Right triangle. Find the exact values of x and y.​

Approximately 0.62% of the steel rods manufactured by the company are defective, as they have a diameter of less than 1.95 inches.

We have a question involving the normal distribution of steel rod diameters with a mean of 2 inches and a standard deviation of 0.02 inches and we want to find the percentage of defective rods with a diameter less than 1.95 inches.

To find the percentage of defective rods, we need to calculate the z-score for the threshold diameter of 1.95 inches using the given mean and standard deviation.

The z-score formula is:
z = (x - μ) / σ
where z is the z-score, x is the value (1.95 inches), μ is the mean (2 inches), and σ is the standard deviation (0.02 inches).

Step 1: Calculate the z-score
z = (1.95 - 2) / 0.02
z = -0.05 / 0.02
z = -2.5

Step 2: Find the percentage of rods below this z-score
Using a standard normal distribution table or calculator, we find the probability associated with a z-score of -2.5, which is approximately 0.0062 or 0.62%.

Learn more about diameter:

https://brainly.com/question/10907234

#SPJ11

Answer:

64

Step-by-step explanation:

the total must be 60×4 =240

subtract the miles already given and that us your answer. You could also make an equation. (64+53+59+x)/4=

To determine the number of ways to select five male and five female members for the organization's board of directors, we'll use the combination formula C(n, r) = n! / (r! * (n-r)!). So, there are 132,819,072 ways to select five male and five female members for the organization's board of directors.

C(20, 5) = 20! / (5! * (20-5)!)

C(20, 5) = 20! / (5! * 15!)

C(20, 5) = 15,504

know more about combination formula here: https://brainly.com/question/28065038

#SPJ11

Answer:

The measure of the angle of elevation for each ramp can be found using trigonometry. In this case, we can use the tangent function, which is defined as the ratio of the opposite side to the adjacent side in a right triangle.

Let's consider a right triangle where the opposite side is the height of the parking garage level (22 feet) and the adjacent side is the length of the ramp (122 feet). The angle of elevation is the angle between the ground and the line of sight from the base of the ramp to the top of the parking garage level.

Using the tangent function:

tan(angle) = opposite/adjacent

tan(angle) = 22/122

angle = arctan(22/122)

Using a calculator, we can find that the arctan(22/122) is approximately 10.3 degrees. So, the measure of the angle of elevation for each ramp is approximately 10.3 degrees. This means that the ramps are inclined at an angle of 10.3 degrees with respect to the ground.

The relationship between Bernoulli, binomial, and Poisson distributions is fundamental in probability theory. The binomial distribution is the probability distribution of a series of independent Bernoulli trials, where each trial has a binary outcome of success or failure with probability P. The Poisson distribution, on the other hand, describes the probability of a given number of events occurring in a fixed interval of time or space, given the expected number of events per interval.

To show that the binomial distribution approaches a Poisson distribution as the number of trials approaches infinity and the probability of success approaches zero, we can use the following argument:

Suppose we have N independent Bernoulli trials, each with probability P of success. The number of successes X in these N trials follows a binomial distribution with parameters N and P, denoted by X ~ B(N,P).

The mean and variance of a binomial distribution are given by:

E[X] = NP
Var[X] = NP(1-P)

Now, suppose we let N → ∞ and P → 0, such that NP = λ, a constant. This means that as N gets larger, the probability of success gets smaller, but the expected number of successes λ remains constant.

Using this limit, we can rewrite the binomial distribution as:

P(X=k) = (N choose k) P^k (1-P)^(N-k)
= (N(N-1)...(N-k+1)/k!) P^k (1-P)^(N-k)
= λ^k / k! * (N(N-1)...(N-k+1) / N^k) * (1-P)^(N) * (1-P)^(-k)

Now, we can take the limit as N → ∞ and P → 0 while keeping λ = NP constant. The last term goes to 1, and the middle term can be shown to approach 1 using the fact that (1+x/N)^N → e^x as N → ∞. This leaves us with:

lim(N→∞,P→0) P(X=k) = e^(-λ) * λ^k / k!

which is the probability mass function of a Poisson distribution with parameter λ. Therefore, as N → ∞ and P → 0, such that NP = λ, the binomial distribution approaches a Poisson distribution with parameter λ.

learn more about 'probability';https://brainly.com/question/31697304

#SPJ11

The 90% confidence interval for the proportion of 8th graders involved in after school activities is c) (0.780, 0.900).

