to a negative value) and the voltage-gated K+ channels are open.2. At location (F), the axon membrane reaches threshold and the voltage-gated Na+ channels open.3. At location (A), the voltage-gated Na+ channels reactivate.4. At location (D), the voltage-gated Na+ channels are inactivating and the voltage-gated K+ channels are opening.5. At location (G), the axon membrane is at resting potential.6. At location (B), the voltage-gated K+ channels are closing.7. At location (E), the membrane potential changes sign (from a negative value to a positive value) and the voltage-gated Na+ channels are open.As an action potential moves along an axon, one location reaches the rising phase of the action potential, while a nearby location reaches the peak, while another location reaches the falling phase, and so on. You can use the familiar graph of an action potential to pinpoint the stage of the action potential occurring at various locations on the axon as the action potential moves along. For example, at location (f), the action potential has just startedâthe membrane has reached threshold and the voltage-gated Na+ channels open. At location (d), the action potential is at its peakâthe voltage-gated Na+ channels inactivate and the voltage-gated K+ channels open.
Locations along the axon with the correct description of the processes occurring at that position.
1. Location (B) - At this location, the voltage-gated K⁺ channels are closing.
2. Location (F) - At this location, the axon membrane reaches threshold and the voltage-gated Na⁺ channels open.
3. Location (A) - At this location, the voltage-gated Na⁺ channels reactivate.
4. Location (D) - At this location, the voltage-gated Na⁺ channels are inactivating and the voltage-gated K⁺ channels are opening.
5. Location (G) - At this location, the axon membrane is at resting potential.
6. Location (C) - At this location, the membrane potential changes sign (from a positive value to a negative value) and the voltage-gated K⁺ channels are open.
7. Location (E) - At this location, the membrane potential changes sign (from a negative value to a positive value) and the voltage-gated Na⁺ channels are open.
As an action potential moves along an axon, different locations reach different stages of the action potential. Voltage-gated Na⁺ channels open at threshold (location F), leading to depolarization and the rising phase of the action potential. At the peak of the action potential (location D), the voltage-gated Na⁺ channels inactivate, and voltage-gated K⁺ channels open, leading to repolarization and the falling phase of the action potential.
At resting potential (location G), neither voltage-gated Na⁺ nor K⁺ channels are open. The voltage-gated K⁺ channels are closing at location B, and reactivating Na⁺ channels are present at location A. Finally, at location C, the membrane potential changes sign and the voltage-gated K⁺ channels are open, contributing to further repolarization.
To know more about the action potential refer here :
https://brainly.com/question/30701189#
#SPJ11
A sample of formic acid (CH2O2) contains 4.01 x 1025 molecules. How many moles of formic acid are in this sample?
We can use Avogadro's number to convert the number of molecules to moles. Avogadro's number is 6.022 x 10^23 molecules per mole.
First, we need to determine how many moles of formic acid are represented by 4.01 x 10^25 molecules:
n = N / NA
where n is the number of moles, N is the number of molecules, and NA is Avogadro's number.
Substituting the given values, we get:
n = 4.01 x 10^25 / (6.022 x 10^23) = 66.6 moles
Therefore, the sample of formic acid contains 66.6 moles of formic acid.