To find the confidence interval, we need to use the formula:

CI = p ± zα/2 * √(p(1-p)/n)

where:

p is the sample proportion (84% or 0.84 in decimal form)

zα/2 is the z-score for the desired confidence level (90% or 1.645 for a two-tailed test)

n is the sample size (100)

Substituting the values, we get:

CI = 0.84 ± 1.645 * √(0.84(1-0.84)/100)

CI = 0.84 ± 0.078

CI = (0.762, 0.918)

Rounding to three decimal places, we get the final answer of (0.780, 0.900) as the confidence interval for the proportion of 8th graders involved in after school activities. Therefore, the correct answer is (c).

For more questions like Z-score click the link below:

https://brainly.com/question/15016913

#SPJ11

The value of simplify expression is,

⇒ (2x² + 10x + 6) / (x ² + 8x + 15)

We have to given that;

The expression is,

⇒ x/(x +3) + (x + 2) / (x+5)

Now, We can simplify as;

⇒ x (x + 5) + (x + 3) (x + 2) / (x+ 3) (x + 5)

⇒ (x² + 5x + x² + 3x + 2x + 6) (x² + 3x + 5x + 15)

⇒ (2x² + 10x + 6) / (x ² + 8x + 15)

Thus, The value of simplify expression is,

⇒ (2x² + 10x + 6) / (x ² + 8x + 15)

Learn more about the mathematical expression visit:

brainly.com/question/1859113

#SPJ1

Answer:

Step-by-step explanation:

A number r has 8 added to it

r+8

Then the result is multiplied by 4

To make sure the addition is done first, use PEMDAS

so add a parenthesis so addition goes before multiplication

(r+8) * 4

or 4*(r+8)

The set G represents the circle centered at (0,1) with radius 1 in the two-dimensional real coordinate plane. Its properties can be studied using concepts from Real analysis 2 such as metric spaces and topology.

To answer this question, we need to first understand what the terms "Real analysis 1" and "Real analysis 2" mean. Real analysis is a branch of mathematics that deals with the rigorous study of real numbers and their properties. Real analysis 1 typically covers topics such as limits, continuity, differentiation, and integration of functions of a single variable. Real analysis 2 typically covers more advanced topics such as metric spaces, topology, and functional analysis.

Now, let's look at the given question. We are given two points O = (0,0) and a = (2,-1) in R2, which is the two-dimensional real coordinate plane. We are asked to set G = Bd?(0,1), where Bd?(0,1) denotes the boundary of the open disk centered at (0,1) with radius 1.

To understand what G represents, we need to first find the distance between any point v = (x,y) in R2 and (0,1). The distance between two points (x1,y1) and (x2,y2) in R2 is given by the distance formula:

d((x1,y1),(x2,y2)) = sqrt((x2-x1)^2 + (y2-y1)^2)

Using this formula, we can find the distance between (0,1) and any point v = (x,y) in R2 as:

d((0,1),v) = sqrt((x-0)^2 + (y-1)^2) = sqrt(x^2 + (y-1)^2)

So, G is the set of all points in R2 whose distance from (0,1) is exactly 1. In other words, G is the circle centered at (0,1) with radius 1. We can write this set as:

G = {(x,y) € R2: sqrt(x^2 + (y-1)^2) = 1}

To visualize this set, we can plot the points (0,1), (1,0), (-1,0), and (0,2) on the coordinate plane, and then draw a circle passing through these points with center (0,1) and radius 1. This circle represents the set G.

In terms of Real analysis, we can use the concepts of metric spaces and topology to study the properties of G. For example, we can show that G is a closed set in R2, since its complement (the set of points in R2 whose distance from (0,1) is not exactly 1) is open. We can also show that G is connected and simply connected, since it is a circle with no holes or gaps.

In conclusion, we can state that the set G represents the circle centered at (0,1) with radius 1 in the two-dimensional real coordinate plane. Its properties can be studied using concepts from Real analysis 2 such as metric spaces and topology.

To learn more about real analysis visit : https://brainly.com/question/15586347

#SPJ11

Answer:

THESE NUTS

Step-by-step explanation:

Answer:

[tex]\huge\boxed{\sf \$400}[/tex]

Step-by-step explanation:

Value of phone = $500

Loss in price = 1/5 of total price

= 1/5 × 500     (of means to multiply)

= 1 × 100

= $100

= Actual price - loss

= 500 - 100

[tex]\rule[225]{225}{2}[/tex]

The perimeter of triangle ABC is 40 cm and the area is 84.85 cm^2.

To get the length of AB in triangle ABC, we can use the Pythagorean theorem since we are given the lengths of sides BC and AC. Using the theorem, we get:
AB^2 = BC^2 + AC^2
AB^2 = 15^2 + 8^2
AB^2 = 225 + 64
AB^2 = 289
AB = √289
AB = 17 cm
Therefore, the length of AB is 17 cm.
To find the perimeter of triangle ABC, we need to add up the lengths of all three sides:
Perimeter = AB + BC + AC
Perimeter = 17 + 15 + 8
Perimeter = 40 cm
To get the area of triangle ABC, we can use the formula: Area = (1/2) x base x height
Since we do not know the height of triangle ABC, we can use the length of side AB as the base and draw a perpendicular line from point C to AB, creating a right triangle. This right triangle has base AB and height h, which we can solve for using the Pythagorean theorem:
h^2 = AC^2 - (AB/2)^2
h^2 = 8^2 - (17/2)^2
h^2 = 64 - 144.5
h^2 = -80.5 (not a possible value)
However, we can see that the height of triangle ABC is outside the triangle, meaning that the triangle is obtuse and the height extends beyond the opposite side. Therefore, we cannot use the formula for the area of a triangle with a right triangle base.
Instead, we can use Heron's formula, which is:
Area = √(s(s-a)(s-b)(s-c))
where s is the semi-perimeter (half of the perimeter), and a, b, and c are the lengths of the sides. In this case, we have:
s = (a + b + c)/2 = (17 + 15 + 8)/2 = 20
a = AB = 17
b = BC = 15
c = AC = 8
Plugging these values into the formula, we get: Area = √(20(20-17)(20-15)(20-8))
Area = √(20(3)(5)(12))
Area = √(7200)
Area = 84.85 cm^2
Therefore, the perimeter of triangle ABC is 40 cm and the area is 84.85 cm^2.

Learn more about perimeter here, https://brainly.com/question/24571594

#SPJ11

The calculated value of the probability P(yellow) is 0.5 i.e. one half

From the question, we have the following parameters that can be used in our computation:

Sections = 2

Color = yellow, and green

Using the above as a guide, we have the following:

Yellow = 1

When the yellow section is selected, we have

P(yellow) = yellow/section

The required probability is

P(yellow) = 1/2

Evaluate

P(yellow) = 0.5

Hence, the value is 0.5

Read more probability at

https://brainly.com/question/24756209

#SPJ1

A rectangle with a length less than 10 feet and an area between 55 and 65 square feet.

Let's call the length of the rectangle "l" and the width "w". We know that the area of a rectangle is given by the formula A = lw. We also know that the area of the rug must be between 55 and 65 square feet. Therefore:

55 ≤ lw ≤ 65

Since the length of the rectangle must be less than 10 feet, we have:

l < 10

We can use these two conditions to draw a rectangle that satisfies both requirements. For example, we could draw a rectangle with a length of 8 feet and a width of 7 feet, which gives an area of 56 square feet. This rectangle satisfies both conditions since 55 ≤ 56 ≤ 65 and 8 < 10.

Learn more about Rectangle

https://brainly.com/question/25292087

#SPJ4

We can find its derivative and evaluate it at x=36 to find the slope of the tangent line, and then use the point-slope formula to find the equation of the line.

To find the derivative of y = Vx, we use the power rule, which states that if y = xn, then y' = nx^(n-1). In this case, y = Vx⁽¹/²⁾, so y' = V(1/2)x(-1/2) = V/(2sqrt(x)). Evaluating this at x=36, we get y' = V/12. Therefore, the slope of the tangent line is m = V/12. Using the point-slope formula, we get the equation of the tangent line as y - 6 = (V/12)(x - 36).

In summary, to find the equation of the tangent line to the curve at the point (36,6), we first found the derivative of the function y = [tex]Vx^{1/2}[/tex], which is y' = V/(2sqrt(x)). Evaluating this at x=36, we get y' = V/12, which is the slope of the tangent line. Using the point-slope formula, we then found the equation of the tangent line as y - 6 = (V/12)(x - 36).

To explain this answer in more detail, we can first note that the function

y = [tex]Vx^{1/2}[/tex]  represents a square root function with a vertical stretch factor of V. This means that the graph of the function is a curve that starts at the origin and increases slowly at first, then more rapidly as x gets larger. The point (36,6) is on this curve, and we are asked to find the equation of the tangent line to the curve at this point.

To find the slope of the tangent line, we use the formula Mtan = lim f(x) - f(a)/ x-a\a, where f(x) is the function and a is the point where we want to find the tangent line. In this case, a = 36 and f(x) = Vx^(1/2), so we have [tex]Mtan=lim Vx^{1/2} - V(36)^{1/2}/ x-36/a[/tex]. We can simplify this expression by multiplying the numerator and denominator by the conjugate of the numerator, which is [tex]Vx^{1/2} +V(36)x^{1/2}[/tex] As x approaches 36, we can use L' Hopital's rule to evaluate the limit, which gives us Mtan = V/12.

Now that we have the slope of the tangent line, we can use the point-slope formula to find the equation of the line. The point-slope formula states that if the slope of a line is m and a point on the line is (x1,y1), then the equation of the line is y - y1 = m(x - x1). In this case, the point is (36,6) and the slope is V/12, so the equation of the tangent line is y - 6

Learn more about tangent:

brainly.com/question/10053881

#SPJ11

The simplified expression is [tex]21x^2 - 25x - 28[/tex] in the given case.

An expression in mathematics is a combination of numbers, symbols, and operators (such as +, -, x, ÷) that represents a mathematical phrase or idea. Expressions can be simple or complex, and they can contain variables, constants, and functions.

"Expression" generally refers to a combination of numbers, symbols, and/or operations that represents a mathematical, logical, or linguistic relationship or concept. The meaning of an expression depends on the context in which it is used, as well as the specific definitions and rules that apply to the symbols and operations involved. For example, in the expression "2 + 3", the plus sign represents addition and the meaning of the expression is "the sum of 2 and 3", which is equal to 5.

To simplify the expression, first distribute the -3x and (3x + 4) terms:

[tex]-3x(4 - 5x) + (3x + 4)(2x - 7) = -12x + 15x^2 + (6x^2 - 21x + 8x - 28)[/tex]

Next, combine like terms:

[tex]-12x + 15x^2 + (6x^2 - 21x + 8x - 28) = 21x^2 - 25x - 28[/tex]

Therefore, the simplified expression is [tex]21x^2 - 25x - 28.[/tex]

To know more about expression here

https://brainly.com/question/1859113

#SPJ4

Answer:

Point form:

(1,-4)

Equation form:

x=1,y=-4

Step-by-step explanation:

Answer:

Step-by-step explanation:

The solution to the system of equations by substitution is x = 1 and y = -4.

To solve the system of equations by substitution, we can substitute the expression for y from the first equation (-4x) into the second equation (y = x - 5), resulting in -4x = x - 5. By rearranging the equation and solving for x, we get x = 1. Substituting this value back into the first equation, we find y = -4.

For more examples and explanations on solving systems of equations using substitution, check out this article https://brainly.in/question/25509377

The coordinate of the point after the translation will be (-6, -2).

Given that:

Point, (11, -4)

Transformation rule, (x - 17, y + 2)

The translation does not change the shape and size of the geometry. But changes the location.

The coordinate of the point after the translation is calculated as,

⇒ (x - 17, y + 2)

⇒ (11 - 17, -4 + 2)

⇒ (-6, -2)

More about the transformation of the shape link is given below.

https://brainly.com/question/27224339

#SPJ1

Answer: An obtuse angle is an angle that measures between 90 and 180 degrees. An obtuse angle is wider than a right angle but narrower than a straight angle.

Step-by-step explanation:

Answer:

Obtuse angle is any angle greater than 90°: Straight angle is an angle measured equal to 180°: Zero angle is an angle measured equal to 0°: Complementary angles are angles whose measures have a sum equal to 90°: Supplementary angles are angles whose measures have a sum equal to 180°.

The 99% confident interval for the difference in population proportions of people in the eastern half and western half of the country who fly to visit family members for the winter holidays is between  -0.407 and -0.013.

The following formula can be used to create a confidence interval for the difference in population proportions:

CI = (p1 - p2) ± z√((p1(1-p1)/n1) + (p2(1-p2)/n2))

where:

p1 = proportion of people in the eastern half who fly to visit family members

p2 = proportion of people in the western half who fly to visit family members

n1 = sample size from the eastern half

n2 = sample size from the western half

z = critical value for the appropriate level of confidence from the standard normal distribution

We want a 99% confidence interval, so z = 2.576.

Plugging in the values we have:

p1 = 42/96 = 0.4375

p2 = 81/108 = 0.75

n1 = 96

n2 = 108

CI = (0.4375 - 0.75) ± 2.576√((0.4375(1-0.4375)/96) + (0.75*(1-0.75)/108))

CI = (-0.407, -0.013)

Therefore, we have 99% confidence that the actual difference in population proportions of those traveling by plane to see family for the winter holidays in the eastern and western halves of the nation is between -0.407 and -0.013.

This shows that a bigger percentage of people go by plane to see family over the winter vacations in the western part of the country.

Learn more about confidence interval at https://brainly.com/question/18296078

#SPJ11

The sum of the first 19 terms of the arithmetic sequence is 532.

We can find the sum of an arithmetic sequence by using the formula:

S = (n/2)(a1 + an)

where S is the sum of the first n terms of the sequence, a1 is the first term, and an is the nth term.

In this case, the first term is 1, and the common difference is 3 (since each term is 3 more than the previous term). So the nth term is:

an = a1 + (n - 1)d

an = 1 + (n - 1)3

an = 3n - 2

We want to find the sum of the first 19 terms, so:

n = 19

an = 3(19) - 2

an = 55

Now we can plug in the values into the formula:

S = (n/2)(a1 + an)

S = (19/2)(1 + 55)

S = 19(28)

S = 532

Therefore, the sum of the first 19 terms of the arithmetic sequence is 532.

To know more about   arithmetic sequence, here

https://brainly.com/question/6561461

#SPJ4

To calculate the area of regular polygons with sides of length 1, 2, or 3 units, we need to calculate the Perimeter and Apothem using the appropriate formulas and then use the formula A = 1/2 * Perimeter * Apothem to obtain the area.

The area of a regular polygon can be calculated using the formula A = 1/2 * Perimeter * Apothem, where A is the area, Perimeter is the sum of all sides, and Apothem is the distance from the center of the polygon to the midpoint of any side.

For a regular polygon with sides of length 1, the Perimeter would be the product of the number of sides (also called the polygon's order) and the length of each side. Therefore, the Perimeter would be 1 x n, where n is the number of sides. The Apothem can be calculated using the formula Apothem = [tex]$\frac{1}{2}\left(\frac{1}{\tan\left(\frac{\pi}{n}\right)}\right)$[/tex], where π is pi and n is the number of sides. Substituting the values, we get Apothem = [tex]$\frac{1}{2}\left(\frac{1}{\tan\left(\frac{\pi}{n}\right)}\right)$[/tex]. Finally, we can use these values in the formula for area to get the area of the polygon.

Similarly, for a regular polygon with sides of length 2, we would use 2n as the Perimeter and the Apothem would be calculated using the same formula as before. For a polygon with sides of length 3, we would use 3n as the Perimeter and again calculate the Apothem using the same formula.

To learn more about regular polygons

https://brainly.com/question/29722724

#SPJ4

Complete question:

What is the method for calculating the area of regular polygons with sides of length 1, 2, and 3 units?

The  area of Henry's flower bed would be 2500 square feet.

Let's start by finding the perimeter of Henry's flower bed since we know that he wants it to be a square. If we let s be the length of one side of the square, then the perimeter would be:

4s = 200

Simplifying this equation, we get:

s = 50

So Henry's flower bed will have sides of 50 feet each.

To find the area of the flower bed, we can use the formula:

Area = side^2

So in this case, the area would be:

Area = 50^2 = 2500 square feet

Therefore, the area of Henry's flower bed would be 2500 square feet.

Visit to know more about Area:-

brainly.com/question/2607596

#SPJ11

The appropriate formula for estimating f'(1) if h > 0 is D, which is f'(x) = f(x+h) - f(x-h). This is because the formula uses the values of the function at two points that are equidistant from the point at which the derivative is being estimated, which is x=1 in this case. Additionally, this formula uses a discrete difference approach, which is appropriate for estimating derivatives given discrete data points.

The step size h between the data points is defined as h = 1/n, where n is the number of discrete data points for the function f(x) for values of x from 0 to 1.

We must determine the values of the function at x = 1+h and x = 1-h in order to estimate the first derivative of f(x) at x = 1 using the central difference approach.

Depending on where the data points are located, we can extrapolate or interpolate using the given data points to predict the function value at x = 1+h and x = 1-h.

Once we know the values of the function at x = 1+h and x = 1-h, we may estimate the first derivative at x = 1 using the central difference approach and the formula D, which is f'(x) = f(x+h) - f(x-h).

The value of h should be big enough to prevent rounding errors while still being small enough to offer an accurate approximation of the derivative. H typically has a value of 0.001.

This formula only applies to smooth functions; it may not be effective for functions with abrupt corners or discontinuities. This is a crucial point to remember. Other techniques for determining the derivative might be more suitable in such circumstances.

Learn more about derivatives :

https://brainly.com/question/25324584

#SPJ11

Answer:

x = { 0 , -1 , 10 }

Step-by-step explanation:

Hope this helps!

Answer: -10<x<0 or x>1

Step-by-step explanation:

Let's solve your inequality step-by-step.

x^3+9x^2-10x>0

Let's find the critical points of the inequality.

x^3+9x^2-10x=0

x(x-1)(x+10)=0 (Factor left side of equation)

x=0 or x-1=0 or x+10=0 (Set factors equal to 0)

x=0 or x=1 or x= -10

Check intervals in between critical points. (Test values in the intervals to see if they work.)

x<-10 (Doesn't work in original inequality)

-10<x<0 (Works in original inequality)

x<0<1 (Doesn't work in original inequality)

x>1 (Works in original inequality)

Answer: -10 < x < 0 OR x > 1

The solution for b is y-mx in the equation y=mx+b.

The given equation is y=mx+b

y equal r=to m times of x plus b

We need to solve for b in the equation

To solve we have to isolate b from the equation

Subtract mx from both sides

y-mx=b

Hence, the solution for b is y-mx in the equation y=mx+b.

To learn more on Equation:

https://brainly.com/question/10413253

#SPJ1

The level of significance, typically set at 0.05, is used to determine whether the observed difference is statistically significant or simply due to chance

To determine whether the difference between groups is statistically significant, you would typically use a hypothesis test such as a t-test, ANOVA (analysis of variance), or a chi-square test. These tests are used to compare the means or proportions of different groups and calculate the probability of obtaining the observed difference by chance. The level of significance, typically set at 0.05, is used to determine whether the observed difference is statistically significant or simply due to chance. To determine if the difference between groups is statistically significant, you can use a hypothesis test called the t-test. The t-test compares the means of two groups and takes into account the sample size and variance within each group. This test helps you determine if there is a significant difference between the groups or if the observed difference is due to random chance.

learn more about level of significance

https://brainly.com/question/13947717

#SPJ11